C++ NV_Read函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中NV_Read函数的典型用法代码示例。如果您正苦于以下问题：C++ NV_Read函数的具体用法？C++ NV_Read怎么用？C++ NV_Read使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了NV_Read函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: TAF_APS_ReadDsflowRateConfigFromNv

VOS_VOID TAF_APS_ReadDsflowRateConfigFromNv(TAF_APS_SWITCH_DDR_RATE_INFO_STRU *pstSwitchDdrInfo)
{
    TAF_NV_DFS_DSFLOW_RATE_CONFIG_STRU          stRateConfig;
    TAF_NV_MULTI_DFS_DSFLOW_RATE_CONFIG_STRU    stMultiDfsConfig;
    VOS_UINT32                                  ulIndex;

    PS_MEM_SET(&stRateConfig, 0, sizeof(TAF_NV_DFS_DSFLOW_RATE_CONFIG_STRU));
    PS_MEM_SET(&stMultiDfsConfig, 0, sizeof(TAF_NV_MULTI_DFS_DSFLOW_RATE_CONFIG_STRU));

    /* 从NV中读取流速配置NV项 */
    if (NV_OK != NV_Read (en_NV_Item_Dfs_Dsflow_Rate_Config,
                          &stRateConfig, sizeof(TAF_NV_DFS_DSFLOW_RATE_CONFIG_STRU)))
    {
        TAF_ERROR_LOG(WUEPS_PID_TAF, "TAF_APS_ReadDsflowRateConfigFromNv(): NV_Read en_NV_Item_Dsflow_Rate_Config Error");
        return;
    }

    if (NV_OK != NV_Read (en_NV_Item_Multi_Dfs_Dsflow_Rate_CFG,
                          &stMultiDfsConfig, sizeof(TAF_NV_MULTI_DFS_DSFLOW_RATE_CONFIG_STRU)))
    {
        TAF_ERROR_LOG(WUEPS_PID_TAF, "TAF_APS_ReadDsflowRateConfigFromNv(): NV_Read en_NV_Item_Multi_Dfs_Dsflow_Rate_CFG Error");
        return;
    }

    if (0 == stMultiDfsConfig.astDfsConfig[0].ulProfileNum)
    {
        if (0 == stRateConfig.ulProfileNum)
        {
            PS_MEM_SET((VOS_VOID *)pstSwitchDdrInfo->astDfsConfig, 0, sizeof(TAF_NV_DFS_DSFLOW_RATE_CONFIG_STRU) * TAF_NVIM_DIFF_DFS_NUM);
            return;
        }

        pstSwitchDdrInfo->ulMultiDfsFlg = VOS_FALSE;

        TAF_APS_Recorrect_ProfileNum(&stRateConfig, 1);
        PS_MEM_CPY(&pstSwitchDdrInfo->astDfsConfig[0], &stRateConfig, sizeof(TAF_NV_DFS_DSFLOW_RATE_CONFIG_STRU));
    }
    else
    {
        pstSwitchDdrInfo->ulMultiDfsFlg = VOS_TRUE;

        TAF_APS_Recorrect_ProfileNum(stMultiDfsConfig.astDfsConfig, TAF_NVIM_DIFF_DFS_NUM);
        PS_MEM_CPY((VOS_VOID *)pstSwitchDdrInfo->astDfsConfig, (VOS_VOID *)stMultiDfsConfig.astDfsConfig, sizeof(TAF_NV_MULTI_DFS_DSFLOW_RATE_CONFIG_STRU));
    }

    /* NV的第一个profile存的是最小的ddr频率 */
    pstSwitchDdrInfo->ulMinBand = pstSwitchDdrInfo->astDfsConfig[0].astProfile[0].ulDdrBand;

    /* NV的最后一个profile存的是最大的ddr频率 */
    ulIndex = pstSwitchDdrInfo->astDfsConfig[0].ulProfileNum - 1;
    pstSwitchDdrInfo->ulMaxBand = pstSwitchDdrInfo->astDfsConfig[0].astProfile[ulIndex].ulDdrBand;

    return;
}

开发者ID:herryfan，项目名称:kernel-huawei-h60，代码行数:54，代码来源:TafApsProcNvim.c

示例2: TAF_MMA_ReadRfAutoTestFlagNvim

VOS_VOID TAF_MMA_ReadRfAutoTestFlagNvim(VOS_VOID)
{
    VOS_UINT32                          ulDataLen;
    VOS_UINT32                          ulAutoSwitchOnFlg;

    ulAutoSwitchOnFlg   = MMA_RF_AUTO_TEST_DISABLE;
    ulDataLen           = sizeof(VOS_UINT16);

    if (NV_OK != NV_Read(en_NV_Item_RF_Auto_Test_Flag,
                          (VOS_VOID*)(&(ulAutoSwitchOnFlg)),
                           ulDataLen))
    {
       TAF_MMA_SetAutoSwitchOnFlg(MMA_RF_AUTO_TEST_ENABLE);

       return;
    }

    TAF_MMA_SetAutoSwitchOnFlg(ulAutoSwitchOnFlg);

#if 0
#ifdef NAS_STUB
    TAF_MMA_SetAutoSwitchOnFlg(MMA_RF_AUTO_TEST_DISABLE);
#endif
#endif

    return;
}

开发者ID:debbiche，项目名称:android_kernel_huawei_p8，代码行数:27，代码来源:TafMmaProcNvim.c

示例3: MN_CAL_ReadVideoCallNvim

VOS_VOID  MN_CAL_ReadVideoCallNvim( VOS_VOID )
{
    MN_CALL_NV_ITEM_VIDEO_CALL_STRU               stVideoCall;
    VOS_UINT32                                    ulResult;
    VOS_UINT32                                    ulLength;

    ulLength                 = 0;

    stVideoCall.ucStatus     = VOS_FALSE;
    stVideoCall.ucVpCfgState = MN_CALL_VP_BUTT;
    
    NV_GetLength(en_NV_Item_VIDEO_CALL, &ulLength);	

    ulResult = NV_Read(en_NV_Item_VIDEO_CALL,
                       &stVideoCall,
                       ulLength);

    /* PC工程,回放工程,CC默认打开 */
#if (defined(__PS_WIN32_RECUR__))
        stVideoCall.ucStatus = VOS_TRUE;
        stVideoCall.ucVpCfgState = MN_CALL_VP_MO_MT_BOTH;
#endif
     if((ulResult == NV_OK)
     &&(VOS_TRUE == stVideoCall.ucStatus))
     {
        TAF_CALL_SetVpCfgState(stVideoCall.ucVpCfgState);
     }
     else
     {
        TAF_CALL_SetVpCfgState(MN_CALL_VP_MO_MT_BOTH);
     }

    return;
}

开发者ID:magnusjjj，项目名称:android_kernel_huawei_rle，代码行数:34，代码来源:MnCallProcNvim.c

示例4: MN_CALL_ReadCustomizeServiceNvim

VOS_VOID  MN_CALL_ReadCustomizeServiceNvim( VOS_VOID )
{
    NAS_NVIM_CUSTOMIZE_SERVICE_STRU               stCustomServ;
    VOS_UINT32                                    ulResult;


    stCustomServ.ulStatus           = VOS_FALSE;
    stCustomServ.ulCustomizeService = VOS_FALSE;

    /* 读取对应的几个NV项，并保存到全局变量中 */
    ulResult = NV_Read(en_NV_Item_CustomizeService,
                       &stCustomServ,
                       sizeof(stCustomServ));

    /* PC工程,回放工程,CC默认打开 */
#if (defined(__PS_WIN32_RECUR__))
        stCustomServ.ulStatus = VOS_TRUE;
        stCustomServ.ulCustomizeService = VOS_TRUE;
#endif
    if((ulResult == NV_OK)
    &&(VOS_TRUE == stCustomServ.ulStatus)
    &&(VOS_TRUE == (stCustomServ.ulCustomizeService&0x01)))
    {
       TAF_CALL_SetCallStatusControl(VOS_TRUE);
    }
    else
    {
        TAF_CALL_SetCallStatusControl(VOS_FALSE);
    }
    return;
}

开发者ID:magnusjjj，项目名称:android_kernel_huawei_rle，代码行数:31，代码来源:MnCallProcNvim.c

示例5: BST_SYS_InitBastetNvFlag

BST_VOID BST_SYS_InitBastetNvFlag(BST_VOID)
{
    BASTET_SUPPORT_FLG_STRU                     stBastetFlag;

    PS_MEM_SET(&stBastetFlag, 0x00, sizeof(BASTET_SUPPORT_FLG_STRU));

    /* 读NV项en_NV_MODEM_RF_SHARE_CFG，失败，直接返回 */
    if (NV_OK != NV_Read(en_NV_Item_Bastet_CONFIG,
                         &stBastetFlag, sizeof(BASTET_SUPPORT_FLG_STRU)))
    {
        BST_RLS_LOG("BST_SYS_InitBastetNvFlag():WARNING: read en_NV_Item_Bastet_CONFIG Error");

        return;
    }

    if (BST_TRUE != stBastetFlag.ucActiveFlg)
    {
        /* NV内容异常保护 */
        g_BstBastetFlg  = BST_FALSE;
    }
    else
    {
        g_BstBastetFlg  = BST_TRUE;
    }


    return;
}

开发者ID:magnusjjj，项目名称:android_kernel_huawei_rle，代码行数:28，代码来源:BST_Platform.c

示例6: CNAS_HSM_ReadHrpdAccessAuthInfoNvim

VOS_VOID CNAS_HSM_ReadHrpdAccessAuthInfoNvim(VOS_VOID)
{
    CNAS_NVIM_HRPD_ACCESS_AUTH_INFO_STRU                    stHrpdAccessAuthInfo;
    CNAS_CCB_HRPD_ACCESS_AUTH_INFO_STRU                    *pstLastHrpdAccessAuthInfo;

    pstLastHrpdAccessAuthInfo = CNAS_HSM_GetLastHrpdAccessAuthInfoCtxAddr();

    NAS_MEM_SET_S(&stHrpdAccessAuthInfo, sizeof(stHrpdAccessAuthInfo), 0, sizeof(CNAS_NVIM_HRPD_ACCESS_AUTH_INFO_STRU));

    if (NV_OK != NV_Read(en_Nv_Item_CNAS_HRPD_ACCESS_AUTH_INFO, &stHrpdAccessAuthInfo,
                         sizeof(CNAS_NVIM_HRPD_ACCESS_AUTH_INFO_STRU)))
    {
        CNAS_ERROR_LOG(UEPS_PID_HSM, "CNAS_HSM_ReadHrpdAccessAuthInfoNvim: Read Nvim Failed");

        return;
    }

    CNAS_MNTN_LogReadNVInfo(en_Nv_Item_CNAS_HRPD_ACCESS_AUTH_INFO,
                            sizeof(CNAS_NVIM_HRPD_ACCESS_AUTH_INFO_STRU),
                            UEPS_PID_HSM,
                            (VOS_UINT8 *)&stHrpdAccessAuthInfo);

    pstLastHrpdAccessAuthInfo->ucAccessAuthAvailFlag   = stHrpdAccessAuthInfo.ucAccessAuthAvailFlag;

    if (VOS_TRUE == stHrpdAccessAuthInfo.ucAccessAuthAvailFlag)
    {
        pstLastHrpdAccessAuthInfo->ucAccessAuthUserNameLen = stHrpdAccessAuthInfo.ucAccessAuthUserNameLen;
        NAS_MEM_CPY_S(pstLastHrpdAccessAuthInfo->aucAccessAuthUserName,
                      sizeof(pstLastHrpdAccessAuthInfo->aucAccessAuthUserName),
                      stHrpdAccessAuthInfo.aucAccessAuthUserName,
                      stHrpdAccessAuthInfo.ucAccessAuthUserNameLen);
    }
}

开发者ID:XePeleato，项目名称:android_kernel_huawei_venus，代码行数:33，代码来源:CnasHsmProcNvim.c

示例7: CNAS_HSM_ReadHrpdSessionInfoExNvim

VOS_VOID CNAS_HSM_ReadHrpdSessionInfoExNvim(VOS_VOID)
{
    CNAS_NVIM_HRPD_SESSION_INFO_EX_STRU                     stHrpdSessionInfoEx;
    CNAS_NVIM_HRPD_UE_REV_INFO_STRU                        *pstLastHrpdUERevInfo;

    NAS_MEM_SET_S(&stHrpdSessionInfoEx, sizeof(stHrpdSessionInfoEx), 0, sizeof(CNAS_NVIM_HRPD_SESSION_INFO_EX_STRU));

    if (NV_OK != NV_Read(en_NV_Item_CNAS_HRPD_Session_Info_Ex, &stHrpdSessionInfoEx,
                         sizeof(CNAS_NVIM_HRPD_SESSION_INFO_EX_STRU)))
    {
        CNAS_ERROR_LOG(UEPS_PID_HSM, "CNAS_HSM_ReadHrpdSessionInfoExNvim: Read Nvim Failed");

        return;
    }

    CNAS_MNTN_LogReadNVInfo(en_NV_Item_CNAS_HRPD_Session_Info_Ex,
                            sizeof(CNAS_NVIM_HRPD_SESSION_INFO_EX_STRU),
                            UEPS_PID_HSM,
                            (VOS_UINT8 *)&stHrpdSessionInfoEx);

    CNAS_HSM_SetSessionSeed(stHrpdSessionInfoEx.ulSessionSeed);

    pstLastHrpdUERevInfo = CNAS_HSM_GetLastHrpdUERevInfoCtxAddr();

    NAS_MEM_CPY_S(pstLastHrpdUERevInfo,
                  sizeof(CNAS_NVIM_HRPD_UE_REV_INFO_STRU),
                  &(stHrpdSessionInfoEx.stUERevInfo),
                  sizeof(CNAS_NVIM_HRPD_UE_REV_INFO_STRU));
}

开发者ID:XePeleato，项目名称:android_kernel_huawei_venus，代码行数:29，代码来源:CnasHsmProcNvim.c

示例8: NAS_UTRANCTRL_ReadSmcCtrlFlgNvim

VOS_VOID NAS_UTRANCTRL_ReadSmcCtrlFlgNvim( VOS_VOID )
{
    NAS_UTRANCTRL_NVIM_SMC_CTRL_FLAG_STRU                   stSmcCtrlFlg;

    PS_MEM_SET(&stSmcCtrlFlg, 0x00, sizeof(NAS_UTRANCTRL_NVIM_SMC_CTRL_FLAG_STRU));

    if ( NV_OK != NV_Read(en_NV_Item_SMC_Ctrl_Flg, &stSmcCtrlFlg, sizeof(NAS_UTRANCTRL_NVIM_SMC_CTRL_FLAG_STRU)) )
    {
        NAS_ERROR_LOG(WUEPS_PID_MMC, "NAS_UTRANCTRL_ReadSmcCtrlFlgNvim():WARNING: en_NV_Item_SMC_Ctrl_Flg Error");

        return;
    }

    /* NV中的异常原因值转换 */
    if ( (VOS_FALSE != stSmcCtrlFlg.ucIsUtranTddCsSmcNeeded) 
      && (VOS_TRUE  != stSmcCtrlFlg.ucIsUtranTddCsSmcNeeded))
    {
        stSmcCtrlFlg.ucIsUtranTddCsSmcNeeded = VOS_TRUE;
    }

    if ( (VOS_FALSE != stSmcCtrlFlg.ucIsUtranTddPsSmcNeeded) 
      && (VOS_TRUE  != stSmcCtrlFlg.ucIsUtranTddPsSmcNeeded))
    {
        stSmcCtrlFlg.ucIsUtranTddPsSmcNeeded = VOS_TRUE;
    }

    /* 保存NVIM中的UTRAN TDD模式下是否需要检测SMC流程值 */
    NAS_UTRANCTRL_SetUtranTddCsSmcNeededFlg(stSmcCtrlFlg.ucIsUtranTddCsSmcNeeded);
    NAS_UTRANCTRL_SetUtranTddPsSmcNeededFlg(stSmcCtrlFlg.ucIsUtranTddPsSmcNeeded);

    return;
}

开发者ID:debbiche，项目名称:android_kernel_huawei_p8，代码行数:32，代码来源:NasUtranCtrlProcNvim.c

示例9: USIMM_VsimConfidentialDataVerifyErrHandle

VOS_VOID USIMM_VsimConfidentialDataVerifyErrHandle(VOS_VOID)
{
    NVIM_VSIM_HVSDH_NV_STRU             stDhNv = {0};
    VSIM_ALGORITHM_TYPE_ENUM_UINT32     enAlgorithm = {0};

    USIMM_ClearVsimGlobal();

    /* 清除公私钥 */
    if (NV_OK != NV_Read(en_NV_Item_VSIM_HVSDH_INFO, &stDhNv, sizeof(stDhNv)))
    {
        USIMM_WARNING_LOG("USIMM_VsimConfidentialDataVerify: Get HVSDT Info failed.");
    }

    enAlgorithm = stDhNv.enAlgorithm;

    VOS_MemSet(&stDhNv, 0, sizeof(NVIM_VSIM_HVSDH_NV_STRU));

    stDhNv.enAlgorithm = enAlgorithm;

    if (NV_OK != NV_Write(en_NV_Item_VSIM_HVSDH_INFO, &stDhNv, sizeof(stDhNv)))
    {
        USIMM_WARNING_LOG("USIMM_VsimConfidentialDataVerify: Clean HVSDT Info failed.");
    }

    USIMM_VsimReDhNegotiateInd();

    return;
}

开发者ID:debbiche，项目名称:android_kernel_huawei_p8，代码行数:28，代码来源:usimmvsim.c

示例10: Monitor_Init

VOS_UINT32 Monitor_Init(VOS_VOID)
{

    /*读取开关分集的USIM卡温度门限*/
    if(NV_OK != NV_Read(en_NV_Item_W_USIM_TEMP_ANT2_CTRL,
                            (VOS_VOID*)&g_stMonitorUsimAntCtrl,
                            sizeof(MONITOR_USIM_ANT2_CTRL)))
    {
        g_ulMonitorErrCode |= MONITOR_ERR_CODE_NV;

        return VOS_ERR;
    }

    if (VOS_OK != VOS_SmCCreate("MONS", 0, VOS_SEMA4_FIFO, &(g_ulMonitorCtrlSem)))
    {
        g_ulMonitorErrCode |= MONITOR_ERR_CODE_SEM;

        return VOS_ERR;
    }

#if (VOS_VXWORKS == VOS_OS_VER)
    taskSpawn("MONITOR_TASK", 159, 0, 10240,(FUNCPTR)Monitor_QueryTask, 0, 0, 0, 0, 0, 0, 0, 0,0,0);
#endif

    return VOS_OK;
}

开发者ID:magnusjjj，项目名称:android_kernel_huawei_rle，代码行数:26，代码来源:monitor.c

示例11: STK_ProfileInit

VOS_VOID STK_ProfileInit(USIMM_STK_CFG_STRU *pstSTKProfileContent, VOS_UINT32 ulCardType)
{
    VOS_UINT8                           aucUsimProfile[]=STK_USIM_PROFILE_DEFAULT;
    VOS_UINT8                           aucSimProfile[]= {0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFE,0xFF,0xFF,0xC0,
                                                          0xFF,0xFF,0xFF,0xF9,0xFF,0xF7,0xC0,0xFF,0xF0,0xFF};

    if (NV_OK == NV_Read(en_NV_Item_TerminalProfile_Set, pstSTKProfileContent, sizeof(USIMM_STK_CFG_STRU)))
    {
        return;
    }

    pstSTKProfileContent->ucTimer       = STK_POROTECT_TIME_LEN;    /*定时器长度的单位是秒*/
    pstSTKProfileContent->ucFuncEnable  = TAF_TRUE;

    if (USIMM_CARD_USIM == ulCardType)
    {
        VOS_MemCpy(pstSTKProfileContent->stUsimProfile.aucProfile, aucUsimProfile, sizeof(aucUsimProfile));

        pstSTKProfileContent->stUsimProfile.ucProfileLen = sizeof(aucUsimProfile);
    }
    else
    {
        VOS_MemCpy(pstSTKProfileContent->stSimProfile.aucProfile, aucSimProfile, sizeof(aucSimProfile));

        pstSTKProfileContent->stSimProfile.ucProfileLen = sizeof(aucSimProfile);
    }

    return;
}

开发者ID:debbiche，项目名称:android_kernel_huawei_p8，代码行数:29，代码来源:stkgobal.c

示例12: PPM_LogFileInit

VOS_UINT32 PPM_LogFileInit(VOS_VOID)
{
    OM_CHANNLE_PORT_CFG_STRU            stPortCfg;

    /*读取SD Log在NV中的配置*/
    if(NV_OK != NV_Read(en_NV_Item_Om_Port_Type, &stPortCfg, sizeof(OM_CHANNLE_PORT_CFG_STRU)))
    {
        PS_LOG(WUEPS_PID_OM, 0, PS_PRINT_ERROR, "PPM_LogFileInit:Read NV Config fail!");

        return VOS_OK;
    }

    /* 读取SD Log在NV中的配置为输出到SD卡的时候才使能 */
    if (CPM_OM_PORT_TYPE_SD == stPortCfg.enPortNum)
    {
        OM_SDInit();

        return VOS_OK;
    }
#if (VOS_OS_VER == VOS_LINUX)
    else if (CPM_OM_PORT_TYPE_FS == stPortCfg.enPortNum)
    {
        PPM_FSInitLogFile();

        return VOS_OK;
    }
#endif

    return VOS_OK;
}

开发者ID:fly2436732935，项目名称:android_kernel_honor7_PLK-AL10_PLK-TL01H_PLK-UL00_PLK-CL00_PLK-TL00，代码行数:30，代码来源:OmSdPpm.c

示例13: TAF_MMA_ReadAttEnsCustomNvim

VOS_VOID TAF_MMA_ReadAttEnsCustomNvim(VOS_VOID)
{
    NVIM_ATT_ENS_CTRL_STRU              stNvAttEns;


    PS_MEM_SET(&stNvAttEns, 0x00, sizeof(stNvAttEns));

    /* 读NV项en_NV_Item_Att_Ens_Ctrl_Para失败 */
    if (NV_OK != NV_Read(en_NV_Item_Att_Ens_Ctrl_Para,
                         &stNvAttEns,
                         sizeof(NVIM_ATT_ENS_CTRL_STRU)))
    {
        MMA_ERRORLOG("TAF_MMA_ReadATTCustomNvim(): Read NV Fail");
        return;
    }

    /* 置网络选择菜单控制标识 */
    if (VOS_TRUE == stNvAttEns.ucNetSelMenuFlg)
    {
        TAF_MMA_SetNetworkSelectionMenuEnableFlg(VOS_TRUE);
    }

    /* 置接入技术平衡控制标识 */
    if (VOS_TRUE == stNvAttEns.ucRatBalancingFlg)
    {
        TAF_MMA_SetRatBalancingEnableFlg(VOS_TRUE);
    }

    return;
}

开发者ID:debbiche，项目名称:android_kernel_huawei_p8，代码行数:30，代码来源:TafMmaProcNvim.c

示例14: TAF_MMA_ReadSystemAppCofigNvim

VOS_VOID TAF_MMA_ReadSystemAppCofigNvim(VOS_VOID)
{
    VOS_UINT32                          ulLength;
    NAS_NVIM_SYSTEM_APP_CONFIG_STRU     stSysAppConfig;

    PS_MEM_SET(&stSysAppConfig, 0x00, sizeof(NAS_NVIM_SYSTEM_APP_CONFIG_STRU));

    /* 读取en_NV_Item_System_APP_Config，获取对接的上层应用 */
    NV_GetLength(en_NV_Item_System_APP_Config, &ulLength);

    if (NV_OK != NV_Read(en_NV_Item_System_APP_Config,
                         &stSysAppConfig, ulLength))
    {
        stSysAppConfig.usSysAppConfigType = SYSTEM_APP_MP;
        MMA_WARNINGLOG("TAF_MMA_ReadSystemAppCofigNvim():Read en_NV_Item_System_APP_Config Failed!");
    }

    if ( SYSTEM_APP_ANDROID < stSysAppConfig.usSysAppConfigType)
    {
        g_usMmaAppConfigSupportType = SYSTEM_APP_MP;
        MMA_WARNINGLOG("TAF_MMA_ReadSystemAppCofigNvim():en_NV_Item_System_APP_Config error!");
    }
    else
    {
        g_usMmaAppConfigSupportType = stSysAppConfig.usSysAppConfigType;
    }


    return;
}

开发者ID:debbiche，项目名称:android_kernel_huawei_p8，代码行数:30，代码来源:TafMmaProcNvim.c

示例15: TAF_MMA_ReadDisplaySpnFlagNvim

VOS_VOID TAF_MMA_ReadDisplaySpnFlagNvim(VOS_VOID)
{
    VOS_UINT32                          ulLength;
    NAS_MMA_NVIM_DISPLAY_SPN_FLAG_STRU  stSpnFlag;

    PS_MEM_SET(&stSpnFlag, 0x00, sizeof(NAS_MMA_NVIM_DISPLAY_SPN_FLAG_STRU));
    NV_GetLength(en_NV_Item_Display_Spn_Flag, &ulLength);

    if (NV_OK != NV_Read(en_NV_Item_Display_Spn_Flag,
                          (VOS_VOID*)(&stSpnFlag),
                           ulLength))
    {
       gstMmaValue.ucCopsNotDisplaySpnFlg = MMA_FALSE;
    }
    else if (NV_ITEM_ACTIVE == (stSpnFlag.aucDisplaySpnFlag)[0])
    {
        gstMmaValue.ucCopsNotDisplaySpnFlg = (stSpnFlag.aucDisplaySpnFlag)[1];
    }
    else
    {

    }

    return;
}

开发者ID:debbiche，项目名称:android_kernel_huawei_p8，代码行数:25，代码来源:TafMmaProcNvim.c

示例16: SSA_GetUssdMode

VOS_VOID SSA_GetUssdMode(VOS_VOID)
{
    TAF_USSD_NVIM_TRANS_MODE_STRU       stUssdTranMode;
    VOS_UINT32                          ulLength;

    ulLength = 0;


    PS_MEM_SET(&stUssdTranMode, 0x00, sizeof(stUssdTranMode));

    NV_GetLength(en_NV_Item_CUST_USSD_MODE, &ulLength);

    /*读取USSD是否透传设置 */
    if (NV_OK == NV_Read(en_NV_Item_CUST_USSD_MODE,
                          &stUssdTranMode,
                          ulLength))
    {
        if (TAF_SSA_NVIM_ITEM_ACTIVE == stUssdTranMode.ucStatus)
        {
            g_usTafSsaUssdTransMode = stUssdTranMode.ucUssdTransMode;
        }
        else
        {
            g_usTafSsaUssdTransMode = AT_USSD_TRAN_MODE;
        }
    }
    else
    {
        g_usTafSsaUssdTransMode = AT_USSD_TRAN_MODE;
    }

    return;
}

开发者ID:debbiche，项目名称:android_kernel_huawei_p8，代码行数:33，代码来源:SsTaskEntry.c

示例17: NAS_UTRANCTRL_ReadUtranModeNvim

VOS_VOID NAS_UTRANCTRL_ReadUtranModeNvim( VOS_VOID )
{
    NAS_UTRANCTRL_NVIM_UTRAN_MODE_STRU  stUtranMode;
    VOS_UINT32                          ulLength;

    ulLength = 0;

    PS_MEM_SET(&stUtranMode, 0x00, sizeof(NAS_UTRANCTRL_NVIM_UTRAN_MODE_STRU));

    NV_GetLength(en_NV_Item_Utran_Mode, &ulLength);	
    if (ulLength > sizeof(stUtranMode))
    {
        return;
    }

    if ( NV_OK != NV_Read(en_NV_Item_Utran_Mode, &stUtranMode, ulLength) )
    {
        NAS_ERROR_LOG(WUEPS_PID_MMC, "NAS_UTRANCTRL_ReadUtranModeNvim():WARNING: en_NV_Item_Utran_Mode Error");

        return;
    }

    /* 将NVIM中读取的UTRAN模式保存到NASUTRANCTRL中的全局变量中 */
    NAS_UTRANCTRL_SetCurrUtranMode(stUtranMode.ucUtranMode);

    return;
}

开发者ID:debbiche，项目名称:android_kernel_huawei_p8，代码行数:27，代码来源:NasUtranCtrlProcNvim.c

示例18: CNAS_HSM_ReadSessionKeepAliveInfoNvim

VOS_VOID CNAS_HSM_ReadSessionKeepAliveInfoNvim(VOS_VOID)
{
    CNAS_HSM_NVIM_SESSION_KEEP_ALIVE_INFO_STRU              stNvimKeepAliveInfo;

    NAS_MEM_SET_S(&stNvimKeepAliveInfo, sizeof(stNvimKeepAliveInfo), 0, sizeof(CNAS_HSM_NVIM_SESSION_KEEP_ALIVE_INFO_STRU));

    if (NV_OK != NV_Read(en_Nv_Item_CNAS_HRPD_Session_Keep_Alive_Info, &stNvimKeepAliveInfo,
                         sizeof(CNAS_HSM_NVIM_SESSION_KEEP_ALIVE_INFO_STRU)))
    {
        CNAS_ERROR_LOG(UEPS_PID_HSM, "CNAS_HSM_ReadSessionKeepAliveInfoNvim: Error in NV_Read");
        return;
    }

    CNAS_MNTN_LogReadNVInfo(en_Nv_Item_CNAS_HRPD_Session_Keep_Alive_Info,
                            sizeof(CNAS_HSM_NVIM_SESSION_KEEP_ALIVE_INFO_STRU),
                            UEPS_PID_HSM,
                            (VOS_UINT8 *)&stNvimKeepAliveInfo);

    /* invalid keep alive info,directly return */
    if (VOS_FALSE == stNvimKeepAliveInfo.ucIsKeepAliveInfoValid)
    {
        return;
    }

    /* Copy the values from the NV to the Keep alive timer context */
    CNAS_HSM_SetTsmpClose(stNvimKeepAliveInfo.usTsmpClose);
    CNAS_HSM_SetKeepAliveInfoValidFlag(stNvimKeepAliveInfo.ucIsKeepAliveInfoValid);
    CNAS_HSM_SetTsmpCloseRemainTime(stNvimKeepAliveInfo.ulTsmpCloseRemainTime);
    CNAS_HSM_SetLastPowerOffSysTime(stNvimKeepAliveInfo.aulLastPowerOffSysTime);
}

开发者ID:XePeleato，项目名称:android_kernel_huawei_venus，代码行数:30，代码来源:CnasHsmProcNvim.c

示例19: CNAS_HSM_ReadHrpdUERevInfoNvim

VOS_VOID CNAS_HSM_ReadHrpdUERevInfoNvim(VOS_VOID)
{
    CNAS_NVIM_HRPD_UE_REV_INFO_STRU                        *pstHrpdUERevInfo;
    CNAS_NVIM_HRPD_UE_REV_INFO_STRU                         stHrpdUERevInfo;

    NAS_MEM_SET_S(&stHrpdUERevInfo, sizeof(stHrpdUERevInfo), 0, sizeof(CNAS_NVIM_HRPD_UE_REV_INFO_STRU));

    if (NV_OK != NV_Read(en_NV_Item_CAS_HRPD_NVIM_AT_REV, &stHrpdUERevInfo,
                         sizeof(CNAS_NVIM_HRPD_UE_REV_INFO_STRU)))
    {
        CNAS_ERROR_LOG(UEPS_PID_HSM, "CNAS_HSM_ReadHrpdUERevInfoNvim: Read Nvim Failed");

        return;
    }

    CNAS_MNTN_LogReadNVInfo(en_NV_Item_CAS_HRPD_NVIM_AT_REV,
                            sizeof(CNAS_NVIM_HRPD_UE_REV_INFO_STRU),
                            UEPS_PID_HSM,
                            (VOS_UINT8 *)&stHrpdUERevInfo);

    pstHrpdUERevInfo = CNAS_HSM_GetHrpdUERevInfoCtxAddr();

    NAS_MEM_CPY_S(pstHrpdUERevInfo, sizeof(CNAS_NVIM_HRPD_UE_REV_INFO_STRU), &stHrpdUERevInfo, sizeof(CNAS_NVIM_HRPD_UE_REV_INFO_STRU));

}

开发者ID:XePeleato，项目名称:android_kernel_huawei_venus，代码行数:25，代码来源:CnasHsmProcNvim.c

示例20: NAS_RABM_ReadVoicePreferNvim

VOS_VOID NAS_RABM_ReadVoicePreferNvim(VOS_VOID)
{
    NAS_RABM_NVIM_WCDMA_VOICE_PREFER_STRU                   stVoicePreferCfg;
    VOS_UINT32                                              ulLength;

    ulLength = 0;
    PS_MEM_SET(&stVoicePreferCfg, 0x00, sizeof(NAS_RABM_NVIM_WCDMA_VOICE_PREFER_STRU));

    /* 读NV失败，认为不允许VoicePrefer */
    NV_GetLength(en_NV_Item_Wcdma_Voice_Prefer_Cfg, &ulLength);

    if (ulLength > sizeof(NAS_RABM_NVIM_WCDMA_VOICE_PREFER_STRU))
    {
        NAS_WARNING_LOG(WUEPS_PID_RABM, "NAS_RABM_ReadVoicePreferNvim:WARNING:NV_GetLength ulLength fail!");
        g_stNasRabmVoicePreferCtx.ucVoicePreferNvimEnableFlag = VOS_FALSE;
        return;
    }

    if (NV_OK != NV_Read(en_NV_Item_Wcdma_Voice_Prefer_Cfg, &stVoicePreferCfg,
                         ulLength))
    {
        NAS_WARNING_LOG(WUEPS_PID_RABM, "NAS_RABM_ReadVoicePreferNvim:WARNING:NV_Read faild!");
        g_stNasRabmVoicePreferCtx.ucVoicePreferNvimEnableFlag = VOS_FALSE;
        return;
    }

    g_stNasRabmVoicePreferCtx.ucVoicePreferNvimEnableFlag = stVoicePreferCfg.ucEnableFlag;
    g_stNasRabmVoicePreferCtx.ulNvTestMcc = stVoicePreferCfg.ulMcc;
    g_stNasRabmVoicePreferCtx.ulNvTestMnc = stVoicePreferCfg.ulMnc;

    return;
}

开发者ID:debbiche，项目名称:android_kernel_huawei_p8，代码行数:32，代码来源:NasRabmMain.c

注：本文中的NV_Read函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ NV_SUBDEV函数代码示例发布时间：2022-05-30

C++ NV_MAT_V函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19254|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：10005|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8335|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8703|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8650|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9675|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8635|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：8008|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8671|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7542|2022-11-06

客服电话

电子邮件

C++ NV_Read函数代码示例

示例1: TAF_APS_ReadDsflowRateConfigFromNv

示例2: TAF_MMA_ReadRfAutoTestFlagNvim

示例3: MN_CAL_ReadVideoCallNvim

示例4: MN_CALL_ReadCustomizeServiceNvim

示例5: BST_SYS_InitBastetNvFlag

示例6: CNAS_HSM_ReadHrpdAccessAuthInfoNvim

示例7: CNAS_HSM_ReadHrpdSessionInfoExNvim

示例8: NAS_UTRANCTRL_ReadSmcCtrlFlgNvim

示例9: USIMM_VsimConfidentialDataVerifyErrHandle

示例10: Monitor_Init

示例11: STK_ProfileInit

示例12: PPM_LogFileInit

示例13: TAF_MMA_ReadAttEnsCustomNvim

示例14: TAF_MMA_ReadSystemAppCofigNvim

示例15: TAF_MMA_ReadDisplaySpnFlagNvim

示例16: SSA_GetUssdMode

示例17: NAS_UTRANCTRL_ReadUtranModeNvim

示例18: CNAS_HSM_ReadSessionKeepAliveInfoNvim

示例19: CNAS_HSM_ReadHrpdUERevInfoNvim

示例20: NAS_RABM_ReadVoicePreferNvim

请发表评论

全部评论

上一篇：

下一篇：

librespeed/speedtest: Self-hosted Speedt

avehtari/BDA_m_demos: Bayesian Data Anal

四维彩超怎么看性别？四维看男孩女孩诀窍

CVE-2022-34520

medfreeman/markdown-it-toc-and-anchor: m

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053