C++ RREG32_SMC函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中RREG32_SMC函数的典型用法代码示例。如果您正苦于以下问题：C++ RREG32_SMC函数的具体用法？C++ RREG32_SMC怎么用？C++ RREG32_SMC使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了RREG32_SMC函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: vi_set_uvd_clock

static int vi_set_uvd_clock(struct amdgpu_device *adev, u32 clock,
			u32 cntl_reg, u32 status_reg)
{
	int r, i;
	struct atom_clock_dividers dividers;
	uint32_t tmp;

	r = amdgpu_atombios_get_clock_dividers(adev,
					       COMPUTE_GPUCLK_INPUT_FLAG_DEFAULT_GPUCLK,
					       clock, false, &dividers);
	if (r)
		return r;

	tmp = RREG32_SMC(cntl_reg);
	tmp &= ~(CG_DCLK_CNTL__DCLK_DIR_CNTL_EN_MASK |
		CG_DCLK_CNTL__DCLK_DIVIDER_MASK);
	tmp |= dividers.post_divider;
	WREG32_SMC(cntl_reg, tmp);

	for (i = 0; i < 100; i++) {
		if (RREG32_SMC(status_reg) & CG_DCLK_STATUS__DCLK_STATUS_MASK)
			break;
		mdelay(10);
	}
	if (i == 100)
		return -ETIMEDOUT;

	return 0;
}

开发者ID:BOB-TBS，项目名称:linux_media，代码行数:29，代码来源:vi.c

示例2: uvd_v6_0_get_clockgating_state

static void uvd_v6_0_get_clockgating_state(void *handle, u32 *flags)
{
	struct amdgpu_device *adev = (struct amdgpu_device *)handle;
	int data;

	mutex_lock(&adev->pm.mutex);

	if (adev->flags & AMD_IS_APU)
		data = RREG32_SMC(ixCURRENT_PG_STATUS_APU);
	else
		data = RREG32_SMC(ixCURRENT_PG_STATUS);

	if (data & CURRENT_PG_STATUS__UVD_PG_STATUS_MASK) {
		DRM_INFO("Cannot get clockgating state when UVD is powergated.\n");
		goto out;
	}

	/* AMD_CG_SUPPORT_UVD_MGCG */
	data = RREG32(mmUVD_CGC_CTRL);
	if (data & UVD_CGC_CTRL__DYN_CLOCK_MODE_MASK)
		*flags |= AMD_CG_SUPPORT_UVD_MGCG;

out:
	mutex_unlock(&adev->pm.mutex);
}

开发者ID:Anjali05，项目名称:linux，代码行数:25，代码来源:uvd_v6_0.c

示例3: amdgpu_si_is_smc_running

bool amdgpu_si_is_smc_running(struct amdgpu_device *adev)
{
	u32 rst = RREG32_SMC(SMC_SYSCON_RESET_CNTL);
	u32 clk = RREG32_SMC(SMC_SYSCON_CLOCK_CNTL_0);

	if (!(rst & RST_REG) && !(clk & CK_DISABLE))
		return true;

	return false;
}

开发者ID:AlexShiLucky，项目名称:linux，代码行数:10，代码来源:si_smc.c

示例4: ci_is_smc_running

bool ci_is_smc_running(struct radeon_device *rdev)
{
	u32 clk = RREG32_SMC(SMC_SYSCON_CLOCK_CNTL_0);
	u32 pc_c = RREG32_SMC(SMC_PC_C);

	if (!(clk & CK_DISABLE) && (0x20100 <= pc_c))
		return true;

	return false;
}

开发者ID:03199618，项目名称:linux，代码行数:10，代码来源:ci_smc.c

示例5: vi_get_rev_id

static uint32_t vi_get_rev_id(struct amdgpu_device *adev)
{
	if (adev->flags & AMD_IS_APU)
		return (RREG32_SMC(ATI_REV_ID_FUSE_MACRO__ADDRESS) & ATI_REV_ID_FUSE_MACRO__MASK)
			>> ATI_REV_ID_FUSE_MACRO__SHIFT;
	else
		return (RREG32(mmPCIE_EFUSE4) & PCIE_EFUSE4__STRAP_BIF_ATI_REV_ID_MASK)

开发者ID:BOB-TBS，项目名称:linux_media，代码行数:7，代码来源:vi.c

示例6: ci_reset_smc

void ci_reset_smc(struct radeon_device *rdev)
{
	u32 tmp = RREG32_SMC(SMC_SYSCON_RESET_CNTL);

	tmp |= RST_REG;
	WREG32_SMC(SMC_SYSCON_RESET_CNTL, tmp);
}

开发者ID:03199618，项目名称:linux，代码行数:7，代码来源:ci_smc.c

示例7: si_start_smc_clock

void si_start_smc_clock(struct radeon_device *rdev)
{
	u32 tmp = RREG32_SMC(SMC_SYSCON_CLOCK_CNTL_0);

	tmp &= ~CK_DISABLE;

	WREG32_SMC(SMC_SYSCON_CLOCK_CNTL_0, tmp);
}

开发者ID:iHaD，项目名称:DragonFlyBSD，代码行数:8，代码来源:si_smc.c

示例8: si_start_smc

void si_start_smc(struct radeon_device *rdev)
{
	u32 tmp = RREG32_SMC(SMC_SYSCON_RESET_CNTL);

	tmp &= ~RST_REG;

	WREG32_SMC(SMC_SYSCON_RESET_CNTL, tmp);
}

开发者ID:iHaD，项目名称:DragonFlyBSD，代码行数:8，代码来源:si_smc.c

示例9: amdgpu_si_start_smc

void amdgpu_si_start_smc(struct amdgpu_device *adev)
{
	u32 tmp = RREG32_SMC(SMC_SYSCON_RESET_CNTL);

	tmp &= ~RST_REG;

	WREG32_SMC(SMC_SYSCON_RESET_CNTL, tmp);
}

开发者ID:AlexShiLucky，项目名称:linux，代码行数:8，代码来源:si_smc.c

示例10: vi_get_xclk

/**
 * vi_get_xclk - get the xclk
 *
 * @adev: amdgpu_device pointer
 *
 * Returns the reference clock used by the gfx engine
 * (VI).
 */
static u32 vi_get_xclk(struct amdgpu_device *adev)
{
	u32 reference_clock = adev->clock.spll.reference_freq;
	u32 tmp;

	if (adev->flags & AMD_IS_APU)
		return reference_clock;

	tmp = RREG32_SMC(ixCG_CLKPIN_CNTL_2);
	if (REG_GET_FIELD(tmp, CG_CLKPIN_CNTL_2, MUX_TCLK_TO_XCLK))
		return 1000;

	tmp = RREG32_SMC(ixCG_CLKPIN_CNTL);
	if (REG_GET_FIELD(tmp, CG_CLKPIN_CNTL, XTALIN_DIVIDE))
		return reference_clock / 4;

	return reference_clock;
}

开发者ID:BOB-TBS，项目名称:linux_media，代码行数:26，代码来源:vi.c

示例11: amdgpu_kv_dpm_get_enable_mask

int amdgpu_kv_dpm_get_enable_mask(struct amdgpu_device *adev, u32 *enable_mask)
{
	int ret;

	ret = amdgpu_kv_notify_message_to_smu(adev, PPSMC_MSG_SCLKDPM_GetEnabledMask);

	if (ret == 0)
		*enable_mask = RREG32_SMC(ixSMC_SYSCON_MSG_ARG_0);

	return ret;
}

开发者ID:020gzh，项目名称:linux，代码行数:11，代码来源:kv_smc.c

示例12: amdgpu_si_smc_clock

void amdgpu_si_smc_clock(struct amdgpu_device *adev, bool enable)
{
	u32 tmp = RREG32_SMC(SMC_SYSCON_CLOCK_CNTL_0);

	if (enable)
		tmp &= ~CK_DISABLE;
	else
		tmp |= CK_DISABLE;

	WREG32_SMC(SMC_SYSCON_CLOCK_CNTL_0, tmp);
}

开发者ID:AlexShiLucky，项目名称:linux，代码行数:11，代码来源:si_smc.c

示例13: vce_v2_0_set_bypass_mode

static void vce_v2_0_set_bypass_mode(struct amdgpu_device *adev, bool enable)
{
	u32 tmp = RREG32_SMC(ixGCK_DFS_BYPASS_CNTL);

	if (enable)
		tmp |= GCK_DFS_BYPASS_CNTL__BYPASSECLK_MASK;
	else
		tmp &= ~GCK_DFS_BYPASS_CNTL__BYPASSECLK_MASK;

	WREG32_SMC(ixGCK_DFS_BYPASS_CNTL, tmp);
}

开发者ID:forgivemyheart，项目名称:linux，代码行数:11，代码来源:vce_v2_0.c

示例14: kv_dpm_get_enable_mask

int kv_dpm_get_enable_mask(struct radeon_device *rdev, u32 *enable_mask)
{
	int ret;

	ret = kv_notify_message_to_smu(rdev, PPSMC_MSG_SCLKDPM_GetEnabledMask);

	if (ret == 0)
		*enable_mask = RREG32_SMC(SMC_SYSCON_MSG_ARG_0);

	return ret;
}

开发者ID:020gzh，项目名称:linux，代码行数:11，代码来源:kv_smc.c

示例15: uvd_v6_set_bypass_mode

static void uvd_v6_set_bypass_mode(struct amdgpu_device *adev, bool enable)
{
	u32 tmp = RREG32_SMC(ixGCK_DFS_BYPASS_CNTL);

	if (enable)
		tmp |= (GCK_DFS_BYPASS_CNTL__BYPASSDCLK_MASK |
			GCK_DFS_BYPASS_CNTL__BYPASSVCLK_MASK);
	else
		tmp &= ~(GCK_DFS_BYPASS_CNTL__BYPASSDCLK_MASK |
			 GCK_DFS_BYPASS_CNTL__BYPASSVCLK_MASK);

	WREG32_SMC(ixGCK_DFS_BYPASS_CNTL, tmp);
}

开发者ID:acton393，项目名称:linux，代码行数:13，代码来源:uvd_v6_0.c

示例16: si_reset_smc

void si_reset_smc(struct radeon_device *rdev)
{
	u32 tmp;

	RREG32(CB_CGTT_SCLK_CTRL);
	RREG32(CB_CGTT_SCLK_CTRL);
	RREG32(CB_CGTT_SCLK_CTRL);
	RREG32(CB_CGTT_SCLK_CTRL);

	tmp = RREG32_SMC(SMC_SYSCON_RESET_CNTL);
	tmp |= RST_REG;
	WREG32_SMC(SMC_SYSCON_RESET_CNTL, tmp);
}

开发者ID:iHaD，项目名称:DragonFlyBSD，代码行数:13，代码来源:si_smc.c

示例17: amdgpu_si_reset_smc

void amdgpu_si_reset_smc(struct amdgpu_device *adev)
{
	u32 tmp;

	RREG32(CB_CGTT_SCLK_CTRL);
	RREG32(CB_CGTT_SCLK_CTRL);
	RREG32(CB_CGTT_SCLK_CTRL);
	RREG32(CB_CGTT_SCLK_CTRL);

	tmp = RREG32_SMC(SMC_SYSCON_RESET_CNTL) |
	      RST_REG;
	WREG32_SMC(SMC_SYSCON_RESET_CNTL, tmp);
}

开发者ID:AlexShiLucky，项目名称:linux，代码行数:13，代码来源:si_smc.c

示例18: vi_set_vce_clocks

static int vi_set_vce_clocks(struct amdgpu_device *adev, u32 evclk, u32 ecclk)
{
	int r, i;
	struct atom_clock_dividers dividers;
	u32 tmp;

	r = amdgpu_atombios_get_clock_dividers(adev,
					       COMPUTE_GPUCLK_INPUT_FLAG_DEFAULT_GPUCLK,
					       ecclk, false, &dividers);
	if (r)
		return r;

	for (i = 0; i < 100; i++) {
		if (RREG32_SMC(ixCG_ECLK_STATUS) & CG_ECLK_STATUS__ECLK_STATUS_MASK)
			break;
		mdelay(10);
	}
	if (i == 100)
		return -ETIMEDOUT;

	tmp = RREG32_SMC(ixCG_ECLK_CNTL);
	tmp &= ~(CG_ECLK_CNTL__ECLK_DIR_CNTL_EN_MASK |
		CG_ECLK_CNTL__ECLK_DIVIDER_MASK);
	tmp |= dividers.post_divider;
	WREG32_SMC(ixCG_ECLK_CNTL, tmp);

	for (i = 0; i < 100; i++) {
		if (RREG32_SMC(ixCG_ECLK_STATUS) & CG_ECLK_STATUS__ECLK_STATUS_MASK)
			break;
		mdelay(10);
	}
	if (i == 100)
		return -ETIMEDOUT;

	return 0;
}

开发者ID:lcavalcante，项目名称:linux，代码行数:36，代码来源:vi.c

示例19: amdgpu_si_wait_for_smc_inactive

PPSMC_Result amdgpu_si_wait_for_smc_inactive(struct amdgpu_device *adev)
{
	u32 tmp;
	int i;

	if (!amdgpu_si_is_smc_running(adev))
		return PPSMC_Result_OK;

	for (i = 0; i < adev->usec_timeout; i++) {
		tmp = RREG32_SMC(SMC_SYSCON_CLOCK_CNTL_0);
		if ((tmp & CKEN) == 0)
			break;
		udelay(1);
	}

	return PPSMC_Result_OK;
}

开发者ID:AlexShiLucky，项目名称:linux，代码行数:17，代码来源:si_smc.c

示例20: vi_read_disabled_bios

static bool vi_read_disabled_bios(struct amdgpu_device *adev)
{
	u32 bus_cntl;
	u32 d1vga_control = 0;
	u32 d2vga_control = 0;
	u32 vga_render_control = 0;
	u32 rom_cntl;
	bool r;

	bus_cntl = RREG32(mmBUS_CNTL);
	if (adev->mode_info.num_crtc) {
		d1vga_control = RREG32(mmD1VGA_CONTROL);
		d2vga_control = RREG32(mmD2VGA_CONTROL);
		vga_render_control = RREG32(mmVGA_RENDER_CONTROL);
	}
	rom_cntl = RREG32_SMC(ixROM_CNTL);

	/* enable the rom */
	WREG32(mmBUS_CNTL, (bus_cntl & ~BUS_CNTL__BIOS_ROM_DIS_MASK));
	if (adev->mode_info.num_crtc) {
		/* Disable VGA mode */
		WREG32(mmD1VGA_CONTROL,
		       (d1vga_control & ~(D1VGA_CONTROL__D1VGA_MODE_ENABLE_MASK |
					  D1VGA_CONTROL__D1VGA_TIMING_SELECT_MASK)));
		WREG32(mmD2VGA_CONTROL,
		       (d2vga_control & ~(D2VGA_CONTROL__D2VGA_MODE_ENABLE_MASK |
					  D2VGA_CONTROL__D2VGA_TIMING_SELECT_MASK)));
		WREG32(mmVGA_RENDER_CONTROL,
		       (vga_render_control & ~VGA_RENDER_CONTROL__VGA_VSTATUS_CNTL_MASK));
	}
	WREG32_SMC(ixROM_CNTL, rom_cntl | ROM_CNTL__SCK_OVERWRITE_MASK);

	r = amdgpu_read_bios(adev);

	/* restore regs */
	WREG32(mmBUS_CNTL, bus_cntl);
	if (adev->mode_info.num_crtc) {
		WREG32(mmD1VGA_CONTROL, d1vga_control);
		WREG32(mmD2VGA_CONTROL, d2vga_control);
		WREG32(mmVGA_RENDER_CONTROL, vga_render_control);
	}
	WREG32_SMC(ixROM_CNTL, rom_cntl);
	return r;
}

开发者ID:BOB-TBS，项目名称:linux_media，代码行数:44，代码来源:vi.c

注：本文中的RREG32_SMC函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。