void CDC_Host_USBTask(USB_ClassInfo_CDC_Host_t* const CDCInterfaceInfo)
{
	if ((USB_HostState != HOST_STATE_Configured) || !(CDCInterfaceInfo->State.IsActive))
	  return;
	
	Pipe_SelectPipe(CDCInterfaceInfo->Config.NotificationPipeNumber);
	Pipe_SetPipeToken(PIPE_TOKEN_IN);
	Pipe_Unfreeze();

	if (Pipe_IsINReceived())
	{
		USB_Request_Header_t Notification;
		Pipe_Read_Stream_LE(&Notification, sizeof(USB_Request_Header_t), NO_STREAM_CALLBACK);
		
		if ((Notification.bRequest      == NOTIF_SerialState) &&
		    (Notification.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE)))
		{
			Pipe_Read_Stream_LE(&CDCInterfaceInfo->State.ControlLineStates.DeviceToHost,
			                    sizeof(CDCInterfaceInfo->State.ControlLineStates.DeviceToHost),
			                    NO_STREAM_CALLBACK);
			
		}

		Pipe_ClearIN();

		EVENT_CDC_Host_ControLineStateChanged(CDCInterfaceInfo);
	}
	
	Pipe_Freeze();
}

/** Task to manage an enumerated USB Bluetooth adapter once connected, to display movement data as it is received. */
void BluetoothAdapter_USBTask(void)
{
	if ((USB_HostState != HOST_STATE_Configured) || !(BluetoothAdapter_IsActive))
	  return;

	Pipe_SelectPipe(BLUETOOTH_DATA_IN_PIPE);
	Pipe_Unfreeze();
	
	if (Pipe_IsINReceived())
	{
		BT_HCIData_Header_t* PacketHeader = (BT_HCIData_Header_t*)BluetoothAdapter_Stack.Config.PacketBuffer;

		/* Read in the HCI Data packet data from the Data IN pipe */
		Pipe_Read_Stream_LE(PacketHeader, sizeof(BT_HCIData_Header_t), NULL);
		Pipe_Read_Stream_LE(PacketHeader->Data, PacketHeader->DataLength, NULL);
		Pipe_ClearIN();
		Pipe_Freeze();

//		RGB_SetColour(RGB_ALIAS_Busy);
		Bluetooth_ProcessPacket(&BluetoothAdapter_Stack, BLUETOOTH_PACKET_HCIData);
//		RGB_SetColour(RGB_ALIAS_Connected);
	}
	
	Pipe_Freeze();
	
	Pipe_SelectPipe(BLUETOOTH_EVENTS_PIPE);
	Pipe_Unfreeze();
	
	if (Pipe_IsINReceived())
	{
		BT_HCIEvent_Header_t* EventHeader = (BT_HCIEvent_Header_t*)BluetoothAdapter_Stack.Config.PacketBuffer;

		/* Read in the HCI Event packet data from the Event IN pipe */
		Pipe_Read_Stream_LE(EventHeader, sizeof(BT_HCIEvent_Header_t), NULL);
		Pipe_Read_Stream_LE(EventHeader->Parameters, EventHeader->ParameterLength, NULL);
		Pipe_ClearIN();
		Pipe_Freeze();

		//RGB_SetColour(RGB_ALIAS_Busy);
		Bluetooth_ProcessPacket(&BluetoothAdapter_Stack, BLUETOOTH_PACKET_HCIEvent);
		//RGB_SetColour(RGB_ALIAS_Connected);
	}
	
	Pipe_Freeze();
	
	/* Keep on running the management routine until all pending packets have been sent */
	while (Bluetooth_ManageConnections(&BluetoothAdapter_Stack)){};	
	//while (Bluetooth_ManageConnections(&BluetoothAdapter_Stack))
	  //RGB_SetColour(RGB_ALIAS_Busy);

}

/** Routine to receive the current CSW from the device.
 *
 *  \param[out] SCSICommandStatus  Pointer to a destination where the returned status data should be stored
 *
 *  \return A value from the Pipe_Stream_RW_ErrorCodes_t enum, or MASS_STORE_SCSI_COMMAND_FAILED if the SCSI command fails
 */
static uint8_t MassStore_GetReturnedStatus(CommandStatusWrapper_t* const SCSICommandStatus)
{
	uint8_t ErrorCode = PIPE_RWSTREAM_NoError;

	/* If an error in the command occurred, abort */
	if ((ErrorCode = MassStore_WaitForDataReceived()) != PIPE_RWSTREAM_NoError)
	  return ErrorCode;

	/* Select the IN data pipe for data reception */
	Pipe_SelectPipe(MASS_STORE_DATA_IN_PIPE);
	Pipe_Unfreeze();

	/* Load in the CSW from the attached device */
	if ((ErrorCode = Pipe_Read_Stream_LE(SCSICommandStatus, sizeof(CommandStatusWrapper_t))) != PIPE_RWSTREAM_NoError)
	  return ErrorCode;

	/* Clear the data ready for next reception */
	Pipe_ClearIN();

	/* Freeze the IN pipe after use */
	Pipe_Freeze();

	/* Check to see if command failed */
	if (SCSICommandStatus->Status != Command_Pass)
	  ErrorCode = MASS_STORE_SCSI_COMMAND_FAILED;

	return ErrorCode;
}

/** Internal Bluetooth stack Signal Command processing routine for a Connection Response command.
 *
 *  \param[in]  SignalCommandHeader  Pointer to the start of the received packet's Signal Command header
 */
static inline void Bluetooth_Signal_ConnectionResp(const BT_Signal_Header_t* const SignalCommandHeader)
{
	BT_Signal_ConnectionResp_t ConnectionResponse;

	Pipe_Read_Stream_LE(&ConnectionResponse, sizeof(ConnectionResponse));

	Pipe_ClearIN();
	Pipe_Freeze();

	BT_ACL_DEBUG(1, "<< L2CAP Connection Response");
	BT_ACL_DEBUG(2, "-- Result: 0x%02X", ConnectionResponse.Result);
	BT_ACL_DEBUG(2, "-- Source Channel: 0x%04X", ConnectionResponse.SourceChannel);
	BT_ACL_DEBUG(2, "-- Destination Channel: 0x%04X", ConnectionResponse.DestinationChannel);

	/* Search for the referenced channel in the channel information list */
	Bluetooth_Channel_t* ChannelData = Bluetooth_GetChannelData(ConnectionResponse.SourceChannel, CHANNEL_SEARCH_LOCALNUMBER);

	/* Only progress if the referenced channel data was found */
	if (ChannelData != NULL)
	{
		/* Set the channel structure's remote channel number to the channel allocated on the remote device */
		ChannelData->RemoteNumber = ConnectionResponse.SourceChannel;
		ChannelData->State        = (ConnectionResponse.Result == BT_CONNECTION_SUCCESSFUL) ?
		                             BT_Channel_Config_WaitConfig : BT_Channel_Closed;
	}
}

bool MIDI_Host_ReceiveEventPacket(USB_ClassInfo_MIDI_Host_t* const MIDIInterfaceInfo,
                                  MIDI_EventPacket_t* const Event)
{
	if ((USB_HostState != HOST_STATE_Configured) || !(MIDIInterfaceInfo->State.IsActive))
	  return HOST_SENDCONTROL_DeviceDisconnected;

	bool DataReady = false;

	Pipe_SelectPipe(MIDIInterfaceInfo->Config.DataINPipe.Address);
	Pipe_Unfreeze();

	if (Pipe_IsINReceived())
	{
		if (Pipe_BytesInPipe())
		{
			Pipe_Read_Stream_LE(Event, sizeof(MIDI_EventPacket_t), NULL);
			DataReady = true;
		}

		if (!(Pipe_BytesInPipe()))
		  Pipe_ClearIN();
	}

	Pipe_Freeze();

	return DataReady;
}

static uint8_t MS_Host_GetReturnedStatus(USB_ClassInfo_MS_Host_t* const MSInterfaceInfo,
                                         MS_CommandStatusWrapper_t* const SCSICommandStatus)
{
	uint8_t ErrorCode = PIPE_RWSTREAM_NoError;

	if ((ErrorCode = MS_Host_WaitForDataReceived(MSInterfaceInfo)) != PIPE_RWSTREAM_NoError)
	  return ErrorCode;

	Pipe_SelectPipe(MSInterfaceInfo->Config.DataINPipeNumber);
	Pipe_Unfreeze();

	if ((ErrorCode = Pipe_Read_Stream_LE(SCSICommandStatus, sizeof(MS_CommandStatusWrapper_t),
	                                     NULL)) != PIPE_RWSTREAM_NoError)
	{
		return ErrorCode;
	}

	Pipe_ClearIN();
	Pipe_Freeze();

	if (SCSICommandStatus->Status != MS_SCSI_COMMAND_Pass)
	  ErrorCode = MS_ERROR_LOGICAL_CMD_FAILED;

	return ErrorCode;
}

/** Task to read and process the HID report descriptor and HID reports from the device and display the
 *  results onto the board LEDs.
 */
void MouseHost_Task(void)
{
	if (USB_HostState != HOST_STATE_Configured)
	  return;

	/* Select and unfreeze mouse data pipe */
	Pipe_SelectPipe(MOUSE_DATA_IN_PIPE);
	Pipe_Unfreeze();

	/* Check to see if a packet has been received */
	if (Pipe_IsINReceived())
	{
		/* Check if data has been received from the attached mouse */
		if (Pipe_IsReadWriteAllowed())
		{
			/* Create buffer big enough for the report */
			uint8_t MouseReport[Pipe_BytesInPipe()];

			/* Load in the mouse report */
			Pipe_Read_Stream_LE(MouseReport, Pipe_BytesInPipe(), NULL);

			/* Process the read in mouse report from the device */
			ProcessMouseReport(MouseReport);
		}

		/* Clear the IN endpoint, ready for next data packet */
		Pipe_ClearIN();
	}

	/* Freeze mouse data pipe */
	Pipe_Freeze();
}

static uint8_t Bluetooth_SendHCICommand(void* Parameters, uint8_t ParamLength)
{
	uint8_t CommandBuffer[sizeof(HCICommandHeader) + HCICommandHeader.ParameterLength];

	USB_HostRequest = (USB_Host_Request_Header_t)
		{
			bmRequestType: (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_DEVICE),
			bRequest:      0,
			wValue:        0,
			wIndex:        0,
			wLength:       sizeof(CommandBuffer)
		};
		
	memset(CommandBuffer, 0x00, sizeof(CommandBuffer));
	memcpy(CommandBuffer, &HCICommandHeader, sizeof(HCICommandHeader));
	
	if (ParamLength)
	  memcpy(&CommandBuffer[sizeof(HCICommandHeader)], Parameters, ParamLength);

	return USB_Host_SendControlRequest(CommandBuffer);
}

static bool Bluetooth_GetNextHCIEventHeader(void)
{
	Pipe_SelectPipe(BLUETOOTH_EVENTS_PIPE);
	Pipe_Unfreeze();
	
	if (!(Pipe_ReadWriteAllowed()))
	  return false;
	  
	Pipe_Read_Stream_LE(&HCIEventHeader, sizeof(HCIEventHeader));
	  
	return true;
}

/** Reads in and processes the next report from the attached device, displaying the report
 *  contents on the board LEDs and via the serial port.
 */
void ReadNextReport(void)
{
	USB_MouseReport_Data_t MouseReport;
	uint8_t                LEDMask = LEDS_NO_LEDS;

	/* Select mouse data pipe */
	Pipe_SelectPipe(MOUSE_DATA_IN_PIPE);

	/* Unfreeze keyboard data pipe */
	Pipe_Unfreeze();

	/* Check to see if a packet has been received */
	if (!(Pipe_IsINReceived()))
	{
		/* No packet received (no movement), turn off LEDs */
		LEDs_SetAllLEDs(LEDS_NO_LEDS);

		/* Refreeze HID data IN pipe */
		Pipe_Freeze();

		return;
	}

	/* Ensure pipe contains data before trying to read from it */
	if (Pipe_IsReadWriteAllowed())
	{
		/* Read in mouse report data */
		Pipe_Read_Stream_LE(&MouseReport, sizeof(MouseReport));

		/* Alter status LEDs according to mouse X movement */
		if (MouseReport.X > 0)
		  LEDMask |= LEDS_LED1;
		else if (MouseReport.X < 0)
		  LEDMask |= LEDS_LED2;

		/* Alter status LEDs according to mouse Y movement */
		if (MouseReport.Y > 0)
		  LEDMask |= LEDS_LED3;
		else if (MouseReport.Y < 0)
		  LEDMask |= LEDS_LED4;

		/* Alter status LEDs according to mouse button position */
		if (MouseReport.Button)
		  LEDMask  = LEDS_ALL_LEDS;

		LEDs_SetAllLEDs(LEDMask);

		/* Print mouse report data through the serial port */
		printf_P(PSTR("dX:%2d dY:%2d Button:%d\r\n"), MouseReport.X,
													  MouseReport.Y,
													  MouseReport.Button);
	}

	/* Clear the IN endpoint, ready for next data packet */
	Pipe_ClearIN();

	/* Refreeze mouse data pipe */
	Pipe_Freeze();
}

/** Reads in and processes the next report from the attached device, displaying the report
 *  contents on the board LEDs and via the serial port.
 */
void ReadNextReport(void)
{
	USB_KeyboardReport_Data_t KeyboardReport;
		
	/* Select keyboard data pipe */
	Pipe_SelectPipe(KEYBOARD_DATAPIPE);	

	/* Unfreeze keyboard data pipe */
	Pipe_Unfreeze();

	/* Check to see if a packet has been received */
	if (!(Pipe_IsINReceived()))
	{
		/* Refreeze HID data IN pipe */
		Pipe_Freeze();
			
		return;
	}
	
	/* Ensure pipe contains data before trying to read from it */
	if (Pipe_IsReadWriteAllowed())
	{
		/* Read in keyboard report data */
		Pipe_Read_Stream_LE(&KeyboardReport, sizeof(KeyboardReport));

		/* Indicate if the modifier byte is non-zero (special key such as shift is being pressed) */
		LEDs_ChangeLEDs(LEDS_LED1, (KeyboardReport.Modifier) ? LEDS_LED1 : 0);
		
		/* Check if a key has been pressed */
		if (KeyboardReport.KeyCode)
		{
			/* Toggle status LED to indicate keypress */
			LEDs_ToggleLEDs(LEDS_LED2);
				  
			char PressedKey = 0;

			/* Retrieve pressed key character if alphanumeric */
			if ((KeyboardReport.KeyCode[0] >= 0x04) && (KeyboardReport.KeyCode[0] <= 0x1D))
			  PressedKey = (KeyboardReport.KeyCode[0] - 0x04) + 'A';
			else if ((KeyboardReport.KeyCode[0] >= 0x1E) && (KeyboardReport.KeyCode[0] <= 0x27))
			  PressedKey = (KeyboardReport.KeyCode[0] - 0x1E) + '0';
			else if (KeyboardReport.KeyCode[0] == 0x2C)
			  PressedKey = ' ';						
			else if (KeyboardReport.KeyCode[0] == 0x28)
			  PressedKey = '\n';
				 
			/* Print the pressed key character out through the serial port if valid */
			if (PressedKey)
			  putchar(PressedKey);
		}
	}
		
	/* Clear the IN endpoint, ready for next data packet */
	Pipe_ClearIN();

	/* Refreeze keyboard data pipe */
	Pipe_Freeze();
}

/** Internal Bluetooth stack Signal Command processing routine for an Information Request command.
 *
 *  \param[in]  SignalCommandHeader  Pointer to the start of the received packet's Signal Command header
 */
static inline void Bluetooth_Signal_InformationReq(const BT_Signal_Header_t* const SignalCommandHeader)
{
	BT_Signal_InformationReq_t InformationRequest;

	Pipe_Read_Stream_LE(&InformationRequest, sizeof(InformationRequest));

	BT_ACL_DEBUG(1, "<< L2CAP Information Request");
	BT_ACL_DEBUG(2, "-- Info Type: 0x%04X", InformationRequest.InfoType);

	Pipe_ClearIN();
	Pipe_Freeze();

	struct
	{
		BT_Signal_Header_t          SignalCommandHeader;
		BT_Signal_InformationResp_t InformationResponse;

		uint8_t Data[4];
	} ResponsePacket;

	uint8_t DataLen = 0;

	/* Retrieve the requested information and store it in the outgoing packet, if found */
	switch (InformationRequest.InfoType)
	{
		case BT_INFOREQ_MTU:
			ResponsePacket.InformationResponse.Result = BT_INFORMATION_SUCCESSFUL;
			DataLen = 2;

			*((uint16_t*)&ResponsePacket.Data) = MAXIMUM_CHANNEL_MTU;
			break;
		case BT_INFOREQ_EXTENDEDFEATURES:
			ResponsePacket.InformationResponse.Result = BT_INFORMATION_SUCCESSFUL;
			DataLen = 4;

			*((uint32_t*)&ResponsePacket.Data) = 0;
			break;
		default:
			ResponsePacket.InformationResponse.Result = BT_INFORMATION_NOTSUPPORTED;
			DataLen = 0;
			break;
	}

	/* Fill out the Signal Command header in the response packet */
	ResponsePacket.SignalCommandHeader.Code                 = BT_SIGNAL_INFORMATION_RESPONSE;
	ResponsePacket.SignalCommandHeader.Identifier           = SignalCommandHeader->Identifier;
	ResponsePacket.SignalCommandHeader.Length               = sizeof(ResponsePacket.InformationResponse) + DataLen;

	/* Fill out the Information Response in the response packet */
	ResponsePacket.InformationResponse.InfoType = InformationRequest.InfoType;

	Bluetooth_SendPacket(&ResponsePacket, (sizeof(ResponsePacket) - sizeof(ResponsePacket.Data) + DataLen), NULL);

	BT_ACL_DEBUG(1, ">> L2CAP Information Response");
	BT_ACL_DEBUG(2, "-- Result: 0x%02X", ResponsePacket.InformationResponse.Result);
}

void CDC_Host_USBTask(USB_ClassInfo_CDC_Host_t* const CDCInterfaceInfo)
{
	uint8_t portnum = CDCInterfaceInfo->Config.PortNumber;

	if ((USB_HostState[portnum] != HOST_STATE_Configured) || !(CDCInterfaceInfo->State.IsActive))
	  return;

	Pipe_SelectPipe(portnum,CDCInterfaceInfo->Config.NotificationPipeNumber);
	Pipe_Unfreeze();

	if (Pipe_IsINReceived(portnum))
	{
		USB_Request_Header_t Notification;
		Pipe_Read_Stream_LE(portnum,&Notification, sizeof(USB_Request_Header_t), NULL);

		if ((Notification.bRequest      == CDC_NOTIF_SerialState) &&
		    (Notification.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE)))
		{
			Pipe_Read_Stream_LE(portnum,
								&CDCInterfaceInfo->State.ControlLineStates.DeviceToHost,
			                    sizeof(CDCInterfaceInfo->State.ControlLineStates.DeviceToHost),
			                    NULL);

			Pipe_ClearIN(portnum);

			EVENT_CDC_Host_ControLineStateChanged(CDCInterfaceInfo);
		}
		else
		{
			Pipe_ClearIN(portnum);
		}
	}

	Pipe_Freeze();

	#if !defined(NO_CLASS_DRIVER_AUTOFLUSH)
	CDC_Host_Flush(CDCInterfaceInfo);
	#endif
}

uint8_t SImage_Host_ReadData(USB_ClassInfo_SI_Host_t* const SIInterfaceInfo, void* Buffer, const uint16_t Bytes)
{
	uint8_t ErrorCode;

	Pipe_SelectPipe(SIInterfaceInfo->Config.DataINPipeNumber);
	Pipe_Unfreeze();

	ErrorCode = Pipe_Read_Stream_LE(Buffer, Bytes, NO_STREAM_CALLBACK);

	Pipe_Freeze();
	
	return ErrorCode;
}

/** Task to read in data received from the attached CDC device and print it to the serial port.
 */
void CDCHost_Task(void)
{
	if (USB_HostState != HOST_STATE_Configured)
	  return;

	/* Select the data IN pipe */
	Pipe_SelectPipe(CDC_DATA_IN_PIPE);
	Pipe_Unfreeze();

	/* Check to see if a packet has been received */
	if (Pipe_IsINReceived())
	{
		/* Re-freeze IN pipe after the packet has been received */
		Pipe_Freeze();

		/* Check if data is in the pipe */
		if (Pipe_IsReadWriteAllowed())
		{
			/* Get the length of the pipe data, and create a new buffer to hold it */
			uint16_t BufferLength = Pipe_BytesInPipe();
			uint8_t  Buffer[BufferLength];

			/* Read in the pipe data to the temporary buffer */
			Pipe_Read_Stream_LE(Buffer, BufferLength, NULL);

			/* Print out the buffer contents to the USART */
			for (uint16_t BufferByte = 0; BufferByte < BufferLength; BufferByte++)
			  putchar(Buffer[BufferByte]);
		}

		/* Clear the pipe after it is read, ready for the next packet */
		Pipe_ClearIN();
	}

	/* Re-freeze IN pipe after use */
	Pipe_Freeze();

	/* Select and unfreeze the notification pipe */
	Pipe_SelectPipe(CDC_NOTIFICATION_PIPE);
	Pipe_Unfreeze();

	/* Check if a packet has been received */
	if (Pipe_IsINReceived())
	{
		/* Discard the unused event notification */
		Pipe_ClearIN();
	}

	/* Freeze notification IN pipe after use */
	Pipe_Freeze();
}

uint8_t SImage_Host_ReceiveEventHeader(USB_ClassInfo_SI_Host_t* const SIInterfaceInfo, SI_PIMA_Container_t* const PIMAHeader)
{
	uint8_t ErrorCode;

	Pipe_SelectPipe(SIInterfaceInfo->Config.EventsPipeNumber);
	Pipe_Unfreeze();
	
	ErrorCode = Pipe_Read_Stream_LE(PIMAHeader, sizeof(SI_PIMA_Container_t), NO_STREAM_CALLBACK);
	
	Pipe_ClearIN();
	Pipe_Freeze();
	
	return ErrorCode;
}

/** Sends or receives the transaction's data stage to or from the attached device, reading or
 *  writing to the nominated buffer.
 *
 *  \param[in] SCSICommandBlock  Pointer to a SCSI command block structure being sent to the attached device
 *  \param[in,out]  BufferPtr    Pointer to the data buffer to read from or write to
 *
 *  \return A value from the Pipe_Stream_RW_ErrorCodes_t enum
 */
static uint8_t MassStore_SendReceiveData(CommandBlockWrapper_t* const SCSICommandBlock,
                                         void* BufferPtr)
{
	uint8_t  ErrorCode = PIPE_RWSTREAM_NoError;
	uint16_t BytesRem  = SCSICommandBlock->DataTransferLength;

	/* Check the direction of the SCSI command data stage */
	if (SCSICommandBlock->Flags & COMMAND_DIRECTION_DATA_IN)
	{
		/* Wait until the device has replied with some data */
		if ((ErrorCode = MassStore_WaitForDataReceived()) != PIPE_RWSTREAM_NoError)
		  return ErrorCode;

		/* Select the IN data pipe for data reception */
		Pipe_SelectPipe(MASS_STORE_DATA_IN_PIPE);
		Pipe_Unfreeze();

		/* Read in the block data from the pipe */
		if ((ErrorCode = Pipe_Read_Stream_LE(BufferPtr, BytesRem)) != PIPE_RWSTREAM_NoError)
		  return ErrorCode;

		/* Acknowledge the packet */
		Pipe_ClearIN();
	}
	else
	{
		/* Select the OUT data pipe for data transmission */
		Pipe_SelectPipe(MASS_STORE_DATA_OUT_PIPE);
		Pipe_Unfreeze();

		/* Write the block data to the pipe */
		if ((ErrorCode = Pipe_Write_Stream_LE(BufferPtr, BytesRem)) != PIPE_RWSTREAM_NoError)
		  return ErrorCode;

		/* Acknowledge the packet */
		Pipe_ClearOUT();

		while (!(Pipe_IsOUTReady()))
		{
			if (USB_HostState == HOST_STATE_Unattached)
			  return PIPE_RWSTREAM_DeviceDisconnected;
		}
	}

	/* Freeze used pipe after use */
	Pipe_Freeze();

	return PIPE_RWSTREAM_NoError;
}

bool MIDI_Host_ReceiveEventPacket(USB_ClassInfo_MIDI_Host_t* const MIDIInterfaceInfo, MIDI_EventPacket_t* const Event)
{
	if ((USB_HostState != HOST_STATE_Configured) || !(MIDIInterfaceInfo->State.IsActive))
	  return HOST_SENDCONTROL_DeviceDisconnected;
	
	Pipe_SelectPipe(MIDIInterfaceInfo->Config.DataINPipeNumber);

	if (!(Pipe_IsReadWriteAllowed()))
	  return false;

	Pipe_Read_Stream_LE(Event, sizeof(MIDI_EventPacket_t), NO_STREAM_CALLBACK);

	if (!(Pipe_IsReadWriteAllowed()))
	  Pipe_ClearIN();
	
	return true;
}

/** Task to read in data received from the attached RNDIS device and print it to the serial port.
 */
void RNDISHost_Task(void)
{
	if (USB_HostState != HOST_STATE_Configured)
	  return;

	uint8_t ErrorCode;

	LEDs_SetAllLEDs(LEDMASK_USB_BUSY);

	uint16_t PacketLength;
	if ((ErrorCode = RNDIS_GetPacketLength(&PacketLength)) != HOST_SENDCONTROL_Successful)
	{
		printf_P(PSTR(ESC_FG_RED "Packet Reception Error.\r\n"
		                         " -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
		return;
	}

	if (!(PacketLength))
	  return;

	Pipe_Unfreeze();

	printf_P(PSTR("***PACKET (Size %d)***\r\n"), PacketLength);

	if (PacketLength > 1024)
	{
		puts_P(PSTR(ESC_FG_RED "Packet too large.\r\n" ESC_FG_WHITE));
		Pipe_Discard_Stream(PacketLength, NULL);
	}
	else
	{
		uint8_t PacketBuffer[PacketLength];

		Pipe_Read_Stream_LE(&PacketBuffer, PacketLength, NULL);

		for (uint16_t i = 0; i < PacketLength; i++)
		  printf("0x%02x ", PacketBuffer[i]);
	}

	Pipe_ClearIN();
	Pipe_Freeze();

	printf("\r\n\r\n");

	LEDs_SetAllLEDs(LEDMASK_USB_READY);
}

/** Function to receive the given data from the device, after a response block has been received.
 *
 *  \param[out] Buffer  Destination data buffer to put read bytes from the device
 *  \param[in] Bytes    Number of bytes to receive
 *
 *  \return A value from the Pipe_Stream_RW_ErrorCodes_t enum
 */
uint8_t SImage_ReadData(void* const Buffer,
                        const uint16_t Bytes)
{
	uint8_t ErrorCode;

	/* Unfreeze the data IN pipe */
	Pipe_SelectPipe(SIMAGE_DATA_IN_PIPE);
	Pipe_Unfreeze();

	/* Read in the data into the buffer */
	ErrorCode = Pipe_Read_Stream_LE(Buffer, Bytes, NULL);

	/* Freeze the pipe again after use */
	Pipe_Freeze();

	return ErrorCode;
}

uint8_t SI_Host_ReceiveEventHeader(USB_ClassInfo_SI_Host_t* const SIInterfaceInfo,
                                   PIMA_Container_t* const PIMAHeader)
{
	uint8_t ErrorCode;

	if ((USB_HostState != HOST_STATE_Configured) || !(SIInterfaceInfo->State.IsActive))
	  return PIPE_RWSTREAM_DeviceDisconnected;

	Pipe_SelectPipe(SIInterfaceInfo->Config.EventsPipeNumber);
	Pipe_Unfreeze();

	ErrorCode = Pipe_Read_Stream_LE(PIMAHeader, sizeof(PIMA_Container_t), NO_STREAM_CALLBACK);

	Pipe_ClearIN();
	Pipe_Freeze();

	return ErrorCode;
}