• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号

C++ IP6_INC_STATS_BH函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中IP6_INC_STATS_BH函数的典型用法代码示例。如果您正苦于以下问题:C++ IP6_INC_STATS_BH函数的具体用法?C++ IP6_INC_STATS_BH怎么用?C++ IP6_INC_STATS_BH使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了IP6_INC_STATS_BH函数的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: ipv6_rcv

int ipv6_rcv(struct sk_buff *skb, struct net_device *dev, struct packet_type *pt, struct net_device *orig_dev)
{
	const struct ipv6hdr *hdr;
	u32 		pkt_len;
	struct inet6_dev *idev;
	struct net *net = dev_net(skb->dev);

	if (skb->pkt_type == PACKET_OTHERHOST) {
		kfree_skb(skb);
		return NET_RX_DROP;
	}

	rcu_read_lock();

	idev = __in6_dev_get(skb->dev);

	IP6_UPD_PO_STATS_BH(net, idev, IPSTATS_MIB_IN, skb->len);

	if ((skb = skb_share_check(skb, GFP_ATOMIC)) == NULL ||
	    !idev || unlikely(idev->cnf.disable_ipv6)) {
		IP6_INC_STATS_BH(net, idev, IPSTATS_MIB_INDISCARDS);
		goto drop;
	}

	memset(IP6CB(skb), 0, sizeof(struct inet6_skb_parm));

	/*
	 * Store incoming device index. When the packet will
	 * be queued, we cannot refer to skb->dev anymore.
	 *
	 * BTW, when we send a packet for our own local address on a
	 * non-loopback interface (e.g. ethX), it is being delivered
	 * via the loopback interface (lo) here; skb->dev = loopback_dev.
	 * It, however, should be considered as if it is being
	 * arrived via the sending interface (ethX), because of the
	 * nature of scoping architecture. --yoshfuji
	 */
	IP6CB(skb)->iif = skb_dst(skb) ? ip6_dst_idev(skb_dst(skb))->dev->ifindex : dev->ifindex;

	if (unlikely(!pskb_may_pull(skb, sizeof(*hdr))))
		goto err;

	hdr = ipv6_hdr(skb);

	if (hdr->version != 6)
		goto err;

	/*
	 * RFC4291 2.5.3
	 * A packet received on an interface with a destination address
	 * of loopback must be dropped.
	 */
	if (!(dev->flags & IFF_LOOPBACK) &&
	    ipv6_addr_loopback(&hdr->daddr))
		goto err;

	/* RFC4291 2.7
	 * Nodes must not originate a packet to a multicast address whose scope
	 * field contains the reserved value 0; if such a packet is received, it
	 * must be silently dropped.
	 */
	if (ipv6_addr_is_multicast(&hdr->daddr) &&
	    IPV6_ADDR_MC_SCOPE(&hdr->daddr) == 0)
		goto err;

	/*
	 * RFC4291 2.7
	 * Multicast addresses must not be used as source addresses in IPv6
	 * packets or appear in any Routing header.
	 */
	if (ipv6_addr_is_multicast(&hdr->saddr))
		goto err;

	skb->transport_header = skb->network_header + sizeof(*hdr);
	IP6CB(skb)->nhoff = offsetof(struct ipv6hdr, nexthdr);

	pkt_len = ntohs(hdr->payload_len);

	/* pkt_len may be zero if Jumbo payload option is present */
	if (pkt_len || hdr->nexthdr != NEXTHDR_HOP) {
		if (pkt_len + sizeof(struct ipv6hdr) > skb->len) {
			IP6_INC_STATS_BH(net,
					 idev, IPSTATS_MIB_INTRUNCATEDPKTS);
			goto drop;
		}
		if (pskb_trim_rcsum(skb, pkt_len + sizeof(struct ipv6hdr))) {
			IP6_INC_STATS_BH(net, idev, IPSTATS_MIB_INHDRERRORS);
			goto drop;
		}
		hdr = ipv6_hdr(skb);
	}

	if (hdr->nexthdr == NEXTHDR_HOP) {
		if (ipv6_parse_hopopts(skb) < 0) {
			IP6_INC_STATS_BH(net, idev, IPSTATS_MIB_INHDRERRORS);
			rcu_read_unlock();
			return NET_RX_DROP;
		}
	}

//.........这里部分代码省略.........
开发者ID:Babel-builder,项目名称:linux,代码行数:101,代码来源:ip6_input.c


示例2: ipv6_rcv

int ipv6_rcv(struct sk_buff *skb, struct net_device *dev, struct packet_type *pt)
{
	struct ipv6hdr *hdr;
	u32 		pkt_len;

	if (skb->pkt_type == PACKET_OTHERHOST)
		goto drop;

	IP6_INC_STATS_BH(IPSTATS_MIB_INRECEIVES);

	if ((skb = skb_share_check(skb, GFP_ATOMIC)) == NULL) {
		IP6_INC_STATS_BH(IPSTATS_MIB_INDISCARDS);
		goto out;
	}

	/*
	 * Store incoming device index. When the packet will
	 * be queued, we cannot refer to skb->dev anymore.
	 *
	 * BTW, when we send a packet for our own local address on a
	 * non-loopback interface (e.g. ethX), it is being delivered
	 * via the loopback interface (lo) here; skb->dev = &loopback_dev.
	 * It, however, should be considered as if it is being
	 * arrived via the sending interface (ethX), because of the
	 * nature of scoping architecture. --yoshfuji
	 */
	IP6CB(skb)->iif = skb->dst ? ((struct rt6_info *)skb->dst)->rt6i_idev->dev->ifindex : dev->ifindex;

	if (skb->len < sizeof(struct ipv6hdr))
		goto err;

	if (!pskb_may_pull(skb, sizeof(struct ipv6hdr))) {
		IP6_INC_STATS_BH(IPSTATS_MIB_INHDRERRORS);
		goto drop;
	}

	hdr = skb->nh.ipv6h;

	if (hdr->version != 6)
		goto err;

	pkt_len = ntohs(hdr->payload_len);

	/* pkt_len may be zero if Jumbo payload option is present */
	if (pkt_len || hdr->nexthdr != NEXTHDR_HOP) {
		if (pkt_len + sizeof(struct ipv6hdr) > skb->len)
			goto truncated;
		if (pskb_trim_rcsum(skb, pkt_len + sizeof(struct ipv6hdr))) {
			IP6_INC_STATS_BH(IPSTATS_MIB_INHDRERRORS);
			goto drop;
		}
		hdr = skb->nh.ipv6h;
	}

	if (hdr->nexthdr == NEXTHDR_HOP) {
		skb->h.raw = (u8*)(hdr+1);
		if (ipv6_parse_hopopts(skb, offsetof(struct ipv6hdr, nexthdr)) < 0) {
			IP6_INC_STATS_BH(IPSTATS_MIB_INHDRERRORS);
			return 0;
		}
		hdr = skb->nh.ipv6h;
	}
开发者ID:OpenHMR,项目名称:Open-HMR600,代码行数:62,代码来源:ip6_input.c


示例3: ip6_finish_output2

static int ip6_finish_output2(struct sk_buff *skb)
{
	struct dst_entry *dst = skb_dst(skb);
	struct net_device *dev = dst->dev;
	struct neighbour *neigh;
	int res;

	skb->protocol = htons(ETH_P_IPV6);
	skb->dev = dev;

	if (ipv6_addr_is_multicast(&ipv6_hdr(skb)->daddr)) {
		struct inet6_dev *idev = ip6_dst_idev(skb_dst(skb));

		if (!(dev->flags & IFF_LOOPBACK) && sk_mc_loop(skb->sk) &&
		    ((mroute6_socket(dev_net(dev), skb) &&
		     !(IP6CB(skb)->flags & IP6SKB_FORWARDED)) ||
		     ipv6_chk_mcast_addr(dev, &ipv6_hdr(skb)->daddr,
					 &ipv6_hdr(skb)->saddr))) {
			struct sk_buff *newskb = skb_clone(skb, GFP_ATOMIC);

			/* Do not check for IFF_ALLMULTI; multicast routing
			   is not supported in any case.
			 */
			if (newskb)
				NF_HOOK(NFPROTO_IPV6, NF_INET_POST_ROUTING,
					newskb, NULL, newskb->dev,
					ip6_dev_loopback_xmit);

			if (ipv6_hdr(skb)->hop_limit == 0) {
				IP6_INC_STATS(dev_net(dev), idev,
					      IPSTATS_MIB_OUTDISCARDS);
				kfree_skb(skb);
				return 0;
			}
		}

		IP6_UPD_PO_STATS(dev_net(dev), idev, IPSTATS_MIB_OUTMCAST,
				skb->len);
	}

	rcu_read_lock();
	if (dst->hh) {
		res = neigh_hh_output(dst->hh, skb);

		rcu_read_unlock();
		return res;
	} else {
		neigh = dst_get_neighbour(dst);
		if (neigh) {
			res = neigh->output(skb);

			rcu_read_unlock();
			return res;
		}
		rcu_read_unlock();
	}

	IP6_INC_STATS_BH(dev_net(dst->dev),
			 ip6_dst_idev(dst), IPSTATS_MIB_OUTNOROUTES);
	kfree_skb(skb);
	return -EINVAL;
}
开发者ID:FreeProjectAce,项目名称:protou_kernel,代码行数:62,代码来源:ip6_output.c


示例4: ip6_frag_queue

static int ip6_frag_queue(struct frag_queue *fq, struct sk_buff *skb,
			   struct frag_hdr *fhdr, int nhoff)
{
	struct sk_buff *prev, *next;
	struct net_device *dev;
	int offset, end;
	struct net *net = dev_net(skb_dst(skb)->dev);

	if (fq->q.last_in & INET_FRAG_COMPLETE)
		goto err;

	offset = ntohs(fhdr->frag_off) & ~0x7;
	end = offset + (ntohs(ipv6_hdr(skb)->payload_len) -
			((u8 *)(fhdr + 1) - (u8 *)(ipv6_hdr(skb) + 1)));

	if ((unsigned int)end > IPV6_MAXPLEN) {
		IP6_INC_STATS_BH(net, ip6_dst_idev(skb_dst(skb)),
				 IPSTATS_MIB_INHDRERRORS);
		icmpv6_param_prob(skb, ICMPV6_HDR_FIELD,
				  ((u8 *)&fhdr->frag_off -
				   skb_network_header(skb)));
		return -1;
	}

	if (skb->ip_summed == CHECKSUM_COMPLETE) {
		const unsigned char *nh = skb_network_header(skb);
		skb->csum = csum_sub(skb->csum,
				     csum_partial(nh, (u8 *)(fhdr + 1) - nh,
						  0));
	}

	/* Is this the final fragment? */
	if (!(fhdr->frag_off & htons(IP6_MF))) {
		/* If we already have some bits beyond end
		 * or have different end, the segment is corrupted.
		 */
		if (end < fq->q.len ||
		    ((fq->q.last_in & INET_FRAG_LAST_IN) && end != fq->q.len))
			goto err;
		fq->q.last_in |= INET_FRAG_LAST_IN;
		fq->q.len = end;
	} else {
		/* Check if the fragment is rounded to 8 bytes.
		 * Required by the RFC.
		 */
		if (end & 0x7) {
			/* RFC2460 says always send parameter problem in
			 * this case. -DaveM
			 */
			IP6_INC_STATS_BH(net, ip6_dst_idev(skb_dst(skb)),
					 IPSTATS_MIB_INHDRERRORS);
			icmpv6_param_prob(skb, ICMPV6_HDR_FIELD,
					  offsetof(struct ipv6hdr, payload_len));
			return -1;
		}
		if (end > fq->q.len) {
			/* Some bits beyond end -> corruption. */
			if (fq->q.last_in & INET_FRAG_LAST_IN)
				goto err;
			fq->q.len = end;
		}
	}

	if (end == offset)
		goto err;

	/* Point into the IP datagram 'data' part. */
	if (!pskb_pull(skb, (u8 *) (fhdr + 1) - skb->data))
		goto err;

	if (pskb_trim_rcsum(skb, end - offset))
		goto err;

	/* Find out which fragments are in front and at the back of us
	 * in the chain of fragments so far.  We must know where to put
	 * this fragment, right?
	 */
	prev = fq->q.fragments_tail;
	if (!prev || FRAG6_CB(prev)->offset < offset) {
		next = NULL;
		goto found;
	}
	prev = NULL;
	for(next = fq->q.fragments; next != NULL; next = next->next) {
		if (FRAG6_CB(next)->offset >= offset)
			break;	/* bingo! */
		prev = next;
	}

found:
	/* RFC5722, Section 4, amended by Errata ID : 3089
	 *                          When reassembling an IPv6 datagram, if
	 *   one or more its constituent fragments is determined to be an
	 *   overlapping fragment, the entire datagram (and any constituent
	 *   fragments) MUST be silently discarded.
	 */

	/* Check for overlap with preceding fragment. */
	if (prev &&
	    (FRAG6_CB(prev)->offset + prev->len) > offset)
//.........这里部分代码省略.........
开发者ID:andy-padavan,项目名称:rt-n56u,代码行数:101,代码来源:reassembly.c


示例5: ip6_frag_queue

static int ip6_frag_queue(struct frag_queue *fq, struct sk_buff *skb,
			   struct frag_hdr *fhdr, int nhoff)
{
	struct sk_buff *prev, *next;
	struct net_device *dev;
	int offset, end;
	struct net *net = dev_net(skb_dst(skb)->dev);

	if (fq->q.last_in & INET_FRAG_COMPLETE)
		goto err;

	offset = ntohs(fhdr->frag_off) & ~0x7;
	end = offset + (ntohs(ipv6_hdr(skb)->payload_len) -
			((u8 *)(fhdr + 1) - (u8 *)(ipv6_hdr(skb) + 1)));

	if ((unsigned int)end > IPV6_MAXPLEN) {
		IP6_INC_STATS_BH(net, ip6_dst_idev(skb_dst(skb)),
				 IPSTATS_MIB_INHDRERRORS);
		icmpv6_param_prob(skb, ICMPV6_HDR_FIELD,
				  ((u8 *)&fhdr->frag_off -
				   skb_network_header(skb)));
		return -1;
	}

	if (skb->ip_summed == CHECKSUM_COMPLETE) {
		const unsigned char *nh = skb_network_header(skb);
		skb->csum = csum_sub(skb->csum,
				     csum_partial(nh, (u8 *)(fhdr + 1) - nh,
						  0));
	}

	
	if (!(fhdr->frag_off & htons(IP6_MF))) {
		if (end < fq->q.len ||
		    ((fq->q.last_in & INET_FRAG_LAST_IN) && end != fq->q.len))
			goto err;
		fq->q.last_in |= INET_FRAG_LAST_IN;
		fq->q.len = end;
	} else {
		if (end & 0x7) {
			IP6_INC_STATS_BH(net, ip6_dst_idev(skb_dst(skb)),
					 IPSTATS_MIB_INHDRERRORS);
			icmpv6_param_prob(skb, ICMPV6_HDR_FIELD,
					  offsetof(struct ipv6hdr, payload_len));
			return -1;
		}
		if (end > fq->q.len) {
			
			if (fq->q.last_in & INET_FRAG_LAST_IN)
				goto err;
			fq->q.len = end;
		}
	}

	if (end == offset)
		goto err;

	
	if (!pskb_pull(skb, (u8 *) (fhdr + 1) - skb->data))
		goto err;

	if (pskb_trim_rcsum(skb, end - offset))
		goto err;

	prev = fq->q.fragments_tail;
	if (!prev || FRAG6_CB(prev)->offset < offset) {
		next = NULL;
		goto found;
	}
	prev = NULL;
	for(next = fq->q.fragments; next != NULL; next = next->next) {
		if (FRAG6_CB(next)->offset >= offset)
			break;	
		prev = next;
	}

found:

	
	if (prev &&
	    (FRAG6_CB(prev)->offset + prev->len) > offset)
		goto discard_fq;

	
	if (next && FRAG6_CB(next)->offset < end)
		goto discard_fq;

	FRAG6_CB(skb)->offset = offset;

	
	skb->next = next;
	if (!next)
		fq->q.fragments_tail = skb;
	if (prev)
		prev->next = skb;
	else
		fq->q.fragments = skb;

	dev = skb->dev;
	if (dev) {
//.........这里部分代码省略.........
开发者ID:Albinoman887,项目名称:pyramid-3.4.10,代码行数:101,代码来源:reassembly.c


示例6: ip6_forward

int ip6_forward(struct sk_buff *skb)
{
	struct dst_entry *dst = skb_dst(skb);
	struct ipv6hdr *hdr = ipv6_hdr(skb);
	struct inet6_skb_parm *opt = IP6CB(skb);
	struct net *net = dev_net(dst->dev);

	if (net->ipv6.devconf_all->forwarding == 0)
		goto error;

	if (skb_warn_if_lro(skb))
		goto drop;

	if (!xfrm6_policy_check(NULL, XFRM_POLICY_FWD, skb)) {
		IP6_INC_STATS(net, ip6_dst_idev(dst), IPSTATS_MIB_INDISCARDS);
		goto drop;
	}

	if (skb->pkt_type != PACKET_HOST)
		goto drop;

	skb_forward_csum(skb);

	/*
	 *	We DO NOT make any processing on
	 *	RA packets, pushing them to user level AS IS
	 *	without ane WARRANTY that application will be able
	 *	to interpret them. The reason is that we
	 *	cannot make anything clever here.
	 *
	 *	We are not end-node, so that if packet contains
	 *	AH/ESP, we cannot make anything.
	 *	Defragmentation also would be mistake, RA packets
	 *	cannot be fragmented, because there is no warranty
	 *	that different fragments will go along one path. --ANK
	 */
	if (opt->ra) {
		u8 *ptr = skb_network_header(skb) + opt->ra;
		if (ip6_call_ra_chain(skb, (ptr[2]<<8) + ptr[3]))
			return 0;
	}

	/*
	 *	check and decrement ttl
	 */
	if (hdr->hop_limit <= 1) {
		/* Force OUTPUT device used as source address */
		skb->dev = dst->dev;
		icmpv6_send(skb, ICMPV6_TIME_EXCEED, ICMPV6_EXC_HOPLIMIT,
			    0, skb->dev);
		IP6_INC_STATS_BH(net,
				 ip6_dst_idev(dst), IPSTATS_MIB_INHDRERRORS);

		kfree_skb(skb);
		return -ETIMEDOUT;
	}

	/* XXX: idev->cnf.proxy_ndp? */
	if (net->ipv6.devconf_all->proxy_ndp &&
	    pneigh_lookup(&nd_tbl, net, &hdr->daddr, skb->dev, 0)) {
		int proxied = ip6_forward_proxy_check(skb);
		if (proxied > 0)
			return ip6_input(skb);
		else if (proxied < 0) {
			IP6_INC_STATS(net, ip6_dst_idev(dst),
				      IPSTATS_MIB_INDISCARDS);
			goto drop;
		}
	}

	if (!xfrm6_route_forward(skb)) {
		IP6_INC_STATS(net, ip6_dst_idev(dst), IPSTATS_MIB_INDISCARDS);
		goto drop;
	}
	dst = skb_dst(skb);

	/* IPv6 specs say nothing about it, but it is clear that we cannot
	   send redirects to source routed frames.
	   We don't send redirects to frames decapsulated from IPsec.
	 */
	if (skb->dev == dst->dev && dst->neighbour && opt->srcrt == 0 &&
	    !skb_sec_path(skb)) {
		struct in6_addr *target = NULL;
		struct rt6_info *rt;
		struct neighbour *n = dst->neighbour;

		/*
		 *	incoming and outgoing devices are the same
		 *	send a redirect.
		 */

		rt = (struct rt6_info *) dst;
		if ((rt->rt6i_flags & RTF_GATEWAY))
			target = (struct in6_addr*)&n->primary_key;
		else
			target = &hdr->daddr;

		/* Limit redirects both by destination (here)
		   and by source (inside ndisc_send_redirect)
		 */
//.........这里部分代码省略.........
开发者ID:vps2fast,项目名称:openvz-kernel,代码行数:101,代码来源:ip6_output.c


示例7: ipv6_rcv

int ipv6_rcv(struct sk_buff *skb, struct net_device *dev, struct packet_type *pt, struct net_device *orig_dev)
{
	struct ipv6hdr *hdr;
	u32 		pkt_len;
	struct inet6_dev *idev;

	if (skb->pkt_type == PACKET_OTHERHOST) {
		kfree_skb(skb);
		return 0;
	}

	rcu_read_lock();

	idev = __in6_dev_get(skb->dev);

	IP6_INC_STATS_BH(idev, IPSTATS_MIB_INRECEIVES);

	if ((skb = skb_share_check(skb, GFP_ATOMIC)) == NULL ||
	    !idev || unlikely(idev->cnf.disable_ipv6)) {
		IP6_INC_STATS_BH(idev, IPSTATS_MIB_INDISCARDS);
		goto drop;
	}

	memset(IP6CB(skb), 0, sizeof(struct inet6_skb_parm));

	/*
	 * Store incoming device index. When the packet will
	 * be queued, we cannot refer to skb->dev anymore.
	 *
	 * BTW, when we send a packet for our own local address on a
	 * non-loopback interface (e.g. ethX), it is being delivered
	 * via the loopback interface (lo) here; skb->dev = &loopback_dev.
	 * It, however, should be considered as if it is being
	 * arrived via the sending interface (ethX), because of the
	 * nature of scoping architecture. --yoshfuji
	 */
	IP6CB(skb)->iif = skb->dst ? ip6_dst_idev(skb->dst)->dev->ifindex : dev->ifindex;

	if (unlikely(!pskb_may_pull(skb, sizeof(*hdr))))
		goto err;

	hdr = ipv6_hdr(skb);

	if (hdr->version != 6)
		goto err;

	skb->transport_header = skb->network_header + sizeof(*hdr);
	IP6CB(skb)->nhoff = offsetof(struct ipv6hdr, nexthdr);

	pkt_len = ntohs(hdr->payload_len);

	/* pkt_len may be zero if Jumbo payload option is present */
	if (pkt_len || hdr->nexthdr != NEXTHDR_HOP) {
		if (pkt_len + sizeof(struct ipv6hdr) > skb->len) {
			IP6_INC_STATS_BH(idev, IPSTATS_MIB_INTRUNCATEDPKTS);
			goto drop;
		}
		if (pskb_trim_rcsum(skb, pkt_len + sizeof(struct ipv6hdr))) {
			IP6_INC_STATS_BH(idev, IPSTATS_MIB_INHDRERRORS);
			goto drop;
		}
		hdr = ipv6_hdr(skb);
	}

	if (hdr->nexthdr == NEXTHDR_HOP) {
		if (ipv6_parse_hopopts(skb) < 0) {
			IP6_INC_STATS_BH(idev, IPSTATS_MIB_INHDRERRORS);
			rcu_read_unlock();
			return 0;
		}
	}

	rcu_read_unlock();

	return NF_HOOK(PF_INET6,NF_IP6_PRE_ROUTING, skb, dev, NULL, ip6_rcv_finish);
err:
	IP6_INC_STATS_BH(idev, IPSTATS_MIB_INHDRERRORS);
drop:
	rcu_read_unlock();
	kfree_skb(skb);
	return 0;
}
开发者ID:ECRS,项目名称:Asus-RT-N16,代码行数:82,代码来源:ip6_input.c


示例8: ip6_mc_input

int ip6_mc_input(struct sk_buff *skb)
{
	struct ipv6hdr *hdr;
	int deliver;

	IP6_INC_STATS_BH(ip6_dst_idev(skb->dst), IPSTATS_MIB_INMCASTPKTS);

	hdr = ipv6_hdr(skb);
	deliver = ipv6_chk_mcast_addr(skb->dev, &hdr->daddr, NULL);

#ifdef CONFIG_IPV6_MROUTE
	/*
	 *      IPv6 multicast router mode is now supported ;)
	 */
	if (dev_net(skb->dev)->ipv6.devconf_all->mc_forwarding &&
	    likely(!(IP6CB(skb)->flags & IP6SKB_FORWARDED))) {
		/*
		 * Okay, we try to forward - split and duplicate
		 * packets.
		 */
		struct sk_buff *skb2;
		struct inet6_skb_parm *opt = IP6CB(skb);

		/* Check for MLD */
		if (unlikely(opt->ra)) {
			/* Check if this is a mld message */
			u8 *ptr = skb_network_header(skb) + opt->ra;
			struct icmp6hdr *icmp6;
			u8 nexthdr = hdr->nexthdr;
			int offset;

			/* Check if the value of Router Alert
			 * is for MLD (0x0000).
			 */
			if ((ptr[2] | ptr[3]) == 0) {
				deliver = 0;

				if (!ipv6_ext_hdr(nexthdr)) {
					/* BUG */
					goto out;
				}
				offset = ipv6_skip_exthdr(skb, sizeof(*hdr),
							  &nexthdr);
				if (offset < 0)
					goto out;

				if (nexthdr != IPPROTO_ICMPV6)
					goto out;

				if (!pskb_may_pull(skb, (skb_network_header(skb) +
						   offset + 1 - skb->data)))
					goto out;

				icmp6 = (struct icmp6hdr *)(skb_network_header(skb) + offset);

				switch (icmp6->icmp6_type) {
				case ICMPV6_MGM_QUERY:
				case ICMPV6_MGM_REPORT:
				case ICMPV6_MGM_REDUCTION:
				case ICMPV6_MLD2_REPORT:
					deliver = 1;
					break;
				}
				goto out;
			}
			/* unknown RA - process it normally */
		}

		if (deliver)
			skb2 = skb_clone(skb, GFP_ATOMIC);
		else {
			skb2 = skb;
			skb = NULL;
		}

		if (skb2) {
			skb2->dev = skb2->dst->dev;
			ip6_mr_input(skb2);
		}
	}
out:
#endif
	if (likely(deliver))
		ip6_input(skb);
	else {
		/* discard */
		kfree_skb(skb);
	}

	return 0;
}
开发者ID:deepikateriar,项目名称:Onlive-Source-Backup,代码行数:91,代码来源:ip6_input.c


示例9: ipv6_rcv

int ipv6_rcv(struct sk_buff *skb, struct net_device *dev, struct packet_type *pt, struct net_device *orig_dev)
{
	struct ipv6hdr *hdr;
	u32 		pkt_len;
	struct inet6_dev *idev;

	if (skb->pkt_type == PACKET_OTHERHOST)
		goto drop;

	rcu_read_lock();

	idev = __in6_dev_get(skb->dev);

	IP6_INC_STATS_BH(IPSTATS_MIB_INRECEIVES);
	
	/* purpose     : CONFIG_IPV6    author : ChunRu    date : 2011-04-21  */	
	/* description : add dad failure to hw addr mechanism                          */
	if ((skb = skb_share_check(skb, GFP_ATOMIC)) == NULL ||
	    !idev || unlikely(idev->cnf.disable_ipv6)) 
	{
		IP6_INC_STATS_BH(IPSTATS_MIB_INDISCARDS);
	/* purpose     : CONFIG_IPV6    author : ChunRu    date : 2011-10-21 */
	/* description : fix memory keeping growing after dad fail           */
		goto drop;
	}

	/*
	 * Store incoming device index. When the packet will
	 * be queued, we cannot refer to skb->dev anymore.
	 *
	 * BTW, when we send a packet for our own local address on a
	 * non-loopback interface (e.g. ethX), it is being delivered
	 * via the loopback interface (lo) here; skb->dev = &loopback_dev.
	 * It, however, should be considered as if it is being
	 * arrived via the sending interface (ethX), because of the
	 * nature of scoping architecture. --yoshfuji
	 */
	IP6CB(skb)->iif = skb->dst ? ((struct rt6_info *)skb->dst)->rt6i_idev->dev->ifindex : dev->ifindex;

	if (skb->len < sizeof(struct ipv6hdr))
		goto err;

	if (!pskb_may_pull(skb, sizeof(struct ipv6hdr))) {
		IP6_INC_STATS_BH(IPSTATS_MIB_INHDRERRORS);
		goto drop;
	}

	hdr = skb->nh.ipv6h;

	if (hdr->version != 6)
		goto err;

	skb->h.raw = (u8 *)(hdr + 1);
	IP6CB(skb)->nhoff = offsetof(struct ipv6hdr, nexthdr);

	pkt_len = ntohs(hdr->payload_len);

	/* pkt_len may be zero if Jumbo payload option is present */
	if (pkt_len || hdr->nexthdr != NEXTHDR_HOP) {
		if (pkt_len + sizeof(struct ipv6hdr) > skb->len)
			goto truncated;
		if (pskb_trim_rcsum(skb, pkt_len + sizeof(struct ipv6hdr))) {
			IP6_INC_STATS_BH(IPSTATS_MIB_INHDRERRORS);
			goto drop;
		}
		hdr = skb->nh.ipv6h;
	}

	if (hdr->nexthdr == NEXTHDR_HOP) {
		if (ipv6_parse_hopopts(skb, IP6CB(skb)->nhoff) < 0) {
			IP6_INC_STATS_BH(IPSTATS_MIB_INHDRERRORS);
			rcu_read_unlock();
			return 0;
		}
		hdr = skb->nh.ipv6h;
	}
	
	rcu_read_unlock();
	
	return NF_HOOK(PF_INET6,NF_IP6_PRE_ROUTING, skb, dev, NULL, ip6_rcv_finish);
truncated:
	IP6_INC_STATS_BH(IPSTATS_MIB_INTRUNCATEDPKTS);
err:
	IP6_INC_STATS_BH(IPSTATS_MIB_INHDRERRORS);
drop:
	rcu_read_unlock();
	kfree_skb(skb);
out:
	return 0;
}
开发者ID:KrisChaplin,项目名称:LRT2x4_v1.0.2.06_GPL_source,代码行数:90,代码来源:ip6_input.c


示例10: ip6_mc_input

int ip6_mc_input(struct sk_buff *skb)
{
	struct ipv6hdr *hdr;
	int deliver;

	IP6_INC_STATS_BH(IPSTATS_MIB_INMCASTPKTS);

	hdr = skb->nh.ipv6h;
	deliver = likely(!(skb->dev->flags & (IFF_PROMISC|IFF_ALLMULTI))) ||
	    ipv6_chk_mcast_addr(skb->dev, &hdr->daddr, NULL);

#ifdef CONFIG_IPV6_MROUTE
	/*
	 *      IPv6 multicast router mode is now supported ;)
	 */

	if ((ipv6_addr_type(&hdr->daddr) & IPV6_ADDR_MULTICAST) && 
	    (IPV6_ADDR_MC_SCOPE(&hdr->daddr) == 0))
		goto out;

	if (ipv6_devconf.mc_forwarding &&	
	    !(ipv6_addr_type(&hdr->daddr) & IPV6_ADDR_LINKLOCAL) &&
	    likely(!(IP6CB(skb)->flags & IP6SKB_FORWARDED))) {
		/*
		 * Okay, we try to forward - split and duplicate
		 * packets.
		 */
		struct sk_buff *skb2;
		struct inet6_skb_parm *opt = IP6CB(skb);

		/* Check for MLD */
		if (unlikely(opt->ra)) {
			/* Check if this is a mld message */
			//u8 *ptr = skb_network_header(skb) + opt->ra;
			u8 *ptr;
			struct icmp6hdr *icmp6;
			u8 nexthdr = hdr->nexthdr;
			int offset;

			ptr = (u8 *) (skb->nh.raw + opt->ra); //chunru: copy from ip6_output
			/* Check if the value of Router Alert
			 * is for MLD (0x0000).
			 */
			if ((ptr[2] | ptr[3]) == 0) {
				deliver = 0;
				if (!ipv6_ext_hdr(nexthdr)) {
					/* BUG */
					goto out;
				}

				offset = ipv6_skip_exthdr(skb, sizeof(*hdr),
							  &nexthdr);
				if (offset < 0)
					goto out;

				if (nexthdr != IPPROTO_ICMPV6)
					goto out;

				if (!pskb_may_pull(skb, (skb->nh.raw + offset + 1 - skb->data)))
					goto out;

				icmp6 = (struct icmp6hdr *)( skb->nh.raw + offset);

				switch (icmp6->icmp6_type) {
				case ICMPV6_MGM_QUERY:
				case ICMPV6_MGM_REPORT:
				case ICMPV6_MGM_REDUCTION:
				case ICMPV6_MLD2_REPORT:
					deliver = 1;
					break;
				}
				goto out;
			}
			/* unknown RA - process it normally */
		}

		if (deliver)
		{
			skb2 = skb_clone(skb, GFP_ATOMIC);
		}
		else {
			skb2 = skb;
			skb = NULL;
		}

		if (skb2) {
			ip6_mr_input(skb2);
		}
	}
out:
#endif
	if (likely(deliver)) {
		ip6_input(skb);
		return 0;
	}
#ifdef CONFIG_IPV6_MROUTE
	else if(skb) {
		/* discard */
		kfree_skb(skb);
	}
//.........这里部分代码省略.........
开发者ID:KrisChaplin,项目名称:LRT2x4_v1.0.2.06_GPL_source,代码行数:101,代码来源:ip6_input.c


示例11: ipv6_rcv

int ipv6_rcv(struct sk_buff *skb, struct net_device *dev, struct packet_type *pt)
{
	struct ipv6hdr *hdr;
	u32 		pkt_len;
	struct inet6_dev *idev = NULL;
	int saddr_type, daddr_type;

	if (skb->pkt_type == PACKET_OTHERHOST)
		goto drop;

	idev = in6_dev_get(dev);

	IP6_INC_STATS_BH(idev,Ip6InReceives);

	if ((skb = skb_share_check(skb, GFP_ATOMIC)) == NULL)
		goto out;

	/* Store incoming device index. When the packet will
	   be queued, we cannot refer to skb->dev anymore.
	 */
	((struct inet6_skb_parm *)skb->cb)->iif = dev->ifindex;

	if (skb->len < sizeof(struct ipv6hdr))
		goto err;

	if (!pskb_may_pull(skb, sizeof(struct ipv6hdr)))
		goto drop;

	hdr = skb->nh.ipv6h;

	if (hdr->version != 6)
		goto err;

	saddr_type = ipv6_addr_type(&hdr->saddr);
	daddr_type = ipv6_addr_type(&hdr->daddr);

	if ((saddr_type & IPV6_ADDR_MULTICAST) ||
	    (daddr_type == IPV6_ADDR_ANY))
		goto drop;	/*XXX*/

	if (((saddr_type & IPV6_ADDR_LOOPBACK) ||
	     (daddr_type & IPV6_ADDR_LOOPBACK)) &&
	     !(dev->flags & IFF_LOOPBACK))
		goto drop;	/*XXX*/

#ifdef CONFIG_IPV6_DROP_FAKE_V4MAPPED
	if (saddr_type == IPV6_ADDR_MAPPED ||
	    daddr_type == IPV6_ADDR_MAPPED)
		goto drop;	/*XXX*/
#endif

	pkt_len = ntohs(hdr->payload_len);

	/* pkt_len may be zero if Jumbo payload option is present */
	if (pkt_len || hdr->nexthdr != NEXTHDR_HOP) {
		if (pkt_len + sizeof(struct ipv6hdr) > skb->len)
			goto truncated;
		if (pkt_len + sizeof(struct ipv6hdr) < skb->len) {
			if (__pskb_trim(skb, pkt_len + sizeof(struct ipv6hdr)))
				goto drop;
			hdr = skb->nh.ipv6h;
			if (skb->ip_summed == CHECKSUM_HW)
				skb->ip_summed = CHECKSUM_NONE;
		}
	}

	if (hdr->nexthdr == NEXTHDR_HOP) {
		skb->h.raw = (u8*)(hdr+1);
		if (ipv6_parse_hopopts(skb, offsetof(struct ipv6hdr, nexthdr)) < 0) {
			IP6_INC_STATS_BH(idev,Ip6InHdrErrors);
			if (idev)
				in6_dev_put(idev);
			return 0;
		}
		hdr = skb->nh.ipv6h;
	}
开发者ID:jameshilliard,项目名称:actiontec_opensrc_mi424wr-rev-ef_fw-20-19-8,代码行数:76,代码来源:ip6_input.c


示例12: ip6_finish_output2

static int ip6_finish_output2(struct sk_buff *skb)
{
	struct dst_entry *dst = skb_dst(skb);
	struct net_device *dev = dst->dev;
	struct neighbour *neigh;
	struct in6_addr *nexthop;
	int ret;

	skb->protocol = htons(ETH_P_IPV6);
	skb->dev = dev;

	if (ipv6_addr_is_multicast(&ipv6_hdr(skb)->daddr)) {
		struct inet6_dev *idev = ip6_dst_idev(skb_dst(skb));

		if (!(dev->flags & IFF_LOOPBACK) && sk_mc_loop(skb->sk) &&
		    ((mroute6_socket(dev_net(dev), skb) &&
		     !(IP6CB(skb)->flags & IP6SKB_FORWARDED)) ||
		     ipv6_chk_mcast_addr(dev, &ipv6_hdr(skb)->daddr,
					 &ipv6_hdr(skb)->saddr))) {
			struct sk_buff *newskb = skb_clone(skb, GFP_ATOMIC);

			/* Do not check for IFF_ALLMULTI; multicast routing
			   is not supported in any case.
			 */
			if (newskb)
				NF_HOOK(NFPROTO_IPV6, NF_INET_POST_ROUTING,
					newskb, NULL, newskb->dev,
					dev_loopback_xmit);

			if (ipv6_hdr(skb)->hop_limit == 0) {
				IP6_INC_STATS(dev_net(dev), idev,
					      IPSTATS_MIB_OUTDISCARDS);
				kfree_skb(skb);
				return 0;
			}
		}

		IP6_UPD_PO_STATS(dev_net(dev), idev, IPSTATS_MIB_OUTMCAST,
				skb->len);

		if (IPV6_ADDR_MC_SCOPE(&ipv6_hdr(skb)->daddr) <=
		    IPV6_ADDR_SCOPE_NODELOCAL &&
		    !(dev->flags & IFF_LOOPBACK)) {
			kfree_skb(skb);
			return 0;
		}
	}

	rcu_read_lock_bh();
	nexthop = rt6_nexthop((struct rt6_info *)dst, &ipv6_hdr(skb)->daddr);
	neigh = __ipv6_neigh_lookup_noref(dst->dev, nexthop);
	if (unlikely(!neigh))
		neigh = __neigh_create(&nd_tbl, nexthop, dst->dev, false);
	if (!IS_ERR(neigh)) {
		ret = dst_neigh_output(dst, neigh, skb);
		rcu_read_unlock_bh();
		return ret;
	}
	rcu_read_unlock_bh();

	IP6_INC_STATS_BH(dev_net(dst->dev),
			 ip6_dst_idev(dst), IPSTATS_MIB_OUTNOROUTES);
	kfree_skb(skb);
	return -EINVAL;
}
开发者ID:rohan07,项目名称:linux,代码行数:65,代码来源:ip6_output.c


示例13: ip6_frag_reasm

static int ip6_frag_reasm(struct frag_queue *fq, struct sk_buff *prev,
			  struct net_device *dev)
{
	struct net *net = container_of(fq->q.net, struct net, ipv6.frags);
	struct sk_buff *fp, *head = fq->q.fragments;
	int    payload_len;
	unsigned int nhoff;

	fq_kill(fq);

	
	if (prev) {
		head = prev->next;
		fp = skb_clone(head, GFP_ATOMIC);

		if (!fp)
			goto out_oom;

		fp->next = head->next;
		if (!fp->next)
			fq->q.fragments_tail = fp;
		prev->next = fp;

		skb_morph(head, fq->q.fragments);
		head->next = fq->q.fragments->next;

		kfree_skb(fq->q.fragments);
		fq->q.fragments = head;
	}

	WARN_ON(head == NULL);
	WARN_ON(FRAG6_CB(head)->offset != 0);

	
	payload_len = ((head->data - skb_network_header(head)) -
		       sizeof(struct ipv6hdr) + fq->q.len -
		       sizeof(struct frag_hdr));
	if (payload_len > IPV6_MAXPLEN)
		goto out_oversize;

	
	if (skb_cloned(head) && pskb_expand_head(head, 0, 0, GFP_ATOMIC))
		goto out_oom;

	if (skb_has_frag_list(head)) {
		struct sk_buff *clone;
		int i, plen = 0;

		if ((clone = alloc_skb(0, GFP_ATOMIC)) == NULL)
			goto out_oom;
		clone->next = head->next;
		head->next = clone;
		skb_shinfo(clone)->frag_list = skb_shinfo(head)->frag_list;
		skb_frag_list_init(head);
		for (i = 0; i < skb_shinfo(head)->nr_frags; i++)
			plen += skb_frag_size(&skb_shinfo(head)->frags[i]);
		clone->len = clone->data_len = head->data_len - plen;
		head->data_len -= clone->len;
		head->len -= clone->len;
		clone->csum = 0;
		clone->ip_summed = head->ip_summed;
		atomic_add(clone->truesize, &fq->q.net->mem);
	}

	nhoff = fq->nhoffset;
	skb_network_header(head)[nhoff] = skb_transport_header(head)[0];
	memmove(head->head + sizeof(struct frag_hdr), head->head,
		(head->data - head->head) - sizeof(struct frag_hdr));
	head->mac_header += sizeof(struct frag_hdr);
	head->network_header += sizeof(struct frag_hdr);

	skb_shinfo(head)->frag_list = head->next;
	skb_reset_transport_header(head);
	skb_push(head, head->data - skb_network_header(head));

	for (fp=head->next; fp; fp = fp->next) {
		head->data_len += fp->len;
		head->len += fp->len;
		if (head->ip_summed != fp->ip_summed)
			head->ip_summed = CHECKSUM_NONE;
		else if (head->ip_summed == CHECKSUM_COMPLETE)
			head->csum = csum_add(head->csum, fp->csum);
		head->truesize += fp->truesize;
	}
	atomic_sub(head->truesize, &fq->q.net->mem);

	head->next = NULL;
	head->dev = dev;
	head->tstamp = fq->q.stamp;
	ipv6_hdr(head)->payload_len = htons(payload_len);
	IP6CB(head)->nhoff = nhoff;

	
	if (head->ip_summed == CHECKSUM_COMPLETE)
		head->csum = csum_partial(skb_network_header(head),
					  skb_network_header_len(head),
					  head->csum);

	rcu_read_lock();
	IP6_INC_STATS_BH(net, __in6_dev_get(dev), IPSTATS_MIB_REASMOKS);
//.........这里部分代码省略.........
开发者ID:Albinoman887,项目名称:pyramid-3.4.10,代码行数:101,代码来源:reassembly.c


示例14: ip6_dst_lookup_tail

static int ip6_dst_lookup_tail(struct sock *sk,
			       struct dst_entry **dst, struct flowi6 *fl6)
{
	struct net *net = sock_net(sk);
#ifdef CONFIG_IPV6_OPTIMISTIC_DAD
	struct neighbour *n;
	struct rt6_info *rt;
#endif
	int err;

	if (*dst == NULL)
		*dst = ip6_route_output(net, sk, fl6);

	if ((err = (*dst)->error))
		goto out_err_release;

	if (ipv6_addr_any(&fl6->saddr)) {
		struct rt6_info *rt = (struct rt6_info *) *dst;
		err = ip6_route_get_saddr(net, rt, &fl6->daddr,
					  sk ? inet6_sk(sk)->srcprefs : 0,
					  &fl6->saddr);
		if (err)
			goto out_err_release;
	}

#ifdef CONFIG_IPV6_OPTIMISTIC_DAD
	/*
	 * Here if the dst entry we've looked up
	 * has a neighbour entry that is in the INCOMPLETE
	 * state and the src address from the flow is
	 * marked as OPTIMISTIC, we release the found
	 * dst entry and replace it instead with the
	 * dst entry of the nexthop router
	 */
	rt = (struct rt6_info *) *dst;
	rcu_read_lock_bh();
	n = __ipv6_neigh_lookup_noref(rt->dst.dev, rt6_nexthop(rt, &fl6->daddr));
	err = n && !(n->nud_state & NUD_VALID) ? -EINVAL : 0;
	rcu_read_unlock_bh();

	if (err) {
		struct inet6_ifaddr *ifp;
		struct flowi6 fl_gw6;
		int redirect;

		ifp = ipv6_get_ifaddr(net, &fl6->saddr,
				      (*dst)->dev, 1);

		redirect = (ifp && ifp->flags & IFA_F_OPTIMISTIC);
		if (ifp)
			in6_ifa_put(ifp);

		if (redirect) {
			/*
			 * We need to get the dst entry for the
			 * default router instead
			 */
			dst_release(*dst);
			memcpy(&fl_gw6, fl6, sizeof(struct flowi6));
			memset(&fl_gw6.daddr, 0, sizeof(struct in6_addr));
			*dst = ip6_route_output(net, sk, &fl_gw6);
			if ((err = (*dst)->error))
				goto out_err_release;
		}
	}
#endif

	return 0;

out_err_release:
	if (err == -ENETUNREACH)
		IP6_INC_STATS_BH(net, NULL, IPSTATS_MIB_OUTNOROUTES);
	dst_release(*dst);
	*dst = NULL;
	return err;
}
开发者ID:rohan07,项目名称:linux,代码行数:76,代码来源:ip6_output.c


示例15: ip6_frag_reasm


//.........这里部分代码省略.........
	int    nhoff;

	fq_kill(fq);

	BUG_TRAP(head != NULL);
	BUG_TRAP(FRAG6_CB(head)->offset == 0);

	/* Unfragmented part is taken from the first segment. */
	payload_len = (head->data - head->nh.raw) - sizeof(struct ipv6hdr) + fq->len;
	nhoff = head->h.raw - head->nh.raw;

	if (payload_len > 65535) {
		payload_len -= 8;
		if (payload_len > 65535)
			goto out_oversize;
		remove_fraghdr = 1;
	}

	/* Head of list must not be cloned. */
	if (skb_cloned(head) && pskb_expand_head(head, 0, 0, GFP_ATOMIC))
		goto out_oom;

	/* If the first fragment is fragmented itself, we split
	 * it to two chunks: the first with data and paged part
	 * and the second, holding only fragments. */
	if (skb_shinfo(head)->frag_list) {
		struct sk_buff *clone;
		int i, plen = 0;

		if ((clone = alloc_skb(0, GFP_ATOMIC)) == NULL)
			goto out_oom;
		clone->next = head->next;
		head->next = clone;
		skb_shinfo(clone)->frag_list = skb_shinfo(head)->frag_list;
		skb_shinfo(head)->frag_list = NULL;
		for (i=0; i<skb_shinfo(head)->nr_frags; i++)
			plen += skb_shinfo(head)->frags[i].size;
		clone->len = clone->data_len = head->data_len - plen;
		head->data_len -= clone->len;
		head->len -= clone->len;
		clone->csum = 0;
		clone->ip_summed = head->ip_summed;
		atomic_add(clone->truesize, &ip6_frag_mem);
	}

	/* Normally we do not remove frag header from datagram, but
	 * we have to do this and to relocate header, when payload
	 * is > 65535-8. */
	if (remove_fraghdr) {
		nhoff = fq->nhoffset;
		head->nh.raw[nhoff] = head->h.raw[0];
		memmove(head->head+8, head->head, (head->data-head->head)-8);
		head->mac.raw += 8;
		head->nh.raw += 8;
	} else {
		((struct frag_hdr*)head->h.raw)->frag_off = 0;
	}

	skb_shinfo(head)->frag_list = head->next;
	head->h.raw = head->data;
	skb_push(head, head->data - head->nh.raw);
	atomic_sub(head->truesize, &ip6_frag_mem);

	for (fp=head->next; fp; fp = fp->next) {
		head->data_len += fp->len;
		head->len += fp->len;
		if (head->ip_summed != fp->ip_summed)
			head->ip_summed = CHECKSUM_NONE;
		else if (head->ip_summed == CHECKSUM_HW)
			head->csum = csum_add(head->csum, fp->csum);
		head->truesize += fp->truesize;
		atomic_sub(fp->truesize, &ip6_frag_mem);
	}

	head->next = NULL;
	head->dev = dev;
	head->stamp = fq->stamp;
	head->nh.ipv6h->payload_len = ntohs(payload_len);

	*skb_in = head;

	/* Yes, and fold redundant checksum back. 8) */
	if (head->ip_summed == CHECKSUM_HW)
		head->csum = csum_partial(head->nh.raw, head->h.raw-head->nh.raw, head->csum);

	IP6_INC_STATS_BH(Ip6ReasmOKs);
	fq->fragments = NULL;
	return nhoff;

out_oversize:
	if (net_ratelimit())
		printk(KERN_DEBUG "ip6_frag_reasm: payload len = %d\n", payload_len);
	goto out_fail;
out_oom:
	if (net_ratelimit())
		printk(KERN_DEBUG "ip6_frag_reasm: no memory for reassembly\n");
out_fail:
	IP6_INC_STATS_BH(Ip6ReasmFails);
	return -1;
}
开发者ID:iwangv,项目名称:edimax-br-6528n,代码行数:101,代码来源:reassembly.c


示例16: ip6_forward

int ip6_forward(struct sk_buff *skb)
{
	struct dst_entry *dst = skb_dst(skb);
	struct ipv6hdr *hdr = ipv6_hdr(skb);
	struct inet6_skb_parm *opt = IP6CB(skb);
	struct net *net = dev_net(dst->dev);
	u32 mtu;

	if (net->ipv6.devconf_all->forwarding == 0)
		goto error;

	if (skb->pkt_type != PACKET_HOST)
		goto drop;

	if (skb_warn_if_lro(skb))
		goto drop;

	if (!xfrm6_policy_check(NULL, XFRM_POLICY_FWD, skb)) {
		IP6_INC_STATS_BH(net, ip6_dst_idev(dst),
				 IPSTATS_MIB_INDISCARDS);
		goto drop;
	}

	skb_forward_csum(skb);

	/*
	 *	We DO NOT make any processing on
	 *	RA packets, pushing them to user level AS IS
	 *	without ane WARRANTY that application will be able
	 *	to interpret them. The reason is that we
	 *	cannot make anything clever here.
	 *
	 *	We are not end-node, so that if packet contains
	 *	AH/ESP, we cannot make anything.
	 *	Defragmentation also would be mistake, RA packets
	 *	cannot be fragmented, because there is no warranty
	 *	that different fragments will go along one path. --ANK
	 */
	if (unlikely(opt->flags & IP6SKB_ROUTERALERT)) {
		if (ip6_call_ra_chain(skb, ntohs(opt->ra)))
			return 0;
	}

	/*
	 *	check and decrement ttl
	 */
	if (hdr->hop_limit <= 1) {
		/* Force OUTPUT device used as source address */
		skb->dev = dst->dev;
		icmpv6_send(skb, ICMPV6_TIME_EXCEED, ICMPV6_EXC_HOPLIMIT, 0);
		IP6_INC_STATS_BH(net, ip6_dst_idev(dst),
				 IPSTATS_MIB_INHDRERRORS);

		kfree_skb(skb);
		return -ETIMEDOUT;
	}

	/* XXX: idev->cnf.proxy_ndp? */
	if (net->ipv6.devconf_all->proxy_ndp &&
	    pneigh_lookup(&nd_tbl, net, &hdr->daddr, skb->dev, 0)) {
		int proxied = ip6_forward_proxy_check(skb);
		if (proxied > 0)
			return ip6_input(skb);
		else if (proxied < 0) {
			IP6_INC_STATS_BH(net, ip6_dst_idev(dst),
					 IPSTATS_MIB_INDISCARDS);
			goto drop;
		}
	}

	if (!xfrm6_route_forward(skb)) {
		IP6_INC_STATS_BH(net, ip6_dst_idev(dst),
				 IPSTATS_MIB_INDISCARDS);
		goto drop;
	}
	dst = skb_dst(skb);

	/* IPv6 specs say nothing about it, but it is clear that we cannot
	   send redirects to source routed frames.
	   We don't send redirects to frames decapsulated from IPsec.
	 */
	if (skb->dev == dst->dev && opt->srcrt == 0 && !skb_sec_path(skb)) {
		struct in6_addr *target = NULL;
		struct inet_peer *peer;
		struct rt6_info *rt;

		/*
		 *	incoming and outgoing devices are the same
		 *	send a redirect.
		 */

		rt = (struct rt6_info *) dst;
		if (rt->rt6i_flags & RTF_GATEWAY)
			target = &rt->rt6i_gateway;
		else
			target = &hdr->daddr;

		peer = inet_getpeer_v6(net->ipv6.peers, &rt->rt6i_dst.addr, 1);

		/* Limit redirects both by destination (here)
//.........这里部分代码省略.........
开发者ID:19Dan01,项目名称:linux,代码行数:101,代码来源:ip6_output.c


示例17: ipv6_frag_rcv

static int ipv6_frag_rcv(struct sk_buff *skb)
{
	struct frag_hdr *fhdr;
	struct frag_queue *fq;
	const struct ipv6hdr *hdr = ipv6_hdr(skb);
	struct net *net = dev_net(skb_dst(skb)->dev);
	int evicted;

	if (IP6CB(skb)->flags & IP6SKB_FRAGMENTED)
		goto fail_hdr;

	IP6_INC_STATS_BH(net, ip6_dst_idev(skb_dst(skb)), IPSTATS_MIB_REASMREQDS);

	/* Jumbo payload inhibits frag. header */
	if (hdr->payload_len==0)
		goto fail_hdr;

	if (!pskb_may_pull(skb, (skb_transport_offset(skb) +
				 sizeof(struct frag_hdr))))
		goto fail_hdr;

	hdr = ipv6_hdr(skb);
	fhdr = (struct frag_hdr *)skb_transport_header(skb);

	if (!(fhdr->frag_off & htons(0xFFF9))) {
		/* It is not a fragmented frame */
		skb->transport_header += sizeof(struct frag_hdr);
		IP6_INC_STATS_BH(net,
				 ip6_dst_idev(skb_dst(skb)), IPSTATS_MIB_REASMOKS);

		IP6CB(skb)->nhoff = (u8 *)fhdr - skb_network_header(skb);
		IP6CB(skb)->flags |= IP6SKB_FRAGMENTED;
		return 1;
	}

	evicted = inet_frag_evictor(&net->ipv6.frags, &ip6_frags, false);
	if (evicted)
		IP6_ADD_STATS_BH(net, ip6_dst_idev(skb_dst(skb)),
				 IPSTATS_MIB_REASMFAILS, evicted);

	fq = fq_find(net, fhdr->identification, &hdr->saddr, &hdr->daddr,
		     ip6_frag_ecn(hdr));
	if (fq != NULL) {
		int ret;

		spin_lock(&fq->q.lock);

		ret = ip6_frag_queue(fq, skb, fhdr, IP6CB(skb)->nhoff);

		spin_unlock(&fq->q.lock);
		inet_frag_put(&fq->q, &ip6_frags);
		return ret;
	}

	IP6_INC_STATS_BH(net, ip6_dst_idev(skb_dst(skb)), IPSTATS_MIB_REASMFAILS);
	kfree_skb(skb);
	return -1;

fail_hdr:
	IP6_INC_STATS(net, ip6_dst_idev(skb_dst(skb)), IPSTATS_MIB_INHDRERRORS);
	icmpv6_param_prob(skb, ICMPV6_HDR_FIELD, skb_network_header_len(skb));
	return -1;
}
开发者ID:7799,项目名称:linux,代码行数:63,代码来源:reassembly.c


示例18: ip6_frag_queue

该文章已有0人参与评论

请发表评论

全部评论

专题导读
上一篇:
C++ IP6_UPD_PO_STATS函数代码示例发布时间:2022-05-30
下一篇:
C++ IP6_INC_STATS函数代码示例发布时间:2022-05-30
热门推荐
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服(服务时间 9:00~18:00)

在线QQ客服
地址:深圳市南山区西丽大学城创智工业园
电邮:jeky_zhao#qq.com
移动电话:139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap