C++ INS_InsertCall函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中INS_InsertCall函数的典型用法代码示例。如果您正苦于以下问题：C++ INS_InsertCall函数的具体用法？C++ INS_InsertCall怎么用？C++ INS_InsertCall使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了INS_InsertCall函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: MemoryTrace

static VOID MemoryTrace(TRACE trace, INS ins)
{
	if (!KnobTraceMemory)
		return;

	if (INS_IsMemoryRead(ins) ||
	    INS_HasMemoryRead2(ins) ||
	    INS_IsMemoryWrite(ins)
	   ) {
		INS_InsertCall(ins, IPOINT_BEFORE,
				AFUNPTR(EmitMemory),
				IARG_THREAD_ID,
				IARG_INST_PTR,
				IARG_BOOL, INS_IsMemoryWrite(ins),
				(INS_IsMemoryWrite(ins) ?
				 	IARG_MEMORYWRITE_EA :
				 INS_IsMemoryRead(ins) ?
				 	IARG_MEMORYREAD_EA : IARG_MEMORYREAD2_EA),
				IARG_END
			      );
	}
}

开发者ID:CYBoys，项目名称:RunTracer，代码行数:22，代码来源:runtrace.cpp

示例2: Trace

static VOID Trace(TRACE trace, VOID *v)
{
    RTN rtn = TRACE_Rtn(trace);
    
    if (!RTN_Valid(rtn) || RTN_Name(rtn) != watch_rtn)
    {
        return;
    }

    if (TRACE_Address(trace) == RTN_Address(rtn)) 
    {
        INS ins = BBL_InsHead(TRACE_BblHead(trace));
        INS_InsertCall(ins, IPOINT_BEFORE, AFUNPTR(Emit),
                             IARG_PTR, "Trace instrumentation3", IARG_END);
        BBL_InsertCall(TRACE_BblHead(trace), IPOINT_BEFORE, AFUNPTR(Emit),
                             IARG_PTR, "Trace instrumentation2", IARG_END);
        TRACE_InsertCall(trace, IPOINT_BEFORE, AFUNPTR(Emit),
                             IARG_PTR, "Trace instrumentation1", IARG_END);
        
        printf("Trace Instrumenting %s\n", watch_rtn);
    }
}

开发者ID:FengXingYuXin，项目名称:SHMA，代码行数:22，代码来源:instrumentation_order13.cpp

示例3: Ins

VOID Ins( INS ins, VOID *v )
{
    if (KnobDetach > 0 && scount > KnobDetach)
        return;

    if (KnobLog)
    {
        void *addr = Addrint2VoidStar(INS_Address(ins));
        string disasm = INS_Disassemble(ins);
        PrintIns(addr, disasm.c_str());
    }

    scount++;

    // call and return need also stack manipulation (see emu_stack.cpp)
    // conditional jumps need handling the condition (not supported yet)
    if (INS_IsCall(ins) || INS_IsRet(ins) || INS_Category(ins) == XED_CATEGORY_COND_BR)
        return;

    if (INS_IsIndirectBranchOrCall(ins))
    {
        INS_InsertCall(ins, IPOINT_BEFORE,
            AFUNPTR(EmuIndJmp),
            IARG_BRANCH_TARGET_ADDR,
            IARG_RETURN_REGS, scratchReg, IARG_END);

        INS_InsertIndirectJump(ins, IPOINT_AFTER, scratchReg);

        INS_Delete(ins);
    }
    else if (INS_IsDirectBranchOrCall(ins))
    {
        ADDRINT tgt = INS_DirectBranchOrCallTargetAddress(ins);

        INS_InsertDirectJump(ins, IPOINT_AFTER, tgt);

        INS_Delete(ins);
    }
}

开发者ID:alugupta，项目名称:resilient-systems，代码行数:39，代码来源:emu_jumps.cpp

示例4: Instruction

VOID Instruction(INS ins, VOID *v)
{
    INS_InsertCall(ins, IPOINT_BEFORE, AFUNPTR(incinst), IARG_END);
    INS_InsertCall(ins, IPOINT_BEFORE, AFUNPTR(andinst), IARG_END);

    static bool first = true;
    if (first)
    {
        data[16] = 1;
        INS_InsertCall(ins, IPOINT_BEFORE, AFUNPTR(cmov_test), IARG_PTR, &cmov_data, IARG_END);
        INS_InsertCall(ins, IPOINT_BEFORE, AFUNPTR(leainst), IARG_PTR, data, IARG_END);
        INS_InsertCall(ins, IPOINT_BEFORE, AFUNPTR(CheckData), IARG_END);

        INS_InsertCall(ins, IPOINT_BEFORE, AFUNPTR(leaindex), IARG_REG_VALUE, REG_STACK_PTR, IARG_PTR, &res, IARG_END);
#if defined(TARGET_IA32E)
        INS_InsertCall(ins, IPOINT_BEFORE, AFUNPTR(leaindex), IARG_REG_VALUE, REG_R9, IARG_PTR, &res, IARG_END);
#endif
    }

    first = false;
}

开发者ID:asudhak，项目名称:peachfuzz-code，代码行数:21，代码来源:insertand.cpp

示例5: EmulateLoad

VOID EmulateLoad(INS ins, VOID* v)
{
    // Find the instructions that move a value from memory to a register
    if (INS_Opcode(ins) == XED_ICLASS_MOV &&
        INS_IsMemoryRead(ins) && 
        INS_OperandIsReg(ins, 0) &&
        INS_OperandIsMemory(ins, 1))
    {
        // op0 <- *op1
        INS_InsertCall(ins,
                       IPOINT_BEFORE,
                       AFUNPTR(DoLoad),
                       IARG_UINT32,
                       REG(INS_OperandReg(ins, 0)),
                       IARG_MEMORYREAD_EA,
                       IARG_RETURN_REGS,
                       INS_OperandReg(ins, 0),
                       IARG_END);

        // Delete the instruction
        INS_Delete(ins);
    }
}

开发者ID:kengiter，项目名称:RuntimeASLR，代码行数:23，代码来源:safecopy.cpp

示例6: Instruction

// Pin calls this function every time a new instruction is encountered
VOID Instruction(INS ins, VOID *v)
{
    if (INS_IsVgather(ins))
    {
        REG ymmDest = INS_OperandReg(ins, 0), ymmMask = INS_OperandReg(ins, 2);
        if (!REG_is_ymm(ymmDest))
        {
            ymmDest = (REG)(ymmDest - REG_XMM0 + REG_YMM0);
        }
        if (!REG_is_ymm(ymmMask))
        {
            ymmMask = (REG)(ymmMask - REG_XMM0 + REG_YMM0);
        }
                
        INS_InsertCall(ins, IPOINT_BEFORE, (AFUNPTR)EmuGather, 
                        IARG_MULTI_MEMORYACCESS_EA,
                        IARG_REG_REFERENCE, ymmDest,
                        IARG_REG_REFERENCE, ymmMask,
                        IARG_END);

        INS_Delete(ins);
    }
}

开发者ID:cherry-wb，项目名称:pintools，代码行数:24，代码来源:gather_emu.cpp

示例7: Trace

VOID Trace(TRACE trace, VOID *v)
{
    const RTN rtn = TRACE_Rtn(trace);
    
    if (! RTN_Valid(rtn))
        return;
    
    const SEC sec = RTN_Sec(rtn);
    ASSERTX(SEC_Valid(sec));
    
    const IMG img = SEC_Img(sec);
    ASSERTX(IMG_Valid(img));
    
    if ( KnobNoSharedLibs.Value() && IMG_Type(img) == IMG_TYPE_SHAREDLIB)
        return;
    
    for (BBL bbl = TRACE_BblHead(trace); BBL_Valid(bbl); bbl = BBL_Next(bbl))
    {
        // Record the registers into a dummy buffer so we can count them
        UINT16 buffer[128 * 1024];
        INT32 count = RecordRegisters(bbl, buffer);
        ASSERTX(count < 128 * 1024);
        
        // Summarize the stats for the bbl in a 0 terminated list
        // This is done at instrumentation time
        UINT16 * stats = new UINT16[count];

        RecordRegisters(bbl, stats);

        // Insert instrumentation to count the number of times the bbl is executed
        BBLSTATS * bblstats = new BBLSTATS(stats);
        INS_InsertCall(BBL_InsHead(bbl), IPOINT_BEFORE, AFUNPTR(docount), IARG_PTR, &(bblstats->_counter), IARG_END);

        // Remember the counter and stats so we can compute a summary at the end
        statsList.push_back(bblstats);
    }
}

开发者ID:alagenchev，项目名称:school_code，代码行数:37，代码来源:regmix.cpp

示例8: Instruction

LOCALFUN VOID Instruction(INS ins, VOID *v)
{
    // all instruction fetches access I-cache
    INS_InsertCall(
        ins, IPOINT_BEFORE, (AFUNPTR)InsRef,
        IARG_INST_PTR,
        IARG_END);

    if (INS_IsMemoryRead(ins))
    {
        const UINT32 size = INS_MemoryReadSize(ins);
        const AFUNPTR countFun = (size <= 4 ? (AFUNPTR) MemRefSingle : (AFUNPTR) MemRefMulti);

        // only predicated-on memory instructions access D-cache
        INS_InsertPredicatedCall(
            ins, IPOINT_BEFORE, countFun,
            IARG_MEMORYREAD_EA,
            IARG_MEMORYREAD_SIZE,
            IARG_UINT32, CACHE_BASE::ACCESS_TYPE_LOAD,
            IARG_END);
    }

    if (INS_IsMemoryWrite(ins))
    {
        const UINT32 size = INS_MemoryWriteSize(ins);
        const AFUNPTR countFun = (size <= 4 ? (AFUNPTR) MemRefSingle : (AFUNPTR) MemRefMulti);

        // only predicated-on memory instructions access D-cache
        INS_InsertPredicatedCall(
            ins, IPOINT_BEFORE, countFun,
            IARG_MEMORYWRITE_EA,
            IARG_MEMORYWRITE_SIZE,
            IARG_UINT32, CACHE_BASE::ACCESS_TYPE_STORE,
            IARG_END);
    }
}

开发者ID:EmilyBragg，项目名称:profiling-tool，代码行数:36，代码来源:allcache.cpp

示例9: insertRepMemoryCountInstrumentation

// Insert instrumentation to count memory operations
// The optimisations here are similar to those above.
static VOID insertRepMemoryCountInstrumentation(INS ins, UINT32 opIdx)
{
    const opInfo * op = &opcodes[opIdx];

    if (takesConditionalRep(opIdx))
    {
        INS_InsertCall(ins, IPOINT_BEFORE, (AFUNPTR)addMemops,
                       IARG_UINT32, opIdx,
                       IARG_EXECUTING,
                       IARG_UINT32, op->reads,
                       IARG_UINT32, op->writes,
                       IARG_END);
    }
    else
    {
        INS_InsertIfCall(ins, IPOINT_BEFORE, (AFUNPTR)returnArg, IARG_FIRST_REP_ITERATION, IARG_END);
        INS_InsertThenCall(ins, IPOINT_BEFORE, (AFUNPTR)addMemops,
                           IARG_UINT32, opIdx,
                           IARG_REG_VALUE, INS_RepCountRegister(ins),
                           IARG_UINT32, op->reads,
                           IARG_UINT32, op->writes,
                           IARG_END);
    }
}

开发者ID:andrewjinyounglee，项目名称:PerVERT，代码行数:26，代码来源:checkreps.cpp

示例10: Instruction

VOID Instruction(INS ins, void *v)
{

// The subcases of direct branch and indirect branch are
// broken into "call" or "not call".  Call is for a subroutine
// These are left as subcases in case the programmer wants
// to extend the statistics to see how sub cases of branches behave

    if( INS_IsRet(ins) )
    {
        INS_InsertCall(ins, IPOINT_BEFORE, (AFUNPTR) br_predict, 
            IARG_INST_PTR, IARG_BRANCH_TAKEN,  IARG_END);
    }
    else if( INS_IsSyscall(ins) )
    {
        INS_InsertCall(ins, IPOINT_BEFORE, (AFUNPTR) br_predict, 
            IARG_INST_PTR, IARG_BRANCH_TAKEN,  IARG_END);
    }
    else if (INS_IsDirectBranchOrCall(ins))
    {
        if( INS_IsCall(ins) ) {
            INS_InsertCall(ins, IPOINT_BEFORE, (AFUNPTR) br_predict, 
                IARG_INST_PTR, IARG_BRANCH_TAKEN,  IARG_END);
        }
        else {
            INS_InsertCall(ins, IPOINT_BEFORE, (AFUNPTR) br_predict, 
                IARG_INST_PTR, IARG_BRANCH_TAKEN,  IARG_END);
        }
    }
    else if( INS_IsIndirectBranchOrCall(ins) )
    {
        if( INS_IsCall(ins) ) {
            INS_InsertCall(ins, IPOINT_BEFORE, (AFUNPTR) br_predict, 
                IARG_INST_PTR, IARG_BRANCH_TAKEN,  IARG_END);
    }
        else {
            INS_InsertCall(ins, IPOINT_BEFORE, (AFUNPTR) br_predict, 
                IARG_INST_PTR, IARG_BRANCH_TAKEN,  IARG_END);
        }
    }

}

开发者ID:rtvj，项目名称:Advanced_Comp_Arch，代码行数:42，代码来源:checkpoint1A.cpp

示例11: Instruction

VOID Instruction(INS ins, VOID *v)
{
    if (KnobCompareContexts)
    {
        INS_InsertCall(ins, IPOINT_BEFORE, (AFUNPTR) ReceiveContext,  IARG_CONTEXT, IARG_END);
        INS_InsertCall(ins, IPOINT_BEFORE, (AFUNPTR) VerifyContext,   IARG_CONST_CONTEXT, IARG_END);
        if (KnobCompareReverseContexts)
        {
            INS_InsertCall(ins, IPOINT_BEFORE, (AFUNPTR) ReceiveContext,  IARG_CONST_CONTEXT, IARG_END);
            INS_InsertCall(ins, IPOINT_BEFORE, (AFUNPTR) VerifyContext,   IARG_CONTEXT, IARG_END);
        }
    }
    else if (KnobOnStackContextOnly)
    {
        INS_InsertCall(ins, IPOINT_BEFORE, (AFUNPTR) ReceiveContext,  IARG_CONTEXT, IARG_END);
    }
    else if (KnobGetSpillAreaContextOnly)
    {
        INS_InsertCall(ins, IPOINT_BEFORE, (AFUNPTR) ReceiveContext,  IARG_CONST_CONTEXT, IARG_END);
    }
}

开发者ID:FengXingYuXin，项目名称:SHMA，代码行数:21，代码来源:context_stack_and_spill.cpp

示例12: Instruction

// Pin calls this function every time a new instruction is encountered
VOID Instruction(INS ins, VOID *v)
{
    
    INS_InsertCall(ins, IPOINT_BEFORE, (AFUNPTR)ReadWriteFlags_asm, IARG_END);
}

开发者ID:dcashman，项目名称:Coursework，代码行数:6，代码来源:analysis_flag_overwrite_tool1.cpp

示例13: Instruction

VOID Instruction(INS ins, VOID *v)
{
    INS_InsertCall(ins, IPOINT_BEFORE, (AFUNPTR)setdf, IARG_FAST_ANALYSIS_CALL, IARG_END);
}

开发者ID:alagenchev，项目名称:school_code，代码行数:4，代码来源:set_df_flag_tool.cpp

示例14: Trace

VOID Trace(TRACE trace, VOID *v)
{
    const BOOL print_args = KnobPrintArgs.Value();
    
        
    for (BBL bbl = TRACE_BblHead(trace); BBL_Valid(bbl); bbl = BBL_Next(bbl))
    {
        INS tail = BBL_InsTail(bbl);
        
        if( INS_IsCall(tail) )
        {
            if( INS_IsDirectBranchOrCall(tail) )
            {
                const ADDRINT target = INS_DirectBranchOrCallTargetAddress(tail);
                if( print_args )
                {
                    INS_InsertPredicatedCall(tail, IPOINT_BEFORE, AFUNPTR(do_call_args),
                                             IARG_PTR, Target2String(target), IARG_G_ARG0_CALLER, IARG_END);
                }
                else
                {
                    INS_InsertPredicatedCall(tail, IPOINT_BEFORE, AFUNPTR(do_call),
                                             IARG_PTR, Target2String(target), IARG_END);
                }
                
            }
            else
            {
                if( print_args )
                {
                    INS_InsertCall(tail, IPOINT_BEFORE, AFUNPTR(do_call_args_indirect),
                                   IARG_BRANCH_TARGET_ADDR, IARG_BRANCH_TAKEN,  IARG_G_ARG0_CALLER, IARG_END);
                }
                else
                {
                    INS_InsertCall(tail, IPOINT_BEFORE, AFUNPTR(do_call_indirect),
                                   IARG_BRANCH_TARGET_ADDR, IARG_BRANCH_TAKEN, IARG_END);
                }
                
                
            }
        }
        else
        {
            // sometimes code is not in an image
            RTN rtn = TRACE_Rtn(trace);
            
            // also track stup jumps into share libraries
            if( RTN_Valid(rtn) && !INS_IsDirectBranchOrCall(tail) && ".plt" == SEC_Name( RTN_Sec( rtn ) ))
            {
                if( print_args )
                {
                    INS_InsertCall(tail, IPOINT_BEFORE, AFUNPTR(do_call_args_indirect),
                                   IARG_BRANCH_TARGET_ADDR, IARG_BRANCH_TAKEN,  IARG_G_ARG0_CALLER, IARG_END);
                }
                else
                {
                    INS_InsertCall(tail, IPOINT_BEFORE, AFUNPTR(do_call_indirect),
                                   IARG_BRANCH_TARGET_ADDR, IARG_BRANCH_TAKEN, IARG_END);

                }
            }
        }
        
    }
}

开发者ID:alagenchev，项目名称:school_code，代码行数:66，代码来源:calltrace.cpp

示例15: log_ins

void log_ins(INS ins)
{
    // dump the instruction
    INS_InsertCall(ins, IPOINT_BEFORE, (AFUNPTR) &execute_instruction,
        IARG_INST_PTR, IARG_PTR, strdup(INS_Disassemble(ins).c_str()),
        IARG_END);

    // reads memory (1)
    if(INS_IsMemoryRead(ins) != 0) {
        INS_InsertCall(ins, IPOINT_BEFORE, (AFUNPTR) &dump_read_memory,
            IARG_MEMORYREAD_EA, IARG_MEMORYREAD_SIZE, IARG_END);
    }

    // reads memory (2)
    if(INS_HasMemoryRead2(ins) != 0) {
        INS_InsertCall(ins, IPOINT_BEFORE, (AFUNPTR) &dump_read_memory,
            IARG_MEMORYREAD2_EA, IARG_MEMORYREAD_SIZE, IARG_END);
    }

    IPOINT after = IPOINT_AFTER;
    if(INS_IsCall(ins) != 0) {
        // TODO is this correct?
        after = IPOINT_TAKEN_BRANCH;
    }
    else if(INS_IsSyscall(ins) != 0) {
        // TODO support syscalls
        return;
    }
    else if(INS_HasFallThrough(ins) == 0 && (INS_IsBranch(ins) != 0 ||
            INS_IsRet(ins) != 0)) {
        // TODO is this correct?
        after = IPOINT_TAKEN_BRANCH;
    }

    // dump written memory
    if(INS_IsMemoryWrite(ins) != 0) {
        INS_InsertCall(ins, IPOINT_BEFORE,
            (AFUNPTR) &dump_written_memory_before, IARG_MEMORYWRITE_EA,
            IARG_MEMORYWRITE_SIZE, IARG_END);

        INS_InsertCall(ins, after, (AFUNPTR) &dump_written_memory_after,
            IARG_END);
    }

    // dump all affected registers
    for (UINT32 i = 0; i < INS_OperandCount(ins); i++) {
        if(INS_OperandIsMemory(ins, i) != 0) {
            if(INS_OperandMemoryBaseReg(ins, i) != REG_INVALID()) {
                REG base_reg = INS_OperandMemoryBaseReg(ins, i);

                if(g_reg_index[base_reg] != 0) {
                    INS_InsertCall(ins, IPOINT_BEFORE,
                        (AFUNPTR) &dump_reg_before,
                        IARG_UINT32, g_reg_index[base_reg]-1,
                        IARG_REG_VALUE, INS_OperandMemoryBaseReg(ins, i),
                        IARG_END);

                    INS_InsertCall(ins, after,
                        (AFUNPTR) &dump_reg_r_after,
                        IARG_UINT32, g_reg_index[base_reg]-1, IARG_END);
                }
            }
            if(INS_OperandMemoryIndexReg(ins, i) != REG_INVALID()) {
                REG index_reg = INS_OperandMemoryIndexReg(ins, i);

                if(g_reg_index[index_reg] != 0) {
                    INS_InsertCall(ins, IPOINT_BEFORE,
                        (AFUNPTR) &dump_reg_before,
                        IARG_UINT32, g_reg_index[index_reg]-1,
                        IARG_REG_VALUE, INS_OperandMemoryIndexReg(ins, i),
                        IARG_END);

                    INS_InsertCall(ins, after,
                        (AFUNPTR) &dump_reg_r_after,
                        IARG_UINT32, g_reg_index[index_reg]-1, IARG_END);
                }
            }
        }
        if(INS_OperandIsReg(ins, i) != 0) {
            REG reg_index = REG_FullRegName(INS_OperandReg(ins, i));

            if(INS_OperandReadAndWritten(ins, i) != 0) {
                if(g_reg_index[reg_index] != 0) {
                    INS_InsertCall(ins, IPOINT_BEFORE,
                        (AFUNPTR) &dump_reg_before,
                        IARG_UINT32, g_reg_index[reg_index]-1,
                        IARG_REG_VALUE, reg_index, IARG_END);

                    INS_InsertCall(ins, after, (AFUNPTR) &dump_reg_rw_after,
                        IARG_UINT32, g_reg_index[reg_index]-1,
                        IARG_REG_VALUE, reg_index, IARG_END);
                }
            }
            else if(INS_OperandRead(ins, i) != 0) {
                if(g_reg_index[reg_index] != 0) {
                    INS_InsertCall(ins, IPOINT_BEFORE,
                        (AFUNPTR) &dump_reg_before,
                        IARG_UINT32, g_reg_index[reg_index]-1,
                        IARG_REG_VALUE, reg_index, IARG_END);

//.........这里部分代码省略.........

开发者ID:anuragshandilya，项目名称:zecart，代码行数:101，代码来源:logging.cpp

示例16: Insert

 void Insert(INT32 frameSize)
 {
     INS_InsertCall(_ins, IPOINT_BEFORE, _afunptr, IARG_FAST_ANALYSIS_CALL, IARG_REG_VALUE, scratch_reg0, IARG_ADDRINT, ADDRINT(_offset - frameSize), _itype, IARG_END);
 }

开发者ID:FengXingYuXin，项目名称:SHMA，代码行数:4，代码来源:memtrace.cpp

示例17: Trace

static VOID Trace(TRACE trace, VOID *v)
{
    RTN rtn = TRACE_Rtn(trace);
    
    ADDRINT version = TRACE_Version(trace);
    // If we are not in watch_rtn, switch back to base version
    if (!RTN_Valid(rtn) || RTN_Name(rtn) != watch_rtn)
    {
        if (version != VERSION_BASE)
            BBL_SetTargetVersion(TRACE_BblHead(trace), VERSION_BASE);
        return;
    }

    if (TRACE_Address(trace) == RTN_Address(rtn)) {
        INS ins = BBL_InsHead(TRACE_BblHead(trace));
        if (version == VERSION_BASE) 
        {
            // version_reg is used to select the version, use the first
            // argument of watch_rtn to set it
            INS_InsertCall(ins, IPOINT_BEFORE, AFUNPTR(select_version),
                           IARG_FUNCARG_ENTRYPOINT_VALUE, 0,
                           IARG_RETURN_REGS, version_reg,
                           IARG_CALL_ORDER, CALL_ORDER_FIRST,
                           IARG_END);
        }
    }

    INS ins = BBL_InsHead(TRACE_BblHead(trace));
    for (BBL bbl = TRACE_BblHead(trace); BBL_Valid(bbl); bbl = BBL_Next(bbl)) 
    {
        // Instrumentation depends on version
        // These instrumentations occur after the following version instrumentation
        // (i.e. the instrumentation inserted by the below INS_InsertVersionCase calls)
        // This is due to the use of IARG_CALL_ORDER, CALL_ORDER_FIRST in the below
        // INS_InsertVersionCase calls.
        switch(version) {
          case VERSION_BASE:
            INS_InsertCall(ins, IPOINT_BEFORE, AFUNPTR(Emit),
                             IARG_PTR, "version base", IARG_END);
            break;
          case VERSION_1:
            INS_InsertCall(ins, IPOINT_BEFORE, AFUNPTR(Emit),
                             IARG_PTR, "version 1", IARG_END);
            break;
          case VERSION_2:
            INS_InsertCall(ins, IPOINT_BEFORE, AFUNPTR(Emit),
                             IARG_PTR, "version 2", IARG_END);
            break;
          default:
            assert(0);
            break;
        }
    }

    // If we are at the entry point, select the version
    if (TRACE_Address(trace) == RTN_Address(rtn)) {
        INS ins = BBL_InsHead(TRACE_BblHead(trace));

        // IF we are in the base version, decide if we should go to the
        // other versions
        if (version == VERSION_BASE) 
        {
            INS_InsertVersionCase(ins, version_reg, 10, VERSION_1, IARG_CALL_ORDER, CALL_ORDER_FIRST, IARG_END);
            INS_InsertVersionCase(ins, version_reg, 20, VERSION_2, IARG_CALL_ORDER, CALL_ORDER_FIRST, IARG_END);
            printf ("Instrumentation at %p\n", reinterpret_cast<void *>(INS_Address(ins)));
        }
    }
}

开发者ID:alagenchev，项目名称:school_code，代码行数:68，代码来源:special_case3.cpp

示例18: I_Trace

// -------------------------------------------------------------
// Trace instrumentation function
// -------------------------------------------------------------
void I_Trace(TRACE trace, void *v) {

    BOOL isPLT = IsPLT(TRACE_Rtn(trace));

    #if DEBUG_INS    
    printf("-- Instrumenting trace %X of function %s\n", 
        TRACE_Address(trace), RTN_Valid(TRACE_Rtn(trace)) ? RTN_Name(TRACE_Rtn(trace)).c_str() : "<unknown_routine>");
    #endif

    // scan BBLs within the current trace
    for (BBL bbl = TRACE_BblHead(trace); BBL_Valid(bbl); bbl = BBL_Next(bbl)) {

    	// instrument memory reads and writes
    	for(INS ins = BBL_InsHead(bbl); INS_Valid(ins); ins = INS_Next(ins))
    	    Instruction(ins);

        INS tail = BBL_InsTail(bbl);

        // skip system calls
        if ( INS_IsSyscall(tail) ) continue;
        
        // instrument .plt stub calls
        if ( isPLT ) {

            #if DEBUG_INS
            printf("   > .plt stub call\n");
            #endif

            if (gSetup.callingSite) {
                if (gSetup.memBuf)
                    INS_InsertCall(tail, IPOINT_BEFORE, 
                                (AFUNPTR)A_ProcessIndirectCallCSBuf,
                                IARG_FAST_ANALYSIS_CALL,
                                IARG_INST_PTR,
                                IARG_BRANCH_TARGET_ADDR,
                                IARG_REG_VALUE, REG_STACK_PTR,
                                IARG_THREAD_ID,
                                IARG_CONTEXT,
                                IARG_END);
                else
                    INS_InsertCall(tail, IPOINT_BEFORE, 
                                (AFUNPTR)A_ProcessIndirectCallCS,
                                IARG_FAST_ANALYSIS_CALL,
                                IARG_INST_PTR,
                                IARG_BRANCH_TARGET_ADDR,
                                IARG_REG_VALUE, REG_STACK_PTR,
                                IARG_THREAD_ID,
                                IARG_END);
            }
            else {
                if (gSetup.memBuf)
                    INS_InsertCall(tail, IPOINT_BEFORE, 
                                (AFUNPTR)A_ProcessIndirectCallBuf,
                                IARG_FAST_ANALYSIS_CALL,
                                IARG_BRANCH_TARGET_ADDR,
                                IARG_REG_VALUE, REG_STACK_PTR,
                                IARG_THREAD_ID,
                                IARG_CONTEXT,
                                IARG_END);
                else
                    INS_InsertCall(tail, IPOINT_BEFORE, 
                                (AFUNPTR)A_ProcessIndirectCall,
                                IARG_FAST_ANALYSIS_CALL,
                                IARG_BRANCH_TARGET_ADDR,
                                IARG_REG_VALUE, REG_STACK_PTR,
                                IARG_THREAD_ID,
                                IARG_END);
            }
            continue;
        }

        // instrument all calls and returns
        if ( INS_IsCall(tail) ) {
        
            // direct call
            if( INS_IsDirectBranchOrCall(tail) ) {

                // get target address
                ADDRINT target = Target2FunAddr(INS_DirectBranchOrCallTargetAddress(tail));

                #if DEBUG_INS
                printf("   > Direct call to %s\n", Target2RtnName(target).c_str());
                #endif

                // instrument direct call: target address determined here
                if (gSetup.callingSite) {
                    if (gSetup.memBuf)
                        INS_InsertPredicatedCall(tail, IPOINT_BEFORE,
                                              (AFUNPTR)A_ProcessDirectCallCSBuf,
                                              IARG_FAST_ANALYSIS_CALL,
                                              IARG_INST_PTR,
                                              IARG_ADDRINT, target,
                                              IARG_REG_VALUE, REG_STACK_PTR,
                                              IARG_THREAD_ID,
                                              IARG_CONTEXT,
                                              IARG_END);
                    else
//.........这里部分代码省略.........

开发者ID:chubbymaggie，项目名称:hcct，代码行数:101，代码来源:STool_PIN.cpp

示例19: Instruction

VOID Instruction(INS ins, VOID *v)
{
  	INS_InsertCall(ins, IPOINT_BEFORE, (AFUNPTR)AnalysisFunc, IARG_CONST_CONTEXT, IARG_END);
}

开发者ID:andrewjinyounglee，项目名称:PerVERT，代码行数:4，代码来源:reg_context_set_const_context.cpp

示例20: Ins

VOID Ins(INS ins, VOID * v)
{
    INS_InsertCall(ins, IPOINT_BEFORE, AFUNPTR(DoExit), IARG_END);
    INS_InsertCall(ins, IPOINT_BEFORE, AFUNPTR(NeverCalled), IARG_ADDRINT, 0, IARG_END);
}

开发者ID:FengXingYuXin，项目名称:SHMA，代码行数:5，代码来源:earlyout.cpp

注：本文中的INS_InsertCall函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ INS_Next函数代码示例发布时间：2022-05-30

C++ INS_Address函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19221|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9996|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8331|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8700|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8644|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9666|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8630|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：8004|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8664|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7539|2022-11-06

客服电话

电子邮件

C++ INS_InsertCall函数代码示例

示例1: MemoryTrace

示例2: Trace

示例3: Ins

示例4: Instruction

示例5: EmulateLoad

示例6: Instruction

示例7: Trace

示例8: Instruction

示例9: insertRepMemoryCountInstrumentation

示例10: Instruction

示例11: Instruction

示例12: Instruction

示例13: Instruction

示例14: Trace

示例15: log_ins

示例16: Insert

示例17: Trace

示例18: I_Trace

示例19: Instruction

示例20: Ins

请发表评论

全部评论

上一篇：

下一篇：

Delphi7客户端调用WebService（天气预报）

bradtraversy/iweather: Ionic 3 mobile we

joaomh/curso-de-matlab

断牙刷新位置时间（断牙属性及刷新位置介绍

rugk/mastodon-simplified-federation: Sim

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053