C++ Layout函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中Layout函数的典型用法代码示例。如果您正苦于以下问题：C++ Layout函数的具体用法？C++ Layout怎么用？C++ Layout使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了Layout函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: Create


//.........这里部分代码省略.........
  BoxSizer6->Add(35,20,0, wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL, 5);
  StaticText2 = new wxStaticText(Panel1, ID_STATICTEXT2, _("Application Folder"), wxDefaultPosition, wxDefaultSize, 0, _T("ID_STATICTEXT2"));
  wxFont StaticText2Font(10,wxFONTFAMILY_SWISS,wxFONTSTYLE_NORMAL,wxFONTWEIGHT_BOLD,false,wxEmptyString,wxFONTENCODING_DEFAULT);
  StaticText2->SetFont(StaticText2Font);
  BoxSizer6->Add(StaticText2, 1, wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL, 5);
  BoxSizer5->Add(BoxSizer6, 0, wxEXPAND|wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL, 5);
  BoxSizer7 = new wxBoxSizer(wxHORIZONTAL);
  BoxSizer7->Add(35,20,0, wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL, 5);
  StaticText1 = new wxStaticText(Panel1, ID_STATICTEXT1, _("    Please specify folder information about your application."), wxDefaultPosition, wxDefaultSize, 0, _T("ID_STATICTEXT1"));
  BoxSizer7->Add(StaticText1, 1, wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL, 5);
  BoxSizer5->Add(BoxSizer7, 0, wxEXPAND|wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL, 5);
  BoxSizer4->Add(BoxSizer5, 0, wxEXPAND|wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL, 5);
  BoxSizer4->Add(-1,-1,1, wxALL|wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL, 5);
  StaticBitmap1 = new wxStaticBitmap(Panel1, wxID_ANY, wxBitmap(LinksOben_xpm), wxDefaultPosition, wxDefaultSize, 0, _T("wxID_ANY"));
  BoxSizer4->Add(StaticBitmap1, 0, wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL, 5);
  Panel1->SetSizer(BoxSizer4);
  BoxSizer4->Fit(Panel1);
  BoxSizer4->SetSizeHints(Panel1);
  BoxSizer1->Add(Panel1, 0, wxEXPAND|wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL, 5);
  StaticLine1 = new wxStaticLine(this, ID_STATICLINE1, wxDefaultPosition, wxSize(10,-1), wxLI_HORIZONTAL, _T("ID_STATICLINE1"));
  BoxSizer1->Add(StaticLine1, 0, wxBOTTOM|wxEXPAND|wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL, 5);
  BoxSizer2 = new wxBoxSizer(wxVERTICAL);
  BoxSizer3 = new wxBoxSizer(wxHORIZONTAL);
  BoxSizer3->Add(75,20,0, wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL, 5);
  text1 = new wxStaticText(this, ID_STATICTEXT3, _("Application destination base folder:"), wxDefaultPosition, wxDefaultSize, 0, _T("ID_STATICTEXT3"));
  wxFont text1Font(8,wxFONTFAMILY_SWISS,wxFONTSTYLE_NORMAL,wxFONTWEIGHT_BOLD,false,wxEmptyString,wxFONTENCODING_DEFAULT);
  text1->SetFont(text1Font);
  BoxSizer3->Add(text1, 0, wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL, 5);
  BoxSizer3->Add(-1,-1,1, wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL, 5);
  BoxSizer2->Add(BoxSizer3, 0, wxBOTTOM|wxLEFT|wxEXPAND|wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL, 5);
  BoxSizer8 = new wxBoxSizer(wxHORIZONTAL);
  BoxSizer8->Add(75,20,0, wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL, 5);
  chProgrammFolder = new wxChoice(this, ID_CHOICE1, wxDefaultPosition, wxSize(214,21), 0, 0, 0, wxDefaultValidator, _T("ID_CHOICE1"));
  chProgrammFolder->SetSelection( chProgrammFolder->Append(_("program Files folder")) );
  chProgrammFolder->Append(_("(custom)"));
  BoxSizer8->Add(chProgrammFolder, 0, wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL, 5);
  BoxSizer8->Add(-1,-1,1, wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL, 5);
  BoxSizer2->Add(BoxSizer8, 0, wxLEFT|wxEXPAND|wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL, 5);
  BoxSizer9 = new wxBoxSizer(wxHORIZONTAL);
  BoxSizer9->Add(75,20,0, wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL, 5);
  txtCustom = new wxTextCtrl(this, ID_TEXTCTRL1, wxEmptyString, wxDefaultPosition, wxSize(217,21), 0, wxDefaultValidator, _T("ID_TEXTCTRL1"));
  txtCustom->Disable();
  BoxSizer9->Add(txtCustom, 0, wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL, 5);
  BoxSizer9->Add(-1,-1,1, wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL, 5);
  BoxSizer2->Add(BoxSizer9, 0, wxTOP|wxLEFT|wxEXPAND|wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL, 5);
  BoxSizer10 = new wxBoxSizer(wxHORIZONTAL);
  BoxSizer10->Add(75,20,0, wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL, 5);
  text2 = new wxStaticText(this, ID_STATICTEXT4, _("Application folder name:"), wxDefaultPosition, wxDefaultSize, 0, _T("ID_STATICTEXT4"));
  wxFont text2Font(8,wxFONTFAMILY_SWISS,wxFONTSTYLE_NORMAL,wxFONTWEIGHT_BOLD,false,wxEmptyString,wxFONTENCODING_DEFAULT);
  text2->SetFont(text2Font);
  BoxSizer10->Add(text2, 1, wxTOP|wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL, 5);
  BoxSizer10->Add(-1,-1,1, wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL, 5);
  BoxSizer2->Add(BoxSizer10, 0, wxTOP|wxLEFT|wxEXPAND|wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL, 5);
  BoxSizer11 = new wxBoxSizer(wxHORIZONTAL);
  BoxSizer11->Add(75,20,0, wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL, 5);
  txtAppFolderName = new wxTextCtrl(this, ID_TEXTCTRL2, wxEmptyString, wxDefaultPosition, wxSize(221,21), 0, wxDefaultValidator, _T("ID_TEXTCTRL2"));
  BoxSizer11->Add(txtAppFolderName, 0, wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL, 5);
  BoxSizer11->Add(-1,-1,1, wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL, 5);
  BoxSizer2->Add(BoxSizer11, 0, wxTOP|wxLEFT|wxEXPAND|wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL, 5);
  BoxSizer12 = new wxBoxSizer(wxHORIZONTAL);
  BoxSizer12->Add(75,20,0, wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL, 5);
  cbAppFolderName = new wxCheckBox(this, ID_CHECKBOX1, _("Allow user to change the application folder"), wxDefaultPosition, wxDefaultSize, 0, wxDefaultValidator, _T("ID_CHECKBOX1"));
  cbAppFolderName->SetValue(true);
  BoxSizer12->Add(cbAppFolderName, 0, wxALL|wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL, 5);
  BoxSizer12->Add(-1,-1,1, wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL, 5);
  BoxSizer2->Add(BoxSizer12, 0, wxTOP|wxLEFT|wxEXPAND|wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL, 5);
  BoxSizer13 = new wxBoxSizer(wxHORIZONTAL);
  BoxSizer13->Add(75,20,0, wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL, 5);
  StaticText5 = new wxStaticText(this, ID_STATICTEXT5, _("Otehr:"), wxDefaultPosition, wxDefaultSize, 0, _T("ID_STATICTEXT5"));
  BoxSizer13->Add(StaticText5, 0, wxALL|wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL, 5);
  BoxSizer13->Add(-1,-1,1, wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL, 5);
  BoxSizer2->Add(BoxSizer13, 0, wxTOP|wxLEFT|wxEXPAND|wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL, 5);
  BoxSizer14 = new wxBoxSizer(wxHORIZONTAL);
  BoxSizer14->Add(75,20,0, wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL, 5);
  cbDoesntFolder = new wxCheckBox(this, ID_CHECKBOX2, _("The application doesn\'t need a folder"), wxDefaultPosition, wxDefaultSize, 0, wxDefaultValidator, _T("ID_CHECKBOX2"));
  cbDoesntFolder->SetValue(false);
  BoxSizer14->Add(cbDoesntFolder, 0, wxALL|wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL, 5);
  BoxSizer14->Add(-1,-1,1, wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL, 5);
  BoxSizer2->Add(BoxSizer14, 0, wxTOP|wxLEFT|wxEXPAND|wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL, 5);
  BoxSizer1->Add(BoxSizer2, 0, wxEXPAND|wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL, 5);
  BoxSizer19 = new wxBoxSizer(wxHORIZONTAL);
  BoxSizer19->Add(75,20,0, wxTOP|wxBOTTOM|wxRIGHT|wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL, 5);
  StaticText7 = new wxStaticText(this, ID_STATICTEXT7, _("bold"), wxDefaultPosition, wxDefaultSize, 0, _T("ID_STATICTEXT7"));
  StaticText7->Disable();
  wxFont StaticText7Font(8,wxFONTFAMILY_SWISS,wxFONTSTYLE_NORMAL,wxFONTWEIGHT_BOLD,false,_T("Arial"),wxFONTENCODING_DEFAULT);
  StaticText7->SetFont(StaticText7Font);
  BoxSizer19->Add(StaticText7, 0, wxLEFT|wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL, 5);
  StaticText8 = new wxStaticText(this, ID_STATICTEXT8, _("= required"), wxDefaultPosition, wxDefaultSize, 0, _T("ID_STATICTEXT8"));
  StaticText8->Disable();
  BoxSizer19->Add(StaticText8, 1, wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL, 5);
  BoxSizer1->Add(BoxSizer19, 0, wxLEFT|wxEXPAND|wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL, 5);
  SetSizer(BoxSizer1);
  SetSizer(BoxSizer1);
  Layout();

  Connect(ID_CHOICE1,wxEVT_COMMAND_CHOICE_SELECTED,(wxObjectEventFunction)&ApplicationFolder::OnchProgrammFolderSelect);
  Connect(ID_CHECKBOX2,wxEVT_COMMAND_CHECKBOX_CLICKED,(wxObjectEventFunction)&ApplicationFolder::OncbDoesntFolderClick);
  //*)
  SetSize( wxSize(480,320));
}

开发者ID:zinnjonas，项目名称:cbInno，代码行数:101，代码来源:ApplicationFolder.cpp

示例2: wxBoxSizer

void WMain_wxg::do_layout()
{
    // begin wxGlade: WMain_wxg::do_layout
    wxBoxSizer* sizer_4 = new wxBoxSizer(wxVERTICAL);
    wxBoxSizer* sizer_1 = new wxBoxSizer(wxVERTICAL);
    wxStaticBoxSizer* sizer_10 = new wxStaticBoxSizer(sizer_10_staticbox, wxVERTICAL);
    wxBoxSizer* sizer_2 = new wxBoxSizer(wxVERTICAL);
    wxStaticBoxSizer* sizer_9 = new wxStaticBoxSizer(sizer_9_staticbox, wxVERTICAL);
    wxFlexGridSizer* grid_sizer_3 = new wxFlexGridSizer(1, 7, 0, 0);
    wxBoxSizer* sizer_7 = new wxBoxSizer(wxHORIZONTAL);
    wxStaticBoxSizer* sizer_8 = new wxStaticBoxSizer(sizer_8_staticbox, wxVERTICAL);
    wxFlexGridSizer* grid_sizer_2 = new wxFlexGridSizer(3, 2, 0, 0);
    wxStaticBoxSizer* sizer_3 = new wxStaticBoxSizer(sizer_3_staticbox, wxVERTICAL);
    wxFlexGridSizer* grid_sizer_1 = new wxFlexGridSizer(3, 2, 0, 0);
    wxStaticText* label_1 = new wxStaticText(panel_Main, wxID_ANY, wxT("Data Type"));
    grid_sizer_1->Add(label_1, 0, wxALL|wxALIGN_RIGHT|wxALIGN_CENTER_VERTICAL, 4);
    grid_sizer_1->Add(choice_DataType, 0, wxALL|wxALIGN_CENTER_VERTICAL|wxSHAPED, 4);
    wxStaticText* label_3 = new wxStaticText(panel_Main, wxID_ANY, wxT("Node Slots"));
    grid_sizer_1->Add(label_3, 0, wxALL|wxALIGN_RIGHT|wxALIGN_CENTER_VERTICAL, 4);
    grid_sizer_1->Add(choice_NodeSlots, 0, wxALL|wxALIGN_CENTER_VERTICAL|wxSHAPED, 4);
    grid_sizer_1->Add(2, 2, 0, wxADJUST_MINSIZE, 0);
    grid_sizer_1->Add(checkbox_Duplicates, 0, wxALL, 4);
    grid_sizer_1->AddGrowableCol(0);
    grid_sizer_1->AddGrowableCol(1);
    sizer_3->Add(grid_sizer_1, 1, wxEXPAND, 0);
    sizer_7->Add(sizer_3, 1, wxALL|wxEXPAND, 6);
    sizer_8->Add(1, 1, 1, wxADJUST_MINSIZE, 0);
    wxStaticText* label_5 = new wxStaticText(panel_Main, wxID_ANY, wxT("Key"));
    grid_sizer_2->Add(label_5, 0, wxALL|wxALIGN_RIGHT|wxALIGN_CENTER_VERTICAL, 4);
    grid_sizer_2->Add(textctrl_Key, 0, wxALL|wxEXPAND, 4);
    wxStaticText* label_6 = new wxStaticText(panel_Main, wxID_ANY, wxT("Data"));
    grid_sizer_2->Add(label_6, 0, wxALL|wxALIGN_RIGHT|wxALIGN_CENTER_VERTICAL, 4);
    grid_sizer_2->Add(textctrl_Data, 1, wxALL|wxEXPAND, 4);
    grid_sizer_2->AddGrowableCol(1);
    sizer_8->Add(grid_sizer_2, 0, wxEXPAND, 0);
    sizer_8->Add(1, 1, 1, wxADJUST_MINSIZE, 0);
    sizer_7->Add(sizer_8, 1, wxRIGHT|wxTOP|wxBOTTOM|wxEXPAND, 6);
    sizer_2->Add(sizer_7, 0, wxEXPAND, 0);
    grid_sizer_3->Add(button_Insert, 0, wxLEFT|wxTOP|wxBOTTOM|wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL, 4);
    grid_sizer_3->Add(button_Erase, 0, wxLEFT|wxTOP|wxBOTTOM|wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL, 4);
    grid_sizer_3->Add(button_InsertRandom, 0, wxLEFT|wxTOP|wxBOTTOM|wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL, 4);
    grid_sizer_3->Add(button_FindKey, 0, wxLEFT|wxTOP|wxBOTTOM|wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL, 4);
    grid_sizer_3->Add(button_EqualRange, 0, wxLEFT|wxTOP|wxBOTTOM|wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL, 4);
    grid_sizer_3->Add(button_Clear, 0, wxLEFT|wxTOP|wxBOTTOM|wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL, 4);
    grid_sizer_3->Add(button_LoadFile, 0, wxALL, 4);
    grid_sizer_3->AddGrowableCol(0);
    grid_sizer_3->AddGrowableCol(1);
    grid_sizer_3->AddGrowableCol(2);
    grid_sizer_3->AddGrowableCol(3);
    grid_sizer_3->AddGrowableCol(4);
    grid_sizer_3->AddGrowableCol(5);
    sizer_9->Add(grid_sizer_3, 0, wxEXPAND, 0);
    sizer_9->Add(textctrl_OpResult, 0, wxALL|wxEXPAND, 4);
    sizer_2->Add(sizer_9, 0, wxLEFT|wxRIGHT|wxBOTTOM|wxEXPAND, 6);
    sizer_1->Add(sizer_2, 0, wxEXPAND, 0);
    sizer_10->Add(window_TreeDrawing, 1, wxALL|wxEXPAND, 2);
    sizer_1->Add(sizer_10, 1, wxLEFT|wxRIGHT|wxBOTTOM|wxEXPAND, 6);
    panel_Main->SetSizer(sizer_1);
    sizer_4->Add(panel_Main, 1, wxEXPAND, 0);
    SetSizer(sizer_4);
    sizer_4->Fit(this);
    Layout();
    Centre();
    // end wxGlade
}

开发者ID:bingmann，项目名称:bingmann.github.io，代码行数:65，代码来源:WMain_wxg.cpp

示例3: CalculateMinSize

bool wxRibbonGallery::Realize()
{
    CalculateMinSize();
    return Layout();
}

开发者ID:BloodRedd，项目名称:gamekit，代码行数:5，代码来源:gallery.cpp

示例4: wxScrolledWindow


//.........这里部分代码省略.........

    m_editor_box_sizer = new wxStaticBoxSizer( m_editor_box, wxVERTICAL );

    m_editor_box_sizer->Add( m_editor_loc_sizer, 0, wxEXPAND | wxALL, 2 );
////////
    wxStaticBoxSizer* m_autojoin_sizer= new wxStaticBoxSizer ( wxVERTICAL, this, _("Autoconnect") );
    m_autoconnect_label = new wxStaticText ( this, -1, _("If checked, SpringLobby will automatically log on to the last used server") );
    m_autojoin = new wxCheckBox( this, -1, _("Autoconnect on lobby start"), wxDefaultPosition, wxDefaultSize, 0 );
    m_autojoin->SetValue( sett().GetAutoConnect() );
    m_autojoin_sizer->Add( m_autoconnect_label, 1, wxEXPAND | wxALL, 5 );
    m_autojoin_sizer->Add( m_autojoin, 0, wxEXPAND | wxALL, 5 );

    wxStaticBoxSizer* m_reportstats_sizer = new wxStaticBoxSizer ( wxVERTICAL, this, _("Report statistics") );
    m_reportstats_label = new wxStaticText ( this, -1, _("By default SpringLobby will send some statistics (OS,SpringLobby version) to server,\nto both make helping you in case of problems easier and inform of critical updates.\nUncheck to disable.") );
    m_reportstats = new wxCheckBox( this, -1, _("report statistics"), wxDefaultPosition, wxDefaultSize, 0 );
    m_reportstats->SetValue( sett().GetReportStats() );
    m_reportstats_sizer->Add( m_reportstats_label, 1, wxEXPAND|wxALL, 5);
    m_reportstats_sizer->Add( m_reportstats, 0, wxEXPAND|wxALL, 5);

    m_main_sizer->Add( m_web_box_sizer, 0, wxEXPAND | wxALL, 5 );
    m_main_sizer->Add( m_editor_box_sizer, 0, wxEXPAND | wxALL, 5 );
    m_main_sizer->Add( m_autojoin_sizer, 0, wxALL, 5 );
    m_main_sizer->Add( m_reportstats_sizer, 0, wxALL, 5 );

#ifdef __WXMSW__
    wxStaticBoxSizer* m_updater_sizer = new wxStaticBoxSizer ( wxVERTICAL, this, _("Automatic updates") );
    m_updater_label = new wxStaticText ( this, -1, _("SpringLobby can check at startup if a newer version is available and automatically download it for you.") );
    m_updater = new wxCheckBox( this, -1, _("automatically check for updates"), wxDefaultPosition, wxDefaultSize, 0 );
    m_updater->SetValue( sett().GetAutoUpdate() );
    m_updater_sizer->Add( m_updater_label, 1, wxEXPAND|wxALL, 5);
    m_updater_sizer->Add( m_updater, 0, wxEXPAND|wxALL, 5);

    m_main_sizer->Add( m_updater_sizer, 0, wxALL, 5 );
#endif

    wxStaticBoxSizer* m_show_tooltips_sizer = new wxStaticBoxSizer ( wxVERTICAL, this, _("Tooltips") );
    m_show_tooltips = new wxCheckBox( this, -1, _("Show Tooltips?"), wxDefaultPosition, wxDefaultSize, 0 );
    m_show_tooltips->SetValue( sett().GetShowTooltips() );
#ifndef __WXMSW__ // on windows this change is immediate
    m_show_tooltips_label = new wxStaticText ( this, -1, _("Requires SpringLobby restart to take effect.") );
    m_show_tooltips_sizer->Add( m_show_tooltips_label, 1, wxEXPAND|wxALL, 5);
#endif
    m_show_tooltips_sizer->Add( m_show_tooltips, 0, wxEXPAND|wxALL, 5);

    m_main_sizer->Add( m_show_tooltips_sizer, 0, wxALL, 5 );

    wxStaticBoxSizer* m_complete_method_sizer = new wxStaticBoxSizer ( wxVERTICAL, this, _("Tab completion method") );
    m_complete_method_label = new wxStaticText ( this, -1, _("\"Match exact\" will complete a word if there is one and only one match.\n"
        "\"Match nearest\" will select the (first) match that has closest Levenshtein distance") );
    m_complete_method_old = new wxRadioButton( this, -1, _("Match exact"), wxDefaultPosition, wxDefaultSize, wxRB_GROUP );
    m_complete_method_new = new wxRadioButton( this, -1, _("Match nearest"), wxDefaultPosition, wxDefaultSize );
    m_complete_method_old->SetValue( sett().GetCompletionMethod() == Settings::MatchExact );
    m_complete_method_new->SetValue( sett().GetCompletionMethod() == Settings::MatchNearest );
    m_complete_method_sizer->Add( m_complete_method_label, 1, wxEXPAND|wxALL, 5);
    m_complete_method_sizer->Add( m_complete_method_old, 0, wxEXPAND|wxALL, 5);
    m_complete_method_sizer->Add( m_complete_method_new, 0, wxEXPAND|wxALL, 5);

    m_main_sizer->Add( m_complete_method_sizer, 0, wxALL, 5 );

    wxStaticBoxSizer* m_misc_gui_sizer = new wxStaticBoxSizer ( wxVERTICAL, this, _("Misc GUI") );
    m_use_tabicons = new wxCheckBox( this, -1, _("Show big icons in mainwindow tabs?"), wxDefaultPosition, wxDefaultSize, 0 );
    m_use_tabicons->SetValue( sett().GetUseTabIcons() );
    m_misc_gui_sizer->Add( m_use_tabicons , 0, wxEXPAND | wxALL, 5 );
	m_use_notif_popups = new wxCheckBox( this, -1, _("Use notification popups?"), wxDefaultPosition, wxDefaultSize, 0 );
	m_misc_gui_sizer->Add( m_use_notif_popups, 0, wxEXPAND | wxALL, 5 );
	m_notif_popup_pos_sizer = new wxBoxSizer( wxHORIZONTAL );
	m_notif_popup_pos_label = new wxStaticText( this, -1, _("Screen position for notification popups") );
	m_notif_popup_pos = new wxChoice( this, -1,  wxDefaultPosition, wxDefaultSize, ScreenPosition() );
	m_notif_popup_pos_sizer->Add( m_notif_popup_pos_label, 0, wxALL| wxALIGN_CENTER_VERTICAL, 5 );
	m_notif_popup_pos_sizer->Add( m_notif_popup_pos, 0, wxALL| wxALIGN_CENTER_VERTICAL, 5 );
	m_misc_gui_sizer->Add( m_notif_popup_pos_sizer, 0, wxEXPAND | wxALL, 0 );
	m_notif_popup_time_sizer  = new wxBoxSizer( wxHORIZONTAL );
	m_notif_popup_time = new wxSpinCtrl( this, wxID_ANY );
	m_notif_popup_time_label = new wxStaticText( this, -1, _("Display time for popup notifications in seconds") );
	m_notif_popup_time_sizer->Add( m_notif_popup_time_label, 0, wxALL| wxALIGN_CENTER_VERTICAL, 5 );
	m_notif_popup_time_sizer->Add( m_notif_popup_time, 0, wxALL| wxALIGN_CENTER_VERTICAL, 5 );
	m_misc_gui_sizer->Add( m_notif_popup_time_sizer, 0, wxEXPAND | wxALL, 0 );


    m_x_on_all_tabs = new wxCheckBox( this, -1, _("Show close button on all tabs? (needs restart to take effect)"), wxDefaultPosition, wxDefaultSize, 0 );
    m_x_on_all_tabs->SetValue( sett().GetShowXallTabs() );
    m_misc_gui_sizer->Add( m_x_on_all_tabs , 1, wxEXPAND | wxALL, 5 );
    m_main_sizer->Add( m_misc_gui_sizer , 0, wxALL, 5 );

    wxStaticBoxSizer* m_start_tab_sizer = new wxStaticBoxSizer ( wxHORIZONTAL, this, _("Start tab") );
    m_start_tab = new wxChoice( this, -1,  wxDefaultPosition, wxDefaultSize, MainWindow::GetTabNames() );
    m_start_tab->SetSelection( sett().GetStartTab() );
    wxStaticText* m_start_tab_label = new wxStaticText ( this, -1, _("Select which tab to show at startup") );
    m_start_tab_sizer->Add( m_start_tab_label  , 0, wxALIGN_CENTER_VERTICAL | wxEXPAND | wxALL, 5 );
    m_start_tab_sizer->Add( m_start_tab , 0,  wxALIGN_CENTER_VERTICAL , 5 );
    m_main_sizer->Add( m_start_tab_sizer, 0, wxALL, 5 );

	//dummy event that updates controls to correct state
	wxCommandEvent evt;
	OnRestore( evt );

    SetScrollRate( SCROLL_RATE, SCROLL_RATE );
    SetSizer( m_main_sizer );
    Layout();
}

开发者ID:tvo，项目名称:springlobby，代码行数:101，代码来源:lobbyoptionstab.cpp

示例5: gcFrame


//.........这里部分代码省略.........
	fgSizerAltLogin->Add(15, 0, 1, wxEXPAND, 5);
	fgSizerAltLogin->Add(m_butTwitter, 0, 0, 5);
	fgSizerAltLogin->Add(0, 0, 1, wxEXPAND, 5);
	fgSizerAltLogin->Add(m_butSteam, 0, 0, 5);
	fgSizerAltLogin->Add(0, 0, 1, wxEXPAND, 5);
	fgSizerAltLogin->Add(m_butFacebook, 0, 0, 5);
	fgSizerAltLogin->Add(0, 0, 1, wxEXPAND, 5);
	fgSizerAltLogin->Add(m_butGoogle, 0, 0, 5);
	fgSizerAltLogin->Add(15, 0, 1, wxEXPAND, 5);

	wxFlexGridSizer* fgSizer2 = new wxFlexGridSizer( 6, 1, 0, 0 );
	fgSizer2->SetFlexibleDirection( wxBOTH );
	fgSizer2->SetNonFlexibleGrowMode( wxFLEX_GROWMODE_SPECIFIED );
	fgSizer2->Add( m_imgLogo, 1, wxTOP|wxBOTTOM|wxALIGN_CENTER_HORIZONTAL, 5 );
	fgSizer2->Add( fgSizer3, 1, wxEXPAND, 5 );
	fgSizer2->Add(0, 9, 1, wxEXPAND, 5);
	fgSizer2->Add(fgSizer5, 1, wxEXPAND, 5);
	fgSizer2->Add(0, 9, 1, wxEXPAND, 5);
	fgSizer2->Add(fgSizerAltLogin, 1, wxEXPAND, 5);



	wxFlexGridSizer* fgSizer1 = new wxFlexGridSizer( 1, 3, 0, 0 );
	fgSizer1->AddGrowableCol( 0 );
	fgSizer1->AddGrowableCol( 2 );
	fgSizer1->AddGrowableRow( 0 );
	fgSizer1->SetFlexibleDirection( wxBOTH );
	fgSizer1->SetNonFlexibleGrowMode( wxFLEX_GROWMODE_SPECIFIED );
	fgSizer1->Add( 0, 0, 1, wxEXPAND, 5 );
	fgSizer1->Add( fgSizer2, 1, wxEXPAND, 5 );
	fgSizer1->Add( 0, 15, 1, wxEXPAND|wxBOTTOM, 15 );

	this->SetSizer( fgSizer1 );
	this->Layout();


	m_bSavePos = false;

	m_vTabOrder.push_back(m_tbUsername);
	m_vTabOrder.push_back(m_tbPasswordDisp);
	m_vTabOrder.push_back(m_tbPassword);
	m_vTabOrder.push_back(m_cbRemPass);
	m_vTabOrder.push_back(m_butSignin);
	m_vTabOrder.push_back(m_butCancel);
	m_vTabOrder.push_back(m_linkOffline);
	m_vTabOrder.push_back(m_linkNewAccount);
	m_vTabOrder.push_back(m_linkLostPassword);

	Centre(wxCENTRE_ON_SCREEN);
	SetFocus();

	if (gc_login_x.getInt() == -1 || gc_login_y.getInt() == -1)
	{
		int x = wxSystemSettings::GetMetric(wxSYS_SCREEN_X);
		int y = wxSystemSettings::GetMetric(wxSYS_SCREEN_Y);

		int w=0;
		int h=0;
		GetSize(&w, &h);

		int newX = (x-w)/2;
		int newY = (y-h)/2;

		if (newX>0 && newY>0)
			SetSize(newX, newY, -1, -1);
	}

开发者ID:Mailaender，项目名称:desura-app，代码行数:67，代码来源:LoginForm.cpp

示例6: m_battle

SingleOptionDialog::SingleOptionDialog( IBattle& battle, const wxString& optiontag )
    : m_battle( battle ),
    m_tag( optiontag ),
    m_checkbox( 0 ),
    m_combobox( 0 ),
    m_spinctrl( 0 ),
    m_textctrl( 0 )
{
	OptionsWrapper& optWrap = m_battle.CustomBattleOptions();
	OptionsWrapper::GameOption optFlag = ( OptionsWrapper::GameOption )s2l( optiontag.BeforeFirst( '_' ) );
	wxString key = optiontag.AfterFirst( '_' );
	OptionType type = optWrap.GetSingleOptionType( key );
	Create( (wxWindow*)&ui().mw(), wxID_ANY, _( "Change option" ), wxDefaultPosition, wxDefaultSize, wxDEFAULT_DIALOG_STYLE, _T( "OptionDialog" ) );
	if ( !optWrap.keyExists( key, optFlag, false, type ) )
	{
		EndModal( wxID_CANCEL );
		return;
	}

	wxBoxSizer* m_main_sizer = new wxBoxSizer( wxVERTICAL );

	// wxStaticText* m_labelctrl = wxStaticText();

	switch ( type )
	{
		case opt_bool:
			{
				mmOptionBool opt = optWrap.m_opts[optFlag].bool_map[key];
				m_checkbox = new wxCheckBox( this, wxID_ANY, opt.name );
				m_checkbox->SetToolTip( TE( opt.description ) );
				m_checkbox->SetValue( opt.value );
				m_main_sizer->Add( m_checkbox, 0, wxEXPAND );
				break;
			}
		case opt_float:
			{
				mmOptionFloat opt = optWrap.m_opts[optFlag].float_map[key];
				m_spinctrl = new SlSpinCtrlDouble<SingleOptionDialog>();
				m_spinctrl->Create( this, wxID_ANY, _T( "" ), wxDefaultPosition, wxDefaultSize, wxSP_ARROW_KEYS, double( opt.min ), double( opt.max ), double( opt.value ), double( opt.stepping ), opt.key );
				m_spinctrl->SetToolTip( TE( opt.description ) );
				m_main_sizer->Add( m_spinctrl, 0, wxEXPAND );
				break;
			}
		case opt_string:
			{
				mmOptionString opt = optWrap.m_opts[optFlag].string_map[key];
				m_textctrl = new wxTextCtrl( this, wxID_ANY, opt.value, wxDefaultPosition, wxDefaultSize, 0, wxDefaultValidator, opt.key );
				m_textctrl->SetToolTip( TE( opt.description ) );
				m_main_sizer->Add( m_textctrl, 0, wxEXPAND );
				break;
			}
		case opt_list:
			{
				mmOptionList opt = optWrap.m_opts[optFlag].list_map[key];
				int temp = int( opt.cbx_choices.GetCount() - 1 );
				int index = clamp( opt.cur_choice_index, 0, temp );
				m_combobox = new wxComboBox( this, wxID_ANY, opt.cbx_choices[index], wxDefaultPosition, wxDefaultSize, opt.cbx_choices, wxCB_READONLY, wxDefaultValidator );
				wxString tooltip = opt.description + _T( "\n" );
				for ( ListItemVec::iterator itor = opt.listitems.begin(); itor != opt.listitems.end(); itor++ )
				{
					tooltip += _T( "\n" ) + itor->name + _T( ": " ) + itor->desc;
				}
				m_combobox->SetToolTip( TE( tooltip ) );
				m_main_sizer->Add( m_combobox, 0, wxEXPAND );
				break;
			}
		default:
			{
				EndModal( wxID_CANCEL );
				return;
				break;
			}
	}

	wxSize __SpacerSize_1 = wxDLG_UNIT( this, wxSize( 0, 0 ) );
	m_main_sizer->Add( __SpacerSize_1.GetWidth(), __SpacerSize_1.GetHeight(), 0, wxALL | wxALIGN_CENTER_HORIZONTAL | wxALIGN_CENTER_VERTICAL, 5 );
	wxStaticLine* m_separator1 = new wxStaticLine( this, wxID_ANY, wxDefaultPosition, wxSize( 10, -1 ), wxLI_HORIZONTAL, _T( "ID_STATICLINE1" ) );
	m_main_sizer->Add( m_separator1, 0, wxALL | wxEXPAND | wxALIGN_CENTER_HORIZONTAL | wxALIGN_CENTER_VERTICAL, 5 );
	wxBoxSizer* m_buttons_sizer = new wxBoxSizer( wxHORIZONTAL );
	m_cancel_button = new wxButton( this, ID_CANCEL, _( "Cancel" ), wxDefaultPosition, wxDefaultSize, 0, wxDefaultValidator, _T( "ID_CANCEL" ) );
	m_buttons_sizer->Add( m_cancel_button, 0, wxALL | wxALIGN_LEFT | wxALIGN_CENTER_VERTICAL, 5 );
	m_buttons_sizer->Add( 0, 0, 1, wxALL | wxEXPAND | wxSHAPED | wxALIGN_CENTER_HORIZONTAL | wxALIGN_CENTER_VERTICAL, 0 );
	m_ok_button = new wxButton( this, ID_OK, _( "Ok" ), wxDefaultPosition, wxDefaultSize, 0, wxDefaultValidator, _T( "ID_OK" ) );
	m_buttons_sizer->Add( m_ok_button, 0, wxALL | wxALIGN_RIGHT | wxALIGN_CENTER_VERTICAL, 5 );
	m_main_sizer->Add( m_buttons_sizer, 0, wxALL | wxEXPAND | wxALIGN_CENTER_HORIZONTAL | wxALIGN_CENTER_VERTICAL, 0 );


	m_main_sizer->Fit( this );
	m_main_sizer->SetSizeHints( this );

	SetSizer( m_main_sizer );
	Layout();

	Connect( ID_CANCEL, wxEVT_COMMAND_BUTTON_CLICKED, ( wxObjectEventFunction )&SingleOptionDialog::OnCancel );
	Connect( ID_OK, wxEVT_COMMAND_BUTTON_CLICKED, ( wxObjectEventFunction )&SingleOptionDialog::OnOk );
}

开发者ID:tvo，项目名称:springlobby，代码行数:96，代码来源:mmoptionwindows.cpp

示例7: wxWizardPageSimple

CPageAuto::CPageAuto(
  CDialogExportSetup *parent, 
  wxWizardPageSimple *prev, 
  CXSLExportFileType *pExportEdit,
  bool bReadOnly) :
    wxWizardPageSimple(parent,prev,NULL),
    m_pExportEdit(pExportEdit),
    m_pCheckActive(NULL),
    m_pCheckAppendDate(NULL),
    m_pComboLocation(NULL),
    m_pComboFileName(NULL),
    m_pComboFileExt(NULL),
    m_pTextLocation(NULL),
    m_pTextFileName(NULL),
    m_pTextFileExt(NULL),
    m_pButtonBrowse(NULL),
    m_bReadOnly(bReadOnly)
{

  // m_pCheckActive

  prev->SetNext(this);
  m_pCheckActive = new wxCheckBox(
    this,wxID_ANY,_T("Create export file after each analysis"));

  // m_pComboLocation

  wxStaticText *pTextLocation = new wxStaticText(
    this,wxID_ANY,_T("Location"));

  wxWindow *pWinLocation = _CreateLocationWindow();
  wxBoxSizer *pSizerLocation = new wxBoxSizer(wxHORIZONTAL);
  if(!m_bReadOnly)
  {
    m_pButtonBrowse = new wxButton(
      this,IDbrowseOutput,_T("Browse..."),
      wxDefaultPosition, wxDefaultSize,
      wxBU_EXACTFIT);
    pSizerLocation->Add(pWinLocation,1,wxEXPAND | wxRIGHT , ID_BORDER);
    pSizerLocation->Add(m_pButtonBrowse,0,wxALIGN_CENTER_VERTICAL,0);
  }
  else
  {
    pSizerLocation->Add(pWinLocation,1,wxEXPAND,0);
  }
  // m_pComboFileName

  wxArrayString as;
  if(!m_bReadOnly)
  {
    as.Alloc(1);
    as.Add(ANALYSIS_FILE_NAME);
  }

  wxStaticText *pTextFileName = new wxStaticText(
    this,wxID_ANY,_T("File name"));
  wxWindow *pWinFileName = _CreateFileNameWindow(as);
  m_pCheckAppendDate = new wxCheckBox(
    this,wxID_ANY,_T("Append date to file name"));

  // m_pComboFileExt

  wxStaticText *pTextExt = new wxStaticText(
    this,wxID_ANY,_T("File extension"));
  wxWindow *pWinFileExt = _CreateFileExtWindow();

  // layout

  wxBoxSizer *pSizerAll = new wxBoxSizer(wxVERTICAL);
  wxFlexGridSizer *pGridSizer = new wxFlexGridSizer(3,2,ID_BORDER,ID_BORDER);
  wxBoxSizer *pSizerFileName = new wxBoxSizer(wxVERTICAL);
  pGridSizer->SetFlexibleDirection(wxBOTH);
  pGridSizer->AddGrowableCol(1,1);
  pGridSizer->Add(pTextLocation,0,
    wxALIGN_LEFT | wxALIGN_CENTRE_VERTICAL);
  pGridSizer->Add(pSizerLocation,1,
    wxEXPAND | wxALIGN_CENTRE_VERTICAL | wxEXPAND);
  pGridSizer->Add(pTextFileName,0,
    wxALIGN_LEFT | wxALIGN_CENTRE_VERTICAL);
  pSizerFileName->Add(pWinFileName,0,wxALIGN_LEFT | wxEXPAND,0);
  pSizerFileName->Add(m_pCheckAppendDate,0,wxTOP | wxALIGN_LEFT,1);
  pGridSizer->Add(pSizerFileName,1,
    wxEXPAND | wxALIGN_CENTRE_VERTICAL | wxEXPAND);
  pGridSizer->Add(pTextExt,0,
    wxALIGN_LEFT | wxALIGN_CENTRE_VERTICAL);
  pGridSizer->Add(pWinFileExt,1,
    wxEXPAND | wxALIGN_CENTRE_VERTICAL | wxEXPAND,0);
  pSizerAll->Add(m_pCheckActive,0, wxALIGN_LEFT | wxBOTTOM, ID_BORDER);
  pSizerAll->Add(pGridSizer, 0, wxEXPAND);
  pSizerAll->AddStretchSpacer(1);
  SetSizer(pSizerAll);
  Layout();
}

开发者ID:ForensicBioinformatics，项目名称:osiris，代码行数:93，代码来源:CPageAuto.cpp

示例8: wxDialog


//.........这里部分代码省略.........
   // Create the main sizer
   wxBoxSizer *vs = new wxBoxSizer(wxVERTICAL);

   // A little instruction
   vs->Add(new wxStaticText(this,
                            wxID_ANY,
                            _("Press F2 or double click to edit cell contents.")),
                            0,
                            wxALIGN_LEFT | wxALL,
                            5);

   // Create the main sizer
   mGrid = new Grid(this, wxID_ANY);
   vs->Add(mGrid, 1, wxEXPAND | wxALL, 5);

   // Create the action buttons
   wxBoxSizer *hs = new wxBoxSizer(wxHORIZONTAL);
   hs->Add(new wxButton(this, ID_INSERTA, _("Insert &After")), 1, wxCENTER | wxALL, 5);
   hs->Add(new wxButton(this, ID_INSERTB, _("Insert &Before")), 1, wxCENTER | wxALL, 5);
   hs->Add(new wxButton(this, ID_REMOVE,  _("&Remove")), 1, wxCENTER | wxALL, 5);
   hs->Add(new wxButton(this, ID_IMPORT,  _("&Import...")), 1, wxCENTER | wxALL, 5);
   hs->Add(new wxButton(this, ID_EXPORT,  _("&Export...")), 1, wxCENTER | wxALL, 5);
   vs->Add(hs, 0, wxEXPAND | wxCENTER | wxALL, 5);

   // Create the exit buttons
   vs->Add(CreateStdButtonSizer(this, eCancelButton|eOkButton), 0, wxEXPAND);

   // Make it so
   SetSizer(vs);

   // Build the initial (empty) grid
   mGrid->CreateGrid(0, Col_Max);
   mGrid->SetDefaultCellAlignment(wxALIGN_LEFT, wxALIGN_CENTER);

   int i;
   for (i = 0; i < Col_Max; i++) {
      mGrid->SetColLabelValue(i, headers[i]);
   }

   // Create and remember editors.  No need to delete these as the wxGrid will
   // do it for us.
   mChoiceEditor = (ChoiceEditor *) mGrid->GetDefaultEditorForType(GRID_VALUE_CHOICE);
   mTimeEditor = (TimeEditor *) mGrid->GetDefaultEditorForType(GRID_VALUE_TIME);

   // Initialize and set the track name column attributes
   wxGridCellAttr *attr = new wxGridCellAttr();
   attr->SetEditor(mChoiceEditor);
   mGrid->SetColAttr(Col_Track, attr);
   mTrackNames.Add(_("New..."));

   // Initialize and set the time column attributes
   attr = new wxGridCellAttr();
   attr->SetRenderer(mGrid->GetDefaultRendererForType(GRID_VALUE_TIME));
   attr->SetEditor(mTimeEditor);
   attr->SetAlignment(wxALIGN_CENTER, wxALIGN_CENTER);
   mGrid->SetColAttr(Col_Stime, attr);
   mGrid->SetColAttr(Col_Etime, attr->Clone());

   // Seems there's a bug in wxGrid.  Adding only 1 row does not
   // allow SetCellSize() to work properly and you will not get
   // the expected 1 row by 4 column cell.
   //
   // So, we set the minimum row height to 0 and basically hide
   // the extra row by setting its height to 0.  And not allowing the
   // rows to be manually resized prevents the user from ever seeing
   // the extra row.
   mGrid->SetRowMinimalAcceptableHeight(0);
   mGrid->EnableDragRowSize(false);

   // Locate all labels in current track list
   FindAllLabels();

   // Populate the grid
   TransferDataToWindow();

   // Resize the label name column and ensure it doesn't go below an
   // arbitrary width.
   //
   // This should not be in TransferDataToWindow() since a user might
   // resize the column and we'd resize it back to the minimum.
   mGrid->AutoSizeColumn(Col_Label, false );
   mGrid->SetColSize(Col_Label, wxMax(150, mGrid->GetColSize(Col_Label)));
   mGrid->SetColMinimalWidth(Col_Label, mGrid->GetColSize(Col_Label));

   // Layout the works
   Layout();

   // Resize width based on width of columns and the vertical scrollbar
   wxRect r = mGrid->GetGridColLabelWindow()->GetRect();
   wxScrollBar sb(this, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxSB_VERTICAL);
   r.width += sb.GetSize().GetWidth() + 6;
   SetClientSize(r.width, 300);

   // Make sure it doesn't go below this size
   r = GetRect();
   SetSizeHints(r.GetWidth(), r.GetHeight());

   // Center on display
   Center();
}

开发者ID:ruthmagnus，项目名称:audacity，代码行数:101，代码来源:LabelDialog.cpp

示例9: Layout

menu_layout
TExpandoMenuBar::MenuLayout() const
{
	return Layout();
}

开发者ID:michael-manley，项目名称:haiku，代码行数:5，代码来源:ExpandoMenuBar.cpp

示例10: PromptDlgPassword


//.........这里部分代码省略.........
                                    -1,
                                    _("Authentication Required"),
                                    wxDefaultPosition,
                                    wxSize(400, 200),
                                    wxDEFAULT_DIALOG_STYLE |
                                    wxCENTER)
    {
        // create the username sizer
        
        wxStaticText* label_username = new wxStaticText(this,
                                                        -1,
                                                        _("User Name:"),
                                                        wxDefaultPosition,
                                                        wxDefaultSize);
        m_username_ctrl = new wxTextCtrl(this, ID_UsernameTextCtrl, m_username);
        
        wxBoxSizer* username_sizer = new wxBoxSizer(wxHORIZONTAL);
        username_sizer->Add(label_username, 0, wxALIGN_CENTER);
        username_sizer->Add(m_username_ctrl, 1, wxEXPAND);
        
        
        // create the password sizer
        
        wxStaticText* label_password = new wxStaticText(this,
                                                        -1,
                                                        _("Password:"),
                                                        wxDefaultPosition,
                                                        wxDefaultSize);
        m_password_ctrl = new wxTextCtrl(this,
                                         ID_PasswordTextCtrl,
                                         wxEmptyString,
                                         wxDefaultPosition,
                                         wxDefaultSize,
                                         wxTE_PASSWORD);
        
        wxBoxSizer* password_sizer = new wxBoxSizer(wxHORIZONTAL);
        password_sizer->Add(label_password, 0, wxALIGN_CENTER);
        password_sizer->Add(m_password_ctrl, 1, wxEXPAND);


        // create a platform standards-compliant OK/Cancel sizer
        
        wxButton* ok_button = new wxButton(this, wxID_OK);
        wxButton* cancel_button = new wxButton(this, wxID_CANCEL);
        
        wxStdDialogButtonSizer* ok_cancel_sizer = new wxStdDialogButtonSizer;
        ok_cancel_sizer->AddButton(ok_button);
        ok_cancel_sizer->AddButton(cancel_button);
        ok_cancel_sizer->Realize();
        ok_cancel_sizer->AddSpacer(5);
        
        ok_button->SetDefault();
        
        // this code is necessary to get the sizer's bottom margin to 8
        wxSize min_size = ok_cancel_sizer->GetMinSize();
        min_size.SetHeight(min_size.GetHeight()+16);
        ok_cancel_sizer->SetMinSize(min_size);
        
        
        // code to allow us to line up the static text elements
        wxSize s1 = label_username->GetSize();
        wxSize s2 = label_password->GetSize();
        wxSize max_size = wxSize(wxMax(s1.x, s2.x), wxMax(s1.y, s2.y));
        max_size.x += 10;
        username_sizer->SetItemMinSize(label_username, max_size);
        password_sizer->SetItemMinSize(label_password, max_size);


        // create username/password sizer
        
        wxBitmap bmp = wxArtProvider::GetBitmap(wxART_QUESTION, wxART_MESSAGE_BOX);
        wxStaticBitmap* bitmap_question = new wxStaticBitmap(this, -1, bmp);
        m_message_ctrl = new wxStaticText(this, -1, m_message);
        
        wxBoxSizer* vert_sizer = new wxBoxSizer(wxVERTICAL);
        vert_sizer->Add(m_message_ctrl, 0, wxEXPAND);
        vert_sizer->AddSpacer(16);
        vert_sizer->Add(username_sizer, 0, wxEXPAND);
        vert_sizer->AddSpacer(8);
        vert_sizer->Add(password_sizer, 0, wxEXPAND);
        
        // create top sizer
        
        wxBoxSizer* top_sizer = new wxBoxSizer(wxHORIZONTAL);
        top_sizer->AddSpacer(7);
        top_sizer->Add(bitmap_question, 0, wxTOP, 7);
        top_sizer->AddSpacer(15);
        top_sizer->Add(vert_sizer, 1, wxEXPAND | wxTOP, 7);

        // create main sizer
        
        wxBoxSizer* main_sizer = new wxBoxSizer(wxVERTICAL);
        main_sizer->AddSpacer(8);
        main_sizer->Add(top_sizer, 0, wxEXPAND | wxLEFT | wxRIGHT, 8);
        main_sizer->AddStretchSpacer();
        main_sizer->Add(ok_cancel_sizer, 0, wxEXPAND);

        SetSizer(main_sizer);
        Layout();
    }

开发者ID:adrianodelvigna，项目名称:wxwebconnect，代码行数:101，代码来源:promptservice.cpp

示例11: wxScrolledWindow


//.........这里部分代码省略.........
	m_ts_color = new ColorButton( m_custom_colors, ID_TIMESTAMP, wxBitmap(), wxDefaultPosition, wxSize( 20, 20 ), 0 );
	m_ts_color->SetColor( wxColour( 160, 160, 160 ) );

	bTSColorSizer->Add( m_ts_color, 0, wxALL, 5 );

	m_ts_label = new wxStaticText( m_custom_colors, wxID_ANY, _( "Timestamp" ), wxDefaultPosition, wxDefaultSize, 0 );
	m_ts_label->Wrap( -1 );
	bTSColorSizer->Add( m_ts_label, 1, wxALIGN_CENTER_VERTICAL | wxALL, 5 );

	bColorSizer2->Add( bTSColorSizer, 0, wxEXPAND, 5 );

	wxBoxSizer* bNoteColorSizer;
	bNoteColorSizer = new wxBoxSizer( wxHORIZONTAL );

	m_note_color = new ColorButton( m_custom_colors, ID_NOTIFICATION, wxBitmap(), wxDefaultPosition, wxSize( 20, 20 ), 0 );
	m_note_color->SetColor( wxColour( 255, 191, 0 ) );

	bNoteColorSizer->Add( m_note_color, 0, wxALL, 5 );

	m_note_label = new wxStaticText( m_custom_colors, wxID_ANY, _( "Notification" ), wxDefaultPosition, wxDefaultSize, 0 );
	m_note_label->Wrap( -1 );
	bNoteColorSizer->Add( m_note_label, 1, wxALIGN_CENTER_VERTICAL | wxALL, 5 );

	bColorSizer2->Add( bNoteColorSizer, 0, wxEXPAND, 5 );

	bColorSizer->Add( bColorSizer2, 1, wxEXPAND, 5 );

	bCustomColorsSizer->Add( bColorSizer, 1, wxEXPAND, 5 );

	m_test_text = new wxTextCtrl( m_custom_colors, wxID_ANY, _( "[19:35] ** Server ** Connected to Server.\n[22:30] <Dude> hi everyone\n[22:30] ** Dude2 joined the channel.\n[22:30] * Dude2 thinks his colors looks nice\n[22:45] <Dude> Dude2: orl?\n[22:46] <Dude2> But could be better, should tweak them some more...\n" ), wxDefaultPosition, wxDefaultSize, wxTE_MULTILINE | wxTE_READONLY | wxTE_RICH );
	bCustomColorsSizer->Add( m_test_text, 1, wxALL | wxEXPAND, 5 );

	m_custom_colors->SetSizer( bCustomColorsSizer );
	m_custom_colors->Layout();
	bCustomColorsSizer->Fit( m_custom_colors );
	bColorsVSizer->Add( m_custom_colors, 1, wxEXPAND | wxALL, 0 );

	wxBoxSizer* bFontNameSizer;
	bFontNameSizer = new wxBoxSizer( wxHORIZONTAL );

	m_font_label = new wxStaticText( this, wxID_ANY, _( "Font:" ), wxDefaultPosition, wxDefaultSize, 0 );
	m_font_label->Wrap( -1 );
	bFontNameSizer->Add( m_font_label, 0, wxALL | wxALIGN_CENTER_VERTICAL, 5 );

	m_fontname = new wxStaticText( this, wxID_ANY, _( "default" ), wxDefaultPosition, wxDefaultSize, 0 );
	m_fontname->Wrap( -1 );
	bFontNameSizer->Add( m_fontname, 0, wxALL | wxALIGN_CENTER_VERTICAL, 5 );

	m_select_font = new wxButton( this, ID_SELFONT, _( "Select..." ), wxDefaultPosition, wxDefaultSize, wxBU_EXACTFIT );
	bFontNameSizer->Add( m_select_font, 0, wxALL, 5 );

	bColorsVSizer->Add( bFontNameSizer, 0, wxEXPAND, 5 );

	sbColorsSizer->Add( bColorsVSizer, 1, wxEXPAND, 5 );

	bMainSizerV->Add( sbColorsSizer, 0, wxEXPAND | wxBOTTOM | wxRIGHT | wxLEFT | wxTOP, 5 );


	wxStaticBoxSizer* sbBehaviorSizer;
	sbBehaviorSizer = new wxStaticBoxSizer( new wxStaticBox( this, -1, _( "Behavior" ) ), wxHORIZONTAL );

	m_irc_colors = new wxCheckBox( this, wxID_ANY, _( "Enable Irc colors in chat messages" ), wxDefaultPosition, wxDefaultSize, 0 );
	m_irc_colors->SetValue( sett().GetUseIrcColors() );

	sbBehaviorSizer->Add( m_irc_colors, 0, wxALL, 5 );
#ifndef DISABLE_SOUND

开发者ID:Mailaender，项目名称:springlobby，代码行数:67，代码来源:chatoptionstab.cpp

示例12: wxFileConfig

void GameSettings::readConfiguration()
{
    wxString value;
    int index;
    // Open the Configfile
    conf = new wxFileConfig(wxEmptyString, wxEmptyString, wxT("keeperfx.cfg"),
        wxEmptyString, wxCONFIG_USE_LOCAL_FILE | wxCONFIG_USE_RELATIVE_PATH);

    // There's no point in editing these
    value = conf->Read(wxT("INSTALL_PATH"), wxT("./"));
    installPath = value;
    value = conf->Read(wxT("INSTALL_TYPE"), wxT("MAX"));
    installType = value;
    value = conf->Read(wxT("KEYBOARD"), wxT("101"));
    keybLayout = value;

    value = conf->Read(wxT("LANGUAGE"), supported_languages_code[0]);
    index = optionIndexInArray(supported_languages_code, WXSIZEOF(supported_languages_code), value);
    langRadio->SetSelection((index>=0)?index:0);

    value = conf->Read(wxT("SCREENSHOT"), supported_scrshotfmt_code[0]);
    index = optionIndexInArray(supported_scrshotfmt_code, WXSIZEOF(supported_scrshotfmt_code), value);
    scrshotRadio->SetSelection((index>=0)?index:0);

    int res_full_num = 0, res_wind_num = 0;
    value = conf->Read(wxT("FRONTEND_RES"), wxT("640x480x32 640x480x32 640x480x32"));
    {
        wxStringTokenizer tokenz(value, wxT(" \t\r\n"));
        index = 0;
        while ( tokenz.HasMoreTokens() )
        {
            wxString param = tokenz.GetNextToken();
            if (param.rfind('w') != wxString::npos)
                res_wind_num++;
            else
                res_full_num++;
            switch (index)
            {
            case 0:
                resFailCombo->SetValue(param);
                break;
            case 1:
                resMovieCombo->SetValue(param);
                break;
            case 2:
                resMenuCombo->SetValue(param);
                break;
            }
            index++;
        }
    }

    value = conf->Read(wxT("INGAME_RES"), wxT("640x480x32 1024x768x32"));
    {
        wxString selected_resolutions[5];
        size_t selected_num;
        wxString disabled_resolution;
        wxStringTokenizer tokenz(value, wxT(" \t\r\n"));
        disabled_resolution = resFailCombo->GetValue();
        selected_num=0;
        while ( tokenz.HasMoreTokens() && (selected_num < 5) )
        {
            wxString param = tokenz.GetNextToken();
            if (param.rfind('w') != wxString::npos)
                res_wind_num++;
            else
                res_full_num++;
            if (param.CmpNoCase(disabled_resolution) != 0)
            {
                selected_resolutions[selected_num] = param;
                selected_num++;
            }
        }
        // Now we have the amount of fullscreen and windowed resolutions ready
        if ((res_wind_num > 0) && (res_full_num > 0))
            index = 2;
        else if (res_wind_num > 0)
            index = 1;
        else
            index = 0;
        scrnControlRadio->SetSelection(index);
        // SetSelection() doesn't generate event to update resolution options, so lrt's call it:
        ChangeResolutionOptions(index);
        Layout();
        // Set in-game resolutions
        resIngameBox->SetSelected(4, selected_resolutions, selected_num);

    }

    index = conf->Read(wxT("POINTER_SENSITIVITY"), 100);
    value = wxString::Format(wxT("%d"), (int)index);
    mouseSensitvTxtCtrl->SetValue(value);

    value = conf->Read(wxT("CENSORSHIP"), supported_boolean_code[0]);
    index = optionIndexInArray(supported_boolean_code, WXSIZEOF(supported_boolean_code), value);
    censorChkBx->SetValue((index>=0)?index:0);
}

开发者ID:dsserega，项目名称:keeperfx，代码行数:97，代码来源:GameSettings.cpp

示例13: ChangeResolutionOptions

void GameSettings::OnScreenCtrlChange(wxCommandEvent& event)
{
    // Change screen control
    ChangeResolutionOptions(event.GetInt());
    Layout();
}

开发者ID:dsserega，项目名称:keeperfx，代码行数:6，代码来源:GameSettings.cpp

示例14: Layout

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ LayoutPoint函数代码示例发布时间：2022-05-30

C++ LaunchItem函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

2023-10-27

florent37/ViewAnimator: A fluent Android

2022-08-15

florent37/Shrine-MaterialDesign2: implem

2022-08-17

CVE-2020-36276

2022-09-23

SimpleSoftwareIO/simple-sms: Send and re

2022-08-13

阅读排行榜

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19237|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：10000|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8331|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8701|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8646|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9671|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8632|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：8005|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8668|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7540|2022-11-06

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服（服务时间 9:00～18:00）

在线QQ客服

地址：深圳市南山区西丽大学城创智工业园

电邮：jeky_zhao#qq.com

移动电话：139-2527-9053

客服电话

电子邮件

C++ Layout函数代码示例

示例1: Create

示例2: wxBoxSizer

示例3: CalculateMinSize

示例4: wxScrolledWindow

示例5: gcFrame

示例6: m_battle

示例7: wxWizardPageSimple

示例8: wxDialog

示例9: Layout

示例10: PromptDlgPassword

示例11: wxScrolledWindow

示例12: wxFileConfig

示例13: ChangeResolutionOptions

示例14: Layout

请发表评论

全部评论

上一篇：

下一篇：

jmartinezheras/2018-MachineLearning-Lect

tianli/matlab_offscreen: Matlab offscree

これがマストドンだ！使い方からインスタ

CVE-2022-34216

raichen/LinuxServerCodes: Linux高性能服

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053

客服电话

电子邮件

C++ Layout函数代码示例

示例1: Create

示例2: wxBoxSizer

示例3: CalculateMinSize

示例4: wxScrolledWindow

示例5: gcFrame

示例6: m_battle

示例7: wxWizardPageSimple

示例8: wxDialog

示例9: Layout

示例10: PromptDlgPassword

示例11: wxScrolledWindow

示例12: wxFileConfig

示例13: ChangeResolutionOptions

示例14: Layout

请发表评论

全部评论

上一篇：

下一篇：

jmartinezheras/2018-MachineLearning-Lect

tianli/matlab_offscreen: Matlab offscree

これがマストドンだ！ 使い方からインスタ

CVE-2022-34216

raichen/LinuxServerCodes: Linux高性能服

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053

これがマストドンだ！使い方からインスタ