本文整理汇总了C++中pci_request_region函数的典型用法代码示例。如果您正苦于以下问题:C++ pci_request_region函数的具体用法?C++ pci_request_region怎么用?C++ pci_request_region使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了pci_request_region函数的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: cxl_map_adapter_regs
static int cxl_map_adapter_regs(struct cxl *adapter, struct pci_dev *dev)
{
if (pci_request_region(dev, 2, "priv 2 regs"))
goto err1;
if (pci_request_region(dev, 0, "priv 1 regs"))
goto err2;
pr_devel("cxl_map_adapter_regs: p1: %#.16llx %#llx, p2: %#.16llx %#llx",
p1_base(dev), p1_size(dev), p2_base(dev), p2_size(dev));
if (!(adapter->p1_mmio = ioremap(p1_base(dev), p1_size(dev))))
goto err3;
if (!(adapter->p2_mmio = ioremap(p2_base(dev), p2_size(dev))))
goto err4;
return 0;
err4:
iounmap(adapter->p1_mmio);
adapter->p1_mmio = NULL;
err3:
pci_release_region(dev, 0);
err2:
pci_release_region(dev, 2);
err1:
return -ENOMEM;
}
开发者ID:greguu,项目名称:linux-4.2.3-c3x00,代码行数:28,代码来源:pci.c
示例2: bcwc_pci_reserve_mem
static int bcwc_pci_reserve_mem(struct bcwc_private *dev_priv)
{
unsigned long start;
unsigned long len;
int ret;
/* Reserve resources */
ret = pci_request_region(dev_priv->pdev, BCWC_PCI_S2_IO, "S2 IO");
if (ret) {
dev_err(&dev_priv->pdev->dev, "Failed to request S2 IO\n");
return ret;
}
ret = pci_request_region(dev_priv->pdev, BCWC_PCI_S2_MEM, "S2 MEM");
if (ret) {
dev_err(&dev_priv->pdev->dev, "Failed to request S2 MEM\n");
return ret;
}
ret = pci_request_region(dev_priv->pdev, BCWC_PCI_ISP_IO, "ISP IO");
if (ret) {
dev_err(&dev_priv->pdev->dev, "Failed to request ISP IO\n");
return ret;
}
/* S2 IO */
start = pci_resource_start(dev_priv->pdev, BCWC_PCI_S2_IO);
len = pci_resource_len(dev_priv->pdev, BCWC_PCI_S2_IO);
dev_priv->s2_io = ioremap_nocache(start, len);
dev_priv->s2_io_len = len;
/* S2 MEM */
start = pci_resource_start(dev_priv->pdev, BCWC_PCI_S2_MEM);
len = pci_resource_len(dev_priv->pdev, BCWC_PCI_S2_MEM);
dev_priv->s2_mem = ioremap_nocache(start, len);
dev_priv->s2_mem_len = len;
/* ISP IO */
start = pci_resource_start(dev_priv->pdev, BCWC_PCI_ISP_IO);
len = pci_resource_len(dev_priv->pdev, BCWC_PCI_ISP_IO);
dev_priv->isp_io = ioremap_nocache(start, len);
dev_priv->isp_io_len = len;
dev_info(&dev_priv->pdev->dev,
"Allocated S2 regs (BAR %d). %u bytes at 0x%p",
BCWC_PCI_S2_IO, dev_priv->s2_io_len, dev_priv->s2_io);
dev_info(&dev_priv->pdev->dev,
"Allocated S2 mem (BAR %d). %u bytes at 0x%p",
BCWC_PCI_S2_MEM, dev_priv->s2_mem_len, dev_priv->s2_mem);
dev_info(&dev_priv->pdev->dev,
"Allocated ISP regs (BAR %d). %u bytes at 0x%p",
BCWC_PCI_ISP_IO, dev_priv->isp_io_len, dev_priv->isp_io);
pci_set_master(dev_priv->pdev);
return 0;
}
开发者ID:ddcc,项目名称:bcwc_pcie,代码行数:59,代码来源:bcwc_drv.c
示例3: my_probe
int my_probe(struct pci_dev *pdev, const struct pci_device_id *id)
{
printk(KERN_INFO "probe: bus->number: %2.x driver_data: %lu pci_slot: %x pci_func: %x\n", pdev->bus->number, id->driver_data,
PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn));
int en = pci_enable_device(pdev);
if (en < 0) {
return en;
}
int req_reg = pci_request_region(pdev, 0, "res0");
if (req_reg < 0) {
return req_reg;
}
void* mem = pci_ioremap_bar(pdev, 0);
pci_set_drvdata(pdev, mem);
u32 bridge_id = readl(mem);
u32 bridge_build = readl(mem + 0x0004);
printk(KERN_INFO "id: %4x build %4x\n", bridge_id, bridge_build);
int rok = 2000 + ((bridge_build & 0xf0000000) >> 28);
int mesic = (bridge_build & 0x0f000000) >> 24;
int den = (bridge_build & 0x00ff0000) >> 16;
int hodina = (bridge_build & 0x0000ff00) >> 8;
int minuta = (bridge_build & 0x000000ff) >> 0;
printk(KERN_INFO "vyrobeno: rok: %i mesic: %i den: %i hodina: %i minuta %i\n", rok, mesic, den, hodina, minuta);
printk(KERN_INFO "vyrobeno: %i.%i.%i %i:%i\n", den, mesic, rok, hodina, minuta);
return 0;
}
开发者ID:SovakPaleny,项目名称:pb173,代码行数:32,代码来源:pb173.c
示例4: map_bars
/**
* map_bars - Resource allocation for device I/O Memory and I/O Port.
* Maps physical address of PCI buffer to virtual kernel space.
*
* @param l_head: List that will hold mapped BARs
* @param pdev: Pci device description
* @param bars: Bitmask of BARs to be requested
* @param name: Desired memory region name suffix(or NULL if none)
*
* @note Linked list should be freed afterwards by unmap_bars!
*
* @return how many BARs were mapped - in case of success.
* @return -EBUSY - in case of failure.
*/
int map_bars(struct list_head *l_head, struct pci_dev *pdev, int bars, char *name)
{
char res_name[32] = "BAR";
bar_map_t *mem = NULL;
bar_map_t *memP, *tmpP;
int i, bcntr = 0;
void __iomem *ioaddr;
INIT_LIST_HEAD(l_head);
for (i = 0; i < 6; i++)
if ( (bars & (1 << i)) && (pci_resource_len(pdev, i)) ) {
memset(&res_name[3], 0, sizeof(res_name)-3);
snprintf(&res_name[3], sizeof(res_name)-3, "%d_%s", i, (name)?:'\0');
if (pci_request_region(pdev, i, res_name))
goto err_out;
/* we will treat I/O ports as if they were I/O memory */
if ( !(ioaddr = pci_iomap(pdev, i, 0)) )
goto err_out_iomap;
if ( !(mem = kzalloc((sizeof *mem), GFP_KERNEL)) )
goto err_out_alloc;
mem->mem_bar = i;
mem->mem_pdev = pdev;
mem->mem_remap = ioaddr;
mem->mem_len = pci_resource_len(pdev, i);
list_add_tail(&mem->mem_list/*new*/, l_head/*head*/);
++bcntr;
}
开发者ID:GSI-CS-CO,项目名称:kernel_modules,代码行数:42,代码来源:drvr_utils.c
示例5: mhi_init_pcie_device
int mhi_init_pcie_device(mhi_pcie_dev_info *mhi_pcie_dev)
{
int ret_val = 0;
long int sleep_time = 100000;
struct pci_dev *pcie_device =
(struct pci_dev *)mhi_pcie_dev->pcie_device;
/* Enable the device */
do {
ret_val = pci_enable_device(mhi_pcie_dev->pcie_device);
if (0 != ret_val) {
mhi_log(MHI_MSG_ERROR,
"Failed to enable pcie device ret_val %d\n",
ret_val);
mhi_log(MHI_MSG_ERROR,
"Sleeping for ~ %li uS, and retrying.\n",
sleep_time);
usleep(sleep_time);
}
} while (ret_val != 0);
mhi_log(MHI_MSG_INFO, "Successfully enabled pcie device.\n");
mhi_pcie_dev->core.bar0_base =
(uintptr_t)ioremap_nocache(pci_resource_start(pcie_device, 0),
pci_resource_len(pcie_device, 0));
mhi_pcie_dev->core.bar0_end = mhi_pcie_dev->core.bar0_base +
pci_resource_len(pcie_device, 0);
mhi_pcie_dev->core.bar2_base =
(uintptr_t)ioremap_nocache(pci_resource_start(pcie_device, 2),
pci_resource_len(pcie_device, 2));
mhi_pcie_dev->core.bar2_end = mhi_pcie_dev->core.bar2_base +
pci_resource_len(pcie_device, 2);
if (0 == mhi_pcie_dev->core.bar0_base) {
mhi_log(MHI_MSG_ERROR,
"Failed to register for pcie resources\n");
goto mhi_pcie_read_ep_config_err;
}
mhi_log(MHI_MSG_INFO, "Device BAR0 address is at 0x%llx\n",
mhi_pcie_dev->core.bar0_base);
ret_val = pci_request_region(pcie_device, 0, mhi_pcie_driver.name);
if (ret_val)
mhi_log(MHI_MSG_ERROR, "Could not request BAR0 region\n");
mhi_pcie_dev->core.manufact_id = pcie_device->vendor;
mhi_pcie_dev->core.dev_id = pcie_device->device;
if (mhi_pcie_dev->core.manufact_id != MHI_PCIE_VENDOR_ID ||
mhi_pcie_dev->core.dev_id != MHI_PCIE_DEVICE_ID) {
mhi_log(MHI_MSG_ERROR, "Incorrect device/manufacturer ID\n");
goto mhi_device_list_error;
}
/* We need to ensure that the link is stable before we kick off MHI */
return 0;
mhi_device_list_error:
pci_disable_device(pcie_device);
mhi_pcie_read_ep_config_err:
return -EIO;
}
开发者ID:Tkkg1994,项目名称:Platfrom-kccat6,代码行数:60,代码来源:mhi_main.c
示例6: tc86c001_init_one
static int __devinit tc86c001_init_one(struct pci_dev *dev,
const struct pci_device_id *id)
{
int rc;
rc = pci_enable_device(dev);
if (rc)
goto out;
rc = pci_request_region(dev, 5, DRV_NAME);
if (rc) {
printk(KERN_ERR DRV_NAME ": system control regs already in use");
goto out_disable;
}
rc = ide_pci_init_one(dev, &tc86c001_chipset, NULL);
if (rc)
goto out_release;
goto out;
out_release:
pci_release_region(dev, 5);
out_disable:
pci_disable_device(dev);
out:
return rc;
}
开发者ID:CSCLOG,项目名称:beaglebone,代码行数:28,代码来源:tc86c001.c
示例7: virtio_pci_legacy_probe
/* the PCI probing function */
int virtio_pci_legacy_probe(struct virtio_pci_device *vp_dev)
{
struct pci_dev *pci_dev = vp_dev->pci_dev;
int rc;
/* We only own devices >= 0x1000 and <= 0x103f: leave the rest. */
if (pci_dev->device < 0x1000 || pci_dev->device > 0x103f)
return -ENODEV;
if (pci_dev->revision != VIRTIO_PCI_ABI_VERSION) {
printk(KERN_ERR "virtio_pci: expected ABI version %d, got %d\n",
VIRTIO_PCI_ABI_VERSION, pci_dev->revision);
return -ENODEV;
}
rc = dma_set_mask(&pci_dev->dev, DMA_BIT_MASK(64));
if (rc) {
rc = dma_set_mask_and_coherent(&pci_dev->dev, DMA_BIT_MASK(32));
} else {
/*
* The virtio ring base address is expressed as a 32-bit PFN,
* with a page size of 1 << VIRTIO_PCI_QUEUE_ADDR_SHIFT.
*/
dma_set_coherent_mask(&pci_dev->dev,
DMA_BIT_MASK(32 + VIRTIO_PCI_QUEUE_ADDR_SHIFT));
}
if (rc)
dev_warn(&pci_dev->dev, "Failed to enable 64-bit or 32-bit DMA. Trying to continue, but this might not work.\n");
rc = pci_request_region(pci_dev, 0, "virtio-pci-legacy");
if (rc)
return rc;
rc = -ENOMEM;
vp_dev->ioaddr = pci_iomap(pci_dev, 0, 0);
if (!vp_dev->ioaddr)
goto err_iomap;
vp_dev->isr = vp_dev->ioaddr + VIRTIO_PCI_ISR;
/* we use the subsystem vendor/device id as the virtio vendor/device
* id. this allows us to use the same PCI vendor/device id for all
* virtio devices and to identify the particular virtio driver by
* the subsystem ids */
vp_dev->vdev.id.vendor = pci_dev->subsystem_vendor;
vp_dev->vdev.id.device = pci_dev->subsystem_device;
vp_dev->vdev.config = &virtio_pci_config_ops;
vp_dev->config_vector = vp_config_vector;
vp_dev->setup_vq = setup_vq;
vp_dev->del_vq = del_vq;
return 0;
err_iomap:
pci_release_region(pci_dev, 0);
return rc;
}
开发者ID:ReneNyffenegger,项目名称:linux,代码行数:61,代码来源:virtio_pci_legacy.c
示例8: OSPCIResumeDev
/*************************************************************************/ /*!
@Function OSPCIResumeDev
@Description Prepare a PCI device to be resumed by power management
@Input hPVRPCI PCI device handle
@Return PVRSRV_ERROR Services error code
*/ /**************************************************************************/
PVRSRV_ERROR OSPCIResumeDev(PVRSRV_PCI_DEV_HANDLE hPVRPCI)
{
PVR_PCI_DEV *psPVRPCI = (PVR_PCI_DEV *)hPVRPCI;
int err;
int i;
err = pci_set_power_state(psPVRPCI->psPCIDev, pci_choose_state(psPVRPCI->psPCIDev, PMSG_ON));
switch(err)
{
case 0:
break;
case -EIO:
printk(KERN_ERR "OSPCIResumeDev: device doesn't support PCI PM");
break;
case -EINVAL:
printk(KERN_ERR "OSPCIResumeDev: can't enter requested power state");
return PVRSRV_ERROR_UNKNOWN_POWER_STATE;
default:
printk(KERN_ERR "OSPCIResumeDev: pci_set_power_state failed (%d)", err);
return PVRSRV_ERROR_UNKNOWN_POWER_STATE;
}
#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,38))
pci_restore_state(psPVRPCI->psPCIDev);
#else
err = pci_restore_state(psPVRPCI->psPCIDev);
if (err != 0)
{
printk(KERN_ERR "OSPCIResumeDev: pci_restore_state failed (%d)", err);
return PVRSRV_ERROR_PCI_CALL_FAILED;
}
#endif
err = pci_enable_device(psPVRPCI->psPCIDev);
if (err != 0)
{
printk(KERN_ERR "OSPCIResumeDev: Couldn't enable device (%d)", err);
return PVRSRV_ERROR_PCI_CALL_FAILED;
}
if (psPVRPCI->ePCIFlags & HOST_PCI_INIT_FLAG_BUS_MASTER) /* PRQA S 3358 */ /* misuse of enums */
pci_set_master(psPVRPCI->psPCIDev);
/* Restore the PCI resource tracking array */
for (i = 0; i < DEVICE_COUNT_RESOURCE; i++)
{
if (psPVRPCI->abPCIResourceInUse[i])
{
err = pci_request_region(psPVRPCI->psPCIDev, i, PVRSRV_MODNAME);
if (err != 0)
{
printk(KERN_ERR "OSPCIResumeDev: pci_request_region_failed (region %d, error %d)", i, err);
}
}
}
return PVRSRV_OK;
}
开发者ID:DanBjorklund,项目名称:ME302C,代码行数:63,代码来源:pci_support.c
示例9: init_chipset_tc86c001
static unsigned int __devinit init_chipset_tc86c001(struct pci_dev *dev,
const char *name)
{
int err = pci_request_region(dev, 5, name);
if (err)
printk(KERN_ERR "%s: system control regs already in use", name);
return err;
}
开发者ID:ManiacTwister,项目名称:linux-hnd,代码行数:9,代码来源:tc86c001.c
示例10: cs5535_gpio_probe
static int __init cs5535_gpio_probe(struct pci_dev *pdev,
const struct pci_device_id *pci_id)
{
int err;
ulong mask_orig = mask;
/* There are two ways to get the GPIO base address; one is by
* fetching it from MSR_LBAR_GPIO, the other is by reading the
* PCI BAR info. The latter method is easier (especially across
* different architectures), so we'll stick with that for now. If
* it turns out to be unreliable in the face of crappy BIOSes, we
* can always go back to using MSRs.. */
err = pci_enable_device_io(pdev);
if (err) {
dev_err(&pdev->dev, "can't enable device IO\n");
goto done;
}
err = pci_request_region(pdev, GPIO_BAR, DRV_NAME);
if (err) {
dev_err(&pdev->dev, "can't alloc PCI BAR #%d\n", GPIO_BAR);
goto done;
}
/* set up the driver-specific struct */
cs5535_gpio_chip.base = pci_resource_start(pdev, GPIO_BAR);
cs5535_gpio_chip.pdev = pdev;
spin_lock_init(&cs5535_gpio_chip.lock);
dev_info(&pdev->dev, "allocated PCI BAR #%d: base 0x%llx\n", GPIO_BAR,
(unsigned long long) cs5535_gpio_chip.base);
/* mask out reserved pins */
mask &= 0x1F7FFFFF;
/* do not allow pin 28, Power Button, as there's special handling
* in the PMC needed. (note 12, p. 48) */
mask &= ~(1 << 28);
if (mask_orig != mask)
dev_info(&pdev->dev, "mask changed from 0x%08lX to 0x%08lX\n",
mask_orig, mask);
/* finally, register with the generic GPIO API */
err = gpiochip_add(&cs5535_gpio_chip.chip);
if (err)
goto release_region;
dev_info(&pdev->dev, DRV_NAME ": GPIO support successfully loaded.\n");
return 0;
release_region:
pci_release_region(pdev, GPIO_BAR);
done:
return err;
}
开发者ID:A2109devs,项目名称:lenovo_a2109a_kernel,代码行数:57,代码来源:cs5535-gpio.c
示例11: OSPCIAddrRangeFunc
/*************************************************************************/ /*!
@Function OSPCIAddrRangeFunc
@Description Internal support function for various address range related
functions
@Input eFunc Function to perform
@Input hPVRPCI PCI device handle
@Input ui32Index Address range index
@Return IMG_UINT32 Function dependent value
*/ /**************************************************************************/
static IMG_UINT32 OSPCIAddrRangeFunc(enum HOST_PCI_ADDR_RANGE_FUNC eFunc,
PVRSRV_PCI_DEV_HANDLE hPVRPCI,
IMG_UINT32 ui32Index)
{
PVR_PCI_DEV *psPVRPCI = (PVR_PCI_DEV *)hPVRPCI;
if (ui32Index >= DEVICE_COUNT_RESOURCE)
{
printk(KERN_ERR "OSPCIAddrRangeFunc: Index out of range");
return 0;
}
switch (eFunc)
{
case HOST_PCI_ADDR_RANGE_FUNC_LEN:
{
return pci_resource_len(psPVRPCI->psPCIDev, ui32Index);
}
case HOST_PCI_ADDR_RANGE_FUNC_START:
{
return pci_resource_start(psPVRPCI->psPCIDev, ui32Index);
}
case HOST_PCI_ADDR_RANGE_FUNC_END:
{
return pci_resource_end(psPVRPCI->psPCIDev, ui32Index);
}
case HOST_PCI_ADDR_RANGE_FUNC_REQUEST:
{
int err = pci_request_region(psPVRPCI->psPCIDev, (IMG_INT)ui32Index, PVRSRV_MODNAME);
if (err != 0)
{
printk(KERN_ERR "OSPCIAddrRangeFunc: pci_request_region_failed (%d)", err);
return 0;
}
psPVRPCI->abPCIResourceInUse[ui32Index] = IMG_TRUE;
return 1;
}
case HOST_PCI_ADDR_RANGE_FUNC_RELEASE:
{
if (psPVRPCI->abPCIResourceInUse[ui32Index])
{
pci_release_region(psPVRPCI->psPCIDev, (IMG_INT)ui32Index);
psPVRPCI->abPCIResourceInUse[ui32Index] = IMG_FALSE;
}
return 1;
}
default:
{
printk(KERN_ERR "OSPCIAddrRangeFunc: Unknown function");
break;
}
}
return 0;
}
开发者ID:DanBjorklund,项目名称:ME302C,代码行数:64,代码来源:pci_support.c
示例12: asd_map_memio
static int asd_map_memio(struct asd_ha_struct *asd_ha)
{
int err, i;
struct asd_ha_addrspace *io_handle;
asd_ha->iospace = 0;
for (i = 0; i < 3; i += 2) {
io_handle = &asd_ha->io_handle[i==0?0:1];
io_handle->start = pci_resource_start(asd_ha->pcidev, i);
io_handle->len = pci_resource_len(asd_ha->pcidev, i);
io_handle->flags = pci_resource_flags(asd_ha->pcidev, i);
err = -ENODEV;
if (!io_handle->start || !io_handle->len) {
asd_printk("MBAR%d start or length for %s is 0.\n",
i==0?0:1, pci_name(asd_ha->pcidev));
goto Err;
}
err = pci_request_region(asd_ha->pcidev, i, ASD_DRIVER_NAME);
if (err) {
asd_printk("couldn't reserve memory region for %s\n",
pci_name(asd_ha->pcidev));
goto Err;
}
if (io_handle->flags & IORESOURCE_CACHEABLE)
io_handle->addr = ioremap(io_handle->start,
io_handle->len);
else
io_handle->addr = ioremap_nocache(io_handle->start,
io_handle->len);
if (!io_handle->addr) {
asd_printk("couldn't map MBAR%d of %s\n", i==0?0:1,
pci_name(asd_ha->pcidev));
err = -ENOMEM;
goto Err_unreq;
}
}
return 0;
Err_unreq:
pci_release_region(asd_ha->pcidev, i);
Err:
if (i > 0) {
io_handle = &asd_ha->io_handle[0];
iounmap(io_handle->addr);
pci_release_region(asd_ha->pcidev, 0);
}
return err;
}
开发者ID:aejsmith,项目名称:linux,代码行数:48,代码来源:aic94xx_init.c
示例13: sram_init
/* enable SRAM if sram detected */
static void sram_init(struct usb_hcd *hcd)
{
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
void __iomem *base = NULL;
void __iomem *addr = NULL;
if (!hcd->has_sram)
return;
ehci->sram_addr = pci_resource_start(pdev, 1);
ehci->sram_size = pci_resource_len(pdev, 1);
ehci_info(ehci, "Found HCD SRAM at %x size:%x\n",
ehci->sram_addr, ehci->sram_size);
if (pci_request_region(pdev, 1, kobject_name(&pdev->dev.kobj))) {
ehci_warn(ehci, "SRAM request failed\n");
hcd->has_sram = 0;
return;
} else if (!dma_declare_coherent_memory(&pdev->dev, ehci->sram_addr,
ehci->sram_addr, ehci->sram_size, DMA_MEMORY_MAP)) {
ehci_warn(ehci, "SRAM DMA declare failed\n");
pci_release_region(pdev, 1);
hcd->has_sram = 0;
return;
}
/* initialize SRAM to 0 to avoid ECC errors during entry into D0 */
base = ioremap_nocache(ehci->sram_addr, ehci->sram_size);
if (base == NULL) {
ehci_warn(ehci, "SRAM init: ioremap failed\n");
return;
}
addr = base;
while (addr < base + ehci->sram_size) {
writel(0x0, addr);
addr = addr + 4;
}
iounmap(base);
}
开发者ID:AirShark,项目名称:android_kernel_lenovo_redhookbay,代码行数:43,代码来源:ehci-pci.c
示例14: mem_alloc
static int mem_alloc(struct pci_dev *pdev, uintptr_t *phy_addr,
void **virt_addr, int bar)
{
void __iomem *mem;
int ret = 0;
unsigned long start = 0, len;
/* dedicate isolated memory region */
start = pci_resource_start(pdev, bar);
len = pci_resource_len(pdev, bar);
if (!start || !len) {
dev_err(&pdev->dev, "bar %d address not set\n", bar);
ret = -EINVAL;
goto err;
}
ret = pci_request_region(pdev, bar, "intel_mcu");
if (ret) {
dev_err(&pdev->dev,
"failed to request psh region 0x%lx-0x%lx\n",
start,
(unsigned long)pci_resource_end(pdev, bar));
goto err;
}
mem = ioremap_nocache(start, len);
if (!mem) {
dev_err(&pdev->dev, "can not ioremap app imr address\n");
ret = -EINVAL;
goto err_ioremap;
}
*phy_addr = start;
*virt_addr = (void *)mem;
return 0;
err_ioremap:
pci_release_region(pdev, bar);
err:
return ret;
}
开发者ID:0x000000FF,项目名称:Linux4Edison,代码行数:41,代码来源:intel_mcu_common.c
示例15: serial_hsu_pci_port_probe
static int serial_hsu_pci_port_probe(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
struct uart_hsu_port *up;
int ret, port, hw_type;
resource_size_t start, len;
start = pci_resource_start(pdev, 0);
len = pci_resource_len(pdev, 0);
dev_info(&pdev->dev,
"FUNC: %d driver: %ld addr:%lx len:%lx\n",
PCI_FUNC(pdev->devfn), ent->driver_data,
(unsigned long) start, (unsigned long) len);
port = intel_mid_hsu_func_to_port(PCI_FUNC(pdev->devfn));
if (port == -1)
return 0;
ret = pci_enable_device(pdev);
if (ret)
return ret;
ret = pci_request_region(pdev, 0, "hsu");
if (ret)
goto err;
up = serial_hsu_port_setup(&pdev->dev, port, start, len,
pdev->irq);
if (IS_ERR(up))
goto err;
pci_set_drvdata(pdev, up);
pm_runtime_put_noidle(&pdev->dev);
pm_runtime_allow(&pdev->dev);
return 0;
err:
pci_disable_device(pdev);
return ret;
}
开发者ID:Katarzynasrom,项目名称:android_kernel_lenovo_spark,代码行数:41,代码来源:mfd_pci.c
示例16: serial_hsu_pci_dma_probe
static int serial_hsu_pci_dma_probe(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
struct hsu_dma_chan *dchan;
int ret, share_irq = 0;
resource_size_t start, len;
start = pci_resource_start(pdev, 0);
len = pci_resource_len(pdev, 0);
dev_info(&pdev->dev,
"FUNC: %d driver: %ld addr:%lx len:%lx\n",
PCI_FUNC(pdev->devfn), ent->driver_data,
(unsigned long) pci_resource_start(pdev, 0),
(unsigned long) pci_resource_len(pdev, 0));
ret = pci_enable_device(pdev);
if (ret)
return ret;
ret = pci_request_region(pdev, 0, "hsu dma");
if (ret)
goto err;
/* share irq with port? ANN all and TNG chip from B0 stepping */
if ((intel_mid_identify_cpu() == INTEL_MID_CPU_CHIP_TANGIER &&
pdev->revision >= 0x1) ||
intel_mid_identify_cpu() == INTEL_MID_CPU_CHIP_ANNIEDALE)
share_irq = 1;
ret = serial_hsu_dma_setup(&pdev->dev, start, len, pdev->irq, share_irq);
if (ret)
goto err;
return 0;
err:
pci_disable_device(pdev);
return ret;
}
开发者ID:Katarzynasrom,项目名称:android_kernel_lenovo_spark,代码行数:39,代码来源:mfd_pci.c
示例17: asd_map_ioport
static int __devinit asd_map_ioport(struct asd_ha_struct *asd_ha)
{
int i = PCI_IOBAR_OFFSET, err;
struct asd_ha_addrspace *io_handle = &asd_ha->io_handle[0];
asd_ha->iospace = 1;
io_handle->start = pci_resource_start(asd_ha->pcidev, i);
io_handle->len = pci_resource_len(asd_ha->pcidev, i);
io_handle->flags = pci_resource_flags(asd_ha->pcidev, i);
io_handle->addr = (void __iomem *) io_handle->start;
if (!io_handle->start || !io_handle->len) {
asd_printk("couldn't get IO ports for %s\n",
pci_name(asd_ha->pcidev));
return -ENODEV;
}
err = pci_request_region(asd_ha->pcidev, i, ASD_DRIVER_NAME);
if (err) {
asd_printk("couldn't reserve io space for %s\n",
pci_name(asd_ha->pcidev));
}
return err;
}
开发者ID:Mr-Aloof,项目名称:wl500g,代码行数:23,代码来源:aic94xx_init.c
示例18: piix4_poweroff_probe
static int piix4_poweroff_probe(struct pci_dev *dev,
const struct pci_device_id *id)
{
int res;
if (pm_dev)
return -EINVAL;
/* Request access to the PIIX4 PM IO registers */
res = pci_request_region(dev, piix4_pm_io_region,
"PIIX4 PM IO registers");
if (res) {
dev_err(&dev->dev, "failed to request PM IO registers: %d\n",
res);
return res;
}
pm_dev = dev;
io_offset = pci_resource_start(dev, piix4_pm_io_region);
pm_power_off = piix4_poweroff;
return 0;
}
开发者ID:AshishNamdev,项目名称:linux,代码行数:23,代码来源:piix4-poweroff.c
示例19: while
void *FindPCI1750Card(void)
{
int iFound = 0;
struct pci_dev *pDevice = NULL;
if (pcibios_present())
{
while((pDevice = pci_find_device(0x13fe, 1750, pDevice)))
{
pci_setup_device(pDevice);
if (pci_request_region(pDevice, 2, "plc_labcard") == 0)
iFound = 1;
break;
}
}
if (iFound)
return ((void *)pDevice);
return NULL;
}
开发者ID:voloda,项目名称:softwareplc,代码行数:24,代码来源:drv_sup.c
示例20: platform_pci_init
static int __devinit platform_pci_init(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
int i, ret;
long ioaddr;
long mmio_addr, mmio_len;
unsigned int max_nr_gframes;
i = pci_enable_device(pdev);
if (i)
return i;
ioaddr = pci_resource_start(pdev, 0);
mmio_addr = pci_resource_start(pdev, 1);
mmio_len = pci_resource_len(pdev, 1);
if (mmio_addr == 0 || ioaddr == 0) {
dev_err(&pdev->dev, "no resources found\n");
ret = -ENOENT;
goto pci_out;
}
ret = pci_request_region(pdev, 1, DRV_NAME);
if (ret < 0)
goto pci_out;
ret = pci_request_region(pdev, 0, DRV_NAME);
if (ret < 0)
goto mem_out;
platform_mmio = mmio_addr;
platform_mmiolen = mmio_len;
if (!xen_have_vector_callback) {
ret = xen_allocate_irq(pdev);
if (ret) {
dev_warn(&pdev->dev, "request_irq failed err=%d\n", ret);
goto out;
}
callback_via = get_callback_via(pdev);
ret = xen_set_callback_via(callback_via);
if (ret) {
dev_warn(&pdev->dev, "Unable to set the evtchn callback "
"err=%d\n", ret);
goto out;
}
}
max_nr_gframes = gnttab_max_grant_frames();
xen_hvm_resume_frames = alloc_xen_mmio(PAGE_SIZE * max_nr_gframes);
ret = gnttab_init();
if (ret)
goto out;
xenbus_probe(NULL);
return 0;
out:
pci_release_region(pdev, 0);
mem_out:
pci_release_region(pdev, 1);
pci_out:
pci_disable_device(pdev);
return ret;
}
开发者ID:0xroot,项目名称:Blackphone-BP1-Kernel,代码行数:65,代码来源:platform-pci.c
注:本文中的pci_request_region函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。 |
请发表评论