本文整理汇总了C++中IsMainThread函数的典型用法代码示例。如果您正苦于以下问题:C++ IsMainThread函数的具体用法?C++ IsMainThread怎么用?C++ IsMainThread使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了IsMainThread函数的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: RunJob
int32_t RunJob(MainThreadRunner *runner, MainThreadJob *job){
JobEntry entry;
// initialize the entry
entry.runner = runner;
entry.pepper_instance = runner->pepper_instance_;
entry.job = job;
bool in_main_thread = IsMainThread();
// Must be off main thread, or on a pseudothread.
assert(!in_main_thread || in_pseudo_thread_);
// Thread type specific initialization.
if (in_main_thread) {
entry.pseudo_thread_job = true;
} else {
entry.pseudo_thread_job = false;
// Init condition variable.
entry.is_done = false;
int ret = pthread_mutex_init(&entry.done_mutex, NULL);
assert(!ret);
ret = pthread_cond_init(&entry.done_cond, NULL);
assert(!ret);
}
// put the job on the queue
pthread_mutex_lock(&(runner->lock_));
//job_queue_.push_back(&entry);
//JobEntry_list_push_back(&entry, &(runner->job_queue_));
runner->job_queue_[runner->qtail]=&entry;
runner->qtail = (runner->qtail+1)%QSIZE;
runner->size++;
pthread_mutex_unlock(&(runner->lock_));
#ifdef USE_PEPPER
// Schedule the job.
//pp::Module::Get()->core()->CallOnMainThread(0,
// pp::CompletionCallback(&DoWorkShim, this), PP_OK);
g_core_interface->CallOnMainThread(0,
PP_MakeCompletionCallback(&DoWorkShim, runner), PP_OK);
#endif
// Block differntly on the main thread.
if (entry.pseudo_thread_job) {
// block pseudothread until job is done
PseudoThreadBlock();
} else {
// wait on condition until the job is done
pthread_mutex_lock(&entry.done_mutex);
while (!entry.is_done) {
pthread_cond_wait(&entry.done_cond, &entry.done_mutex);
}
pthread_mutex_unlock(&entry.done_mutex);
pthread_mutex_destroy(&entry.done_mutex);
pthread_cond_destroy(&entry.done_cond);
}
// Cleanup.
//delete job;
free(job);
return entry.result;
}
开发者ID:bxl1989,项目名称:SDL_nacl_c,代码行数:60,代码来源:MainThreadRunner.c
示例2: ASSERT_
void Ctrl::EventLoop(Ctrl *ctrl)
{
GuiLock __;
ASSERT_(IsMainThread(), "EventLoop can only run in the main thread");
ASSERT(LoopLevel == 0 || ctrl);
LoopLevel++;
LLOG("Entering event loop at level " << LoopLevel << LOG_BEGIN);
Ptr<Ctrl> ploop;
if(ctrl) {
ploop = LoopCtrl;
LoopCtrl = ctrl;
ctrl->inloop = true;
}
bool quit = false;
int64 loopno = ++EventLoopNo;
ProcessEvents(&quit);
while(loopno > EndSessionLoopNo && !quit && (ctrl ? ctrl->IsOpen() && ctrl->InLoop() : GetTopCtrls().GetCount()))
{
// LLOG(GetSysTime() << " % " << (unsigned)msecs() % 10000 << ": EventLoop / GuiSleep");
SyncCaret();
GuiSleep(1000);
// LLOG(GetSysTime() << " % " << (unsigned)msecs() % 10000 << ": EventLoop / ProcessEvents");
ProcessEvents(&quit);
// LLOG(GetSysTime() << " % " << (unsigned)msecs() % 10000 << ": EventLoop / after ProcessEvents");
}
if(ctrl)
LoopCtrl = ploop;
LoopLevel--;
LLOG(LOG_END << "Leaving event loop ");
}
开发者ID:koz4k,项目名称:soccer,代码行数:32,代码来源:Win32Wnd.cpp
示例3: ASSERT
void Ctrl::GuiSleep0(int ms)
{
GuiLock __;
ASSERT(IsMainThread());
ELOG("GuiSleep");
if(EndSession())
return;
ELOG("GuiSleep 2");
int level = LeaveGuiMutexAll();
#if !defined(flagDLL) && !defined(PLATFORM_WINCE)
if(!OverwatchThread) {
DWORD dummy;
OverwatchThread = CreateThread(NULL, 0x100000, Win32OverwatchThread, NULL, 0, &dummy);
ELOG("ExitLoopEventWait 1");
ExitLoopEvent().Wait();
}
HANDLE h[1];
*h = ExitLoopEvent().GetHandle();
ELOG("ExitLoopEventWait 2 " << (void *)*h);
MsgWaitForMultipleObjects(1, h, FALSE, ms, QS_ALLINPUT);
#else
MsgWaitForMultipleObjects(0, NULL, FALSE, ms, QS_ALLINPUT);
#endif
EnterGuiMutex(level);
}
开发者ID:dreamsxin,项目名称:ultimatepp,代码行数:25,代码来源:Win32Wnd.cpp
示例4:
SpanRect::SpanRect(const Rect &inRect, int inAA)
{
mAA = inAA;
mAAMask = ~(mAA-1);
mRect = inRect * inAA;
mWinding = 0xffffffff;
mTransitions = 0;
if (IsMainThread())
{
if (sTransitionsBuffer.size() < mRect.h)
sTransitionsBuffer.resize(mRect.h);
mTransitions = &sTransitionsBuffer[0];
}
else
{
mTransitions = new Transitions[mRect.h];
}
for (int y = 0; y < mRect.h; y++)
{
mTransitions[y].mLeft = 0;
mTransitions[y].mX.resize(0);
}
mMinX = (mRect.x - 1) << 10;
mMaxX = (mRect.x1()) << 10;
mLeftPos = mRect.x;
}
开发者ID:AZidan,项目名称:nme,代码行数:29,代码来源:AlphaMask.cpp
示例5: ASSERT_
void Ctrl::EventLoop(Ctrl *ctrl)
{
GuiLock __;
ASSERT_(IsMainThread(), "EventLoop can only run in the main thread");
ASSERT(LoopLevel == 0 || ctrl);
LoopLevel++;
LLOG("Entering event loop at level " << LoopLevel << LOG_BEGIN);
if(!GetMouseRight() && !GetMouseMiddle() && !GetMouseLeft())
ReleaseCtrlCapture();
Ptr<Ctrl> ploop;
if(ctrl) {
ploop = LoopCtrl;
LoopCtrl = ctrl;
ctrl->inloop = true;
}
while(!IsEndSession() &&
(ctrl ? ctrl->IsOpen() && ctrl->InLoop() : GetTopCtrls().GetCount())) {
FetchEvents(TRUE);
ProcessEvents();
}
if(ctrl)
LoopCtrl = ploop;
LoopLevel--;
LLOG(LOG_END << "Leaving event loop ");
}
开发者ID:AbdelghaniDr,项目名称:mirror,代码行数:27,代码来源:GtkEvent.cpp
示例6: DuiLogInfo
bool CWin::RegisterSkin(STRINGorID xml, LPCTSTR type /* = NULL */, IDialogBuilderCallback* pCallback /* = NULL */, CControlUI* pParent /* = NULL */)
{
DuiLogInfo(_T("RegisterSkin xml:%s,type:%s"), (LPCTSTR)xml.m_lpstr, type == NULL ? _T("0") : type);
assert(IsWindow());
assert(IsMainThread());
UnRegisterSkin();
_paintManager = new CPaintManagerUI();
_paintManager->Init(m_hWnd);
CControlUI* pRoot = this->CreateRoot(xml,type,pCallback,pParent);
if (!pRoot)
DuiLogError(_T("RegisterSkin xml:%s,type:%s"), (LPCTSTR)xml.m_lpstr, (type == NULL ? _T("0") : type));
CDuiString sError = CDuiString::FormatString(_T("Failed to parse XML:%s"), (LPCTSTR)xml.m_lpstr);
char serror[MAX_PATH] = { 0 };
sprintf_s(serror, MAX_PATH, "Failed to parse XML:%s", (LPCTSTR)xml.m_lpstr);
ASSERT(pRoot && "Failed to parse XML");
DuiAssertX(pRoot, serror);
if (pRoot)
{
_bValid = TRUE;
return _paintManager->AttachDialog(pRoot);
}
return false;
}
开发者ID:uvbs,项目名称:myduilib,代码行数:26,代码来源:Window.cpp
示例7: CreateDeviceSecondCallCheck
////////////////////////////////////////////////
//
// CreateDeviceSecondCallCheck
//
// Check for, and handle subsequent calls to create device
// Know to occur with RTSSHooks.dll (EVGA Precision X on screen display)
//
////////////////////////////////////////////////
bool CreateDeviceSecondCallCheck(HRESULT& hOutResult, IDirect3D9* pDirect3D, UINT Adapter, D3DDEVTYPE DeviceType, HWND hFocusWindow, DWORD BehaviorFlags,
D3DPRESENT_PARAMETERS* pPresentationParameters, IDirect3DDevice9** ppReturnedDeviceInterface)
{
static uint uiCreateCount = 0;
// Also check for invalid size
if (pPresentationParameters->BackBufferWidth == 0)
{
WriteDebugEvent(SString(" Passing through call #%d to CreateDevice because size is invalid", uiCreateCount));
return true;
}
// Also check for calls from other threads
if (!IsMainThread())
{
SString strMessage(" Passing through call #%d to CreateDevice because not main thread", uiCreateCount);
WriteDebugEvent(strMessage);
AddReportLog(8627, strMessage);
return true;
}
if (++uiCreateCount == 1)
return false;
WriteDebugEvent(SString(" Passing through call #%d to CreateDevice", uiCreateCount));
hOutResult = pDirect3D->CreateDevice(Adapter, DeviceType, hFocusWindow, BehaviorFlags, pPresentationParameters, ppReturnedDeviceInterface);
return true;
}
开发者ID:ccw808,项目名称:mtasa-blue,代码行数:35,代码来源:CProxyDirect3D9.cpp
示例8: LogAssert
bool SchedulerBase::CreateSignalChannel(int *outSigId, SignalCallback callback, void *userdata)
{
LogAssert(IsMainThread());
if (!LogVerify(outSigId) || !LogVerify(callback))
return false;
*outSigId = -1;
// Create a set of pipes
int fdPipe[2];
int flags;
int ret = pipe(fdPipe);
if (ret != 0)
{
gLog.ErrnoError(errno, "Unable to create pipe for signaling");
return false;
}
FileDescriptor pipeRead(fdPipe[0]);
FileDescriptor pipeWrite(fdPipe[1]);
flags = fcntl(pipeRead, F_GETFL);
flags = flags | O_NONBLOCK;
if (-1 == fcntl(pipeRead, F_SETFL, flags))
{
gLog.LogError("Failed to set read pipe to non-blocking.");
return false;
}
flags = fcntl(pipeWrite, F_GETFL);
flags = flags | O_NONBLOCK;
if (-1 == fcntl(pipeWrite, F_SETFL, flags))
{
gLog.LogError("Failed to set write pipe to non-blocking.");
return false;
}
if (!watchSocket(pipeRead))
return false;
schedulerSignalItem item;
item.callback = callback;
item.userdata = userdata;
item.fdWrite = pipeWrite;
item.fdRead = pipeRead;
m_signals[item.fdRead] = item;
pipeWrite.Detach();
pipeRead.Detach();
*outSigId = item.fdWrite;
gLog.Optional(Log::TimerDetail, "Created signal channel from %d to %d .", item.fdWrite, item.fdRead);
return true;
}
开发者ID:Lennie,项目名称:OpenBFDD,代码行数:59,代码来源:SchedulerBase.cpp
示例9: ASSERT
void Ctrl::GuiSleep0(int ms)
{
GuiLock __;
ASSERT(IsMainThread());
LLOG("GuiSleep");
int level = LeaveGuiMutexAll();
FBSleep(ms);
EnterGuiMutex(level);
}
开发者ID:AbdelghaniDr,项目名称:mirror,代码行数:9,代码来源:Wnd.cpp
示例10: DestroyShader
void DestroyShader(unsigned int inShader)
{
if ( !IsMainThread() )
{
mHasZombie = true;
mZombieShaders.push_back(inShader);
}
else
glDeleteShader(inShader);
}
开发者ID:OswaldoD,项目名称:TrigonometricPark,代码行数:10,代码来源:OpenGLContext.cpp
示例11: DestroyProgram
void DestroyProgram(unsigned int inProg)
{
if ( !IsMainThread() )
{
mHasZombie = true;
mZombiePrograms.push_back(inProg);
}
else
glDeleteProgram(inProg);
}
开发者ID:OswaldoD,项目名称:TrigonometricPark,代码行数:10,代码来源:OpenGLContext.cpp
示例12: DestroyVbo
void DestroyVbo(unsigned int inVbo)
{
if ( !IsMainThread() )
{
mHasZombie = true;
mZombieVbos.push_back(inVbo);
}
else
glDeleteBuffers(1,&inVbo);
}
开发者ID:OswaldoD,项目名称:TrigonometricPark,代码行数:10,代码来源:OpenGLContext.cpp
示例13: DestroyTexture
void DestroyTexture(unsigned int inTex)
{
if ( !IsMainThread() )
{
mHasZombie = true;
mZombieTextures.push_back(inTex);
}
else
glDeleteTextures(1,&inTex);
}
开发者ID:Greg209,项目名称:NME,代码行数:10,代码来源:OpenGLContext.cpp
示例14: ASSERT
void Ctrl::GuiSleep(int ms)
{
GuiLock __;
ASSERT(IsMainThread());
// LLOG("GuiSleep");
int level = LeaveGuiMutexAll();
socket.Timeout(ms).WaitRead();
socket.Timeout(20000);
EnterGuiMutex(level);
}
开发者ID:AbdelghaniDr,项目名称:mirror,代码行数:10,代码来源:Event.cpp
示例15: DestroyRenderbuffer
void DestroyRenderbuffer(unsigned int inBuffer)
{
if ( !IsMainThread() )
{
mHasZombie = true;
mZombieRenderbuffers.push_back(inBuffer);
}
else
glDeleteRenderbuffers(1,&inBuffer);
}
开发者ID:OswaldoD,项目名称:TrigonometricPark,代码行数:10,代码来源:OpenGLContext.cpp
示例16: ASSERT
bool Ctrl::SetWndCapture()
{
GuiLock __;
ASSERT(IsMainThread());
HWND hwnd = GetHWND();
if(hwnd) {
::SetCapture(hwnd);
return true;
}
return false;
}
开发者ID:AbdelghaniDr,项目名称:mirror,代码行数:11,代码来源:WinAltWnd.cpp
示例17: DestroyNativeTexture
void DestroyNativeTexture(void *inNativeTexture)
{
GLuint tid = (GLuint)(size_t)inNativeTexture;
if ( !IsMainThread() )
{
//printf("Warning - leaking texture %d", tid );
mZombieTextures.push_back(tid);
}
else
glDeleteTextures(1,&tid);
}
开发者ID:DjPale,项目名称:NME,代码行数:11,代码来源:OpenGLContext.cpp
示例18: PseudoThreadResume
void PseudoThreadResume(){
// Must be run from the main thread.
assert(IsMainThread());
// Pseudothread must have been forked.
assert(forked_pseudo_thread_);
// Can only be run from the main thread.
assert(!in_pseudo_thread_);
if (!setjmp(main_thread_state_)) {
// Go back to the pseudo thread after saving state.
longjmp(pseudo_thread_state_, 1);
}
in_pseudo_thread_ = false;
}
开发者ID:bxl1989,项目名称:SDL_nacl_c,代码行数:13,代码来源:MainThreadRunner.c
示例19: LLOG
bool Ctrl::SetWndCapture()
{
GuiLock __;
LLOG("Ctrl::SetWndCapture() in " << UPP::Name(this));
ASSERT(IsMainThread());
HWND hwnd = GetHWND();
if(hwnd) {
::SetCapture(hwnd);
LLOG("SetCapture succeeded");
return true;
}
return false;
}
开发者ID:koz4k,项目名称:soccer,代码行数:13,代码来源:Win32Wnd.cpp
示例20: ASSERT
bool Ctrl::ReleaseWndCapture0()
{
GuiLock __;
ASSERT(IsMainThread());
LLOG("ReleaseWndCapture");
if(grabwindow) {
gdk_pointer_ungrab(CurrentTime);
grabwindow = NULL;
StartGrabPopup();
return true;
}
return false;
}
开发者ID:dreamsxin,项目名称:ultimatepp,代码行数:13,代码来源:GtkCapture.cpp
注:本文中的IsMainThread函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。 |
请发表评论