• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号
登陆 注册

C++ pci_write_config32函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中pci_write_config32函数的典型用法代码示例。如果您正苦于以下问题：C++ pci_write_config32函数的具体用法？C++ pci_write_config32怎么用？C++ pci_write_config32使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了pci_write_config32函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: init_igd_opregion

/* Initialize IGD OpRegion, called from ACPI code */
int init_igd_opregion(igd_opregion_t *opregion)
{
	device_t igd;
	u16 reg16;

	memset((void *)opregion, 0, sizeof(igd_opregion_t));

	// FIXME if IGD is disabled, we should exit here.

	memcpy(&opregion->header.signature, IGD_OPREGION_SIGNATURE,
		sizeof(IGD_OPREGION_SIGNATURE));

	/* 8kb */
	opregion->header.size = sizeof(igd_opregion_t) / 1024;
	opregion->header.version = IGD_OPREGION_VERSION;

	// FIXME We just assume we're mobile for now
	opregion->header.mailboxes = MAILBOXES_MOBILE;

	// TODO Initialize Mailbox 1

	// TODO Initialize Mailbox 3
	opregion->mailbox3.bclp = IGD_BACKLIGHT_BRIGHTNESS;
	opregion->mailbox3.pfit = IGD_FIELD_VALID | IGD_PFIT_STRETCH;
	opregion->mailbox3.pcft = 0; // should be (IMON << 1) & 0x3e
	opregion->mailbox3.cblv = IGD_FIELD_VALID | IGD_INITIAL_BRIGHTNESS;
	opregion->mailbox3.bclm[0] = IGD_WORD_FIELD_VALID + 0x0000;
	opregion->mailbox3.bclm[1] = IGD_WORD_FIELD_VALID + 0x0a19;
	opregion->mailbox3.bclm[2] = IGD_WORD_FIELD_VALID + 0x1433;
	opregion->mailbox3.bclm[3] = IGD_WORD_FIELD_VALID + 0x1e4c;
	opregion->mailbox3.bclm[4] = IGD_WORD_FIELD_VALID + 0x2866;
	opregion->mailbox3.bclm[5] = IGD_WORD_FIELD_VALID + 0x327f;
	opregion->mailbox3.bclm[6] = IGD_WORD_FIELD_VALID + 0x3c99;
	opregion->mailbox3.bclm[7] = IGD_WORD_FIELD_VALID + 0x46b2;
	opregion->mailbox3.bclm[8] = IGD_WORD_FIELD_VALID + 0x50cc;
	opregion->mailbox3.bclm[9] = IGD_WORD_FIELD_VALID + 0x5ae5;
	opregion->mailbox3.bclm[10] = IGD_WORD_FIELD_VALID + 0x64ff;

	init_opregion_vbt(opregion);

	/* TODO This needs to happen in S3 resume, too.
	 * Maybe it should move to the finalize handler
	 */
	igd = dev_find_slot(0, PCI_DEVFN(0x2, 0));

	pci_write_config32(igd, ASLS, (u32)opregion);
	reg16 = pci_read_config16(igd, SWSCI);
	reg16 &= ~(1 << 0);
	reg16 |= (1 << 15);
	pci_write_config16(igd, SWSCI, reg16);

	/* clear dmisci status */
	reg16 = inw(DEFAULT_PMBASE + TCO1_STS);
	reg16 |= DMISCI_STS; // reference code does an &=
	outw(DEFAULT_PMBASE + TCO1_STS, reg16);

	/* clear acpi tco status */
	outl(DEFAULT_PMBASE + GPE0_STS, TCOSCI_STS);

	/* enable acpi tco scis */
	reg16 = inw(DEFAULT_PMBASE + GPE0_EN);
	reg16 |= TCOSCI_EN;
	outw(DEFAULT_PMBASE + GPE0_EN, reg16);

	return 0;
}
开发者ID:DarkDefender，项目名称:coreboot，代码行数:67，代码来源:acpi.c


示例2: sata_init


//.........这里部分代码省略.........
			reg8 = pci_read_config8(dev, 0x09);
			reg8 |= 0x5;
			pci_write_config8(dev, 0x09, reg8);
		}

		/* Set capabilities pointer */
		pci_write_config8(dev, 0x34, 0x70);
		reg16 = pci_read_config16(dev, 0x70);
		reg16 &= ~0xFF00;
		pci_write_config16(dev, 0x70, reg16);
	}

	/* Primary timing - decode enable */
	reg16 = pci_read_config16(dev, 0x40);
	reg16 |= 1 << 15;
	pci_write_config16(dev, 0x40, reg16);

	/* Secondary timing - decode enable */
	reg16 = pci_read_config16(dev, 0x42);
	reg16 |= 1 << 15;
	pci_write_config16(dev, 0x42, reg16);

	/* Port mapping enables */
	reg16 = pci_read_config16(dev, 0x90);
	reg16 |= (config->sata_port_map ^ 0x3) << 8;
	pci_write_config16(dev, 0x90, reg16);

	/* Port control enables */
	reg16 = pci_read_config16(dev, 0x92);
	reg16 &= ~0x003f;
	reg16 |= config->sata_port_map;
	pci_write_config16(dev, 0x92, reg16);

	if (config->sata_ahci) {
	  u8 *abar = (u8 *)pci_read_config32(dev, PCI_BASE_ADDRESS_5);

		/* Enable CR memory space decoding */
		reg16 = pci_read_config16(dev, 0x04);
		reg16 |= 0x2;
		pci_write_config16(dev, 0x04, reg16);

		/* Set capability register */
		reg32 = read32(abar + 0x00);
		reg32 |= 0x0c046000;  // set PSC+SSC+SALP+SSS+SAM
		reg32 &= ~0x00f20060; // clear SXS+EMS+PMS+gen bits
		reg32 |= (0x3 << 20); // Gen3 SATA
		write32(abar + 0x00, reg32);

		/* Ports enabled */
		reg32 = read32(abar + 0x0c);
		reg32 &= (u32)(~0x3f);
		reg32 |= config->sata_port_map;
		write32(abar + 0xc, reg32);
		/* Two extra reads to latch */
		read32(abar + 0x0c);
		read32(abar + 0x0c);

		/* Set cap2 - Support devslp */
		reg32 = (1 << 5) | (1 << 4) | (1 << 3);
		write32(abar + 0x24, reg32);

		/* Set PxCMD registers */
		reg32 = read32(abar + 0x118);
		reg32 &= ~((1 << 27) | (1 << 26) | (1 << 22) | (1 << 21) |
			(1 << 19) | (1 << 18) | (1 << 1));
		reg32 |= 2;
		write32(abar + 0x118, reg32);

		reg32 = read32(abar + 0x198);
		reg32 &= ~((1 << 27) | (1 << 26) | (1 << 22) | (1 << 21) |
			(1 << 19) | (1 << 18) | (1 << 1));
		reg32 |= 2;
		write32(abar + 0x198, reg32);

		/* Clear reset features */
		write32(abar + 0xc8, 0);

		/* Enable interrupts */
		reg8 = read8(abar + 0x04);
		reg8 |= 0x02;
		write8(abar + 0x04, reg8);

	} else {
		/* TODO(shawnn): Configure IDE SATA speed regs */
	}

	/* 1.4 us delay after configuring port / enable bits */
	udelay(2);

	/* Enable clock for ports */
	reg32 = pci_read_config32(dev, 0x94);
	reg32 |= 0x3f << 24;
	pci_write_config32(dev, 0x94, reg32);
	reg32 &= (config->sata_port_map ^ 0x3) << 24;
	pci_write_config32(dev, 0x94, reg32);

	/* Lock SataGc register */
	reg32 = (0x1 << 31) | (0x7 << 12);
	pci_write_config32(dev, 0x98, reg32);
}
开发者ID:tidatida，项目名称:coreboot，代码行数:101，代码来源:sata.c


示例3: sata_init

static void sata_init(struct device *dev)
{
	u32 dword;
	struct southbridge_nvidia_ck804_config *conf;

	conf = dev->chip_info;

	dword = pci_read_config32(dev, 0x50);
	/* Ensure prefetch is disabled. */
	dword &= ~((1 << 15) | (1 << 13));
	if (conf->sata1_enable) {
		/* Enable secondary SATA interface. */
		dword |= (1 << 0);
		printk(BIOS_DEBUG, "SATA S\t");
	}
	if (conf->sata0_enable) {
		/* Enable primary SATA interface. */
		dword |= (1 << 1);
		printk(BIOS_DEBUG, "SATA P\n");
	}
#if 0
	/* Write back */
	dword |= (1 << 12);
	dword |= (1 << 14);
#endif

#if 0
	/* ADMA */
	dword |= (1 << 16);
	dword |= (1 << 17);
#endif

#if 1
	/* DO NOT relay OK and PAGE_FRNDLY_DTXFR_CNT. */
	dword &= ~(0x1f << 24);
	dword |= (0x15 << 24);
#endif
	pci_write_config32(dev, 0x50, dword);

#if 0
	/* SLUMBER_DURING_D3 */
	dword = pci_read_config32(dev, 0x7c);
	dword &= ~(1 << 4);
	pci_write_config32(dev, 0x7c, dword);

	dword = pci_read_config32(dev, 0xd0);
	dword &= ~(0xff << 24);
	dword |= (0x68 << 24);
	pci_write_config32(dev, 0xd0, dword);

	dword = pci_read_config32(dev, 0xe0);
	dword &= ~(0xff << 24);
	dword |= (0x68 << 24);
	pci_write_config32(dev, 0xe0, dword);
#endif

	dword = pci_read_config32(dev, 0xf8);
	dword |= 2;
	pci_write_config32(dev, 0xf8, dword);

#if CK804_SATA_RESET_FOR_ATAPI
	dword = pci_read_config32(dev, 0xac);
	dword &= ~((1 << 13) | (1 << 14));
	dword |= (1 << 13) | (0 << 14);
	pci_write_config32(dev, 0xac, dword);

	sata_com_reset(dev, 1);	/* For discover some s-atapi device. */
#endif
}
开发者ID:af00，项目名称:coreboot，代码行数:69，代码来源:sata.c


示例4: sata_init

static void sata_init(struct device *dev)
{
	u8 byte;
	u16 word;
	u32 dword;
	void *sata_bar5;
	u16 sata_bar0, sata_bar1, sata_bar2, sata_bar3, sata_bar4;
	int i, j;

	struct southbridge_ati_sb600_config *conf;
	conf = dev->chip_info;

	device_t sm_dev;
	/* SATA SMBus Disable */
	/* sm_dev = pci_locate_device(PCI_ID(0x1002, 0x4385), 0); */
	sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0));
	/* Disable SATA SMBUS */
	byte = pci_read_config8(sm_dev, 0xad);
	byte |= (1 << 1);
	/* Enable SATA and power saving */
	byte = pci_read_config8(sm_dev, 0xad);
	byte |= (1 << 0);
	byte |= (1 << 5);
	pci_write_config8(sm_dev, 0xad, byte);
	/* Set the interrupt Mapping to INTG# */
	byte = pci_read_config8(sm_dev, 0xaf);
	byte = 0x6 << 2;
	pci_write_config8(sm_dev, 0xaf, byte);

	/* get base address */
	sata_bar5 = (void *)(pci_read_config32(dev, 0x24) & ~0x3FF);
	sata_bar0 = pci_read_config16(dev, 0x10) & ~0x7;
	sata_bar1 = pci_read_config16(dev, 0x14) & ~0x3;
	sata_bar2 = pci_read_config16(dev, 0x18) & ~0x7;
	sata_bar3 = pci_read_config16(dev, 0x1C) & ~0x3;
	sata_bar4 = pci_read_config16(dev, 0x20) & ~0xf;

	printk(BIOS_SPEW, "sata_bar0=%x\n", sata_bar0);	/* 3030 */
	printk(BIOS_SPEW, "sata_bar1=%x\n", sata_bar1);	/* 3070 */
	printk(BIOS_SPEW, "sata_bar2=%x\n", sata_bar2);	/* 3040 */
	printk(BIOS_SPEW, "sata_bar3=%x\n", sata_bar3);	/* 3080 */
	printk(BIOS_SPEW, "sata_bar4=%x\n", sata_bar4);	/* 3000 */
	printk(BIOS_SPEW, "sata_bar5=%p\n", sata_bar5);	/* e0309000 */

	/* SERR-Enable */
	word = pci_read_config16(dev, 0x04);
	word |= (1 << 8);
	pci_write_config16(dev, 0x04, word);

	/* Dynamic power saving */
	byte = pci_read_config8(dev, 0x40);
	byte |= (1 << 2);
	pci_write_config8(dev, 0x40, byte);

	/* Set SATA Operation Mode */
	byte = pci_read_config8(dev, 0x40);
	byte |= (1 << 0);
	byte |= (1 << 4);
	pci_write_config8(dev, 0x40, byte);

	// 1 means IDE, 0 means AHCI
	i = CONFIG_SATA_MODE;
	get_option(&i, "sata_mode");
	printk(BIOS_INFO, "%s: setting sata mode = %s\n", __func__, (i == SATA_MODE_IDE)?"ide":"ahci" );

	dword = pci_read_config32(dev, 0x8);
	dword &= 0xff0000ff;
	if (i == SATA_MODE_IDE)
		dword |= 0x00018f00; // IDE mode
	else
		dword |= 0x00060100; // AHCI mode
	pci_write_config32(dev, 0x8, dword);

	byte = pci_read_config8(dev, 0x40);
	byte &= ~(1 << 0);
	pci_write_config8(dev, 0x40, byte);

	/* Enable the SATA watchdog counter */
	byte = pci_read_config8(dev, 0x44);
	byte |= (1 << 0);
	pci_write_config8(dev, 0x44, byte);

	/* Program the watchdog counter to 0x10 */
	byte = 0x10;
	pci_write_config8(dev, 0x46, byte);

	/* RPR6.5 Program the PHY Global Control to 0x2C00 for A13 */
	word = 0x2c00;
	pci_write_config16(dev, 0x86, word);

	/* RPR6.5 Program the Phy Tuning4Ports */
	dword = 0x00B401D6;
	pci_write_config32(dev, 0x88, dword);
	pci_write_config32(dev, 0x8c, dword);
	pci_write_config32(dev, 0x90, dword);
	pci_write_config32(dev, 0x94, dword);

	byte = 0xB8;
	pci_write_config8(dev, 0xA5, byte);
	pci_write_config8(dev, 0xAD, byte);
//.........这里部分代码省略.........
开发者ID:RafaelRMachado，项目名称:Coreboot，代码行数:101，代码来源:sata.c


示例5: lpc_enable_childrens_resources

/**
 * @brief Enable resources for children devices
 *
 * @param dev the device whos children's resources are to be enabled
 *
 */
void lpc_enable_childrens_resources(device_t dev)
{
	struct bus *link;
	u32 reg, reg_x;
	int var_num = 0;
	u16 reg_var[3];

	printk(BIOS_DEBUG, "SB800 - Lpc.c - lpc_enable_childrens_resources - Start.\n");
	reg = pci_read_config32(dev, 0x44);
	reg_x = pci_read_config32(dev, 0x48);

	for (link = dev->link_list; link; link = link->next) {
		device_t child;
		for (child = link->children; child;
		     child = child->sibling) {
			if (child->enabled
			    && (child->path.type == DEVICE_PATH_PNP)) {
				struct resource *res;
				for (res = child->resource_list; res; res = res->next) {
					u32 base, end;	/*  don't need long long */
					if (!(res->flags & IORESOURCE_IO))
						continue;
					base = res->base;
					end = resource_end(res);
/*
					printk(BIOS_DEBUG, "sb800 lpc decode:%s, base=0x%08x, end=0x%08x\n",
					     dev_path(child), base, end);
*/
					switch (base) {
					case 0x60:	/*  KB */
					case 0x64:	/*  MS */
						reg |= (1 << 29);
						break;
					case 0x3f8:	/*  COM1 */
						reg |= (1 << 6);
						break;
					case 0x2f8:	/*  COM2 */
						reg |= (1 << 7);
						break;
					case 0x378:	/*  Parallal 1 */
						reg |= (1 << 0);
						break;
					case 0x3f0:	/*  FD0 */
						reg |= (1 << 26);
						break;
					case 0x220:	/*  Aduio 0 */
						reg |= (1 << 8);
						break;
					case 0x300:	/*  Midi 0 */
						reg |= (1 << 18);
						break;
					case 0x400:
						reg_x |= (1 << 16);
						break;
					case 0x480:
						reg_x |= (1 << 17);
						break;
					case 0x500:
						reg_x |= (1 << 18);
						break;
					case 0x580:
						reg_x |= (1 << 19);
						break;
					case 0x4700:
						reg_x |= (1 << 22);
						break;
					case 0xfd60:
						reg_x |= (1 << 23);
						break;
					default:
						if (var_num >= 3)
							continue;	/* only 3 var ; compact them ? */
						switch (var_num) {
						case 0:
							reg_x |= (1 << 2);
							break;
						case 1:
							reg_x |= (1 << 24);
							break;
						case 2:
							reg_x |= (1 << 25);
							break;
						}
						reg_var[var_num++] =
						    base & 0xffff;
					}
				}
			}
		}
	}
	pci_write_config32(dev, 0x44, reg);
	pci_write_config32(dev, 0x48, reg_x);
	/* Set WideIO for as many IOs found (fall through is on purpose) */
	switch (var_num) {
//.........这里部分代码省略.........
开发者ID:XVilka，项目名称:coreboot，代码行数:101，代码来源:lpc.c


示例6: mptable_init

static void *smp_write_config_table(void *v)
{
	struct mp_config_table *mc;
	struct mb_sysconf_t *m;
	unsigned sbdn;
	int i, j, bus_isa;

	mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);

	mptable_init(mc, LOCAL_APIC_ADDR);

	smp_write_processors(mc);

	sbdn = sysconf.sbdn;
	m = sysconf.mb;

	mptable_write_buses(mc, NULL, &bus_isa);

/*I/O APICs:	APIC ID	Version	State		Address*/
	{
		struct device *dev;
		struct resource *res;
		uint32_t dword;

		dev = dev_find_slot(m->bus_mcp55[0], PCI_DEVFN(sbdn+ 0x1,0));
		if (dev) {
			res = find_resource(dev, PCI_BASE_ADDRESS_1);
			if (res) {
				smp_write_ioapic(mc, m->apicid_mcp55, 0x11,
						 res2mmio(res, 0, 0));
			}

			dword = 0x00000ab5;
			pci_write_config32(dev, 0x7c, dword);

			dword = 0x5ab0a500;
			pci_write_config32(dev, 0x80, dword);

			dword = 0xa000000b;
			pci_write_config32(dev, 0x84, dword);

		}


	}

	mptable_add_isa_interrupts(mc, bus_isa, m->apicid_mcp55, 0);

		   /*I/O Ints:	Type	Polarity    Trigger			Bus ID	 IRQ	APIC ID	PIN# */
	smp_write_pci_intsrc(mc, mp_INT, m->bus_mcp55[0], sbdn + 1, 1, m->apicid_mcp55, 0x5);  /*  5 SMBus, OK */
	smp_write_pci_intsrc(mc, mp_INT, m->bus_mcp55[0], sbdn + 2, 0, m->apicid_mcp55, 0xb); /* 11 USB, OK */
	smp_write_pci_intsrc(mc, mp_INT, m->bus_mcp55[0], sbdn + 2, 1, m->apicid_mcp55, 0xa); /* 10 USB, OK */
	smp_write_pci_intsrc(mc, mp_INT, m->bus_mcp55[0], sbdn + 5, 0, m->apicid_mcp55, 0x5); /*  5  IDE, OK*/
	smp_write_pci_intsrc(mc, mp_INT, m->bus_mcp55[0], sbdn + 5, 1, m->apicid_mcp55, 0xa); /* 10 IDE, OK*/
	smp_write_pci_intsrc(mc, mp_INT, m->bus_mcp55[0], sbdn + 5, 2, m->apicid_mcp55, 0xa); /* 10 IDE, OK*/
	smp_write_pci_intsrc(mc, mp_INT, m->bus_mcp55[0], sbdn + 6, 1, m->apicid_mcp55, 0xa); /* 10 VGA, OK*/

	smp_write_pci_intsrc(mc, mp_INT, m->bus_8132_2, 3, 0, m->apicid_mcp55, 0x5); /* 5  eth0, OK*/
	smp_write_pci_intsrc(mc, mp_INT, m->bus_8132_2, 3, 1, m->apicid_mcp55, 0xb); /* 11 eth1, OK*/

	for(j = 7;j >= 2; j--) {
		if(!m->bus_mcp55[j]) continue;
		for(i = 0; i < 4; i++) {
			smp_write_pci_intsrc(mc, mp_INT, m->bus_mcp55[j], 0x00, i, m->apicid_mcp55, 0x10 + (2+j+i+4-sbdn%4)%4);
		}
	}

	for(j = 0; j < 1; j++)
		for(i = 0; i < 4; i++) {
			smp_write_pci_intsrc(mc, mp_INT, m->bus_mcp55[1], 0x04+j, i, m->apicid_mcp55, 0x10 + (2+i+j)%4);
		}

/*Local Ints:	Type	Polarity    Trigger	Bus ID	 IRQ	APIC ID	PIN#*/
	mptable_lintsrc(mc, bus_isa);
	/* There is no extension information... */

	/* Compute the checksums */
	return mptable_finalize(mc);
}
开发者ID:canistation，项目名称:coreboot，代码行数:79，代码来源:mptable.c


示例7: get_bus_conf

static void *smp_write_config_table(void *v)
{
	struct mp_config_table *mc;
	int bus_isa;
	unsigned sbdn;

	get_bus_conf();
	sbdn = sysconf.sbdn;

	mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);

	mptable_init(mc, LAPIC_ADDR);

	smp_write_processors(mc);
	mptable_write_buses(mc, NULL, &bus_isa);

/* I/O APICs:	APIC ID	Version	State		Address*/
	{
		device_t dev;
		struct resource *res;
		u32 dword;

		dev = dev_find_slot(bus_ck804[0], PCI_DEVFN(sbdn + 0x1, 0));
		if (dev) {
			res = find_resource(dev, PCI_BASE_ADDRESS_1);
			if (res) {
				smp_write_ioapic(mc, apicid_ck804, 0x11,
						 res->base);
			}

			/* Initialize interrupt mapping */

			/* copied from stock bios */
			/*0x01800500,0x1800d509,0x00520d08*/

			dword = 0x08d0d218;
			pci_write_config32(dev, 0x7c, dword);

			dword = 0x8d001509;
			pci_write_config32(dev, 0x80, dword);

			dword = 0x00010271;
			pci_write_config32(dev, 0x84, dword);

		}
	}

	/* Now, assemble the table. */
	mptable_add_isa_interrupts(mc, bus_isa, apicid_ck804, 0);

#define PCI_INT(bus, dev, fn, pin) \
	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, \
		bus_ck804[bus], (((dev)<<2)|(fn)), apicid_ck804, (pin))

#if 0
	// Onboard ck804 smbus
	PCI_INT(0, sbdn+1, 1, 10); /* (this seems odd, how to test?) */

#endif
	// Onboard ck804 USB
	PCI_INT(0, sbdn+2, 0, 23);
	PCI_INT(0, sbdn+2, 1, 23);

	// Onboard ck804 AC-97
	PCI_INT(0, sbdn+4, 0, 23);

	// Onboard ck804 SATA 0
	PCI_INT(0, sbdn+7, 0, 20);

	// Onboard ck804 SATA 1
	PCI_INT(0, sbdn+8, 0, 21);

	// Onboard ck804 NIC
	PCI_INT(0, sbdn+10, 0, 22);


	/* "AGR" slot */
	PCI_INT(1, 0, 0, 16);
	PCI_INT(1, 0, 1, 17);

	/* legacy PCI */
	PCI_INT(1, 7, 0, 17);
	PCI_INT(1, 7, 1, 18);
	PCI_INT(1, 7, 2, 19);
	PCI_INT(1, 7, 3, 16);

	PCI_INT(1, 8, 0, 18);
	PCI_INT(1, 8, 1, 19);
	PCI_INT(1, 8, 2, 16);
	PCI_INT(1, 8, 3, 17);

	PCI_INT(1, 9, 0, 19);
	PCI_INT(1, 9, 1, 16);
	PCI_INT(1, 9, 2, 17);
	PCI_INT(1, 9, 3, 18);


	/* PCI-E x1 port */
	PCI_INT(2, 0, 0, 19);
	/* XXX guesses */
//.........这里部分代码省略.........
开发者ID:XVilka，项目名称:coreboot，代码行数:101，代码来源:mptable.c


示例8: serialio_init

static void serialio_init(struct device *dev)
{
	struct southbridge_intel_lynxpoint_config *config = dev->chip_info;
	struct resource *bar0, *bar1;
	int sio_index = -1;
	u32 reg32;

	printk(BIOS_DEBUG, "Initializing Serial IO device\n");

	/* Ensure memory and bus master are enabled */
	reg32 = pci_read_config32(dev, PCI_COMMAND);
	reg32 |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
	pci_write_config32(dev, PCI_COMMAND, reg32);

	/* Find BAR0 and BAR1 */
	bar0 = find_resource(dev, PCI_BASE_ADDRESS_0);
	if (!bar0)
		return;
	bar1 = find_resource(dev, PCI_BASE_ADDRESS_1);
	if (!bar1)
		return;

	if (!config->sio_acpi_mode)
		serialio_enable_clock(bar0);

	switch (dev->path.pci.devfn) {
	case PCI_DEVFN(21, 0): /* SDMA */
		sio_index = SIO_ID_SDMA;
		serialio_init_once(config->sio_acpi_mode);
		serialio_d21_mode(sio_index, SIO_PIN_INTB,
				  config->sio_acpi_mode);
		break;
	case PCI_DEVFN(21, 1): /* I2C0 */
		sio_index = SIO_ID_I2C0;
		serialio_d21_ltr(bar0);
		serialio_i2c_voltage_sel(bar0, config->sio_i2c0_voltage);
		serialio_d21_mode(sio_index, SIO_PIN_INTC,
				  config->sio_acpi_mode);
		break;
	case PCI_DEVFN(21, 2): /* I2C1 */
		sio_index = SIO_ID_I2C1;
		serialio_d21_ltr(bar0);
		serialio_i2c_voltage_sel(bar0, config->sio_i2c1_voltage);
		serialio_d21_mode(sio_index, SIO_PIN_INTC,
				  config->sio_acpi_mode);
		break;
	case PCI_DEVFN(21, 3): /* SPI0 */
		sio_index = SIO_ID_SPI0;
		serialio_d21_ltr(bar0);
		serialio_d21_mode(sio_index, SIO_PIN_INTC,
				  config->sio_acpi_mode);
		break;
	case PCI_DEVFN(21, 4): /* SPI1 */
		sio_index = SIO_ID_SPI1;
		serialio_d21_ltr(bar0);
		serialio_d21_mode(sio_index, SIO_PIN_INTC,
				  config->sio_acpi_mode);
		break;
	case PCI_DEVFN(21, 5): /* UART0 */
		sio_index = SIO_ID_UART0;
		serialio_d21_ltr(bar0);
		serialio_d21_mode(sio_index, SIO_PIN_INTD,
				  config->sio_acpi_mode);
		break;
	case PCI_DEVFN(21, 6): /* UART1 */
		sio_index = SIO_ID_UART1;
		serialio_d21_ltr(bar0);
		serialio_d21_mode(sio_index, SIO_PIN_INTD,
				  config->sio_acpi_mode);
		break;
	case PCI_DEVFN(23, 0): /* SDIO */
		sio_index = SIO_ID_SDIO;
		serialio_d23_ltr(bar0);
		serialio_d23_mode(config->sio_acpi_mode);
		break;
	default:
		return;
	}

	if (config->sio_acpi_mode) {
		global_nvs_t *gnvs;

		/* Find ACPI NVS to update BARs */
		gnvs = (global_nvs_t *)cbmem_find(CBMEM_ID_ACPI_GNVS);
		if (!gnvs) {
			printk(BIOS_ERR, "Unable to locate Global NVS\n");
			return;
		}

		/* Save BAR0 and BAR1 to ACPI NVS */
		gnvs->s0b[sio_index] = (u32)bar0->base;
		gnvs->s1b[sio_index] = (u32)bar1->base;
	}
}
开发者ID:RafaelRMachado，项目名称:Coreboot，代码行数:94，代码来源:serialio.c


示例9: usb_xhci_init

static void usb_xhci_init(device_t dev)
{
	u32 reg32;
	u16 reg16;
	u32 mem_base = usb_xhci_mem_base(dev);
	config_t *config = dev->chip_info;

	/* D20:F0:74h[1:0] = 00b (set D0 state) */
	reg16 = pci_read_config16(dev, XHCI_PWR_CTL_STS);
	reg16 &= ~PWR_CTL_SET_MASK;
	reg16 |= PWR_CTL_SET_D0;
	pci_write_config16(dev, XHCI_PWR_CTL_STS, reg16);

	/* Enable clock gating first */
	usb_xhci_clock_gating(dev);

	reg32 = read32(mem_base + 0x8144);
	if (pch_is_lp()) {
		/* XHCIBAR + 8144h[8,7,6] = 111b */
		reg32 |= (1 << 8) | (1 << 7) | (1 << 6);
	} else {
		/* XHCIBAR + 8144h[8,7,6] = 100b */
		reg32 &= ~((1 << 7) | (1 << 6));
		reg32 |= (1 << 8);
	}
	write32(mem_base + 0x8144, reg32);

	if (pch_is_lp()) {
		/* XHCIBAR + 816Ch[19:0] = 000e0038h */
		reg32 = read32(mem_base + 0x816c);
		reg32 &= ~0x000fffff;
		reg32 |= 0x000e0038;
		write32(mem_base + 0x816c, reg32);

		/* D20:F0:B0h[17,14,13] = 100b */
		reg32 = pci_read_config32(dev, 0xb0);
		reg32 &= ~((1 << 14) | (1 << 13));
		reg32 |= (1 << 17);
		pci_write_config32(dev, 0xb0, reg32);
	}

	reg32 = pci_read_config32(dev, 0x50);
	if (pch_is_lp()) {
		/* D20:F0:50h[28:0] = 0FCE2E5Fh */
		reg32 &= ~0x1fffffff;
		reg32 |= 0x0fce2e5f;
	} else {
		/* D20:F0:50h[26:0] = 07886E9Fh */
		reg32 &= ~0x07ffffff;
		reg32 |= 0x07886e9f;
	}
	pci_write_config32(dev, 0x50, reg32);

	/* D20:F0:44h[31] = 1 (Access Control Bit) */
	reg32 = pci_read_config32(dev, 0x44);
	reg32 |= (1 << 31);
	pci_write_config32(dev, 0x44, reg32);

	/* D20:F0:40h[31,23] = 10b (OC Configuration Done) */
	reg32 = pci_read_config32(dev, 0x40);
	reg32 &= ~(1 << 23); /* unsupported request */
	reg32 |= (1 << 31);
	pci_write_config32(dev, 0x40, reg32);

#if CONFIG_HAVE_ACPI_RESUME
	if (acpi_slp_type == 3) {
		/* Reset ports that are disabled or
		 * polling before returning to the OS. */
		usb_xhci_reset_usb3(dev, 0);
	} else
#endif
	/* Route all ports to XHCI */
	if (config->xhci_default)
		outb(0xca, 0xb2);
}
开发者ID:kleopatra999，项目名称:coreboot，代码行数:75，代码来源:usb_xhci.c


示例10: pci_init

static void pci_init(struct device *dev)
{
	u16 reg16;
	u32 reg32;

	printk(BIOS_DEBUG, "Initializing ICH9 PCIe root port.\n");

	/* Enable Bus Master */
	reg32 = pci_read_config32(dev, PCI_COMMAND);
	reg32 |= PCI_COMMAND_MASTER;
	pci_write_config32(dev, PCI_COMMAND, reg32);

	/* Set Cache Line Size to 0x10 */
	// This has no effect but the OS might expect it
	pci_write_config8(dev, 0x0c, 0x10);

	reg16 = pci_read_config16(dev, 0x3e);
	reg16 &= ~(1 << 0); /* disable parity error response */
	reg16 |= (1 << 2); /* ISA enable */
	pci_write_config16(dev, 0x3e, reg16);

	/* Enable IO xAPIC on this PCIe port */
	reg32 = pci_read_config32(dev, 0xd8);
	reg32 |= (1 << 7);
	pci_write_config32(dev, 0xd8, reg32);

	/* Enable Backbone Clock Gating */
	reg32 = pci_read_config32(dev, 0xe1);
	reg32 |= (1 << 3) | (1 << 2) | (1 << 1) | (1 << 0);
	pci_write_config32(dev, 0xe1, reg32);

	/* Set VC0 transaction class */
	reg32 = pci_read_config32(dev, 0x114);
	reg32 &= 0xffffff00;
	reg32 |= 1;
	pci_write_config32(dev, 0x114, reg32);

	/* Mask completion timeouts */
	reg32 = pci_read_config32(dev, 0x148);
	reg32 |= (1 << 14);
	pci_write_config32(dev, 0x148, reg32);

	/* Lock R/WO Correctable Error Mask. */
	pci_write_config32(dev, 0x154, pci_read_config32(dev, 0x154));

	/* Clear errors in status registers */
	reg16 = pci_read_config16(dev, 0x06);
	pci_write_config16(dev, 0x06, reg16);
	reg16 = pci_read_config16(dev, 0x1e);
	pci_write_config16(dev, 0x1e, reg16);

	/* Get configured ASPM state */
	const enum aspm_type apmc = pci_read_config32(dev, 0x50) & 3;

	/* If both L0s and L1 enabled then set root port 0xE8[1]=1 */
	if (apmc == PCIE_ASPM_BOTH) {
		reg32 = pci_read_config32(dev, 0xe8);
		reg32 |= (1 << 1);
		pci_write_config32(dev, 0xe8, reg32);
	}
}
开发者ID:DarkDefender，项目名称:coreboot，代码行数:61，代码来源:pcie.c


示例11: gpio_init

static void gpio_init(device_t dev)
{
	pci_write_config32(dev, GPIO_BASE, (GPIO_BASE_ADDR | 1));
	pci_write_config8(dev, GPIO_CNTL, GPIO_EN);
}
开发者ID:kmalkki，项目名称:coreboot，代码行数:5，代码来源:lpc.c


示例12: pch_pcie_pm_early

static void pch_pcie_pm_early(struct device *dev)
{
	u16 link_width_p0, link_width_p4;
	u8 slot_power_limit = 10; /* 10W for x1 */
	u32 reg32;
	u8 reg8;

	reg32 = RCBA32(RPC);

	/* Port 0-3 link aggregation from PCIEPCS1[1:0] soft strap */
	switch (reg32 & 3) {
	case 3:
		link_width_p0 = 4;
		break;
	case 1:
	case 2:
		link_width_p0 = 2;
		break;
	case 0:
	default:
		link_width_p0 = 1;
	}

	/* Port 4-7 link aggregation from PCIEPCS2[1:0] soft strap */
	switch ((reg32 >> 2) & 3) {
	case 3:
		link_width_p4 = 4;
		break;
	case 1:
	case 2:
		link_width_p4 = 2;
		break;
	case 0:
	default:
		link_width_p4 = 1;
	}

	/* Enable dynamic clock gating where needed */
	reg8 = pci_read_config8(dev, 0xe1);
	switch (PCI_FUNC(dev->path.pci.devfn)) {
	case 0: /* Port 0 */
		if (link_width_p0 == 4)
			slot_power_limit = 40; /* 40W for x4 */
		else if (link_width_p0 == 2)
			slot_power_limit = 20; /* 20W for x2 */
		reg8 |= 0x3f;
		break;
	case 4: /* Port 4 */
		if (link_width_p4 == 4)
			slot_power_limit = 40; /* 40W for x4 */
		else if (link_width_p4 == 2)
			slot_power_limit = 20; /* 20W for x2 */
		reg8 |= 0x3f;
		break;
	case 1: /* Port 1 only if Port 0 is x1 */
		if (link_width_p0 == 1)
			reg8 |= 0x3;
		break;
	case 2: /* Port 2 only if Port 0 is x1 or x2 */
	case 3: /* Port 3 only if Port 0 is x1 or x2 */
		if (link_width_p0 <= 2)
			reg8 |= 0x3;
		break;
	case 5: /* Port 5 only if Port 4 is x1 */
		if (link_width_p4 == 1)
			reg8 |= 0x3;
		break;
	case 6: /* Port 7 only if Port 4 is x1 or x2 */
	case 7: /* Port 7 only if Port 4 is x1 or x2 */
		if (link_width_p4 <= 2)
			reg8 |= 0x3;
		break;
	}
	pci_write_config8(dev, 0xe1, reg8);

	/* Set 0xE8[0] = 1 */
	reg32 = pci_read_config32(dev, 0xe8);
	reg32 |= 1;
	pci_write_config32(dev, 0xe8, reg32);

	/* Adjust Common Clock exit latency */
	reg32 = pci_read_config32(dev, 0xd8);
	reg32 &= ~(1 << 17);
	reg32 |= (1 << 16) | (1 << 15);
	reg32 &= ~(1 << 31); /* Disable PME# SCI for native PME handling */
	pci_write_config32(dev, 0xd8, reg32);

	/* Adjust ASPM L1 exit latency */
	reg32 = pci_read_config32(dev, 0x4c);
	reg32 &= ~((1 << 17) | (1 << 16) | (1 << 15));
	if (RCBA32(0x2320) & (1 << 16)) {
		/* If RCBA+2320[15]=1 set ASPM L1 to 8-16us */
		reg32 |= (1 << 17);
	} else {
		/* Else set ASPM L1 to 2-4us */
		reg32 |= (1 << 16);
	}
	pci_write_config32(dev, 0x4c, reg32);

	/* Set slot power limit as configured above */
//.........这里部分代码省略.........
开发者ID:RafaelRMachado，项目名称:Coreboot，代码行数:101，代码来源:pcie.c


示例13: pch_pcie_pm_late

static void pch_pcie_pm_late(struct device *dev)
{
	struct southbridge_intel_bd82x6x_config *config = dev->chip_info;
	enum aspm_type apmc = 0;
	u32 reg32;

	/* Set 0x314 = 0x743a361b */
	pci_write_config32(dev, 0x314, 0x743a361b);

	/* Set 0x318[31:16] = 0x1414 */
	reg32 = pci_read_config32(dev, 0x318);
	reg32 &= 0x0000ffff;
	reg32 |= 0x14140000;
	pci_write_config32(dev, 0x318, reg32);

	/* Set 0x324[5] = 1 */
	reg32 = pci_read_config32(dev, 0x324);
	reg32 |= (1 << 5);
	pci_write_config32(dev, 0x324, reg32);

	/* Set 0x330[7:0] = 0x40 */
	reg32 = pci_read_config32(dev, 0x330);
	reg32 &= ~(0xff);
	reg32 |= 0x40;
	pci_write_config32(dev, 0x330, reg32);

	/* Set 0x33C[24:0] = 0x854c74 */
	reg32 = pci_read_config32(dev, 0x33c);
	reg32 &= 0xff000000;
	reg32 |= 0x00854c74;
	pci_write_config32(dev, 0x33c, reg32);

	/* No IO-APIC, Disable EOI forwarding */
	reg32 = pci_read_config32(dev, 0xd4);
	reg32 |= (1 << 1);
	pci_write_config32(dev, 0xd4, reg32);

	/* Check for a rootport ASPM override */
	switch (PCI_FUNC(dev->path.pci.devfn)) {
	case 0:
		apmc = config->pcie_aspm_f0;
		break;
	case 1:
		apmc = config->pcie_aspm_f1;
		break;
	case 2:
		apmc = config->pcie_aspm_f2;
		break;
	case 3:
		apmc = config->pcie_aspm_f3;
		break;
	case 4:
		apmc = config->pcie_aspm_f4;
		break;
	case 5:
		apmc = config->pcie_aspm_f5;
		break;
	case 6:
		apmc = config->pcie_aspm_f6;
		break;
	case 7:
		apmc = config->pcie_aspm_f7;
		break;
	}

	/* Setup the override or get the real ASPM setting */
	if (apmc) {
		reg32 = pci_read_config32(dev, 0xd4);
		reg32 |= (apmc << 2) | (1 << 4);
		pci_write_config32(dev, 0xd4, reg32);
	} else {
		apmc = pci_read_config32(dev, 0x50) & 3;
	}

	/* If both L0s and L1 enabled then set root port 0xE8[1]=1 */
	if (apmc == PCIE_ASPM_BOTH) {
		reg32 = pci_read_config32(dev, 0xe8);
		reg32 |= (1 << 1);
		pci_write_config32(dev, 0xe8, reg32);
	}
}
开发者ID:RafaelRMachado，项目名称:Coreboot，代码行数:81，代码来源:pcie.c


示例14: pci_init

static void pci_init(struct device *dev)
{
	u16 reg16;
	u32 reg32;

	printk(BIOS_DEBUG, "Initializing ICH7 PCIe bridge.\n");

	/* Enable Bus Master */
	reg32 = pci_read_config32(dev, PCI_COMMAND);
	reg32 |= PCI_COMMAND_MASTER;
	pci_write_config32(dev, PCI_COMMAND, reg32);

	/* Set Cache Line Size to 0x10 */
	// This has no effect but the OS might expect it
	pci_write_config8(dev, 0x0c, 0x10);

	reg16 = pci_read_config16(dev, 0x3e);
	reg16 &= ~(1 << 0); /* disable parity error response */
	// reg16 &= ~(1 << 1); /* disable SERR */
	reg16 |= (1 << 2); /* ISA enable */
	pci_write_config16(dev, 0x3e, reg16);

	/* Enable IO xAPIC on this PCIe port */
	reg32 = pci_read_config32(dev, 0xd8);
	reg32 |= (1 << 7);
	pci_write_config32(dev, 0xd8, reg32);

	/* Enable Backbone Clock Gating */
	reg32 = pci_read_config32(dev, 0xe1);
	reg32 |= (1 << 3) | (1 << 2) | (1 << 1) | (1 << 0);
	pci_write_config32(dev, 0xe1, reg32);

#if CONFIG_MMCONF_SUPPORT
	/* Set VC0 transaction class */
	reg32 = pci_mmio_read_config32(dev, 0x114);
	reg32 &= 0xffffff00;
	reg32 |= 1;
	pci_mmio_write_config32(dev, 0x114, reg32);

	/* Mask completion timeouts */
	reg32 = pci_mmio_read_config32(dev, 0x148);
	reg32 |= (1 << 14);
	pci_mmio_write_config32(dev, 0x148, reg32);
#else
#error "MMIO needed for ICH7 PCIe"
#endif
	/* Enable common clock configuration */
	// Are there cases when we don't want that?
	reg16 = pci_read_config16(dev, 0x50);
	reg16 |= (1 << 6);
	pci_write_config16(dev, 0x50, reg16);

#ifdef EVEN_MORE_DEBUG
	reg32 = pci_read_config32(dev, 0x20);
	printk(BIOS_SPEW, "    MBL    = 0x%08x\n", reg32);
	reg32 = pci_read_config32(dev, 0x24);
	printk(BIOS_SPEW, "    PMBL   = 0x%08x\n", reg32);
	reg32 = pci_read_config32(dev, 0x28);
	printk(BIOS_SPEW, "    PMBU32 = 0x%08x\n", reg32);
	reg32 = pci_read_config32(dev, 0x2c);
	printk(BIOS_SPEW, "    PMLU32 = 0x%08x\n", reg32);
#endif

	/* Clear errors in status registers */
	reg16 = pci_read_config16(dev, 0x06);
	//reg16 |= 0xf900;
	pci_write_config16(dev, 0x06, reg16);

	reg16 = pci_read_config16(dev, 0x1e);
	//reg16 |= 0xf900;
	pci_write_config16(dev, 0x1e, reg16);
}
开发者ID:andy737，项目名称:firebrickRemote，代码行数:72，代码来源:pcie.c


示例15: mptable_init

static void *smp_write_config_table(void *v)
{
	struct mp_config_table *mc;
	u32 apicid_sp5100;
	u32 apicid_sr5650;
	device_t dev;
	u32 dword;

	mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);
	mptable_init(mc, LOCAL_APIC_ADDR);

	smp_write_processors(mc);
	get_bus_conf();
	mptable_write_buses(mc, NULL, &bus_isa);

	/*
	 * AGESA v5 Apply apic enumeration rules
	 * For systems with >= 16 APICs, put the IO-APICs at 0..n and
	 * put the local-APICs at m..z
	 * For systems with < 16 APICs, put the Local-APICs at 0..n and
	 * put the IO-APICs at (n + 1)..z
	 */
#if CONFIG_MAX_CPUS >= 16
	apicid_sp5100 = 0x0;
#else
	apicid_sp5100 = CONFIG_MAX_CPUS + 1
#endif
	apicid_sr5650 = apicid_sp5100 + 1;

	dev = dev_find_slot(0, PCI_DEVFN(sbdn_sp5100 + 0x14, 0));
	if (dev) {
		/* Set SP5100 IOAPIC ID */
		dword = pci_read_config32(dev, 0x74) & 0xfffffff0;
		smp_write_ioapic(mc, apicid_sp5100, 0x20, dword);

#ifdef UNUSED_CODE
		u8 byte;
		/* Initialize interrupt mapping */
		/* aza */
		byte = pci_read_config8(dev, 0x63);
		byte &= 0xf8;
		byte |= 0; /* 0: INTA, ...., 7: INTH */
		pci_write_config8(dev, 0x63, byte);
		/* SATA */
		dword = pci_read_config32(dev, 0xAC);
		dword &= ~(7 << 26);
		dword |= 6 << 26; /* 0: INTA, ...., 7: INTH */
		/* dword |= 1<<22; PIC and APIC co exists */
		pci_write_config32(dev, 0xAC, dword);
#endif

		/*
		 * 00:12.0: PROG SATA : INT F
		 * 00:13.0: INTA USB_0
		 * 00:13.1: INTB USB_1
		 * 00:13.2: INTC USB_2
		 * 00:13.3: INTD USB_3
		 * 00:13.4: INTC USB_4
		 * 00:13.5: INTD USB2
		 * 00:14.1: INTA IDE
		 * 00:14.2: Prog HDA : INT E
		 * 00:14.5: INTB ACI
		 * 00:14.6: INTB MCI
		 */

		/* Set RS5650 IOAPIC ID */
		dev = dev_find_slot(0, PCI_DEVFN(0, 0));
		if (dev) {
			pci_write_config32(dev, 0xF8, 0x1);
			dword = pci_read_config32(dev, 0xFC) & 0xfffffff0;
			smp_write_ioapic(mc, apicid_sr5650, 0x20, dword);
		}

	}

	/* I/O Ints:    Type    Polarity    Trigger     Bus ID   IRQ    APIC ID PIN# */
#define IO_LOCAL_INT(type, intr, apicid, pin) \
	smp_write_lintsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, (intr), (apicid), (pin));

	mptable_add_isa_interrupts(mc, bus_isa, apicid_sp5100, 0);

	/* PCI interrupts are level triggered, and are
	 * associated with a specific bus/device/function tuple.
	 */
#define PCI_INT(bus, dev, int_sign, pin) \
	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, (bus), (((dev)<<2)|(int_sign)), apicid_sp5100, (pin))

	/* SMBUS */
	//PCI_INT(0x0, 0x14, 0x0, 0x10); //not generate interrupt, 3Ch hardcoded to 0

	/* HD Audio */
	PCI_INT(0x0, 0x14, 0x2, 0x10);

	/* USB */
	/* OHCI0, OHCI1 hard-wired to 01h, corresponding to using INTA# */
	/* EHCI hard-wired to 02h, corresponding to using INTB# */
	/* USB1 */
	PCI_INT(0x0, 0x12, 0x0, 0x10); /* OHCI0 Port 0~2 */
	PCI_INT(0x0, 0x12, 0x1, 0x10); /* OHCI1 Port 3~5 */
	PCI_INT(0x0, 0x12, 0x2, 0x11); /* EHCI Port 0~5 */
//.........这里部分代码省略.........
开发者ID:andy737，项目名称:firebrickRemote，代码行数:101，代码来源:mptable.c


示例16: main

void main(unsigned long bist)
{
	int s3resume = 0;
	int dock_err;
	const u8 spd_addrmap[2 * DIMM_SOCKETS] = { 0x50, 0x52, 0x51, 0x53 };


	timestamp_init(get_initial_timestamp());
	timestamp_add_now(TS_START_ROMSTAGE);

	if (bist == 0)
		enable_lapic();

	/* Force PCIRST# */
	pci_write_config16(PCI_DEV(0, 0x1e, 0), BCTRL, SBR);
	udelay(200 * 1000);
	pci_write_config16(PCI_DEV(0, 0x1e, 0), BCTRL, 0);

	ich7_enable_lpc();

	/* We want early GPIO setup, to be able to detect legacy I/O module */
	pci_write_config32(PCI_DEV(0, 0x1f, 0), GPIOBASE, DEFAULT_GPIOBASE | 1);
	/* Enable GPIOs */
	pci_write_config8(PCI_DEV(0, 0x1f, 0), 0x4c /* GC */ , 0x10);
	setup_ich7_gpios();

	dock_err = dlpc_init();

	/* We prefer Legacy I/O module over docking */
	if (legacy_io_present()) {
		legacy_io_init();
		early_superio_config();
	} else if (!dock_err && dock_present()) {
		dock_connect();
		early_superio_config();
	}

	/* Setup the console */
	console_init();

	/* Halt if there was a built in self test failure */
	report_bist_failure(bist);

	if (MCHBAR16(SSKPD) == 0xCAFE) {
		printk(BIOS_DEBUG, "soft reset detected, rebooting properly\n");
		outb(0x6, 0xcf9);
		halt();
	}

	/* Perform some early chipset initialization required
	 * before RAM initialization can work
	 */
	i945_early_initialization();

	s3resume = southbridge_detect_s3_resume();

	/* Enable SPD ROMs and DDR-II DRAM */
	enable_smbus();

#if CONFIG_DEFAULT_CONSOLE_LOGLEVEL > 8
	dump_spd_registers();
#endif

	timestamp_add_now(TS_BEFORE_INITRAM);
	sdram_initialize(s3resume ? 2 : 0, spd_addrmap);
	timestamp_add_now(TS_AFTER_INITRAM);

	/* Perform some initialization that must run before stage2 */
	early_ich7_init();

	/* This should probably go away. Until now it is required
	 * and mainboard specific
	 */
	rcba_config();

	/* Chipset Errata! */
	fixup_i945_errata();

	/* Initialize the internal PCIe links before we go into stage2 */
	i945_late_initialization(s3resume);

	timestamp_add_now(TS_END_ROMSTAGE);
}
开发者ID:tidatida，项目名称:coreboot，代码行数:83，代码来源:romstage.c


示例17: map_rcba

static void map_rcba(void)
{
	pci_write_config32(PCH_DEV_LPC, RCBA, RCBA_BASE_ADDRESS | 1);
}
开发者ID:kmalkki，项目名称:coreboot，代码行数:4，代码来源:pch.c


示例18: azalia_init

static void azalia_init(struct device *dev)
{
	u32 base;
	struct resource *res;
	u32 codec_mask;
	u8 reg8;
	u16 reg16;
	u32 reg32;

	/* Find base address */
	res = find_resource(dev, PCI_BASE_ADDRESS_0);
	if (!res)
		return;

	// NOTE this will break as soon as the Azalia get's a bar above
	// 4G. Is there anything we can do about it?
	base = (u32)res->base;
	printk(BIOS_DEBUG, "Azalia: base = %08x\n", (u32)base);

	if (RCBA32(0x2030) & (1 << 31)) {
		reg32 = pci_read_config32(dev, 0x120);
		reg32 &= 0xf8ffff01;
		reg32 |= (1 << 24); // 2 << 24 for server
		reg32 |= RCBA32(0x2030) & 0xfe;
		pci_write_config32(dev, 0x120, reg32);

		reg16 = pci_read_config16(dev, 0x78);
		reg16 |= (1 << 11);
		pci_write_config16(dev, 0x78, reg16);
	} else
		printk(BIOS_DEBUG, "Azalia: V1CTL disabled.\n");

	reg32 = pci_read_config32(dev, 0x114);
	reg32 &= ~0xfe;
	pci_write_config32(dev, 0x114, reg32);

	// Set VCi enable bit
	reg32 = pci_read_config32(dev, 0x120);
	reg32 |= (1 << 31);
	pci_write_config32(dev, 0x120, reg32);

	// Enable HDMI codec:
	reg32 = pci_read_config32(dev, 0xc4);
	reg32 |= (1 << 1);
	pci_write_config32(dev, 0xc4, reg32);

	reg8 = pci_read_config8(dev, 0x43);
	reg8 |= (1 << 6);
	pci_write_config8(dev, 0x43, reg8);

	/* Additional programming steps */
	reg32 = pci_read_config32(dev, 0xc4);
	reg32 |= (1 << 13);
	pci_write_config32(dev, 0xc4, reg32);

	reg32 = pci_read_config32(dev, 0xc4);
	reg32 |= (1 << 10);
	pci_write_config32(dev, 0xc4, reg32);

	reg32 = pci_read_config32(dev, 0xd0);
	reg32 &= ~(1 << 31);
	pci_write_config32(dev, 0xd0, reg32);

	if (dev->device == 0x1e20) {
		/* Additional step on Panther Point */
		reg32 = pci_read_config32(dev, 0xc4);
		reg32 |= (1 << 17);
		pci_write_config32(dev, 0xc4, reg32);
	}

	/* Set Bus Master */
	reg32 = pci_read_config32(dev, PCI_COMMAND);
	pci_write_config32(dev, PCI_COMMAND, reg32 | PCI_COMMAND_MASTER);

	pci_write_config8(dev, 0x3c, 0x0a); // unused?

	/* Codec Initialization Programming Sequence */

	/* Take controller out of reset */
	reg32 = read32(base + 0x08);
	reg32 |= (1 << 0);
	write32(base + 0x08, reg32);
	/* Wait 1ms */
	udelay(1000);

	//
	reg8 = pci_read_config8(dev, 0x40); // Audio Control
	reg8 |= 1; // Select Azalia mode. This needs to be controlled via devicetree.cb
	pci_write_config8(dev, 0x40, reg8);

	reg8 = pci_read_config8(dev, 0x4d); // Docking Status
	reg8 &= ~(1 << 7); // Docking not supported
	pci_write_config8(dev, 0x4d, reg8);

	codec_mask = codec_detect(base);

	if (codec_mask) {
		printk(BIOS_DEBUG, "Azalia: codec_mask = %02x\n", codec_mask);
		codecs_init(dev, base, codec_mask);
	}
//.........这里部分代码省略.........
开发者ID:0ida，项目名称:coreboot，代码行数:101，代码来源:azalia.c


示例19: main


鲜花
握手
雷人
路过
鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
More+
上一篇：
C++ pci_write_config8函数代码示例发布时间：2022-05-30
下一篇：
C++ pci_write_config16函数代码示例发布时间：2022-05-30
热门推荐
More+
热门话题
More+
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服（服务时间 9:00～18:00）

在线QQ客服
地址：深圳市南山区西丽大学城创智工业园
电邮：jeky_zhao#qq.com
移动电话：139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap