• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号
登陆 注册

C++ RTMP_BBP_IO_READ8_BY_REG_ID函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中RTMP_BBP_IO_READ8_BY_REG_ID函数的典型用法代码示例。如果您正苦于以下问题：C++ RTMP_BBP_IO_READ8_BY_REG_ID函数的具体用法？C++ RTMP_BBP_IO_READ8_BY_REG_ID怎么用？C++ RTMP_BBP_IO_READ8_BY_REG_ID使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了RTMP_BBP_IO_READ8_BY_REG_ID函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: rtmp_bbp_get_temp

static INT rtmp_bbp_get_temp(struct _RTMP_ADAPTER *pAd, CHAR *temp_val)
{
#if defined(RTMP_INTERNAL_TX_ALC) || defined(RTMP_TEMPERATURE_COMPENSATION) 
	BBP_R49_STRUC bbp_val;

	bbp_val.byte = 0;
	RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R49, &bbp_val.byte);
	*temp_val = (CHAR)bbp_val.byte;

	pAd->curr_temp = (bbp_val.byte & 0xff);
#endif

	return TRUE;
}
开发者ID:pierce1234，项目名称:rt-n56u，代码行数:14，代码来源:rtmp_phy.c


示例2: rtmp_bbp_is_ready

INT rtmp_bbp_is_ready(struct _RTMP_ADAPTER *pAd)
{
    INT idx = 0;
    UCHAR val;

    do
    {
        RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R0, &val);
        if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST))
            return FALSE;
        DBGPRINT(RT_DEBUG_TRACE, ("BBP version = %x\n", val));
    } while ((++idx < 20) && ((val == 0xff) || (val == 0x00)));

    return (((val == 0xff) || (val == 0x00)) ? FALSE : TRUE);
}
开发者ID:kuscsik，项目名称:Archer_T2U，代码行数:15，代码来源:rtmp_phy.c


示例3: rtmp_bbp_set_mmps

INT rtmp_bbp_set_mmps(struct _RTMP_ADAPTER *pAd, BOOLEAN ReduceCorePower)
{
    UCHAR bbp_val, org_val;

    RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &org_val);
    bbp_val = org_val;
    if (ReduceCorePower)
        bbp_val |= 0x04;
    else
        bbp_val &= ~0x04;

    if (bbp_val != org_val)
        RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, bbp_val);

    return TRUE;
}
开发者ID:kuscsik，项目名称:Archer_T2U，代码行数:16，代码来源:rtmp_phy.c


示例4: rtmp_bbp_set_rxpath

static INT rtmp_bbp_set_rxpath(struct _RTMP_ADAPTER *pAd, INT rxpath)
{
	UCHAR val = 0;

	
	RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &val);
	val &= (~0x18);
	if(rxpath == 3)
		val |= (0x10);
	else if(rxpath == 2)
		val |= (0x8);
	else if(rxpath == 1)
		val |= (0x0);
	RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, val);

	return TRUE;
}
开发者ID:Brainiarc7，项目名称:mtk-wifi-gpl，代码行数:17，代码来源:rtmp_phy.c


示例5: RT3593LoadRFNormalModeSetup

/*
	==========================================================================
	Description:

	Load RF normal operation-mode setup
	
	==========================================================================
 */
static VOID RT3593LoadRFNormalModeSetup(
	IN PRTMP_ADAPTER 	pAd)
{
	UCHAR RfReg;
	CHAR bbpreg = 0;


	// TX_LO2_en
	RT30xxReadRFRegister(pAd, RF_R50, (PUCHAR)&RfReg);
	RfReg = ((RfReg & ~0x10) | 0x00); // tx_lo2_en (both bands, 0: LO2 follows TR switch)
	RT30xxWriteRFRegister(pAd, RF_R50, (UCHAR)RfReg);

	// TX_LO1_en, RX_MX2_GC
	RT30xxReadRFRegister(pAd, RF_R51, (PUCHAR)&RfReg);
	RfReg = ((RfReg & ~0x1C) | ((pAd->TxMixerGain24G & 0x07) << 2)); // tx_mx1_cc (RF mixer output tank tuning, both bands)
	RT30xxWriteRFRegister(pAd, RF_R51, (UCHAR)RfReg);

	// RX_LO1_en
	RT30xxReadRFRegister(pAd, RF_R38, (PUCHAR)&RfReg);
	RfReg = ((RfReg & ~0x20) | 0x00); // rx_lo1_en (enable RX LO1, 0: LO1 follows TR switch)
	RT30xxWriteRFRegister(pAd, RF_R38, (UCHAR)RfReg);

	// RX_LO2_en
	RT30xxReadRFRegister(pAd, RF_R39, (PUCHAR)&RfReg);
	RfReg = ((RfReg & ~0x80) | 0x00); // rx_lo2_en (enable RX LO2, 0: LO2 follows TR switch)
	RT30xxWriteRFRegister(pAd, RF_R39, (UCHAR)RfReg);

	//
	// Avoid data lost and CRC error
	//
	RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &bbpreg);
	bbpreg = ((bbpreg & ~0x40) | 0x40); // MAC interface control (MAC_IF_80M, 1: 80 MHz)
	RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, bbpreg);

	RT30xxReadRFRegister(pAd, RF_R32, (PUCHAR)&RfReg);
	RfReg = ((RfReg & ~0x07) | 0x07); // BB_rx_out_en (enable DAC output or baseband input)
	//RT30xxWriteRFRegister(pAd, RF_R32, (UCHAR)RfReg);

	RT30xxReadRFRegister(pAd, RF_R01, (PUCHAR)&RfReg);
	RfReg = ((RfReg & ~0x03) | 0x03); // rf_block_en and pll_en
	RT30xxWriteRFRegister(pAd, RF_R01, (UCHAR)RfReg);

	RT30xxReadRFRegister(pAd, RF_R30, (PUCHAR)&RfReg);
	RfReg = ((RfReg & ~0x18) | 0x10); // rxvcm (Rx BB filter VCM)
	RT30xxWriteRFRegister(pAd, RF_R30, (UCHAR)RfReg);
} /* End of RT3593LoadRFNormalModeSetup */
开发者ID:eagleworld，项目名称:RT3070_SoftAP，代码行数:54，代码来源:rt3593.c


示例6: rtmp_bbp_set_rxpath

INT rtmp_bbp_set_rxpath(struct _RTMP_ADAPTER *pAd, INT rxpath)
{
    UCHAR val = 0;


    RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &val);
    val &= (~0x18);
    if(rxpath == 3)
        val |= (0x10);
    else if(rxpath == 2)
        val |= (0x8);
    else if(rxpath == 1)
        val |= (0x0);
    RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, val);

#ifdef CONFIG_STA_SUPPORT
#endif /* CONFIG_STA_SUPPORT */
    return TRUE;
}
开发者ID:kuscsik，项目名称:Archer_T2U，代码行数:19，代码来源:rtmp_phy.c


示例7: AsicBBPWriteWithRxChain

static NDIS_STATUS AsicBBPWriteWithRxChain(
	IN RTMP_ADAPTER *pAd,
	IN UCHAR bbpId,
	IN CHAR bbpVal,
	IN RX_CHAIN_IDX rx_ch_idx)
{
	UCHAR idx = 0, val = 0;

	if (((pAd->MACVersion & 0xffff0000) <= 0x30900000) || 
		(pAd->Antenna.field.RxPath == 1))
	{
		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, bbpId, bbpVal);
		return NDIS_STATUS_SUCCESS;
	}
	
	while (rx_ch_idx != 0)
	{
		if (idx >= pAd->Antenna.field.RxPath)
			break;
		
		if (rx_ch_idx & 0x01)
		{
			RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R27, &val);
			val = (val & (~0x60)) | (idx << 5);

#ifdef RTMP_MAC_PCI
			if (IS_PCI_INF(pAd) || IS_RBUS_INF(pAd))
			{
				RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R27, val);
				RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, bbpId, bbpVal);
			}
#endif /* RTMP_MAC_PCI */

			DBGPRINT(RT_DEBUG_INFO, 
					("%s(Idx):Write(R%d,val:0x%x) to Chain(0x%x, idx:%d)\n",
						__FUNCTION__, bbpId, bbpVal, rx_ch_idx, idx));
		}
		rx_ch_idx >>= 1;
		idx++;
	}

	return NDIS_STATUS_SUCCESS;
}
开发者ID:pierce1234，项目名称:rt-n56u，代码行数:43，代码来源:rtmp_phy.c


示例8: rtmp_bbp_tx_comp_init

INT rtmp_bbp_tx_comp_init(RTMP_ADAPTER *pAd, INT adc_insel, INT tssi_mode)
{
    UCHAR bbp_val, rf_val;


    /* Set BBP_R47 */
    RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R47, &bbp_val);
    bbp_val &= 0xe7;
    bbp_val |= ((tssi_mode << 3) & 0x18);
    bbp_val |= 0x80;
    RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R47, bbp_val);

    /*  Set RF_R27 */
    RT30xxReadRFRegister(pAd, RF_R27, &rf_val);
    rf_val &= 0x3f;
    rf_val |= ((adc_insel << 6) & 0xc0);
    RT30xxWriteRFRegister(pAd, RF_R27, rf_val);
    DBGPRINT(RT_DEBUG_TRACE, ("[temp. compensation] Set RF_R27 to 0x%x\n", rf_val));
}
开发者ID:kuscsik，项目名称:Archer_T2U，代码行数:19，代码来源:rtmp_phy.c


示例9: rtmp_bbp_set_filter_coefficient_ctrl

static INT rtmp_bbp_set_filter_coefficient_ctrl(RTMP_ADAPTER *pAd, UCHAR Channel)
{
	UCHAR bbp_val = 0, org_val = 0;

	if (Channel == 14)
	{
		/* when Channel==14 && Mode==CCK && BandWidth==20M, BBP R4 bit5=1 */
		RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &org_val);
		bbp_val = org_val;
		if (WMODE_EQUAL(pAd->CommonCfg.PhyMode, WMODE_B))
			bbp_val |= 0x20;
		else
			bbp_val &= (~0x20);

		if (bbp_val != org_val)
			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, bbp_val);
	}

	return TRUE;
}
开发者ID:pierce1234，项目名称:rt-n56u，代码行数:20，代码来源:rtmp_phy.c


示例10: RT3572WriteBBPR66

/*
	========================================================================
	
	Routine Description: 3572/3592 R66 writing must select BBP_R27

	Arguments:

	Return Value:

	IRQL = 
	
	Note:
	
	========================================================================
*/
NTSTATUS	RT3572WriteBBPR66(
	IN	PRTMP_ADAPTER	pAd,
	IN	UCHAR			Value)
{
	NTSTATUS NStatus = STATUS_UNSUCCESSFUL;
	UCHAR	bbpData = 0;

	if (!IS_RT3572(pAd) && !IS_RT3593(pAd))
	{
		DBGPRINT(RT_DEBUG_ERROR, ("%s: Incorrect MAC version, pAd->MACVersion = 0x%X\n", 
			__FUNCTION__, 
			pAd->MACVersion));
		return NStatus;
	}
	RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R27, &bbpData);

	/* R66 controls the gain of Rx0*/
	bbpData &= ~(0x60);	/*clear bit 5,6*/
#ifdef RTMP_MAC_USB
	if (RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R27, bbpData) == STATUS_SUCCESS)
#endif /* RTMP_MAC_USB */
	{
		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, Value);
	}

	/* R66 controls the gain of Rx1*/
	bbpData |= 0x20;		/* set bit 5*/
#ifdef RTMP_MAC_USB
	if (RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R27, bbpData) == STATUS_SUCCESS)
#endif /* RTMP_MAC_USB */
	{
		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, Value);
		NStatus = STATUS_SUCCESS;
	}


	return NStatus;
}
开发者ID:celeduc，项目名称:rt3572sta，代码行数:53，代码来源:rt35xx.c


示例11: rtmp_bbp_set_ctrlch

static INT rtmp_bbp_set_ctrlch(struct _RTMP_ADAPTER *pAd, UINT8 ext_ch)
{
	UCHAR val, old_val = 0;

	RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &old_val);
	val = old_val;
	switch (ext_ch)
	{
		case EXTCHA_BELOW:
			val |= (0x20);
			break;
		case EXTCHA_ABOVE:
		case EXTCHA_NONE:
			val &= (~0x20);
			break;
	}

	if (val != old_val)
		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, val);


	return TRUE;
}
开发者ID:Brainiarc7，项目名称:mtk-wifi-gpl，代码行数:23，代码来源:rtmp_phy.c


示例12: RT30xx_ChipBBPAdjust

VOID RT30xx_ChipBBPAdjust(
    IN RTMP_ADAPTER            *pAd)
{
    UINT32 Value;
    UCHAR byteValue = 0;

    {
//        pAd->CommonCfg.BBPCurrentBW = BW_20;
//        pAd->CommonCfg.CentralChannel = pAd->CommonCfg.Channel;
        
        /*  TX : control channel at lower */
        RTMP_IO_READ32(pAd, TX_BAND_CFG, &Value);
        Value &= (~0x1);
        RTMP_IO_WRITE32(pAd, TX_BAND_CFG, Value);

        RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &byteValue);
        byteValue &= (~0x18);
        RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, byteValue);
        
        /* 20 MHz bandwidth*/

        /* request by Gary 20070208*/
        /*RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, 0x30);*/
        /* request by Brian 20070306*/
        RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, 0x38);
        RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R69, 0x12);
        RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R70, 0x0a);
        RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R73, 0x10);
    }
    
     /* request by Gary 20070208 for middle and long range G band*/
    RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R62, 0x2D);
    RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R63, 0x2D);
    RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R64, 0x2D);
    /*RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R86, 0x2D);*/
}
开发者ID:gexueyuan，项目名称:Cygnoides，代码行数:36，代码来源:rt30xx.c


示例13: P2PDiscCanlAction

static VOID P2PDiscCanlAction(
	IN PRTMP_ADAPTER pAd,
	IN MLME_QUEUE_ELEM *Elem)
{	
	P2P_DISC_STATE *pCurrState = &(pAd->P2pCfg.DiscCurrentState);
	PRT_P2P_CONFIG pP2PCtrl = &pAd->P2pCfg;
	UCHAR channel = pP2PCtrl->ListenChannel;
	UCHAR p2pindex;
	BOOLEAN bGoBack = TRUE;

	/*
		Go back to working channel
	*/
	if (INFRA_ON(pAd) || (pAd->flg_p2p_OpStatusFlags != P2P_DISABLE))
	{
		if ((pAd->CommonCfg.Channel != pAd->CommonCfg.CentralChannel) && (pAd->CommonCfg.BBPCurrentBW == BW_40))
			channel = pAd->CommonCfg.CentralChannel;
		else
			channel = pAd->CommonCfg.Channel;
	}

	p2pindex = P2pGroupTabSearch(pAd, pAd->P2pCfg.ConnectingMAC);
	if (p2pindex != P2P_NOT_FOUND)
	{
		if (pAd->P2pTable.Client[p2pindex].P2pClientState > P2PSTATE_DISCOVERY_UNKNOWN)
			bGoBack = FALSE;
	}

	if (bGoBack && (channel != pAd->LatchRfRegs.Channel))
	{
		UINT32	Data = 0, macStatus;
		UINT32 MTxCycle, MRxCycle;

		/* Disable MAC Tx/Rx */
		RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Data);
		Data &= (~0x0C);
		RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Data);

		/* Check MAC Tx/Rx idle */
		for (MTxCycle = 0; MTxCycle < 10000; MTxCycle++)
		{
			RTMP_IO_READ32(pAd, MAC_STATUS_CFG, &macStatus);
			if (macStatus & 0x3)
				RTMPusecDelay(50);
			else
				break;
		}
		
		AsicSwitchChannel(pAd, channel, FALSE);
		AsicLockChannel(pAd, channel);		
		if (pAd->CommonCfg.BBPCurrentBW == BW_40)
		{
			UCHAR BBPValue = 0;
			
			RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &BBPValue);
			BBPValue &= (~0x18);
			BBPValue |= 0x10;
			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, BBPValue);
		}

		//Enable MAC Tx/Rx
		RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Data);
		Data |= 0x0C;
		RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Data);
		DBGPRINT(RT_DEBUG_TRACE, ("P2PDiscCanlAction - Restore to channel %d\n",channel));
	}
		
	*pCurrState = P2P_DISC_IDLE;
}
开发者ID:2812015651，项目名称:cuckoo，代码行数:69，代码来源:p2p_disc_mng.c


示例14: APAsicRxAntEvalTimeout

/*
    ========================================================================
    Routine Description:
        After evaluation, check antenna link status
        
    Arguments:
        pAd         - Adapter pointer
        
    Return Value:
        None
        
    ========================================================================
*/
VOID APAsicRxAntEvalTimeout(
	PRTMP_ADAPTER	pAd) 
{
	UCHAR			BBPR3 = 0;
	CHAR			larger = -127, rssi0, rssi1, rssi2;

#ifdef RALINK_ATE
	if (ATE_ON(pAd))
		return;
#endif /* RALINK_ATE */

	/* if the traffic is low, use average rssi as the criteria */
	if (pAd->Mlme.bLowThroughput == TRUE)
	{
		rssi0 = pAd->ApCfg.RssiSample.LastRssi0;
		rssi1 = pAd->ApCfg.RssiSample.LastRssi1;
		rssi2 = pAd->ApCfg.RssiSample.LastRssi2;
	}
	else
	{
		rssi0 = pAd->ApCfg.RssiSample.AvgRssi0;
		rssi1 = pAd->ApCfg.RssiSample.AvgRssi1;
		rssi2 = pAd->ApCfg.RssiSample.AvgRssi2;
	}

	if(pAd->Antenna.field.RxPath == 3)
	{
		larger = max(rssi0, rssi1);
#ifdef DOT11N_SS3_SUPPORT
		if (pAd->CommonCfg.RxStream >= 3)
			pAd->Mlme.RealRxPath = 3;
		else
#endif /* DOT11N_SS3_SUPPORT */
		{
		if (larger > (rssi2 + 20))
			pAd->Mlme.RealRxPath = 2;
		else
			pAd->Mlme.RealRxPath = 3;
		}
	}
	/* Disable the below to fix 1T/2R issue. It's suggested by Rory at 2007/7/11. */

	RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &BBPR3);
	BBPR3 &= (~0x18);
	if(pAd->Mlme.RealRxPath == 3 
#ifdef DOT11_N_SUPPORT
#ifdef GREENAP_SUPPORT
		&& pAd->ApCfg.bGreenAPActive == FALSE
#endif /* GREENAP_SUPPORT */
#endif /* DOT11_N_SUPPORT */
		)
	{
		BBPR3 |= (0x10);
	}
	else if(pAd->Mlme.RealRxPath == 2
#ifdef DOT11_N_SUPPORT
#ifdef GREENAP_SUPPORT
		&& pAd->ApCfg.bGreenAPActive == FALSE
#endif /* GREENAP_SUPPORT */
#endif /* DOT11_N_SUPPORT */
		)
	{
		BBPR3 |= (0x8);
	}
	else if(pAd->Mlme.RealRxPath == 1)
	{
		BBPR3 |= (0x0);
	}
	RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BBPR3);
	
}
开发者ID:eckyecky，项目名称:rt-n56u，代码行数:84，代码来源:ap_mlme.c


示例15: APAsicEvaluateRxAnt

/*
    ========================================================================
    Routine Description:
        Periodic evaluate antenna link status
        
    Arguments:
        pAd         - Adapter pointer
        
    Return Value:
        None
        
    ========================================================================
*/
VOID APAsicEvaluateRxAnt(
	IN PRTMP_ADAPTER	pAd)
{
	UCHAR	BBPR3 = 0;
	ULONG	TxTotalCnt;

#ifdef RALINK_ATE
	if (ATE_ON(pAd))
		return;
#endif /* RALINK_ATE */
#ifdef CARRIER_DETECTION_SUPPORT
	if(pAd->CommonCfg.CarrierDetect.CD_State == CD_SILENCE)
	return;
#endif /* CARRIER_DETECTION_SUPPORT */
	
#ifdef TXBF_SUPPORT
	/* TODO: we didn't do RxAnt evaluate for 3x3 chips */
	if (IS_RT3883(pAd) || IS_RT2883(pAd))
		return;
#endif /* TXBF_SUPPORT */

	
	RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &BBPR3);
	BBPR3 &= (~0x18);
	if(pAd->Antenna.field.RxPath == 3 
#ifdef DOT11_N_SUPPORT
#ifdef GREENAP_SUPPORT
		&& pAd->ApCfg.bGreenAPActive == FALSE
#endif /* GREENAP_SUPPORT */
#endif /* DOT11_N_SUPPORT */
		)
	{
		BBPR3 |= (0x10);
	}
	else if(pAd->Antenna.field.RxPath == 2 
#ifdef DOT11_N_SUPPORT
#ifdef GREENAP_SUPPORT
		&& pAd->ApCfg.bGreenAPActive == FALSE
#endif /* GREENAP_SUPPORT */
#endif /* DOT11_N_SUPPORT */
		)
	{
		BBPR3 |= (0x8);
	}
	else if(pAd->Antenna.field.RxPath == 1)
	{
		BBPR3 |= (0x0);
	}
	RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BBPR3);

	TxTotalCnt = pAd->RalinkCounters.OneSecTxNoRetryOkCount + 
					pAd->RalinkCounters.OneSecTxRetryOkCount + 
					pAd->RalinkCounters.OneSecTxFailCount;

	if (TxTotalCnt > 50)
	{
		RTMPSetTimer(&pAd->Mlme.RxAntEvalTimer, 20);
		pAd->Mlme.bLowThroughput = FALSE;
	}
	else
	{
		RTMPSetTimer(&pAd->Mlme.RxAntEvalTimer, 300);
		pAd->Mlme.bLowThroughput = TRUE;
	}
}
开发者ID:eckyecky，项目名称:rt-n56u，代码行数:78，代码来源:ap_mlme.c


示例16: SendPSMPAction

/*
Description : Send PSMP Action frame If PSMP mode switches.
*/
VOID SendPSMPAction(
				   IN PRTMP_ADAPTER		pAd,
				   IN UCHAR				Wcid,
				   IN UCHAR				Psmp)
{
	PUCHAR          pOutBuffer = NULL;
	NDIS_STATUS     NStatus;
	//ULONG           Idx;
	FRAME_PSMP_ACTION   Frame;
	ULONG           FrameLen;
#ifdef RT30xx
	UCHAR			bbpdata=0;
	UINT32			macdata;
#endif // RT30xx //

	NStatus = MlmeAllocateMemory(pAd, &pOutBuffer);	 //Get an unused nonpaged memory
	if (NStatus != NDIS_STATUS_SUCCESS)
	{
		DBGPRINT(RT_DEBUG_ERROR,("BA - MlmeADDBAAction() allocate memory failed \n"));
		return;
	}
#ifdef CONFIG_STA_SUPPORT
	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
		ActHeaderInit(pAd, &Frame.Hdr, pAd->CommonCfg.Bssid, pAd->CurrentAddress, pAd->MacTab.Content[Wcid].Addr);
#endif // CONFIG_STA_SUPPORT //

	Frame.Category = CATEGORY_HT;
	Frame.Action = SMPS_ACTION;
	switch (Psmp)
	{
		case MMPS_ENABLE:
#ifdef RT30xx
			if (IS_RT3090(pAd))
			{
				// disable MMPS BBP control register
				RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &bbpdata);
				bbpdata &= ~(0x04);	//bit 2
				RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, bbpdata);

				// disable MMPS MAC control register
				RTMP_IO_READ32(pAd, 0x1210, &macdata);
				macdata &= ~(0x09);	//bit 0, 3
				RTMP_IO_WRITE32(pAd, 0x1210, macdata);
			}
#endif // RT30xx //
			Frame.Psmp = 0;
			break;
		case MMPS_DYNAMIC:
#ifdef RT30xx
			if (IS_RT3090(pAd))
			{
				// enable MMPS BBP control register
				RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &bbpdata);
				bbpdata |= 0x04;	//bit 2
				RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, bbpdata);

				// enable MMPS MAC control register
				RTMP_IO_READ32(pAd, 0x1210, &macdata);
				macdata |= 0x09;	//bit 0, 3
				RTMP_IO_WRITE32(pAd, 0x1210, macdata);
			}
#endif // RT30xx //
			Frame.Psmp = 3;
			break;
		case MMPS_STATIC:
#ifdef RT30xx
			if (IS_RT3090(pAd))
			{
				// enable MMPS BBP control register
				RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &bbpdata);
				bbpdata |= 0x04;	//bit 2
				RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, bbpdata);

				// enable MMPS MAC control register
				RTMP_IO_READ32(pAd, 0x1210, &macdata);
				macdata |= 0x09;	//bit 0, 3
				RTMP_IO_WRITE32(pAd, 0x1210, macdata);
			}
#endif // RT30xx //
			Frame.Psmp = 1;
			break;
	}
	MakeOutgoingFrame(pOutBuffer,               &FrameLen,
					  sizeof(FRAME_PSMP_ACTION),      &Frame,
					  END_OF_ARGS);
	MiniportMMRequest(pAd, QID_AC_BE, pOutBuffer, FrameLen);
	MlmeFreeMemory(pAd, pOutBuffer);
	DBGPRINT(RT_DEBUG_ERROR,("HT - SendPSMPAction( %d )  \n", Frame.Psmp));
}
开发者ID:ClarkChen633，项目名称:rtl819x-toolchain，代码行数:92，代码来源:ba_action.c


示例17: RT35xx_ChipBBPAdjust

VOID	RT35xx_ChipBBPAdjust(
	IN  RTMP_ADAPTER *pAd)
{
	UINT32 Value;
	UCHAR byteValue = 0;

#ifdef RT3593
	/* 3x3 device will not run AsicEvaluateRxAnt*/
	if (IS_RT3593(pAd))
	{
		UCHAR	BBPValue = 0;

		/* Receiver Antenna Selection*/
		RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &BBPValue);
		if(pAd->Antenna.field.RxPath == 3)
		{
			BBPValue |= (0x10);
		}
		else if(pAd->Antenna.field.RxPath == 2)
		{
			BBPValue |= (0x8);
		}
		else if(pAd->Antenna.field.RxPath == 1)
		{
			BBPValue |= (0x0);
		}
		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BBPValue);

		/*Number of transmitter chains*/
		RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R1, &BBPValue);
		BBPValue &= (~0x18);
		if (pAd->Antenna.field.TxPath == 3)
			BBPValue |= 0x10;
		else if (pAd->Antenna.field.TxPath == 2)
			BBPValue |= 0x08;
		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R1, BBPValue);		
	}
#endif /* RT3593 */

#ifdef DOT11_N_SUPPORT
	if ((pAd->CommonCfg.HtCapability.HtCapInfo.ChannelWidth  == BW_40) && 
		(pAd->CommonCfg.RegTransmitSetting.field.EXTCHA == EXTCHA_ABOVE))
	{
		pAd->CommonCfg.BBPCurrentBW = BW_40;
		pAd->CommonCfg.CentralChannel = pAd->CommonCfg.Channel + 2;
		/*  TX : control channel at lower */
		RTMP_IO_READ32(pAd, TX_BAND_CFG, &Value);
		Value &= (~0x1);
		RTMP_IO_WRITE32(pAd, TX_BAND_CFG, Value);

		/*  RX : control channel at lower */
		RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &byteValue);
		byteValue &= (~0x20);
		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, byteValue);

		RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &byteValue);
		byteValue &= (~0x18);
		byteValue |= 0x10;
		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, byteValue);

		if (pAd->CommonCfg.Channel > 14)
		{ 	/* request by Gary 20070208 for middle and long range A Band*/
			if (IS_RT3572(pAd))
				AsicBBPWriteWithRxChain(pAd, BBP_R66, 0x48, RX_CHAIN_ALL);
		}
		else
		{	/* request by Gary 20070208 for middle and long range G Band*/
			if (IS_RT3572(pAd))
				AsicBBPWriteWithRxChain(pAd, BBP_R66, 0x38, RX_CHAIN_ALL);
		}	

		if (pAd->MACVersion == 0x28600100)
		{
			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R69, 0x1A);
			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R70, 0x0A);
			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R73, 0x16);
		}
		else
		{
			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R69, 0x12);
			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R70, 0x0A);
			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R73, 0x10);
		}	

		DBGPRINT(RT_DEBUG_TRACE, ("ApStartUp : ExtAbove, ChannelWidth=%d, Channel=%d, ExtChanOffset=%d(%d) \n",
									pAd->CommonCfg.HtCapability.HtCapInfo.ChannelWidth, 
									pAd->CommonCfg.Channel, 
									pAd->CommonCfg.RegTransmitSetting.field.EXTCHA,
									pAd->CommonCfg.AddHTInfo.AddHtInfo.ExtChanOffset));
	}
	else if ((pAd->CommonCfg.Channel > 2) && 
			(pAd->CommonCfg.HtCapability.HtCapInfo.ChannelWidth  == BW_40) && 
			(pAd->CommonCfg.RegTransmitSetting.field.EXTCHA == EXTCHA_BELOW))
	{
		pAd->CommonCfg.BBPCurrentBW = BW_40;

		if (pAd->CommonCfg.Channel == 14)
			pAd->CommonCfg.CentralChannel = pAd->CommonCfg.Channel - 1;
		else
			pAd->CommonCfg.CentralChannel = pAd->CommonCfg.Channel - 2;
//.........这里部分代码省略.........
开发者ID:1950packard，项目名称:rt3573sta，代码行数:101，代码来源:rt35xx.c


示例18: RT30xxLoadRFNormalModeSetup

/*
	==========================================================================
	Description:

	Load RF normal operation-mode setup
	
	==========================================================================
 */
VOID RT30xxLoadRFNormalModeSetup(
	IN PRTMP_ADAPTER 	pAd)
{
	UCHAR RFValue, bbpreg = 0;

	{
		// improve power consumption 
		RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R138, &bbpreg);
		if (pAd->Antenna.field.TxPath == 1)
		{
			// turn off tx DAC_1
			bbpreg = (bbpreg | 0x20);
		}

		if (pAd->Antenna.field.RxPath == 1)
		{
			// turn off tx ADC_1
			bbpreg &= (~0x2);
		}
		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R138, bbpreg);
	}
#ifdef RT53xx
	if (IS_RT5390(pAd))
	{
		
		RT30xxReadRFRegister(pAd, RF_R38, (PUCHAR)&RFValue);
		RFValue = ((RFValue & ~0x20) | 0x00); // rx_lo1_en (enable RX LO1, 0: LO1 follows TR switch)
		RT30xxWriteRFRegister(pAd, RF_R38, (UCHAR)RFValue);

		RT30xxReadRFRegister(pAd, RF_R39, (PUCHAR)&RFValue);
		RFValue = ((RFValue & ~0x80) | 0x00); // rx_lo2_en (enable RX LO2, 0: LO2 follows TR switch)
		RT30xxWriteRFRegister(pAd, RF_R39, (UCHAR)RFValue);

		//
		// Avoid data lost and CRC error
		//
		RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &bbpreg);
		bbpreg = ((bbpreg & ~0x40) | 0x40); // MAC interface control (MAC_IF_80M, 1: 80 MHz)
		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, bbpreg);

		RT30xxReadRFRegister(pAd, RF_R30, (PUCHAR)&RFValue);
		RFValue = ((RFValue & ~0x18) | 0x10); // rxvcm (Rx BB filter VCM)
		RT30xxWriteRFRegister(pAd, RF_R30, (UCHAR)RFValue);
	}
	else
#endif //RT53xx //
	{		
		// RX0_PD & TX0_PD, RF R1 register Bit 2 & Bit 3 to 0 and RF_BLOCK_en,RX1_PD & TX1_PD, Bit0, Bit 4 & Bit5 to 1
		RT30xxReadRFRegister(pAd, RF_R01, &RFValue);
		RFValue = (RFValue & (~0x0C)) | 0x31;
		RT30xxWriteRFRegister(pAd, RF_R01, RFValue);

		// TX_LO2_en, RF R15 register Bit 3 to 0
		RT30xxReadRFRegister(pAd, RF_R15, &RFValue);
		RFValue &= (~0x08);
		RT30xxWriteRFRegister(pAd, RF_R15, RFValue);


		// TX_LO1_en, RF R17 register Bit 3 to 0
		RT30xxReadRFRegister(pAd, RF_R17, &RFValue);
		RFValue &= (~0x08);
		// to fix rx long range issue
		if (((pAd->MACVersion & 0xffff) >= 0x0211) && (pAd->NicConfig2.field.ExternalLNAForG == 0))
		{
			RFValue |= 0x20;
		}
		// set RF_R17_bit[2:0] equal to EEPROM setting at 0x48h
		if (pAd->TxMixerGain24G >= 2)
		{
			RFValue &= (~0x7);  // clean bit [2:0]
			RFValue |= pAd->TxMixerGain24G;
		}
		RT30xxWriteRFRegister(pAd, RF_R17, RFValue);

		// RX_LO1_en, RF R20 register Bit 3 to 0
		RT30xxReadRFRegister(pAd, RF_R20, &RFValue);
		RFValue &= (~0x08);
		RT30xxWriteRFRegister(pAd, RF_R20, RFValue);

		// RX_LO2_en, RF R21 register Bit 3 to 0
		RT30xxReadRFRegister(pAd, RF_R21, &RFValue);
		RFValue &= (~0x08);
		RT30xxWriteRFRegister(pAd, RF_R21, RFValue);
	}
}
开发者ID:schidler，项目名称:flyzjhz-rt-n56u，代码行数:93，代码来源:rt30xx.c


示例19: ScanNextChannel

/*
	==========================================================================
	Description:
		Scan next channel
	==========================================================================
 */
VOID ScanNextChannel(
	IN PRTMP_ADAPTER pAd) 
{
	HEADER_802_11   Hdr80211;
	PUCHAR          pOutBuffer = NULL;
	NDIS_STATUS     NStatus;
	ULONG           FrameLen = 0;
	UCHAR           SsidLen = 0, ScanType = pAd->MlmeAux.ScanType, BBPValue = 0;
	UINT			ScanTimeIn5gChannel = SHORT_CHANNEL_TIME;
	BOOLEAN			ScanPending = FALSE;


#ifdef RALINK_ATE
	// Nothing to do in ATE mode. 
	if (ATE_ON(pAd))
		return;
#endif // RALINK_ATE //

	if ((pAd->MlmeAux.Channel == 0) || ScanPending) 
	{
		if ((pAd->CommonCfg.BBPCurrentBW == BW_40)
			)
		{
			AsicSwitchChannel(pAd, pAd->CommonCfg.CentralChannel, FALSE);
			AsicLockChannel(pAd, pAd->CommonCfg.CentralChannel);
			RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &BBPValue);
			BBPValue &= (~0x18);
			BBPValue |= 0x10;
			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, BBPValue);
			DBGPRINT(RT_DEBUG_TRACE, ("SYNC - End of SCAN, restore to 40MHz channel %d, Total BSS[%02d]\n",pAd->CommonCfg.CentralChannel, pAd->ScanTab.BssNr));
		}
		else
		{
			AsicSwitchChannel(pAd, pAd->CommonCfg.Channel, FALSE);
			AsicLockChannel(pAd, pAd->CommonCfg.Channel);
			DBGPRINT(RT_DEBUG_TRACE, ("SYNC - End of SCAN, restore to channel %d, Total BSS[%02d]\n",pAd->CommonCfg.Channel, pAd->ScanTab.BssNr));
		}
		

#ifdef CONFIG_AP_SUPPORT
		IF_DEV_CONFIG_OPMODE_ON_AP(pAd)
		{
			pAd->Mlme.ApSyncMachine.CurrState = AP_SYNC_IDLE;
			RTMPResumeMsduTransmission(pAd);

			// iwpriv set auto channel selection
			// scanned all channels
			if (pAd->ApCfg.bAutoChannelAtBootup==TRUE)
			{
			    pAd->CommonCfg.Channel = SelectBestChannel(pAd, pAd->ApCfg.AutoChannelAlg);
				pAd->ApCfg.bAutoChannelAtBootup = FALSE;
#ifdef DOT11_N_SUPPORT
				N_ChannelCheck(pAd);
#endif // DOT11_N_SUPPORT //
				APStop(pAd);
				APStartUp(pAd);
			}

			if (!((pAd->CommonCfg.Channel > 14) && (pAd->CommonCfg.bIEEE80211H == TRUE)))
			{
				AsicEnableBssSync(pAd);
			}
		}
#endif // CONFIG_AP_SUPPORT //


	} 
	else 
	{
开发者ID:schidler，项目名称:flyzjhz-rt-n56u，代码行数:75，代码来源:cmm_sync.c


示例20: RT3593_PostBBPInitialization

//
// Post-process the BBP registers based on the chip model
//
// Parameters
//	pAd: The adapter data structure
//
// Return Value
//	None
//
static VOID RT3593_PostBBPInitialization(
	IN PRTMP_ADAPTER pAd)
{
	BBP_R105_STRUC BBPR105 = { { 0 } };
	BBP_R106_STRUC BBPR106 = { { 0 } };
	
	DBGPRINT(RT_DEBUG_TRACE, ("--> %s\n", __FUNCTION__));

	//
	// The channel estimation updates based on remodulation of L-SIG and HT-SIG symbols.
	//
	RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R105, &BBPR105.byte);

// Disable re-modulation until further verificaiton (poor Rx throughput with Atheros APs)
/*
	if (IS_RT3090A(pAd))
	{
		BBPR105.field.EnableSIGRemodulation = 1; // The channel estimation updates based on remodulation of L-SIG and HT-SIG symbols.
	}
	else
	{
		BBPR105.field.EnableSIGRemodulation = 0;
	}
*/

	//
	// Apply Maximum Likelihood Detection (MLD) for 2 stream case (reserved field if single RX)
	//
	if (pAd->Antenna.field.RxPath == 1) // Single RX
	{
		BBPR105.field.MLDFor2Stream = 0;
	}
	else
	{
		BBPR105.field.MLDFor2Stream = 1;
	}

	RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R105, BBPR105.byte);

	DBGPRINT(RT_DEBUG_TRACE, ("%s: BBP_R105: BBPR105.field.EnableSIGRemodulation = %d, BBPR105.field.MLDFor2Stream = %d\n", 
		__FUNCTION__, 
		BBPR105.field.EnableSIGRemodulation, 
		BBPR105.field.MLDFor2Stream));

//	if (IS_RT3593(pAd))
	{
		RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R106, &BBPR106.byte);

		BBPR106.field.ShortGI_Offset20 = 0x06; // Delay GI remover when the short GI is detected in 20MHz band (20M sampling rate)
		BBPR106.field.ShortGI_Offset40 = 0x08; // Delay GI remover when the short GI is detected in 40MHz band (40M sampling rate)
		
		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R106, BBPR106.byte);

		DBGPRINT(RT_DEBUG_TRACE, ("%s: BBPR106: BBPR106.field.ShortGI_Offset20 = %d, BBPR106.field.ShortGI_Offset40 = %d\n", 
			__FUNCTION__, 
			BBPR106.field.ShortGI_Offset20, 
			BBPR106.field.ShortGI_Offset40));

//		if (IS_RT3593(pAd))
		{
			// Patch wrong default value for SNR2 report
			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R142, 0x04);
			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R143, 0x3b);
		}
	}

	DBGPRINT(RT_DEBUG_TRACE, ("<-- %s\n", __FUNCTION__));
} /* End of RT3593_PostBBPInitialization */
开发者ID:eagleworld，项目名称:RT3070_SoftAP，代码行数:77，代码来源:rt3593.c



注：本文中的RTMP_BBP_IO_READ8_BY_REG_ID函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花
握手
雷人
路过
鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
More+
上一篇：
C++ RTMP_BBP_IO_WRITE8_BY_REG_ID函数代码示例发布时间：2022-05-30
下一篇：
C++ RTMPZeroMemory函数代码示例发布时间：2022-05-30
热门推荐
More+
热门话题
More+
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服（服务时间 9:00～18:00）

在线QQ客服
地址：深圳市南山区西丽大学城创智工业园
电邮：jeky_zhao#qq.com
移动电话：139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap