C++ rtl_psc函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中rtl_psc函数的典型用法代码示例。如果您正苦于以下问题：C++ rtl_psc函数的具体用法？C++ rtl_psc怎么用？C++ rtl_psc使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了rtl_psc函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: rtl_ps_enable_nic

bool rtl_ps_enable_nic(struct ieee80211_hw *hw)
{
	struct rtl_priv *rtlpriv = rtl_priv(hw);
	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
	struct rtl_mac *rtlmac = rtl_mac(rtl_priv(hw));

	/*<1> reset trx ring */
	if (rtlhal->interface == INTF_PCI)
		rtlpriv->intf_ops->reset_trx_ring(hw);

	if (is_hal_stop(rtlhal))
		RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
			 "Driver is already down!\n");

	/*<2> Enable Adapter */
	if (rtlpriv->cfg->ops->hw_init(hw))
		return false;
	rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_RETRY_LIMIT,
			&rtlmac->retry_long);
	RT_CLEAR_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_HALT_NIC);

	/*<3> Enable Interrupt */
	rtlpriv->cfg->ops->enable_interrupt(hw);

	/*<enable timer> */
	rtl_watch_dog_timer_callback(&rtlpriv->works.watchdog_timer);

	return true;
}

开发者ID:SantoshShilimkar，项目名称:linux，代码行数:30，代码来源:ps.c

示例2: rtl_lps_leave

/*Leave the leisure power save mode.*/
void rtl_lps_leave(struct ieee80211_hw *hw)
{
	struct rtl_priv *rtlpriv = rtl_priv(hw);
	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));

	mutex_lock(&rtlpriv->locks.ps_mutex);

	if (ppsc->fwctrl_lps) {
		if (ppsc->dot11_psmode != EACTIVE) {

			/*FIX ME */
			rtlpriv->cfg->ops->enable_interrupt(hw);

			if (ppsc->reg_rfps_level & RT_RF_LPS_LEVEL_ASPM &&
			    RT_IN_PS_LEVEL(ppsc, RT_PS_LEVEL_ASPM) &&
			    rtlhal->interface == INTF_PCI) {
				rtlpriv->intf_ops->disable_aspm(hw);
				RT_CLEAR_PS_LEVEL(ppsc, RT_PS_LEVEL_ASPM);
			}

			RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
				 "Busy Traffic,Leave 802.11 power save..\n");

			rtl_lps_set_psmode(hw, EACTIVE);
		}
	}
	mutex_unlock(&rtlpriv->locks.ps_mutex);
}

开发者ID:AICP，项目名称:kernel_moto_shamu，代码行数:30，代码来源:ps.c

示例3: rtl_ps_enable_nic

bool rtl_ps_enable_nic(struct ieee80211_hw *hw)
{
	struct rtl_priv *rtlpriv = rtl_priv(hw);
	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));

	
	if (rtlhal->interface == INTF_PCI)
		rtlpriv->intf_ops->reset_trx_ring(hw);

	if (is_hal_stop(rtlhal))
		RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
			 "Driver is already down!\n");

	
	if (rtlpriv->cfg->ops->hw_init(hw))
		return 1;
	RT_CLEAR_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_HALT_NIC);

	
	rtlpriv->cfg->ops->enable_interrupt(hw);

	
	rtl_watch_dog_timer_callback((unsigned long)hw);

	return true;
}

开发者ID:DirtyDroidX，项目名称:android_kernel_htc_m8ul，代码行数:27，代码来源:ps.c

示例4: rtl_ips_nic_off_wq_callback

void rtl_ips_nic_off_wq_callback(void *data)
{
	struct rtl_works *rtlworks =
	    container_of_dwork_rtl(data, struct rtl_works, ips_nic_off_wq);
	struct ieee80211_hw *hw = rtlworks->hw;
	struct rtl_priv *rtlpriv = rtl_priv(hw);
	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
	enum rf_pwrstate rtstate;

	if (mac->opmode != NL80211_IFTYPE_STATION) {
		RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
			 "not station return\n");
		return;
	}

	if (mac->p2p_in_use)
		return;

	if (mac->link_state > MAC80211_NOLINK)
		return;

	if (is_hal_stop(rtlhal))
		return;

	if (rtlpriv->sec.being_setkey)
		return;

	if (rtlpriv->cfg->ops->bt_coex_off_before_lps)
		rtlpriv->cfg->ops->bt_coex_off_before_lps(hw);

	if (ppsc->inactiveps) {
		rtstate = ppsc->rfpwr_state;

		/*
		 *Do not enter IPS in the following conditions:
		 *(1) RF is already OFF or Sleep
		 *(2) swrf_processing (indicates the IPS is still under going)
		 *(3) Connectted (only disconnected can trigger IPS)
		 *(4) IBSS (send Beacon)
		 *(5) AP mode (send Beacon)
		 *(6) monitor mode (rcv packet)
		 */

		if (rtstate == ERFON &&
		    !ppsc->swrf_processing &&
		    (mac->link_state == MAC80211_NOLINK) &&
		    !mac->act_scanning) {
			RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE,
				 "IPSEnter(): Turn off RF\n");

			ppsc->inactive_pwrstate = ERFOFF;
			ppsc->in_powersavemode = true;

			/*rtl_pci_reset_trx_ring(hw); */
			_rtl_ps_inactive_ps(hw);
		}
	}
}

开发者ID:AICP，项目名称:kernel_moto_shamu，代码行数:60，代码来源:ps.c

示例5: rtl_ips_nic_on

/* NOTICE: any opmode should exc nic_on, or disable without
 * nic_on may something wrong, like adhoc TP
 */
void rtl_ips_nic_on(struct ieee80211_hw *hw)
{
	struct rtl_priv *rtlpriv = rtl_priv(hw);
	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
	enum rf_pwrstate rtstate;
	unsigned long flags;

	if (mac->opmode != NL80211_IFTYPE_STATION)
		return;

	spin_lock_irqsave(&rtlpriv->locks.ips_lock, flags);

	if (ppsc->inactiveps) {
		rtstate = ppsc->rfpwr_state;

		if (rtstate != ERFON &&
		    !ppsc->swrf_processing &&
		    ppsc->rfoff_reason <= RF_CHANGE_BY_IPS) {

			ppsc->inactive_pwrstate = ERFON;
			ppsc->in_powersavemode = false;

			_rtl_ps_inactive_ps(hw);
		}
	}

	spin_unlock_irqrestore(&rtlpriv->locks.ips_lock, flags);
}

开发者ID:AICP，项目名称:kernel_moto_shamu，代码行数:32，代码来源:ps.c

示例6: rtl_op_stop

static void rtl_op_stop( struct ieee80211_hw *hw )
{
	struct rtl_priv *rtlpriv = rtl_priv( hw );
	struct rtl_mac *mac = rtl_mac( rtl_priv( hw ) );
	struct rtl_hal *rtlhal = rtl_hal( rtl_priv( hw ) );
	struct rtl_ps_ctl *ppsc = rtl_psc( rtl_priv( hw ) );

	if ( is_hal_stop( rtlhal ) )
		return;

	/* here is must, because adhoc do stop and start,
	 * but stop with RFOFF may cause something wrong,
	 * like adhoc TP
	 */
	if ( unlikely( ppsc->rfpwr_state == ERFOFF ) ) {
		rtl_ips_nic_on( hw );
	}

	mutex_lock( &rtlpriv->locks.conf_mutex );

	mac->link_state = MAC80211_NOLINK;
	memset( mac->bssid, 0, ETH_ALEN );
	mac->vendor = PEER_UNKNOWN;

	/*reset sec info */
	rtl_cam_reset_sec_info( hw );

	rtl_deinit_deferred_work( hw );
	rtlpriv->intf_ops->adapter_stop( hw );

	mutex_unlock( &rtlpriv->locks.conf_mutex );
}

开发者ID:DavidLin1577TO1874，项目名称:rtl8188ce-linux-driver，代码行数:32，代码来源:core.c

示例7: _rtl_ps_inactive_ps

static void _rtl_ps_inactive_ps(struct ieee80211_hw *hw)
{
	struct rtl_priv *rtlpriv = rtl_priv(hw);
	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));

	ppsc->b_swrf_processing = true;

	if (ppsc->inactive_pwrstate == ERFON && rtlhal->interface == INTF_PCI) {
		if ((ppsc->reg_rfps_level & RT_RF_OFF_LEVL_ASPM) &&
		    RT_IN_PS_LEVEL(ppsc, RT_PS_LEVEL_ASPM) &&
		    rtlhal->interface == INTF_PCI) {
			rtlpriv->intf_ops->disable_aspm(hw);
			RT_CLEAR_PS_LEVEL(ppsc, RT_PS_LEVEL_ASPM);
		}
	}

	stg_rtl_ps_set_rf_state(hw, ppsc->inactive_pwrstate,
				RF_CHANGE_BY_IPS, false);

	if (ppsc->inactive_pwrstate == ERFOFF &&
	    rtlhal->interface == INTF_PCI) {
		if (ppsc->reg_rfps_level & RT_RF_OFF_LEVL_ASPM &&
		    !RT_IN_PS_LEVEL(ppsc, RT_PS_LEVEL_ASPM)) {
			rtlpriv->intf_ops->enable_aspm(hw);
			RT_SET_PS_LEVEL(ppsc, RT_PS_LEVEL_ASPM);
		}
	}

	ppsc->b_swrf_processing = false;
}

开发者ID:AkyZero，项目名称:wrapfs-latest，代码行数:31，代码来源:ps.c

示例8: stg_rtl_ps_enable_nic

bool stg_rtl_ps_enable_nic(struct ieee80211_hw *hw)
{
	struct rtl_priv *rtlpriv = rtl_priv(hw);
	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
	bool init_status = true;

	/*<1> reset trx ring */
	if (rtlhal->interface == INTF_PCI)
		rtlpriv->intf_ops->reset_trx_ring(hw);

	if (is_hal_stop(rtlhal))
		RT_TRACE(COMP_ERR, DBG_WARNING, ("Driver is already down!\n"));

	/*<2> Enable Adapter */
	rtlpriv->cfg->ops->hw_init(hw);
	RT_CLEAR_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_HALT_NIC);
	/*init_status = false; */

	/*<3> Enable Interrupt */
	rtlpriv->cfg->ops->enable_interrupt(hw);

	/*<enable timer> */
	rtl92e_watch_dog_timer_callback((unsigned long)hw);

	return init_status;
}

开发者ID:AkyZero，项目名称:wrapfs-latest，代码行数:27，代码来源:ps.c

示例9: rtl92e_ips_nic_on

/* NOTICE: any opmode should exc nic_on, or disable without
 * nic_on may something wrong, like adhoc TP*/
void rtl92e_ips_nic_on(struct ieee80211_hw *hw)
{
	struct rtl_priv *rtlpriv = rtl_priv(hw);
	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
	enum rf_pwrstate rtstate;

	cancel_delayed_work(&rtlpriv->works.ips_nic_off_wq);

	spin_lock(&rtlpriv->locks.ips_lock);
	if (ppsc->b_inactiveps) {
		rtstate = ppsc->rfpwr_state;

		if (rtstate != ERFON &&
		    !ppsc->b_swrf_processing &&
		    ppsc->rfoff_reason <= RF_CHANGE_BY_IPS) {
			ppsc->inactive_pwrstate = ERFON;
			ppsc->b_in_powersavemode = false;
			_rtl_ps_inactive_ps(hw);
			/* call after RF on */
			if (rtlpriv->cfg->ops->get_btc_status())
				rtlpriv->btcoexist.btc_ops->btc_ips_notify(rtlpriv,
									ppsc->inactive_pwrstate);
		}
	}
	spin_unlock(&rtlpriv->locks.ips_lock);
}

开发者ID:AkyZero，项目名称:wrapfs-latest，代码行数:28，代码来源:ps.c

示例10: rtl_get_fwlps_doze

/*
 *Determine if we can set Fw into PS mode
 *in current condition.Return TRUE if it
 *can enter PS mode.
 */
static bool rtl_get_fwlps_doze(struct ieee80211_hw *hw)
{
	struct rtl_priv *rtlpriv = rtl_priv(hw);
	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
	u32 ps_timediff;

	ps_timediff = jiffies_to_msecs(jiffies -
				       ppsc->last_delaylps_stamp_jiffies);

	if (ps_timediff < 2000) {
		RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
			 ("Delay enter Fw LPS for DHCP, ARP,"
			  " or EAPOL exchanging state.\n"));
		return false;
	}

	if (mac->link_state != MAC80211_LINKED)
		return false;

	if (mac->opmode == NL80211_IFTYPE_ADHOC)
		return false;

	return true;
}

开发者ID:33d，项目名称:linux-2.6.21-hh20，代码行数:30，代码来源:ps.c

示例11: rtl92e_lps_leave

/*Leave the leisure power save mode.*/
void rtl92e_lps_leave(struct ieee80211_hw *hw)
{
	struct rtl_priv *rtlpriv = rtl_priv(hw);
	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
	unsigned long flag;

	spin_lock_irqsave(&rtlpriv->locks.lps_lock, flag);

	if (ppsc->b_fwctrl_lps) {
		if (ppsc->dot11_psmode != EACTIVE) {
			if (ppsc->reg_rfps_level & RT_RF_LPS_LEVEL_ASPM &&
			    RT_IN_PS_LEVEL(ppsc, RT_PS_LEVEL_ASPM) &&
			    rtlhal->interface == INTF_PCI) {
				rtlpriv->intf_ops->disable_aspm(hw);
				RT_CLEAR_PS_LEVEL(ppsc, RT_PS_LEVEL_ASPM);
			}

			RT_TRACE(COMP_POWER, DBG_LOUD,
				 ("Busy Traffic,Leave 802.11 power save..\n"));

			rtl_lps_set_psmode(hw, EACTIVE);
		}
	}
	spin_unlock_irqrestore(&rtlpriv->locks.lps_lock, flag);
}

开发者ID:AkyZero，项目名称:wrapfs-latest，代码行数:27，代码来源:ps.c

示例12: rtl92su_card_disable

void rtl92su_card_disable(struct ieee80211_hw *hw)
{
	struct rtl_priv *rtlpriv = rtl_priv(hw);
	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
	enum nl80211_iftype opmode;
	u8 wait = 30;

	rtlpriv->cfg->ops->led_control(hw, LED_CTL_POWER_OFF);
	RT_SET_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_HALT_NIC);

	/* this is very important for ips power save */
	while (wait-- >= 10 && rtlpriv->psc.pwrdomain_protect) {
		if (rtlpriv->psc.pwrdomain_protect)
			mdelay(20);
		else
			break;
	}

	mac->link_state = MAC80211_NOLINK;
	opmode = NL80211_IFTYPE_UNSPECIFIED;
	rtl92s_set_media_status(hw, opmode);

	rtl92s_phy_set_rfhalt(hw);
	udelay(100);
}

开发者ID:ericdjobs，项目名称:rtl8192su，代码行数:26，代码来源:hw.c

示例13: rtl_op_tx

static void rtl_op_tx(struct ieee80211_hw *hw,
		      struct ieee80211_tx_control *control,
		      struct sk_buff *skb)
{
	struct rtl_priv *rtlpriv = rtl_priv(hw);
	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
	struct rtl_tcb_desc tcb_desc;
	memset(&tcb_desc, 0, sizeof(struct rtl_tcb_desc));

	if (unlikely(is_hal_stop(rtlhal) || ppsc->rfpwr_state != ERFON))
		goto err_free;

	if (!test_bit(RTL_STATUS_INTERFACE_START, &rtlpriv->status))
		goto err_free;

	rtl_tx_accounting(hw, skb);

	if (!rtlpriv->intf_ops->waitq_insert(hw, control->sta, skb))
		rtlpriv->intf_ops->adapter_tx(hw, control->sta, skb, &tcb_desc);

	return;

err_free:
	ieee80211_free_txskb(hw, skb);
}

开发者ID:kyalipay，项目名称:rtl8192su，代码行数:26，代码来源:core.c

示例14: rtl_swlps_rf_sleep

void rtl_swlps_rf_sleep(struct ieee80211_hw *hw)
{
	struct rtl_priv *rtlpriv = rtl_priv(hw);
	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
	u8 sleep_intv;

	if (!rtlpriv->psc.sw_ps_enabled)
		return;

	if ((rtlpriv->sec.being_setkey) ||
	    (mac->opmode == NL80211_IFTYPE_ADHOC))
		return;

	/*sleep after linked 10s, to let DHCP and 4-way handshake ok enough!! */
	if ((mac->link_state != MAC80211_LINKED) || (mac->cnt_after_linked < 5))
		return;

	if (rtlpriv->link_info.busytraffic)
		return;

	mutex_lock(&rtlpriv->locks.ps_mutex);
	rtl_ps_set_rf_state(hw, ERFSLEEP, RF_CHANGE_BY_PS);
	mutex_unlock(&rtlpriv->locks.ps_mutex);

	if (ppsc->reg_rfps_level & RT_RF_OFF_LEVL_ASPM &&
		!RT_IN_PS_LEVEL(ppsc, RT_PS_LEVEL_ASPM)) {
		rtlpriv->intf_ops->enable_aspm(hw);
		RT_SET_PS_LEVEL(ppsc, RT_PS_LEVEL_ASPM);
	}

	/* here is power save alg, when this beacon is DTIM
	 * we will set sleep time to dtim_period * n;
	 * when this beacon is not DTIM, we will set sleep
	 * time to sleep_intv = rtlpriv->psc.dtim_counter or
	 * MAX_SW_LPS_SLEEP_INTV(default set to 5) */

	if (rtlpriv->psc.dtim_counter == 0) {
		if (hw->conf.ps_dtim_period == 1)
			sleep_intv = hw->conf.ps_dtim_period * 2;
		else
			sleep_intv = hw->conf.ps_dtim_period;
	} else {
		sleep_intv = rtlpriv->psc.dtim_counter;
	}

	if (sleep_intv > MAX_SW_LPS_SLEEP_INTV)
		sleep_intv = MAX_SW_LPS_SLEEP_INTV;

	/* this print should always be dtim_conter = 0 &
	 * sleep  = dtim_period, that meaons, we should
	 * awake before every dtim */
	RT_TRACE(rtlpriv, COMP_POWER, DBG_DMESG,
		 "dtim_counter:%x will sleep :%d beacon_intv\n",
		 rtlpriv->psc.dtim_counter, sleep_intv);

	/* we tested that 40ms is enough for sw & hw sw delay */
	queue_delayed_work(rtlpriv->works.rtl_wq, &rtlpriv->works.ps_rfon_wq,
			MSECS(sleep_intv * mac->vif->bss_conf.beacon_int - 40));
}

开发者ID:AICP，项目名称:kernel_moto_shamu，代码行数:60，代码来源:ps.c

示例15: rtl_op_stop

static void rtl_op_stop(struct ieee80211_hw *hw)
{
	struct rtl_priv *rtlpriv = rtl_priv(hw);
	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));

	if (is_hal_stop(rtlhal))
		return;

	if (unlikely(ppsc->rfpwr_state == ERFOFF)) {
		rtl_ips_nic_on(hw);
		mdelay(1);
	}

	mutex_lock(&rtlpriv->locks.conf_mutex);

	mac->link_state = MAC80211_NOLINK;
	memset(mac->bssid, 0, 6);
	mac->vendor = PEER_UNKNOWN;

	/*reset sec info */
	rtl_cam_reset_sec_info(hw);

	rtl_deinit_deferred_work(hw);
	rtlpriv->intf_ops->adapter_stop(hw);

	mutex_unlock(&rtlpriv->locks.conf_mutex);
}

开发者ID:Druboo666，项目名称:Xperia-2011-Kernel-2.6.32.9-KRsH，代码行数:29，代码来源:core.c

示例16: _rtl8723ae_query_rxphystatus

static void _rtl8723ae_query_rxphystatus(struct ieee80211_hw *hw,
			struct rtl_stats *pstatus, u8 *pdesc,
			struct rx_fwinfo_8723e *p_drvinfo,
			bool bpacket_match_bssid,
			bool bpacket_toself, bool packet_beacon)
{
	struct rtl_priv *rtlpriv = rtl_priv(hw);
	struct rtl_ps_ctl *ppsc = rtl_psc(rtlpriv);
	struct phy_sts_cck_8723e_t *cck_buf;
	s8 rx_pwr_all, rx_pwr[4];
	u8 rf_rx_num = 0, evm, pwdb_all;
	u8 i, max_spatial_stream;
	u32 rssi, total_rssi = 0;
	bool is_cck = pstatus->is_cck;

	/* Record it for next packet processing */
	pstatus->packet_matchbssid = bpacket_match_bssid;
	pstatus->packet_toself = bpacket_toself;
	pstatus->packet_beacon = packet_beacon;
	pstatus->rx_mimo_sig_qual[0] = -1;
	pstatus->rx_mimo_sig_qual[1] = -1;

	if (is_cck) {
		u8 report, cck_highpwr;

		/* CCK Driver info Structure is not the same as OFDM packet. */
		cck_buf = (struct phy_sts_cck_8723e_t *)p_drvinfo;

		/* (1)Hardware does not provide RSSI for CCK
		 * (2)PWDB, Average PWDB cacluated by
		 * hardware (for rate adaptive)
		 */
		if (ppsc->rfpwr_state == ERFON)
			cck_highpwr = (u8) rtl_get_bbreg(hw,
						 RFPGA0_XA_HSSIPARAMETER2,
						 BIT(9));
		else
			cck_highpwr = false;

		if (!cck_highpwr) {
			u8 cck_agc_rpt = cck_buf->cck_agc_rpt;
			report = cck_buf->cck_agc_rpt & 0xc0;
			report = report >> 6;
			switch (report) {
			case 0x3:
				rx_pwr_all = -46 - (cck_agc_rpt & 0x3e);
				break;
			case 0x2:
				rx_pwr_all = -26 - (cck_agc_rpt & 0x3e);
				break;
			case 0x1:
				rx_pwr_all = -12 - (cck_agc_rpt & 0x3e);
				break;
			case 0x0:
				rx_pwr_all = 16 - (cck_agc_rpt & 0x3e);
				break;
			}
		} else {

开发者ID:kyalipay，项目名称:rtl8192su，代码行数:58，代码来源:trx.c

示例17: _rtl92ce_query_rxphystatus

static void _rtl92ce_query_rxphystatus(struct ieee80211_hw *hw,
				       struct rtl_stats *pstats,
				       struct rx_desc_92c *pdesc,
				       struct rx_fwinfo_92c *p_drvinfo,
				       bool packet_match_bssid,
				       bool packet_toself,
				       bool packet_beacon)
{
	struct rtl_priv *rtlpriv = rtl_priv(hw);
	struct phy_sts_cck_8192s_t *cck_buf;
	struct rtl_ps_ctl *ppsc = rtl_psc(rtlpriv);
	s8 rx_pwr_all = 0, rx_pwr[4];
	u8 evm, pwdb_all, rf_rx_num = 0;
	u8 i, max_spatial_stream;
	u32 rssi, total_rssi = 0;
	bool is_cck_rate;

	is_cck_rate = RX_HAL_IS_CCK_RATE(pdesc);
	pstats->packet_matchbssid = packet_match_bssid;
	pstats->packet_toself = packet_toself;
	pstats->is_cck = is_cck_rate;
	pstats->packet_beacon = packet_beacon;
	pstats->rx_mimo_sig_qual[0] = -1;
	pstats->rx_mimo_sig_qual[1] = -1;

	if (is_cck_rate) {
		u8 report, cck_highpwr;
		cck_buf = (struct phy_sts_cck_8192s_t *)p_drvinfo;

		if (ppsc->rfpwr_state == ERFON)
			cck_highpwr = (u8) rtl_get_bbreg(hw,
						 RFPGA0_XA_HSSIPARAMETER2,
						 BIT(9));
		else
			cck_highpwr = false;

		if (!cck_highpwr) {
			u8 cck_agc_rpt = cck_buf->cck_agc_rpt;
			report = cck_buf->cck_agc_rpt & 0xc0;
			report = report >> 6;
			switch (report) {
			case 0x3:
				rx_pwr_all = -46 - (cck_agc_rpt & 0x3e);
				break;
			case 0x2:
				rx_pwr_all = -26 - (cck_agc_rpt & 0x3e);
				break;
			case 0x1:
				rx_pwr_all = -12 - (cck_agc_rpt & 0x3e);
				break;
			case 0x0:
				rx_pwr_all = 16 - (cck_agc_rpt & 0x3e);
				break;
			}
		} else {

开发者ID:mikuhatsune001，项目名称:linux2.6.32，代码行数:55，代码来源:trx.c

示例18: rtl92cu_phy_set_rf_power_state

bool rtl92cu_phy_set_rf_power_state( struct ieee80211_hw *hw,
				    enum rf_pwrstate rfpwr_state )
{
	struct rtl_ps_ctl *ppsc = rtl_psc( rtl_priv( hw ) );
	bool bresult = false;

	if ( rfpwr_state == ppsc->rfpwr_state )
		return bresult;
	bresult = _rtl92cu_phy_set_rf_power_state( hw, rfpwr_state );
	return bresult;
}

开发者ID:Meticulus，项目名称:rtl8188ce-linux-driver，代码行数:11，代码来源:phy.c

示例19: rtl_swlps_rf_sleep

void rtl_swlps_rf_sleep(struct ieee80211_hw *hw)
{
	struct rtl_priv *rtlpriv = rtl_priv(hw);
	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
	u8 sleep_intv;

	if (!rtlpriv->psc.sw_ps_enabled)
		return;

	if ((rtlpriv->sec.being_setkey) ||
	    (mac->opmode == NL80211_IFTYPE_ADHOC))
		return;

	
	if ((mac->link_state != MAC80211_LINKED) || (mac->cnt_after_linked < 5))
		return;

	if (rtlpriv->link_info.busytraffic)
		return;

	mutex_lock(&rtlpriv->locks.ps_mutex);
	rtl_ps_set_rf_state(hw, ERFSLEEP, RF_CHANGE_BY_PS);
	mutex_unlock(&rtlpriv->locks.ps_mutex);

	if (ppsc->reg_rfps_level & RT_RF_OFF_LEVL_ASPM &&
		!RT_IN_PS_LEVEL(ppsc, RT_PS_LEVEL_ASPM)) {
		rtlpriv->intf_ops->enable_aspm(hw);
		RT_SET_PS_LEVEL(ppsc, RT_PS_LEVEL_ASPM);
	}


	if (rtlpriv->psc.dtim_counter == 0) {
		if (hw->conf.ps_dtim_period == 1)
			sleep_intv = hw->conf.ps_dtim_period * 2;
		else
			sleep_intv = hw->conf.ps_dtim_period;
	} else {
		sleep_intv = rtlpriv->psc.dtim_counter;
	}

	if (sleep_intv > MAX_SW_LPS_SLEEP_INTV)
		sleep_intv = MAX_SW_LPS_SLEEP_INTV;

	RT_TRACE(rtlpriv, COMP_POWER, DBG_DMESG,
		 "dtim_counter:%x will sleep :%d beacon_intv\n",
		 rtlpriv->psc.dtim_counter, sleep_intv);

	
	queue_delayed_work(rtlpriv->works.rtl_wq, &rtlpriv->works.ps_rfon_wq,
			MSECS(sleep_intv * mac->vif->bss_conf.beacon_int - 40));
}

开发者ID:DirtyDroidX，项目名称:android_kernel_htc_m8ul，代码行数:52，代码来源:ps.c

示例20: rtl_ps_set_rf_state

bool rtl_ps_set_rf_state(struct ieee80211_hw *hw,
			 enum rf_pwrstate state_toset,
			 u32 changesource)
{
	struct rtl_priv *rtlpriv = rtl_priv(hw);
	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
	bool actionallowed = false;

	switch (state_toset) {
	case ERFON:
		ppsc->rfoff_reason &= (~changesource);

		if ((changesource == RF_CHANGE_BY_HW) &&
		    (ppsc->hwradiooff)) {
			ppsc->hwradiooff = false;
		}

		if (!ppsc->rfoff_reason) {
			ppsc->rfoff_reason = 0;
			actionallowed = true;
		}

		break;

	case ERFOFF:

		if ((changesource == RF_CHANGE_BY_HW)
		    && (ppsc->hwradiooff == false)) {
			ppsc->hwradiooff = true;
		}

		ppsc->rfoff_reason |= changesource;
		actionallowed = true;
		break;

	case ERFSLEEP:
		ppsc->rfoff_reason |= changesource;
		actionallowed = true;
		break;

	default:
		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
			 ("switch case not process\n"));
		break;
	}

	if (actionallowed)
		rtlpriv->cfg->ops->set_rf_power_state(hw, state_toset);

	return actionallowed;
}

开发者ID:33d，项目名称:linux-2.6.21-hh20，代码行数:51，代码来源:ps.c

注：本文中的rtl_psc函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ rtl_pcidev函数代码示例发布时间：2022-05-30

C++ rtl_mac函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19168|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9982|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8322|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8691|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8635|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9651|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8618|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7995|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8649|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7532|2022-11-06

客服电话

电子邮件

C++ rtl_psc函数代码示例

示例1: rtl_ps_enable_nic

示例2: rtl_lps_leave

示例3: rtl_ps_enable_nic

示例4: rtl_ips_nic_off_wq_callback

示例5: rtl_ips_nic_on

示例6: rtl_op_stop

示例7: _rtl_ps_inactive_ps

示例8: stg_rtl_ps_enable_nic

示例9: rtl92e_ips_nic_on

示例10: rtl_get_fwlps_doze

示例11: rtl92e_lps_leave

示例12: rtl92su_card_disable

示例13: rtl_op_tx

示例14: rtl_swlps_rf_sleep

示例15: rtl_op_stop

示例16: _rtl8723ae_query_rxphystatus

示例17: _rtl92ce_query_rxphystatus

示例18: rtl92cu_phy_set_rf_power_state

示例19: rtl_swlps_rf_sleep

示例20: rtl_ps_set_rf_state

请发表评论

全部评论

上一篇：

下一篇：

AllenDowney/ThinkDataStructures: LaTeX s

librespeed/speedtest: Self-hosted Speedt

avehtari/BDA_m_demos: Bayesian Data Anal

四维彩超怎么看性别？四维看男孩女孩诀窍

medfreeman/markdown-it-toc-and-anchor: m

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053