C++ IP6_UPD_PO_STATS函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中IP6_UPD_PO_STATS函数的典型用法代码示例。如果您正苦于以下问题：C++ IP6_UPD_PO_STATS函数的具体用法？C++ IP6_UPD_PO_STATS怎么用？C++ IP6_UPD_PO_STATS使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了IP6_UPD_PO_STATS函数的9个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: ip6_finish_output2

static int ip6_finish_output2(struct sk_buff *skb)
{
	struct dst_entry *dst = skb_dst(skb);
	struct net_device *dev = dst->dev;
	struct neighbour *neigh;

#if !defined(CONFIG_IMQ) && !defined(CONFIG_IMQ_MODULE)
	skb->protocol = htons(ETH_P_IPV6);
	skb->dev = dev;
#endif

	if (ipv6_addr_is_multicast(&ipv6_hdr(skb)->daddr)) {
		struct inet6_dev *idev = ip6_dst_idev(skb_dst(skb));

		if (!(dev->flags & IFF_LOOPBACK) && sk_mc_loop(skb->sk) &&
		    ((mroute6_socket(dev_net(dev), skb) &&
		     !(IP6CB(skb)->flags & IP6SKB_FORWARDED)) ||
		     ipv6_chk_mcast_addr(dev, &ipv6_hdr(skb)->daddr,
					 &ipv6_hdr(skb)->saddr))) {
			struct sk_buff *newskb = skb_clone(skb, GFP_ATOMIC);

			/* Do not check for IFF_ALLMULTI; multicast routing
			   is not supported in any case.
			 */
			if (newskb)
				NF_HOOK(NFPROTO_IPV6, NF_INET_POST_ROUTING,
					newskb, NULL, newskb->dev,
					dev_loopback_xmit);

			if (ipv6_hdr(skb)->hop_limit == 0) {
				IP6_INC_STATS(dev_net(dev), idev,
					      IPSTATS_MIB_OUTDISCARDS);
				kfree_skb(skb);
				return 0;
			}
		}

		IP6_UPD_PO_STATS(dev_net(dev), idev, IPSTATS_MIB_OUTMCAST,
				skb->len);
	}

	rcu_read_lock();
	neigh = dst_get_neighbour(dst);
	if (neigh) {
		int res = neigh_output(neigh, skb);

		rcu_read_unlock();
		return res;
	}
	rcu_read_unlock();
	IP6_INC_STATS(dev_net(dst->dev),
		      ip6_dst_idev(dst), IPSTATS_MIB_OUTNOROUTES);
	kfree_skb(skb);
	return -EINVAL;
}

开发者ID:pierce1234，项目名称:rt-n56u，代码行数:55，代码来源:ip6_output.c

示例2: ndisc_send_skb

static void ndisc_send_skb(struct sk_buff *skb,
			   const struct in6_addr *daddr,
			   const struct in6_addr *saddr)
{
	struct dst_entry *dst = skb_dst(skb);
	struct net *net = dev_net(skb->dev);
	struct sock *sk = net->ipv6.ndisc_sk;
	struct inet6_dev *idev;
	int err;
	struct icmp6hdr *icmp6h = icmp6_hdr(skb);
	u8 type;

	type = icmp6h->icmp6_type;

	if (!dst) {
		struct flowi6 fl6;
		int oif = l3mdev_fib_oif(skb->dev);

		icmpv6_flow_init(sk, &fl6, type, saddr, daddr, oif);
		if (oif != skb->dev->ifindex)
			fl6.flowi6_flags |= FLOWI_FLAG_L3MDEV_SRC;
		dst = icmp6_dst_alloc(skb->dev, &fl6);
		if (IS_ERR(dst)) {
			kfree_skb(skb);
			return;
		}

		skb_dst_set(skb, dst);
	}

	icmp6h->icmp6_cksum = csum_ipv6_magic(saddr, daddr, skb->len,
					      IPPROTO_ICMPV6,
					      csum_partial(icmp6h,
							   skb->len, 0));

	ip6_nd_hdr(skb, saddr, daddr, inet6_sk(sk)->hop_limit, skb->len);

	rcu_read_lock();
	idev = __in6_dev_get(dst->dev);
	IP6_UPD_PO_STATS(net, idev, IPSTATS_MIB_OUT, skb->len);

	err = NF_HOOK(NFPROTO_IPV6, NF_INET_LOCAL_OUT,
		      net, sk, skb, NULL, dst->dev,
		      dst_output);
	if (!err) {
		ICMP6MSGOUT_INC_STATS(net, idev, type);
		ICMP6_INC_STATS(net, idev, ICMP6_MIB_OUTMSGS);
	}

	rcu_read_unlock();
}

开发者ID:285452612，项目名称:linux，代码行数:51，代码来源:ndisc.c

示例3: ndisc_send_skb

void ndisc_send_skb(struct sk_buff *skb,
		    struct net_device *dev,
		    struct neighbour *neigh,
		    const struct in6_addr *daddr,
		    const struct in6_addr *saddr,
		    struct icmp6hdr *icmp6h)
{
	struct flowi6 fl6;
	struct dst_entry *dst;
	struct net *net = dev_net(dev);
	struct sock *sk = net->ipv6.ndisc_sk;
	struct inet6_dev *idev;
	int err;
	u8 type;

	type = icmp6h->icmp6_type;

	icmpv6_flow_init(sk, &fl6, type, saddr, daddr, dev->ifindex);

	dst = icmp6_dst_alloc(dev, neigh, daddr);
	if (!dst) {
		kfree_skb(skb);
		return;
	}

	dst = xfrm_lookup(net, dst, flowi6_to_flowi(&fl6), NULL, 0);
	if (IS_ERR(dst)) {
		kfree_skb(skb);
		return;
	}

	skb_dst_set(skb, dst);

	rcu_read_lock();
	idev = __in6_dev_get(dst->dev);
	IP6_UPD_PO_STATS(net, idev, IPSTATS_MIB_OUT, skb->len);

	err = NF_HOOK(NFPROTO_IPV6, NF_INET_LOCAL_OUT, skb, NULL, dst->dev,
		      dst_output);
	if (!err) {
		ICMP6MSGOUT_INC_STATS(net, idev, type);
		ICMP6_INC_STATS(net, idev, ICMP6_MIB_OUTMSGS);
	}

	rcu_read_unlock();
}

开发者ID:PterX，项目名称:rt-n56u，代码行数:46，代码来源:ndisc.c

示例4: ip6_output2

static int ip6_output2(struct sk_buff *skb)
{
	struct dst_entry *dst = skb_dst(skb);
	struct net_device *dev = dst->dev;

	skb->protocol = htons(ETH_P_IPV6);
	skb->dev = dev;

	if (ipv6_addr_is_multicast(&ipv6_hdr(skb)->daddr)) {
		struct ipv6_pinfo* np = skb->sk ? inet6_sk(skb->sk) : NULL;
		struct inet6_dev *idev = ip6_dst_idev(skb_dst(skb));

		if (!(dev->flags & IFF_LOOPBACK) && (!np || np->mc_loop) &&
		    ((mroute6_socket(dev_net(dev)) &&
		     !(IP6CB(skb)->flags & IP6SKB_FORWARDED)) ||
		     ipv6_chk_mcast_addr(dev, &ipv6_hdr(skb)->daddr,
					 &ipv6_hdr(skb)->saddr))) {
			struct sk_buff *newskb = skb_clone(skb, GFP_ATOMIC);

			/* Do not check for IFF_ALLMULTI; multicast routing
			   is not supported in any case.
			 */
			if (newskb)
				NF_HOOK(PF_INET6, NF_INET_POST_ROUTING, newskb,
					NULL, newskb->dev,
					ip6_dev_loopback_xmit);

			if (ipv6_hdr(skb)->hop_limit == 0) {
				IP6_INC_STATS(dev_net(dev), idev,
					      IPSTATS_MIB_OUTDISCARDS);
				kfree_skb(skb);
				return 0;
			}
		}

		IP6_UPD_PO_STATS(dev_net(dev), idev, IPSTATS_MIB_OUTMCAST,
				skb->len);
	}

	return NF_HOOK(PF_INET6, NF_INET_POST_ROUTING, skb, NULL, skb->dev,
		       ip6_output_finish);
}

开发者ID:vps2fast，项目名称:openvz-kernel，代码行数:42，代码来源:ip6_output.c

示例5: ip6_xmit

int ip6_xmit(struct sock *sk, struct sk_buff *skb, struct flowi6 *fl6,
	     struct ipv6_txoptions *opt)
{
	struct net *net = sock_net(sk);
	struct ipv6_pinfo *np = inet6_sk(sk);
	struct in6_addr *first_hop = &fl6->daddr;
	struct dst_entry *dst = skb_dst(skb);
	struct ipv6hdr *hdr;
	u8  proto = fl6->flowi6_proto;
	int seg_len = skb->len;
	int hlimit = -1;
	int tclass = 0;
	u32 mtu;

	if (opt) {
		unsigned int head_room;

		/* First: exthdrs may take lots of space (~8K for now)
		   MAX_HEADER is not enough.
		 */
		head_room = opt->opt_nflen + opt->opt_flen;
		seg_len += head_room;
		head_room += sizeof(struct ipv6hdr) + LL_RESERVED_SPACE(dst->dev);

		if (skb_headroom(skb) < head_room) {
			struct sk_buff *skb2 = skb_realloc_headroom(skb, head_room);
			if (skb2 == NULL) {
				IP6_INC_STATS(net, ip6_dst_idev(skb_dst(skb)),
					      IPSTATS_MIB_OUTDISCARDS);
				kfree_skb(skb);
				return -ENOBUFS;
			}
			kfree_skb(skb);
			skb = skb2;
			skb_set_owner_w(skb, sk);
		}
		if (opt->opt_flen)
			ipv6_push_frag_opts(skb, opt, &proto);
		if (opt->opt_nflen)
			ipv6_push_nfrag_opts(skb, opt, &proto, &first_hop);
	}

	skb_push(skb, sizeof(struct ipv6hdr));
	skb_reset_network_header(skb);
	hdr = ipv6_hdr(skb);

	/*
	 *	Fill in the IPv6 header
	 */
	if (np) {
		tclass = np->tclass;
		hlimit = np->hop_limit;
	}
	if (hlimit < 0)
		hlimit = ip6_dst_hoplimit(dst);

	*(__be32 *)hdr = htonl(0x60000000 | (tclass << 20)) | fl6->flowlabel;

	hdr->payload_len = htons(seg_len);
	hdr->nexthdr = proto;
	hdr->hop_limit = hlimit;

	ipv6_addr_copy(&hdr->saddr, &fl6->saddr);
	ipv6_addr_copy(&hdr->daddr, first_hop);

	skb->priority = sk->sk_priority;
	skb->mark = sk->sk_mark;

	mtu = dst_mtu(dst);
	if ((skb->len <= mtu) || skb->local_df || skb_is_gso(skb)) {
		IP6_UPD_PO_STATS(net, ip6_dst_idev(skb_dst(skb)),
			      IPSTATS_MIB_OUT, skb->len);
		return NF_HOOK(NFPROTO_IPV6, NF_INET_LOCAL_OUT, skb, NULL,
			       dst->dev, dst_output);
	}

	if (net_ratelimit())
		printk(KERN_DEBUG "IPv6: sending pkt_too_big to self\n");
	skb->dev = dst->dev;
	icmpv6_send(skb, ICMPV6_PKT_TOOBIG, 0, mtu);
	IP6_INC_STATS(net, ip6_dst_idev(skb_dst(skb)), IPSTATS_MIB_FRAGFAILS);
	kfree_skb(skb);
	return -EMSGSIZE;
}

开发者ID:caoxin1988，项目名称:linux-3.0.86，代码行数:84，代码来源:ip6_output.c

示例6: ip6_push_pending_frames

int ip6_push_pending_frames(struct sock *sk)
{
	struct sk_buff *skb, *tmp_skb;
	struct sk_buff **tail_skb;
	struct in6_addr final_dst_buf, *final_dst = &final_dst_buf;
	struct inet_sock *inet = inet_sk(sk);
	struct ipv6_pinfo *np = inet6_sk(sk);
	struct net *net = sock_net(sk);
	struct ipv6hdr *hdr;
	struct ipv6_txoptions *opt = np->cork.opt;
	struct rt6_info *rt = (struct rt6_info *)inet->cork.base.dst;
	struct flowi6 *fl6 = &inet->cork.fl.u.ip6;
	unsigned char proto = fl6->flowi6_proto;
	int err = 0;

	if ((skb = __skb_dequeue(&sk->sk_write_queue)) == NULL)
		goto out;
	tail_skb = &(skb_shinfo(skb)->frag_list);

	/* move skb->data to ip header from ext header */
	if (skb->data < skb_network_header(skb))
		__skb_pull(skb, skb_network_offset(skb));
	while ((tmp_skb = __skb_dequeue(&sk->sk_write_queue)) != NULL) {
		__skb_pull(tmp_skb, skb_network_header_len(skb));
		*tail_skb = tmp_skb;
		tail_skb = &(tmp_skb->next);
		skb->len += tmp_skb->len;
		skb->data_len += tmp_skb->len;
		skb->truesize += tmp_skb->truesize;
		tmp_skb->destructor = NULL;
		tmp_skb->sk = NULL;
	}

	/* Allow local fragmentation. */
	if (np->pmtudisc < IPV6_PMTUDISC_DO)
		skb->local_df = 1;

	ipv6_addr_copy(final_dst, &fl6->daddr);
	__skb_pull(skb, skb_network_header_len(skb));
	if (opt && opt->opt_flen)
		ipv6_push_frag_opts(skb, opt, &proto);
	if (opt && opt->opt_nflen)
		ipv6_push_nfrag_opts(skb, opt, &proto, &final_dst);

	skb_push(skb, sizeof(struct ipv6hdr));
	skb_reset_network_header(skb);
	hdr = ipv6_hdr(skb);

	*(__be32*)hdr = fl6->flowlabel |
		     htonl(0x60000000 | ((int)np->cork.tclass << 20));

	hdr->hop_limit = np->cork.hop_limit;
	hdr->nexthdr = proto;
	ipv6_addr_copy(&hdr->saddr, &fl6->saddr);
	ipv6_addr_copy(&hdr->daddr, final_dst);

	skb->priority = sk->sk_priority;
	skb->mark = sk->sk_mark;

	skb_dst_set(skb, dst_clone(&rt->dst));
	IP6_UPD_PO_STATS(net, rt->rt6i_idev, IPSTATS_MIB_OUT, skb->len);
	if (proto == IPPROTO_ICMPV6) {
		struct inet6_dev *idev = ip6_dst_idev(skb_dst(skb));

		ICMP6MSGOUT_INC_STATS_BH(net, idev, icmp6_hdr(skb)->icmp6_type);
		ICMP6_INC_STATS_BH(net, idev, ICMP6_MIB_OUTMSGS);
	}

	err = ip6_local_out(skb);
	if (err) {
		if (err > 0)
			err = net_xmit_errno(err);
		if (err)
			goto error;
	}

out:
	ip6_cork_release(inet, np);
	return err;
error:
	IP6_INC_STATS(net, rt->rt6i_idev, IPSTATS_MIB_OUTDISCARDS);
	goto out;
}

开发者ID:caoxin1988，项目名称:linux-3.0.86，代码行数:83，代码来源:ip6_output.c

示例7: ip6_finish_output2

static int ip6_finish_output2(struct net *net, struct sock *sk, struct sk_buff *skb)
{
	struct dst_entry *dst = skb_dst(skb);
	struct net_device *dev = dst->dev;
	struct neighbour *neigh;
	struct in6_addr *nexthop;
	int ret;

	skb->protocol = htons(ETH_P_IPV6);
	skb->dev = dev;

	if (ipv6_addr_is_multicast(&ipv6_hdr(skb)->daddr)) {
		struct inet6_dev *idev = ip6_dst_idev(skb_dst(skb));

		if (!(dev->flags & IFF_LOOPBACK) && sk_mc_loop(sk) &&
		    ((mroute6_socket(net, skb) &&
		     !(IP6CB(skb)->flags & IP6SKB_FORWARDED)) ||
		     ipv6_chk_mcast_addr(dev, &ipv6_hdr(skb)->daddr,
					 &ipv6_hdr(skb)->saddr))) {
			struct sk_buff *newskb = skb_clone(skb, GFP_ATOMIC);

			/* Do not check for IFF_ALLMULTI; multicast routing
			   is not supported in any case.
			 */
			if (newskb)
				NF_HOOK(NFPROTO_IPV6, NF_INET_POST_ROUTING,
					net, sk, newskb, NULL, newskb->dev,
					dev_loopback_xmit);

			if (ipv6_hdr(skb)->hop_limit == 0) {
				IP6_INC_STATS(net, idev,
					      IPSTATS_MIB_OUTDISCARDS);
				kfree_skb(skb);
				return 0;
			}
		}

		IP6_UPD_PO_STATS(net, idev, IPSTATS_MIB_OUTMCAST, skb->len);

		if (IPV6_ADDR_MC_SCOPE(&ipv6_hdr(skb)->daddr) <=
		    IPV6_ADDR_SCOPE_NODELOCAL &&
		    !(dev->flags & IFF_LOOPBACK)) {
			kfree_skb(skb);
			return 0;
		}
	}

	rcu_read_lock_bh();
	nexthop = rt6_nexthop((struct rt6_info *)dst, &ipv6_hdr(skb)->daddr);
	neigh = __ipv6_neigh_lookup_noref(dst->dev, nexthop);
	if (unlikely(!neigh))
		neigh = __neigh_create(&nd_tbl, nexthop, dst->dev, false);
	if (!IS_ERR(neigh)) {
		ret = dst_neigh_output(dst, neigh, skb);
		rcu_read_unlock_bh();
		return ret;
	}
	rcu_read_unlock_bh();

	IP6_INC_STATS(net, ip6_dst_idev(dst), IPSTATS_MIB_OUTNOROUTES);
	kfree_skb(skb);
	return -EINVAL;
}

开发者ID:guanhe0，项目名称:kernel，代码行数:63，代码来源:ip6_output.c

示例8: inet6_sk

struct sk_buff *__ip6_make_skb(struct sock *sk,
			       struct sk_buff_head *queue,
			       struct inet_cork_full *cork,
			       struct inet6_cork *v6_cork)
{
	struct sk_buff *skb, *tmp_skb;
	struct sk_buff **tail_skb;
	struct in6_addr final_dst_buf, *final_dst = &final_dst_buf;
	struct ipv6_pinfo *np = inet6_sk(sk);
	struct net *net = sock_net(sk);
	struct ipv6hdr *hdr;
	struct ipv6_txoptions *opt = v6_cork->opt;
	struct rt6_info *rt = (struct rt6_info *)cork->base.dst;
	struct flowi6 *fl6 = &cork->fl.u.ip6;
	unsigned char proto = fl6->flowi6_proto;

	skb = __skb_dequeue(queue);
	if (!skb)
		goto out;
	tail_skb = &(skb_shinfo(skb)->frag_list);

	/* move skb->data to ip header from ext header */
	if (skb->data < skb_network_header(skb))
		__skb_pull(skb, skb_network_offset(skb));
	while ((tmp_skb = __skb_dequeue(queue)) != NULL) {
		__skb_pull(tmp_skb, skb_network_header_len(skb));
		*tail_skb = tmp_skb;
		tail_skb = &(tmp_skb->next);
		skb->len += tmp_skb->len;
		skb->data_len += tmp_skb->len;
		skb->truesize += tmp_skb->truesize;
		tmp_skb->destructor = NULL;
		tmp_skb->sk = NULL;
	}

	/* Allow local fragmentation. */
	skb->ignore_df = ip6_sk_ignore_df(sk);

	*final_dst = fl6->daddr;
	__skb_pull(skb, skb_network_header_len(skb));
	if (opt && opt->opt_flen)
		ipv6_push_frag_opts(skb, opt, &proto);
	if (opt && opt->opt_nflen)
		ipv6_push_nfrag_opts(skb, opt, &proto, &final_dst);

	skb_push(skb, sizeof(struct ipv6hdr));
	skb_reset_network_header(skb);
	hdr = ipv6_hdr(skb);

	ip6_flow_hdr(hdr, v6_cork->tclass,
		     ip6_make_flowlabel(net, skb, fl6->flowlabel,
					np->autoflowlabel, fl6));
	hdr->hop_limit = v6_cork->hop_limit;
	hdr->nexthdr = proto;
	hdr->saddr = fl6->saddr;
	hdr->daddr = *final_dst;

	skb->priority = sk->sk_priority;
	skb->mark = sk->sk_mark;

	skb_dst_set(skb, dst_clone(&rt->dst));
	IP6_UPD_PO_STATS(net, rt->rt6i_idev, IPSTATS_MIB_OUT, skb->len);
	if (proto == IPPROTO_ICMPV6) {
		struct inet6_dev *idev = ip6_dst_idev(skb_dst(skb));

		ICMP6MSGOUT_INC_STATS(net, idev, icmp6_hdr(skb)->icmp6_type);
		ICMP6_INC_STATS(net, idev, ICMP6_MIB_OUTMSGS);
	}

	ip6_cork_release(cork, v6_cork);
out:
	return skb;
}

开发者ID:guanhe0，项目名称:kernel，代码行数:73，代码来源:ip6_output.c

示例9: ip6_xmit

/*
 * xmit an sk_buff (used by TCP, SCTP and DCCP)
 * Note : socket lock is not held for SYNACK packets, but might be modified
 * by calls to skb_set_owner_w() and ipv6_local_error(),
 * which are using proper atomic operations or spinlocks.
 */
int ip6_xmit(const struct sock *sk, struct sk_buff *skb, struct flowi6 *fl6,
	     struct ipv6_txoptions *opt, int tclass)
{
	struct net *net = sock_net(sk);
	const struct ipv6_pinfo *np = inet6_sk(sk);
	struct in6_addr *first_hop = &fl6->daddr;
	struct dst_entry *dst = skb_dst(skb);
	struct ipv6hdr *hdr;
	u8  proto = fl6->flowi6_proto;
	int seg_len = skb->len;
	int hlimit = -1;
	u32 mtu;

	if (opt) {
		unsigned int head_room;

		/* First: exthdrs may take lots of space (~8K for now)
		   MAX_HEADER is not enough.
		 */
		head_room = opt->opt_nflen + opt->opt_flen;
		seg_len += head_room;
		head_room += sizeof(struct ipv6hdr) + LL_RESERVED_SPACE(dst->dev);

		if (skb_headroom(skb) < head_room) {
			struct sk_buff *skb2 = skb_realloc_headroom(skb, head_room);
			if (!skb2) {
				IP6_INC_STATS(net, ip6_dst_idev(skb_dst(skb)),
					      IPSTATS_MIB_OUTDISCARDS);
				kfree_skb(skb);
				return -ENOBUFS;
			}
			consume_skb(skb);
			skb = skb2;
			/* skb_set_owner_w() changes sk->sk_wmem_alloc atomically,
			 * it is safe to call in our context (socket lock not held)
			 */
			skb_set_owner_w(skb, (struct sock *)sk);
		}
		if (opt->opt_flen)
			ipv6_push_frag_opts(skb, opt, &proto);
		if (opt->opt_nflen)
			ipv6_push_nfrag_opts(skb, opt, &proto, &first_hop);
	}

	skb_push(skb, sizeof(struct ipv6hdr));
	skb_reset_network_header(skb);
	hdr = ipv6_hdr(skb);

	/*
	 *	Fill in the IPv6 header
	 */
	if (np)
		hlimit = np->hop_limit;
	if (hlimit < 0)
		hlimit = ip6_dst_hoplimit(dst);

	ip6_flow_hdr(hdr, tclass, ip6_make_flowlabel(net, skb, fl6->flowlabel,
						     np->autoflowlabel, fl6));

	hdr->payload_len = htons(seg_len);
	hdr->nexthdr = proto;
	hdr->hop_limit = hlimit;

	hdr->saddr = fl6->saddr;
	hdr->daddr = *first_hop;

	skb->protocol = htons(ETH_P_IPV6);
	skb->priority = sk->sk_priority;
	skb->mark = sk->sk_mark;

	mtu = dst_mtu(dst);
	if ((skb->len <= mtu) || skb->ignore_df || skb_is_gso(skb)) {
		IP6_UPD_PO_STATS(net, ip6_dst_idev(skb_dst(skb)),
			      IPSTATS_MIB_OUT, skb->len);
		/* hooks should never assume socket lock is held.
		 * we promote our socket to non const
		 */
		return NF_HOOK(NFPROTO_IPV6, NF_INET_LOCAL_OUT,
			       net, (struct sock *)sk, skb, NULL, dst->dev,
			       dst_output);
	}

	skb->dev = dst->dev;
	/* ipv6_local_error() does not require socket lock,
	 * we promote our socket to non const
	 */
	ipv6_local_error((struct sock *)sk, EMSGSIZE, fl6, mtu);

	IP6_INC_STATS(net, ip6_dst_idev(skb_dst(skb)), IPSTATS_MIB_FRAGFAILS);
	kfree_skb(skb);
	return -EMSGSIZE;
}

开发者ID:guanhe0，项目名称:kernel，代码行数:98，代码来源:ip6_output.c

注：本文中的IP6_UPD_PO_STATS函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ IPAddress函数代码示例发布时间：2022-05-30

C++ IP6_INC_STATS_BH函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19220|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9996|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8331|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8700|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8644|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9666|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8630|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：8004|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8664|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7539|2022-11-06

客服电话

电子邮件

C++ IP6_UPD_PO_STATS函数代码示例

示例1: ip6_finish_output2

示例2: ndisc_send_skb

示例3: ndisc_send_skb

示例4: ip6_output2

示例5: ip6_xmit

示例6: ip6_push_pending_frames

示例7: ip6_finish_output2

示例8: inet6_sk

示例9: ip6_xmit

请发表评论

全部评论

上一篇：

下一篇：

krishnaik06/Machine-Learning-in-90-days

谈谈matlab中的uint8和double（转） - Rege

armancodv/building-energy-model-matlab:

美元符号为什么是“$”

FGRibreau/import-tweets-to-mastodon: How

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053