• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号
登陆 注册

C++ bus_space_write_2函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中bus_space_write_2函数的典型用法代码示例。如果您正苦于以下问题：C++ bus_space_write_2函数的具体用法？C++ bus_space_write_2怎么用？C++ bus_space_write_2使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了bus_space_write_2函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: le_pci_wrcsr

static void
le_pci_wrcsr(struct lance_softc *sc, uint16_t port, uint16_t val)
{
	struct le_pci_softc *lesc = (struct le_pci_softc *)sc;

	bus_space_write_2(lesc->sc_regt, lesc->sc_regh, PCNET_PCI_RAP, port);
	bus_space_barrier(lesc->sc_regt, lesc->sc_regh, PCNET_PCI_RAP, 2,
	    BUS_SPACE_BARRIER_WRITE);
	bus_space_write_2(lesc->sc_regt, lesc->sc_regh, PCNET_PCI_RDP, val);
}
开发者ID:AhmadTux，项目名称:DragonFlyBSD，代码行数:10，代码来源:if_lnc_pci.c


示例2: sf256pcs_rset

void
sf256pcs_rset(bus_space_tag_t iot, bus_space_handle_t ioh,
    bus_size_t offset, u_int32_t d)
{
	d  = FM_IO_GPIO(FM_IO_PIN1 | FM_IO_PIN2 | FM_IO_PIN3);
	d |= PCS_WREN_OFF | PCS_DATA_OFF | PCS_CLOCK_OFF;

	bus_space_write_2(iot, ioh, offset, d);
	bus_space_write_2(iot, ioh, offset, d);
}
开发者ID:repos-holder，项目名称:openbsd-patches，代码行数:10，代码来源:fmsradio.c


示例3: imxuart_start

void
imxuart_start(struct tty *tp)
{
        struct imxuart_softc *sc = imxuart_cd.cd_devs[DEVUNIT(tp->t_dev)];
	bus_space_tag_t iot = sc->sc_iot;
	bus_space_handle_t ioh = sc->sc_ioh;

	int s;
	s = spltty();
	if (ISSET(tp->t_state, TS_BUSY)) {
		splx(s);
		return;
	}
	if (ISSET(tp->t_state, TS_TIMEOUT | TS_TTSTOP))
		goto stopped;
#ifdef DAMNFUCKSHIT
	/* clear to send (IE the RTS pin on this shit) is not directly \
	 * readable - skip check for now
	 */
	if (ISSET(tp->t_cflag, CRTSCTS) && !ISSET(sc->sc_msr, IMXUART_CTS))
		goto stopped;
#endif
	if (tp->t_outq.c_cc <= tp->t_lowat) {
		if (ISSET(tp->t_state, TS_ASLEEP)) {
			CLR(tp->t_state, TS_ASLEEP);
			wakeup(&tp->t_outq);
		}
		if (tp->t_outq.c_cc == 0)
			goto stopped;
		selwakeup(&tp->t_wsel);
	}
	SET(tp->t_state, TS_BUSY);

	if (!ISSET(sc->sc_ucr1, IMXUART_CR1_TXMPTYEN)) {
		SET(sc->sc_ucr1, IMXUART_CR1_TXMPTYEN);
		bus_space_write_2(iot, ioh, IMXUART_UCR1, sc->sc_ucr1);
	}

	{
		u_char buf[32];
		int n = q_to_b(&tp->t_outq, buf, 32/*XXX*/);
		int i;
		for (i = 0; i < n; i++)
			bus_space_write_1(iot, ioh, IMXUART_UTXD, buf[i]);
	}
	splx(s);
	return;
stopped:
	if (ISSET(sc->sc_ucr1, IMXUART_CR1_TXMPTYEN)) {
		CLR(sc->sc_ucr1, IMXUART_CR1_TXMPTYEN);
		bus_space_write_2(iot, ioh, IMXUART_UCR1, sc->sc_ucr1);
	}
	splx(s);
}
开发者ID:ajinkya93，项目名称:OpenBSD，代码行数:54，代码来源:imxuart.c


示例4: fms_reset_codec

/* Cold Reset */
static int
fms_reset_codec(void *addr)
{
	struct fms_softc *sc;

	sc = addr;
	bus_space_write_2(sc->sc_iot, sc->sc_ioh, FM_CODEC_CTL, 0x0020);
	delay(2);
	bus_space_write_2(sc->sc_iot, sc->sc_ioh, FM_CODEC_CTL, 0x0000);
	delay(1);
	return 0;
}
开发者ID:RyanLucchese，项目名称:rumpkernel-netbsd-src，代码行数:13，代码来源:fms.c


示例5: depca_isa_probe

int
depca_isa_probe(struct device *parent, struct cfdata *match, void *aux)
{
	struct isa_attach_args *ia = aux;
	bus_space_tag_t iot = ia->ia_iot;
	bus_space_handle_t ioh;
	bus_space_handle_t memh;
	int rv = 0;

	/* Disallow impossible i/o address. */
	if (ia->ia_iobase != 0x200 && ia->ia_iobase != 0x300)
		return (0);

	/* Map i/o space. */
	if (bus_space_map(iot, ia->ia_iobase, 16, 0, &ioh))
		return 0;

	if (ia->ia_maddr == MADDRUNK ||
	    (ia->ia_msize != 32*1024 && ia->ia_msize != 64*1024))
		goto bad;

	/* Map card RAM. */
	if (bus_space_map(ia->ia_memt, ia->ia_maddr, ia->ia_msize, 0, &memh))
		goto bad;

	/* Just needed to check mapability; don't need it anymore. */
	bus_space_unmap(ia->ia_memt, memh, ia->ia_msize);

	/* Stop the LANCE chip and put it in a known state. */
	bus_space_write_2(iot, ioh, DEPCA_RAP, LE_CSR0);
	bus_space_write_2(iot, ioh, DEPCA_RDP, LE_C0_STOP);
	delay(100);

	bus_space_write_2(iot, ioh, DEPCA_RAP, LE_CSR0);
	if (bus_space_read_2(iot, ioh, DEPCA_RDP) != LE_C0_STOP)
		goto bad;

	bus_space_write_2(iot, ioh, DEPCA_RAP, LE_CSR3);
	bus_space_write_2(iot, ioh, DEPCA_RDP, LE_C3_ACON);

	bus_space_write_1(iot, ioh, DEPCA_CSR, DEPCA_CSR_DUM);

	if (depca_readprom(iot, ioh, NULL))
		goto bad;

	ia->ia_iosize = 16;
	rv = 1;

 bad:
	bus_space_unmap(iot, ioh, 16);
	return (rv);
}
开发者ID:MarginC，项目名称:kame，代码行数:52，代码来源:depca_isa.c


示例6: geodesc_attach

void
geodesc_attach(struct device *parent, struct device *self, void *aux)
{
	struct geodesc_softc *sc = (void *) self;
	struct pci_attach_args *pa = aux;
	uint16_t cnfg, cba;
	uint8_t sts, rev, iid;
	pcireg_t reg;
	extern void (*cpuresetfn)(void);

	reg = pci_conf_read(pa->pa_pc, pa->pa_tag, SC1100_F5_SCRATCHPAD);
	sc->sc_iot = pa->pa_iot;
	if (reg == 0 ||
	    bus_space_map(sc->sc_iot, reg, 64, 0, &sc->sc_ioh)) {
		printf(": unable to map registers at 0x%x\n", reg);
		return;
	}
	cba = bus_space_read_2(sc->sc_iot, sc->sc_ioh, GCB_CBA);
	if (cba != reg) {
		printf(": cba mismatch: cba 0x%x != reg 0x%x\n", cba, reg);
		bus_space_unmap(sc->sc_iot, sc->sc_ioh, 64);
		return;
	}
	sts = bus_space_read_1(sc->sc_iot, sc->sc_ioh, GCB_WDSTS);
	cnfg = bus_space_read_2(sc->sc_iot, sc->sc_ioh, GCB_WDCNFG);
	iid = bus_space_read_1(sc->sc_iot, sc->sc_ioh, GCB_IID);
	rev = bus_space_read_1(sc->sc_iot, sc->sc_ioh, GCB_REV);

	printf(": iid %d revision %d wdstatus %b\n", iid, rev, sts, WDSTSBITS);

#ifndef SMALL_KERNEL
	/* setup and register watchdog */
	bus_space_write_2(sc->sc_iot, sc->sc_ioh, GCB_WDTO, 0);
	sts |= WDOVF_CLEAR;
	bus_space_write_1(sc->sc_iot, sc->sc_ioh, GCB_WDSTS, sts);
	cnfg &= ~WDCNFG_MASK;
	cnfg |= WDTYPE1_RESET|WDPRES_DIV_512;
	bus_space_write_2(sc->sc_iot, sc->sc_ioh, GCB_WDCNFG, cnfg);

	wdog_register(sc, geodesc_wdogctl_cb);
#endif /* SMALL_KERNEL */

#ifdef __HAVE_TIMECOUNTER
	bus_space_write_4(sc->sc_iot, sc->sc_ioh, GCB_TSCNFG, TSC_ENABLE);
	/* Hook into the kern_tc */
	geodesc_timecounter.tc_priv = sc;
	tc_init(&geodesc_timecounter);
#endif /* __HAVE_TIMECOUNTER */

	/* We have a special way to reset the CPU on the SC1100 */
	cpuresetfn = sc1100_sysreset;
}
开发者ID:alenichev，项目名称:openbsd-kernel，代码行数:52，代码来源:geodesc.c


示例7: sf256pcpr_write_bit

void
sf256pcpr_write_bit(bus_space_tag_t iot, bus_space_handle_t ioh,
    bus_size_t off, int bit)
{
	u_int16_t data, wren;

	wren  = FM_IO_GPIO_ALL | FM_IO_GPIO_IN(FM_IO_PIN3) | PCPR_WREN_ON;
	data = bit ? PCPR_DATA_ON : PCPR_DATA_OFF;

	bus_space_write_2(iot, ioh, off, PCPR_CLOCK_OFF | wren | data);
	bus_space_write_2(iot, ioh, off, PCPR_CLOCK_ON  | wren | data);
	bus_space_write_2(iot, ioh, off, PCPR_CLOCK_OFF | wren | data);
}
开发者ID:repos-holder，项目名称:openbsd-patches，代码行数:13，代码来源:fmsradio.c


示例8: icp_mpr_copy_cmd

void
icp_mpr_copy_cmd(struct icp_softc *icp, struct icp_ccb *ic)
{

	bus_space_write_2(icp->icp_dpmemt, icp->icp_dpmemh,
	    ICP_MPR_IC + ICP_COMM_QUEUE + 0 * ICP_COMM_Q_SZ + ICP_OFFSET,
	    ICP_DPR_CMD);
	bus_space_write_2(icp->icp_dpmemt, icp->icp_dpmemh,
	    ICP_MPR_IC + ICP_COMM_QUEUE + 0 * ICP_COMM_Q_SZ + ICP_SERV_ID,
	    ic->ic_service);
	bus_space_write_region_4(icp->icp_dpmemt, icp->icp_dpmemh,
	    ICP_MPR_IC + ICP_DPR_CMD, (u_int32_t *)&ic->ic_cmd,
	    ic->ic_cmdlen >> 2);
}
开发者ID:ryo，项目名称:netbsd-src，代码行数:14，代码来源:icp_pci.c


示例9: geode_attach

static int
geode_attach(device_t self)
{
	u_int32_t	reg;
	u_int16_t	cnfg, cba;
	u_int8_t	sts, rev, iid;

	/*
	 * The address of the CBA is written to this register
	 * by the bios, see p161 in data sheet.
	 */
	reg = pci_read_config(self, SC1100_F5_SCRATCHPAD, 4);
	if (reg == 0)
		return ENODEV;

	/* bus_space_map(sc->sc_iot, reg, 64, 0, &sc->sc_ioh)) */
	geode_sc.sc_iot = I386_BUS_SPACE_IO;
	geode_sc.sc_ioh = reg;

	cba = bus_space_read_2(geode_sc.sc_iot, geode_sc.sc_ioh, GCB_CBA);
	if (cba != reg) {
		kprintf("Geode LX: cba mismatch: cba 0x%x != reg 0x%x\n", cba, reg);
		return ENODEV;
	}

	/* outl(cba + 0x0d, 2); ??? */
	sts = bus_space_read_1(geode_sc.sc_iot, geode_sc.sc_ioh, GCB_WDSTS);
	cnfg = bus_space_read_2(geode_sc.sc_iot, geode_sc.sc_ioh, GCB_WDCNFG);
	iid = bus_space_read_1(geode_sc.sc_iot, geode_sc.sc_ioh, GCB_IID);
	rev = bus_space_read_1(geode_sc.sc_iot, geode_sc.sc_ioh, GCB_REV);
#define WDSTSBITS "\20\x04WDRST\x03WDSMI\x02WDINT\x01WDOVF"
	kprintf("Geode LX: iid %d revision %d wdstatus %b\n", iid, rev, sts, WDSTSBITS);

	/* enable timer */
	bus_space_write_4(geode_sc.sc_iot, geode_sc.sc_iot, GCB_TSCNFG, TSC_ENABLE);
	cputimer_register(&geode_timer);
	cputimer_select(&geode_timer, 0);

	/* enable watchdog and configure */
	bus_space_write_2(geode_sc.sc_iot, geode_sc.sc_ioh, GCB_WDTO, 0);
	sts |= WDOVF_CLEAR;
	bus_space_write_1(geode_sc.sc_iot, geode_sc.sc_ioh, GCB_WDSTS, sts);
	cnfg &= ~WDCNFG_MASK;
	cnfg |= WDTYPE1_RESET | WDPRES_DIV_512;
	bus_space_write_2(geode_sc.sc_iot, geode_sc.sc_ioh, GCB_WDCNFG, cnfg);
	wdog_register(&geode_wdog);

	return 0;
}
开发者ID:mihaicarabas，项目名称:dragonfly，代码行数:49，代码来源:geode.c


示例10: imxuartclose

int
imxuartclose(dev_t dev, int flag, int mode, struct proc *p)
{
	int unit = DEVUNIT(dev);
	struct imxuart_softc *sc = imxuart_cd.cd_devs[unit];
	bus_space_tag_t iot = sc->sc_iot;
	bus_space_handle_t ioh = sc->sc_ioh;
	struct tty *tp = sc->sc_tty;
	int s;

	/* XXX This is for cons.c. */
	if (!ISSET(tp->t_state, TS_ISOPEN))
		return 0;

	(*linesw[tp->t_line].l_close)(tp, flag, p);
	s = spltty();
	if (ISSET(tp->t_state, TS_WOPEN)) {
		/* tty device is waiting for carrier; drop dtr then re-raise */
		CLR(sc->sc_ucr3, IMXUART_CR3_DSR);
		bus_space_write_2(iot, ioh, IMXUART_UCR3, sc->sc_ucr3);
		timeout_add(&sc->sc_dtr_tmo, hz * 2);
	} else {
		/* no one else waiting; turn off the uart */
		imxuart_pwroff(sc);
	}
	CLR(tp->t_state, TS_BUSY | TS_FLUSH);

	sc->sc_cua = 0;
	splx(s);
	ttyclose(tp);

	return 0;
}
开发者ID:ajinkya93，项目名称:OpenBSD，代码行数:33，代码来源:imxuart.c


示例11: sun68k_bus_poke

int 
sun68k_bus_poke(bus_space_tag_t tag, bus_space_handle_t handle,
    bus_size_t offset, size_t size, uint32_t v)
{
	int result;
	label_t	faultbuf;
	
	nofault = &faultbuf; 
	if (setjmp(&faultbuf))
		result = -1;
	else {
		switch(size) {
		case 1:
			bus_space_write_1(tag, handle, offset, (uint8_t)v);
			break;
		case 2:
			bus_space_write_2(tag, handle, offset, (uint16_t)v);
			break;
		case 4:
			bus_space_write_4(tag, handle, offset, (uint32_t)v);
			break;
		default:
			panic("_bus_space_poke: bad size");
		}
		result = 0;
	}

	nofault = NULL;
	return (result);
}
开发者ID:yazshel，项目名称:netbsd-kernel，代码行数:30，代码来源:bus.c


示例12: fms_read_codec

static int
fms_read_codec(void *addr, uint8_t reg, uint16_t *val)
{
	struct fms_softc *sc;
	int i;

	sc = addr;
	/* Poll until codec is ready */
	for (i = 0; i < TIMO && bus_space_read_2(sc->sc_iot, sc->sc_ioh,
		 FM_CODEC_CMD) & FM_CODEC_CMD_BUSY; i++)
		delay(1);
	if (i >= TIMO) {
		printf("fms: codec busy\n");
		return 1;
	}

	/* Write register index, read access */
	bus_space_write_2(sc->sc_iot, sc->sc_ioh, FM_CODEC_CMD,
			  reg | FM_CODEC_CMD_READ);

	/* Poll until we have valid data */
	for (i = 0; i < TIMO && !(bus_space_read_2(sc->sc_iot, sc->sc_ioh,
		 FM_CODEC_CMD) & FM_CODEC_CMD_VALID); i++)
		delay(1);
	if (i >= TIMO) {
		printf("fms: no data from codec\n");
		return 1;
	}

	/* Read data */
	*val = bus_space_read_2(sc->sc_iot, sc->sc_ioh, FM_CODEC_DATA);
	return 0;
}
开发者ID:RyanLucchese，项目名称:rumpkernel-netbsd-src，代码行数:33，代码来源:fms.c


示例13: db_bus_write_cmd

void
db_bus_write_cmd(db_expr_t addr, bool have_addr, db_expr_t count,
    const char *modif)
{
	db_expr_t datum;
	bus_space_tag_t iot = &iobus_bs_tag; /* XXX */
	bus_space_handle_t ioh;

	if (!have_addr)
		db_error("target address must be specified");

	bus_space_map(iot, addr, 1, 0, &ioh);

	while (db_expression(&datum)) {
		switch (*modif) {
		case 'b':
			bus_space_write_1(iot, ioh, 0, datum);
			break;
		case '\0':
		case 'h':
			bus_space_write_2(iot, ioh, 0, datum);
			break;
		default:
			db_error("bad modifier");
		}
	}
	bus_space_unmap(iot, ioh, 1);
	db_skip_to_eol();
}
开发者ID:krytarowski，项目名称:netbsd-current-src-sys，代码行数:29，代码来源:db_machdep.c


示例14: virtio_write_device_config_2

void
virtio_write_device_config_2(struct virtio_softc *sc,
			     int index, uint16_t value)
{
	bus_space_write_2(sc->sc_iot, sc->sc_ioh,
			  sc->sc_config_offset + index, value);
}
开发者ID:arroway，项目名称:virtio_DragonFlyBSD，代码行数:7，代码来源:virtio.c


示例15: geode_wdog_reset

static void
geode_wdog_reset(struct geode_wdog_softc *sc)
{
	/* set countdown */ 
	bus_space_write_2(sc->sc_gcb_dev->sc_iot, sc->sc_gcb_dev->sc_ioh,
	    SC1100_GCB_WDTO, sc->sc_countdown);
}
开发者ID:lacombar，项目名称:netbsd-alc，代码行数:7，代码来源:geodewdg.c


示例16: qlw_write

void
qlw_write(struct qlw_softc *sc, bus_size_t offset, u_int16_t value)
{
	bus_space_write_2(sc->sc_iot, sc->sc_ioh, offset, value);
	bus_space_barrier(sc->sc_iot, sc->sc_ioh, offset, 2,
	    BUS_SPACE_BARRIER_READ | BUS_SPACE_BARRIER_WRITE);
}
开发者ID:DavidAlphaFox，项目名称:openbsd-kernel，代码行数:7，代码来源:qlw.c


示例17: bppopen

int
bppopen(dev_t dev, int flags, int mode, struct lwp *l)
{
	int unit = BPPUNIT(dev);
	struct bpp_softc *sc;
	struct lsi64854_softc *lsi;
	uint16_t irq;
	int s;

	if (unit >= bpp_cd.cd_ndevs)
		return ENXIO;
	sc = device_lookup_private(&bpp_cd, unit);

	if ((sc->sc_flags & (BPP_OPEN|BPP_XCLUDE)) == (BPP_OPEN|BPP_XCLUDE))
		return EBUSY;

	lsi = &sc->sc_lsi64854;

	/* Set default parameters */
	sc->sc_hwcurrent = sc->sc_hwdefault;
	s = splbpp();
	bpp_setparams(sc, &sc->sc_hwdefault);
	splx(s);

	/* Enable interrupts */
	irq = BPP_ERR_IRQ_EN;
	irq |= sc->sc_hwdefault.hw_irq;
	bus_space_write_2(lsi->sc_bustag, lsi->sc_regs, L64854_REG_ICR, irq);
	return 0;
}
开发者ID:Tommmster，项目名称:netbsd-avr32，代码行数:30，代码来源:bpp.c


示例18: agg_wrcodec

static int
agg_wrcodec(kobj_t obj, void *sc, int regno, u_int32_t data)
{
	unsigned t;
	struct agg_info *ess = sc;

	/* We have to wait for a SAFE time to write addr/data */
	for (t = 0; t < 20; t++) {
		if ((bus_space_read_1(ess->st, ess->sh, PORT_CODEC_STAT)
		    & CODEC_STAT_MASK) != CODEC_STAT_PROGLESS)
			break;
		DELAY(2);	/* 20.8us / 13 */
	}
	if (t == 20) {
		/* Timed out. Abort writing. */
		device_printf(ess->dev, "agg_wrcodec() PROGLESS timed out.\n");
		return -1;
	}

	bus_space_write_2(ess->st, ess->sh, PORT_CODEC_REG, data);
	bus_space_write_1(ess->st, ess->sh, PORT_CODEC_CMD,
	    CODEC_CMD_WRITE | regno);

	return 0;
}
开发者ID:MarginC，项目名称:kame，代码行数:25，代码来源:maestro.c


示例19: pcib_mbus_hw_cfgwrite

static void
pcib_mbus_hw_cfgwrite(struct pcib_mbus_softc *sc, u_int bus, u_int slot,
    u_int func, u_int reg, uint32_t data, int bytes)
{
	uint32_t addr, ca, cd;

	ca = (sc->sc_info->op_type != MV_TYPE_PCI) ?
	    PCIE_REG_CFG_ADDR : PCI_REG_CFG_ADDR;
	cd = (sc->sc_info->op_type != MV_TYPE_PCI) ?
	    PCIE_REG_CFG_DATA : PCI_REG_CFG_DATA;
	addr = PCI_CFG_ENA | PCI_CFG_BUS(bus) | PCI_CFG_DEV(slot) |
	    PCI_CFG_FUN(func) | PCI_CFG_PCIE_REG(reg);

	mtx_lock_spin(&pcicfg_mtx);
	bus_space_write_4(sc->sc_bst, sc->sc_bsh, ca, addr);

	switch (bytes) {
	case 1:
		bus_space_write_1(sc->sc_bst, sc->sc_bsh,
		    cd + (reg & 3), data);
		break;
	case 2:
		bus_space_write_2(sc->sc_bst, sc->sc_bsh,
		    cd + (reg & 2), htole16(data));
		break;
	case 4:
		bus_space_write_4(sc->sc_bst, sc->sc_bsh,
		    cd, htole32(data));
		break;
	}
	mtx_unlock_spin(&pcicfg_mtx);
}
开发者ID:DangerDexter，项目名称:FreeBSD-8.0-dyntick，代码行数:32，代码来源:mv_pci.c


示例20: bppintr

int
bppintr(void *arg)
{
	struct bpp_softc *sc = arg;
	struct lsi64854_softc *lsi = &sc->sc_lsi64854;
	uint16_t irq;

	/* First handle any possible DMA interrupts */
	if (lsi64854_pp_intr((void *)lsi) == -1)
		sc->sc_error = 1;

	irq = bus_space_read_2(lsi->sc_bustag, lsi->sc_regs, L64854_REG_ICR);
	/* Ack all interrupts */
	bus_space_write_2(lsi->sc_bustag, lsi->sc_regs, L64854_REG_ICR,
	    irq | BPP_ALLIRQ);

	DPRINTF(("%s: %x\n", __func__, irq));
	/* Did our device interrupt? */
	if ((irq & BPP_ALLIRQ) == 0)
		return 0;

	if ((sc->sc_flags & BPP_LOCKED) != 0)
		wakeup(sc);
	else if ((sc->sc_flags & BPP_WANT) != 0) {
		sc->sc_flags &= ~BPP_WANT;
		wakeup(sc->sc_buf);
	} else {
		selnotify(&sc->sc_wsel, 0, 0);
		if (sc->sc_asyncproc != NULL)
			softint_schedule(sc->sc_sih);
	}
	return 1;
}
开发者ID:Tommmster，项目名称:netbsd-avr32，代码行数:33，代码来源:bpp.c



注：本文中的bus_space_write_2函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花
握手
雷人
路过
鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
More+
上一篇：
C++ bus_space_write_4函数代码示例发布时间：2022-05-30
下一篇：
C++ bus_space_write_1函数代码示例发布时间：2022-05-30
热门推荐
More+
热门话题
More+
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服（服务时间 9:00～18:00）

在线QQ客服
地址：深圳市南山区西丽大学城创智工业园
电邮：jeky_zhao#qq.com
移动电话：139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap