• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号
登陆 注册

C++ RTMP_BBP_IO_WRITE8_BY_REG_ID函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中RTMP_BBP_IO_WRITE8_BY_REG_ID函数的典型用法代码示例。如果您正苦于以下问题：C++ RTMP_BBP_IO_WRITE8_BY_REG_ID函数的具体用法？C++ RTMP_BBP_IO_WRITE8_BY_REG_ID怎么用？C++ RTMP_BBP_IO_WRITE8_BY_REG_ID使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了RTMP_BBP_IO_WRITE8_BY_REG_ID函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: rtmp_bbp_set_mmps

static INT rtmp_bbp_set_mmps(struct _RTMP_ADAPTER *pAd, BOOLEAN ReduceCorePower)
{
	UCHAR bbp_val, org_val;
	
	RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &org_val);
	bbp_val = org_val;
	if (ReduceCorePower)
		bbp_val |= 0x04;
	else
		bbp_val &= ~0x04;

	if (bbp_val != org_val)
		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, bbp_val);

#ifdef RT6352
	if (IS_RT6352(pAd))
	{
		RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R95, &org_val);
		bbp_val = org_val;
		if (ReduceCorePower) {
			bbp_val &= ~(0x80); /* bit 7 */
		} else {
			if (pAd->Antenna.field.RxPath > 1)
				bbp_val |= 0x80;
		}
		if (bbp_val != org_val)
			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R95, bbp_val);
	}
#endif /* RT6352*/

	return TRUE;
}
开发者ID:pierce1234，项目名称:rt-n56u，代码行数:32，代码来源:rtmp_phy.c


示例2: rtmp_bbp_init

static INT rtmp_bbp_init(RTMP_ADAPTER *pAd)
{
	INT Index = 0;
	
	/* Read BBP register, make sure BBP is up and running before write new data*/
	if (rtmp_bbp_is_ready(pAd)== FALSE)
		return FALSE;

	Index = 0;

	/* Initialize BBP register to default value*/
	for (Index = 0; Index < NUM_BBP_REG_PARMS; Index++)
	{

#ifdef MICROWAVE_OVEN_SUPPORT
#endif /* MICROWAVE_OVEN_SUPPORT */

		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd,
				BBPRegTable[Index].Register,
				BBPRegTable[Index].Value);
	}

	/* re-config specific BBP registers for individual chip */
	if (pAd->chipCap.pBBPRegTable)
	{
		REG_PAIR *reg_list = pAd->chipCap.pBBPRegTable;
		
		for (Index = 0; Index < pAd->chipCap.bbpRegTbSize; Index++)
		{
			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd,
					reg_list[Index].Register,
					reg_list[Index].Value);
			DBGPRINT(RT_DEBUG_TRACE, ("BBP_R%d=0x%x\n", 
					reg_list[Index].Register, 
					reg_list[Index].Value));
		}
	}

	if (pAd->chipOps.AsicBbpInit != NULL)
		pAd->chipOps.AsicBbpInit(pAd);

	/*
		For rt2860E and after, init BBP_R84 with 0x19. This is for extension channel overlapping IOT.
		RT3090 should not program BBP R84 to 0x19, otherwise TX will block.
		3070/71/72,3090,3090A( are included in RT30xx),3572,3390
	*/
	if (((pAd->MACVersion & 0xffff) != 0x0101) &&
		!(IS_RT30xx(pAd)|| IS_RT3572(pAd) || IS_RT5390(pAd) || IS_RT5392(pAd) || IS_RT3290(pAd) || IS_MT7601(pAd) || IS_RT6352(pAd) || IS_MT76x2(pAd)))
		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R84, 0x19);


	if (pAd->MACVersion == 0x28600100)
	{
		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R69, 0x16);
		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R73, 0x12);
	}

	return TRUE;
	
}
开发者ID:Brainiarc7，项目名称:mtk-wifi-gpl，代码行数:60，代码来源:rtmp_phy.c


示例3: InitFrequencyCalibrationMode

/*
	Sometimes frequency will be shift we need to adjust it when
	the frequencey shift.
*/
VOID InitFrequencyCalibrationMode(PRTMP_ADAPTER pAd, UINT8 Mode)
{
	BBP_R179_STRUC BbpR179 = { {0}
	};
	BBP_R180_STRUC BbpR180 = { {0}
	};
	BBP_R182_STRUC BbpR182 = { {0}
	};

	// TODO: shiang-6590, fix me, I don't know which MODE0 yet for RT85592
	if (Mode == FREQ_CAL_INIT_MODE0) {
		/* Initialize the RX_END_STATUS (1, 5) for "Rx OFDM/CCK frequency offset report" */
		BbpR179.field.DataIndex1 = 1;
		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R179, BbpR179.byte);
		BbpR180.field.DataIndex2 = 5;
		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R180, BbpR180.byte);
		BbpR182.field.DataArray = BBP_R57;	/* Rx OFDM/CCK frequency offset report */
		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R182, BbpR182.byte);
	} else if (Mode == FREQ_CAL_INIT_MODE1) {
		/* Initialize the RX_END_STATUS (1, 3) for "Rx OFDM/CCK frequency offset report" */
		BbpR179.field.DataIndex1 = 1;
		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R179, BbpR179.byte);
		BbpR180.field.DataIndex2 = 3;
		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R180, BbpR180.byte);
		BbpR182.field.DataArray = BBP_R57;	/* Rx OFDM/CCK frequency offset report */
		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R182, BbpR182.byte);
	} else if (Mode == FREQ_CAL_INIT_MODE2) {
		/* Initialize the RX_END_STATUS (1) for "Rx OFDM/CCK frequency offset report" */
		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R142, 1);
		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R143, BBP_R57);	/* Rx OFDM/CCK frequency offset report */
	} else
		DBGPRINT(RT_DEBUG_ERROR,
			 ("%s:Unknow mode = %d\n", __FUNCTION__, Mode));
}
开发者ID:kernel-digger，项目名称:mt7601u，代码行数:38，代码来源:frq_cal.c


示例4: RT35xx_NICInitAsicFromEEPROM

VOID RT35xx_NICInitAsicFromEEPROM(
	IN PRTMP_ADAPTER		pAd)
{
	UCHAR bbpreg = 0;
	UCHAR RFValue = 0;


	if (IS_RT3572(pAd))
	{	
		/* enable DC filter*/
		if ((pAd->MACVersion & 0xffff) >= 0x0201)
		{
			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R103, 0xc0);
		}

		/* improve power consumption */
		RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R138, &bbpreg);
		if (pAd->Antenna.field.TxPath == 1)
		{
			/* turn off tx DAC_1			*/
			bbpreg = (bbpreg | 0x20);
		}

		if (pAd->Antenna.field.RxPath == 1)
		{
			/* turn off tx ADC_1*/
			bbpreg &= (~0x2);
		}
		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R138, bbpreg);

		if ((pAd->MACVersion & 0xffff) >= 0x0211)
		{
			RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R31, &bbpreg);
			bbpreg &= (~0x3);
			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R31, bbpreg);
		}

		/* TX_LO1_en*/
		RT30xxReadRFRegister(pAd, RF_R16, &RFValue);

		/* set RF_R16_bit[2:0] equal to EEPROM setting at 0x48h and the value should start from 2.*/
		/*if (pAd->TxMixerGain24G >= 2)*/
		{
			RFValue &= (~0x7);  /* clean bit [2:0]*/
			RFValue |= pAd->TxMixerGain24G;
		}
		RT30xxWriteRFRegister(pAd, RF_R16, RFValue);
	}
}
开发者ID:celeduc，项目名称:rt3572sta，代码行数:49，代码来源:rt35xx.c


示例5: rtmp_bbp_set_ctrlch

static INT rtmp_bbp_set_ctrlch(struct _RTMP_ADAPTER *pAd, UINT8 ext_ch)
{
	UCHAR val, old_val = 0;

	RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &old_val);
	val = old_val;
	switch (ext_ch)
	{
		case EXTCHA_BELOW:
			val |= (0x20);
			break;
		case EXTCHA_ABOVE:
		case EXTCHA_NONE:
			val &= (~0x20);
			break;
	}

	if (val != old_val)
		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, val);

#ifdef CONFIG_STA_SUPPORT
#ifdef RTMP_MAC_PCI
	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
	{
		pAd->StaCfg.BBPR3 = val;
	}
#endif /* RTMP_MAC_PCI */
#endif /* CONFIG_STA_SUPPORT */

	return TRUE;
}
开发者ID:pierce1234，项目名称:rt-n56u，代码行数:31，代码来源:rtmp_phy.c


示例6: rtmp_bbp_set_txdac

static INT rtmp_bbp_set_txdac(struct _RTMP_ADAPTER *pAd, INT tx_dac)
{
	UCHAR val, old_val = 0;

	
	RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R1, &old_val);
	val = old_val & (~0x18);
	switch (tx_dac)
	{
		case 2:
			val |= 0x10;
			break;
		case 1:
			val |= 0x08;
			break;
		case 0:
		default:
			break;
	}

	if (val != old_val) {
		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R1, val);
	}

	return TRUE;
}
开发者ID:pierce1234，项目名称:rt-n56u，代码行数:26，代码来源:rtmp_phy.c


示例7: rtmp_bbp_set_ctrlch

INT rtmp_bbp_set_ctrlch(struct _RTMP_ADAPTER *pAd, INT ext_ch)
{
    UCHAR val, old_val = 0;

    RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &old_val);
    val = old_val;
    switch (ext_ch)
    {
    case EXTCHA_BELOW:
        val |= (0x20);
        break;
    case EXTCHA_ABOVE:
    case EXTCHA_NONE:
        val &= (~0x20);
        break;
    }

    if (val != old_val)
        RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, val);

#ifdef CONFIG_STA_SUPPORT
#endif /* CONFIG_STA_SUPPORT */

    return TRUE;
}
开发者ID:kuscsik，项目名称:Archer_T2U，代码行数:25，代码来源:rtmp_phy.c


示例8: APAsicEvaluateRxAnt

/*
    ========================================================================
    Routine Description:
        Periodic evaluate antenna link status
        
    Arguments:
        pAd         - Adapter pointer
        
    Return Value:
        None
        
    ========================================================================
*/
VOID APAsicEvaluateRxAnt(
	IN PRTMP_ADAPTER	pAd)
{
	UCHAR	BBPR3 = 0;
	ULONG	TxTotalCnt;

#ifdef RALINK_ATE
	if (ATE_ON(pAd))
		return;
#endif /* RALINK_ATE */
#ifdef CARRIER_DETECTION_SUPPORT
	if(pAd->CommonCfg.CarrierDetect.CD_State == CD_SILENCE)
	return;
#endif /* CARRIER_DETECTION_SUPPORT */
	

	
	RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &BBPR3);
	BBPR3 &= (~0x18);
	if((pAd->Antenna.field.RxPath == 3) 
#ifdef DOT11_N_SUPPORT
#ifdef GREENAP_SUPPORT
		&& (pAd->ApCfg.bGreenAPActive == FALSE)
#endif /* GREENAP_SUPPORT */
#endif /* DOT11_N_SUPPORT */
		)
	{
		BBPR3 |= (0x10);
	}
	else if((pAd->Antenna.field.RxPath == 2) 
#ifdef DOT11_N_SUPPORT
#ifdef GREENAP_SUPPORT
		&& (pAd->ApCfg.bGreenAPActive == FALSE)
#endif /* GREENAP_SUPPORT */
#endif /* DOT11_N_SUPPORT */
		)
	{
		BBPR3 |= (0x8);
	}
	else if(pAd->Antenna.field.RxPath == 1)
	{
		BBPR3 |= (0x0);
	}
	RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BBPR3);

	TxTotalCnt = pAd->RalinkCounters.OneSecTxNoRetryOkCount + 
					pAd->RalinkCounters.OneSecTxRetryOkCount + 
					pAd->RalinkCounters.OneSecTxFailCount;

	if (TxTotalCnt > 50)
	{
		RTMPSetTimer(&pAd->Mlme.RxAntEvalTimer, 20);
		pAd->Mlme.bLowThroughput = FALSE;
	}
	else
	{
		RTMPSetTimer(&pAd->Mlme.RxAntEvalTimer, 300);
		pAd->Mlme.bLowThroughput = TRUE;
	}
}
开发者ID:houzhenggang，项目名称:MT，代码行数:73，代码来源:ap_mlme.c


示例9: rtmp_bbp_set_rxpath

static INT rtmp_bbp_set_rxpath(struct _RTMP_ADAPTER *pAd, INT rxpath)
{
	UCHAR val = 0;

	
	RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &val);
	val &= (~0x18);
	if(rxpath == 3)
		val |= (0x10);
	else if(rxpath == 2)
		val |= (0x8);
	else if(rxpath == 1)
		val |= (0x0);
	RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, val);

#ifdef CONFIG_STA_SUPPORT
#ifdef RTMP_MAC_PCI
	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
	{
		pAd->StaCfg.BBPR3 = val;
	}
#endif /* RTMP_MAC_PCI */
#endif /* CONFIG_STA_SUPPORT */
	return TRUE;
}
开发者ID:pierce1234，项目名称:rt-n56u，代码行数:25，代码来源:rtmp_phy.c


示例10: RT30xxLoadRFNormalModeSetup

/*
	add by johnli, RF power sequence setup

	==========================================================================
	Description:

	Load RF normal operation-mode setup
	
	==========================================================================
 */
VOID RT30xxLoadRFNormalModeSetup(
	IN PRTMP_ADAPTER 	pAd)
{
	UCHAR RFValue, bbpreg = 0;

	{
		/* improve power consumption */
		RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R138, &bbpreg);
		if (pAd->Antenna.field.TxPath == 1)
		{
			/* turn off tx DAC_1*/
			bbpreg = (bbpreg | 0x20);
		}

		if (pAd->Antenna.field.RxPath == 1)
		{
			/* turn off tx ADC_1*/
			bbpreg &= (~0x2);
		}
		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R138, bbpreg);
	}

	/*RX0_PD & TX0_PD, RF R1 register Bit 2 & Bit 3 to 0 and RF_BLOCK_en,RX1_PD & TX1_PD, Bit0, Bit 4 & Bit5 to 1*/
	RT30xxReadRFRegister(pAd, RF_R01, &RFValue);
	RFValue = (RFValue & (~0x0C)) | 0x31;
	RT30xxWriteRFRegister(pAd, RF_R01, RFValue);

	/* TX_LO2_en, RF R15 register Bit 3 to 0*/
	RT30xxReadRFRegister(pAd, RF_R15, &RFValue);
	RFValue &= (~0x08);
	RT30xxWriteRFRegister(pAd, RF_R15, RFValue);


	/* TX_LO1_en, RF R17 register Bit 3 to 0*/
	RT30xxReadRFRegister(pAd, RF_R17, &RFValue);
	RFValue &= (~0x08);
	/* to fix rx long range issue*/
	if (((pAd->MACVersion & 0xffff) >= 0x0211) && (pAd->NicConfig2.field.ExternalLNAForG == 0))
	{
		RFValue |= 0x20;
	}
	/* set RF_R17_bit[2:0] equal to EEPROM setting at 0x48h*/
	if (pAd->TxMixerGain24G >= 2)
	{
		RFValue &= (~0x7);  /* clean bit [2:0]*/
		RFValue |= pAd->TxMixerGain24G;
	}
	RT30xxWriteRFRegister(pAd, RF_R17, RFValue);

	/* RX_LO1_en, RF R20 register Bit 3 to 0*/
	RT30xxReadRFRegister(pAd, RF_R20, &RFValue);
	RFValue &= (~0x08);
	RT30xxWriteRFRegister(pAd, RF_R20, RFValue);

	/* RX_LO2_en, RF R21 register Bit 3 to 0*/
	RT30xxReadRFRegister(pAd, RF_R21, &RFValue);
	RFValue &= (~0x08);
	RT30xxWriteRFRegister(pAd, RF_R21, RFValue);
}
开发者ID:Audioniek，项目名称:Fortis-4G，代码行数:69，代码来源:rt30xx.c


示例11: rtmp_bbp_set_bw

static INT rtmp_bbp_set_bw(struct _RTMP_ADAPTER *pAd, UINT8 bw)
{
	UCHAR val, old_val = 0;
	BOOLEAN bstop = FALSE;
	UINT32 Data, MTxCycle, macStatus;


	if (bw != pAd->CommonCfg.BBPCurrentBW)
		bstop = TRUE;

	if (bstop)
	{
		/* Disable MAC Tx/Rx */
		RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Data);
		Data &= (~0x0C);
		RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Data);

		/* Check MAC Tx/Rx idle */
		for (MTxCycle = 0; MTxCycle < 10000; MTxCycle++)
		{
			RTMP_IO_READ32(pAd, MAC_STATUS_CFG, &macStatus);
			if (macStatus & 0x3)
				RtmpusecDelay(50);
			else
				break;
		}
	}

	RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &old_val);
	val = (old_val & (~0x18));
	switch (bw)
	{
		case BW_20:
			val &= (~0x18);
			break;
		case BW_40:
			val |= (0x10);
			break;
		case BW_10:
			val |= 0x08;
			break;	
	}

	if (val != old_val) {
		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, val);
	}

	if (bstop)
	{
		/* Enable MAC Tx/Rx */
		RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Data);
		Data |= 0x0C;
		RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Data);
	}

	pAd->CommonCfg.BBPCurrentBW = bw;
	
	return TRUE;
}
开发者ID:pierce1234，项目名称:rt-n56u，代码行数:59，代码来源:rtmp_phy.c


示例12: InitFrequencyCalibration

VOID InitFrequencyCalibration(
	IN PRTMP_ADAPTER pAd)
{
	BBP_R179_STRUC BbpR179 = {{0}};
	BBP_R180_STRUC BbpR180 = {{0}};
	BBP_R182_STRUC BbpR182 = {{0}};

	if (pAd->FreqCalibrationCtrl.bEnableFrequencyCalibration == TRUE)
	{	
		DBGPRINT(RT_DEBUG_TRACE, ("---> %s\n", __FUNCTION__));
		
		
		/* Initialize the RX_END_STATUS (1) for "Rx OFDM/CCK frequency offset report"*/
		
		if (IS_RT5390(pAd))
		{
			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R142, 1);
			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R143, BBP_R57); /* Rx OFDM/CCK frequency offset report*/
		}
		else if (IS_RT3390(pAd))
		{
			
			/* Initialize the RX_END_STATUS (1, 5) for "Rx OFDM/CCK frequency offset report"*/
			
			BbpR179.field.DataIndex1 = 1;
			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R179, BbpR179.byte);
			BbpR180.field.DataIndex2 = 5;
			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R180, BbpR180.byte);
			BbpR182.field.DataArray = BBP_R57; /* Rx OFDM/CCK frequency offset report*/
			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R182, BbpR182.byte);
		}
		else
		{
			DBGPRINT(RT_DEBUG_ERROR, ("%s: Not support IC type (MACVersion = 0x%X)\n", __FUNCTION__, pAd->MACVersion));
		}
		
		StopFrequencyCalibration(pAd);

		DBGPRINT(RT_DEBUG_TRACE, ("%s: frequency offset in the EEPROM = %ld\n", 
			__FUNCTION__, 
			pAd->RfFreqOffset));

		DBGPRINT(RT_DEBUG_TRACE, ("<--- %s\n", __FUNCTION__));
	}
}
开发者ID:EddyKuo，项目名称:linux-sdk-kernel-source，代码行数:45，代码来源:frq_cal.c


示例13: P2PDiscListenAction

static VOID P2PDiscListenAction(
	IN PRTMP_ADAPTER pAd,
	IN MLME_QUEUE_ELEM *Elem)
{
	P2P_DISC_STATE *pCurrState = &(pAd->P2pCfg.DiscCurrentState);
	PRT_P2P_CONFIG pP2PCtrl = &pAd->P2pCfg;

	if (pP2PCtrl->P2pCounter.bStartScan == TRUE)
		pP2PCtrl->P2pCounter.ListenInterval = (RandomByte(pAd) % 3) + pP2PCtrl->P2pCounter.ListenIntervalBias; /* 1~3 */
	else
		pP2PCtrl->P2pCounter.ListenInterval = 5;

	/* ExtListenInterval is in ms. So /100 */
	if (IS_P2P_SUPPORT_EXT_LISTEN(pAd))
		pP2PCtrl->P2pCounter.ListenInterval = pP2PCtrl->ExtListenPeriod/100;

	if (pAd->LatchRfRegs.Channel != pP2PCtrl->ListenChannel)
	{
		UINT32	Data = 0, macStatus;
		UINT32 MTxCycle, MRxCycle;
		UCHAR BBPValue = 0;

		/* Disable MAC Tx/Rx */
		RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Data);
		Data &= (~0x0C);
		RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Data);

		/* Check MAC Tx/Rx idle */
		for (MTxCycle = 0; MTxCycle < 10000; MTxCycle++)
		{
			RTMP_IO_READ32(pAd, MAC_STATUS_CFG, &macStatus);
			if (macStatus & 0x3)
				RTMPusecDelay(50);
			else
				break;
		}

		AsicSwitchChannel(pAd, pP2PCtrl->ListenChannel, FALSE);
		AsicLockChannel(pAd, pP2PCtrl->ListenChannel);

		/* Let BBP register at 20MHz */
		RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &BBPValue);
		BBPValue &= (~0x18);
		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, BBPValue);		

		/* Enable MAC Tx/Rx */
		RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Data);
		Data |= 0x0C;
		RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Data);
	}
	
	DBGPRINT(RT_DEBUG_TRACE, ("%s:: Listen interval - %d\n", __FUNCTION__, pP2PCtrl->P2pCounter.ListenInterval));

	pP2PCtrl->P2pCounter.bListen = TRUE;
	*pCurrState = P2P_DISC_LISTEN;
}
开发者ID:2812015651，项目名称:cuckoo，代码行数:56，代码来源:p2p_disc_mng.c


示例14: AsicBBPWriteWithRxChain

static NDIS_STATUS AsicBBPWriteWithRxChain(
	IN RTMP_ADAPTER *pAd,
	IN UCHAR bbpId,
	IN CHAR bbpVal,
	IN RX_CHAIN_IDX rx_ch_idx)
{
	UCHAR idx = 0, val = 0;

	if (((pAd->MACVersion & 0xffff0000) <= 0x30900000) || 
		(pAd->Antenna.field.RxPath == 1))
	{
		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, bbpId, bbpVal);
		return NDIS_STATUS_SUCCESS;
	}
	
	while (rx_ch_idx != 0)
	{
		if (idx >= pAd->Antenna.field.RxPath)
			break;
		
		if (rx_ch_idx & 0x01)
		{
			RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R27, &val);
			val = (val & (~0x60)) | (idx << 5);

#ifdef RTMP_MAC_PCI
			if (IS_PCI_INF(pAd) || IS_RBUS_INF(pAd))
			{
				RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R27, val);
				RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, bbpId, bbpVal);
			}
#endif /* RTMP_MAC_PCI */

			DBGPRINT(RT_DEBUG_INFO, 
					("%s(Idx):Write(R%d,val:0x%x) to Chain(0x%x, idx:%d)\n",
						__FUNCTION__, bbpId, bbpVal, rx_ch_idx, idx));
		}
		rx_ch_idx >>= 1;
		idx++;
	}

	return NDIS_STATUS_SUCCESS;
}
开发者ID:pierce1234，项目名称:rt-n56u，代码行数:43，代码来源:rtmp_phy.c


示例15: ChipBBPAdjust

static VOID ChipBBPAdjust(RTMP_ADAPTER *pAd)
{
	UCHAR bbp_val;
	UINT8 rf_bw, ext_ch;

#ifdef DOT11_N_SUPPORT
	if (get_ht_cent_ch(pAd, &rf_bw, &ext_ch) == FALSE)
#endif /* DOT11_N_SUPPORT */
	{
		rf_bw = BW_20;
		ext_ch = EXTCHA_NONE;
		pAd->CommonCfg.CentralChannel = pAd->CommonCfg.Channel;
	}

	bbp_set_bw(pAd, rf_bw);

	/*  TX/RX : control channel setting */
	AsicSetCtrlCh(pAd, ext_ch);
	bbp_set_ctrlch(pAd, ext_ch);

	/* request by Gary 20070208 for middle and long range G Band*/
#ifdef DOT11_N_SUPPORT
	if (rf_bw == BW_40)
		bbp_val = (pAd->CommonCfg.Channel > 14) ? 0x48 : 0x38;
	else
#endif /* DOT11_N_SUPPORT */
		bbp_val = (pAd->CommonCfg.Channel > 14) ? 0x40 : 0x38;
	bbp_set_agc(pAd, bbp_val, RX_CHAIN_ALL);


	if (pAd->MACVersion == 0x28600100)
	{
#ifdef RT28xx
		RT28xx_ch_tunning(pAd, BW_40);
#endif /* RT28xx */
	}
	else
	{
		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R69, 0x12);
		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R70, 0x0A);
		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R73, 0x10);
	}

	MTWF_LOG(DBG_CAT_ALL, DBG_SUBCAT_ALL, DBG_LVL_TRACE, ("%s(): BW_%s, ChannelWidth=%d, Channel=%d, ExtChanOffset=%d(%d) \n",
					__FUNCTION__, (rf_bw == BW_40 ? "40" : "20"),
					pAd->CommonCfg.HtCapability.HtCapInfo.ChannelWidth, 
					pAd->CommonCfg.Channel, 
					pAd->CommonCfg.RegTransmitSetting.field.EXTCHA,
					pAd->CommonCfg.AddHTInfo.AddHtInfo.ExtChanOffset));

	/* request by Gary 20070208 for middle and long range A Band*/
	if (pAd->CommonCfg.Channel > 14)
		bbp_val = 0x1D;
	else
		bbp_val = 0x2D;
	RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R62, bbp_val);
	RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R63, bbp_val);
	RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R64, bbp_val);
	/*RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R86, bbp_val);*/
}
开发者ID:AnyoeDove，项目名称:mtk-sources，代码行数:60，代码来源:rtxx_dft.c


示例16: BbpRadarDetectionStart

/*
	========================================================================

	Routine Description:
		Bbp Radar detection routine

	Arguments:
		pAd 	Pointer to our adapter

	Return Value:

	========================================================================
*/
VOID BbpRadarDetectionStart(
	IN PRTMP_ADAPTER pAd)
{
	UINT8 RadarPeriod;

	if (pAd->CommonCfg.dfs_func >= HARDWARE_DFS_V1) 
	{
		return;
	}

	RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, 114, 0x02);
	RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, 121, 0x20);
	RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, 122, 0x00);
	RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, 123, 0x08/*0x80*/);
	RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, 124, 0x28);
	RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, 125, 0xff);


	RadarPeriod = ((UINT)RdIdleTimeTable[pAd->CommonCfg.RadarDetect.RDDurRegion][0] + (UINT)pAd->CommonCfg.RadarDetect.DfsSessionTime) < 250 ?
			(RdIdleTimeTable[pAd->CommonCfg.RadarDetect.RDDurRegion][0] + pAd->CommonCfg.RadarDetect.DfsSessionTime) : 250;

	RTMP_IO_WRITE8(pAd, 0x7020, 0x1d);
	RTMP_IO_WRITE8(pAd, 0x7021, 0x40);

	RadarDetectionStart(pAd, 0, RadarPeriod);

	return;
}
开发者ID:Audioniek，项目名称:Fortis-4G，代码行数:41，代码来源:dfs.c


示例17: RT3572WriteBBPR66

/*
	========================================================================
	
	Routine Description: 3572/3592 R66 writing must select BBP_R27

	Arguments:

	Return Value:

	IRQL = 
	
	Note:
	
	========================================================================
*/
NTSTATUS	RT3572WriteBBPR66(
	IN	PRTMP_ADAPTER	pAd,
	IN	UCHAR			Value)
{
	NTSTATUS NStatus = STATUS_UNSUCCESSFUL;
	UCHAR	bbpData = 0;

	if (!IS_RT3572(pAd) && !IS_RT3593(pAd))
	{
		DBGPRINT(RT_DEBUG_ERROR, ("%s: Incorrect MAC version, pAd->MACVersion = 0x%X\n", 
			__FUNCTION__, 
			pAd->MACVersion));
		return NStatus;
	}
	RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R27, &bbpData);

	/* R66 controls the gain of Rx0*/
	bbpData &= ~(0x60);	/*clear bit 5,6*/
#ifdef RTMP_MAC_USB
	if (RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R27, bbpData) == STATUS_SUCCESS)
#endif /* RTMP_MAC_USB */
	{
		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, Value);
	}

	/* R66 controls the gain of Rx1*/
	bbpData |= 0x20;		/* set bit 5*/
#ifdef RTMP_MAC_USB
	if (RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R27, bbpData) == STATUS_SUCCESS)
#endif /* RTMP_MAC_USB */
	{
		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, Value);
		NStatus = STATUS_SUCCESS;
	}


	return NStatus;
}
开发者ID:celeduc，项目名称:rt3572sta，代码行数:53，代码来源:rt35xx.c


示例18: BbpRadarDetectionStart

/*
	========================================================================

	Routine Description:
		Bbp Radar detection routine

	Arguments:
		pAd 	Pointer to our adapter

	Return Value:

	========================================================================
*/
VOID BbpRadarDetectionStart(
	IN PRTMP_ADAPTER pAd)
{
	UINT8 RadarPeriod;

	RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, 114, 0x02);
	RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, 121, 0x20);
	RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, 122, 0x00);
	RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, 123, 0x08/*0x80*/);
	RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, 124, 0x28);
	RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, 125, 0xff);

#ifdef MERGE_ARCH_TEAM
	if ((pAd->CommonCfg.RadarDetect.RDDurRegion == JAP) || (pAd->CommonCfg.RadarDetect.RDDurRegion == JAP_W53) || (pAd->CommonCfg.RadarDetect.RDDurRegion == JAP_W56))
	{
		pAd->CommonCfg.RadarDetect.RDDurRegion = JAP;
		pAd->CommonCfg.RadarDetect.RDDurRegion = JapRadarType(pAd);
		if (pAd->CommonCfg.RadarDetect.RDDurRegion == JAP_W56)
		{
			pAd->CommonCfg.RadarDetect.DfsSessionTime = 13;
		}
		else if (pAd->CommonCfg.RadarDetect.RDDurRegion == JAP_W53)
		{
			pAd->CommonCfg.RadarDetect.DfsSessionTime = 15;
		}
#ifdef CARRIER_DETECTION_SUPPORT
		pAd->CommonCfg.CarrierDetect.Enable = 1;
#endif // CARRIER_DETECTION_SUPPORT //
	}
#endif // MERGE_ARCH_TEAM //

#if 0
	// toggle Rx enable bit for radar detection.
	// it's Andy's recommand.
	{
		UINT32 Value;
	RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
	Value |= (0x1 << 3);
	RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
	Value &= ~(0x1 << 3);
	RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
	}
#endif 
	RadarPeriod = ((UINT)RdIdleTimeTable[pAd->CommonCfg.RadarDetect.RDDurRegion][0] + (UINT)pAd->CommonCfg.RadarDetect.DfsSessionTime) < 250 ?
			(RdIdleTimeTable[pAd->CommonCfg.RadarDetect.RDDurRegion][0] + pAd->CommonCfg.RadarDetect.DfsSessionTime) : 250;

#ifdef MERGE_ARCH_TEAM


#else // Original RT28xx source code.
	RTMP_IO_WRITE8(pAd, 0x7020, 0x1d);
	RTMP_IO_WRITE8(pAd, 0x7021, 0x40);
#endif // MERGE_ARCH_TEAM //

	RadarDetectionStart(pAd, 0, RadarPeriod);
	return;
}
开发者ID:esironal，项目名称:mywdtvlive，代码行数:70，代码来源:dfs.c


示例19: rtmp_bbp_set_mmps

INT rtmp_bbp_set_mmps(struct _RTMP_ADAPTER *pAd, BOOLEAN ReduceCorePower)
{
    UCHAR bbp_val, org_val;

    RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &org_val);
    bbp_val = org_val;
    if (ReduceCorePower)
        bbp_val |= 0x04;
    else
        bbp_val &= ~0x04;

    if (bbp_val != org_val)
        RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, bbp_val);

    return TRUE;
}
开发者ID:kuscsik，项目名称:Archer_T2U，代码行数:16，代码来源:rtmp_phy.c


示例20: BbpRadarDetectionStart

/*
	========================================================================

	Routine Description:
		Bbp Radar detection routine

	Arguments:
		pAd 	Pointer to our adapter

	Return Value:

	========================================================================
*/
VOID BbpRadarDetectionStart(
	IN PRTMP_ADAPTER pAd)
{
	UINT8 RadarPeriod;

	RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, 114, 0x02);
	RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, 121, 0x20);
	RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, 122, 0x00);
	RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, 123, 0x08/*0x80*/);
	RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, 124, 0x28);
	RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, 125, 0xff);

#ifdef MERGE_ARCH_TEAM
	if ((pAd->CommonCfg.RadarDetect.RDDurRegion == JAP) || (pAd->CommonCfg.RadarDetect.RDDurRegion == JAP_W53) || (pAd->CommonCfg.RadarDetect.RDDurRegion == JAP_W56))
	{
		pAd->CommonCfg.RadarDetect.RDDurRegion = JAP;
		pAd->CommonCfg.RadarDetect.RDDurRegion = JapRadarType(pAd);
		if (pAd->CommonCfg.RadarDetect.RDDurRegion == JAP_W56)
		{
			pAd->CommonCfg.RadarDetect.DfsSessionTime = 13;
		}
		else if (pAd->CommonCfg.RadarDetect.RDDurRegion == JAP_W53)
		{
			pAd->CommonCfg.RadarDetect.DfsSessionTime = 15;
		}
#ifdef CARRIER_DETECTION_SUPPORT
		pAd->CommonCfg.CarrierDetect.Enable = 1;
#endif // CARRIER_DETECTION_SUPPORT //
	}
#endif // MERGE_ARCH_TEAM //

	RadarPeriod = ((UINT)RdIdleTimeTable[pAd->CommonCfg.RadarDetect.RDDurRegion][0] + (UINT)pAd->CommonCfg.RadarDetect.DfsSessionTime) < 250 ?
			(RdIdleTimeTable[pAd->CommonCfg.RadarDetect.RDDurRegion][0] + pAd->CommonCfg.RadarDetect.DfsSessionTime) : 250;

#ifdef MERGE_ARCH_TEAM

#ifdef CONFIG_AP_SUPPORT
#ifdef CARRIER_DETECTION_SUPPORT
		if (pAd->CommonCfg.CarrierDetect.Enable == TRUE)
		{
			// make sure CarrierDetect wont send CTS
			CARRIER_DETECT_STOP(pAd);
		}
#endif // CARRIER_DETECTION_SUPPORT //
#endif // CONFIG_AP_SUPPORT //

#else // Original RT28xx source code.
	RTMP_IO_WRITE8(pAd, 0x7020, 0x1d);
	RTMP_IO_WRITE8(pAd, 0x7021, 0x40);
#endif // MERGE_ARCH_TEAM //

	RadarDetectionStart(pAd, 0, RadarPeriod);
	return;
}
开发者ID:eagleworld，项目名称:RT3070_SoftAP，代码行数:67，代码来源:dfs.c



注：本文中的RTMP_BBP_IO_WRITE8_BY_REG_ID函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花
握手
雷人
路过
鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
More+
上一篇：
C++ RTMP_Connect函数代码示例发布时间：2022-05-30
下一篇：
C++ RTMP_BBP_IO_READ8_BY_REG_ID函数代码示例发布时间：2022-05-30
热门推荐
More+
热门话题
More+
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服（服务时间 9:00～18:00）

在线QQ客服
地址：深圳市南山区西丽大学城创智工业园
电邮：jeky_zhao#qq.com
移动电话：139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap