u32 intel_panel_get_max_backlight(struct drm_device *dev)
{
	struct drm_i915_private *dev_priv = dev->dev_private;
	u32 max;

	max = i915_read_blc_pwm_ctl(dev_priv);
	if (max == 0) {
		/* XXX add code here to query mode clock or hardware clock
		 * and program max PWM appropriately.
		 */
		printk_once(KERN_WARNING "fixme: max PWM is zero.\n");
		return 1;
	}

	if (HAS_PCH_SPLIT(dev)) {
		max >>= 16;
	} else {
		if (IS_PINEVIEW(dev)) {

__printf(2, 3) int nf_log_buf_add(struct nf_log_buf *m, const char *f, ...)
{
	va_list args;
	int len;

	if (likely(m->count < S_SIZE)) {
		va_start(args, f);
		len = vsnprintf(m->buf + m->count, S_SIZE - m->count, f, args);
		va_end(args);
		if (likely(m->count + len < S_SIZE)) {
			m->count += len;
			return 0;
		}
	}
	m->count = S_SIZE;
	printk_once(KERN_ERR KBUILD_MODNAME " please increase S_SIZE\n");
	return -1;
}

static unsigned int cpufreq_p4_get_frequency(struct cpuinfo_x86 *c)
{
	if (c->x86 == 0x06) {
		if (cpu_has(c, X86_FEATURE_EST))
			printk_once(KERN_WARNING PFX "Warning: EST-capable "
			       "CPU detected. The acpi-cpufreq module offers "
			       "voltage scaling in addition to frequency "
			       "scaling. You should use that instead of "
			       "p4-clockmod, if possible.\n");
		switch (c->x86_model) {
		case 0x0E: /* Core */
		case 0x0F: /* Core Duo */
		case 0x16: /* Celeron Core */
		case 0x1C: /* Atom */
			p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS;
			return speedstep_get_frequency(SPEEDSTEP_CPU_PCORE);
		case 0x0D: /* Pentium M (Dothan) */
			p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS;
			/* fall through */
		case 0x09: /* Pentium M (Banias) */
			return speedstep_get_frequency(SPEEDSTEP_CPU_PM);
		}
	}

	if (c->x86 != 0xF)
		return 0;

	/* on P-4s, the TSC runs with constant frequency independent whether
	 * throttling is active or not. */
	p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS;

	if (speedstep_detect_processor() == SPEEDSTEP_CPU_P4M) {
		printk(KERN_WARNING PFX "Warning: Pentium 4-M detected. "
		       "The speedstep-ich or acpi cpufreq modules offer "
		       "voltage scaling in addition of frequency scaling. "
		       "You should use either one instead of p4-clockmod, "
		       "if possible.\n");
		return speedstep_get_frequency(SPEEDSTEP_CPU_P4M);
	}

	return speedstep_get_frequency(SPEEDSTEP_CPU_P4D);
}

static int check_syslog_permissions(int type, bool from_file)
{
	if (from_file && type != SYSLOG_ACTION_OPEN)
		return 0;

	if (syslog_action_restricted(type)) {
		if (capable(CAP_SYSLOG))
			return 0;
		
		if (capable(CAP_SYS_ADMIN)) {
			printk_once(KERN_WARNING "%s (%d): "
				 "Attempt to access syslog with CAP_SYS_ADMIN "
				 "but no CAP_SYSLOG (deprecated).\n",
				 current->comm, task_pid_nr(current));
			return 0;
		}
		return -EPERM;
	}
	return 0;
}

/* Query where a cpu is now.  Return codes #defined in plpar_wrappers.h */
int smp_query_cpu_stopped(unsigned int pcpu)
{
	int cpu_status, status;
	int qcss_tok = rtas_token("query-cpu-stopped-state");

	if (qcss_tok == RTAS_UNKNOWN_SERVICE) {
		printk_once(KERN_INFO
			"Firmware doesn't support query-cpu-stopped-state\n");
		return QCSS_HARDWARE_ERROR;
	}

	status = rtas_call(qcss_tok, 1, 2, &cpu_status, pcpu);
	if (status != 0) {
		printk(KERN_ERR
		       "RTAS query-cpu-stopped-state failed: %i\n", status);
		return status;
	}

	return cpu_status;
}

/*
 * Get a unique ID including its location so that the client can identify
 * the exported device.
 */
int
xfs_fs_get_uuid(
	struct super_block	*sb,
	u8			*buf,
	u32			*len,
	u64			*offset)
{
	struct xfs_mount	*mp = XFS_M(sb);

	printk_once(KERN_NOTICE
"XFS (%s): using experimental pNFS feature, use at your own risk!\n",
		mp->m_fsname);

	if (*len < sizeof(uuid_t))
		return -EINVAL;

	memcpy(buf, &mp->m_sb.sb_uuid, sizeof(uuid_t));
	*len = sizeof(uuid_t);
	*offset = offsetof(struct xfs_dsb, sb_uuid);
	return 0;
}

static u32 acpi_osi_handler(acpi_string interface, u32 supported)
{
	if (!strcmp("Linux", interface)) {

		printk_once(KERN_NOTICE FW_BUG PREFIX
			"BIOS _OSI(Linux) query %s%s\n",
			osi_linux.enable ? "honored" : "ignored",
			osi_linux.cmdline ? " via cmdline" :
			osi_linux.dmi ? " via DMI" : "");
	}

	if (!strcmp("Darwin", interface)) {
		/*
		 * Apple firmware will behave poorly if it receives positive
		 * answers to "Darwin" and any other OS. Respond positively
		 * to Darwin and then disable all other vendor strings.
		 */
		acpi_update_interfaces(ACPI_DISABLE_ALL_VENDOR_STRINGS);
		supported = ACPI_UINT32_MAX;
	}

	return supported;
}

/*
 * Register access.
 */
int rt2x00mmio_regbusy_read(struct rt2x00_dev *rt2x00dev,
			    const unsigned int offset,
			    const struct rt2x00_field32 field,
			    u32 *reg)
{
	unsigned int i;

	if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags))
		return 0;

	for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
		*reg = rt2x00mmio_register_read(rt2x00dev, offset);
		if (!rt2x00_get_field32(*reg, field))
			return 1;
		udelay(REGISTER_BUSY_DELAY);
	}

	printk_once(KERN_ERR "%s() Indirect register access failed: "
	      "offset=0x%.08x, value=0x%.08x\n", __func__, offset, *reg);
	*reg = ~0;

	return 0;
}

SYSCALL_DEFINE3(setitimer, int, which, struct itimerval __user *, value,
		struct itimerval __user *, ovalue)
{
	struct itimerval set_buffer, get_buffer;
	int error;

	if (value) {
		if(copy_from_user(&set_buffer, value, sizeof(set_buffer)))
			return -EFAULT;
	} else {
		memset(&set_buffer, 0, sizeof(set_buffer));
		printk_once(KERN_WARNING "%s calls setitimer() with new_value NULL pointer."
			    " Misfeature support will be removed\n",
			    current->comm);
	}

	error = do_setitimer(which, &set_buffer, ovalue ? &get_buffer : NULL);
	if (error || !ovalue)
		return error;

	if (copy_to_user(ovalue, &get_buffer, sizeof(get_buffer)))
		return -EFAULT;
	return 0;
}

static void *mlx4_en_add(struct mlx4_dev *dev)
{
	struct mlx4_en_dev *mdev;
	int i;

	printk_once(KERN_INFO "%s", mlx4_en_version);

	mdev = kzalloc(sizeof(*mdev), GFP_KERNEL);
	if (!mdev)
		goto err_free_res;

	if (mlx4_pd_alloc(dev, &mdev->priv_pdn))
		goto err_free_dev;

	if (mlx4_uar_alloc(dev, &mdev->priv_uar))
		goto err_pd;

	mdev->uar_map = ioremap((phys_addr_t) mdev->priv_uar.pfn << PAGE_SHIFT,
				PAGE_SIZE);
	if (!mdev->uar_map)
		goto err_uar;
	spin_lock_init(&mdev->uar_lock);

	mdev->dev = dev;
	mdev->dma_device = &dev->persist->pdev->dev;
	mdev->pdev = dev->persist->pdev;
	mdev->device_up = false;

	mdev->LSO_support = !!(dev->caps.flags & (1 << 15));
	if (!mdev->LSO_support)
		mlx4_warn(mdev, "LSO not supported, please upgrade to later FW version to enable LSO\n");

	if (mlx4_mr_alloc(mdev->dev, mdev->priv_pdn, 0, ~0ull,
			 MLX4_PERM_LOCAL_WRITE |  MLX4_PERM_LOCAL_READ,
			 0, 0, &mdev->mr)) {
		mlx4_err(mdev, "Failed allocating memory region\n");
		goto err_map;
	}
	if (mlx4_mr_enable(mdev->dev, &mdev->mr)) {
		mlx4_err(mdev, "Failed enabling memory region\n");
		goto err_mr;
	}

	/* Build device profile according to supplied module parameters */
	if (mlx4_en_get_profile(mdev)) {
		mlx4_err(mdev, "Bad module parameters, aborting\n");
		goto err_mr;
	}

	/* Configure which ports to start according to module parameters */
	mdev->port_cnt = 0;
	mlx4_foreach_port(i, dev, MLX4_PORT_TYPE_ETH)
		mdev->port_cnt++;

	/* Initialize time stamp mechanism */
	if (mdev->dev->caps.flags2 & MLX4_DEV_CAP_FLAG2_TS)
		mlx4_en_init_timestamp(mdev);

	/* Set default number of RX rings*/
	mlx4_en_set_num_rx_rings(mdev);

	/* Create our own workqueue for reset/multicast tasks
	 * Note: we cannot use the shared workqueue because of deadlocks caused
	 *       by the rtnl lock */
	mdev->workqueue = create_singlethread_workqueue("mlx4_en");
	if (!mdev->workqueue)
		goto err_mr;

	/* At this stage all non-port specific tasks are complete:
	 * mark the card state as up */
	mutex_init(&mdev->state_lock);
	mdev->device_up = true;

	/* Setup ports */

	/* Create a netdev for each port */
	mlx4_foreach_port(i, dev, MLX4_PORT_TYPE_ETH) {
		mlx4_info(mdev, "Activating port:%d\n", i);
		if (mlx4_en_init_netdev(mdev, i, &mdev->profile.prof[i]))
			mdev->pndev[i] = NULL;
	}

//.........这里部分代码省略.........
	/* BB disable following printk later */
	cifs_dbg(FYI, "%s length: 0x%x, smb_buf_length: 0x%x\n",
		 __func__, length, len);

	/*
	 * Add function to do table lookup of StructureSize by command
	 * ie Validate the wct via smb2_struct_sizes table above
	 */

	if (length < sizeof(struct smb2_pdu)) {
		if ((length >= sizeof(struct smb2_hdr)) && (hdr->Status != 0)) {
			pdu->StructureSize2 = 0;
			/*
			 * As with SMB/CIFS, on some error cases servers may
			 * not return wct properly
			 */
			return 0;
		} else {
			cifs_dbg(VFS, "Length less than SMB header size\n");
		}
		return 1;
	}
	if (len > CIFSMaxBufSize + MAX_SMB2_HDR_SIZE - 4) {
		cifs_dbg(VFS, "SMB length greater than maximum, mid=%llu\n",
			 mid);
		return 1;
	}

	if (check_smb2_hdr(hdr, mid))
		return 1;

	if (hdr->StructureSize != SMB2_HEADER_STRUCTURE_SIZE) {
		cifs_dbg(VFS, "Illegal structure size %u\n",
			 le16_to_cpu(hdr->StructureSize));
		return 1;
	}

	command = le16_to_cpu(hdr->Command);
	if (command >= NUMBER_OF_SMB2_COMMANDS) {
		cifs_dbg(VFS, "Illegal SMB2 command %d\n", command);
		return 1;
	}

	if (smb2_rsp_struct_sizes[command] != pdu->StructureSize2) {
		if (command != SMB2_OPLOCK_BREAK_HE && (hdr->Status == 0 ||
		    pdu->StructureSize2 != SMB2_ERROR_STRUCTURE_SIZE2)) {
			/* error packets have 9 byte structure size */
			cifs_dbg(VFS, "Illegal response size %u for command %d\n",
				 le16_to_cpu(pdu->StructureSize2), command);
			return 1;
		} else if (command == SMB2_OPLOCK_BREAK_HE && (hdr->Status == 0)
			   && (le16_to_cpu(pdu->StructureSize2) != 44)
			   && (le16_to_cpu(pdu->StructureSize2) != 36)) {
			/* special case for SMB2.1 lease break message */
			cifs_dbg(VFS, "Illegal response size %d for oplock break\n",
				 le16_to_cpu(pdu->StructureSize2));
			return 1;
		}
	}

	if (4 + len != length) {
		cifs_dbg(VFS, "Total length %u RFC1002 length %u mismatch mid %llu\n",
			 length, 4 + len, mid);
		return 1;
	}

	clc_len = smb2_calc_size(hdr);

	if (4 + len != clc_len) {
		cifs_dbg(FYI, "Calculated size %u length %u mismatch mid %llu\n",
			 clc_len, 4 + len, mid);
		/* create failed on symlink */
		if (command == SMB2_CREATE_HE &&
		    hdr->Status == STATUS_STOPPED_ON_SYMLINK)
			return 0;
		/* Windows 7 server returns 24 bytes more */
		if (clc_len + 20 == len && command == SMB2_OPLOCK_BREAK_HE)
			return 0;
		/* server can return one byte more due to implied bcc[0] */
		if (clc_len == 4 + len + 1)
			return 0;

		/*
		 * MacOS server pads after SMB2.1 write response with 3 bytes
		 * of junk. Other servers match RFC1001 len to actual
		 * SMB2/SMB3 frame length (header + smb2 response specific data)
		 * Log the server error (once), but allow it and continue
		 * since the frame is parseable.
		 */
		if (clc_len < 4 /* RFC1001 header size */ + len) {
			printk_once(KERN_WARNING
				"SMB2 server sent bad RFC1001 len %d not %d\n",
				len, clc_len - 4);
			return 0;
		}

		return 1;
	}
	return 0;
}

/*
 * In order to set the CMOS clock precisely, set_rtc_mmss has to be
 * called 500 ms after the second nowtime has started, because when
 * nowtime is written into the registers of the CMOS clock, it will
 * jump to the next second precisely 500 ms later. Check the Motorola
 * MC146818A or Dallas DS12887 data sheet for details.
 *
 * BUG: This routine does not handle hour overflow properly; it just
 *      sets the minutes. Usually you'll only notice that after reboot!
 */
int mach_set_rtc_mmss(unsigned long nowtime)
{
	int real_seconds, real_minutes, cmos_minutes;
	unsigned char save_control, save_freq_select;
	unsigned long flags;
	int retval = 0;

	spin_lock_irqsave(&rtc_lock, flags);

	 /* tell the clock it's being set */
	save_control = CMOS_READ(RTC_CONTROL);
	CMOS_WRITE((save_control|RTC_SET), RTC_CONTROL);

	/* stop and reset prescaler */
	save_freq_select = CMOS_READ(RTC_FREQ_SELECT);
	CMOS_WRITE((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT);

	cmos_minutes = CMOS_READ(RTC_MINUTES);
	if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD)
		cmos_minutes = bcd2bin(cmos_minutes);

	/*
	 * since we're only adjusting minutes and seconds,
	 * don't interfere with hour overflow. This avoids
	 * messing with unknown time zones but requires your
	 * RTC not to be off by more than 15 minutes
	 */
	real_seconds = nowtime % 60;
	real_minutes = nowtime / 60;
	/* correct for half hour time zone */
	if (((abs(real_minutes - cmos_minutes) + 15)/30) & 1)
		real_minutes += 30;
	real_minutes %= 60;

	if (abs(real_minutes - cmos_minutes) < 30) {
		if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
			real_seconds = bin2bcd(real_seconds);
			real_minutes = bin2bcd(real_minutes);
		}
		CMOS_WRITE(real_seconds, RTC_SECONDS);
		CMOS_WRITE(real_minutes, RTC_MINUTES);
	} else {
		printk_once(KERN_NOTICE
		       "set_rtc_mmss: can't update from %d to %d\n",
		       cmos_minutes, real_minutes);
		retval = -1;
	}

	/* The following flags have to be released exactly in this order,
	 * otherwise the DS12887 (popular MC146818A clone with integrated
	 * battery and quartz) will not reset the oscillator and will not
	 * update precisely 500 ms later. You won't find this mentioned in
	 * the Dallas Semiconductor data sheets, but who believes data
	 * sheets anyway ...                           -- Markus Kuhn
	 */
	CMOS_WRITE(save_control, RTC_CONTROL);
	CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT);

	spin_unlock_irqrestore(&rtc_lock, flags);

	return retval;
}

int _ext4_get_encryption_info(struct inode *inode)
{
	struct ext4_inode_info *ei = EXT4_I(inode);
	struct ext4_crypt_info *crypt_info;
	char full_key_descriptor[EXT4_KEY_DESC_PREFIX_SIZE +
				 (EXT4_KEY_DESCRIPTOR_SIZE * 2) + 1];
	struct key *keyring_key = NULL;
	struct ext4_encryption_key *master_key;
	struct ext4_encryption_context ctx;
	struct user_key_payload *ukp;
	struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb);
	struct crypto_ablkcipher *ctfm;
	const char *cipher_str;
	char raw_key[EXT4_MAX_KEY_SIZE];
	char mode;
	int res;

	if (!ext4_read_workqueue) {
		res = ext4_init_crypto();
		if (res)
			return res;
	}

retry:
	crypt_info = ACCESS_ONCE(ei->i_crypt_info);
	if (crypt_info) {
		if (!crypt_info->ci_keyring_key ||
		    key_validate(crypt_info->ci_keyring_key) == 0)
			return 0;
		ext4_free_encryption_info(inode, crypt_info);
		goto retry;
	}

	res = ext4_xattr_get(inode, EXT4_XATTR_INDEX_ENCRYPTION,
				 EXT4_XATTR_NAME_ENCRYPTION_CONTEXT,
				 &ctx, sizeof(ctx));
	if (res < 0) {
		if (!DUMMY_ENCRYPTION_ENABLED(sbi))
			return res;
		ctx.contents_encryption_mode = EXT4_ENCRYPTION_MODE_AES_256_XTS;
		ctx.filenames_encryption_mode =
			EXT4_ENCRYPTION_MODE_AES_256_CTS;
		ctx.flags = 0;
	} else if (res != sizeof(ctx))
		return -EINVAL;
	res = 0;

	crypt_info = kmem_cache_alloc(ext4_crypt_info_cachep, GFP_KERNEL);
	if (!crypt_info)
		return -ENOMEM;

	crypt_info->ci_flags = ctx.flags;
	crypt_info->ci_data_mode = ctx.contents_encryption_mode;
	crypt_info->ci_filename_mode = ctx.filenames_encryption_mode;
	crypt_info->ci_ctfm = NULL;
	crypt_info->ci_keyring_key = NULL;
	memcpy(crypt_info->ci_master_key, ctx.master_key_descriptor,
	       sizeof(crypt_info->ci_master_key));
	if (S_ISREG(inode->i_mode))
		mode = crypt_info->ci_data_mode;
	else if (S_ISDIR(inode->i_mode) || S_ISLNK(inode->i_mode))
		mode = crypt_info->ci_filename_mode;
	else
		BUG();
	switch (mode) {
	case EXT4_ENCRYPTION_MODE_AES_256_XTS:
		cipher_str = "xts(aes)";
		break;
	case EXT4_ENCRYPTION_MODE_AES_256_CTS:
		cipher_str = "cts(cbc(aes))";
		break;
	default:
		printk_once(KERN_WARNING
			    "ext4: unsupported key mode %d (ino %u)\n",
			    mode, (unsigned) inode->i_ino);
		res = -ENOKEY;
		goto out;
	}
	if (DUMMY_ENCRYPTION_ENABLED(sbi)) {
		memset(raw_key, 0x42, EXT4_AES_256_XTS_KEY_SIZE);
		goto got_key;
	}
	memcpy(full_key_descriptor, EXT4_KEY_DESC_PREFIX,
	       EXT4_KEY_DESC_PREFIX_SIZE);
	sprintf(full_key_descriptor + EXT4_KEY_DESC_PREFIX_SIZE,
		"%*phN", EXT4_KEY_DESCRIPTOR_SIZE,
		ctx.master_key_descriptor);
	full_key_descriptor[EXT4_KEY_DESC_PREFIX_SIZE +
			    (2 * EXT4_KEY_DESCRIPTOR_SIZE)] = '\0';
	keyring_key = request_key(&key_type_logon, full_key_descriptor, NULL);
	if (IS_ERR(keyring_key)) {
		res = PTR_ERR(keyring_key);
		keyring_key = NULL;
		goto out;
	}
	crypt_info->ci_keyring_key = keyring_key;
	if (keyring_key->type != &key_type_logon) {
		printk_once(KERN_WARNING
			    "ext4: key type must be logon\n");
		res = -ENOKEY;
//.........这里部分代码省略.........

static void *mlx5_ib_add(struct mlx5_core_dev *mdev)
{
	struct mlx5_ib_dev *dev;
	int err;
	int i;

	/* don't create IB instance over Eth ports, no RoCE yet! */
	if (MLX5_CAP_GEN(mdev, port_type) == MLX5_CAP_PORT_TYPE_ETH)
		return NULL;

	printk_once(KERN_INFO "%s", mlx5_version);

	dev = (struct mlx5_ib_dev *)ib_alloc_device(sizeof(*dev));
	if (!dev)
		return NULL;

	dev->mdev = mdev;

	err = get_port_caps(dev);
	if (err)
		goto err_dealloc;

	if (mlx5_use_mad_ifc(dev))
		get_ext_port_caps(dev);

	MLX5_INIT_DOORBELL_LOCK(&dev->uar_lock);

	strlcpy(dev->ib_dev.name, "mlx5_%d", IB_DEVICE_NAME_MAX);
	dev->ib_dev.owner		= THIS_MODULE;
	dev->ib_dev.node_type		= RDMA_NODE_IB_CA;
	dev->ib_dev.local_dma_lkey	= 0 /* not supported for now */;
	dev->num_ports		= MLX5_CAP_GEN(mdev, num_ports);
	dev->ib_dev.phys_port_cnt     = dev->num_ports;
	dev->ib_dev.num_comp_vectors    =
		dev->mdev->priv.eq_table.num_comp_vectors;
	dev->ib_dev.dma_device	= &mdev->pdev->dev;

	dev->ib_dev.uverbs_abi_ver	= MLX5_IB_UVERBS_ABI_VERSION;
	dev->ib_dev.uverbs_cmd_mask	=
		(1ull << IB_USER_VERBS_CMD_GET_CONTEXT)		|
		(1ull << IB_USER_VERBS_CMD_QUERY_DEVICE)	|
		(1ull << IB_USER_VERBS_CMD_QUERY_PORT)		|
		(1ull << IB_USER_VERBS_CMD_ALLOC_PD)		|
		(1ull << IB_USER_VERBS_CMD_DEALLOC_PD)		|
		(1ull << IB_USER_VERBS_CMD_REG_MR)		|
		(1ull << IB_USER_VERBS_CMD_DEREG_MR)		|
		(1ull << IB_USER_VERBS_CMD_CREATE_COMP_CHANNEL)	|
		(1ull << IB_USER_VERBS_CMD_CREATE_CQ)		|
		(1ull << IB_USER_VERBS_CMD_RESIZE_CQ)		|
		(1ull << IB_USER_VERBS_CMD_DESTROY_CQ)		|
		(1ull << IB_USER_VERBS_CMD_CREATE_QP)		|
		(1ull << IB_USER_VERBS_CMD_MODIFY_QP)		|
		(1ull << IB_USER_VERBS_CMD_QUERY_QP)		|
		(1ull << IB_USER_VERBS_CMD_DESTROY_QP)		|
		(1ull << IB_USER_VERBS_CMD_ATTACH_MCAST)	|
		(1ull << IB_USER_VERBS_CMD_DETACH_MCAST)	|
		(1ull << IB_USER_VERBS_CMD_CREATE_SRQ)		|
		(1ull << IB_USER_VERBS_CMD_MODIFY_SRQ)		|
		(1ull << IB_USER_VERBS_CMD_QUERY_SRQ)		|
		(1ull << IB_USER_VERBS_CMD_DESTROY_SRQ)		|
		(1ull << IB_USER_VERBS_CMD_CREATE_XSRQ)		|
		(1ull << IB_USER_VERBS_CMD_OPEN_QP);
	dev->ib_dev.uverbs_ex_cmd_mask =
		(1ull << IB_USER_VERBS_EX_CMD_QUERY_DEVICE);

	dev->ib_dev.query_device	= mlx5_ib_query_device;
	dev->ib_dev.query_port		= mlx5_ib_query_port;
	dev->ib_dev.query_gid		= mlx5_ib_query_gid;
	dev->ib_dev.query_pkey		= mlx5_ib_query_pkey;
	dev->ib_dev.modify_device	= mlx5_ib_modify_device;
	dev->ib_dev.modify_port		= mlx5_ib_modify_port;
	dev->ib_dev.alloc_ucontext	= mlx5_ib_alloc_ucontext;
	dev->ib_dev.dealloc_ucontext	= mlx5_ib_dealloc_ucontext;
	dev->ib_dev.mmap		= mlx5_ib_mmap;
	dev->ib_dev.alloc_pd		= mlx5_ib_alloc_pd;
	dev->ib_dev.dealloc_pd		= mlx5_ib_dealloc_pd;
	dev->ib_dev.create_ah		= mlx5_ib_create_ah;
	dev->ib_dev.query_ah		= mlx5_ib_query_ah;
	dev->ib_dev.destroy_ah		= mlx5_ib_destroy_ah;
	dev->ib_dev.create_srq		= mlx5_ib_create_srq;
	dev->ib_dev.modify_srq		= mlx5_ib_modify_srq;
	dev->ib_dev.query_srq		= mlx5_ib_query_srq;
	dev->ib_dev.destroy_srq		= mlx5_ib_destroy_srq;
	dev->ib_dev.post_srq_recv	= mlx5_ib_post_srq_recv;
	dev->ib_dev.create_qp		= mlx5_ib_create_qp;
	dev->ib_dev.modify_qp		= mlx5_ib_modify_qp;
	dev->ib_dev.query_qp		= mlx5_ib_query_qp;
	dev->ib_dev.destroy_qp		= mlx5_ib_destroy_qp;
	dev->ib_dev.post_send		= mlx5_ib_post_send;
	dev->ib_dev.post_recv		= mlx5_ib_post_recv;
	dev->ib_dev.create_cq		= mlx5_ib_create_cq;
	dev->ib_dev.modify_cq		= mlx5_ib_modify_cq;
	dev->ib_dev.resize_cq		= mlx5_ib_resize_cq;
	dev->ib_dev.destroy_cq		= mlx5_ib_destroy_cq;
	dev->ib_dev.poll_cq		= mlx5_ib_poll_cq;
	dev->ib_dev.req_notify_cq	= mlx5_ib_arm_cq;
	dev->ib_dev.get_dma_mr		= mlx5_ib_get_dma_mr;
	dev->ib_dev.reg_user_mr		= mlx5_ib_reg_user_mr;
	dev->ib_dev.dereg_mr		= mlx5_ib_dereg_mr;
	dev->ib_dev.attach_mcast	= mlx5_ib_mcg_attach;
//.........这里部分代码省略.........

static void *mlx4_en_add(struct mlx4_dev *dev)
{
    struct mlx4_en_dev *mdev;
    int i;
    int err;

    printk_once(KERN_INFO "%s", mlx4_en_version);

    mdev = kzalloc(sizeof *mdev, GFP_KERNEL);
    if (!mdev) {
        dev_err(&dev->pdev->dev, "Device struct alloc failed, "
                "aborting.\n");
        err = -ENOMEM;
        goto err_free_res;
    }

    if (mlx4_pd_alloc(dev, &mdev->priv_pdn))
        goto err_free_dev;

    if (mlx4_uar_alloc(dev, &mdev->priv_uar))
        goto err_pd;

    mdev->uar_map = ioremap((phys_addr_t) mdev->priv_uar.pfn << PAGE_SHIFT,
                            PAGE_SIZE);
    if (!mdev->uar_map)
        goto err_uar;
    spin_lock_init(&mdev->uar_lock);

    mdev->dev = dev;
    mdev->dma_device = &(dev->pdev->dev);
    mdev->pdev = dev->pdev;
    mdev->device_up = false;

    mdev->LSO_support = !!(dev->caps.flags & (1 << 15));
    if (!mdev->LSO_support)
        mlx4_warn(mdev, "LSO not supported, please upgrade to later "
                  "FW version to enable LSO\n");

    if (mlx4_mr_alloc(mdev->dev, mdev->priv_pdn, 0, ~0ull,
                      MLX4_PERM_LOCAL_WRITE |  MLX4_PERM_LOCAL_READ,
                      0, 0, &mdev->mr)) {
        mlx4_err(mdev, "Failed allocating memory region\n");
        goto err_map;
    }
    if (mlx4_mr_enable(mdev->dev, &mdev->mr)) {
        mlx4_err(mdev, "Failed enabling memory region\n");
        goto err_mr;
    }

    /* Build device profile according to supplied module parameters */
    err = mlx4_en_get_profile(mdev);
    if (err) {
        mlx4_err(mdev, "Bad module parameters, aborting.\n");
        goto err_mr;
    }

    /* Configure which ports to start according to module parameters */
    mdev->port_cnt = 0;
    mlx4_foreach_port(i, dev, MLX4_PORT_TYPE_ETH)
    mdev->port_cnt++;


    mlx4_foreach_port(i, dev, MLX4_PORT_TYPE_ETH) {
        if (!dev->caps.comp_pool) {
            mdev->profile.prof[i].rx_ring_num =
                rounddown_pow_of_two(max_t(int, MIN_RX_RINGS,
                                           min_t(int,
                                                 dev->caps.num_comp_vectors,
                                                 DEF_RX_RINGS)));
        } else {

int _f2fs_get_encryption_info(struct inode *inode)
{
	struct f2fs_inode_info *fi = F2FS_I(inode);
	struct f2fs_crypt_info *crypt_info;
	char full_key_descriptor[F2FS_KEY_DESC_PREFIX_SIZE +
				(F2FS_KEY_DESCRIPTOR_SIZE * 2) + 1];
	struct key *keyring_key = NULL;
	struct f2fs_encryption_key *master_key;
	struct f2fs_encryption_context ctx;
	const struct user_key_payload *ukp;
	struct crypto_ablkcipher *ctfm;
	const char *cipher_str;
	char raw_key[F2FS_MAX_KEY_SIZE];
	char mode;
	int res;

	res = f2fs_crypto_initialize();
	if (res)
		return res;
retry:
	crypt_info = ACCESS_ONCE(fi->i_crypt_info);
	if (crypt_info) {
		if (!crypt_info->ci_keyring_key ||
				key_validate(crypt_info->ci_keyring_key) == 0)
			return 0;
		f2fs_free_encryption_info(inode, crypt_info);
		goto retry;
	}

	res = f2fs_getxattr(inode, F2FS_XATTR_INDEX_ENCRYPTION,
				F2FS_XATTR_NAME_ENCRYPTION_CONTEXT,
				&ctx, sizeof(ctx), NULL);
	if (res < 0)
		return res;
	else if (res != sizeof(ctx))
		return -EINVAL;
	res = 0;

	crypt_info = kmem_cache_alloc(f2fs_crypt_info_cachep, GFP_NOFS);
	if (!crypt_info)
		return -ENOMEM;

	crypt_info->ci_flags = ctx.flags;
	crypt_info->ci_data_mode = ctx.contents_encryption_mode;
	crypt_info->ci_filename_mode = ctx.filenames_encryption_mode;
	crypt_info->ci_ctfm = NULL;
	crypt_info->ci_keyring_key = NULL;
	memcpy(crypt_info->ci_master_key, ctx.master_key_descriptor,
				sizeof(crypt_info->ci_master_key));
	if (S_ISREG(inode->i_mode))
		mode = crypt_info->ci_data_mode;
	else if (S_ISDIR(inode->i_mode) || S_ISLNK(inode->i_mode))
		mode = crypt_info->ci_filename_mode;
	else
		BUG();

	switch (mode) {
	case F2FS_ENCRYPTION_MODE_AES_256_XTS:
		cipher_str = "xts(aes)";
		break;
	case F2FS_ENCRYPTION_MODE_AES_256_CTS:
		cipher_str = "cts(cbc(aes))";
		break;
	default:
		printk_once(KERN_WARNING
			    "f2fs: unsupported key mode %d (ino %u)\n",
			    mode, (unsigned) inode->i_ino);
		res = -ENOKEY;
		goto out;
	}

	memcpy(full_key_descriptor, F2FS_KEY_DESC_PREFIX,
					F2FS_KEY_DESC_PREFIX_SIZE);
	sprintf(full_key_descriptor + F2FS_KEY_DESC_PREFIX_SIZE,
					"%*phN", F2FS_KEY_DESCRIPTOR_SIZE,
					ctx.master_key_descriptor);
	full_key_descriptor[F2FS_KEY_DESC_PREFIX_SIZE +
					(2 * F2FS_KEY_DESCRIPTOR_SIZE)] = '\0';
	keyring_key = request_key(&key_type_logon, full_key_descriptor, NULL);
	if (IS_ERR(keyring_key)) {
		res = PTR_ERR(keyring_key);
		keyring_key = NULL;
		goto out;
	}
	crypt_info->ci_keyring_key = keyring_key;
	BUG_ON(keyring_key->type != &key_type_logon);
	ukp = user_key_payload(keyring_key);
	if (ukp->datalen != sizeof(struct f2fs_encryption_key)) {
		res = -EINVAL;
		goto out;
	}
	master_key = (struct f2fs_encryption_key *)ukp->data;
	BUILD_BUG_ON(F2FS_AES_128_ECB_KEY_SIZE !=
				F2FS_KEY_DERIVATION_NONCE_SIZE);
	BUG_ON(master_key->size != F2FS_AES_256_XTS_KEY_SIZE);
	res = f2fs_derive_key_aes(ctx.nonce, master_key->raw,
				  raw_key);
	if (res)
		goto out;

//.........这里部分代码省略.........

int get_crypt_info(struct inode *inode)
{
	struct fscrypt_info *crypt_info;
	u8 full_key_descriptor[FS_KEY_DESC_PREFIX_SIZE +
				(FS_KEY_DESCRIPTOR_SIZE * 2) + 1];
	struct key *keyring_key = NULL;
	struct fscrypt_key *master_key;
	struct fscrypt_context ctx;
	struct user_key_payload *ukp;
	struct crypto_ablkcipher *ctfm;
	const char *cipher_str;
	u8 raw_key[FS_MAX_KEY_SIZE];
	u8 mode;
	int res;

	res = fscrypt_initialize();
	if (res)
		return res;

	if (!inode->i_sb->s_cop->get_context)
		return -EOPNOTSUPP;
retry:
	crypt_info = ACCESS_ONCE(inode->i_crypt_info);
	if (crypt_info) {
		if (!crypt_info->ci_keyring_key ||
				key_validate(crypt_info->ci_keyring_key) == 0)
			return 0;
		fscrypt_put_encryption_info(inode, crypt_info);
		goto retry;
	}

	res = inode->i_sb->s_cop->get_context(inode, &ctx, sizeof(ctx));
	if (res < 0) {
		if (!fscrypt_dummy_context_enabled(inode))
			return res;
		ctx.contents_encryption_mode = FS_ENCRYPTION_MODE_AES_256_XTS;
		ctx.filenames_encryption_mode = FS_ENCRYPTION_MODE_AES_256_CTS;
		ctx.flags = 0;
	} else if (res != sizeof(ctx)) {
		return -EINVAL;
	}
	res = 0;

	crypt_info = kmem_cache_alloc(fscrypt_info_cachep, GFP_NOFS);
	if (!crypt_info)
		return -ENOMEM;

	crypt_info->ci_flags = ctx.flags;
	crypt_info->ci_data_mode = ctx.contents_encryption_mode;
	crypt_info->ci_filename_mode = ctx.filenames_encryption_mode;
	crypt_info->ci_ctfm = NULL;
	crypt_info->ci_keyring_key = NULL;
	memcpy(crypt_info->ci_master_key, ctx.master_key_descriptor,
				sizeof(crypt_info->ci_master_key));
	if (S_ISREG(inode->i_mode))
		mode = crypt_info->ci_data_mode;
	else if (S_ISDIR(inode->i_mode) || S_ISLNK(inode->i_mode))
		mode = crypt_info->ci_filename_mode;
	else
		BUG();

	switch (mode) {
	case FS_ENCRYPTION_MODE_AES_256_XTS:
		cipher_str = "xts(aes)";
		break;
	case FS_ENCRYPTION_MODE_AES_256_CTS:
		cipher_str = "cts(cbc(aes))";
		break;
	default:
		printk_once(KERN_WARNING
			    "%s: unsupported key mode %d (ino %u)\n",
			    __func__, mode, (unsigned) inode->i_ino);
		res = -ENOKEY;
		goto out;
	}
	if (fscrypt_dummy_context_enabled(inode)) {
		memset(raw_key, 0x42, FS_AES_256_XTS_KEY_SIZE);
		goto got_key;
	}
	memcpy(full_key_descriptor, FS_KEY_DESC_PREFIX,
					FS_KEY_DESC_PREFIX_SIZE);
	sprintf(full_key_descriptor + FS_KEY_DESC_PREFIX_SIZE,
					"%*phN", FS_KEY_DESCRIPTOR_SIZE,
					ctx.master_key_descriptor);
	full_key_descriptor[FS_KEY_DESC_PREFIX_SIZE +
					(2 * FS_KEY_DESCRIPTOR_SIZE)] = '\0';
	keyring_key = request_key(&key_type_logon, full_key_descriptor, NULL);
	if (IS_ERR(keyring_key)) {
		res = PTR_ERR(keyring_key);
		keyring_key = NULL;
		goto out;
	}
	crypt_info->ci_keyring_key = keyring_key;
	if (keyring_key->type != &key_type_logon) {
		printk_once(KERN_WARNING
				"%s: key type must be logon\n", __func__);
		res = -ENOKEY;
		goto out;
	}
	down_read(&keyring_key->sem);
//.........这里部分代码省略.........

//.........这里部分代码省略.........
		if (check_amd_hwpstate_cpu(cpu)) {
			data->cpu_feature = SYSTEM_AMD_MSR_CAPABLE;
			break;
		}
		result = -ENODEV;
		goto err_unreg;
	default:
		pr_debug("Unknown addr space %d\n",
			(u32) (perf->control_register.space_id));
		result = -ENODEV;
		goto err_unreg;
	}

	data->freq_table = kzalloc(sizeof(*data->freq_table) *
		    (perf->state_count+1), GFP_KERNEL);
	if (!data->freq_table) {
		result = -ENOMEM;
		goto err_unreg;
	}

	/* detect transition latency */
	policy->cpuinfo.transition_latency = 0;
	for (i = 0; i < perf->state_count; i++) {
		if ((perf->states[i].transition_latency * 1000) >
		    policy->cpuinfo.transition_latency)
			policy->cpuinfo.transition_latency =
			    perf->states[i].transition_latency * 1000;
	}

	/* Check for high latency (>20uS) from buggy BIOSes, like on T42 */
	if (perf->control_register.space_id == ACPI_ADR_SPACE_FIXED_HARDWARE &&
	    policy->cpuinfo.transition_latency > 20 * 1000) {
		policy->cpuinfo.transition_latency = 20 * 1000;
		printk_once(KERN_INFO
			    "P-state transition latency capped at 20 uS\n");
	}

	/* table init */
	for (i = 0; i < perf->state_count; i++) {
		if (i > 0 && perf->states[i].core_frequency >=
		    data->freq_table[valid_states-1].frequency / 1000)
			continue;

		data->freq_table[valid_states].driver_data = i;
		data->freq_table[valid_states].frequency =
		    perf->states[i].core_frequency * 1000;
		valid_states++;
	}
	data->freq_table[valid_states].frequency = CPUFREQ_TABLE_END;
	perf->state = 0;

	result = cpufreq_table_validate_and_show(policy, data->freq_table);
	if (result)
		goto err_freqfree;

	if (perf->states[0].core_frequency * 1000 != policy->cpuinfo.max_freq)
		printk(KERN_WARNING FW_WARN "P-state 0 is not max freq\n");

	switch (perf->control_register.space_id) {
	case ACPI_ADR_SPACE_SYSTEM_IO:
		/*
		 * The core will not set policy->cur, because
		 * cpufreq_driver->get is NULL, so we need to set it here.
		 * However, we have to guess it, because the current speed is
		 * unknown and not detectable via IO ports.
		 */

/*
 * High resolution timer interrupt
 * Called with interrupts disabled
 */
void hrtimer_interrupt(struct clock_event_device *dev)
{
	struct hrtimer_cpu_base *cpu_base = this_cpu_ptr(&hrtimer_bases);
	ktime_t expires_next, now, entry_time, delta;
	int retries = 0;

	BUG_ON(!cpu_base->hres_active);
	cpu_base->nr_events++;
	dev->next_event.tv64 = KTIME_MAX;

	raw_spin_lock(&cpu_base->lock);
	entry_time = now = hrtimer_update_base(cpu_base);
retry:
	cpu_base->in_hrtirq = 1;
	/*
	 * We set expires_next to KTIME_MAX here with cpu_base->lock
	 * held to prevent that a timer is enqueued in our queue via
	 * the migration code. This does not affect enqueueing of
	 * timers which run their callback and need to be requeued on
	 * this CPU.
	 */
	cpu_base->expires_next.tv64 = KTIME_MAX;

	__hrtimer_run_queues(cpu_base, now);

	/* Reevaluate the clock bases for the next expiry */
	expires_next = __hrtimer_get_next_event(cpu_base);
	/*
	 * Store the new expiry value so the migration code can verify
	 * against it.
	 */
	cpu_base->expires_next = expires_next;
	cpu_base->in_hrtirq = 0;
	raw_spin_unlock(&cpu_base->lock);

	/* Reprogramming necessary ? */
	if (!tick_program_event(expires_next, 0)) {
		cpu_base->hang_detected = 0;
		return;
	}

	/*
	 * The next timer was already expired due to:
	 * - tracing
	 * - long lasting callbacks
	 * - being scheduled away when running in a VM
	 *
	 * We need to prevent that we loop forever in the hrtimer
	 * interrupt routine. We give it 3 attempts to avoid
	 * overreacting on some spurious event.
	 *
	 * Acquire base lock for updating the offsets and retrieving
	 * the current time.
	 */
	raw_spin_lock(&cpu_base->lock);
	now = hrtimer_update_base(cpu_base);
	cpu_base->nr_retries++;
	if (++retries < 3)
		goto retry;
	/*
	 * Give the system a chance to do something else than looping
	 * here. We stored the entry time, so we know exactly how long
	 * we spent here. We schedule the next event this amount of
	 * time away.
	 */
	cpu_base->nr_hangs++;
	cpu_base->hang_detected = 1;
	raw_spin_unlock(&cpu_base->lock);
	delta = ktime_sub(now, entry_time);
	if ((unsigned int)delta.tv64 > cpu_base->max_hang_time)
		cpu_base->max_hang_time = (unsigned int) delta.tv64;
	/*
	 * Limit it to a sensible value as we enforce a longer
	 * delay. Give the CPU at least 100ms to catch up.
	 */
	if (delta.tv64 > 100 * NSEC_PER_MSEC)
		expires_next = ktime_add_ns(now, 100 * NSEC_PER_MSEC);
	else
		expires_next = ktime_add(now, delta);
	tick_program_event(expires_next, 1);
	printk_once(KERN_WARNING "hrtimer: interrupt took %llu ns\n",
		    ktime_to_ns(delta));
}

//.........这里部分代码省略.........
		struct hrtimer_clock_base *base;
		struct timerqueue_node *node;
		ktime_t basenow;

		if (!(cpu_base->active_bases & (1 << i)))
			continue;

		base = cpu_base->clock_base + i;
		basenow = ktime_add(now, base->offset);

		while ((node = timerqueue_getnext(&base->active))) {
			struct hrtimer *timer;

			timer = container_of(node, struct hrtimer, node);

			/*
			 * The immediate goal for using the softexpires is
			 * minimizing wakeups, not running timers at the
			 * earliest interrupt after their soft expiration.
			 * This allows us to avoid using a Priority Search
			 * Tree, which can answer a stabbing querry for
			 * overlapping intervals and instead use the simple
			 * BST we already have.
			 * We don't add extra wakeups by delaying timers that
			 * are right-of a not yet expired timer, because that
			 * timer will have to trigger a wakeup anyway.
			 */

			if (basenow.tv64 < hrtimer_get_softexpires_tv64(timer)) {
				ktime_t expires;

				expires = ktime_sub(hrtimer_get_expires(timer),
						    base->offset);
				if (expires.tv64 < 0)
					expires.tv64 = KTIME_MAX;
				if (expires.tv64 < expires_next.tv64)
					expires_next = expires;
				break;
			}

			__run_hrtimer(timer, &basenow);
		}
	}

	/*
	 * Store the new expiry value so the migration code can verify
	 * against it.
	 */
	cpu_base->expires_next = expires_next;
	raw_spin_unlock(&cpu_base->lock);

	/* Reprogramming necessary ? */
	if (exp