C++ rtl_hal函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中rtl_hal函数的典型用法代码示例。如果您正苦于以下问题：C++ rtl_hal函数的具体用法？C++ rtl_hal怎么用？C++ rtl_hal使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了rtl_hal函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: rtl92c_phy_mac_config

bool rtl92c_phy_mac_config(struct ieee80211_hw *hw)
{
	struct rtl_priv *rtlpriv = rtl_priv(hw);
	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
	bool is92c = IS_92C_SERIAL(rtlhal->version);
	bool rtstatus = _rtl92c_phy_config_mac_with_headerfile(hw);

	if (is92c)
		rtl_write_byte(rtlpriv, 0x14, 0x71);
	return rtstatus;
}

开发者ID:0xroot，项目名称:Blackphone-BP1-Kernel，代码行数:11，代码来源:phy.c

示例2: rtl_ips_nic_off_wq_callback

void rtl_ips_nic_off_wq_callback(void *data)
{
	struct rtl_works *rtlworks =
	    container_of_dwork_rtl(data, struct rtl_works, ips_nic_off_wq);
	struct ieee80211_hw *hw = rtlworks->hw;
	struct rtl_priv *rtlpriv = rtl_priv(hw);
	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
	enum rf_pwrstate rtstate;

	if (mac->opmode != NL80211_IFTYPE_STATION) {
		RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
			 ("not station return\n"));
		return;
	}

	if (mac->link_state > MAC80211_NOLINK)
		return;

	if (is_hal_stop(rtlhal))
		return;

	if (rtlpriv->sec.being_setkey)
		return;

	if (ppsc->inactiveps) {
		rtstate = ppsc->rfpwr_state;

		/*
		 *Do not enter IPS in the following conditions:
		 *(1) RF is already OFF or Sleep
		 *(2) swrf_processing (indicates the IPS is still under going)
		 *(3) Connectted (only disconnected can trigger IPS)
		 *(4) IBSS (send Beacon)
		 *(5) AP mode (send Beacon)
		 *(6) monitor mode (rcv packet)
		 */

		if (rtstate == ERFON &&
		    !ppsc->swrf_processing &&
		    (mac->link_state == MAC80211_NOLINK) &&
		    !mac->act_scanning) {
			RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE,
				 ("IPSEnter(): Turn off RF.\n"));

			ppsc->inactive_pwrstate = ERFOFF;
			ppsc->in_powersavemode = true;

			/*rtl_pci_reset_trx_ring(hw); */
			_rtl_ps_inactive_ps(hw);
		}
	}
}

开发者ID:33d，项目名称:linux-2.6.21-hh20，代码行数:54，代码来源:ps.c

示例3: rtl_usb_stop

static void rtl_usb_stop(struct ieee80211_hw *hw)
{
	struct rtl_priv *rtlpriv = rtl_priv(hw);
	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
	struct rtl_usb *rtlusb = rtl_usbdev(rtl_usbpriv(hw));

	
	set_hal_stop(rtlhal);
	
	SET_USB_STOP(rtlusb);
	rtl_usb_deinit(hw);
	rtlpriv->cfg->ops->hw_disable(hw);
}

开发者ID:mjduddin，项目名称:B14CKB1RD_kernel_m8，代码行数:13，代码来源:usb.c

示例4: netdev_close

int netdev_close(struct net_device *ndev)
{
	struct rtl_priv *rtlpriv = rtl_priv(ndev);
	struct rtl_hal *rtlhal = rtl_hal(rtlpriv);	

	if (rtlpriv->pwrctrlpriv.bInternalAutoSuspend == _TRUE) {
		/*rtw_pwr_wakeup(rtlpriv); */
		if (rtlpriv->pwrctrlpriv.rf_pwrstate == rf_off)
			rtlpriv->pwrctrlpriv.ps_flag = _TRUE;
	}
	rtlpriv->net_closed = _TRUE;

/*	if (!rtlpriv->hw_init_completed)
	{
		DBG_871X("(1)871x_drv - drv_close, bup=%d, hw_init_completed=%d\n", rtlpriv->bup, rtlpriv->hw_init_completed);

		rtlpriv->bDriverStopped = _TRUE;

		rtw_dev_unload(rtlpriv);
	}
	else*/
	if (rtlpriv->pwrctrlpriv.rf_pwrstate == rf_on) {
		DBG_871X("(2)871x_drv - drv_close, bup=%d, hw_init_completed=%d\n", rtlpriv->bup, rtlpriv->hw_init_completed);

		/* s1. */
		if (ndev) {
			if (!rtw_netif_queue_stopped(ndev))
				rtw_netif_stop_queue(ndev);
		}

		/* s2. */
		LeaveAllPowerSaveMode(rtlpriv);
		rtw_disassoc_cmd(rtlpriv, 500, _FALSE);
		/* s2-2.  indicate disconnect to os */
		rtw_indicate_disconnect(rtlpriv);
		/* s2-3. */
		rtw_free_assoc_resources(rtlpriv, 1);
		/* s2-4. */
		rtw_free_network_queue(rtlpriv, _TRUE);
		/* Close LED */
		rtw_hal_led_control(rtlpriv, LED_CTL_POWER_OFF);
	}

	kfree(rtlhal->pfirmware);
	rtlhal->pfirmware = NULL;

	DBG_871X("-871x_drv - drv_close, bup=%d\n", rtlpriv->bup);

	return 0;

}

开发者ID:directhex，项目名称:rtl8821au-dkms，代码行数:51，代码来源:os_intfs.c

示例5: _rtl92s_firmware_set_h2c_cmd

static bool _rtl92s_firmware_set_h2c_cmd( struct ieee80211_hw *hw, u8 h2c_cmd,
		u8 *pcmd_buffer )
{
	struct rtl_priv *rtlpriv = rtl_priv( hw );
	struct rtl_hal *rtlhal = rtl_hal( rtl_priv( hw ) );
	struct rtl_tcb_desc *cb_desc;
	struct sk_buff *skb;
	u32	element_id = 0;
	u32	cmd_len = 0;
	u32	len;

	switch ( h2c_cmd ) {
	case FW_H2C_SETPWRMODE:
		element_id = H2C_SETPWRMODE_CMD ;
		cmd_len = sizeof( struct h2c_set_pwrmode_parm );
		break;
	case FW_H2C_JOINBSSRPT:
		element_id = H2C_JOINBSSRPT_CMD;
		cmd_len = sizeof( struct h2c_joinbss_rpt_parm );
		break;
	case FW_H2C_WOWLAN_UPDATE_GTK:
		element_id = H2C_WOWLAN_UPDATE_GTK_CMD;
		cmd_len = sizeof( struct h2c_wpa_two_way_parm );
		break;
	case FW_H2C_WOWLAN_UPDATE_IV:
		element_id = H2C_WOWLAN_UPDATE_IV_CMD;
		cmd_len = sizeof( unsigned long long );
		break;
	case FW_H2C_WOWLAN_OFFLOAD:
		element_id = H2C_WOWLAN_FW_OFFLOAD;
		cmd_len = sizeof( u8 );
		break;
	default:
		break;
	}

	len = _rtl92s_get_h2c_cmdlen( MAX_TRANSMIT_BUFFER_SIZE, 1, &cmd_len );
	skb = dev_alloc_skb( len );
	cb_desc = ( struct rtl_tcb_desc* )( skb->cb );
	cb_desc->queue_index = TXCMD_QUEUE;
	cb_desc->b_cmd_or_init = DESC_PACKET_TYPE_NORMAL;
	cb_desc->b_last_inipkt = false;

	_rtl92s_fill_h2c_cmd( skb, MAX_TRANSMIT_BUFFER_SIZE, 1, &element_id,
			&cmd_len, &pcmd_buffer,	&rtlhal->h2c_txcmd_seq );
	_rtl92s_cmd_send_packet( hw, skb, false );
	rtlpriv->cfg->ops->tx_polling( hw, TXCMD_QUEUE );

	return true;
}

开发者ID:jrosco，项目名称:rtl8188ce-linux-driver，代码行数:50，代码来源:fw.c

示例6: rtl92c_init_beacon_parameters

void rtl92c_init_beacon_parameters(struct ieee80211_hw *hw,
				   enum version_8192c version)
{
	struct rtl_priv *rtlpriv = rtl_priv(hw);
	struct rtl_hal *rtlhal = rtl_hal(rtlpriv);

	rtl_write_word(rtlpriv, REG_TBTT_PROHIBIT, 0x6404);/* ms */
	rtl_write_byte(rtlpriv, REG_DRVERLYINT, DRIVER_EARLY_INT_TIME);/*ms*/
	rtl_write_byte(rtlpriv, REG_BCNDMATIM, BCN_DMA_ATIME_INT_TIME);
	if (IS_NORMAL_CHIP(rtlhal->version))
		rtl_write_word(rtlpriv, REG_BCNTCFG, 0x660F);
	else
		rtl_write_word(rtlpriv, REG_BCNTCFG, 0x66FF);
}

开发者ID:7799，项目名称:linux，代码行数:14，代码来源:mac.c

示例7: rtl8723_download_fw

int rtl8723_download_fw(struct ieee80211_hw *hw,
			bool is_8723be, int max_count)
{
	struct rtl_priv *rtlpriv = rtl_priv(hw);
	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
	struct rtlwifi_firmware_header *pfwheader;
	u8 *pfwdata;
	u32 fwsize;
	int err;
	enum version_8723e version = rtlhal->version;
	int max_page;

	if (!rtlhal->pfirmware)
		return 1;

	pfwheader = (struct rtlwifi_firmware_header *)rtlhal->pfirmware;
	pfwdata = rtlhal->pfirmware;
	fwsize = rtlhal->fwsize;

	if (!is_8723be)
		max_page = 6;
	else
		max_page = 8;
	if (rtlpriv->cfg->ops->is_fw_header(pfwheader)) {
		RT_TRACE(rtlpriv, COMP_FW, DBG_LOUD,
			 "Firmware Version(%d), Signature(%#x), Size(%d)\n",
			 pfwheader->version, pfwheader->signature,
			 (int)sizeof(struct rtlwifi_firmware_header));

		pfwdata = pfwdata + sizeof(struct rtlwifi_firmware_header);
		fwsize = fwsize - sizeof(struct rtlwifi_firmware_header);
	}

	if (rtl_read_byte(rtlpriv, REG_MCUFWDL)&BIT(7)) {
		if (is_8723be)
			rtl8723be_firmware_selfreset(hw);
		else
			rtl8723ae_firmware_selfreset(hw);
		rtl_write_byte(rtlpriv, REG_MCUFWDL, 0x00);
	}
	rtl8723_enable_fw_download(hw, true);
	rtl8723_write_fw(hw, version, pfwdata, fwsize, max_page);
	rtl8723_enable_fw_download(hw, false);

	err = rtl8723_fw_free_to_go(hw, is_8723be, max_count);
	if (err)
		pr_err("Firmware is not ready to run!\n");
	return 0;
}

开发者ID:AshishNamdev，项目名称:linux，代码行数:49，代码来源:fw_common.c

示例8: PHY_GetTxPowerIndexByRateArray_8812A

static void PHY_GetTxPowerIndexByRateArray_8812A(struct rtl_priv *rtlpriv,
        uint8_t RFPath, enum CHANNEL_WIDTH BandWidth,
        uint8_t Channel, uint8_t *Rate, uint8_t *power_index,
        uint8_t	ArraySize)
{
    struct rtl_hal *rtlhal = rtl_hal(rtlpriv);
    struct _rtw_hal *pHalData = GET_HAL_DATA(rtlpriv);
    uint8_t i;
    for (i = 0; i < ArraySize; i++) {
        power_index[i] = _rtl8821au_get_txpower_index(rtlpriv, RFPath, Rate[i], BandWidth, Channel);
        if ((power_index[i] % 2 == 1) &&  !IS_NORMAL_CHIP(rtlhal->version))
            power_index[i] -= 1;
    }

}

开发者ID:ssurba，项目名称:rtl8821au，代码行数:15，代码来源:rtl8812a_phycfg.c

示例9: rtl8821au_fill_h2c_cmd

void rtl8821au_fill_h2c_cmd(struct rtl_priv *rtlpriv, 
					u8 element_id, u32 cmd_len, 
					u8 *cmdbuffer)
{
	struct rtl_hal *rtlhal = rtl_hal(rtlpriv);
	u32 tmp_cmdbuf[2];

	if (rtlhal->fw_ready == false) {
		RT_ASSERT(false,
			  "return H2C cmd because of Fw download fail!!!\n");
		return;
	}

	memset(tmp_cmdbuf, 0, 8);
	memcpy(tmp_cmdbuf, cmdbuffer, cmd_len);
	_rtl8821au_fill_h2c_cmd(rtlpriv, element_id, cmd_len, (u8 *)&tmp_cmdbuf);
}

开发者ID:ssurba，项目名称:rtl8821au，代码行数:17，代码来源:fw.c

示例10: _rtl92cu_phy_config_bb_with_headerfile

bool _rtl92cu_phy_config_bb_with_headerfile( struct ieee80211_hw *hw,
					    u8 configtype )
{
	int i;
	u32 *phy_regarray_table;
	u32 *agctab_array_table;
	u16 phy_reg_arraylen, agctab_arraylen;
	struct rtl_priv *rtlpriv = rtl_priv( hw );
	struct rtl_hal *rtlhal = rtl_hal( rtl_priv( hw ) );
	struct rtl_phy *rtlphy = &( rtlpriv->phy );

	if ( IS_92C_SERIAL( rtlhal->version ) ) {
		agctab_arraylen = rtlphy->hwparam_tables[AGCTAB_2T].length;
		agctab_array_table =  rtlphy->hwparam_tables[AGCTAB_2T].pdata;
		phy_reg_arraylen = rtlphy->hwparam_tables[PHY_REG_2T].length;
		phy_regarray_table = rtlphy->hwparam_tables[PHY_REG_2T].pdata;
	} else {
		agctab_arraylen = rtlphy->hwparam_tables[AGCTAB_1T].length;
		agctab_array_table =  rtlphy->hwparam_tables[AGCTAB_1T].pdata;
		phy_reg_arraylen = rtlphy->hwparam_tables[PHY_REG_1T].length;
		phy_regarray_table = rtlphy->hwparam_tables[PHY_REG_1T].pdata;
	}
	if ( configtype == BASEBAND_CONFIG_PHY_REG ) {
		for ( i = 0; i < phy_reg_arraylen; i = i + 2 ) {
			rtl_addr_delay( phy_regarray_table[i] );
			rtl_set_bbreg( hw, phy_regarray_table[i], MASKDWORD,
				      phy_regarray_table[i + 1] );
			udelay( 1 );
			RT_TRACE( rtlpriv, COMP_INIT, DBG_TRACE,
				 "The phy_regarray_table[0] is %x Rtl819XPHY_REGArray[1] is %x\n",
				 phy_regarray_table[i],
				 phy_regarray_table[i + 1] );
		}
	} else if ( configtype == BASEBAND_CONFIG_AGC_TAB ) {
		for ( i = 0; i < agctab_arraylen; i = i + 2 ) {
			rtl_set_bbreg( hw, agctab_array_table[i], MASKDWORD,
				      agctab_array_table[i + 1] );
			udelay( 1 );
			RT_TRACE( rtlpriv, COMP_INIT, DBG_TRACE,
				 "The agctab_array_table[0] is %x Rtl819XPHY_REGArray[1] is %x\n",
				 agctab_array_table[i],
				 agctab_array_table[i + 1] );
		}
	}
	return true;
}

开发者ID:Meticulus，项目名称:rtl8188ce-linux-driver，代码行数:46，代码来源:phy.c

示例11: rtl_op_start

/*mutex for start & stop is must here. */
static int rtl_op_start(struct ieee80211_hw *hw)
{
	int err;
	struct rtl_priv *rtlpriv = rtl_priv(hw);
	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));

	if (!is_hal_stop(rtlhal))
		return 0;
	if (!test_bit(RTL_STATUS_INTERFACE_START, &rtlpriv->status))
		return 0;
	mutex_lock(&rtlpriv->locks.conf_mutex);
	err = rtlpriv->intf_ops->adapter_start(hw);
	if (!err)
		rtl_watch_dog_timer_callback((unsigned long)hw);
	mutex_unlock(&rtlpriv->locks.conf_mutex);
	return err;
}

开发者ID:Druboo666，项目名称:Xperia-2011-Kernel-2.6.32.9-KRsH，代码行数:18，代码来源:core.c

示例12: rtl_ips_nic_off_wq_callback

void rtl_ips_nic_off_wq_callback(void *data)
{
	struct rtl_works *rtlworks =
	    container_of_dwork_rtl(data, struct rtl_works, ips_nic_off_wq);
	struct ieee80211_hw *hw = rtlworks->hw;
	struct rtl_priv *rtlpriv = rtl_priv(hw);
	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
	enum rf_pwrstate rtstate;

	if (mac->opmode != NL80211_IFTYPE_STATION) {
		RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
			 "not station return\n");
		return;
	}

	if (mac->link_state > MAC80211_NOLINK)
		return;

	if (is_hal_stop(rtlhal))
		return;

	if (rtlpriv->sec.being_setkey)
		return;

	if (ppsc->inactiveps) {
		rtstate = ppsc->rfpwr_state;


		if (rtstate == ERFON &&
		    !ppsc->swrf_processing &&
		    (mac->link_state == MAC80211_NOLINK) &&
		    !mac->act_scanning) {
			RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE,
				 "IPSEnter(): Turn off RF\n");

			ppsc->inactive_pwrstate = ERFOFF;
			ppsc->in_powersavemode = true;

			
			_rtl_ps_inactive_ps(hw);
		}
	}
}

开发者ID:DirtyDroidX，项目名称:android_kernel_htc_m8ul，代码行数:45，代码来源:ps.c

示例13: ODM_ConfigRFWithHeaderFile

void ODM_ConfigRFWithHeaderFile(struct rtl_priv *rtlpriv,
	ODM_RF_Config_Type ConfigType, enum radio_path eRFPath)
{
	struct rtl_hal	*rtlhal = rtl_hal(rtlpriv);

	RT_TRACE(rtlpriv, ODM_COMP_INIT, ODM_DBG_LOUD,
		"===>ODM_ConfigRFWithHeaderFile (%s)\n", (IS_NORMAL_CHIP(rtlhal->version)) ? "MPChip" : "TestChip");
	RT_TRACE(rtlpriv, ODM_COMP_INIT, ODM_DBG_LOUD,
		"pDM_Odm->SupportInterface: 0x%X, pDM_Odm->BoardType: 0x%X\n",
		rtlhal->interface, rtlhal->board_type);

	if (IS_HARDWARE_TYPE_8812AU(rtlhal))
		rtl8812au_phy_config_rf_with_headerfile(rtlpriv, eRFPath);

	if (IS_HARDWARE_TYPE_8821U(rtlhal)) {
		rtl8821au_phy_config_rf_with_headerfile(rtlpriv, RF90_PATH_A);
	}
}

开发者ID:paralin，项目名称:rtl8821au-1，代码行数:18，代码来源:rf.c

示例14: rtl92c_enable_interrupt

void rtl92c_enable_interrupt(struct ieee80211_hw *hw)
{
	struct rtl_priv *rtlpriv = rtl_priv(hw);
	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
	struct rtl_usb *rtlusb = rtl_usbdev(rtl_usbpriv(hw));

	if (IS_HARDWARE_TYPE_8192CE(rtlhal)) {
		rtl_write_dword(rtlpriv, REG_HIMR, rtlpci->irq_mask[0] &
				0xFFFFFFFF);
		rtl_write_dword(rtlpriv, REG_HIMRE, rtlpci->irq_mask[1] &
				0xFFFFFFFF);
	} else {
		rtl_write_dword(rtlpriv, REG_HIMR, rtlusb->irq_mask[0] &
				0xFFFFFFFF);
		rtl_write_dword(rtlpriv, REG_HIMRE, rtlusb->irq_mask[1] &
				0xFFFFFFFF);
	}
}

开发者ID:7799，项目名称:linux，代码行数:19，代码来源:mac.c

示例15: rtl_op_sta_add

static int rtl_op_sta_add(struct ieee80211_hw *hw,
			 struct ieee80211_vif *vif,
			 struct ieee80211_sta *sta)
{
	struct rtl_priv *rtlpriv = rtl_priv(hw);
	struct rtl_hal *rtlhal= rtl_hal(rtl_priv(hw));
	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
	struct rtl_sta_info *sta_entry;

	if (sta) {
		sta_entry = (struct rtl_sta_info *) sta->drv_priv;
		spin_lock_bh(&rtlpriv->locks.entry_list_lock);
		list_add_tail(&sta_entry->list, &rtlpriv->entry_list);
		spin_unlock_bh(&rtlpriv->locks.entry_list_lock);
		if (rtlhal->current_bandtype == BAND_ON_2_4G) {
			sta_entry->wireless_mode = WIRELESS_MODE_G;
			if (sta->supp_rates[0] <= 0xf)
				sta_entry->wireless_mode = WIRELESS_MODE_B;
			if (sta->ht_cap.ht_supported == true)
				sta_entry->wireless_mode = WIRELESS_MODE_N_24G;

			if (vif->type == NL80211_IFTYPE_ADHOC)
				sta_entry->wireless_mode = WIRELESS_MODE_G;
		} else if (rtlhal->current_bandtype == BAND_ON_5G) {
			sta_entry->wireless_mode = WIRELESS_MODE_A;
			if (sta->ht_cap.ht_supported == true)
				sta_entry->wireless_mode = WIRELESS_MODE_N_24G;

			if (vif->type == NL80211_IFTYPE_ADHOC)
				sta_entry->wireless_mode = WIRELESS_MODE_A;
		}
		/*disable cck rate for p2p*/
		if (mac->p2p)
			sta->supp_rates[0] &= 0xfffffff0;

		memcpy(sta_entry->mac_addr, sta->addr, ETH_ALEN);
		RT_TRACE(COMP_MAC80211, DBG_DMESG,
			("Add sta addr is %pM\n",sta->addr));
		rtlpriv->cfg->ops->update_rate_tbl(hw, sta, 0);
	}

	return 0;
}

开发者ID:mikuhatsune001，项目名称:linux2.6.32，代码行数:43，代码来源:core.c

示例16: rtl_usb_tx

static int rtl_usb_tx(struct ieee80211_hw *hw, struct sk_buff *skb,
		      struct rtl_tcb_desc *dummy)
{
	struct rtl_usb *rtlusb = rtl_usbdev(rtl_usbpriv(hw));
	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)(skb->data);
	__le16 fc = hdr->frame_control;
	u16 hw_queue;

	if (unlikely(is_hal_stop(rtlhal)))
		goto err_free;
	hw_queue = rtlusb->usb_mq_to_hwq(fc, skb_get_queue_mapping(skb));
	_rtl_usb_tx_preprocess(hw, skb, hw_queue);
	_rtl_usb_transmit(hw, skb, hw_queue);
	return NETDEV_TX_OK;

err_free:
	dev_kfree_skb_any(skb);
	return NETDEV_TX_OK;
}

开发者ID:38c02aee，项目名称:android_kernel_jiayu_g4，代码行数:20，代码来源:usb.c

示例17: rtl_send_smps_action

int rtl_send_smps_action(struct ieee80211_hw *hw,
		struct ieee80211_sta *sta, u8 *da, u8 *bssid,
		enum ieee80211_smps_mode smps)
{
	struct rtl_priv *rtlpriv = rtl_priv(hw);
	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
	struct sk_buff *skb = rtl_make_smps_action(hw, smps, da, bssid);
	struct rtl_tcb_desc tcb_desc;
	memset(&tcb_desc, 0, sizeof(struct rtl_tcb_desc));

	if (rtlpriv->mac80211.act_scanning)
		goto err_free;

	if (!sta)
		goto err_free;

	if (unlikely(is_hal_stop(rtlhal) || ppsc->rfpwr_state != ERFON))
		goto err_free;

	if (!test_bit(RTL_STATUS_INTERFACE_START, &rtlpriv->status))
		goto err_free;

	/* this is a type = mgmt * stype = action frame */
	if (skb) {
		struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
		struct rtl_sta_info *sta_entry =
			(struct rtl_sta_info *) sta->drv_priv;
		sta_entry->mimo_ps = smps;
		rtlpriv->cfg->ops->update_rate_tbl(hw, sta, 0);

		info->control.rates[0].idx = 0;
		info->control.sta = sta;
		info->band = hw->conf.channel->band;
		rtlpriv->intf_ops->adapter_tx(hw, skb, &tcb_desc);
	}
err_free:
	return 0;
}

开发者ID:5ha5hank，项目名称:tera-compat-wireless，代码行数:39，代码来源:base.c

示例18: rtl_op_tx

static void rtl_op_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
{
	struct rtl_priv *rtlpriv = rtl_priv(hw);
	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
	struct rtl_tcb_desc tcb_desc;
	memset(&tcb_desc, 0, sizeof(struct rtl_tcb_desc));

	if (unlikely(is_hal_stop(rtlhal) || ppsc->rfpwr_state != ERFON))
		goto err_free;

	if (!test_bit(RTL_STATUS_INTERFACE_START, &rtlpriv->status))
		goto err_free;

	if (!rtlpriv->intf_ops->waitq_insert(hw, skb))
		rtlpriv->intf_ops->adapter_tx(hw, skb, &tcb_desc);

	return;

err_free:
	dev_kfree_skb_any(skb);
}

开发者ID:Druboo666，项目名称:Xperia-2011-Kernel-2.6.32.9-KRsH，代码行数:22，代码来源:core.c

示例19: _rtl92s_firmware_set_h2c_cmd

static int _rtl92s_firmware_set_h2c_cmd(struct ieee80211_hw *hw, u32 h2c_cmd,
					 u32 cmd_len, u8 *pcmd_buffer)
{
	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
	struct rtl_tcb_desc *cb_desc;
	struct sk_buff *skb;
	u32 len;

	len = _rtl92s_get_h2c_cmdlen(MAX_TRANSMIT_BUFFER_SIZE, 1, &cmd_len);
	skb = dev_alloc_skb(len);
	if (!skb)
		return -ENOMEM;

	cb_desc = (struct rtl_tcb_desc *)(skb->cb);
	cb_desc->queue_index = TXCMD_QUEUE;
	cb_desc->cmd_or_init = DESC_PACKET_TYPE_NORMAL;
	cb_desc->last_inipkt = false;

	_rtl92s_fill_h2c_cmd(skb, MAX_TRANSMIT_BUFFER_SIZE, 1, &h2c_cmd,
			&cmd_len, &pcmd_buffer,	&rtlhal->h2c_txcmd_seq);
	return _rtl92s_cmd_send_packet(hw, skb, false);
}

开发者ID:kyalipay，项目名称:rtl8192su，代码行数:22，代码来源:fw.c

示例20: rtl_op_tx

/*<delete in kernel end>*/
static void rtl_op_tx(struct ieee80211_hw *hw,
		      struct ieee80211_tx_control *control,
		      struct sk_buff *skb)
/*<delete in kernel start>*/
#endif
/*<delete in kernel end>*/
{
	struct rtl_priv *rtlpriv = rtl_priv(hw);
	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
	struct rtl_tcb_desc tcb_desc;
	memset(&tcb_desc, 0, sizeof(struct rtl_tcb_desc));

	if (unlikely(is_hal_stop(rtlhal) || ppsc->rfpwr_state != ERFON))
		goto err_free;

	if (!test_bit(RTL_STATUS_INTERFACE_START, &rtlpriv->status))
		goto err_free;

/*<delete in kernel start>*/
#if (LINUX_VERSION_CODE < KERNEL_VERSION(3,7,0))
	if (!rtlpriv->intf_ops->waitq_insert(hw, skb))
		rtlpriv->intf_ops->adapter_tx(hw, skb, &tcb_desc);
#else
/*<delete in kernel end>*/
	if (!rtlpriv->intf_ops->waitq_insert(hw, control->sta, skb))
	        rtlpriv->intf_ops->adapter_tx(hw, control->sta, skb, &tcb_desc);
/*<delete in kernel start>*/
#endif
/*<delete in kernel end>*/
	return;

err_free:
	dev_kfree_skb_any(skb);
	return;
}

开发者ID:a7mad19966，项目名称:rtl8723be，代码行数:37，代码来源:core.c

注：本文中的rtl_hal函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ rtl_mac函数代码示例发布时间：2022-05-30

C++ rtl_efuse函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19170|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9982|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8322|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8691|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8635|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9651|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8618|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7995|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8649|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7532|2022-11-06

客服电话

电子邮件

C++ rtl_hal函数代码示例

示例1: rtl92c_phy_mac_config

示例2: rtl_ips_nic_off_wq_callback

示例3: rtl_usb_stop

示例4: netdev_close

示例5: _rtl92s_firmware_set_h2c_cmd

示例6: rtl92c_init_beacon_parameters

示例7: rtl8723_download_fw

示例8: PHY_GetTxPowerIndexByRateArray_8812A

示例9: rtl8821au_fill_h2c_cmd

示例10: _rtl92cu_phy_config_bb_with_headerfile

示例11: rtl_op_start

示例12: rtl_ips_nic_off_wq_callback

示例13: ODM_ConfigRFWithHeaderFile

示例14: rtl92c_enable_interrupt

示例15: rtl_op_sta_add

示例16: rtl_usb_tx

示例17: rtl_send_smps_action

示例18: rtl_op_tx

示例19: _rtl92s_firmware_set_h2c_cmd

示例20: rtl_op_tx

请发表评论

全部评论

上一篇：

下一篇：

AllenDowney/ThinkDataStructures: LaTeX s

librespeed/speedtest: Self-hosted Speedt

avehtari/BDA_m_demos: Bayesian Data Anal

四维彩超怎么看性别？四维看男孩女孩诀窍

medfreeman/markdown-it-toc-and-anchor: m

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053