• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号
登陆 注册

C++ rpm_regulator_smd_driver_init函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中rpm_regulator_smd_driver_init函数的典型用法代码示例。如果您正苦于以下问题：C++ rpm_regulator_smd_driver_init函数的具体用法？C++ rpm_regulator_smd_driver_init怎么用？C++ rpm_regulator_smd_driver_init使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了rpm_regulator_smd_driver_init函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: msm8974_add_drivers

void __init msm8974_add_drivers(void)
{
	msm_init_modem_notifier_list();
	msm_smd_init();
	msm_rpm_driver_init();
	msm_lpmrs_module_init();
	rpm_regulator_smd_driver_init();
	msm_spm_device_init();
	krait_power_init();
	if (of_board_is_rumi())
		msm_clock_init(&msm8974_rumi_clock_init_data);
	else
		msm_clock_init(&msm8974_clock_init_data);
	tsens_tm_init_driver();
	msm_thermal_device_init();
#ifdef CONFIG_LGE_LCD_TUNING
	lge_add_lcd_misc_devices();
#endif
	lge_add_persistent_device();
#ifdef CONFIG_LGE_QFPROM_INTERFACE
	lge_add_qfprom_devices();
#endif
#ifdef CONFIG_LGE_ECO_MODE
	lge_add_lge_kernel_devices();
#endif
/*                                                                    */
#if defined (CONFIG_BCMDHD)
	init_bcm_wifi();
#endif
/*                                                                    */
}
开发者ID:bigctw622，项目名称:LG_G2-D802_StockMOD_Kernel，代码行数:31，代码来源:board-8974-g2-evb.c


示例2: msm8974_add_drivers

void __init msm8974_add_drivers(void)
{
	msm_smem_init();
	msm_init_modem_notifier_list();
	msm_smd_init();
	msm_rpm_driver_init();
	msm_pm_sleep_status_init();
	rpm_regulator_smd_driver_init();
	msm_spm_device_init();
	krait_power_init();
	if (of_board_is_rumi())
		msm_clock_init(&msm8974_rumi_clock_init_data);
	else
		msm_clock_init(&msm8974_clock_init_data);
	tsens_tm_init_driver();
	msm_thermal_device_init();
#ifdef CONFIG_LGE_LCD_TUNING
	lge_add_lcd_misc_devices();
#endif
	lge_add_persistent_device();
#ifdef CONFIG_LGE_QFPROM_INTERFACE
	lge_add_qfprom_devices();
#endif
#ifdef CONFIG_LGE_ECO_MODE
	lge_add_lge_kernel_devices();
#endif
#ifdef CONFIG_LGE_DIAG_USB_ACCESS_LOCK
	lge_add_diag_devices();

#ifdef CONFIG_USB_G_LGE_ANDROID
	lge_add_android_usb_devices();
#endif
}
开发者ID:xenius9，项目名称:d838_kernel，代码行数:33，代码来源:board-8974-g2-au.c


示例3: htc_8226_add_drivers

void __init htc_8226_add_drivers(void)
{
	msm_smem_init();
	msm_init_modem_notifier_list();
	msm_smd_init();
	msm_rpm_driver_init();
	msm_spm_device_init();
	msm_pm_sleep_status_init();
	rpm_regulator_smd_driver_init();
	qpnp_regulator_init();
	if (of_board_is_rumi())
		msm_clock_init(&msm8226_rumi_clock_init_data);
	else
		msm_clock_init(&msm8226_clock_init_data);
	tsens_tm_init_driver();
	msm_thermal_device_init();
	msm8x26_cable_detect_register();
#if defined(CONFIG_HTC_BATT_8960)
	htc_batt_cell_register();
	msm8x26_add_batt_devices();
#endif 
	msm8226_add_usb_devices();
#if defined(CONFIG_HTC_PANEL_PWR_REG)
	htc_8226_dsi_panel_power_register();
#endif
#ifdef CONFIG_HTC_POWER_DEBUG
	htc_8226_cpu_usage_register();
#endif
}
开发者ID:wpandroidios，项目名称:android_kernel_htc_b2wlj_LP50_Sense7，代码行数:29，代码来源:board-htc-8x26.c


示例4: msm8226_add_drivers

/*
 * Used to satisfy dependencies for devices that need to be
 * run early or in a particular order. Most likely your device doesn't fall
 * into this category, and thus the driver should not be added here. The
 * EPROBE_DEFER can satisfy most dependency problems.
 */
void __init msm8226_add_drivers(void)
{
	msm_smem_init();
	msm_init_modem_notifier_list();
	msm_smd_init();
	msm_rpm_driver_init();
	msm_spm_device_init();
	msm_pm_sleep_status_init();
	rpm_regulator_smd_driver_init();
	qpnp_regulator_init();
	spm_regulator_init();
	if (of_board_is_rumi())
		msm_clock_init(&msm8226_rumi_clock_init_data);
	else
		msm_clock_init(&msm8226_clock_init_data);
	msm_bus_fabric_init_driver();
	qup_i2c_init_driver();
	ncp6335d_regulator_init();
	fan53555_regulator_init();
	cpr_regulator_init();
	tsens_tm_init_driver();
	msm_thermal_device_init();
#ifdef CONFIG_ANDROID_RAM_CONSOLE
	ram_console_debug_init();
#endif
#ifdef CONFIG_LCD_KCAL
	add_lcd_kcal_devices();
#endif
}
开发者ID:alexforsale，项目名称:android_kernel_xiaomi_armani，代码行数:35，代码来源:board-8226.c


示例5: htc_8974_add_drivers

void __init htc_8974_add_drivers(void)
{
	msm_smem_init();
	msm_init_modem_notifier_list();
	msm_smd_init();
	msm_rpm_driver_init();
	msm_pm_sleep_status_init();
	rpm_regulator_smd_driver_init();
	msm_spm_device_init();
	krait_power_init();
	msm_clock_init(&msm8974_clock_init_data);
	tsens_tm_init_driver();
	msm_thermal_device_init();
#if defined(CONFIG_HTC_BATT_8960)
	htc_batt_cell_register();
	msm8974_add_batt_devices();
#endif 
	htc_8974_cable_detect_register();
	htc_8974_add_usb_devices();
	htc_8974_dsi_panel_power_register();
#if defined(CONFIG_FB_MSM_MDSS_HDMI_MHL_SII9234) && defined(CONFIG_HTC_MHL_DETECTION)
	htc_8974_mhl_ctrl_register();
#endif
#ifdef CONFIG_HTC_POWER_DEBUG
	htc_cpu_usage_register();
#endif
#ifdef CONFIG_LCD_KCAL
	add_lcd_kcal_devices();
#endif
}
开发者ID:MiniBlu，项目名称:cm11_kernel_htc_msm8974a3ul，代码行数:30，代码来源:board-htc-8974.c


示例6: msm8226_add_drivers

/*
 * Used to satisfy dependencies for devices that need to be
 * run early or in a particular order. Most likely your device doesn't fall
 * into this category, and thus the driver should not be added here. The
 * EPROBE_DEFER can satisfy most dependency problems.
 */
void __init msm8226_add_drivers(void)
{
    msm_smem_init();
    msm_init_modem_notifier_list();
    msm_smd_init();
    msm_rpm_driver_init();
    msm_spm_device_init();
    msm_pm_sleep_status_init();
    rpm_regulator_smd_driver_init();
    qpnp_regulator_init();
    if (of_board_is_rumi())
        msm_clock_init(&msm8226_rumi_clock_init_data);
    else
        msm_clock_init(&msm8226_clock_init_data);
    tsens_tm_init_driver();
#if defined(CONFIG_SEC_MILLET_PROJECT) || defined(CONFIG_SEC_MATISSE_PROJECT) || defined(CONFIG_MACH_S3VE3G_EUR)  || defined (CONFIG_MACH_VICTOR3GDSDTV_LTN)  || \
    defined(CONFIG_SEC_AFYON_PROJECT) || defined(CONFIG_SEC_VICTOR_PROJECT) || defined(CONFIG_SEC_BERLUTI_PROJECT) || \
    defined(CONFIG_SEC_HESTIA_PROJECT) || defined(CONFIG_SEC_GNOTE_PROJECT) || defined(CONFIG_SEC_ATLANTIC_PROJECT) || \
	defined(CONFIG_SEC_DEGAS_PROJECT) || defined(CONFIG_SEC_T10_PROJECT) || defined(CONFIG_SEC_T8_PROJECT) || defined(CONFIG_SEC_MEGA2_PROJECT) || \
	defined(CONFIG_SEC_MS01_PROJECT)
#ifdef CONFIG_SEC_THERMISTOR
    platform_device_register(&sec_device_thermistor);
#endif
#endif
    msm_thermal_device_init();
}
开发者ID:rutvik95，项目名称:android_kernel_samsung_ms013g，代码行数:32，代码来源:board-8226.c


示例7: msm8974_add_drivers

void __init msm8974_add_drivers(void)
{
	msm_smem_init();
	msm_init_modem_notifier_list();
	msm_smd_init();
	msm_rpm_driver_init();
	msm_pm_sleep_status_init();
	rpm_regulator_smd_driver_init();
	msm_spm_device_init();
	krait_power_init();
	if (of_board_is_rumi())
		msm_clock_init(&msm8974_rumi_clock_init_data);
	else
		msm_clock_init(&msm8974_clock_init_data);
	tsens_tm_init_driver();
	msm_thermal_device_init();
	lge_add_persistent_device();
#ifdef CONFIG_LGE_QFPROM_INTERFACE
	lge_add_qfprom_devices();
#endif
#ifdef CONFIG_LGE_DIAG_USB_ACCESS_LOCK
	lge_add_diag_devices();
#endif
/*                                                                       */
#if defined (CONFIG_BCMDHD) || defined (CONFIG_BCMDHD_MODULE)
	init_bcm_wifi();
#endif
/*                                                                       */
#ifdef CONFIG_USB_G_LGE_ANDROID
	lge_add_android_usb_devices();
#endif

}
开发者ID:dorimanx，项目名称:G2-L-KERNEL，代码行数:33，代码来源:board-8974-dzny-dcm.c


示例8: msm8610_add_drivers

void __init msm8610_add_drivers(void)
{
	msm_smem_init();
	msm_init_modem_notifier_list();
	msm_smd_init();
	msm_rpm_driver_init();
	msm_spm_device_init();
	msm_pm_sleep_status_init();
	rpm_regulator_smd_driver_init();
	qpnp_regulator_init();
	tsens_tm_init_driver();
/* LGE do not use msm_thermal. LGE use thermal-engine only */

	msm_thermal_device_init();

	if (of_board_is_rumi())
		msm_clock_init(&msm8610_rumi_clock_init_data);
	else
		msm_clock_init(&msm8610_clock_init_data);
#if defined(CONFIG_ANDROID_RAM_CONSOLE)
	lge_add_persistent_device();
#endif
#ifdef CONFIG_USB_G_LGE_ANDROID
    lge_android_usb_init();
#endif

#ifdef CONFIG_LGE_QFPROM_INTERFACE
	lge_add_qfprom_devices();
#endif
#ifdef CONFIG_LGE_ENABLE_MMC_STRENGTH_CONTROL
    lge_add_mmc_strength_devices();
#endif
}
开发者ID:DroidHost，项目名称:android_kernel_LGE_x5，代码行数:33，代码来源:board-8610-w6ds-tim-br.c


示例9: msm8226_add_drivers

/*
 * Used to satisfy dependencies for devices that need to be
 * run early or in a particular order. Most likely your device doesn't fall
 * into this category, and thus the driver should not be added here. The
 * EPROBE_DEFER can satisfy most dependency problems.
 */
void __init msm8226_add_drivers(void)
{
	msm_smem_init();
	msm_init_modem_notifier_list();
	msm_smd_init();
	msm_rpm_driver_init();
	msm_spm_device_init();
	msm_pm_sleep_status_init();
	rpm_regulator_smd_driver_init();
	qpnp_regulator_init();
	spm_regulator_init();
	if (of_board_is_rumi())
		msm_clock_init(&msm8226_rumi_clock_init_data);
	else
		msm_clock_init(&msm8226_clock_init_data);
	msm_bus_fabric_init_driver();
	qup_i2c_init_driver();
	ncp6335d_regulator_init();
	fan53555_regulator_init();
	cpr_regulator_init();
	tsens_tm_init_driver();

#ifdef CONFIG_SEC_THERMISTOR
	platform_device_register(&sec_device_thermistor);
#endif
	msm_thermal_device_init();
}
开发者ID:GalaxyTab4，项目名称:android_kernel_samsung_matisse，代码行数:33，代码来源:board-8226.c


示例10: htc_8974_add_drivers

/*
 * Used to satisfy dependencies for devices that need to be
 * run early or in a particular order. Most likely your device doesn't fall
 * into this category, and thus the driver should not be added here. The
 * EPROBE_DEFER can satisfy most dependency problems.
 */
void __init htc_8974_add_drivers(void)
{
	msm_smem_init();
	msm_init_modem_notifier_list();
	msm_smd_init();
	msm_rpm_driver_init();
	msm_pm_sleep_status_init();
	rpm_regulator_smd_driver_init();
	msm_spm_device_init();
	krait_power_init();
	msm_clock_init(&msm8974_clock_init_data);
	tsens_tm_init_driver();
	msm_thermal_device_init();
#if defined(CONFIG_HTC_BATT_8960)
	htc_batt_cell_register();
	msm8974_add_batt_devices();
#endif /* CONFIG_HTC_BATT_8960 */
#if (defined(CONFIG_MACH_GLU_U) || defined(CONFIG_MACH_GLU_WLJ))
	syn_init_vkeys_8974();
#endif
	htc_8974_cable_detect_register();
	/* not load usb driver in mfgkernel:diag58 and gift mode */
	if (board_mfg_mode() != 6 && board_mfg_mode() != 7)
		htc_8974_add_usb_devices();
	else
		pr_info("[USB] %s: Don't load USB since board_mfg_mode=%d\n", __func__, board_mfg_mode());

	htc_8974_dsi_panel_power_register();
#if defined(CONFIG_FB_MSM_MDSS_HDMI_MHL_SII9234) && defined(CONFIG_HTC_MHL_DETECTION)
	htc_8974_mhl_ctrl_register();
#endif
#ifdef CONFIG_HTC_POWER_DEBUG
	htc_cpu_usage_register();
#endif
}
开发者ID:Colonel-Corn，项目名称:Kernel_MM_GPE_M8，代码行数:41，代码来源:board-htc-8974.c


示例11: msmkrypton_add_drivers

/*
 * Used to satisfy dependencies for devices that need to be
 * run early or in a particular order. Most likely your device doesn't fall
 * into this category, and thus the driver should not be added here. The
 * EPROBE_DEFER can satisfy most dependency problems.
 */
void __init msmkrypton_add_drivers(void)
{
	msm_smd_init();
	msm_rpm_driver_init();
	rpm_regulator_smd_driver_init();
	msm_spm_device_init();
	msm_clock_init(&msmkrypton_clock_init_data);
	tsens_tm_init_driver();
	msm_thermal_device_init();
}
开发者ID:AD5GB，项目名称:wicked_kernel_lge_hammerhead，代码行数:16，代码来源:board-krypton.c


示例12: apq8084_add_drivers

void __init apq8084_add_drivers(void)
{
	msm_smem_init();
	msm_init_modem_notifier_list();
	msm_smd_init();
	msm_rpm_driver_init();
	rpm_regulator_smd_driver_init();
	msm_spm_device_init();
	msm_clock_init(&msm8084_clock_init_data);
	tsens_tm_init_driver();
}
开发者ID:Blackburn29，项目名称:PsycoKernel，代码行数:11，代码来源:board-8084.c


示例13: msm9625_add_drivers

/*
 * Used to satisfy dependencies for devices that need to be
 * run early or in a particular order. Most likely your device doesn't fall
 * into this category, and thus the driver should not be added here.
 * EPROBE_DEFER can satisfy most dependency problems.
 */
void __init msm9625_add_drivers(void)
{
	msm_init_modem_notifier_list();
	msm_smd_init();
	msm_rpm_driver_init();
	msm_lpmrs_module_init();
	rpm_regulator_smd_driver_init();
	msm_spm_device_init();
	msm_clock_init(&msm9625_clock_init_data);
	msm9625_init_buses();
	tsens_tm_init_driver();
}
开发者ID:caplio，项目名称:android_kernel_samsung_hltedcm，代码行数:18，代码来源:board-9625.c


示例14: msm8974_add_drivers

void __init msm8974_add_drivers(void)
{
	msm_smem_init();
	msm_init_modem_notifier_list();
	msm_smd_init();
	msm_rpm_driver_init();
	msm_pm_sleep_status_init();
	rpm_regulator_smd_driver_init();
	msm_spm_device_init();
	krait_power_init();
	if (of_board_is_rumi())
		msm_clock_init(&msm8974_rumi_clock_init_data);
	else
		msm_clock_init(&msm8974_clock_init_data);
	tsens_tm_init_driver();
#ifdef CONFIG_BRICKED_THERMAL
	msm_thermal_init(&msm_thermal_pdata);
#else
	msm_thermal_device_init();
#endif

#ifdef CONFIG_LGE_LCD_TUNING
	lge_add_lcd_misc_devices();
#endif
	lge_add_persistent_device();
#ifdef CONFIG_LGE_QFPROM_INTERFACE
	lge_add_qfprom_devices();
#endif
#ifdef CONFIG_LGE_ECO_MODE
	lge_add_lge_kernel_devices();
#endif
#ifdef CONFIG_LGE_DIAG_ENABLE_SYSFS
	lge_add_diag_devices();
#endif
#ifdef CONFIG_MACH_MSM8974_G2_VZW
	lge_add_android_usb_devices();
#endif
/* LGE_CHANGE_S, [WiFi][[email protected]], 2013-01-22, Wifi Bring Up */
#if defined(CONFIG_BCMDHD) || defined(CONFIG_BCMDHD_MODULE)
	init_bcm_wifi();
#endif
/* LGE_CHANGE_E, [WiFi][[email protected]], 2013-01-22, Wifi Bring Up */
#if defined(CONFIG_LCD_KCAL)
/* LGE_CHANGE_S
* change code for LCD KCAL
* 2013-05-08, [email protected]
*/
	lge_add_lcd_kcal_devices();
#endif /* CONFIG_LCD_KCAL */
}
开发者ID:SerenityS，项目名称:msm8974_G2_render_kernel，代码行数:50，代码来源:board-8974-g2-us.c


示例15: msm_8974_add_drivers

/*
 * Used to satisfy dependencies for devices that need to be
 * run early or in a particular order. Most likely your device doesn't fall
 * into this category, and thus the driver should not be added here. The
 * EPROBE_DEFER can satisfy most dependency problems.
 */
void __init msm_8974_add_drivers(void)
{
	msm_init_modem_notifier_list();
	msm_smd_init();
	msm_rpm_driver_init();
	msm_lpmrs_module_init();
	rpm_regulator_smd_driver_init();
	msm_spm_device_init();
	regulator_stub_init();
	if (machine_is_msm8974_rumi())
		msm_clock_init(&msm_dummy_clock_init_data);
	else
		msm_clock_init(&msm8974_clock_init_data);
	msm8974_init_buses();
}
开发者ID:de-wolff，项目名称:caf_device_kernel_msm，代码行数:21，代码来源:board-8974.c


示例16: msm8974_add_drivers

void __init msm8974_add_drivers(void)
{
	msm_init_modem_notifier_list();
	msm_smd_init();
	msm_rpm_driver_init();
	msm_lpmrs_module_init();
	rpm_regulator_smd_driver_init();
	msm_spm_device_init();
	krait_power_init();
	if (of_board_is_rumi())
		msm_clock_init(&msm8974_rumi_clock_init_data);
	else
		msm_clock_init(&msm8974_clock_init_data);
	tsens_tm_init_driver();
#ifdef CONFIG_INTELLI_THERMAL
	msm_thermal_init(NULL);
#else
 	msm_thermal_device_init();
#endif
#ifdef CONFIG_LGE_LCD_TUNING
	lge_add_lcd_misc_devices();
#endif
	lge_add_persistent_device();
#ifdef CONFIG_LGE_QFPROM_INTERFACE
	lge_add_qfprom_devices();
#endif
#ifdef CONFIG_LGE_ECO_MODE
	lge_add_lge_kernel_devices();
#endif
#ifdef CONFIG_LGE_DIAG_ENABLE_SYSFS
	lge_add_diag_devices();
#endif
#ifdef CONFIG_MACH_MSM8974_G2_VZW
	lge_add_android_usb_devices();
#endif
/*                                                                    */
#if defined(CONFIG_BCMDHD) || defined(CONFIG_BCMDHD_MODULE)
	init_bcm_wifi();
#endif
/*                                                                    */
#if defined(CONFIG_LCD_KCAL)
/*             
                          
                                
*/
	lge_add_lcd_kcal_devices();
#endif /* CONFIG_LCD_KCAL */
}
开发者ID:RenderBroken，项目名称:msm8974_G2_render_kernel，代码行数:48，代码来源:board-8974-g2-tel_au.c


示例17: msm8974_add_drivers

void __init msm8974_add_drivers(void)
{
	msm_smem_init();
	msm_init_modem_notifier_list();
	msm_smd_init();
	msm_rpm_driver_init();
	msm_pm_sleep_status_init();
	rpm_regulator_smd_driver_init();
	msm_spm_device_init();
	krait_power_init();
	if (of_board_is_rumi())
		msm_clock_init(&msm8974_rumi_clock_init_data);
	else
		msm_clock_init(&msm8974_clock_init_data);
	tsens_tm_init_driver();
	msm_thermal_device_init();
	lge_add_persistent_device();
#ifdef CONFIG_LGE_QFPROM_INTERFACE
	lge_add_qfprom_devices();
#endif
#ifdef CONFIG_LGE_DIAG_ENABLE_SYSFS
	lge_add_diag_devices();
#endif
#ifdef CONFIG_LGE_LCD_TUNING
	lge_add_lcd_misc_devices();
#endif
/*                                                                    */
#if defined(CONFIG_BCMDHD) || defined(CONFIG_BCMDHD_MODULE)
	init_bcm_wifi();
#endif
/*                                                                    */
#if defined(CONFIG_LCD_KCAL)
/*             
                          
                                
*/
	lge_add_lcd_kcal_devices();
#endif /* CONFIG_LCD_KCAL */
#if defined(CONFIG_LGE_PM_BATTERY_ID_CHECKER)
	lge_battery_id_devices();
#endif
#ifdef CONFIG_LGE_QSDL_SUPPORT
	lge_add_qsdl_device();
#endif
#ifdef CONFIG_USB_G_LGE_ANDROID
	lge_add_android_usb_devices();
#endif
}
开发者ID:beats4x，项目名称:kernel_lge_g3-v10m，代码行数:48，代码来源:board-8974-g3-us.c


示例18: msm8610_add_drivers

void __init msm8610_add_drivers(void)
{
	msm_init_modem_notifier_list();
	msm_smd_init();
	msm_rpm_driver_init();
	msm_spm_device_init();
	msm_pm_sleep_status_init();
	rpm_regulator_smd_driver_init();
	qpnp_regulator_init();
	tsens_tm_init_driver();
	msm_thermal_device_init();

	if (of_board_is_rumi())
		msm_clock_init(&msm8610_rumi_clock_init_data);
	else
		msm_clock_init(&msm8610_clock_init_data);
}
开发者ID:MattCrystal，项目名称:drunken-avenger，代码行数:17，代码来源:board-8610.c


示例19: msm8974_add_drivers

void __init msm8974_add_drivers(void)
{
	msm_smem_init();
	msm_init_modem_notifier_list();
	msm_smd_init();
	msm_rpm_driver_init();
	msm_pm_sleep_status_init();
	rpm_regulator_smd_driver_init();
	msm_spm_device_init();
	krait_power_init();
	if (of_board_is_rumi())
		msm_clock_init(&msm8974_rumi_clock_init_data);
	else
		msm_clock_init(&msm8974_clock_init_data);
	tsens_tm_init_driver();
	msm_thermal_device_init();
#ifdef CONFIG_LGE_LCD_TUNING
	lge_add_lcd_misc_devices();
#endif
	lge_add_persistent_device();
#ifdef CONFIG_LGE_QFPROM_INTERFACE
	lge_add_qfprom_devices();
#endif
#ifdef CONFIG_LGE_ECO_MODE
	lge_add_lge_kernel_devices();
#endif
/*                                                                    */
#if defined(CONFIG_BCMDHD) || defined(CONFIG_BCMDHD_MODULE)
	init_bcm_wifi();
#endif
/*                                                                    */
#if defined(CONFIG_LCD_KCAL)
/*             
                          
                                
*/
	lge_add_lcd_kcal_devices();
#endif /* CONFIG_LCD_KCAL */

#if defined(CONFIG_LGE_PM_BATTERY_ID_CHECKER)
	lge_battery_id_devices();
#endif
#if defined(CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_VU3EVB)
	vu3ebv_init_input();
#endif
}
开发者ID:AmperificSuperKANG，项目名称:lge-kernel-d802，代码行数:46，代码来源:board-8974-vu3-kr.c


示例20: msm8974_add_drivers

/*
 * Used to satisfy dependencies for devices that need to be
 * run early or in a particular order. Most likely your device doesn't fall
 * into this category, and thus the driver should not be added here. The
 * EPROBE_DEFER can satisfy most dependency problems.
 */
void __init msm8974_add_drivers(void)
{
	msm_init_modem_notifier_list();
	msm_smd_init();
	msm_rpm_driver_init();
	msm_lpmrs_module_init();
	rpm_regulator_smd_driver_init();
	msm_spm_device_init();
	krait_power_init();
	if (machine_is_msm8974_rumi())
		msm_clock_init(&msm8974_rumi_clock_init_data);
	else
		msm_clock_init(&msm8974_clock_init_data);
	msm8974_init_buses();
	msm_thermal_device_init();
	mxt_init_vkeys_8974();
}
开发者ID:Gilbert32，项目名称:dellstreak5-kernel-3.4，代码行数:23，代码来源:board-8974.c



注：本文中的rpm_regulator_smd_driver_init函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花
握手
雷人
路过
鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
More+
上一篇：
C++ rpmlog函数代码示例发布时间：2022-05-30
下一篇：
C++ rpmExpand函数代码示例发布时间：2022-05-30
热门推荐
More+
热门话题
More+
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服（服务时间 9:00～18:00）

在线QQ客服
地址：深圳市南山区西丽大学城创智工业园
电邮：jeky_zhao#qq.com
移动电话：139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap