C++ INS_Next函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中INS_Next函数的典型用法代码示例。如果您正苦于以下问题：C++ INS_Next函数的具体用法？C++ INS_Next怎么用？C++ INS_Next使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了INS_Next函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: Trace

VOID Trace (TRACE trace, VOID *v)
{
    for (BBL bbl = TRACE_BblHead(trace); BBL_Valid(bbl); bbl = BBL_Next(bbl))
    {
        for (INS ins = BBL_InsHead(bbl); INS_Valid(ins); ins = INS_Next(ins))
        {
            xed_iclass_enum_t iclass1 = static_cast<xed_iclass_enum_t>(INS_Opcode(ins));
            if (iclass1 == XED_ICLASS_FLD1 && INS_Valid(INS_Next(ins)))
            {
                xed_iclass_enum_t iclass2 = static_cast<xed_iclass_enum_t>(INS_Opcode(INS_Next(ins)));
                if (iclass2 == XED_ICLASS_FLD1 && INS_Valid(INS_Next(INS_Next(ins))))
                {
                    xed_iclass_enum_t iclass3 = static_cast<xed_iclass_enum_t>(INS_Opcode(INS_Next(INS_Next(ins))));
                    if (iclass3 == XED_ICLASS_FLD1)
                    {
                        printf ("found fld1 sequence at %x\n", INS_Address(INS_Next(INS_Next(ins))));
                        
                        {
                            INS_InsertCall(INS_Next(INS_Next(ins)), IPOINT_AFTER, AFUNPTR(CallToFldzToTop3), IARG_END);
                            printf ("Inserted call1 to FldzToTop3 after instruction at %x\n", INS_Address(INS_Next(INS_Next(ins))));
                            
                        }
                    }
                }
            }
        }
    }
}

开发者ID:alagenchev，项目名称:school_code，代码行数:28，代码来源:x87_regs_in_context.cpp

示例2: Trace

VOID Trace (TRACE trace, VOID *v)
{
    for (BBL bbl = TRACE_BblHead(trace); BBL_Valid(bbl); bbl = BBL_Next(bbl))
    {
        for (INS ins = BBL_InsHead(bbl); INS_Valid(ins); ins = INS_Next(ins))
        {
            xed_iclass_enum_t iclass1 = static_cast<xed_iclass_enum_t>(INS_Opcode(ins));
            if (iclass1 == XED_ICLASS_FLD1 && INS_Valid(INS_Next(ins)))
            {
                xed_iclass_enum_t iclass2 = static_cast<xed_iclass_enum_t>(INS_Opcode(INS_Next(ins)));
                if (iclass2 == XED_ICLASS_FLD1 && INS_Valid(INS_Next(INS_Next(ins))))
                {
                    xed_iclass_enum_t iclass3 = static_cast<xed_iclass_enum_t>(INS_Opcode(INS_Next(INS_Next(ins))));
                    if (iclass3 == XED_ICLASS_FLD1)
                    {
                        printf ("found fld1 sequence at %lx\n", (unsigned long)(INS_Address(INS_Next(INS_Next(ins)))));
                        if (testNum == 0)
                        {
                            INS_InsertCall(INS_Next(INS_Next(ins)), IPOINT_AFTER, AFUNPTR(CallToUnMaskZeroDivideInMxcsr), IARG_END);
                            printf ("Inserted call1 to UnMaskZeroDivideInMxcsr after instruction at %lx\n",
                                    (unsigned long)(INS_Address(INS_Next(INS_Next(ins)))));
                            testNum++;
                        }
                        return;
                    }
                }
            }
        }
    }
}

开发者ID:herjmoo，项目名称:research，代码行数:30，代码来源:test_iarg_preserve_mxcsr.cpp

示例3: Image

VOID Image(IMG img, VOID * v)
{
    if (strstr (IMG_Name(img).c_str(), "flags_at_analysis_app")==NULL)
    {
        return;
    }
    for (SEC sec = IMG_SecHead(img); SEC_Valid(sec); sec = SEC_Next(sec))
    {
        for (RTN rtn = SEC_RtnHead(sec); RTN_Valid(rtn); rtn = RTN_Next(rtn))
        {
            // Prepare for processing of RTN, an  RTN is not broken up into BBLs,
            // it is merely a sequence of INSs 
            RTN_Open(rtn);
            
            
            for (INS ins = RTN_InsHead(rtn); INS_Valid(ins); ins = INS_Next(ins))
            {
                if (INS_Opcode(ins)==XED_ICLASS_POPF
                    || INS_Opcode(ins)==XED_ICLASS_POPFD
                    || INS_Opcode(ins)==XED_ICLASS_POPFQ)
                { // popf is the marker
                    printf ("found popf in rtn %s\n", RTN_Name(rtn).c_str());
                    if (!INS_Valid(INS_Next(ins)) || !INS_Valid(INS_Next(INS_Next(ins))))
                    {
                        printf ("wrong popf marker found\n");
                        exit (-1);
                    }

                    printf ("next ins should be cmp al, 0x81   it is   %s\n", INS_Disassemble(INS_Next(ins)).c_str());
                    printf ("next ins should be xor ecx, ecx   it is   %s\n", INS_Disassemble(INS_Next(INS_Next(ins))).c_str());
                    
                    // Insert analysis calls to read the value of the flags register just after the cmp al, 0x81 - the OF flag should be set
                    INS_InsertIfCall(INS_Next(INS_Next(ins)), IPOINT_BEFORE, (AFUNPTR)IfReturnTrue, 
                         IARG_INST_PTR,
                         IARG_END);
                    INS_InsertThenCall(INS_Next(INS_Next(ins)), IPOINT_BEFORE, (AFUNPTR)ThenFunc,
                                       IARG_REG_VALUE, REG_GFLAGS,
                                       IARG_END);
                    INS_InsertCall(INS_Next(INS_Next(ins)), IPOINT_BEFORE, (AFUNPTR)AnalysisFunc,
                                   IARG_REG_VALUE, REG_GFLAGS,
                                   IARG_END);
                }
            }

            // to preserve space, release data associated with RTN after we have processed it
            RTN_Close(rtn);
        }
    }
}

开发者ID:alagenchev，项目名称:school_code，代码行数:49，代码来源:flags_at_analysis_tool.cpp

示例4: RecordRegisters

INT32 RecordRegisters(BBL bbl, 
                      UINT16 * stats, 
                      UINT32 max_stats)
{
    UINT32 count = 0;
    
    for (INS ins = BBL_InsHead(bbl); INS_Valid(ins); ins = INS_Next(ins))
    {
        if (count >= max_stats)
        {
            cerr << "Too many stats in this block" << endl;
            exit(1);
        }
        bool rmem = INS_IsMemoryRead(ins) || INS_HasMemoryRead2(ins);
        bool wmem = INS_IsMemoryWrite(ins);
        bool rw_mem = rmem & wmem;
        if (rw_mem)
            stats[count++] = PATTERN_MEM_RW;
        else if (rmem)
            stats[count++] = PATTERN_MEM_R;
        else if (wmem)
            stats[count++] = PATTERN_MEM_W;
        else if (INS_SegmentRegPrefix(ins) != REG_INVALID())
            stats[count++] = PATTERN_NO_MEM_LIES;
        else 
            stats[count++] = PATTERN_NO_MEM;
    }

    stats[count++] = 0;
    
    return count;
}

开发者ID:gungun1010，项目名称:hidden，代码行数:32，代码来源:ldstmix.cpp

示例5: ImageLoad

/*
 * Instrumentation-time routine looking for the routine we'd like to instrument.
 */
static VOID ImageLoad(IMG img, VOID * v)
{
    if (IMG_IsMainExecutable(img))
    {
        *outFile << "In main application image" << endl;
        // Search for the assembly routine in the application
        RTN AsmRtn = RTN_FindByName(img, "operImmCmds");
        if (!RTN_Valid(AsmRtn))
        {
            AsmRtn = RTN_FindByName(img, "_operImmCmds");
        }
        if (RTN_Valid(AsmRtn))
        {
            *outFile << "Function operImmCmds found" << endl;
            RTN_Open(AsmRtn);
            // Go over each of the routine's instructions
            for (INS ins = RTN_InsHead(AsmRtn); INS_Valid(ins); ins = INS_Next(ins))
            {
                Instruction(ins, 0);
            }
            RTN_Close(AsmRtn);
            *outFile << "Done with function operImmCmds" << endl;
        }
        else
        {
            *outFile << "Function operImmCmds not found!" << endl;
        }
    }
}

开发者ID:alugupta，项目名称:resilient-systems，代码行数:32，代码来源:oper-imm.cpp

示例6: Trace

// Pin calls this function every time a new basic block is encountered
// It inserts a call to docount
VOID Trace(TRACE trace, VOID *v)
{
    // Visit every basic block in the trace
    for (BBL bbl = TRACE_BblHead(trace); BBL_Valid(bbl); bbl = BBL_Next(bbl))
    {
        for (INS ins = BBL_InsHead(bbl); INS_Valid(ins); ins = INS_Next(ins))
        {
            if (INS_IsMemoryRead(ins))
            {
                INS_InsertIfCall(ins, IPOINT_BEFORE, (AFUNPTR)ReadAlways, IARG_MEMORYREAD_EA, IARG_END);
                INS_InsertThenCall(ins, IPOINT_BEFORE, (AFUNPTR)ReadRare, IARG_MEMORYREAD_EA, IARG_END);
            }
        }
            
        // Always()->Rare() are partially inlined
        BBL_InsertIfCall(bbl,   IPOINT_BEFORE, (AFUNPTR)Always, IARG_END);
        BBL_InsertThenCall(bbl, IPOINT_BEFORE, (AFUNPTR)Rare, IARG_END);

        // Always()->Rare() are partially inlined
        BBL_InsertIfCall(bbl,   IPOINT_BEFORE, (AFUNPTR)AlwaysNoinline, IARG_END);
        BBL_InsertThenCall(bbl, IPOINT_BEFORE, (AFUNPTR)RareNoinline, IARG_END);

        // Noinline() is not inlined
        BBL_InsertCall(bbl, IPOINT_BEFORE, (AFUNPTR)Noinline, IARG_END);
    }
}

开发者ID:EmilyBragg，项目名称:profiling-tool，代码行数:28，代码来源:partialinline.cpp

示例7: modifyAddressing

// Offset the addressing of the first "or" instruction back by 4 bytes.
static VOID modifyAddressing (RTN rtn)
{
    for (INS ins = RTN_InsHead(rtn); INS_Valid(ins); ins = INS_Next(ins))
    {
        if (INS_Opcode(ins) == XED_ICLASS_OR)
        {
            printf ("Rewriting address of ins\n%x: %s\n", INS_Address(ins), INS_Disassemble(ins).c_str());

            // pass the original memory address accessed by the app instruction (i.e. before the rewrite) to AddrValueA
            INS_InsertCall(ins, IPOINT_BEFORE,
                           AFUNPTR(AddrValueA),
                           IARG_MEMORYOP_EA, 0, IARG_END);

            INS_InsertCall(ins, IPOINT_BEFORE,
                           AFUNPTR(returnValueMinus4),
                           IARG_MEMORYOP_EA, 0,
                           IARG_RETURN_REGS, scratchReg, IARG_END);

            INS_RewriteMemoryOperand(ins, 0, scratchReg);

            // pass the original memory address accessed by the app instruction (i.e. before the rewrite) to AddrValueB
            INS_InsertCall(ins, IPOINT_BEFORE,
                           AFUNPTR(AddrValueB),
                           IARG_MEMORYOP_EA, 0, IARG_END);

            instrumentationCount++;
            return;
        }
    }
}

开发者ID:EmilyBragg，项目名称:profiling-tool，代码行数:31，代码来源:aoti_mutation_tool.cpp

示例8: Image

VOID Image(IMG img, VOID * v)
{
    for (SEC sec = IMG_SecHead(img); SEC_Valid(sec); sec = SEC_Next(sec))
    {
        for (RTN rtn = SEC_RtnHead(sec); RTN_Valid(rtn); rtn = RTN_Next(rtn))
        {
            RTN_Open(rtn);
            
            for (INS ins = RTN_InsHead(rtn); INS_Valid(ins); ins = INS_Next(ins))
            {
                if( INS_IsPredicated(ins) )
                    GlobalStatsStatic.predicated[ INS_Category(ins) ]++;
                else
                    GlobalStatsStatic.unpredicated[ INS_Category(ins) ]++;
            }

            RTN_Close(rtn);
        }
    }

    if( KnobProfileStaticOnly.Value() )
    {
        Fini(0,0);
        exit(0);
    }
}

开发者ID:gungun1010，项目名称:hidden，代码行数:26，代码来源:catmix.cpp

示例9: Trace

VOID Trace(TRACE trace, VOID *v)
{
    BOOL rewrite = false;
    
    for (BBL bbl = TRACE_BblHead(trace); BBL_Valid(bbl); bbl = BBL_Next(bbl))
    {
        for (INS ins = BBL_InsHead(bbl); INS_Valid(ins); ins = INS_Next(ins))
        {
            // If we see an instruction that needs rewriting, then rewrite all
            if (SwizzleRefs.find(INS_Address(ins)) != SwizzleRefs.end())
                rewrite = true;
        
            if (rewrite)
            {
                // If we suspect this instruction needs to be swizzled, generate safe, but slow code
                RewriteIns(ins);
            }
            else
            {
                // Generate code to check if swizzling is needed, but not do it
                CheckIns(ins, TRACE_Address(trace));
            }
        }
    }
}

开发者ID:telnetgmike，项目名称:arm-v7a-pintool，代码行数:25，代码来源:swizzle3.C

示例10: Routine

// Pin calls this function every time a new rtn is executed
VOID Routine(RTN rtn, VOID *v)
{
    
    // Allocate a counter for this routine
    RTN_COUNT * rc = new RTN_COUNT;

    // The RTN goes away when the image is unloaded, so save it now
    // because we need it in the fini
    rc->_name = RTN_Name(rtn);
    rc->_image = StripPath(IMG_Name(SEC_Img(RTN_Sec(rtn))).c_str());
    rc->_address = RTN_Address(rtn);
    rc->_icount = 0;
    rc->_rtnCount = 0;

    // Add to list of routines
    rc->_next = RtnList;
    RtnList = rc;
            
    RTN_Open(rtn);
            
    // Insert a call at the entry point of a routine to increment the call count
    RTN_InsertCall(rtn, IPOINT_BEFORE, (AFUNPTR)docount, IARG_PTR, &(rc->_rtnCount), IARG_END);
    
    // For each instruction of the routine
    for (INS ins = RTN_InsHead(rtn); INS_Valid(ins); ins = INS_Next(ins))
    {
        // Insert a call to docount to increment the instruction counter for this rtn
        INS_InsertCall(ins, IPOINT_BEFORE, (AFUNPTR)docount, IARG_PTR, &(rc->_icount), IARG_END);
    }

    
    RTN_Close(rtn);
}

开发者ID:dcashman，项目名称:Coursework，代码行数:34，代码来源:proccount.cpp

示例11: TRACE_Address

VOID PolymorphicCodeHandlerModule::inspectTrace(TRACE trace){
	// set the range of address in which the current trace resides
	this->trace_head = TRACE_Address(trace);
	this->trace_tail = trace_head + TRACE_Size(trace);
	for (BBL bbl = TRACE_BblHead(trace); BBL_Valid(bbl); bbl = BBL_Next(bbl))
    {
        for (INS ins = BBL_InsHead(bbl); INS_Valid(ins); ins = INS_Next(ins))
        {	
			// for ech instruction we have to check if it has been overwritten by a previous instruction of the current trace (polimiorfic code detection)
			INS_InsertCall(ins, IPOINT_BEFORE, AFUNPTR(checkIfWrittenAddress), 
				IARG_INST_PTR, 
				IARG_CONTEXT, 
				IARG_UINT32, INS_Size(ins), 
				IARG_PTR, this,
				IARG_END);				
			for (UINT32 op = 0; op<INS_MemoryOperandCount(ins); op++) {
				if(INS_MemoryOperandIsWritten(ins,op)){	
					// for each write operation we have to check if the traget address is inside the current trace (attempt to write polimorfic code)
					INS_InsertCall(ins, IPOINT_BEFORE, AFUNPTR(polimorficCodeHandler),
						IARG_INST_PTR,
						IARG_MEMORYOP_EA, op,
						IARG_PTR, this,
						IARG_END);		
				}	
			}					
        }
    }
}

开发者ID:chubbymaggie，项目名称:PINdemonium，代码行数:28，代码来源:PolymorphicCodeHandlerModule.cpp

示例12: Trace

// Pin calls this function every time a new instruction is encountered
void Trace(TRACE trace , void *v)
{
	for(BBL bbl= TRACE_BblHead(trace); BBL_Valid(bbl); bbl = BBL_Next(bbl)){
		for( INS ins = BBL_InsHead(bbl); INS_Valid(ins) ; ins =INS_Next(ins)){
			oepf.IsCurrentInOEP(ins);
		}
	}
}

开发者ID:fonstest，项目名称:PINTOOLS，代码行数:9，代码来源:MyPinTool.cpp

示例13: Instruction

VOID Instruction(INS ins, VOID *v)
{
    if (INS_IsBranchOrCall(ins) || !INS_Valid(INS_Next(ins)))
    {
        INS_InsertCall(
            ins, IPOINT_BEFORE, (AFUNPTR)BblRef,
            IARG_END);
    }
}

开发者ID:alugupta，项目名称:resilient-systems，代码行数:9，代码来源:bblnull.cpp

示例14: instrument_trace

 static void instrument_trace(TRACE trace, VOID *v)
 {
     sse_aligner_t* pthis = static_cast<sse_aligner_t*>(v);
     bool is_read = false;
     for (BBL bbl = TRACE_BblHead(trace); BBL_Valid(bbl); bbl = BBL_Next(bbl))
         for (INS ins = BBL_InsHead(bbl); INS_Valid(ins); ins = INS_Next(ins))
             if (check_for_sse_memop(ins, is_read, pthis))
                 rewrite_instruction(ins, is_read, pthis);
 }

开发者ID:alugupta，项目名称:resilient-systems，代码行数:9，代码来源:sse-unaligned-class.cpp

示例15: BBLContainMemOp

bool BBLContainMemOp(BBL bbl) {
  for (INS ins = BBL_InsHead(bbl); INS_Valid(ins); ins = INS_Next(ins)) {
    if (INS_IsStackRead(ins) || INS_IsStackWrite(ins))
      continue;
    if (INS_IsMemoryRead(ins) || INS_IsMemoryWrite(ins))
      return true;
  }
  return false;
}

开发者ID:poeliu，项目名称:Pinso，代码行数:9，代码来源:pin_util.cpp

示例16: TraceInserted

VOID TraceInserted(TRACE trace, VOID *)
{
    for (BBL bbl = TRACE_BblHead(trace); BBL_Valid(bbl); bbl = BBL_Next(bbl))
    {
        for (INS ins = BBL_InsHead(bbl); INS_Valid(ins); ins = INS_Next(ins))
        {
            cacheInstructions++;
        }
    }
}

开发者ID:aarony，项目名称:arm-v7a-pintool，代码行数:10，代码来源:ccfp.C

示例17: Trace

VOID Trace(TRACE trace, VOID *v)
{
    for (BBL bbl = TRACE_BblHead(trace); BBL_Valid(bbl); bbl = BBL_Next(bbl))
    {
        for (INS ins = BBL_InsHead(bbl); INS_Valid(ins); ins = INS_Next(ins))
        {
            RewriteIns(ins);
        }
    }
}

开发者ID:gungun1010，项目名称:hidden，代码行数:10，代码来源:rewritememop.cpp

示例18: RecordRegisters

INT32 RecordRegisters(BBL bbl, UINT16 * stats)
{
    INT32 count = 0;
    
    for (INS ins = BBL_InsHead(bbl); INS_Valid(ins); ins = INS_Next(ins))
    {
        const UINT32 max_r = INS_MaxNumRRegs(ins);
    
        for( UINT32 i=0; i < max_r; i++ )
        {
            const REG reg =  INS_RegR(ins, i );
            if( REG_is_gr(reg) )
            {
                stats[count++] = REG_GetStatsIndex(reg,FALSE);
            }
#if 0
            // This is for arm
            else if( REG_is_aggregate(reg) )
            {
                REGSET regset = INS_RegAggregateR(ins);
                for( REG reg =  REGSET_PopNext(regset); REG_valid(reg); reg  =  REGSET_PopNext(regset) )
                {
                    stats[count++] = REG_GetStatsIndex(reg,FALSE);
                }
            }
#endif
        }

        const UINT32 max_w = INS_MaxNumWRegs(ins);            
        
        for( UINT32 i=0; i < max_w; i++ )
        {
            const REG reg =  INS_RegW(ins, i );
            if( REG_is_gr(reg) )
            {
                stats[count++] = REG_GetStatsIndex(reg,TRUE);
            }
#if 0
            else if( REG_is_aggregate(reg) )
            {
                REGSET regset = INS_RegAggregateW(ins);
                for( REG reg =  REGSET_PopNext(regset); REG_valid(reg); reg  =  REGSET_PopNext(regset) )
                {
                    stats[count++] = REG_GetStatsIndex(reg,TRUE);
                }
            }
#endif
        }
    }

    stats[count++] = 0;
    
    return count;
}

开发者ID:alagenchev，项目名称:school_code，代码行数:54，代码来源:regmix.cpp

示例19: InstrumentRoutine

// Insert a call to an analysis routine that sets the scratch xmm registers, the call is inserted just after the
// movdqa instruction of DoXmm (see xmm-asm-*.s)
static VOID InstrumentRoutine(RTN rtn, VOID *)
{
    if (RTN_Name(rtn) == "DoXmm")
    {
        RTN_Open(rtn);
        for (INS ins = RTN_InsHead(rtn); INS_Valid(ins); ins = INS_Next(ins))
        {
            if (INS_Opcode(ins)==XED_ICLASS_MOVDQA)
            {
                fprintf (fp, "instrumenting ins %p %s\n", (void *)INS_Address(ins), INS_Disassemble(ins).c_str());
                instrumentedMovdqa = TRUE;
                INS_InsertCall(ins, IPOINT_AFTER, (AFUNPTR)SetXmmScratchesFun, IARG_PTR, xmmInitVals, IARG_END);
                ipAfterMovdqa = INS_Address(INS_Next(ins));
                fprintf (fp, "ipAfterMovdqa ins %p  %s\n", (void *)ipAfterMovdqa, INS_Disassemble(INS_Next(ins)).c_str());
                fflush (fp);
            }
        }
        RTN_Close(rtn);
    }
}

开发者ID:asudhak，项目名称:peachfuzz-code，代码行数:22，代码来源:set_xmm_scratches_before_breakpoint.cpp

示例20: Rtn

VOID Rtn(RTN rtn, VOID * v)
{
    string name = RTN_Name(rtn);
    if (name == "test1") {
        RTN_Open(rtn);
        for (INS ins = RTN_InsHead(rtn); INS_Valid(ins); ins = INS_Next(ins)) {
            CountsUpdate(ins);
        }
        RTN_Close(rtn);
    }
}

开发者ID:alagenchev，项目名称:school_code，代码行数:11，代码来源:insMix.cpp

注：本文中的INS_Next函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ INS_Valid函数代码示例发布时间：2022-05-30

C++ INS_InsertCall函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19221|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9996|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8331|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8700|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8644|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9666|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8630|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：8004|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8664|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7539|2022-11-06

客服电话

电子邮件

C++ INS_Next函数代码示例

示例1: Trace

示例2: Trace

示例3: Image

示例4: RecordRegisters

示例5: ImageLoad

示例6: Trace

示例7: modifyAddressing

示例8: Image

示例9: Trace

示例10: Routine

示例11: TRACE_Address

示例12: Trace

示例13: Instruction

示例14: instrument_trace

示例15: BBLContainMemOp

示例16: TraceInserted

示例17: Trace

示例18: RecordRegisters

示例19: InstrumentRoutine

示例20: Rtn

请发表评论

全部评论

上一篇：

下一篇：

Delphi7客户端调用WebService（天气预报）

bradtraversy/iweather: Ionic 3 mobile we

joaomh/curso-de-matlab

断牙刷新位置时间（断牙属性及刷新位置介绍

rugk/mastodon-simplified-federation: Sim

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053