• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号
登陆 注册

C++ RTMPZeroMemory函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中RTMPZeroMemory函数的典型用法代码示例。如果您正苦于以下问题：C++ RTMPZeroMemory函数的具体用法？C++ RTMPZeroMemory怎么用？C++ RTMPZeroMemory使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了RTMPZeroMemory函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: RTMPUpdateHTIE

/*
	========================================================================
	Routine Description:
		Update HT IE from our capability.
		
	Arguments:
		Send all HT IE in beacon/probe rsp/assoc rsp/action frame.
		
	
	========================================================================
*/
VOID RTMPUpdateHTIE(
	IN RT_HT_CAPABILITY	*pRtHt,
	IN UCHAR *pMcsSet,
	OUT HT_CAPABILITY_IE *pHtCapability,
	OUT ADD_HT_INFO_IE *pAddHtInfo)
{
	RTMPZeroMemory(pHtCapability, sizeof(HT_CAPABILITY_IE));
	RTMPZeroMemory(pAddHtInfo, sizeof(ADD_HT_INFO_IE));
	
		pHtCapability->HtCapInfo.ChannelWidth = pRtHt->ChannelWidth;
		pHtCapability->HtCapInfo.MimoPs = pRtHt->MimoPs;
		pHtCapability->HtCapInfo.GF = pRtHt->GF;
		pHtCapability->HtCapInfo.ShortGIfor20 = pRtHt->ShortGIfor20;
		pHtCapability->HtCapInfo.ShortGIfor40 = pRtHt->ShortGIfor40;
		pHtCapability->HtCapInfo.TxSTBC = pRtHt->TxSTBC;
		pHtCapability->HtCapInfo.RxSTBC = pRtHt->RxSTBC;
		pHtCapability->HtCapInfo.AMsduSize = pRtHt->AmsduSize;
		pHtCapability->HtCapParm.MaxRAmpduFactor = pRtHt->MaxRAmpduFactor;
		pHtCapability->HtCapParm.MpduDensity = pRtHt->MpduDensity;

		pAddHtInfo->AddHtInfo.ExtChanOffset = pRtHt->ExtChanOffset ;
		pAddHtInfo->AddHtInfo.RecomWidth = pRtHt->RecomWidth;
		pAddHtInfo->AddHtInfo2.OperaionMode = pRtHt->OperaionMode;
		pAddHtInfo->AddHtInfo2.NonGfPresent = pRtHt->NonGfPresent;
		RTMPMoveMemory(pAddHtInfo->MCSSet, /*pRtHt->MCSSet*/pMcsSet, 4); /* rt2860 only support MCS max=32, no need to copy all 16 uchar.*/
	
        DBGPRINT(RT_DEBUG_TRACE,("RTMPUpdateHTIE <== \n"));
}
开发者ID:derekcentrico，项目名称:m6.kernel.3.x，代码行数:39，代码来源:mgmt_ht.c


示例2: RTMPDisableDesiredHtInfo

/*
	========================================================================
	Routine Description:
		Clear the desire HT info per interface

	Arguments:

	========================================================================
*/
VOID RTMPDisableDesiredHtInfo(struct rtmp_adapter *pAd)
{
	struct rtmp_wifi_dev *wdev;

#ifdef CONFIG_AP_SUPPORT
	UINT8 idx = 0;

	IF_DEV_CONFIG_OPMODE_ON_AP(pAd)
	{
		for (idx = 0; idx < pAd->ApCfg.BssidNum; idx++)
		{
			wdev = &pAd->ApCfg.MBSSID[idx].wdev;
			RTMPZeroMemory(&wdev->DesiredHtPhyInfo, sizeof(RT_PHY_INFO));
		}
	}
#endif /* CONFIG_AP_SUPPORT */

#ifdef CONFIG_STA_SUPPORT
	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
	{
		RTMPZeroMemory(&pAd->StaCfg.wdev.DesiredHtPhyInfo, sizeof(RT_PHY_INFO));
	}
#endif /* CONFIG_STA_SUPPORT */

}
开发者ID:ulli-kroll，项目名称:mt7612u，代码行数:34，代码来源:mgmt_ht.c


示例3: RTMPDisableDesiredHtInfo

/*
	========================================================================
	Routine Description:
		Clear the desire HT info per interface
		
	Arguments:
	
	========================================================================
*/
VOID RTMPDisableDesiredHtInfo(
	IN	PRTMP_ADAPTER		pAd)
{
#ifdef CONFIG_AP_SUPPORT
	UINT8				apidx = 0;
#endif /* CONFIG_AP_SUPPORT */

#ifdef CONFIG_AP_SUPPORT
	IF_DEV_CONFIG_OPMODE_ON_AP(pAd)
	{
		for (apidx = 0; apidx < pAd->ApCfg.BssidNum; apidx++)
		{				
			RTMPZeroMemory(&pAd->ApCfg.MBSSID[apidx].DesiredHtPhyInfo, sizeof(RT_PHY_INFO));
		}
#ifdef WDS_SUPPORT
		for (apidx = 0; apidx < MAX_WDS_ENTRY; apidx++)
		{				
			RTMPZeroMemory(&pAd->WdsTab.WdsEntry[apidx].DesiredHtPhyInfo, sizeof(RT_PHY_INFO));
		}
#endif /* WDS_SUPPORT */
#ifdef APCLI_SUPPORT
		for (apidx = 0; apidx < MAX_APCLI_NUM; apidx++)
		{				
			RTMPZeroMemory(&pAd->ApCfg.ApCliTab[apidx].DesiredHtPhyInfo, sizeof(RT_PHY_INFO));
		}
#endif /* APCLI_SUPPORT */
	}
#endif /* CONFIG_AP_SUPPORT */


}
开发者ID:derekcentrico，项目名称:m6.kernel.3.x，代码行数:40，代码来源:mgmt_ht.c


示例4: RTMPDisableDesiredHtInfo

/*
	========================================================================
	Routine Description:
		Clear the desire HT info per interface
		
	Arguments:
	
	========================================================================
*/
VOID RTMPDisableDesiredHtInfo(RTMP_ADAPTER *pAd)
{
	struct wifi_dev *wdev = NULL;
#ifdef CONFIG_AP_SUPPORT
	UINT8 idx = 0;

	IF_DEV_CONFIG_OPMODE_ON_AP(pAd)
	{
		for (idx = 0; idx < pAd->ApCfg.BssidNum; idx++)
		{
			wdev = &pAd->ApCfg.MBSSID[idx].wdev;
			RTMPZeroMemory(&wdev->DesiredHtPhyInfo, sizeof(RT_PHY_INFO));
		}
#ifdef WDS_SUPPORT
		for (idx = 0; idx < MAX_WDS_ENTRY; idx++)
		{				
			RTMPZeroMemory(&pAd->WdsTab.WdsEntry[idx].wdev.DesiredHtPhyInfo, sizeof(RT_PHY_INFO));
		}
#endif /* WDS_SUPPORT */
#ifdef APCLI_SUPPORT
		for (idx = 0; idx < MAX_APCLI_NUM; idx++)
		{				
			RTMPZeroMemory(&pAd->ApCfg.ApCliTab[idx].wdev.DesiredHtPhyInfo, sizeof(RT_PHY_INFO));
		}
#endif /* APCLI_SUPPORT */
	}
#endif /* CONFIG_AP_SUPPORT */


}
开发者ID:AnyoeDove，项目名称:mtk-sources，代码行数:39，代码来源:mgmt_ht.c


示例5: ComposePsPoll

VOID ComposePsPoll(RTMP_ADAPTER *pAd)
{
	TXINFO_STRUC *pTxInfo;
	TXWI_STRUC *pTxWI;
	UINT8 TXWISize = pAd->chipCap.TXWISize;
	UCHAR *buf;
	USHORT data_len;


	DBGPRINT(RT_DEBUG_TRACE, ("ComposePsPoll\n"));
	NdisZeroMemory(&pAd->PsPollFrame, sizeof (PSPOLL_FRAME));

	pAd->PsPollFrame.FC.PwrMgmt = 0;
	pAd->PsPollFrame.FC.Type = BTYPE_CNTL;
	pAd->PsPollFrame.FC.SubType = SUBTYPE_PS_POLL;
	pAd->PsPollFrame.Aid = pAd->StaActive.Aid | 0xC000;
	COPY_MAC_ADDR(pAd->PsPollFrame.Bssid, pAd->CommonCfg.Bssid);
	COPY_MAC_ADDR(pAd->PsPollFrame.Ta, pAd->CurrentAddress);

	buf = &pAd->PsPollContext.TransferBuffer->field.WirelessPacket[0];
	pTxInfo = (TXINFO_STRUC *)buf;
	pTxWI = (TXWI_STRUC *)&buf[TXINFO_SIZE];
	RTMPZeroMemory(buf, 100);
	data_len = sizeof (PSPOLL_FRAME);
	rlt_usb_write_txinfo(pAd, pTxInfo, data_len + TXWISize + TSO_SIZE, TRUE, 
						EpToQueue[MGMTPIPEIDX], FALSE, FALSE);
	RTMPWriteTxWI(pAd, pTxWI, FALSE, FALSE, FALSE, FALSE, TRUE, FALSE, 0,
		      BSSID_WCID, data_len, 0, 0,
		      (UCHAR) pAd->CommonCfg.MlmeTransmit.field.MCS,
		      IFS_BACKOFF, FALSE, &pAd->CommonCfg.MlmeTransmit);
	RTMPMoveMemory((VOID *)&buf[TXWISize + TXINFO_SIZE + TSO_SIZE], (VOID *)&pAd->PsPollFrame, data_len);
	/* Append 4 extra zero bytes. */
	pAd->PsPollContext.BulkOutSize = TXINFO_SIZE + TXWISize + TSO_SIZE + data_len + 4;
}
开发者ID:557i，项目名称:mt7610u_wifi_sta_v3002_dpo_20130916，代码行数:34，代码来源:cmm_data_usb.c


示例6: ComposeNullFrame

/* IRQL = DISPATCH_LEVEL */
VOID ComposeNullFrame(RTMP_ADAPTER *pAd)
{
	TXINFO_STRUC *pTxInfo;
	TXWI_STRUC *pTxWI;
	UCHAR *buf;
	UINT8 TXWISize = pAd->chipCap.TXWISize;
	USHORT data_len = sizeof(pAd->NullFrame);;


	NdisZeroMemory(&pAd->NullFrame, data_len);
	pAd->NullFrame.FC.Type = BTYPE_DATA;
	pAd->NullFrame.FC.SubType = SUBTYPE_NULL_FUNC;
	pAd->NullFrame.FC.ToDs = 1;
	COPY_MAC_ADDR(pAd->NullFrame.Addr1, pAd->CommonCfg.Bssid);
	COPY_MAC_ADDR(pAd->NullFrame.Addr2, pAd->CurrentAddress);
	COPY_MAC_ADDR(pAd->NullFrame.Addr3, pAd->CommonCfg.Bssid);
	buf = &pAd->NullContext.TransferBuffer->field.WirelessPacket[0];
	RTMPZeroMemory(buf, 100);
	pTxInfo = (TXINFO_STRUC *)buf;
	pTxWI = (TXWI_STRUC *)&buf[TXINFO_SIZE];
	rlt_usb_write_txinfo(pAd, pTxInfo,
			(USHORT)(data_len + TXWISize + TSO_SIZE), TRUE,
			EpToQueue[MGMTPIPEIDX], FALSE, FALSE);
	RTMPWriteTxWI(pAd, pTxWI, FALSE, FALSE, FALSE, FALSE, TRUE, FALSE, 0,
		      BSSID_WCID, data_len, 0, 0,
		      (UCHAR)pAd->CommonCfg.MlmeTransmit.field.MCS,
		      IFS_BACKOFF, FALSE, &pAd->CommonCfg.MlmeTransmit);
	RTMPMoveMemory((VOID *)&buf[TXWISize + TXINFO_SIZE], (VOID *)&pAd->NullFrame, data_len);
	pAd->NullContext.BulkOutSize = TXINFO_SIZE + TXWISize + TSO_SIZE + data_len + 4;
}
开发者ID:557i，项目名称:mt7610u_wifi_sta_v3002_dpo_20130916，代码行数:31，代码来源:cmm_data_usb.c


示例7: P2pPerstTabDelete

UCHAR P2pPerstTabDelete(
	IN PRTMP_ADAPTER pAd,
	IN UCHAR	*pMacList) 
{
	PRT_P2P_TABLE	Tab = &pAd->P2pTable;
	UCHAR		i;
	
	for (i = 0; i < MAX_P2P_TABLE_SIZE; i++)
	{		
		if (Tab->PerstEntry[i].bValid == TRUE)
		{
			if (NdisEqualMemory(Tab->PerstEntry[i].Addr, pMacList, 6))
			{
				RTMPZeroMemory(&Tab->PerstEntry[i], sizeof(RT_P2P_PERSISTENT_ENTRY));
				Tab->PerstEntry[i].bValid = FALSE;

				if (Tab->PerstNumber > 0)
				{
					Tab->PerstNumber--;
				}
				else
					DBGPRINT(RT_DEBUG_ERROR, (" P2P - Persistent table count error. \n"));

				DBGPRINT(RT_DEBUG_ERROR, (" P2P - Delete a Persistent Entry .Table Number = %d. \n",  Tab->PerstNumber));
			}
				
			return i;
		}
	}
	return 0xff;

}
开发者ID:Brainiarc7，项目名称:ralink_sdk，代码行数:32，代码来源:p2p_table.c


示例8: P2pGroupTabInit

/*	
	==========================================================================
	Description: 
		Init P2P Group Table.
		
	Parameters: 
	Note:
		 
	==========================================================================
 */
VOID P2pGroupTabInit(
	IN PRTMP_ADAPTER pAd) 
{
	PRT_P2P_TABLE	Tab = &pAd->P2pTable;
	UCHAR		i;
	
	DBGPRINT(RT_DEBUG_ERROR, ("P2pGroupTabInit .  \n"));
	for (i = 0; i < MAX_P2P_GROUP_SIZE; i++)
	{		
		Tab->Client[i].P2pClientState = P2PSTATE_NONE;
		Tab->Client[i].Rule = P2P_IS_CLIENT;
		Tab->Client[i].DevCapability = 0;
		Tab->Client[i].GroupCapability = 0;
		RTMPZeroMemory(Tab->Client[i].addr, MAC_ADDR_LEN);
		RTMPZeroMemory(Tab->Client[i].bssid, MAC_ADDR_LEN);
		RTMPZeroMemory(Tab->Client[i].InterfaceAddr, MAC_ADDR_LEN);
		RTMPZeroMemory(Tab->Client[i].Ssid, MAX_LEN_OF_SSID);
		RTMPZeroMemory(Tab->Client[i].PrimaryDevType, P2P_DEVICE_TYPE_LEN);
		RTMPZeroMemory(Tab->Client[i].SecondaryDevType, P2P_DEVICE_TYPE_LEN);
		RTMPZeroMemory(Tab->Client[i].DeviceName, P2P_DEVICE_NAME_LEN);
		Tab->Client[i].DeviceNameLen = 0;
		Tab->Client[i].SsidLen = 0;
		Tab->Client[i].GoIntent = 0;
		Tab->Client[i].OpChannel = 0;
		Tab->Client[i].ListenChannel = 0;
		Tab->Client[i].ConfigMethod = 0;
		Tab->Client[i].P2pClientState = P2PSTATE_NONE;
		Tab->Client[i].StateCount = 0;
		Tab->Client[i].bValid = FALSE;

	}
	Tab->ClientNumber = 0;
	return;
}
开发者ID:Brainiarc7，项目名称:ralink_sdk，代码行数:44，代码来源:p2p_table.c


示例9: ApCliSiteSurvey

VOID ApCliSiteSurvey(
	IN	RTMP_ADAPTER  		*pAd,
	IN	UCHAR			ifIndex,
	IN	NDIS_802_11_SSID	*pSsid,
	IN	UCHAR				ScanType,
	IN	BOOLEAN				ChannelSel)
{
	MLME_SCAN_REQ_STRUCT    ScanReq;

	if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS))
	{
		/*	
		* Still scanning, ignore this scan.
		*/
		DBGPRINT(RT_DEBUG_TRACE, ("ApCliSiteSurvey:: scanning now\n"));
		return;
	}

	if(ifIndex >= MAX_APCLI_NUM)
		return;

#ifdef WSC_AP_SUPPORT
    if ((pAd->ApCfg.ApCliTab[ifIndex].WscControl.WscConfMode != WSC_DISABLE) &&
    	(pAd->ApCfg.ApCliTab[ifIndex].WscControl.bWscTrigger == TRUE))
    {
       DBGPRINT(RT_DEBUG_TRACE, ("%s(): Stop scanning due to WPS triggered!\n",__FUNCTION__));
       return;
    }
#endif /* WSC_AP_SUPPORT */

	AsicDisableSync(pAd);

#ifdef AP_PARTIAL_SCAN_SUPPORT
	if (((pAd->ApCfg.bPartialScanning == TRUE) && (pAd->ApCfg.LastPartialScanChannel == 0)) ||
		(pAd->ApCfg.bPartialScanning == FALSE))
#endif /* AP_PARTIAL_SCAN_SUPPORT */
	{
		BssTableInit(&pAd->ScanTab);
	}
	pAd->Mlme.ApSyncMachine.CurrState = AP_SYNC_IDLE;
	pAd->ApCfg.ApCliTab[ifIndex].SyncCurrState = APCLI_SYNC_IDLE;

	RTMPZeroMemory(ScanReq.Ssid, MAX_LEN_OF_SSID);
	ScanReq.SsidLen = 0;
	if (pSsid)
	{
	    ScanReq.SsidLen = pSsid->SsidLength;
	    NdisMoveMemory(ScanReq.Ssid, pSsid->Ssid, pSsid->SsidLength);
	}
    ScanReq.BssType = BSS_ANY;
    ScanReq.ScanType = ScanType;
    pAd->ApCfg.bAutoChannelAtBootup = ChannelSel;
    
    MlmeEnqueue(pAd, APCLI_SYNC_STATE_MACHINE, APCLI_MT2_MLME_SCAN_REQ, sizeof(MLME_SCAN_REQ_STRUCT), &ScanReq, 0);
    RTMP_MLME_HANDLER(pAd);
}
开发者ID:andy-padavan，项目名称:rt-n56u，代码行数:56，代码来源:apcli_sync.c


示例10: P2pCrednTabDelete

VOID P2pCrednTabDelete(
	IN PRTMP_ADAPTER pAd,
	IN UCHAR	*pAddr) 
{

	PRT_P2P_TABLE	Tab = &pAd->P2pTable;
	UCHAR		i;
	/*UCHAR		Zero[6] = {0,0,0,0,0,0}; */
	
	DBGPRINT(RT_DEBUG_ERROR, (" P2P - P2pCrednTabDelete \n"));
	for (i = 0; i < MAX_P2P_TABLE_SIZE; i++)
	{	
		if (RTMPEqualMemory(pAddr, Tab->TempCredential[i].InterAddr, MAC_ADDR_LEN))
		{
			Tab->TempCredential[i].bValid = FALSE;
			RTMPZeroMemory(Tab->TempCredential[i].InterAddr, MAC_ADDR_LEN);
			RTMPZeroMemory(&Tab->TempCredential[i].Profile, sizeof(WSC_CREDENTIAL));
		}
	}
	
}
开发者ID:Brainiarc7，项目名称:ralink_sdk，代码行数:21，代码来源:p2p_table.c


示例11: P2pGroupTabDelete

UCHAR P2pGroupTabDelete(
	IN PRTMP_ADAPTER pAd, 
	IN UCHAR    p2pindex, 
	IN PUCHAR    Addr) 
{
	UCHAR	index = 0xff;
	PRT_P2P_CLIENT_ENTRY		pP2pEntry;

	if ((p2pindex >= MAX_P2P_GROUP_SIZE) && (Addr != NULL))
		index = P2pGroupTabSearch(pAd, Addr);
	else
		index = p2pindex;
	
	DBGPRINT(RT_DEBUG_TRACE,("P2pGroupTabDelete . index = %d. \n", index));
	if (index < MAX_P2P_GROUP_SIZE)
	{
		pP2pEntry = &pAd->P2pTable.Client[index];
		/* Before connected, there is WPS provisioning process. */
		/* So maybe receive disassoc frame. but we can't delete p2p client entry . */
		/* So need to check P2pClientState is connected, then we can delete the entry. */
		DBGPRINT(RT_DEBUG_ERROR, ("P2pGroupTabDelete  index %d.  search addr[3~5] is %x %x %x\n", index, Addr[3],Addr[4],Addr[5]));
		
		RTMPZeroMemory(pP2pEntry->addr, MAC_ADDR_LEN);
		RTMPZeroMemory(pP2pEntry->bssid, MAC_ADDR_LEN);
		RTMPZeroMemory(pP2pEntry->InterfaceAddr, MAC_ADDR_LEN);
		/* Assign a strange address first. */
		pP2pEntry->addr[3] = 0x55;
		pP2pEntry->bssid[3] = 0x55;
		pP2pEntry->InterfaceAddr[3] = 0x55;
		RTMPZeroMemory(pP2pEntry->PrimaryDevType, P2P_DEVICE_TYPE_LEN);
		RTMPZeroMemory(pP2pEntry->SecondaryDevType, P2P_DEVICE_TYPE_LEN);
		RTMPZeroMemory(pP2pEntry->DeviceName, P2P_DEVICE_NAME_LEN);
		pP2pEntry->NumSecondaryType = 0;
		pP2pEntry->DeviceNameLen = 0;
		pP2pEntry->ConfigMethod = 0;
		pP2pEntry->OpChannel = 0;
		pP2pEntry->ListenChannel = 0;
		pP2pEntry->Dpid = DEV_PASS_ID_NOSPEC;
		pP2pEntry->MyGOIndex = 0xff;
		pP2pEntry->Peerip = 0;
		pP2pEntry->ConfigTimeOut = 0;
		pP2pEntry->Rule = P2P_IS_CLIENT;

		RTMPZeroMemory(pP2pEntry->Ssid, MAX_LEN_OF_SSID);
		pP2pEntry->SsidLen = 0;
		pP2pEntry->GoIntent = 0;
		if ((pAd->P2pTable.ClientNumber > 0) && (pP2pEntry->P2pClientState != P2PSTATE_NONE))
			pAd->P2pTable.ClientNumber--;
		
		pP2pEntry->P2pClientState = P2PSTATE_NONE;
	}

	return index;

}
开发者ID:Brainiarc7，项目名称:ralink_sdk，代码行数:55，代码来源:p2p_table.c


示例12: Set_P2P_Reset_Proc

INT Set_P2P_Reset_Proc(
	IN	PRTMP_ADAPTER	pAd, 
	IN	PSTRING			arg)
{
	/*UINT32 DiscPerd = 0;*/
	POS_COOKIE			pObj;
	PRT_P2P_CONFIG	pP2PCtrl = &pAd->P2pCfg;

	pObj = (POS_COOKIE) pAd->OS_Cookie;
	if (pObj->ioctl_if_type != INT_P2P)
		return 0;

	if (P2P_CLI_ON(pAd))
		P2P_CliStop(pAd);
	else if (P2P_GO_ON(pAd))
	{
		P2P_GoStop(pAd);
		if (INFRA_ON(pAd))
			AsicEnableBssSync(pAd);
	}
	P2PCfgInit(pAd);
	P2pGroupTabInit(pAd);
	pP2PCtrl->Rule = P2P_IS_DEVICE;
	pAd->flg_p2p_OpStatusFlags = P2P_DISABLE;
	pP2PCtrl->ConfigMethod = 0x188;
	pAd->ApCfg.MBSSID[MAIN_MBSSID].WscControl.WscConfStatus = WSC_SCSTATE_UNCONFIGURED;
	pP2PCtrl->GoFormCurrentState = P2P_GO_FORM_IDLE;
	pP2PCtrl->DiscCurrentState = P2P_DISC_IDLE;
	pP2PCtrl->CtrlCurrentState = P2P_CTRL_IDLE;
	NdisZeroMemory(&pP2PCtrl->P2pCounter, sizeof(P2P_COUNTER_STRUCT));	
	P2pSetListenIntBias(pAd, 3);
	RTMPZeroMemory(pAd->P2pCfg.SSID, MAX_LEN_OF_SSID);
	RTMPMoveMemory(pAd->P2pCfg.SSID, WILDP2PSSID, WILDP2PSSIDLEN);
	pP2PCtrl->SSIDLen = WILDP2PSSIDLEN;
	/* Set Dpid to "not specified". it means, GUI doesn't set for connection yet. */
	pP2PCtrl->Dpid = DEV_PASS_ID_NOSPEC;
	RTMPZeroMemory(pAd->P2pCfg.ConnectingMAC, MAC_ADDR_LEN);
	return TRUE;
}
开发者ID:0x000000FF，项目名称:MT7601u，代码行数:39，代码来源:p2p_dbg.c


示例13: RtmpUSBNullFrameKickOut

VOID RtmpUSBNullFrameKickOut(
	IN RTMP_ADAPTER *pAd,
	IN UCHAR QueIdx,
	IN UCHAR *pNullFrame,
	IN UINT32 frameLen)
{
	if (pAd->NullContext.InUse == FALSE)
	{
		PTX_CONTEXT pNullContext;
		TXINFO_STRUC *pTxInfo;
		TXWI_STRUC *pTxWI;
		UCHAR *pWirelessPkt;
		UINT8 TXWISize = pAd->chipCap.TXWISize;

		pNullContext = &(pAd->NullContext);

		/* Set the in use bit*/
		pNullContext->InUse = TRUE;
		pWirelessPkt = (PUCHAR)&pNullContext->TransferBuffer->field.WirelessPacket[0];

		RTMPZeroMemory(&pWirelessPkt[0], 100);
		pTxInfo = (TXINFO_STRUC *)&pWirelessPkt[0];
		rlt_usb_write_txinfo(pAd, pTxInfo, (USHORT)(frameLen + TXWISize + TSO_SIZE), TRUE, EpToQueue[MGMTPIPEIDX], FALSE,  FALSE);
		pTxInfo->TxInfoQSEL = FIFO_EDCA;
		pTxWI = (TXWI_STRUC *)&pWirelessPkt[TXINFO_SIZE];
		RTMPWriteTxWI(pAd, pTxWI,  FALSE, FALSE, FALSE, FALSE, TRUE, FALSE, 0, BSSID_WCID, frameLen,
			0, 0, (UCHAR)pAd->CommonCfg.MlmeTransmit.field.MCS, IFS_HTTXOP, FALSE, &pAd->CommonCfg.MlmeTransmit);
#ifdef RT_BIG_ENDIAN
		RTMPWIEndianChange(pAd, (PUCHAR)pTxWI, TYPE_TXWI);
#endif /* RT_BIG_ENDIAN */
		RTMPMoveMemory(&pWirelessPkt[TXWISize + TXINFO_SIZE + TSO_SIZE], pNullFrame, frameLen);
#ifdef RT_BIG_ENDIAN
		RTMPFrameEndianChange(pAd, (PUCHAR)&pWirelessPkt[TXINFO_SIZE + TXWISize + TSO_SIZE], DIR_WRITE, FALSE);
#endif /* RT_BIG_ENDIAN */
		pAd->NullContext.BulkOutSize =  TXINFO_SIZE + TXWISize + TSO_SIZE + frameLen + 4;
		pAd->NullContext.BulkOutSize = ( pAd->NullContext.BulkOutSize + 3) & (~3);

		/* Fill out frame length information for global Bulk out arbitor*/
		/*pNullContext->BulkOutSize = TransferBufferLength;*/
		DBGPRINT(RT_DEBUG_TRACE, ("%s - Send NULL Frame @%d Mbps...\n", __FUNCTION__, RateIdToMbps[pAd->CommonCfg.TxRate]));
		RTUSB_SET_BULK_FLAG(pAd, fRTUSB_BULK_OUT_DATA_NULL);

		pAd->Sequence = (pAd->Sequence+1) & MAXSEQ;
		
		/* Kick bulk out */
		RTUSBKickBulkOut(pAd);
	}

}
开发者ID:557i，项目名称:mt7610u_wifi_sta_v3002_dpo_20130916，代码行数:49，代码来源:cmm_data_usb.c


示例14: RtmpUSBNullFrameKickOut

void RtmpUSBNullFrameKickOut(struct rt_rtmp_adapter *pAd,
			     u8 QueIdx,
			     u8 * pNullFrame, u32 frameLen)
{
	if (pAd->NullContext.InUse == FALSE) {
		struct rt_tx_context *pNullContext;
		struct rt_txinfo *pTxInfo;
		struct rt_txwi * pTxWI;
		u8 *pWirelessPkt;

		pNullContext = &(pAd->NullContext);

		/* Set the in use bit */
		pNullContext->InUse = TRUE;
		pWirelessPkt =
		    (u8 *)& pNullContext->TransferBuffer->field.
		    WirelessPacket[0];

		RTMPZeroMemory(&pWirelessPkt[0], 100);
		pTxInfo = (struct rt_txinfo *)& pWirelessPkt[0];
		RTMPWriteTxInfo(pAd, pTxInfo,
				(u16)(sizeof(struct rt_header_802_11) + TXWI_SIZE),
				TRUE, EpToQueue[MGMTPIPEIDX], FALSE, FALSE);
		pTxInfo->QSEL = FIFO_EDCA;
		pTxWI = (struct rt_txwi *) & pWirelessPkt[TXINFO_SIZE];
		RTMPWriteTxWI(pAd, pTxWI, FALSE, FALSE, FALSE, FALSE, TRUE,
			      FALSE, 0, BSSID_WCID, (sizeof(struct rt_header_802_11)), 0,
			      0, (u8)pAd->CommonCfg.MlmeTransmit.field.MCS,
			      IFS_HTTXOP, FALSE, &pAd->CommonCfg.MlmeTransmit);

		RTMPMoveMemory(&pWirelessPkt[TXWI_SIZE + TXINFO_SIZE],
			       &pAd->NullFrame, sizeof(struct rt_header_802_11));
		pAd->NullContext.BulkOutSize =
		    TXINFO_SIZE + TXWI_SIZE + sizeof(pAd->NullFrame) + 4;

		/* Fill out frame length information for global Bulk out arbitor */
		/*pNullContext->BulkOutSize = TransferBufferLength; */
		DBGPRINT(RT_DEBUG_TRACE,
			 ("SYNC - send NULL Frame @%d Mbps...\n",
			  RateIdToMbps[pAd->CommonCfg.TxRate]));
		RTUSB_SET_BULK_FLAG(pAd, fRTUSB_BULK_OUT_DATA_NULL);

		/* Kick bulk out */
		RTUSBKickBulkOut(pAd);
	}

}
开发者ID:AbheekG，项目名称:XIA-for-Linux，代码行数:47，代码来源:cmm_data_usb.c


示例15: RtmpUSBNullFrameKickOut

VOID RtmpUSBNullFrameKickOut(
	IN RTMP_ADAPTER *pAd,
	IN UCHAR		QueIdx,
	IN UCHAR		*pNullFrame,
	IN UINT32		frameLen)
{
	if (pAd->NullContext.InUse == FALSE)
	{
		PTX_CONTEXT		pNullContext;
		PTXINFO_STRUC	pTxInfo;
		PTXWI_STRUC		pTxWI;
		PUCHAR			pWirelessPkt;

		pNullContext = &(pAd->NullContext);

		// Set the in use bit
		pNullContext->InUse = TRUE;
		pWirelessPkt = (PUCHAR)&pNullContext->TransferBuffer->field.WirelessPacket[0];

		RTMPZeroMemory(&pWirelessPkt[0], 100);
		pTxInfo = (PTXINFO_STRUC)&pWirelessPkt[0];
		RTMPWriteTxInfo(pAd, pTxInfo, (USHORT)(sizeof(HEADER_802_11)+TXWI_SIZE), TRUE, EpToQueue[MGMTPIPEIDX], FALSE,  FALSE);
		pTxInfo->QSEL = FIFO_EDCA;
		pTxWI = (PTXWI_STRUC)&pWirelessPkt[TXINFO_SIZE];
		RTMPWriteTxWI(pAd, pTxWI,  FALSE, FALSE, FALSE, FALSE, TRUE, FALSE, 0, BSSID_WCID, (sizeof(HEADER_802_11)),
			0, 0, (UCHAR)pAd->CommonCfg.MlmeTransmit.field.MCS, IFS_HTTXOP, FALSE, &pAd->CommonCfg.MlmeTransmit);
#ifdef RT_BIG_ENDIAN
		RTMPWIEndianChange((PUCHAR)pTxWI, TYPE_TXWI);
#endif // RT_BIG_ENDIAN //

		RTMPMoveMemory(&pWirelessPkt[TXWI_SIZE+TXINFO_SIZE], &pAd->NullFrame, sizeof(HEADER_802_11));
#ifdef RT_BIG_ENDIAN
		RTMPFrameEndianChange(pAd, (PUCHAR)&pWirelessPkt[TXINFO_SIZE + TXWI_SIZE], DIR_WRITE, FALSE);
#endif // RT_BIG_ENDIAN //
		pAd->NullContext.BulkOutSize =  TXINFO_SIZE + TXWI_SIZE + sizeof(pAd->NullFrame) + 4;

		// Fill out frame length information for global Bulk out arbitor
		//pNullContext->BulkOutSize = TransferBufferLength;
		DBGPRINT(RT_DEBUG_TRACE, ("SYNC - send NULL Frame @%d Mbps...\n", RateIdToMbps[pAd->CommonCfg.TxRate]));
		RTUSB_SET_BULK_FLAG(pAd, fRTUSB_BULK_OUT_DATA_NULL);

		// Kick bulk out
		RTUSBKickBulkOut(pAd);
	}

}
开发者ID:458941968，项目名称:mini2440-kernel-2.6.29，代码行数:46，代码来源:cmm_data_2870.c


示例16: P2pCrednTabClean

VOID P2pCrednTabClean(
	IN PRTMP_ADAPTER pAd) 
{

	UCHAR		i;
	RT_GO_CREDENTIAL_ENTRY	*pCrednEntry;
	
	DBGPRINT(RT_DEBUG_TRACE,("P2pCrednTabClean .  \n"));

	for (i = 0; i < 2/*MAX_P2P_SAVECREDN_SIZE*/; i++)
	{		
		pCrednEntry = &pAd->P2pTable.TempCredential[i];
		RTMPZeroMemory(pCrednEntry, sizeof(RT_GO_CREDENTIAL_ENTRY));
		pCrednEntry->bValid = FALSE;
	}
	return;
}
开发者ID:Brainiarc7，项目名称:ralink_sdk，代码行数:17，代码来源:p2p_table.c


示例17: P2pPerstTabClean

VOID P2pPerstTabClean(
	IN PRTMP_ADAPTER pAd) 
{
	PRT_P2P_PERSISTENT_ENTRY		pP2pPerstEntry;
	UCHAR		i;
	
	DBGPRINT(RT_DEBUG_TRACE,("P2pPerstTabClean .  \n"));

	for (i = 0; i < MAX_P2P_TABLE_SIZE; i++)
	{		
		pP2pPerstEntry = &pAd->P2pTable.PerstEntry[i];
		RTMPZeroMemory(pP2pPerstEntry, sizeof(RT_P2P_PERSISTENT_ENTRY));
		pP2pPerstEntry->bValid = FALSE;
	}
	pAd->P2pTable.PerstNumber = 0;
	return;

}
开发者ID:Brainiarc7，项目名称:ralink_sdk，代码行数:18，代码来源:p2p_table.c


示例18: WscGetXmlSSID

BOOLEAN WscGetXmlSSID(
	IN	STRING				*pXmlData,
	OUT	NDIS_802_11_SSID	*pSsid)
{
	STRING	*ptr, *pBuffer = pXmlData;

	ptr = rtstrstr(pBuffer, (PSTRING)XML_SSID_START);
	if (ptr == NULL)
	{
		DBGPRINT(RT_DEBUG_TRACE, ("WscGetXmlSSID: missing <ssid\n"));
		return FALSE;
	}

	pBuffer = ptr + strlen(XML_SSID_START);
	
	ptr = rtstrstr(pBuffer, ">");
	if (ptr)
	{
		pBuffer = ptr + 1;
	}

	ptr = rtstrstr(pBuffer, (PSTRING)XML_SSID_END);
	if (ptr == NULL)
	{
		DBGPRINT(RT_DEBUG_TRACE, ("WscGetXmlSSID: missing </ssid>\n"));
		return FALSE;
	}

	pSsid->SsidLength = (UINT)(ptr - pBuffer);
	RTMPZeroMemory(pSsid->Ssid, NDIS_802_11_LENGTH_SSID);
	if ((pSsid->SsidLength > 0) && (pSsid->SsidLength < 33))
	{
		RTMPMoveMemory(pSsid->Ssid, pBuffer, pSsid->SsidLength);
	}
	else
	{
		pSsid->SsidLength = 0;
		return FALSE;
	}

	return TRUE;
}
开发者ID:aircross，项目名称:ray，代码行数:42，代码来源:wsc_ufd.c


示例19: FT_OTD_ActParmFill

VOID FT_OTD_ActParmFill(
    IN PRTMP_ADAPTER pAd,
    IN OUT MLME_FT_REQ_STRUCT *FtReq,
    IN PUCHAR pAddr,
    IN NDIS_802_11_AUTHENTICATION_MODE AuthMode,
    IN PFT_MDIE_INFO FtMdieInfo,
    IN PFT_FTIE_INFO FtFtieInfo,
    IN UCHAR VarIeLen,
    IN PUCHAR pVarIe)
{
    RTMPZeroMemory(FtReq, sizeof (MLME_FT_REQ_STRUCT));
    COPY_MAC_ADDR(FtReq->TargetAddr, pAddr);
    if (AuthMode >= Ndis802_11AuthModeWPA)
        FtReq->HaveRSN = 1;
    FtReq->Timeout = FT_ACT_TIMEOUT;
    FT_SET_MDID(FtReq->MdIe.MdId, FtMdieInfo->MdId);
    FtReq->MdIe.FtCapPlc.word = FtMdieInfo->FtCapPlc.word;
    RTMPMoveMemory(&FtReq->SNonce[0], FtFtieInfo->SNonce, 32);
    RTMPMoveMemory(&FtReq->R0khId[0], FtFtieInfo->R0khId,
                   FtFtieInfo->R0khIdLen);
    FtReq->R0khIdLen = FtFtieInfo->R0khIdLen;
    RTMPMoveMemory(&FtReq->VIe[0], pVarIe, VarIeLen);
}
开发者ID:vm3vuy，项目名称:my-local-repository，代码行数:23，代码来源:ft_action.c


示例20: RTMPSetHT

/*
	========================================================================
	Routine Description:
		Caller ensures we has 802.11n support.
		Calls at setting HT from AP/STASetinformation

	Arguments:
		pAd - Pointer to our adapter
		phymode  - 

	========================================================================
*/
VOID RTMPSetHT(
	IN RTMP_ADAPTER *pAd,
	IN OID_SET_HT_PHYMODE *pHTPhyMode)
{
	UCHAR RxStream = pAd->CommonCfg.RxStream;
#ifdef CONFIG_AP_SUPPORT
	INT apidx;
#endif /* CONFIG_AP_SUPPORT */
#ifdef CONFIG_MULTI_CHANNEL
#if defined(RT_CFG80211_SUPPORT) && defined(CONFIG_AP_SUPPORT)
	BSS_STRUCT *pMbss = &pAd->ApCfg.MBSSID[CFG_GO_BSSID_IDX];
	struct wifi_dev *wdev = &pMbss->wdev;
#endif /* defined(RT_CFG80211_SUPPORT) && defined(CONFIG_AP_SUPPORT) */
#endif /* CONFIG_MULTI_CHANNEL */

	INT bw;
	RT_HT_CAPABILITY *rt_ht_cap = &pAd->CommonCfg.DesiredHtPhy;
	HT_CAPABILITY_IE *ht_cap= &pAd->CommonCfg.HtCapability;
	
#ifdef CONFIG_AP_SUPPORT
	/* sanity check for extention channel */
	if (CHAN_PropertyCheck(pAd, pAd->CommonCfg.Channel,
						CHANNEL_NO_FAT_BELOW | CHANNEL_NO_FAT_ABOVE) == TRUE)
	{
		/* only 20MHz is allowed */
		pHTPhyMode->BW = 0;
	}
	else if (pHTPhyMode->ExtOffset == EXTCHA_BELOW)
	{
		/* extension channel below this channel is not allowed */
		if (CHAN_PropertyCheck(pAd, pAd->CommonCfg.Channel,
						CHANNEL_NO_FAT_BELOW) == TRUE)
		{
			pHTPhyMode->ExtOffset = EXTCHA_ABOVE;
		}
	}
	else if (pHTPhyMode->ExtOffset == EXTCHA_ABOVE)
	{
		/* extension channel above this channel is not allowed */
		if (CHAN_PropertyCheck(pAd, pAd->CommonCfg.Channel,
						CHANNEL_NO_FAT_ABOVE) == TRUE)
		{
			pHTPhyMode->ExtOffset = EXTCHA_BELOW;
		}
	}
#endif /* CONFIG_AP_SUPPORT */

	MTWF_LOG(DBG_CAT_ALL, DBG_SUBCAT_ALL, DBG_LVL_TRACE, ("RTMPSetHT : HT_mode(%d), ExtOffset(%d), MCS(%d), BW(%d), STBC(%d), SHORTGI(%d)\n",
										pHTPhyMode->HtMode, pHTPhyMode->ExtOffset, 
										pHTPhyMode->MCS, pHTPhyMode->BW,
										pHTPhyMode->STBC, pHTPhyMode->SHORTGI));
			
	/* Don't zero supportedHyPhy structure.*/
	RTMPZeroMemory(ht_cap, sizeof(HT_CAPABILITY_IE));
	RTMPZeroMemory(&pAd->CommonCfg.AddHTInfo, sizeof(pAd->CommonCfg.AddHTInfo));
	RTMPZeroMemory(&pAd->CommonCfg.NewExtChanOffset, sizeof(pAd->CommonCfg.NewExtChanOffset));
	RTMPZeroMemory(rt_ht_cap, sizeof(RT_HT_CAPABILITY));

   	if (pAd->CommonCfg.bRdg)
	{
		ht_cap->ExtHtCapInfo.PlusHTC = 1;
		ht_cap->ExtHtCapInfo.RDGSupport = 1;
	}
	else
	{
		ht_cap->ExtHtCapInfo.PlusHTC = 0;
		ht_cap->ExtHtCapInfo.RDGSupport = 0;
	}

	ht_cap->HtCapParm.MaxRAmpduFactor = pAd->chipCap.AMPDUFactor;
	rt_ht_cap->MaxRAmpduFactor = pAd->chipCap.AMPDUFactor;

	MTWF_LOG(DBG_CAT_ALL, DBG_SUBCAT_ALL, DBG_LVL_TRACE, ("RTMPSetHT : RxBAWinLimit = %d\n", pAd->CommonCfg.BACapability.field.RxBAWinLimit));

	/* Mimo power save, A-MSDU size, */
	rt_ht_cap->AmsduEnable = (USHORT)pAd->CommonCfg.BACapability.field.AmsduEnable;
	rt_ht_cap->AmsduSize = (UCHAR)pAd->CommonCfg.BACapability.field.AmsduSize;
	rt_ht_cap->MimoPs = (UCHAR)pAd->CommonCfg.BACapability.field.MMPSmode;
	rt_ht_cap->MpduDensity = (UCHAR)pAd->CommonCfg.BACapability.field.MpduDensity;

	ht_cap->HtCapInfo.AMsduSize = (USHORT)pAd->CommonCfg.BACapability.field.AmsduSize;
	ht_cap->HtCapInfo.MimoPs = (USHORT)pAd->CommonCfg.BACapability.field.MMPSmode;
	
	if (pAd->CommonCfg.ht_ldpc && (pAd->chipCap.phy_caps & fPHY_CAP_LDPC))
		ht_cap->HtCapInfo.ht_rx_ldpc = 1;
	else
		ht_cap->HtCapInfo.ht_rx_ldpc = 0;
	
//.........这里部分代码省略.........
开发者ID:AnyoeDove，项目名称:mtk-sources，代码行数:101，代码来源:mgmt_ht.c



注：本文中的RTMPZeroMemory函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花
握手
雷人
路过
鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
More+
上一篇：
C++ RTMP_BBP_IO_READ8_BY_REG_ID函数代码示例发布时间：2022-05-30
下一篇：
C++ RTMPSendWirelessEvent函数代码示例发布时间：2022-05-30
热门推荐
More+
热门话题
More+
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服（服务时间 9:00～18:00）

在线QQ客服
地址：深圳市南山区西丽大学城创智工业园
电邮：jeky_zhao#qq.com
移动电话：139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap