本文整理汇总了C++中dev_dbg函数的典型用法代码示例。如果您正苦于以下问题：C++ dev_dbg函数的具体用法？C++ dev_dbg怎么用？C++ dev_dbg使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了dev_dbg函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: mxs_saif_set_clk
static int mxs_saif_set_clk(struct mxs_saif *saif,
unsigned int mclk,
unsigned int rate)
{
u32 scr;
int ret;
struct mxs_saif *master_saif;
dev_dbg(saif->dev, "mclk %d rate %d\n", mclk, rate);
/* */
master_saif = mxs_saif_get_master(saif);
if (!master_saif)
return -EINVAL;
dev_dbg(saif->dev, "master saif%d\n", master_saif->id);
/* */
if (master_saif->ongoing && rate != master_saif->cur_rate) {
dev_err(saif->dev,
"can not change clock, master saif%d(rate %d) is ongoing\n",
master_saif->id, master_saif->cur_rate);
return -EINVAL;
}
scr = __raw_readl(master_saif->base + SAIF_CTRL);
scr &= ~BM_SAIF_CTRL_BITCLK_MULT_RATE;
scr &= ~BM_SAIF_CTRL_BITCLK_BASE_RATE;
/*
*/
clk_prepare_enable(master_saif->clk);
if (master_saif->mclk_in_use) {
if (mclk % 32 == 0) {
scr &= ~BM_SAIF_CTRL_BITCLK_BASE_RATE;
ret = clk_set_rate(master_saif->clk, 512 * rate);
} else if (mclk % 48 == 0) {
scr |= BM_SAIF_CTRL_BITCLK_BASE_RATE;
ret = clk_set_rate(master_saif->clk, 384 * rate);
} else {
/* */
clk_disable_unprepare(master_saif->clk);
return -EINVAL;
}
} else {
ret = clk_set_rate(master_saif->clk, 512 * rate);
scr &= ~BM_SAIF_CTRL_BITCLK_BASE_RATE;
}
clk_disable_unprepare(master_saif->clk);
if (ret)
return ret;
master_saif->cur_rate = rate;
if (!master_saif->mclk_in_use) {
__raw_writel(scr, master_saif->base + SAIF_CTRL);
return 0;
}
/*
*/
switch (mclk / rate) {
case 32:
scr |= BF_SAIF_CTRL_BITCLK_MULT_RATE(4);
break;
case 64:
scr |= BF_SAIF_CTRL_BITCLK_MULT_RATE(3);
break;
case 128:
scr |= BF_SAIF_CTRL_BITCLK_MULT_RATE(2);
break;
case 256:
scr |= BF_SAIF_CTRL_BITCLK_MULT_RATE(1);
break;
case 512:
scr |= BF_SAIF_CTRL_BITCLK_MULT_RATE(0);
break;
case 48:
scr |= BF_SAIF_CTRL_BITCLK_MULT_RATE(3);
break;
case 96:
scr |= BF_SAIF_CTRL_BITCLK_MULT_RATE(2);
break;
case 192:
scr |= BF_SAIF_CTRL_BITCLK_MULT_RATE(1);
//.........这里部分代码省略.........
开发者ID:romanbb，项目名称:android_kernel_lge_d851，代码行数:101，代码来源:mxs-saif.c
示例2: atmel_ac97c_interrupt
static irqreturn_t atmel_ac97c_interrupt(int irq, void *dev)
{
struct atmel_ac97c *chip = (struct atmel_ac97c *)dev;
irqreturn_t retval = IRQ_NONE;
u32 sr = ac97c_readl(chip, SR);
u32 casr = ac97c_readl(chip, CASR);
u32 cosr = ac97c_readl(chip, COSR);
u32 camr = ac97c_readl(chip, CAMR);
if (sr & AC97C_SR_CAEVT) {
struct snd_pcm_runtime *runtime;
int offset, next_period, block_size;
dev_dbg(&chip->pdev->dev, "channel A event%s%s%s%s%s%s\n",
casr & AC97C_CSR_OVRUN ? " OVRUN" : "",
casr & AC97C_CSR_RXRDY ? " RXRDY" : "",
casr & AC97C_CSR_UNRUN ? " UNRUN" : "",
casr & AC97C_CSR_TXEMPTY ? " TXEMPTY" : "",
casr & AC97C_CSR_TXRDY ? " TXRDY" : "",
!casr ? " NONE" : "");
if (!cpu_is_at32ap7000()) {
if ((casr & camr) & AC97C_CSR_ENDTX) {
runtime = chip->playback_substream->runtime;
block_size = frames_to_bytes(runtime,
runtime->period_size);
chip->playback_period++;
if (chip->playback_period == runtime->periods)
chip->playback_period = 0;
next_period = chip->playback_period + 1;
if (next_period == runtime->periods)
next_period = 0;
offset = block_size * next_period;
writel(runtime->dma_addr + offset,
chip->regs + ATMEL_PDC_TNPR);
writel(block_size / 2,
chip->regs + ATMEL_PDC_TNCR);
snd_pcm_period_elapsed(
chip->playback_substream);
}
if ((casr & camr) & AC97C_CSR_ENDRX) {
runtime = chip->capture_substream->runtime;
block_size = frames_to_bytes(runtime,
runtime->period_size);
chip->capture_period++;
if (chip->capture_period == runtime->periods)
chip->capture_period = 0;
next_period = chip->capture_period + 1;
if (next_period == runtime->periods)
next_period = 0;
offset = block_size * next_period;
writel(runtime->dma_addr + offset,
chip->regs + ATMEL_PDC_RNPR);
writel(block_size / 2,
chip->regs + ATMEL_PDC_RNCR);
snd_pcm_period_elapsed(chip->capture_substream);
}
}
retval = IRQ_HANDLED;
}
if (sr & AC97C_SR_COEVT) {
dev_info(&chip->pdev->dev, "codec channel event%s%s%s%s%s\n",
cosr & AC97C_CSR_OVRUN ? " OVRUN" : "",
cosr & AC97C_CSR_RXRDY ? " RXRDY" : "",
cosr & AC97C_CSR_TXEMPTY ? " TXEMPTY" : "",
cosr & AC97C_CSR_TXRDY ? " TXRDY" : "",
!cosr ? " NONE" : "");
retval = IRQ_HANDLED;
}
if (retval == IRQ_NONE) {
dev_err(&chip->pdev->dev, "spurious interrupt sr 0x%08x "
"casr 0x%08x cosr 0x%08x\n", sr, casr, cosr);
}
return retval;
}
开发者ID:AdrianHuang，项目名称:linux-3.8.13，代码行数:83，代码来源:ac97c.c
示例3: uhci_hub_control
/* size of returned buffer is part of USB spec */
static int uhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
u16 wIndex, char *buf, u16 wLength)
{
struct uhci_hcd *uhci = hcd_to_uhci(hcd);
int status, lstatus, retval = 0, len = 0;
unsigned int port = wIndex - 1;
unsigned long port_addr = uhci->io_addr + USBPORTSC1 + 2 * port;
u16 wPortChange, wPortStatus;
unsigned long flags;
if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags) || uhci->dead)
return -ETIMEDOUT;
spin_lock_irqsave(&uhci->lock, flags);
switch (typeReq) {
case GetHubStatus:
*(__le32 *)buf = cpu_to_le32(0);
OK(4); /* hub power */
case GetPortStatus:
if (port >= uhci->rh_numports)
goto err;
uhci_check_ports(uhci);
status = inw(port_addr);
/* Intel controllers report the OverCurrent bit active on.
* VIA controllers report it active off, so we'll adjust the
* bit value. (It's not standardized in the UHCI spec.)
*/
if (to_pci_dev(hcd->self.controller)->vendor ==
PCI_VENDOR_ID_VIA)
status ^= USBPORTSC_OC;
/* UHCI doesn't support C_RESET (always false) */
wPortChange = lstatus = 0;
if (status & USBPORTSC_CSC)
wPortChange |= USB_PORT_STAT_C_CONNECTION;
if (status & USBPORTSC_PEC)
wPortChange |= USB_PORT_STAT_C_ENABLE;
if ((status & USBPORTSC_OCC) && !ignore_oc)
wPortChange |= USB_PORT_STAT_C_OVERCURRENT;
if (test_bit(port, &uhci->port_c_suspend)) {
wPortChange |= USB_PORT_STAT_C_SUSPEND;
lstatus |= 1;
}
if (test_bit(port, &uhci->resuming_ports))
lstatus |= 4;
/* UHCI has no power switching (always on) */
wPortStatus = USB_PORT_STAT_POWER;
if (status & USBPORTSC_CCS)
wPortStatus |= USB_PORT_STAT_CONNECTION;
if (status & USBPORTSC_PE) {
wPortStatus |= USB_PORT_STAT_ENABLE;
if (status & SUSPEND_BITS)
wPortStatus |= USB_PORT_STAT_SUSPEND;
}
if (status & USBPORTSC_OC)
wPortStatus |= USB_PORT_STAT_OVERCURRENT;
if (status & USBPORTSC_PR)
wPortStatus |= USB_PORT_STAT_RESET;
if (status & USBPORTSC_LSDA)
wPortStatus |= USB_PORT_STAT_LOW_SPEED;
if (wPortChange)
dev_dbg(uhci_dev(uhci), "port %d portsc %04x,%02x\n",
wIndex, status, lstatus);
*(__le16 *)buf = cpu_to_le16(wPortStatus);
*(__le16 *)(buf + 2) = cpu_to_le16(wPortChange);
OK(4);
case SetHubFeature: /* We don't implement these */
case ClearHubFeature:
switch (wValue) {
case C_HUB_OVER_CURRENT:
case C_HUB_LOCAL_POWER:
OK(0);
default:
goto err;
}
break;
case SetPortFeature:
if (port >= uhci->rh_numports)
goto err;
switch (wValue) {
case USB_PORT_FEAT_SUSPEND:
SET_RH_PORTSTAT(USBPORTSC_SUSP);
OK(0);
case USB_PORT_FEAT_RESET:
SET_RH_PORTSTAT(USBPORTSC_PR);
/* Reset terminates Resume signalling */
uhci_finish_suspend(uhci, port, port_addr);
/* USB v2.0 7.1.7.5 */
uhci->ports_timeout = jiffies + msecs_to_jiffies(50);
//.........这里部分代码省略.........
开发者ID:458941968，项目名称:mini2440-kernel-2.6.29，代码行数:101，代码来源:uhci-hub.c
示例4: sis630_block_data
static int sis630_block_data(struct i2c_adapter *adap, union i2c_smbus_data *data, int read_write)
{
int i, len = 0, rc = 0;
u8 oldclock = 0;
if (read_write == I2C_SMBUS_WRITE) {
len = data->block[0];
if (len < 0)
len = 0;
else if (len > 32)
len = 32;
sis630_write(SMB_COUNT, len);
for (i=1; i <= len; i++) {
dev_dbg(&adap->dev, "set data 0x%02x\n", data->block[i]);
/* set data */
sis630_write(SMB_BYTE+(i-1)%8, data->block[i]);
if (i==8 || (len<8 && i==len)) {
dev_dbg(&adap->dev, "start trans len=%d i=%d\n",len ,i);
/* first transaction */
if (sis630_transaction_start(adap, SIS630_BLOCK_DATA, &oldclock))
return -1;
}
else if ((i-1)%8 == 7 || i==len) {
dev_dbg(&adap->dev, "trans_wait len=%d i=%d\n",len,i);
if (i>8) {
dev_dbg(&adap->dev, "clear smbary_sts len=%d i=%d\n",len,i);
/*
If this is not first transaction,
we must clear sticky bit.
clear SMBARY_STS
*/
sis630_write(SMB_STS,0x10);
}
if (sis630_transaction_wait(adap, SIS630_BLOCK_DATA)) {
dev_dbg(&adap->dev, "trans_wait failed\n");
rc = -1;
break;
}
}
}
}
else {
/* read request */
data->block[0] = len = 0;
if (sis630_transaction_start(adap, SIS630_BLOCK_DATA, &oldclock)) {
return -1;
}
do {
if (sis630_transaction_wait(adap, SIS630_BLOCK_DATA)) {
dev_dbg(&adap->dev, "trans_wait failed\n");
rc = -1;
break;
}
/* if this first transaction then read byte count */
if (len == 0)
data->block[0] = sis630_read(SMB_COUNT);
/* just to be sure */
if (data->block[0] > 32)
data->block[0] = 32;
dev_dbg(&adap->dev, "block data read len=0x%x\n", data->block[0]);
for (i=0; i < 8 && len < data->block[0]; i++,len++) {
dev_dbg(&adap->dev, "read i=%d len=%d\n", i, len);
data->block[len+1] = sis630_read(SMB_BYTE+i);
}
dev_dbg(&adap->dev, "clear smbary_sts len=%d i=%d\n",len,i);
/* clear SMBARY_STS */
sis630_write(SMB_STS,0x10);
} while(len < data->block[0]);
}
sis630_transaction_end(adap, oldclock);
return rc;
}
开发者ID:wxlong，项目名称:Test，代码行数:79，代码来源:i2c-sis630.c
示例5: ltr558_probe
static int ltr558_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
int ret = 0;
struct ltr558_chip *chip;
struct iio_dev *indio_dev;
/* data memory allocation */
indio_dev = iio_device_alloc(sizeof(*chip));
if (indio_dev == NULL) {
dev_err(&client->dev, "iio allocation fails\n");
ret = -ENOMEM;
goto exit;
}
chip = iio_priv(indio_dev);
i2c_set_clientdata(client, indio_dev);
chip->client = client;
chip->irq = client->irq;
if (chip->irq > 0) {
ret = request_threaded_irq(chip->irq, NULL, threshold_isr,
IRQF_SHARED, "LTR558_ALS", chip);
if (ret) {
dev_err(&client->dev, "Unable to register irq %d; "
"ret %d\n", chip->irq, ret);
goto exit_iio_free;
}
}
mutex_init(&chip->lock);
ret = ltr558_chip_init(client);
if (ret)
goto exit_irq;
indio_dev->info = <r558_info;
indio_dev->dev.parent = &client->dev;
indio_dev->modes = INDIO_DIRECT_MODE;
ret = iio_device_register(indio_dev);
if (ret) {
dev_err(&client->dev, "iio registration fails\n");
goto exit_irq;
}
chip->supply[VDD] = regulator_get(&client->dev, "vdd");
if (IS_ERR(chip->supply[VDD])) {
dev_err(&client->dev, "could not get vdd regulator\n");
ret = PTR_ERR(chip->supply[VDD]);
goto exit_irq;
}
chip->supply[LED] = regulator_get(&client->dev, "vled");
if (IS_ERR(chip->supply[LED])) {
dev_err(&client->dev, "could not get vled regulator\n");
ret = PTR_ERR(chip->supply[LED]);
goto exit_irq;
}
ret = regulator_enable(chip->supply[VDD]);
if (ret) {
dev_err(&client->dev,
"func:%s regulator enable failed\n", __func__);
goto exit_irq;
}
ret = i2c_smbus_read_byte_data(client, LTR558_MANUFACTURER_ID);
if (ret < 0) {
dev_err(&client->dev, "Err in reading register %d, error %d\n",
LTR558_MANUFACTURER_ID, ret);
goto exit_irq;
}
if (ret != LTR_MANUFACTURER_ID) {
dev_err(&client->dev, "sensor not found\n");
goto exit_irq;
}
ret = regulator_disable(chip->supply[VDD]);
if (ret) {
dev_err(&client->dev,
"func:%s regulator disable failed\n", __func__);
goto exit_irq;
}
dev_dbg(&client->dev, "%s() success\n", __func__);
return 0;
exit_irq:
if (chip->irq > 0)
free_irq(chip->irq, chip);
exit_iio_free:
iio_device_free(indio_dev);
exit:
return ret;
}
开发者ID:FrozenCow，项目名称:FIRE-ICE，代码行数:98，代码来源:ltr558als.c
示例6: synquacer_i2c_probe
static int synquacer_i2c_probe(struct platform_device *pdev)
{
struct synquacer_i2c *i2c;
struct resource *r;
u32 bus_speed;
int ret;
i2c = devm_kzalloc(&pdev->dev, sizeof(*i2c), GFP_KERNEL);
if (!i2c)
return -ENOMEM;
bus_speed = i2c_acpi_find_bus_speed(&pdev->dev);
if (!bus_speed)
device_property_read_u32(&pdev->dev, "clock-frequency",
&bus_speed);
device_property_read_u32(&pdev->dev, "socionext,pclk-rate",
&i2c->pclkrate);
i2c->pclk = devm_clk_get(&pdev->dev, "pclk");
if (IS_ERR(i2c->pclk) && PTR_ERR(i2c->pclk) == -EPROBE_DEFER)
return -EPROBE_DEFER;
if (!IS_ERR_OR_NULL(i2c->pclk)) {
dev_dbg(&pdev->dev, "clock source %p\n", i2c->pclk);
ret = clk_prepare_enable(i2c->pclk);
if (ret) {
dev_err(&pdev->dev, "failed to enable clock (%d)\n",
ret);
return ret;
}
i2c->pclkrate = clk_get_rate(i2c->pclk);
}
if (i2c->pclkrate < SYNQUACER_I2C_MIN_CLK_RATE ||
i2c->pclkrate > SYNQUACER_I2C_MAX_CLK_RATE) {
dev_err(&pdev->dev, "PCLK missing or out of range (%d)\n",
i2c->pclkrate);
return -EINVAL;
}
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
i2c->base = devm_ioremap_resource(&pdev->dev, r);
if (IS_ERR(i2c->base))
return PTR_ERR(i2c->base);
i2c->irq = platform_get_irq(pdev, 0);
if (i2c->irq < 0) {
dev_err(&pdev->dev, "no IRQ resource found\n");
return -ENODEV;
}
ret = devm_request_irq(&pdev->dev, i2c->irq, synquacer_i2c_isr,
0, dev_name(&pdev->dev), i2c);
if (ret < 0) {
dev_err(&pdev->dev, "cannot claim IRQ %d\n", i2c->irq);
return ret;
}
i2c->state = STATE_IDLE;
i2c->dev = &pdev->dev;
i2c->adapter = synquacer_i2c_ops;
i2c_set_adapdata(&i2c->adapter, i2c);
i2c->adapter.dev.parent = &pdev->dev;
i2c->adapter.nr = pdev->id;
init_completion(&i2c->completion);
if (bus_speed < 400000)
i2c->speed_khz = SYNQUACER_I2C_SPEED_SM;
else
i2c->speed_khz = SYNQUACER_I2C_SPEED_FM;
synquacer_i2c_hw_init(i2c);
ret = i2c_add_numbered_adapter(&i2c->adapter);
if (ret) {
dev_err(&pdev->dev, "failed to add bus to i2c core\n");
return ret;
}
platform_set_drvdata(pdev, i2c);
dev_info(&pdev->dev, "%s: synquacer_i2c adapter\n",
dev_name(&i2c->adapter.dev));
return 0;
}
开发者ID:AlexShiLucky，项目名称:linux，代码行数:87，代码来源:i2c-synquacer.c
示例7: axp288_charger_extcon_evt_worker
static void axp288_charger_extcon_evt_worker(struct work_struct *work)
{
struct axp288_chrg_info *info =
container_of(work, struct axp288_chrg_info, cable.work);
int ret, current_limit;
bool changed = false;
struct extcon_dev *edev = info->cable.edev;
bool old_connected = info->cable.connected;
/* Determine cable/charger type */
if (extcon_get_cable_state_(edev, EXTCON_CHG_USB_SDP) > 0) {
dev_dbg(&info->pdev->dev, "USB SDP charger is connected");
info->cable.connected = true;
info->cable.chg_type = POWER_SUPPLY_TYPE_USB;
} else if (extcon_get_cable_state_(edev, EXTCON_CHG_USB_CDP) > 0) {
dev_dbg(&info->pdev->dev, "USB CDP charger is connected");
info->cable.connected = true;
info->cable.chg_type = POWER_SUPPLY_TYPE_USB_CDP;
} else if (extcon_get_cable_state_(edev, EXTCON_CHG_USB_DCP) > 0) {
dev_dbg(&info->pdev->dev, "USB DCP charger is connected");
info->cable.connected = true;
info->cable.chg_type = POWER_SUPPLY_TYPE_USB_DCP;
} else {
if (old_connected)
dev_dbg(&info->pdev->dev, "USB charger disconnected");
info->cable.connected = false;
info->cable.chg_type = POWER_SUPPLY_TYPE_USB;
}
/* Cable status changed */
if (old_connected != info->cable.connected)
changed = true;
if (!changed)
return;
mutex_lock(&info->lock);
if (info->is_charger_enabled && !info->cable.connected) {
info->enable_charger = false;
ret = axp288_charger_enable_charger(info, info->enable_charger);
if (ret < 0)
dev_err(&info->pdev->dev,
"cannot disable charger (%d)", ret);
} else if (!info->is_charger_enabled && info->cable.connected) {
switch (info->cable.chg_type) {
case POWER_SUPPLY_TYPE_USB:
current_limit = ILIM_500MA;
break;
case POWER_SUPPLY_TYPE_USB_CDP:
current_limit = ILIM_1500MA;
break;
case POWER_SUPPLY_TYPE_USB_DCP:
current_limit = ILIM_2000MA;
break;
default:
/* Unknown */
current_limit = 0;
break;
}
/* Set vbus current limit first, then enable charger */
ret = axp288_charger_set_vbus_inlmt(info, current_limit);
if (ret < 0) {
dev_err(&info->pdev->dev,
"error setting current limit (%d)", ret);
} else {
info->enable_charger = (current_limit > 0);
ret = axp288_charger_enable_charger(info,
info->enable_charger);
if (ret < 0)
dev_err(&info->pdev->dev,
"cannot enable charger (%d)", ret);
}
}
if (changed)
info->health = axp288_get_charger_health(info);
mutex_unlock(&info->lock);
if (changed)
power_supply_changed(info->psy_usb);
}
开发者ID:acton393，项目名称:linux，代码行数:85，代码来源:axp288_charger.c
示例8: axp288_charger_probe
static int axp288_charger_probe(struct platform_device *pdev)
{
int ret, i, pirq;
struct axp288_chrg_info *info;
struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent);
struct power_supply_config charger_cfg = {};
info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
if (!info)
return -ENOMEM;
info->pdev = pdev;
info->regmap = axp20x->regmap;
info->regmap_irqc = axp20x->regmap_irqc;
info->pdata = pdev->dev.platform_data;
if (!info->pdata) {
/* Try ACPI provided pdata via device properties */
if (!device_property_present(&pdev->dev,
"axp288_charger_data\n"))
dev_err(&pdev->dev, "failed to get platform data\n");
return -ENODEV;
}
info->cable.edev = extcon_get_extcon_dev(AXP288_EXTCON_DEV_NAME);
if (info->cable.edev == NULL) {
dev_dbg(&pdev->dev, "%s is not ready, probe deferred\n",
AXP288_EXTCON_DEV_NAME);
return -EPROBE_DEFER;
}
/* Register for extcon notification */
INIT_WORK(&info->cable.work, axp288_charger_extcon_evt_worker);
info->cable.nb.notifier_call = axp288_charger_handle_cable_evt;
ret = extcon_register_notifier(info->cable.edev, EXTCON_CHG_USB_SDP,
&info->cable.nb);
if (ret) {
dev_err(&info->pdev->dev,
"failed to register extcon notifier for SDP %d\n", ret);
return ret;
}
ret = extcon_register_notifier(info->cable.edev, EXTCON_CHG_USB_CDP,
&info->cable.nb);
if (ret) {
dev_err(&info->pdev->dev,
"failed to register extcon notifier for CDP %d\n", ret);
extcon_unregister_notifier(info->cable.edev,
EXTCON_CHG_USB_SDP, &info->cable.nb);
return ret;
}
ret = extcon_register_notifier(info->cable.edev, EXTCON_CHG_USB_DCP,
&info->cable.nb);
if (ret) {
dev_err(&info->pdev->dev,
"failed to register extcon notifier for DCP %d\n", ret);
extcon_unregister_notifier(info->cable.edev,
EXTCON_CHG_USB_SDP, &info->cable.nb);
extcon_unregister_notifier(info->cable.edev,
EXTCON_CHG_USB_CDP, &info->cable.nb);
return ret;
}
platform_set_drvdata(pdev, info);
mutex_init(&info->lock);
/* Register with power supply class */
charger_cfg.drv_data = info;
info->psy_usb = power_supply_register(&pdev->dev, &axp288_charger_desc,
&charger_cfg);
if (IS_ERR(info->psy_usb)) {
dev_err(&pdev->dev, "failed to register power supply charger\n");
ret = PTR_ERR(info->psy_usb);
goto psy_reg_failed;
}
/* Register for OTG notification */
INIT_WORK(&info->otg.work, axp288_charger_otg_evt_worker);
info->otg.id_nb.notifier_call = axp288_charger_handle_otg_evt;
ret = extcon_register_notifier(info->otg.cable, EXTCON_USB_HOST,
&info->otg.id_nb);
if (ret)
dev_warn(&pdev->dev, "failed to register otg notifier\n");
if (info->otg.cable)
info->otg.id_short = extcon_get_cable_state_(
info->otg.cable, EXTCON_USB_HOST);
/* Register charger interrupts */
for (i = 0; i < CHRG_INTR_END; i++) {
pirq = platform_get_irq(info->pdev, i);
info->irq[i] = regmap_irq_get_virq(info->regmap_irqc, pirq);
if (info->irq[i] < 0) {
dev_warn(&info->pdev->dev,
"failed to get virtual interrupt=%d\n", pirq);
ret = info->irq[i];
goto intr_reg_failed;
}
ret = devm_request_threaded_irq(&info->pdev->dev, info->irq[i],
//.........这里部分代码省略.........
开发者ID:acton393，项目名称:linux，代码行数:101，代码来源:axp288_charger.c
示例9: diagfwd_runtime_resume
static int diagfwd_runtime_resume(struct device *dev)
{
dev_dbg(dev, "pm_runtime: resuming...\n");
return 0;
}
开发者ID:CL0SeY，项目名称:i957kernel，代码行数:5，代码来源:diagfwd.c
示例10: davinci_vc_probe
static int __init davinci_vc_probe(struct platform_device *pdev)
{
struct davinci_vc *davinci_vc;
struct resource *res, *mem;
struct mfd_cell *cell = NULL;
int ret;
davinci_vc = kzalloc(sizeof(struct davinci_vc), GFP_KERNEL);
if (!davinci_vc) {
dev_dbg(&pdev->dev,
"could not allocate memory for private data\n");
return -ENOMEM;
}
davinci_vc->clk = clk_get(&pdev->dev, NULL);
if (IS_ERR(davinci_vc->clk)) {
dev_dbg(&pdev->dev,
"could not get the clock for voice codec\n");
ret = -ENODEV;
goto fail1;
}
clk_enable(davinci_vc->clk);
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
dev_err(&pdev->dev, "no mem resource\n");
ret = -ENODEV;
goto fail2;
}
davinci_vc->pbase = res->start;
davinci_vc->base_size = resource_size(res);
mem = request_mem_region(davinci_vc->pbase, davinci_vc->base_size,
pdev->name);
if (!mem) {
dev_err(&pdev->dev, "VCIF region already claimed\n");
ret = -EBUSY;
goto fail2;
}
davinci_vc->base = ioremap(davinci_vc->pbase, davinci_vc->base_size);
if (!davinci_vc->base) {
dev_err(&pdev->dev, "can't ioremap mem resource.\n");
ret = -ENOMEM;
goto fail3;
}
res = platform_get_resource(pdev, IORESOURCE_DMA, 0);
if (!res) {
dev_err(&pdev->dev, "no DMA resource\n");
ret = -ENXIO;
goto fail4;
}
davinci_vc->davinci_vcif.dma_tx_channel = res->start;
davinci_vc->davinci_vcif.dma_tx_addr =
(dma_addr_t)(io_v2p(davinci_vc->base) + DAVINCI_VC_WFIFO);
res = platform_get_resource(pdev, IORESOURCE_DMA, 1);
if (!res) {
dev_err(&pdev->dev, "no DMA resource\n");
ret = -ENXIO;
goto fail4;
}
davinci_vc->davinci_vcif.dma_rx_channel = res->start;
davinci_vc->davinci_vcif.dma_rx_addr =
(dma_addr_t)(io_v2p(davinci_vc->base) + DAVINCI_VC_RFIFO);
davinci_vc->dev = &pdev->dev;
davinci_vc->pdev = pdev;
/* Voice codec interface client */
cell = &davinci_vc->cells[DAVINCI_VC_VCIF_CELL];
cell->name = "davinci-vcif";
cell->mfd_data = davinci_vc;
/* Voice codec CQ93VC client */
cell = &davinci_vc->cells[DAVINCI_VC_CQ93VC_CELL];
cell->name = "cq93vc-codec";
cell->mfd_data = davinci_vc;
ret = mfd_add_devices(&pdev->dev, pdev->id, davinci_vc->cells,
DAVINCI_VC_CELLS, NULL, 0);
if (ret != 0) {
dev_err(&pdev->dev, "fail to register client devices\n");
goto fail4;
}
return 0;
fail4:
iounmap(davinci_vc->base);
fail3:
release_mem_region(davinci_vc->pbase, davinci_vc->base_size);
fail2:
clk_disable(davinci_vc->clk);
clk_put(davinci_vc->clk);
davinci_vc->clk = NULL;
//.........这里部分代码省略.........
开发者ID:ARMP，项目名称:android_kernel_lge_x3，代码行数:101，代码来源:davinci_voicecodec.c
示例11: diagfwd_runtime_suspend
static int diagfwd_runtime_suspend(struct device *dev)
{
dev_dbg(dev, "pm_runtime: suspending...\n");
return 0;
}
开发者ID:CL0SeY，项目名称:i957kernel，代码行数:5，代码来源:diagfwd.c
示例12: mei_reset
/**
* mei_reset - resets host and fw.
*
* @dev: the device structure
*
* Return: 0 on success or < 0 if the reset hasn't succeeded
*/
int mei_reset(struct mei_device *dev)
{
enum mei_dev_state state = dev->dev_state;
bool interrupts_enabled;
int ret;
if (state != MEI_DEV_INITIALIZING &&
state != MEI_DEV_DISABLED &&
state != MEI_DEV_POWER_DOWN &&
state != MEI_DEV_POWER_UP) {
char fw_sts_str[MEI_FW_STATUS_STR_SZ];
mei_fw_status_str(dev, fw_sts_str, MEI_FW_STATUS_STR_SZ);
dev_warn(dev->dev, "unexpected reset: dev_state = %s fw status = %s\n",
mei_dev_state_str(state), fw_sts_str);
}
mei_clear_interrupts(dev);
/* we're already in reset, cancel the init timer
* if the reset was called due the hbm protocol error
* we need to call it before hw start
* so the hbm watchdog won't kick in
*/
mei_hbm_idle(dev);
/* enter reset flow */
interrupts_enabled = state != MEI_DEV_POWER_DOWN;
dev->dev_state = MEI_DEV_RESETTING;
dev->reset_count++;
if (dev->reset_count > MEI_MAX_CONSEC_RESET) {
dev_err(dev->dev, "reset: reached maximal consecutive resets: disabling the device\n");
dev->dev_state = MEI_DEV_DISABLED;
return -ENODEV;
}
ret = mei_hw_reset(dev, interrupts_enabled);
/* fall through and remove the sw state even if hw reset has failed */
/* no need to clean up software state in case of power up */
if (state != MEI_DEV_INITIALIZING && state != MEI_DEV_POWER_UP)
mei_cl_all_disconnect(dev);
mei_hbm_reset(dev);
memset(dev->rd_msg_hdr, 0, sizeof(dev->rd_msg_hdr));
if (ret) {
dev_err(dev->dev, "hw_reset failed ret = %d\n", ret);
return ret;
}
if (state == MEI_DEV_POWER_DOWN) {
dev_dbg(dev->dev, "powering down: end of reset\n");
dev->dev_state = MEI_DEV_DISABLED;
return 0;
}
ret = mei_hw_start(dev);
if (ret) {
dev_err(dev->dev, "hw_start failed ret = %d\n", ret);
return ret;
}
dev_dbg(dev->dev, "link is established start sending messages.\n");
dev->dev_state = MEI_DEV_INIT_CLIENTS;
ret = mei_hbm_start_req(dev);
if (ret) {
dev_err(dev->dev, "hbm_start failed ret = %d\n", ret);
dev->dev_state = MEI_DEV_RESETTING;
return ret;
}
return 0;
}
开发者ID:AlexShiLucky，项目名称:linux，代码行数:84，代码来源:init.c
示例13: ps3_ehci_probe
static int __devinit ps3_ehci_probe(struct ps3_system_bus_device *dev)
{
int result;
struct usb_hcd *hcd;
unsigned int virq;
static u64 dummy_mask = DMA_BIT_MASK(32);
if (usb_disabled()) {
result = -ENODEV;
goto fail_start;
}
result = ps3_open_hv_device(dev);
if (result) {
dev_dbg(&dev->core, "%s:%d: ps3_open_hv_device failed\n",
__func__, __LINE__);
goto fail_open;
}
result = ps3_dma_region_create(dev->d_region);
if (result) {
dev_dbg(&dev->core, "%s:%d: ps3_dma_region_create failed: "
"(%d)\n", __func__, __LINE__, result);
BUG_ON("check region type");
goto fail_dma_region;
}
result = ps3_mmio_region_create(dev->m_region);
if (result) {
dev_dbg(&dev->core, "%s:%d: ps3_map_mmio_region failed\n",
__func__, __LINE__);
result = -EPERM;
goto fail_mmio_region;
}
dev_dbg(&dev->core, "%s:%d: mmio mapped_addr %lxh\n", __func__,
__LINE__, dev->m_region->lpar_addr);
result = ps3_io_irq_setup(PS3_BINDING_CPU_ANY, dev->interrupt_id, &virq);
if (result) {
dev_dbg(&dev->core, "%s:%d: ps3_construct_io_irq(%d) failed.\n",
__func__, __LINE__, virq);
result = -EPERM;
goto fail_irq;
}
dev->core.dma_mask = &dummy_mask; /* FIXME: for improper usb code */
hcd = usb_create_hcd(&ps3_ehci_hc_driver, &dev->core, dev_name(&dev->core));
if (!hcd) {
dev_dbg(&dev->core, "%s:%d: usb_create_hcd failed\n", __func__,
__LINE__);
result = -ENOMEM;
goto fail_create_hcd;
}
hcd->rsrc_start = dev->m_region->lpar_addr;
hcd->rsrc_len = dev->m_region->len;
if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name))
dev_dbg(&dev->core, "%s:%d: request_mem_region failed\n",
__func__, __LINE__);
hcd->regs = ioremap(dev->m_region->lpar_addr, dev->m_region->len);
if (!hcd->regs) {
dev_dbg(&dev->core, "%s:%d: ioremap failed\n", __func__,
__LINE__);
result = -EPERM;
goto fail_ioremap;
}
dev_dbg(&dev->core, "%s:%d: hcd->rsrc_start %lxh\n", __func__, __LINE__,
(unsigned long)hcd->rsrc_start);
dev_dbg(&dev->core, "%s:%d: hcd->rsrc_len %lxh\n", __func__, __LINE__,
(unsigned long)hcd->rsrc_len);
dev_dbg(&dev->core, "%s:%d: hcd->regs %lxh\n", __func__, __LINE__,
(unsigned long)hcd->regs);
dev_dbg(&dev->core, "%s:%d: virq %lu\n", __func__, __LINE__,
(unsigned long)virq);
ps3_system_bus_set_drvdata(dev, hcd);
result = usb_add_hcd(hcd, virq, 0);
if (result) {
dev_dbg(&dev->core, "%s:%d: usb_add_hcd failed (%d)\n",
__func__, __LINE__, result);
goto fail_add_hcd;
}
return result;
fail_add_hcd:
iounmap(hcd->regs);
//.........这里部分代码省略.........
开发者ID:0xroot，项目名称:Blackphone-BP1-Kernel，代码行数:101，代码来源:ehci-ps3.c
示例14: nbd_send_cmd
/* always call with the tx_lock held */
static int nbd_send_cmd(struct nbd_device *nbd, struct nbd_cmd *cmd)
{
struct request *req = blk_mq_rq_from_pdu(cmd);
int result, flags;
struct nbd_request request;
unsigned long size = blk_rq_bytes(req);
u32 type;
if (req->cmd_type == REQ_TYPE_DRV_PRIV)
type = NBD_CMD_DISC;
else if (req_op(req) == REQ_OP_DISCARD)
type = NBD_CMD_TRIM;
else if (req_op(req) == REQ_OP_FLUSH)
type = NBD_CMD_FLUSH;
else if (rq_data_dir(req) == WRITE)
type = NBD_CMD_WRITE;
else
type = NBD_CMD_READ;
memset(&request, 0, sizeof(request));
request.magic = htonl(NBD_REQUEST_MAGIC);
request.type = htonl(type);
if (type != NBD_CMD_FLUSH && type != NBD_CMD_DISC) {
request.from = cpu_to_be64((u64)blk_rq_pos(req) << 9);
request.len = htonl(size);
}
memcpy(request.handle, &req->tag, sizeof(req->tag));
dev_dbg(nbd_to_dev(nbd), "request %p: sending control (%[email protected]%llu,%uB)\n",
cmd, nbdcmd_to_ascii(type),
(unsigned long long)blk_rq_pos(req) << 9, blk_rq_bytes(req));
result = sock_xmit(nbd, 1, &request, sizeof(request),
(type == NBD_CMD_WRITE) ? MSG_MORE : 0);
if (result <= 0) {
dev_err(disk_to_dev(nbd->disk),
"Send control failed (result %d)\n", result);
return -EIO;
}
if (type == NBD_CMD_WRITE) {
struct req_iterator iter;
struct bio_vec bvec;
/*
* we are really probing at internals to determine
* whether to set MSG_MORE or not...
*/
rq_for_each_segment(bvec, req, iter) {
flags = 0;
if (!rq_iter_last(bvec, iter))
flags = MSG_MORE;
dev_dbg(nbd_to_dev(nbd), "request %p: sending %d bytes data\n",
cmd, bvec.bv_len);
result = sock_send_bvec(nbd, &bvec, flags);
if (result <= 0) {
dev_err(disk_to_dev(nbd->disk),
"Send data failed (result %d)\n",
result);
return -EIO;
}
}
}
开发者ID:ivecera，项目名称:linux-odroid，代码行数:62，代码来源:nbd.c
示例15: sharpsl_battery_thread
static void sharpsl_battery_thread(struct work_struct *private_)
{
int voltage, percent, apm_status, i = 0;
if (!sharpsl_pm.machinfo)
return;
sharpsl_pm.battstat.ac_status = (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN) ? APM_AC_ONLINE : APM_AC_OFFLINE);
/* Corgi cannot confirm when battery fully charged so periodically kick! */
if (!sharpsl_pm.machinfo->batfull_irq && (sharpsl_pm.charge_mode == CHRG_ON)
&& time_after(jiffies, sharpsl_pm.charge_start_time + SHARPSL_CHARGE_ON_TIME_INTERVAL))
schedule_delayed_work(&toggle_charger, 0);
while(1) {
voltage = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT);
if (voltage > 0) break;
if (i++ > 5) {
voltage = sharpsl_pm.machinfo->bat_levels_noac[0].voltage;
dev_warn(sharpsl_pm.dev, "Warning: Cannot read main battery!\n");
break;
}
}
voltage = sharpsl_average_value(voltage);
apm_status = get_apm_status(voltage);
percent = get_percentage(voltage);
/* At low battery voltages, the voltage has a tendency to start
creeping back up so we try to avoid this here */
if ((sharpsl_pm.battstat.ac_status == APM_AC_ONLINE) || (apm_status == APM_BATTERY_STATUS_HIGH) || percent <= sharpsl_pm.battstat.mainbat_percent) {
sharpsl_pm.battstat.mainbat_voltage = voltage;
sharpsl_pm.battstat.mainbat_status = apm_status;
sharpsl_pm.battstat.mainbat_percent = percent;
}
dev_dbg(sharpsl_pm.dev, "Battery: voltage: %d, status: %d, percentage: %d, time: %ld\n", voltage,
sharpsl_pm.battstat.mainbat_status, sharpsl_pm.battstat.mainbat_percent, jiffies);
#ifdef CONFIG_BACKLIGHT_CORGI
/* If battery is low. limit backlight intensity to save power. */
if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE)
&& ((sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_LOW) ||
(sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL))) {
if (!(sharpsl_pm.flags & SHARPSL_BL_LIMIT)) {
sharpsl_pm.machinfo->backlight_limit(1);
sharpsl_pm.flags |= SHARPSL_BL_LIMIT;
}
} else if (sharpsl_pm.flags & SHARPSL_BL_LIMIT) {
sharpsl_pm.machinfo->backlight_limit(0);
sharpsl_pm.flags &= ~SHARPSL_BL_LIMIT;
}
#endif
/* Suspend if critical battery level */
if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE)
&& (sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL)
&& !(sharpsl_pm.flags & SHARPSL_APM_QUEUED)) {
sharpsl_pm.flags |= SHARPSL_APM_QUEUED;
dev_err(sharpsl_pm.dev, "Fatal Off\n");
apm_queue_event(APM_CRITICAL_SUSPEND);
}
schedule_delayed_work(&sharpsl_bat, SHARPSL_BATCHK_TIME);
}
开发者ID:8497165，项目名称:JetKernel，代码行数:66，代码来源:sharpsl_pm.c
示例16: arizona_runtime_resume
static int arizona_runtime_resume(struct device *dev)
{
struct arizona *arizona = dev_get_drvdata(dev);
int ret;
dev_dbg(arizona->dev, "Leaving AoD mode\n");
ret = regulator_enable(arizona->dcvdd);
if (ret != 0) {
dev_err(arizona->dev, "Failed to enable DCVDD: %d\n", ret);
return ret;
}
regcache_cache_only(arizona->regmap, false);
switch (arizona->type) {
case WM5102:
if (arizona->external_dcvdd) {
ret = regmap_update_bits(arizona->regmap,
ARIZONA_ISOLATION_CONTROL,
ARIZONA_ISOLATE_DCVDD1, 0);
if (ret != 0) {
dev_err(arizona->dev,
"Failed to connect DCVDD: %d\n", ret);
goto err;
}
}
ret = wm5102_patch(arizona);
if (ret != 0) {
dev_err(arizona->dev, "Failed to apply patch: %d\n",
ret);
goto err;
}
ret = arizona_apply_hardware_patch(arizona);
if (ret != 0) {
dev_err(arizona->dev,
"Failed to apply hardware patch: %d\n",
ret);
goto err;
}
break;
default:
ret = arizona_wait_for_boot(arizona);
if (ret != 0) {
goto err;
}
if (arizona->external_dcvdd) {
ret = regmap_update_bits(arizona->regmap,
ARIZONA_ISOLATION_CONTROL,
ARIZONA_ISOLATE_DCVDD1, 0);
if (ret != 0) {
dev_err(arizona->dev,
"Failed to connect DCVDD: %d\n", ret);
goto err;
}
}
break;
}
switch (arizona->type) {
case WM5102:
ret = wm5102_patch(arizona);
if (ret != 0) {
dev_err(arizona->dev, "Failed to apply patch: %d\n",
ret);
goto err;
}
default:
break;
}
ret = regcache_sync(arizona->regmap);
if (ret != 0) {
dev_err(arizona->dev, "Failed to restore register cache\n");
goto err;
}
return 0;
err:
regcache_cache_only(arizona->regmap, true);
regulator_disable(arizona->dcvdd);
return ret;
}
开发者ID:AnadoluPanteri，项目名称:kernel-plus-harmattan，代码行数:87，代码来源:arizona-core.c
示例17: sharpsl_off_charge_battery
/*
* Charging Control while suspended
* Return 1 - go straight to sleep
* Return 0 - sleep or wakeup depending on other factors
*/
static int sharpsl_off_charge_battery(void)
{
int time;
dev_dbg(sharpsl_pm.dev, "Charge Mode: %d\n", sharpsl_pm.charge_mode);
if (sharpsl_pm.charge_mode == CHRG_OFF) {
dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 1\n");
/* AC Check */
if ((sharpsl_ac_check() < 0) || (sharpsl_check_battery_temp() < 0))
return sharpsl_off_charge_error();
/* Start Charging */
sharpsl_pm_led(SHARPSL_LED_ON);
sharpsl_pm.machinfo->charge(0);
mdelay(SHARPSL_CHARGE_WAIT_TIME);
sharpsl_pm.machinfo->charge(1);
sharpsl_pm.charge_mode = CHRG_ON;
sharpsl_pm.full_count = 0;
return 1;
} else if (sharpsl_pm.charge_mode != CHRG_ON) {
return 1;
}
if (sharpsl_pm.full_count == 0) {
int time;
dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 2\n");
if ((sharpsl_check_battery_temp() < 0) || (sharpsl_check_battery_voltage() < 0))
return sharpsl_off_charge_error();
sharpsl_pm.machinfo->charge(0);
mdelay(SHARPSL_CHARGE_WAIT_TIME);
sharpsl_pm.machinfo->charge(1);
sharpsl_pm.charge_mode = CHRG_ON;
mdelay(SHARPSL_CHARGE_CO_CHECK_TIME);
time = RCNR;
while(1) {
/* Check if any wakeup event had occurred */
if (sharpsl_pm.machinfo->charger_wakeup() != 0)
return 0;
/* Check for timeout */
if ((RCNR - time) > SHARPSL_WAIT_CO_TIME)
return 1;
if (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_CHRGFULL)) {
dev_dbg(sharpsl_pm.dev, "Offline Charger: Charge full occurred. Retrying to check\n");
sharpsl_pm.full_count++;
sharpsl_pm.machinfo->charge(0);
mdelay(SHARPSL_CHARGE_WAIT_TIME);
sharpsl_pm.machinfo->charge(1);
return 1;
}
}
}
dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 3\n");
mdelay(SHARPSL_CHARGE_CO_CHECK_TIME);
time = RCNR;
while(1) {
/* Check if any wakeup event had occurred */
if (sharpsl_pm.machinfo->charger_wakeup() != 0)
return 0;
/* Check for timeout */
if ((RCNR-time) > SHARPSL_WAIT_CO_TIME) {
if (sharpsl_pm.full_count > SHARPSL_CHARGE_RETRY_CNT) {
dev_dbg(sharpsl_pm.dev, "Offline Charger: Not charged sufficiently. Retrying.\n");
sharpsl_pm.full_count = 0;
}
sharpsl_pm.full_count++;
return 1;
}
if (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_CHRGFULL)) {
dev_dbg(sharpsl_pm.dev, "Offline Charger: Charging complete.\n");
sharpsl_pm_led(SHARPSL_LED_OFF);
sharpsl_pm.machinfo->charge(0);
sharpsl_pm.charge_mode = CHRG_DONE;
return 1;
}
}
}
开发者ID:8497165，项目名称:JetKernel，代码行数:93，代码来源:sharpsl_pm.c
示例18: synquacer_i2c_isr
|
客服电话
APP下载
官方微信
请发表评论