C++ rtw_netdev_priv函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中rtw_netdev_priv函数的典型用法代码示例。如果您正苦于以下问题：C++ rtw_netdev_priv函数的具体用法？C++ rtw_netdev_priv怎么用？C++ rtw_netdev_priv使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了rtw_netdev_priv函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: proc_get_rf_reg_dump4

int proc_get_rf_reg_dump4(char *page, char **start,
			  off_t offset, int count,
			  int *eof, void *data)
{
	struct net_device *dev = data;
	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
	int len = 0;
	int i,j=1,path;
	u32 value;

	len += snprintf(page + len, count - len, "\n======= RF REG =======\n");
	path = 2;
	len += snprintf(page + len, count - len, "\nRF_Path(%x)\n",path);
	for(i=0xC0;i<0x100;i++)
	{
		//value = PHY_QueryRFReg(padapter, (RF90_RADIO_PATH_E)path,i, bMaskDWord);
		value = rtw_hal_read_rfreg(padapter, path, i, 0xffffffff);
		if(j%4==1)	len += snprintf(page + len, count - len, "0x%02x ",i);
		len += snprintf(page + len, count - len, " 0x%08x ",value);
		if((j++)%4==0)	len += snprintf(page + len, count - len, "\n");
	}
	*eof = 1;
	return len;
}

开发者ID:abgoyal，项目名称:alcatel_ot_4020D_kernel，代码行数:24，代码来源:rtw_debug.c

示例2: proc_set_rx_stbc

ssize_t proc_set_rx_stbc(struct file *file, const char __user *buffer, size_t count, loff_t *pos, void *data)
{
	struct net_device *dev = data;
	struct adapter *padapter = (struct adapter *)rtw_netdev_priv(dev);
	struct registry_priv *pregpriv = &padapter->registrypriv;
	char tmp[32];
	u32 mode;

	if (count < 1)
		return -EFAULT;

	if (buffer && !copy_from_user(tmp, buffer, sizeof(tmp))) {
		sscanf(tmp, "%d ", &mode);

		if (pregpriv && (mode == 0 || mode == 1 ||
		    mode == 2 || mode == 3)) {
			pregpriv->rx_stbc = mode;
			printk("rx_stbc =%d\n", mode);
		}
	}

	return count;

}

开发者ID:yaozhiman，项目名称:rtl8723bs，代码行数:24，代码来源:rtw_debug.c

示例3: proc_get_trx_info

int proc_get_trx_info(struct seq_file *m, void *v)
{
	struct net_device *dev = m->private;
	int i;
	struct adapter *padapter = (struct adapter *)rtw_netdev_priv(dev);
	struct xmit_priv *pxmitpriv = &padapter->xmitpriv;
	struct recv_priv  *precvpriv = &padapter->recvpriv;
	struct hw_xmit *phwxmit;

	DBG_871X_SEL_NL(m, "free_xmitbuf_cnt =%d, free_xmitframe_cnt =%d\n"
		, pxmitpriv->free_xmitbuf_cnt, pxmitpriv->free_xmitframe_cnt);
	DBG_871X_SEL_NL(m, "free_ext_xmitbuf_cnt =%d, free_xframe_ext_cnt =%d\n"
		, pxmitpriv->free_xmit_extbuf_cnt, pxmitpriv->free_xframe_ext_cnt);
	DBG_871X_SEL_NL(m, "free_recvframe_cnt =%d\n"
		, precvpriv->free_recvframe_cnt);

	for (i = 0; i < 4; i++)
	{
		phwxmit = pxmitpriv->hwxmits + i;
		DBG_871X_SEL_NL(m, "%d, hwq.accnt =%d\n", i, phwxmit->accnt);
	}

	return 0;
}

开发者ID:yaozhiman，项目名称:rtl8723bs，代码行数:24，代码来源:rtw_debug.c

示例4: proc_get_rf_reg_dump1

int proc_get_rf_reg_dump1(char *page, char **start,
			  off_t offset, int count,
			  int *eof, void *data)
{
	struct net_device *dev = data;
	struct adapter *padapter = (struct adapter *)rtw_netdev_priv(dev);
	int len = 0;
	int i, j = 1, path;
	u32 value;

	len += snprintf(page + len, count - len, "\n======= RF REG =======\n");
	path = 1;
	len += snprintf(page + len, count - len, "\nRF_Path(%x)\n", path);
	for (i = 0; i < 0xC0; i++) {
		value = rtw_hal_read_rfreg(padapter, path, i, 0xffffffff);
		if (j%4 == 1)
			len += snprintf(page + len, count - len, "0x%02x ", i);
		len += snprintf(page + len, count - len, " 0x%08x ", value);
		if ((j++)%4 == 0)
			len += snprintf(page + len, count - len, "\n");
	}
	*eof = 1;
	return len;
}

开发者ID:7799，项目名称:linux，代码行数:24，代码来源:rtw_debug.c

示例5: proc_get_rx_signal

int proc_get_rx_signal(char *page, char **start,
			  off_t offset, int count,
			  int *eof, void *data)
{
	struct net_device *dev = data;
	struct adapter *padapter = (struct adapter *)rtw_netdev_priv(dev);
	int len = 0;

	len = snprintf(page + len, count,
		"rssi:%d\n"
		"rxpwdb:%d\n"
		"signal_strength:%u\n"
		"signal_qual:%u\n"
		"noise:%u\n",
		padapter->recvpriv.rssi,
		padapter->recvpriv.rxpwdb,
		padapter->recvpriv.signal_strength,
		padapter->recvpriv.signal_qual,
		padapter->recvpriv.noise
		);

	*eof = 1;
	return len;
}

开发者ID:7799，项目名称:linux，代码行数:24，代码来源:rtw_debug.c

示例6: rtw_netdev_priv

struct proc_dir_entry *rtw_dm_proc_init(struct net_device *dev)
{
	struct proc_dir_entry *dir_dm = NULL;
	struct proc_dir_entry *entry = NULL;
	_adapter	*adapter = rtw_netdev_priv(dev);
	ssize_t i;

	if (adapter->dir_dev == NULL) {
		rtw_warn_on(1);
		goto exit;
	}

	if (adapter->dir_dm != NULL) {
		rtw_warn_on(1);
		goto exit;
	}

	dir_dm = rtw_proc_create_dir("dm", adapter->dir_dev, dev);
	if (dir_dm == NULL) {
		rtw_warn_on(1);
		goto exit;
	}

	adapter->dir_dm = dir_dm;

	for (i=0;i<dm_proc_hdls_num;i++) {
		entry = rtw_proc_create_entry(dm_proc_hdls[i].name, dir_dm, &rtw_dm_proc_fops, (void *)i);
		if (!entry) {
			rtw_warn_on(1);
			goto exit;
		}
	}

exit:
	return dir_dm;
}

开发者ID:abrakev，项目名称:RTL-8188C-8192C，代码行数:36，代码来源:rtw_proc.c

示例7: proc_set_rx_signal

int proc_set_rx_signal(struct file *file, const char *buffer,
		unsigned long count, void *data)
{
	struct net_device *dev = (struct net_device *)data;
	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
	char tmp[32];
	u32 is_signal_dbg, signal_strength;

	if (count < 1)
		return -EFAULT;

	if (buffer && !copy_from_user(tmp, buffer, sizeof(tmp))) {

		int num = sscanf(tmp, "%u %u", &is_signal_dbg, &signal_strength);

		is_signal_dbg = is_signal_dbg==0?0:1;

		if(is_signal_dbg && num!=2)
			return count;

		signal_strength = signal_strength>100?100:signal_strength;
		signal_strength = signal_strength<0?0:signal_strength;

		padapter->recvpriv.is_signal_dbg = is_signal_dbg;
		padapter->recvpriv.signal_strength_dbg=signal_strength;

		if(is_signal_dbg)
			DBG_871X("set %s %u\n", "DBG_SIGNAL_STRENGTH", signal_strength);
		else
			DBG_871X("set %s\n", "HW_SIGNAL_STRENGTH");

	}

	return count;

}

开发者ID:takitr，项目名称:linux-wetek-3.10.y-1，代码行数:36，代码来源:rtw_debug.c

示例8: proc_set_best_channel

int proc_set_best_channel(struct file *file, const char *buffer,
		unsigned long count, void *data)
{
	struct net_device *dev = (struct net_device *)data;
	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
	struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv;
	char tmp[32];

	if(count < 1)
		return -EFAULT;

	if(buffer && !copy_from_user(tmp, buffer, sizeof(tmp)))
	{
		int i;
		for(i = 0; pmlmeext->channel_set[i].ChannelNum != 0; i++)
		{
			pmlmeext->channel_set[i].rx_count = 0;
		}

		DBG_871X("set %s\n", "Clean Best Channel Count");
	}

	return count;
}

开发者ID:OpenLD，项目名称:linux-wetek-3.10.y，代码行数:24，代码来源:rtw_debug.c

示例9: netdev_br_init

void netdev_br_init(struct net_device *netdev)
{
	struct adapter *adapter = (struct adapter *)rtw_netdev_priv(netdev);

	rcu_read_lock();

	if (rcu_dereference(adapter->pnetdev->rx_handler_data)) {
		struct net_device *br_netdev;
		struct net *devnet = NULL;

		devnet = dev_net(netdev);
		br_netdev = dev_get_by_name(devnet, CONFIG_BR_EXT_BRNAME);
		if (br_netdev) {
			memcpy(adapter->br_mac, br_netdev->dev_addr, ETH_ALEN);
			dev_put(br_netdev);
		} else {
			pr_info("%s()-%d: dev_get_by_name(%s) failed!",
				__func__, __LINE__, CONFIG_BR_EXT_BRNAME);
		}
	}
	adapter->ethBrExtInfo.addPPPoETag = 1;

	rcu_read_unlock();
}

开发者ID:marceleng，项目名称:linux，代码行数:24，代码来源:os_intfs.c

示例10: rtw_proc_remove_one

void rtw_proc_remove_one(struct net_device *dev)
{
	struct proc_dir_entry *dir_dev = NULL;
	struct adapter	*padapter = rtw_netdev_priv(dev);
	u8 rf_type;

	dir_dev = padapter->dir_dev;
	padapter->dir_dev = NULL;

	if (dir_dev) {
		remove_proc_entry("write_reg", dir_dev);
		remove_proc_entry("read_reg", dir_dev);
		remove_proc_entry("fwstate", dir_dev);
		remove_proc_entry("sec_info", dir_dev);
		remove_proc_entry("mlmext_state", dir_dev);
		remove_proc_entry("qos_option", dir_dev);
		remove_proc_entry("ht_option", dir_dev);
		remove_proc_entry("rf_info", dir_dev);
		remove_proc_entry("ap_info", dir_dev);
		remove_proc_entry("adapter_state", dir_dev);
		remove_proc_entry("trx_info", dir_dev);
		remove_proc_entry("mac_reg_dump1", dir_dev);
		remove_proc_entry("mac_reg_dump2", dir_dev);
		remove_proc_entry("mac_reg_dump3", dir_dev);
		remove_proc_entry("bb_reg_dump1", dir_dev);
		remove_proc_entry("bb_reg_dump2", dir_dev);
		remove_proc_entry("bb_reg_dump3", dir_dev);
		remove_proc_entry("rf_reg_dump1", dir_dev);
		remove_proc_entry("rf_reg_dump2", dir_dev);
		rtw_hal_get_hwreg(padapter, HW_VAR_RF_TYPE, (u8 *)(&rf_type));
		if ((RF_1T2R == rf_type) || (RF_1T1R == rf_type)) {
			remove_proc_entry("rf_reg_dump3", dir_dev);
			remove_proc_entry("rf_reg_dump4", dir_dev);
		}
#ifdef CONFIG_88EU_AP_MODE
		remove_proc_entry("all_sta_info", dir_dev);
#endif

		remove_proc_entry("best_channel", dir_dev);
		remove_proc_entry("rx_signal", dir_dev);
		remove_proc_entry("cbw40_enable", dir_dev);
		remove_proc_entry("ht_enable", dir_dev);
		remove_proc_entry("ampdu_enable", dir_dev);
		remove_proc_entry("rx_stbc", dir_dev);
		remove_proc_entry("path_rssi", dir_dev);
		remove_proc_entry("rssi_disp", dir_dev);
		remove_proc_entry(dev->name, rtw_proc);
		dir_dev = NULL;
	} else {
		return;
	}
	rtw_proc_cnt--;

	if (rtw_proc_cnt == 0) {
		if (rtw_proc) {
			remove_proc_entry("ver_info", rtw_proc);

			remove_proc_entry(rtw_proc_name, init_net.proc_net);
			rtw_proc = NULL;
		}
	}
}

开发者ID:383530895，项目名称:linux，代码行数:62，代码来源:os_intfs.c

示例11: rtw_proc_remove_one

void rtw_proc_remove_one(struct net_device *dev)
{
	struct proc_dir_entry *dir_dev = NULL;
	_adapter	*padapter = rtw_netdev_priv(dev);


	dir_dev = padapter->dir_dev;
	padapter->dir_dev = NULL;

	if (dir_dev) {

		remove_proc_entry("write_reg", dir_dev);
		remove_proc_entry("read_reg", dir_dev);
		remove_proc_entry("fwstate", dir_dev);
		remove_proc_entry("sec_info", dir_dev);
		remove_proc_entry("mlmext_state", dir_dev);
		remove_proc_entry("qos_option", dir_dev);
		remove_proc_entry("ht_option", dir_dev);
		remove_proc_entry("rf_info", dir_dev);		
		remove_proc_entry("ap_info", dir_dev);
		remove_proc_entry("adapter_state", dir_dev);
		remove_proc_entry("trx_info", dir_dev);

#ifdef CONFIG_AP_MODE	
		remove_proc_entry("all_sta_info", dir_dev);
#endif		

#ifdef DBG_MEMORY_LEAK
		remove_proc_entry("_malloc_cnt", dir_dev);
#endif 

#ifdef CONFIG_FIND_BEST_CHANNEL
		remove_proc_entry("best_channel", dir_dev);
#endif 
		remove_proc_entry("rx_signal", dir_dev);

		remove_proc_entry("rssi_disp", dir_dev);

		remove_proc_entry(dev->name, rtw_proc);
		dir_dev = NULL;
		
	}
	else
	{
		return;
	}

	rtw_proc_cnt--;

	if(rtw_proc_cnt == 0)
	{
		if(rtw_proc){
			remove_proc_entry("ver_info", rtw_proc);
			
#if(LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24))
			remove_proc_entry(rtw_proc_name, proc_net);
#else
			remove_proc_entry(rtw_proc_name, init_net.proc_net);
#endif		
			rtw_proc = NULL;
		}
	}
}

开发者ID:CoreTech-Development，项目名称:buildroot-linux-kernel-m3，代码行数:63，代码来源:os_intfs.c

示例12: DBG_871X

_adapter *rtw_sdio_if1_init(struct dvobj_priv *dvobj, const struct sdio_device_id  *pdid){
	int status = _FAIL;
	struct net_device *pnetdev;
	PADAPTER padapter = NULL;
	u8 mac_addr[ETH_ALEN];
	u16 fw_ready;
	u32 i;
  
_func_enter_;
	if ((padapter = (_adapter *)rtw_zvmalloc(sizeof(*padapter))) == NULL) {
		DBG_871X("%s: vmalloc for padapter failed!\n", __FUNCTION__);
		goto exit;
	}
	padapter->dvobj = dvobj;
	dvobj->if1 = padapter;
	padapter->interface_type = RTW_SDIO;
	// 1. init network device data
	pnetdev = rtw_init_netdev(padapter);
	if (!pnetdev)
		goto free_adapter;
	SET_NETDEV_DEV(pnetdev, &dvobj->intf_data.func->dev);
	padapter = rtw_netdev_priv(pnetdev);

	// 2. init driver special setting, interface, OS and hardware relative
	rtw_set_hal_ops(padapter);
	
	// 3. initialize Chip version
	padapter->intf_start = &sd_intf_start;
	padapter->intf_stop = &sd_intf_stop;

	padapter->intf_init = &sdio_init;
	padapter->intf_deinit = &sdio_deinit;
	padapter->intf_alloc_irq = &sdio_alloc_irq;
	padapter->intf_free_irq = &sdio_free_irq;
	
	sdio_set_intf_ops(padapter, &padapter->io_ops);

	// 4. init driver common data
	if (rtw_init_drv_sw(padapter) == _FAIL) {
		goto free_adapter;
	}

	// 5. get MAC address
	mac_addr[0] = 0x00;
	mac_addr[1] = 0xe0;
	mac_addr[2] = 0x4c;
	mac_addr[3] = 0xB7;
	mac_addr[4] = 0x23;
	mac_addr[5] = 0x00;
	_rtw_memcpy(pnetdev->dev_addr, mac_addr, ETH_ALEN);
#ifdef CONFIG_FWDL
	// wait for the device boot code ready
	for (i=0;i<100;i++) {
		fw_ready = rtw_read16(padapter, SDIO_REG_HCPWM2);
		if (fw_ready & SDIO_INIT_DONE) {
			break;
		}
		rtw_msleep_os(10);
	}
	if (i==100) {
		DBG_871X("%s: Wait Device Firmware Ready Timeout!!SDIO_REG_HCPWM2 @ 0x%04x\n", __FUNCTION__, fw_ready);
		goto free_adapter;
	}
#else
	// wait for the device firmware ready
	for (i=0;i<100;i++) {
		fw_ready = rtw_read8(padapter, SDIO_REG_CPU_IND);
		if (fw_ready & SDIO_SYSTEM_TRX_RDY_IND) {
			break;
		}
		rtw_msleep_os(10);
	}
	if (i==100) {
		DBG_871X("%s: Wait Device Firmware Ready Timeout!!SDIO_REG_CPU_IND @ 0x%04x\n", __FUNCTION__, fw_ready);
		goto free_adapter;
	}
#endif
	rtw_hal_disable_interrupt(padapter);
	DBG_871X("bDriverStopped:%d, bSurpriseRemoved:%d, bup:%d\n"
		,padapter->bDriverStopped
		,padapter->bSurpriseRemoved
		,padapter->bup
	);
	status = _SUCCESS;
free_adapter:
	if (status != _SUCCESS) {
		if (pnetdev)
			rtw_free_netdev(pnetdev);
		else
			rtw_vmfree((u8*)padapter, sizeof(*padapter));
		padapter = NULL;
	}	
exit:
	_func_exit_;
	return padapter;
}

开发者ID:yangkunming99，项目名称:linux_inic，代码行数:96，代码来源:sdio_intf.c

示例13: proc_get_all_sta_info

int proc_get_all_sta_info(struct seq_file *m, void *v)
{
	struct net_device *dev = m->private;
	_irqL irqL;
	struct sta_info *psta;
	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
	struct sta_priv *pstapriv = &padapter->stapriv;
	int i, j;
	_list	*plist, *phead;
	struct recv_reorder_ctrl *preorder_ctrl;

	DBG_871X_SEL_NL(m, "sta_dz_bitmap=0x%x, tim_bitmap=0x%x\n", pstapriv->sta_dz_bitmap, pstapriv->tim_bitmap);

	_enter_critical_bh(&pstapriv->sta_hash_lock, &irqL);

	for(i=0; i< NUM_STA; i++)
	{
		phead = &(pstapriv->sta_hash[i]);
		plist = get_next(phead);
		
		while ((rtw_end_of_queue_search(phead, plist)) == _FALSE)
		{
			psta = LIST_CONTAINOR(plist, struct sta_info, hash_list);

			plist = get_next(plist);

			//if(extra_arg == psta->aid)
			{
				DBG_871X_SEL_NL(m, "==============================\n");
				DBG_871X_SEL_NL(m, "sta's macaddr:" MAC_FMT "\n", MAC_ARG(psta->hwaddr));
				DBG_871X_SEL_NL(m, "rtsen=%d, cts2slef=%d\n", psta->rtsen, psta->cts2self);
				DBG_871X_SEL_NL(m, "state=0x%x, aid=%d, macid=%d, raid=%d\n", psta->state, psta->aid, psta->mac_id, psta->raid);
#ifdef CONFIG_80211N_HT
				DBG_871X_SEL_NL(m, "qos_en=%d, ht_en=%d, init_rate=%d\n", psta->qos_option, psta->htpriv.ht_option, psta->init_rate);	
				DBG_871X_SEL_NL(m, "bwmode=%d, ch_offset=%d, sgi_20m=%d,sgi_40m=%d\n", psta->bw_mode, psta->htpriv.ch_offset, psta->htpriv.sgi_20m, psta->htpriv.sgi_40m);
				DBG_871X_SEL_NL(m, "ampdu_enable = %d\n", psta->htpriv.ampdu_enable);									
				DBG_871X_SEL_NL(m, "agg_enable_bitmap=%x, candidate_tid_bitmap=%x\n", psta->htpriv.agg_enable_bitmap, psta->htpriv.candidate_tid_bitmap);
#endif //CONFIG_80211N_HT
				DBG_871X_SEL_NL(m, "sleepq_len=%d\n", psta->sleepq_len);
				DBG_871X_SEL_NL(m, "sta_xmitpriv.vo_q_qcnt=%d\n", psta->sta_xmitpriv.vo_q.qcnt);
				DBG_871X_SEL_NL(m, "sta_xmitpriv.vi_q_qcnt=%d\n", psta->sta_xmitpriv.vi_q.qcnt);
				DBG_871X_SEL_NL(m, "sta_xmitpriv.be_q_qcnt=%d\n", psta->sta_xmitpriv.be_q.qcnt);
				DBG_871X_SEL_NL(m, "sta_xmitpriv.bk_q_qcnt=%d\n", psta->sta_xmitpriv.bk_q.qcnt);

				DBG_871X_SEL_NL(m, "capability=0x%x\n", psta->capability);
				DBG_871X_SEL_NL(m, "flags=0x%x\n", psta->flags);
				DBG_871X_SEL_NL(m, "wpa_psk=0x%x\n", psta->wpa_psk);
				DBG_871X_SEL_NL(m, "wpa2_group_cipher=0x%x\n", psta->wpa2_group_cipher);
				DBG_871X_SEL_NL(m, "wpa2_pairwise_cipher=0x%x\n", psta->wpa2_pairwise_cipher);
				DBG_871X_SEL_NL(m, "qos_info=0x%x\n", psta->qos_info);
				DBG_871X_SEL_NL(m, "dot118021XPrivacy=0x%x\n", psta->dot118021XPrivacy);
								
				for(j=0;j<16;j++)
				{							
					preorder_ctrl = &psta->recvreorder_ctrl[j];
					if(preorder_ctrl->enable)
					{
						DBG_871X_SEL_NL(m, "tid=%d, indicate_seq=%d\n", j, preorder_ctrl->indicate_seq);
					}
				}

#ifdef CONFIG_TDLS
				DBG_871X_SEL_NL(m, "tdls_sta_state=0x%08x\n", psta->tdls_sta_state);
				DBG_871X_SEL_NL(m, "PeerKey_Lifetime=%d\n", psta->TDLS_PeerKey_Lifetime);
				DBG_871X_SEL_NL(m, "rx_data_pkts=%llu\n", psta->sta_stats.rx_data_pkts);
				DBG_871X_SEL_NL(m, "rx_bytes=%llu\n", psta->sta_stats.rx_bytes);
				DBG_871X_SEL_NL(m, "tx_data_pkts=%llu\n", psta->sta_stats.tx_pkts);
				DBG_871X_SEL_NL(m, "tx_bytes=%llu\n", psta->sta_stats.tx_bytes);
#endif //CONFIG_TDLS
				DBG_871X_SEL_NL(m, "==============================\n");
			}

		}

	}

	_exit_critical_bh(&pstapriv->sta_hash_lock, &irqL);

	return 0;
}

开发者ID:NotKit，项目名称:android-ia_kernel_intel_baytrail，代码行数:80，代码来源:rtw_debug.c

示例14: rtw_android_priv_cmd

int rtw_android_priv_cmd(struct net_device *net, struct ifreq *ifr, int cmd)
{
	int ret = 0;
	char *command = NULL;
	int cmd_num;
	int bytes_written = 0;
#ifdef CONFIG_PNO_SUPPORT
	uint cmdlen = 0;
	uint pno_enable = 0;
#endif
	android_wifi_priv_cmd priv_cmd;
	_adapter*	padapter = ( _adapter * ) rtw_netdev_priv(net);
#ifdef CONFIG_WFD
	struct wifi_display_info		*pwfd_info;
#endif
	rtw_lock_suspend();

	if (!ifr->ifr_data) {
		ret = -EINVAL;
		goto exit;
	}
	if (copy_from_user(&priv_cmd, ifr->ifr_data, sizeof(android_wifi_priv_cmd))) {
		ret = -EFAULT;
		goto exit;
	}
	if ( padapter->registrypriv.mp_mode == 1) {
		ret = -EFAULT;
		goto exit;
	}
	//DBG_871X("%s priv_cmd.buf=%p priv_cmd.total_len=%d  priv_cmd.used_len=%d\n",__func__,priv_cmd.buf,priv_cmd.total_len,priv_cmd.used_len);
	command = rtw_zmalloc(priv_cmd.total_len);
	if (!command)
	{
		DBG_871X("%s: failed to allocate memory\n", __FUNCTION__);
		ret = -ENOMEM;
		goto exit;
	}

	if (!access_ok(VERIFY_READ, priv_cmd.buf, priv_cmd.total_len)){
	 	DBG_871X("%s: failed to access memory\n", __FUNCTION__);
		ret = -EFAULT;
		goto exit;
	 }
#ifdef CONFIG_COMPAT
	if (copy_from_user(command, compat_ptr(priv_cmd.buf), (unsigned long) priv_cmd.total_len)) {
#else
	if (copy_from_user(command, (void *)priv_cmd.buf, priv_cmd.total_len)) {
#endif
		ret = -EFAULT;
		goto exit;
	}

	DBG_871X("%s: Android private cmd \"%s\" on %s\n"
		, __FUNCTION__, command, ifr->ifr_name);

	cmd_num = rtw_android_cmdstr_to_num(command);
	
	switch(cmd_num) {
	case ANDROID_WIFI_CMD_START:
		//bytes_written = wl_android_wifi_on(net);
		goto response;
	case ANDROID_WIFI_CMD_SETFWPATH:
		goto response;
	}

	if (!g_wifi_on) {
		DBG_871X("%s: Ignore private cmd \"%s\" - iface %s is down\n"
			,__FUNCTION__, command, ifr->ifr_name);
		ret = 0;
		goto exit;
	}

	switch(cmd_num) {

	case ANDROID_WIFI_CMD_STOP:
		//bytes_written = wl_android_wifi_off(net);
		break;
		
	case ANDROID_WIFI_CMD_SCAN_ACTIVE:
		//rtw_set_scan_mode((_adapter *)rtw_netdev_priv(net), SCAN_ACTIVE);
#ifdef CONFIG_PLATFORM_MSTAR
#ifdef CONFIG_IOCTL_CFG80211
		adapter_wdev_data((_adapter *)rtw_netdev_priv(net))->bandroid_scan = _TRUE;
#endif //CONFIG_IOCTL_CFG80211
#endif //CONFIG_PLATFORM_MSTAR
		break;
	case ANDROID_WIFI_CMD_SCAN_PASSIVE:
		//rtw_set_scan_mode((_adapter *)rtw_netdev_priv(net), SCAN_PASSIVE);
		break;
		
	case ANDROID_WIFI_CMD_RSSI:
		bytes_written = rtw_android_get_rssi(net, command, priv_cmd.total_len);
		break;
	case ANDROID_WIFI_CMD_LINKSPEED:
		bytes_written = rtw_android_get_link_speed(net, command, priv_cmd.total_len);
		break;

	case ANDROID_WIFI_CMD_MACADDR:
		bytes_written = rtw_android_get_macaddr(net, command, priv_cmd.total_len);
		break;
//.........这里部分代码省略.........

开发者ID:AustinKwang，项目名称:rtl8192eu，代码行数:101，代码来源:rtw_android.c

示例15: RT_TRACE

struct net_device *rtw_init_netdev(_adapter *old_padapter)	
{
	_adapter *padapter;
	struct net_device *pnetdev;

	RT_TRACE(_module_os_intfs_c_,_drv_info_,("+init_net_dev\n"));

	if(old_padapter != NULL) 
		pnetdev = rtw_alloc_etherdev_with_old_priv(sizeof(_adapter), (void *)old_padapter);
	else 
		pnetdev = rtw_alloc_etherdev(sizeof(_adapter));
	
	if (!pnetdev)
		return NULL;

	padapter = rtw_netdev_priv(pnetdev);
	padapter->pnetdev = pnetdev;	

#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24)
	SET_MODULE_OWNER(pnetdev);
#endif
	
	//pnetdev->init = NULL;
#if (LINUX_VERSION_CODE>=KERNEL_VERSION(2,6,29))

	DBG_8192C("register rtw_netdev_ops to netdev_ops\n");
	pnetdev->netdev_ops = &rtw_netdev_ops;

#else
	pnetdev->open = netdev_open;
	pnetdev->stop = netdev_close;	
	
	pnetdev->hard_start_xmit = rtw_xmit_entry;

	pnetdev->set_mac_address = rtw_net_set_mac_address;
	pnetdev->get_stats = rtw_net_get_stats;

	pnetdev->do_ioctl = rtw_ioctl;

#endif


#ifdef CONFIG_TCP_CSUM_OFFLOAD_TX
	pnetdev->features |= NETIF_F_IP_CSUM;
#endif	
	//pnetdev->tx_timeout = NULL;
	pnetdev->watchdog_timeo = HZ*3; /* 3 second timeout */
	
	pnetdev->wireless_handlers = (struct iw_handler_def *)&rtw_handlers_def;  
	
#ifdef WIRELESS_SPY
	//priv->wireless_data.spy_data = &priv->spy_data;
	//pnetdev->wireless_data = &priv->wireless_data;
#endif

	//step 2.
   	loadparam(padapter, pnetdev);
	
	return pnetdev;

}

开发者ID:hillbeast，项目名称:android_kernel_ainol_novo8，代码行数:61，代码来源:os_intfs.c

示例16: _netdev_open

int _netdev_open(struct net_device *pnetdev)
{
	uint status;
	struct adapter *padapter = (struct adapter *)rtw_netdev_priv(pnetdev);
	struct pwrctrl_priv *pwrctrlpriv = &padapter->pwrctrlpriv;

	RT_TRACE(_module_os_intfs_c_, _drv_info_, ("+88eu_drv - dev_open\n"));
	DBG_88E("+88eu_drv - drv_open, bup =%d\n", padapter->bup);

	if (pwrctrlpriv->ps_flag) {
		padapter->net_closed = false;
		goto netdev_open_normal_process;
	}

	if (!padapter->bup) {
		padapter->bDriverStopped = false;
		padapter->bSurpriseRemoved = false;

		status = rtw_hal_init(padapter);
		if (status == _FAIL) {
			RT_TRACE(_module_os_intfs_c_, _drv_err_, ("rtl88eu_hal_init(): Can't init h/w!\n"));
			goto netdev_open_error;
		}

		pr_info("MAC Address = %pM\n", pnetdev->dev_addr);

		status = rtw_start_drv_threads(padapter);
		if (status == _FAIL) {
			pr_info("Initialize driver software resource Failed!\n");
			goto netdev_open_error;
		}

		if (init_hw_mlme_ext(padapter) == _FAIL) {
			pr_info("can't init mlme_ext_priv\n");
			goto netdev_open_error;
		}
		if (padapter->intf_start)
			padapter->intf_start(padapter);
		rtw_proc_init_one(pnetdev);

		rtw_led_control(padapter, LED_CTL_NO_LINK);

		padapter->bup = true;
	}
	padapter->net_closed = false;

	_set_timer(&padapter->mlmepriv.dynamic_chk_timer, 2000);

	padapter->pwrctrlpriv.bips_processing = false;
	rtw_set_pwr_state_check_timer(&padapter->pwrctrlpriv);

	if (!rtw_netif_queue_stopped(pnetdev))
		netif_tx_start_all_queues(pnetdev);
	else
		netif_tx_wake_all_queues(pnetdev);

netdev_open_normal_process:
	RT_TRACE(_module_os_intfs_c_, _drv_info_, ("-88eu_drv - dev_open\n"));
	DBG_88E("-88eu_drv - drv_open, bup =%d\n", padapter->bup);
	return 0;

netdev_open_error:
	padapter->bup = false;
	netif_carrier_off(pnetdev);
	netif_tx_stop_all_queues(pnetdev);
	RT_TRACE(_module_os_intfs_c_, _drv_err_, ("-88eu_drv - dev_open, fail!\n"));
	DBG_88E("-88eu_drv - drv_open fail, bup =%d\n", padapter->bup);
	return -1;
}

开发者ID:383530895，项目名称:linux，代码行数:69，代码来源:os_intfs.c

示例17: proc_get_btcoex_info

int proc_get_btcoex_info(char *page, char **start,
			  off_t offset, int count, int *eof, void *data)
{
	struct net_device *dev;
	PADAPTER padapter;
	const u32 bufsize = 30*100;
	static u8 *pbuf = NULL;
	static u32 remainlen = 0;
	s32 len;

	dev = (struct net_device*)data;
	padapter = (PADAPTER)rtw_netdev_priv(dev);
	len = 0;

	if (0 == offset) {
		if (bufsize > count) {
			if (NULL == pbuf) {
				pbuf = rtw_zmalloc(bufsize);
				if (NULL == pbuf) {
					return -ENOMEM;
				}
			}
			BT_DisplayBtCoexInfo(padapter, pbuf, bufsize);
			remainlen = strlen(pbuf);

			if (remainlen <= count) {
				_rtw_memcpy(page, pbuf, remainlen);
				len = remainlen;
				remainlen = 0;
			}
		} else {
			_rtw_memset(page, 0, count);
			BT_DisplayBtCoexInfo(padapter, page, count);
			len = strlen(page);
			remainlen = 0;
		}
	}

	if (remainlen && pbuf) {
		*start = page;
		if (remainlen > count)
			len = count;
		else
			len = remainlen;

		_rtw_memcpy(page, pbuf+offset, len);
		remainlen -= len;
	} else {
		remainlen = 0;
		len += offset;
	}

	if (0 == remainlen) {
		if (pbuf) {
			rtw_mfree(pbuf, bufsize);
			DBG_871X("%s,call rtw free mem!\n",__func__);
			pbuf = NULL;
		}
		*eof = 1;
	}

	return len;
}

开发者ID:abgoyal，项目名称:alcatel_ot_4020D_kernel，代码行数:63，代码来源:rtw_debug.c

示例18: _rtw_xmit_entry

int _rtw_xmit_entry(_pkt *pkt, _nic_hdl pnetdev)
{
	_adapter *padapter = (_adapter *)rtw_netdev_priv(pnetdev);
	struct xmit_priv *pxmitpriv = &padapter->xmitpriv;
#ifdef CONFIG_TX_MCAST2UNI
	struct mlme_priv	*pmlmepriv = &padapter->mlmepriv;
	extern int rtw_mc2u_disable;
#endif	// CONFIG_TX_MCAST2UNI
	s32 res = 0;
#if (LINUX_VERSION_CODE>=KERNEL_VERSION(2,6,35))
	u16 queue;
#endif

_func_enter_;

	RT_TRACE(_module_rtl871x_mlme_c_, _drv_info_, ("+xmit_enry\n"));

	if (rtw_if_up(padapter) == _FALSE) {
		RT_TRACE(_module_xmit_osdep_c_, _drv_err_, ("rtw_xmit_entry: rtw_if_up fail\n"));
		#ifdef DBG_TX_DROP_FRAME
		DBG_871X("DBG_TX_DROP_FRAME %s if_up fail\n", __FUNCTION__);
		#endif
		goto drop_packet;
	}

#if (LINUX_VERSION_CODE>=KERNEL_VERSION(2,6,35))
	queue = skb_get_queue_mapping(pkt);
	/* No free space for Tx, tx_worker is too slow */
	if (pxmitpriv->hwxmits[queue].accnt > NR_XMITFRAME/2) {
		//DBG_871X("%s(): stop netif_subqueue[%d]\n", __FUNCTION__, queue);
		netif_stop_subqueue(padapter->pnetdev, queue);
		return NETDEV_TX_BUSY;
	}
#endif

#ifdef CONFIG_TX_MCAST2UNI
	if ( !rtw_mc2u_disable
		&& check_fwstate(pmlmepriv, WIFI_AP_STATE) == _TRUE
		&& ( IP_MCAST_MAC(pkt->data)
			|| ICMPV6_MCAST_MAC(pkt->data) )
		&& (padapter->registrypriv.wifi_spec == 0)
		)
	{
		if ( pxmitpriv->free_xmitframe_cnt > (NR_XMITFRAME/4) ) {
			res = rtw_mlcst2unicst(padapter, pkt);
			if (res == _TRUE) {
				goto exit;
			}
		} else {
			//DBG_871X("Stop M2U(%d, %d)! ", pxmitpriv->free_xmitframe_cnt, pxmitpriv->free_xmitbuf_cnt);
			//DBG_871X("!m2u );
		}
	}
#endif	// CONFIG_TX_MCAST2UNI

	res = rtw_xmit(padapter, &pkt);
	if (res < 0) {
		#ifdef DBG_TX_DROP_FRAME
		DBG_871X("DBG_TX_DROP_FRAME %s rtw_xmit fail\n", __FUNCTION__);
		#endif
		goto drop_packet;
	}

	pxmitpriv->tx_pkts++;
	RT_TRACE(_module_xmit_osdep_c_, _drv_info_, ("rtw_xmit_entry: tx_pkts=%d\n", (u32)pxmitpriv->tx_pkts));
	goto exit;

drop_packet:
	pxmitpriv->tx_drop++;
	rtw_skb_free(pkt);
	RT_TRACE(_module_xmit_osdep_c_, _drv_notice_, ("rtw_xmit_entry: drop, tx_drop=%d\n", (u32)pxmitpriv->tx_drop));

exit:

_func_exit_;

	return 0;
}

开发者ID:1nfused，项目名称:RemoteAccess，代码行数:78，代码来源:xmit_linux.c

示例19: proc_get_all_sta_info

int proc_get_all_sta_info(char *page, char **start,
			  off_t offset, int count,
			  int *eof, void *data)
{
	_irqL irqL;
	struct sta_info *psta;
	struct net_device *dev = data;
	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
	struct sta_priv *pstapriv = &padapter->stapriv;
	int i, j;
	_list	*plist, *phead;
	struct recv_reorder_ctrl *preorder_ctrl;
	int len = 0;


	len += snprintf(page + len, count - len, "sta_dz_bitmap=0x%x, tim_bitmap=0x%x\n", pstapriv->sta_dz_bitmap, pstapriv->tim_bitmap);

	_enter_critical_bh(&pstapriv->sta_hash_lock, &irqL);

	for(i=0; i< NUM_STA; i++)
	{
		phead = &(pstapriv->sta_hash[i]);
		plist = get_next(phead);

		while ((rtw_end_of_queue_search(phead, plist)) == _FALSE)
		{
			psta = LIST_CONTAINOR(plist, struct sta_info, hash_list);

			plist = get_next(plist);

			//if(extra_arg == psta->aid)
			{
				len += snprintf(page + len, count - len, "sta's macaddr:" MAC_FMT "\n", MAC_ARG(psta->hwaddr));
				len += snprintf(page + len, count - len, "rtsen=%d, cts2slef=%d\n", psta->rtsen, psta->cts2self);
				len += snprintf(page + len, count - len, "state=0x%x, aid=%d, macid=%d, raid=%d\n", psta->state, psta->aid, psta->mac_id, psta->raid);
#ifdef CONFIG_80211N_HT
				len += snprintf(page + len, count - len, "qos_en=%d, ht_en=%d, init_rate=%d\n", psta->qos_option, psta->htpriv.ht_option, psta->init_rate);
				len += snprintf(page + len, count - len, "bwmode=%d, ch_offset=%d, sgi=%d\n", psta->htpriv.bwmode, psta->htpriv.ch_offset, psta->htpriv.sgi);
				len += snprintf(page + len, count - len, "ampdu_enable = %d\n", psta->htpriv.ampdu_enable);
				len += snprintf(page + len, count - len, "agg_enable_bitmap=%x, candidate_tid_bitmap=%x\n", psta->htpriv.agg_enable_bitmap, psta->htpriv.candidate_tid_bitmap);
#endif //CONFIG_80211N_HT
				len += snprintf(page + len, count - len, "sleepq_len=%d\n", psta->sleepq_len);
				len += snprintf(page + len, count - len, "capability=0x%x\n", psta->capability);
				len += snprintf(page + len, count - len, "flags=0x%x\n", psta->flags);
				len += snprintf(page + len, count - len, "wpa_psk=0x%x\n", psta->wpa_psk);
				len += snprintf(page + len, count - len, "wpa2_group_cipher=0x%x\n", psta->wpa2_group_cipher);
				len += snprintf(page + len, count - len, "wpa2_pairwise_cipher=0x%x\n", psta->wpa2_pairwise_cipher);
				len += snprintf(page + len, count - len, "qos_info=0x%x\n", psta->qos_info);
				len += snprintf(page + len, count - len, "dot118021XPrivacy=0x%x\n", psta->dot118021XPrivacy);

				for(j=0;j<16;j++)
				{
					preorder_ctrl = &psta->recvreorder_ctrl[j];
					if(preorder_ctrl->enable)
					{
						len += snprintf(page + len, count - len, "tid=%d, indicate_seq=%d\n", j, preorder_ctrl->indicate_seq);
					}
				}

			}

		}

	}

	_exit_critical_bh(&pstapriv->sta_hash_lock, &irqL);

	*eof = 1;
	return len;

}

开发者ID:rtaubes，项目名称:dwa_171，代码行数:71，代码来源:rtw_debug.c

示例20: hostapd_mode_init

int hostapd_mode_init(_adapter *padapter)
{
	unsigned char mac[ETH_ALEN];
	struct hostapd_priv *phostapdpriv;
	struct net_device *pnetdev;
	
	pnetdev = rtw_alloc_etherdev(sizeof(struct hostapd_priv));	
	if (!pnetdev)
	   return -ENOMEM;

	//SET_MODULE_OWNER(pnetdev);
       ether_setup(pnetdev);

	//pnetdev->type = ARPHRD_IEEE80211;
	
	phostapdpriv = rtw_netdev_priv(pnetdev);
	phostapdpriv->pmgnt_netdev = pnetdev;
	phostapdpriv->padapter= padapter;
	padapter->phostapdpriv = phostapdpriv;
	
	//pnetdev->init = NULL;
	
#if (LINUX_VERSION_CODE>=KERNEL_VERSION(2,6,29))

	DBG_871X("register rtl871x_mgnt_netdev_ops to netdev_ops\n");

	pnetdev->netdev_ops = &rtl871x_mgnt_netdev_ops;
	
#else

	pnetdev->open = mgnt_netdev_open;

	pnetdev->stop = mgnt_netdev_close;	
	
	pnetdev->hard_start_xmit = mgnt_xmit_entry;
	
	//pnetdev->set_mac_address = r871x_net_set_mac_address;
	
	//pnetdev->get_stats = r871x_net_get_stats;

	//pnetdev->do_ioctl = r871x_mp_ioctl;
	
#endif

	pnetdev->watchdog_timeo = HZ; /* 1 second timeout */	

	//pnetdev->wireless_handlers = NULL;

#ifdef CONFIG_TCP_CSUM_OFFLOAD_TX
	pnetdev->features |= NETIF_F_IP_CSUM;
#endif	

	
	
	if(dev_alloc_name(pnetdev,"mgnt.wlan%d") < 0)
	{
		DBG_871X("hostapd_mode_init(): dev_alloc_name, fail! \n");		
	}


	//SET_NETDEV_DEV(pnetdev, pintfpriv->udev);


	mac[0]=0x00;
	mac[1]=0xe0;
	mac[2]=0x4c;
	mac[3]=0x87;
	mac[4]=0x11;
	mac[5]=0x12;
				
	_rtw_memcpy(pnetdev->dev_addr, mac, ETH_ALEN);
	

	netif_carrier_off(pnetdev);


	/* Tell the network stack we exist */
	if (register_netdev(pnetdev) != 0)
	{
		DBG_871X("hostapd_mode_init(): register_netdev fail!\n");
		
		if(pnetdev)
      		{	 
			rtw_free_netdev(pnetdev);
      		}
	}
	
	return 0;
	
}

开发者ID:Rumorbox33，项目名称:wm8850，代码行数:90，代码来源:mlme_linux.c

注：本文中的rtw_netdev_priv函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ rtw_read32函数代码示例发布时间：2022-05-30

C++ rtw_msleep_os函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19167|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9982|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8322|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8691|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8635|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9651|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8618|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7995|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8649|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7532|2022-11-06

客服电话

电子邮件

C++ rtw_netdev_priv函数代码示例

示例1: proc_get_rf_reg_dump4

示例2: proc_set_rx_stbc

示例3: proc_get_trx_info

示例4: proc_get_rf_reg_dump1

示例5: proc_get_rx_signal

示例6: rtw_netdev_priv

示例7: proc_set_rx_signal

示例8: proc_set_best_channel

示例9: netdev_br_init

示例10: rtw_proc_remove_one

示例11: rtw_proc_remove_one

示例12: DBG_871X

示例13: proc_get_all_sta_info

示例14: rtw_android_priv_cmd

示例15: RT_TRACE

示例16: _netdev_open

示例17: proc_get_btcoex_info

示例18: _rtw_xmit_entry

示例19: proc_get_all_sta_info

示例20: hostapd_mode_init

请发表评论

全部评论

上一篇：

下一篇：

MATLAB实现闭环传递函数与状态空间之间的相

CVE-2022-35302

krishnaik06/Machine-Learning-in-90-days

willowtreeapps/spruce-android: Spruce An

armancodv/building-energy-model-matlab:

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053