C++ HAL_TIM_PWM_Init函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中HAL_TIM_PWM_Init函数的典型用法代码示例。如果您正苦于以下问题：C++ HAL_TIM_PWM_Init函数的具体用法？C++ HAL_TIM_PWM_Init怎么用？C++ HAL_TIM_PWM_Init使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了HAL_TIM_PWM_Init函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: main

/**
  * @brief  Main program
  * @param  None
  * @retval None
  */
int main(void)
{
  /* STM32F4xx HAL library initialization:
       - Configure the Flash prefetch, instruction and Data caches
       - Configure the Systick to generate an interrupt each 1 msec
       - Set NVIC Group Priority to 4
       - Global MSP (MCU Support Package) initialization
     */
  HAL_Init();
  
  /* Configure the system clock to 180 Mhz */
  SystemClock_Config();

  /* Configure LED3 */
  BSP_LED_Init(LED3);

  /* Compute the prescaler value to have TIM1 counter clock equal to 18 MHz */
  uwPrescalerValue = (uint32_t) (SystemCoreClock  / 18000000) - 1;

  
  /*##-1- Configure the TIM peripheral #######################################*/ 
  /* Initialize TIM peripheral as follow:
       + Prescaler = SystemCoreClock/18000000
       + Period = 1799  (to have an output frequency equal to 10 KHz)
       + ClockDivision = 0
       + Counter direction = Up
  */
  /* Select the Timer instance */
  TimHandle.Instance = TIM1;
  
  TimHandle.Init.Prescaler     = uwPrescalerValue;
  TimHandle.Init.Period        = PERIOD_VALUE;
  TimHandle.Init.ClockDivision = 0;
  TimHandle.Init.CounterMode   = TIM_COUNTERMODE_UP;
  if(HAL_TIM_PWM_Init(&TimHandle) != HAL_OK)
  {
    /* Initialization Error */
    Error_Handler();
  }
  
  /*##-2- Configure the PWM channels #########################################*/ 
  /* Common configuration for all channels */
  sPWMConfig.OCMode       = TIM_OCMODE_PWM1;
  sPWMConfig.OCPolarity   = TIM_OCPOLARITY_HIGH;
  sPWMConfig.OCNPolarity  = TIM_OCNPOLARITY_HIGH;
  sPWMConfig.OCIdleState  = TIM_OCIDLESTATE_SET;
  sPWMConfig.OCNIdleState = TIM_OCNIDLESTATE_RESET;  

  /* Set the pulse value for channel 1 */
  sPWMConfig.Pulse = PULSE1_VALUE;  
  if(HAL_TIM_PWM_ConfigChannel(&TimHandle, &sPWMConfig, TIM_CHANNEL_1) != HAL_OK)
  {
    /* Configuration Error */
    Error_Handler();
  }
  
  /* Set the pulse value for channel 2 */
  sPWMConfig.Pulse = PULSE2_VALUE;
  if(HAL_TIM_PWM_ConfigChannel(&TimHandle, &sPWMConfig, TIM_CHANNEL_2) != HAL_OK)
  {
    /* Configuration Error */
    Error_Handler();
  }
  
  /* Set the pulse value for channel 3 */
  sPWMConfig.Pulse = PULSE3_VALUE;
  if(HAL_TIM_PWM_ConfigChannel(&TimHandle, &sPWMConfig, TIM_CHANNEL_3) != HAL_OK)
  {
    /* Configuration Error */
    Error_Handler();
  }
  
  /* Set the Break feature & Dead time */
  sBreakConfig.BreakState       = TIM_BREAK_ENABLE;
  sBreakConfig.DeadTime         = 11;
  sBreakConfig.OffStateRunMode  = TIM_OSSR_ENABLE;
  sBreakConfig.OffStateIDLEMode = TIM_OSSI_ENABLE;
  sBreakConfig.LockLevel        = TIM_LOCKLEVEL_1;  
  sBreakConfig.BreakPolarity    = TIM_BREAKPOLARITY_HIGH;
  sBreakConfig.AutomaticOutput  = TIM_AUTOMATICOUTPUT_ENABLE;
  
  if(HAL_TIMEx_ConfigBreakDeadTime(&TimHandle, &sBreakConfig) != HAL_OK)
  {
    /* Configuration Error */
    Error_Handler();
  }
  
  /*##-3- Start PWM signals generation #######################################*/ 
  /* Start channel 1 */
  if(HAL_TIM_PWM_Start(&TimHandle, TIM_CHANNEL_1) != HAL_OK)
  {
    /* Starting Error */
    Error_Handler();
  }
  /* Start channel 1N */
//.........这里部分代码省略.........

开发者ID:EarnestHein89，项目名称:STM32Cube_FW_F4，代码行数:101，代码来源:main.c

示例2: SC_TIM4_Init

/* TIM4 init function */
void SC_TIM4_Init(SERVO_CONTROLLER_Frequency frequency)
{

  TIM_ClockConfigTypeDef sClockSourceConfig;
  TIM_MasterConfigTypeDef sMasterConfig;
  TIM_OC_InitTypeDef sConfigOC;

  htim4.Instance = TIM4;
  htim4.Init.Prescaler = CORE_FCLK / TIM_FCLK - 1;;
  htim4.Init.CounterMode = TIM_COUNTERMODE_UP;
  htim4.Init.Period = (uint16_t)(TIM_FCLK / frequency);   //should not exceed 0xFFFF
  htim4.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
  HAL_TIM_Base_Init(&htim4);

  sClockSourceConfig.ClockSource = TIM_CLOCKSOURCE_INTERNAL;
  HAL_TIM_ConfigClockSource(&htim4, &sClockSourceConfig);

  HAL_TIM_PWM_Init(&htim4);

  sMasterConfig.MasterOutputTrigger = TIM_TRGO_RESET;
  sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;
  HAL_TIMEx_MasterConfigSynchronization(&htim4, &sMasterConfig);

  sConfigOC.OCMode = TIM_OCMODE_PWM1;
  sConfigOC.Pulse = 0;
  sConfigOC.OCPolarity = TIM_OCPOLARITY_HIGH;
  sConfigOC.OCFastMode = TIM_OCFAST_DISABLE;
  HAL_TIM_PWM_ConfigChannel(&htim4, &sConfigOC, TIM_CHANNEL_1);

  HAL_TIM_PWM_ConfigChannel(&htim4, &sConfigOC, TIM_CHANNEL_2);

  HAL_TIM_PWM_ConfigChannel(&htim4, &sConfigOC, TIM_CHANNEL_3);

  HAL_TIM_PWM_ConfigChannel(&htim4, &sConfigOC, TIM_CHANNEL_4);

}

开发者ID:itsergeyla，项目名称:Quadruped，代码行数:37，代码来源:ServoController.c

示例3: MX_TIM2_Init

/* TIM2 init function */
void MX_TIM2_Init(void)
{

  TIM_ClockConfigTypeDef sClockSourceConfig;
  TIM_MasterConfigTypeDef sMasterConfig;
  TIM_OC_InitTypeDef sConfigOC;

  htim2.Instance = TIM2;
  htim2.Init.Prescaler = 24;
  htim2.Init.CounterMode = TIM_COUNTERMODE_UP;
  htim2.Init.Period = 200;
  htim2.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
  HAL_TIM_Base_Init(&htim2);

  sClockSourceConfig.ClockSource = TIM_CLOCKSOURCE_INTERNAL;
  HAL_TIM_ConfigClockSource(&htim2, &sClockSourceConfig);

  HAL_TIM_PWM_Init(&htim2);

  sMasterConfig.MasterOutputTrigger = TIM_TRGO_RESET;
  sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;
  HAL_TIMEx_MasterConfigSynchronization(&htim2, &sMasterConfig);

  sConfigOC.OCMode = TIM_OCMODE_PWM1;
  sConfigOC.Pulse = 0;
  sConfigOC.OCPolarity = TIM_OCPOLARITY_HIGH;
  sConfigOC.OCFastMode = TIM_OCFAST_DISABLE;
  HAL_TIM_PWM_ConfigChannel(&htim2, &sConfigOC, TIM_CHANNEL_1);

  HAL_TIM_PWM_ConfigChannel(&htim2, &sConfigOC, TIM_CHANNEL_2);

  HAL_TIM_PWM_ConfigChannel(&htim2, &sConfigOC, TIM_CHANNEL_3);

  HAL_TIM_MspPostInit(&htim2);

}

开发者ID:bens-unit01，项目名称:stm32-tests，代码行数:37，代码来源:main.c

示例4: MX_TIM4_Init

/* TIM4 init function */
void MX_TIM4_Init(void)
{

  TIM_OC_InitTypeDef sConfigOC;
  TIM_MasterConfigTypeDef sMasterConfig;

  htim4.Instance = TIM4;
  htim4.Init.Prescaler = 1800;
  htim4.Init.CounterMode = TIM_COUNTERMODE_UP;
  htim4.Init.Period = 10;
  htim4.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
  HAL_TIM_PWM_Init(&htim4);

  sConfigOC.OCMode = TIM_OCMODE_PWM1;
  sConfigOC.Pulse = 5;
  sConfigOC.OCPolarity = TIM_OCPOLARITY_HIGH;
  sConfigOC.OCFastMode = TIM_OCFAST_DISABLE;
  HAL_TIM_PWM_ConfigChannel(&htim4, &sConfigOC, TIM_CHANNEL_4);

  sMasterConfig.MasterOutputTrigger = TIM_TRGO_RESET;
  sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;
  HAL_TIMEx_MasterConfigSynchronization(&htim4, &sMasterConfig);

}

开发者ID:BGCX261，项目名称:zhonx3-svn-to-git，代码行数:25，代码来源:main.c

示例5: pwmout_period_us

void pwmout_period_us(pwmout_t* obj, int us)
{
    TimHandle.Instance = (TIM_TypeDef *)(obj->pwm);

    float dc = pwmout_read(obj);

    __HAL_TIM_DISABLE(&TimHandle);

    SystemCoreClockUpdate();

    TimHandle.Init.Period        = us - 1;
    TimHandle.Init.Prescaler     = (uint16_t)(SystemCoreClock / 1000000) - 1; // 1 us tick
    TimHandle.Init.ClockDivision = 0;
    TimHandle.Init.CounterMode   = TIM_COUNTERMODE_UP;
    HAL_TIM_PWM_Init(&TimHandle);

    // Set duty cycle again
    pwmout_write(obj, dc);

    // Save for future use
    obj->period = us;

    __HAL_TIM_ENABLE(&TimHandle);
}

开发者ID:utemkin，项目名称:mbed，代码行数:24，代码来源:pwmout_api.c

示例6: Time3Enable

void Time3Enable(unsigned int timvalue)
{
	 uwPrescalerValue = ((SystemCoreClock ) / 16000000) - 1;
	 TimHandle.Instance = TIM3;
  
  TimHandle.Init.Prescaler     = uwPrescalerValue;
  TimHandle.Init.Period        = 600;
  TimHandle.Init.ClockDivision = 0;
  TimHandle.Init.CounterMode   = TIM_COUNTERMODE_UP;
  if(HAL_TIM_PWM_Init(&TimHandle) != HAL_OK)
  {
    /* Initialization Error */
    Error_Handler();
  }
  
  /*##-2- Configure the PWM channels #########################################*/ 
  /* Common configuration for all channels */
  sConfig.OCMode     = TIM_OCMODE_PWM1;
  sConfig.OCPolarity = TIM_OCPOLARITY_HIGH;
  sConfig.OCFastMode = TIM_OCFAST_DISABLE;
	
	/* Set the pulse value for channel 3 */
  sConfig.Pulse = timvalue;
  if(HAL_TIM_PWM_ConfigChannel(&TimHandle, &sConfig, TIM_CHANNEL_3) != HAL_OK)
  {
    /* Configuration Error */
    Error_Handler();
  }
	/* Start channel 3 */
  if(HAL_TIM_PWM_Start(&TimHandle, TIM_CHANNEL_3) != HAL_OK)
  {
    /* Starting Error */
    Error_Handler();
  }
	
}

开发者ID:dongkc，项目名称:cleaner，代码行数:36，代码来源:main1.c

示例7: main

/**
  * @brief  Main program.
  * @param  None
  * @retval None
  */
int main(void)
{

  /* STM32F3xx HAL library initialization:
       - Configure the Flash prefetch
       - Systick timer is configured by default as source of time base, but user 
         can eventually implement his proper time base source (a general purpose 
         timer for example or other time source), keeping in mind that Time base 
         duration should be kept 1ms since PPP_TIMEOUT_VALUEs are defined and 
         handled in milliseconds basis.
       - Set NVIC Group Priority to 4
       - Low Level Initialization
     */
  HAL_Init();

  /* Configure LED3 */
  BSP_LED_Init(LED3);

  /* Configure the system clock to have a system clock = 72 Mhz */
  SystemClock_Config();

  /* Compute the value of ARR regiter to generate signal frequency at 17.57 Khz */
  uhTimerPeriod = (uint32_t) ((SystemCoreClock / 17570 ) - 1);
  /* Compute CCR1 value to generate a duty cycle at 75% */
  aCCValue_Buffer[0] = (uint32_t)(((uint32_t) 75 * (uhTimerPeriod - 1)) / 100);
  /* Compute CCR2 value to generate a duty cycle at 50% */
  aCCValue_Buffer[1] = (uint32_t)(((uint32_t) 50 * (uhTimerPeriod - 1)) / 100);
  /* Compute CCR3 value to generate a duty cycle at 25% */
  aCCValue_Buffer[2] = (uint32_t)(((uint32_t) 25 * (uhTimerPeriod - 1)) / 100);
  
  
  /*##-1- Configure the TIM peripheral #######################################*/ 
  /* --------------------------------------------------------------------------- 
    TIM1 input clock (TIM1CLK) is set to APB2 clock (PCLK2), since APB2 
    prescaler is 1.   
    TIM1CLK = PCLK2  
    PCLK2 = HCLK
    => TIM1CLK = HCLK = SystemCoreClock
  
  TIM1CLK = SystemCoreClock, Prescaler = 0, TIM1 counter clock = SystemCoreClock
  SystemCoreClock is set to 72 MHz for STM32F3xx devices.

  The objective is to configure TIM1 channel 2 to generate complementary PWM
  signal with a frequency equal to 17.57 KHz:
     - TIM1_Period = (SystemCoreClock / 17570) - 1
  and a variable duty cycle that is changed by the DMA after a specific number of
  Update DMA request.

  The number of this repetitive requests is defined by the TIM1 Repetion counter,
  each 4 Update Requests, the TIM1 Channel 2 Duty Cycle changes to the next new 
  value defined by the aCCValue_Buffer.
  
    Note: 
     SystemCoreClock variable holds HCLK frequency and is defined in system_stm32f3xx.c file.
     Each time the core clock (HCLK) changes, user had to update SystemCoreClock 
     variable value. Otherwise, any configuration based on this variable will be incorrect.
     This variable is updated in three ways:
      1) by calling CMSIS function SystemCoreClockUpdate()
      2) by calling HAL API function HAL_RCC_GetSysClockFreq()
      3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency     
  -----------------------------------------------------------------------------*/
  /* Initialize TIM1 peripheral as follows:
      + Period = TimerPeriod (To have an output frequency equal to 17.570 KHz)
      + Repetition Counter = 3
      + Prescaler = 0
      + ClockDivision = 0
      + Counter direction = Up
  */
  TimHandle.Instance = TIMx;
  
  TimHandle.Init.Period            = uhTimerPeriod;
  TimHandle.Init.RepetitionCounter = 3;
  TimHandle.Init.Prescaler         = 0;
  TimHandle.Init.ClockDivision     = 0;
  TimHandle.Init.CounterMode       = TIM_COUNTERMODE_UP;
  if(HAL_TIM_PWM_Init(&TimHandle) != HAL_OK)
  {
    /* Initialization Error */
    Error_Handler();
  }

  /*##-2- Configure the PWM channel 2 ########################################*/ 
  sConfig.OCMode     = TIM_OCMODE_PWM1;
  sConfig.OCPolarity = TIM_OCPOLARITY_HIGH;
  sConfig.Pulse      = aCCValue_Buffer[0];
  if(HAL_TIM_PWM_ConfigChannel(&TimHandle, &sConfig, TIM_CHANNEL_2) != HAL_OK)
  {
    /* Configuration Error */
    Error_Handler();
  }

  /*##-3- Start PWM signal generation in DMA mode ############################*/ 
  if(HAL_TIM_PWM_Start_DMA(&TimHandle, TIM_CHANNEL_2, aCCValue_Buffer, 3) != HAL_OK)
  {
    /* Starting PWM generation Error */
//.........这里部分代码省略.........

开发者ID:eleciawhite，项目名称:STM32Cube，代码行数:101，代码来源:main.c

示例8: ultrasound

void ultrasound (uint8_t bridge){				//ez a fv egyszerre csak egy hidat hajt meg!
		uint16_t i,old_i,temp_i,f;
	uint32_t CH1,CH2,CHx,CHy,tim,tim_now;

		//bridge1=0,bridge2=1-> hogy melyik hidat hajtsa meg 
	if(bridge){						//bridge1
		CH1=(uint32_t)TIM_CHANNEL_1;
		CH2=(uint32_t)TIM_CHANNEL_2;
		CHx=(uint32_t)TIM_CHANNEL_3;
		CHy=(uint32_t)TIM_CHANNEL_4;
	}else{								//bridge2
		CH1=(uint32_t)TIM_CHANNEL_3;
		CH2=(uint32_t)TIM_CHANNEL_4;
		CHx=(uint32_t)TIM_CHANNEL_1;
		CHy=(uint32_t)TIM_CHANNEL_2;
	}
			SystemClock_Config_48MHz();
	HAL_Delay(20);
	MX_TIM3_Init();

	HAL_TIM_PWM_Init(&htim3);

		
	sConfigOC.OCMode = TIM_OCMODE_PWM1;
  sConfigOC.Pulse = 0;
  sConfigOC.OCPolarity = TIM_OCPOLARITY_LOW;
  sConfigOC.OCFastMode = TIM_OCFAST_DISABLE;

			HAL_TIM_PWM_ConfigChannel( &htim3 , &sConfigOC , CH1);
	  sConfigOC.OCPolarity = TIM_OCPOLARITY_HIGH;
			HAL_TIM_PWM_ConfigChannel( &htim3 , &sConfigOC , CH2);
			HAL_TIM_PWM_ConfigChannel( &htim3 , &sConfigOC , CHx);
			HAL_TIM_PWM_ConfigChannel( &htim3 , &sConfigOC , CHy);

			HAL_TIM_PWM_Start(&htim3, CH1);
			HAL_TIM_PWM_Start(&htim3, CH2);
			HAL_TIM_PWM_Start(&htim3, CHx);
			HAL_TIM_PWM_Start(&htim3, CHy);


	//csattanás csökkentés, 19khz kiadás eloszor
			
			HAL_GPIO_WritePin( DCDC_EN_GPIO_Port , DCDC_EN_Pin , 0 );	
		//	HAL_GPIO_WritePin( DCDC_PWR_GPIO_Port , DCDC_PWR_Pin , 0 );									//open drain kimenet,pch fet,
//*****************************************	
	/*for( i=900 ; i >= 620 ; i-=3){
							
			__HAL_TIM_SetAutoreload(&htim3,i*2);				
			__HAL_TIM_SetCompare(&htim3,CH1, i);
			__HAL_TIM_SetCompare(&htim3,CH2, i);

							HAL_Delay(1);
						}*/
	/***********************************	
						HAL_Delay(100);						
			__HAL_TIM_SetAutoreload(&htim3,i*2);				
			__HAL_TIM_SetCompare(&htim3,CH1, i);
			__HAL_TIM_SetCompare(&htim3,CH2, i);
						HAL_Delay(1000);*/
			HAL_GPIO_WritePin( DCDC_EN_GPIO_Port , DCDC_EN_Pin , 1 );								
			HAL_Delay(100);

		//19KHz-620  // 27KHz-440
				old_i=i;
		for(uint8_t x=0; x < soundNum; x++){
			
		// a következo hanghoz kis lépésenként jutunk, ígty nincs csattanás
			
			srand(HAL_GetTick());
			i=(rand()%210)+440;		
			//i=210+440;
		/*
			if(	old_i	<	i){
										
					// ha az új hang kissebb frekvenciájó -> nagyobb i
				for(	temp_i=old_i	;	i	>=	temp_i;	temp_i++){
			
			__HAL_TIM_SetAutoreload(&htim3,temp_i*2);				
			__HAL_TIM_SetCompare(&htim3,CH1, temp_i);
			__HAL_TIM_SetCompare(&htim3,CH2, temp_i);
					HAL_Delay(1);
				}
					
			}else{
				//ha az uj hang nagypbb frekvenciáju-> kisebb i
				for(	temp_i=old_i	;	i	<=	temp_i;	temp_i--){
			
			__HAL_TIM_SetAutoreload(&htim3,temp_i*2);				
			__HAL_TIM_SetCompare(&htim3,CH1, temp_i);
			__HAL_TIM_SetCompare(&htim3,CH2, temp_i);
					HAL_Delay(1);
				}
			}
			*/
			
						__HAL_TIM_SetAutoreload(&htim3,i*2);				
						__HAL_TIM_SetCompare(&htim3,CH1, i);
						__HAL_TIM_SetCompare(&htim3,CH2, i);
						
			
//.........这里部分代码省略.........

开发者ID:Csatacsibe，项目名称:Vadalarm_quad，代码行数:101，代码来源:main.c

示例9: uartTester

void uartTester(){
	//UART fogadás, teszteléshez ---------------------------------------------------------

		uint8_t pData;
		PutString("S");

		HAL_UART_Receive(&huart1,&pData,1,100);
		if(pData=='O'){
			HAL_GPIO_TogglePin(Kimenet_GPIO_Port,Kimenet_Pin);

			PutString("R");
			
			
				HAL_UART_Receive(&huart1,&pData,1,1000);
			while(pData != 'A')
							HAL_UART_Receive(&huart1,&pData,1,1000);
			
		HAL_GPIO_WritePin( DCDC_EN_GPIO_Port , DCDC_EN_Pin , 1 );	
			
		PutString("R");
			
				HAL_UART_Receive(&huart1,&pData,8,1000);
			while(pData != 'B')
							HAL_UART_Receive(&huart1,&pData,8,1000);
			
			
			soundNum=1;
			sounDelay=10;
									
	SystemClock_Config_48MHz();
	HAL_Delay(2);
	MX_TIM3_Init();

	HAL_TIM_PWM_Init(&htim3);

		
	sConfigOC.OCMode = TIM_OCMODE_PWM1;
  sConfigOC.Pulse = 0;
  sConfigOC.OCPolarity = TIM_OCPOLARITY_LOW;
  sConfigOC.OCFastMode = TIM_OCFAST_DISABLE;

			HAL_TIM_PWM_ConfigChannel( &htim3 , &sConfigOC , TIM_CHANNEL_1);
	  sConfigOC.OCPolarity = TIM_OCPOLARITY_HIGH;
			HAL_TIM_PWM_ConfigChannel( &htim3 , &sConfigOC , TIM_CHANNEL_2);
			HAL_GPIO_TogglePin(Kimenet_GPIO_Port,Kimenet_Pin);
					HAL_TIM_PWM_Start(&htim3, TIM_CHANNEL_1);
			HAL_TIM_PWM_Start(&htim3, TIM_CHANNEL_2);
			uint16_t i=630;
		__HAL_TIM_SetAutoreload(&htim3,i*2);				
			__HAL_TIM_SetCompare(&htim3,TIM_CHANNEL_1, i);
			__HAL_TIM_SetCompare(&htim3,TIM_CHANNEL_2, i);	
				HAL_Delay(500);
				
			PutString("R");
			
				HAL_UART_Receive(&huart1,&pData,8,1000);
			while(pData != 'C')
							HAL_UART_Receive(&huart1,&pData,8,1000);
		
		HAL_GPIO_WritePin( DCDC_EN_GPIO_Port , DCDC_EN_Pin , 0);				
		HAL_TIM_PWM_Stop( &htim3 , TIM_CHANNEL_1 );
		HAL_TIM_PWM_Stop( &htim3 , TIM_CHANNEL_2 );
		HAL_TIM_PWM_DeInit( &htim3 );
			SystemClock_Config_8MHz();
			
			HAL_ADC_MspDeInit(&hadc);
			HAL_UART_MspDeInit(&huart1);
			HAL_TIM_Base_DeInit(&htim3);
	
			

		
		while(1){
				HAL_GPIO_TogglePin(Kimenet_GPIO_Port,Kimenet_Pin);
				HAL_Delay(200);
		}
	}
}

开发者ID:Csatacsibe，项目名称:Vadalarm_quad，代码行数:78，代码来源:main.c

示例10: tracks_init

extern void tracks_init(){
  GPIO_InitTypeDef GPIO_InitStructure;
  TIM_OC_InitTypeDef PWMConfig;
  uint32_t PrescalerValue;

  __BRD_D4_GPIO_CLK();
  __BRD_D5_GPIO_CLK();
  __BRD_D6_GPIO_CLK();
  __BRD_D7_GPIO_CLK();

  //Track direction pins
  GPIO_InitStructure.Pin = BRD_D4_PIN;				//Pin
  GPIO_InitStructure.Mode = GPIO_MODE_OUTPUT_PP;		//Output Mode
  GPIO_InitStructure.Pull = GPIO_PULLDOWN;			//Enable Pull up, down or no pull resister
  GPIO_InitStructure.Speed = GPIO_SPEED_MEDIUM;			//Pin latency
  HAL_GPIO_Init(BRD_D4_GPIO_PORT, &GPIO_InitStructure);	//Initialise Pin

  GPIO_InitStructure.Pin = BRD_D7_PIN;				//Pin
  GPIO_InitStructure.Mode = GPIO_MODE_OUTPUT_PP;			//Input Mode
  GPIO_InitStructure.Pull = GPIO_PULLDOWN;			//Enable Pull up, down or no pull resister
  GPIO_InitStructure.Speed = GPIO_SPEED_MEDIUM;			//Pin latency
  HAL_GPIO_Init(BRD_D7_GPIO_PORT, &GPIO_InitStructure);	//Initialise Pin

  //Track ENABLE pins
  __TIM2_CLK_ENABLE();
  __TIM3_CLK_ENABLE();

   /* Compute the prescaler value. SystemCoreClock = 168000000 - set for 50Khz clock */
   PrescalerValue = (uint16_t) ((SystemCoreClock /2) / 1000000) - 1;

    //Track speed pins (PWM)
    GPIO_InitStructure.Pin = BRD_D5_PIN;				//Pin
    GPIO_InitStructure.Mode = GPIO_MODE_AF_PP; 		//Set mode to be output alternate
    GPIO_InitStructure.Pull = GPIO_NOPULL;			//Enable Pull up, down or no pull resister
    GPIO_InitStructure.Speed = GPIO_SPEED_MEDIUM;			//Pin latency
    GPIO_InitStructure.Alternate = GPIO_AF2_TIM3;	//Set alternate function to be timer 3
    HAL_GPIO_Init(BRD_D5_GPIO_PORT, &GPIO_InitStructure);	//Initialise Pin

   /* Configure Timer settings */
   TIM_Init5.Instance = TIM3;					//Enable Timer 3
   TIM_Init5.Init.Period = 10000;			//Set for 200ms (5Hz) period
   TIM_Init5.Init.Prescaler = PrescalerValue;	//Set presale value
   TIM_Init5.Init.ClockDivision = 0;			//Set clock division
   TIM_Init5.Init.RepetitionCounter = 0; 		// Set Reload Value
   TIM_Init5.Init.CounterMode = TIM_COUNTERMODE_UP;	//Set timer to count up.

   /* PWM Mode configuration for Channel 2 - set pulse width*/
   PWMConfig.OCMode       = TIM_OCMODE_PWM1;	//Set PWM MODE (1 or 2 - NOT CHANNEL)
   PWMConfig.Pulse        = 7500;		//1ms pulse width to 10ms
   PWMConfig.OCPolarity   = TIM_OCPOLARITY_HIGH;
   PWMConfig.OCNPolarity  = TIM_OCNPOLARITY_HIGH;
   PWMConfig.OCFastMode   = TIM_OCFAST_DISABLE;
   PWMConfig.OCIdleState  = TIM_OCIDLESTATE_RESET;
   PWMConfig.OCNIdleState = TIM_OCNIDLESTATE_RESET;

   /* Enable PWM for Timer 3, channel 2 */
   HAL_TIM_PWM_Init(&TIM_Init5);
   HAL_TIM_PWM_ConfigChannel(&TIM_Init5, &PWMConfig, TIM_CHANNEL_1);

   /* Start PWM */
   HAL_TIM_PWM_Start(&TIM_Init5, TIM_CHANNEL_1);

   GPIO_InitStructure.Pin = BRD_D6_PIN;				//Pin
   GPIO_InitStructure.Mode = GPIO_MODE_AF_PP; 		//Set mode to be output alternate
   GPIO_InitStructure.Pull = GPIO_NOPULL;			//Enable Pull up, down or no pull resister
   GPIO_InitStructure.Speed = GPIO_SPEED_MEDIUM;			//Pin latency
   GPIO_InitStructure.Alternate = GPIO_AF1_TIM2;	//Set alternate function to be timer 3
   HAL_GPIO_Init(BRD_D6_GPIO_PORT, &GPIO_InitStructure);	//Initialise Pin

   /* Configure Timer settings */
   TIM_Init6.Instance = TIM2;					//Enable Timer 3
   TIM_Init6.Init.Period = 10000;			//Set for 200ms (5Hz) period
   TIM_Init6.Init.Prescaler = PrescalerValue;	//Set presale value
   TIM_Init6.Init.ClockDivision = 0;			//Set clock division
   TIM_Init6.Init.RepetitionCounter = 0; 		// Set Reload Value
   TIM_Init6.Init.CounterMode = TIM_COUNTERMODE_UP;	//Set timer to count up.

   /* PWM Mode configuration for Channel 2 - set pulse width*/
   PWMConfig.OCMode       = TIM_OCMODE_PWM1;	//Set PWM MODE (1 or 2 - NOT CHANNEL)
   PWMConfig.Pulse        = 7500;		//1ms pulse width to 10ms
   PWMConfig.OCPolarity   = TIM_OCPOLARITY_HIGH;
   PWMConfig.OCNPolarity  = TIM_OCNPOLARITY_HIGH;
   PWMConfig.OCFastMode   = TIM_OCFAST_DISABLE;
   PWMConfig.OCIdleState  = TIM_OCIDLESTATE_RESET;
   PWMConfig.OCNIdleState = TIM_OCNIDLESTATE_RESET;

   /* Enable PWM for Timer 3, channel 2 */
   HAL_TIM_PWM_Init(&TIM_Init6);
   HAL_TIM_PWM_ConfigChannel(&TIM_Init6, &PWMConfig, TIM_CHANNEL_3);

   /* Start PWM */
   HAL_TIM_PWM_Start(&TIM_Init6, TIM_CHANNEL_3);

}

开发者ID:timmyhadwen，项目名称:UQRoboticsTank，代码行数:94，代码来源:tracks.c

示例11: main

/**
  * @brief  Main program
  * @param  None
  * @retval None
  */
int main(void)
{
  /* STM32F4xx HAL library initialization:
       - Configure the Flash prefetch, instruction and Data caches
       - Configure the Systick to generate an interrupt each 1 msec
       - Set NVIC Group Priority to 4
       - Global MSP (MCU Support Package) initialization
     */
  HAL_Init();
  
  /* Configure the system clock to 168 MHz */
  SystemClock_Config();
  
  /* Configure LED3 */
  BSP_LED_Init(LED3);  

  /*##-1- Configure the TIM peripheral #######################################*/ 
  /* -----------------------------------------------------------------------
    TIM1 Configuration: generate 1 PWM signal using the DMA burst mode:
  
    TIM1 input clock (TIM1CLK) is set to 2 * APB2 clock (PCLK2), 
    since APB2 prescaler is different from 1.   
      TIM1CLK = 2 * PCLK2  
      PCLK2 = HCLK / 2 
      => TIM1CLK = 2 * (HCLK / 2) = HCLK = SystemCoreClock
    
    To get TIM1 counter clock at 24 MHz, the prescaler is computed as follows:
      Prescaler = (TIM1CLK / TIM1 counter clock) - 1
      Prescaler = (SystemCoreClock /24 MHz) - 1
  
    The TIM1 period is 5.8 KHz: TIM1 Frequency = TIM1 counter clock/(ARR + 1)
                                               = 24 MHz / 4096 = 5.85 KHz
    TIM1 Channel1 duty cycle = (TIM1_CCR1/ TIM1_ARR)* 100 = 33.33%
  
    Note: 
     SystemCoreClock variable holds HCLK frequency and is defined in system_stm32f4xx.c file.
     Each time the core clock (HCLK) changes, user had to update SystemCoreClock 
     variable value. Otherwise, any configuration based on this variable will be incorrect.
     This variable is updated in three ways:
      1) by calling CMSIS function SystemCoreClockUpdate()
      2) by calling HAL API function HAL_RCC_GetSysClockFreq()
      3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency  
  ----------------------------------------------------------------------- */
  
  TimHandle.Instance = TIMx;
  
  TimHandle.Init.Period            = 0xFFFF;
  TimHandle.Init.RepetitionCounter = 0;
  TimHandle.Init.Prescaler         = (uint16_t) ((SystemCoreClock / 24000000) - 1);
  TimHandle.Init.ClockDivision     = 0;
  TimHandle.Init.CounterMode       = TIM_COUNTERMODE_UP;
  if(HAL_TIM_PWM_Init(&TimHandle) != HAL_OK)
  {
    /* Initialization Error */
    Error_Handler();
  }
  
  /*##-2- Configure the PWM channel 3 ########################################*/ 
  sConfig.OCMode     = TIM_OCMODE_PWM1;
  sConfig.OCPolarity = TIM_OCPOLARITY_HIGH;
  sConfig.Pulse      = 0xFFF;
  if(HAL_TIM_PWM_ConfigChannel(&TimHandle, &sConfig, TIM_CHANNEL_1) != HAL_OK)
  {
    /* Configuration Error */
    Error_Handler();
  }
  
  /*##-3- Start PWM signal generation in DMA mode ############################*/ 
  if(  HAL_TIM_PWM_Start(&TimHandle, TIM_CHANNEL_1) != HAL_OK)
  {
    /* Starting PWM generation Error */
    Error_Handler();
  }
  
  /*##-4- Start DMA Burst transfer ###########################################*/ 
  HAL_TIM_DMABurst_WriteStart(&TimHandle, TIM_DMABASE_ARR, TIM_DMA_UPDATE,
                              (uint32_t*)aSRC_Buffer, TIM_DMABURSTLENGTH_3TRANSFERS);
  
  /* Infinite loop */
  while (1)
  {
  }
}

开发者ID:eemei，项目名称:library-stm32f4，代码行数:88，代码来源:main.c

示例12: main

/**
  * @brief  Main program
  * @param  None
  * @retval None
  */
int main(void)
{
  /* STM32F2xx HAL library initialization:
       - Configure the Flash prefetch, instruction and Data caches
       - Configure the Systick to generate an interrupt each 1 msec
       - Set NVIC Group Priority to 4
       - Global MSP (MCU Support Package) initialization
     */
  HAL_Init();

  /* Configure the system clock to 120 MHz */
  SystemClock_Config();

  /* Configure LED3 */
  BSP_LED_Init(LED3);
  
  /* Timers Configuration */
  /* ---------------------------------------------------------------------------
    TIM1 and Timers(TIM3 and TIM4) synchronisation in parallel mode.
     1/TIM1 is configured as Master Timer:
         - PWM Mode is used
         - The TIM1 Update event is used as Trigger Output
    
     2/TIM3 and TIM4 are slaves for TIM1,
         - PWM Mode is used
         - The ITR0(TIM1) is used as input trigger for both slaves
         - Gated mode is used, so starts and stops of slaves counters
           are controlled by the Master trigger output signal(update event).
    
    In this example TIM1 input clock (TIM1CLK) is set to 2 * APB2 clock (PCLK2), 
    since APB2 prescaler is different from 1.   
      TIM1CLK = 2 * PCLK2  
      PCLK2 = HCLK / 2 
      => TIM1CLK = HCLK = SystemCoreClock
          
    The TIM1 counter clock is equal to SystemCoreClock = 120 MHz.
                                                               
    The Master Timer TIM1 is running at:
    TIM1 frequency = TIM1 counter clock / (TIM1_Period + 1) = 469 KHz
    TIM1_Period = (TIM1 counter clock / TIM1 frequency) - 1 = 255
    and the duty cycle is equal to: TIM1_CCR1/(TIM1_ARR + 1) = 50%

    The TIM3 is running at: 
    (TIM1 frequency)/ ((TIM3 period +1)* (Repetition_Counter+1)) = 31.25 KHz and
    a duty cycle equal to TIM3_CCR1/(TIM3_ARR + 1) = 33.3%

    The TIM4 is running at:
    (TIM1 frequency)/ ((TIM4 period +1)* (Repetition_Counter+1)) = 46.9 KHz and
    a duty cycle equal to TIM4_CCR1/(TIM4_ARR + 1) = 50%

    Note: 
     SystemCoreClock variable holds HCLK frequency and is defined in system_stm32f2xx.c file.
     Each time the core clock (HCLK) changes, user had to update SystemCoreClock 
     variable value. Otherwise, any configuration based on this variable will be incorrect.
     This variable is updated in three ways:
      1) by calling CMSIS function SystemCoreClockUpdate()
      2) by calling HAL API function HAL_RCC_GetSysClockFreq()
      3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency    
  --------------------------------------------------------------------------- */ 
  
  /* Set Timers instance */
  TimMasterHandle.Instance = TIM1;
  TimSlave1Handle.Instance = TIM3;
  TimSlave2Handle.Instance = TIM4;
 
  /*====================== Master configuration : TIM1 =======================*/
  /* Initialize TIM1 peripheral in PWM mode*/
  TimMasterHandle.Init.Period            = 255;
  TimMasterHandle.Init.Prescaler         = 0;
  TimMasterHandle.Init.ClockDivision     = 0;
  TimMasterHandle.Init.CounterMode       = TIM_COUNTERMODE_UP;
  TimMasterHandle.Init.RepetitionCounter = 4;
  if(HAL_TIM_PWM_Init(&TimMasterHandle) != HAL_OK)
  {
    /* Initialization Error */
    Error_Handler();
  }  
  
  /* Configure the PWM_channel_1  */
  sOCConfig.OCMode     = TIM_OCMODE_PWM1;
  sOCConfig.OCPolarity = TIM_OCPOLARITY_HIGH;
  sOCConfig.Pulse = 127;  
  if(HAL_TIM_PWM_ConfigChannel(&TimMasterHandle, &sOCConfig, TIM_CHANNEL_1) != HAL_OK)
  {
    /* Configuration Error */
    Error_Handler();
  }

  /* Configure TIM1 as master & use the update event as Trigger Output (TRGO) */
  sMasterConfig.MasterOutputTrigger = TIM_TRGO_UPDATE;
  sMasterConfig.MasterSlaveMode     = TIM_MASTERSLAVEMODE_ENABLE;
  if( HAL_TIMEx_MasterConfigSynchronization(&TimMasterHandle,&sMasterConfig) != HAL_OK)
  {
    /* Configuration Error */
    Error_Handler();
//.........这里部分代码省略.........

开发者ID:PaxInstruments，项目名称:STM32CubeF2，代码行数:101，代码来源:main.c

示例13: TIM_Config

/**
  * @brief  TIM3, TIM4, TIM8 configuration
  * @param  None
  * @retval None
  */
static void TIM_Config(void) {
	TIM_MasterConfigTypeDef sMasterConfig;
	
	/*########## TIM3 peripheral - PING (1 Hz) ##########*/
	TimHandle3.Instance = TIM3;
	TimHandle3.Init.Period = 10000;
	TimHandle3.Init.Prescaler = (uint32_t)(((SystemCoreClock / 2) / 10000) - 1); //10kHz
	// T = 1/f = 1/10k = 0,0001 ; time = Period * T = 1s
	TimHandle3.Init.ClockDivision = 0;
	TimHandle3.Init.CounterMode = TIM_COUNTERMODE_UP;
	if(HAL_TIM_OC_Init(&TimHandle3) != HAL_OK) {
		Error_Handler();
	}
	// Configure the Output Compare channel:
	sConfig.OCMode = TIM_OCMODE_TOGGLE;
	sConfig.Pulse = 100;
	sConfig.OCPolarity = TIM_OCPOLARITY_LOW;
	if(HAL_TIM_OC_ConfigChannel(&TimHandle3, &sConfig, TIM_CHANNEL_1) != HAL_OK) {
		Error_Handler();
	}
	if(HAL_TIM_OC_Start_IT(&TimHandle3, TIM_CHANNEL_1) != HAL_OK) {
		Error_Handler();
	}
	
	/*########## TIM4 peripheral - UDP (10 Hz) ##########*/
	TimHandle4.Instance = TIM4;
	TimHandle4.Init.Period = 10000;
	TimHandle4.Init.Prescaler = (uint32_t)(((SystemCoreClock / 2) / 100000) - 1); //100kHz
	// T = 1/f = 1/100k = 0,00001 ; time = Period * T = 0,1s
	TimHandle4.Init.ClockDivision = 0;
	TimHandle4.Init.CounterMode = TIM_COUNTERMODE_UP;
	if(HAL_TIM_OC_Init(&TimHandle4) != HAL_OK) {
		Error_Handler();
	}
	if(HAL_TIM_OC_ConfigChannel(&TimHandle4, &sConfig, TIM_CHANNEL_2) != HAL_OK) {
		Error_Handler();
	}
	if(HAL_TIM_OC_Start_IT(&TimHandle4, TIM_CHANNEL_2) != HAL_OK) {
		Error_Handler();
	}
	
	/*########## TIM8 peripheral - ADC ##########*/
	TimHandle8.Instance = TIM8;
	TimHandle8.Init.Period = 0x3C;
	TimHandle8.Init.Prescaler = 0;
	TimHandle8.Init.ClockDivision = 0;
	TimHandle8.Init.CounterMode = TIM_COUNTERMODE_UP;
	TimHandle8.Init.RepetitionCounter = 0x0;
	if(HAL_TIM_Base_Init(&TimHandle8) != HAL_OK) {
		Error_Handler();
	}
	// TIM8 TRGO selection:
	sMasterConfig.MasterOutputTrigger = TIM_TRGO_UPDATE;
	sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;
	if(HAL_TIMEx_MasterConfigSynchronization(&TimHandle8, &sMasterConfig) != HAL_OK) {
		Error_Handler(); //TIM8 TRGO selection Error
	}
	if(HAL_TIM_Base_Start(&TimHandle8) != HAL_OK) {
		Error_Handler(); //Counter Enable Error
	}
	
	/*########## TIM1 peripheral - PWM ##########*/
	TimHandle1.Instance = TIM1;
	TimHandle1.Init.Period = uhTimerPeriod;
	TimHandle1.Init.RepetitionCounter = 3;
	TimHandle1.Init.Prescaler = 0;
	TimHandle1.Init.ClockDivision = 0;
	TimHandle1.Init.CounterMode = TIM_COUNTERMODE_UP;
	if(HAL_TIM_PWM_Init(&TimHandle1) != HAL_OK) {
		Error_Handler();
	}
	// Configure the PWM channel 3:
	sConfig.OCMode = TIM_OCMODE_PWM1;
	sConfig.OCPolarity = TIM_OCPOLARITY_HIGH;
	sConfig.Pulse = aCCValue_Buffer;
	if(HAL_TIM_PWM_ConfigChannel(&TimHandle1, &sConfig, TIM_CHANNEL_3) != HAL_OK) {
		Error_Handler();
	}
	// Start PWM signal generation in DMA mode:
	if(HAL_TIM_PWM_Start_DMA(&TimHandle1, TIM_CHANNEL_3, &aCCValue_Buffer, 1) != HAL_OK) {
		Error_Handler();
	}
}

开发者ID:mrtnzlml-archive，项目名称:Real-time-WS，代码行数:88，代码来源:main.c

示例14: ws2811LedStripHardwareInit

void ws2811LedStripHardwareInit(void)
{
    TimHandle.Instance = WS2811_TIMER;

    TimHandle.Init.Prescaler = 1;
    TimHandle.Init.Period = 135; // 800kHz
    TimHandle.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
    TimHandle.Init.CounterMode = TIM_COUNTERMODE_UP;
    if(HAL_TIM_PWM_Init(&TimHandle) != HAL_OK)
    {
        /* Initialization Error */
        return;
    }

    static DMA_HandleTypeDef  hdma_tim;

    ws2811IO = IOGetByTag(IO_TAG(WS2811_PIN));
    /* GPIOA Configuration: TIM5 Channel 1 as alternate function push-pull */
    IOInit(ws2811IO, OWNER_LED_STRIP, RESOURCE_OUTPUT, 0);
    IOConfigGPIOAF(ws2811IO, IO_CONFIG(GPIO_MODE_AF_PP, GPIO_SPEED_FREQ_VERY_HIGH, GPIO_PULLUP), WS2811_TIMER_GPIO_AF);

    __DMA1_CLK_ENABLE();

    
    /* Set the parameters to be configured */
    hdma_tim.Init.Channel  = WS2811_DMA_CHANNEL;
    hdma_tim.Init.Direction = DMA_MEMORY_TO_PERIPH;
    hdma_tim.Init.PeriphInc = DMA_PINC_DISABLE;
    hdma_tim.Init.MemInc = DMA_MINC_ENABLE;
    hdma_tim.Init.PeriphDataAlignment = DMA_PDATAALIGN_WORD ;
    hdma_tim.Init.MemDataAlignment = DMA_MDATAALIGN_WORD ;
    hdma_tim.Init.Mode = DMA_NORMAL;
    hdma_tim.Init.Priority = DMA_PRIORITY_HIGH;
    hdma_tim.Init.FIFOMode = DMA_FIFOMODE_DISABLE;
    hdma_tim.Init.FIFOThreshold = DMA_FIFO_THRESHOLD_FULL;
    hdma_tim.Init.MemBurst = DMA_MBURST_SINGLE;
    hdma_tim.Init.PeriphBurst = DMA_PBURST_SINGLE;

    /* Set hdma_tim instance */
    hdma_tim.Instance = WS2811_DMA_STREAM;

    uint32_t channelAddress = 0;
    switch (WS2811_TIMER_CHANNEL) {
        case TIM_CHANNEL_1:
            timDMASource = TIM_DMA_ID_CC1;
            channelAddress = (uint32_t)(&WS2811_TIMER->CCR1);
            break;
        case TIM_CHANNEL_2:
            timDMASource = TIM_DMA_ID_CC2;
            channelAddress = (uint32_t)(&WS2811_TIMER->CCR2);
            break;
        case TIM_CHANNEL_3:
            timDMASource = TIM_DMA_ID_CC3;
            channelAddress = (uint32_t)(&WS2811_TIMER->CCR3);
            break;
        case TIM_CHANNEL_4:
            timDMASource = TIM_DMA_ID_CC4;
            channelAddress = (uint32_t)(&WS2811_TIMER->CCR4);
            break;
    }

    /* Link hdma_tim to hdma[x] (channelx) */
    __HAL_LINKDMA(&TimHandle, hdma[timDMASource], hdma_tim);

    dmaSetHandler(WS2811_DMA_HANDLER_IDENTIFER, WS2811_DMA_IRQHandler, NVIC_PRIO_WS2811_DMA, timDMASource);

    /* Initialize TIMx DMA handle */
    if(HAL_DMA_Init(TimHandle.hdma[timDMASource]) != HAL_OK)
    {
        /* Initialization Error */
        return;
    }

    TIM_OC_InitTypeDef TIM_OCInitStructure;

    /* PWM1 Mode configuration: Channel1 */
    TIM_OCInitStructure.OCMode = TIM_OCMODE_PWM1;
    TIM_OCInitStructure.Pulse = 0;
    TIM_OCInitStructure.OCPolarity = TIM_OCPOLARITY_HIGH;
    TIM_OCInitStructure.OCIdleState = TIM_OCIDLESTATE_RESET;
    TIM_OCInitStructure.OCNIdleState  = TIM_OCNIDLESTATE_RESET;
    TIM_OCInitStructure.OCFastMode = TIM_OCFAST_DISABLE;

    if(HAL_TIM_PWM_ConfigChannel(&TimHandle, &TIM_OCInitStructure, WS2811_TIMER_CHANNEL) != HAL_OK)
    {
        /* Configuration Error */
        return;
    }

    const hsvColor_t hsv_white = {  0, 255, 255};
    ws2811Initialised = true;
    setStripColor(&hsv_white);
}

开发者ID:mmiers，项目名称:betaflight，代码行数:93，代码来源:light_ws2811strip_hal.c

示例15: main

/**
  * @brief  Main program
  * @param  None
  * @retval None
  */
int main(void)
{
  /* STM32F4xx HAL library initialization:
       - Configure the Flash prefetch, instruction and Data caches
       - Configure the Systick to generate an interrupt each 1 msec
       - Set NVIC Group Priority to 4
       - Global MSP (MCU Support Package) initialization
     */
  HAL_Init();
  
  /* Configure the system clock to 180 MHz */
  SystemClock_Config();

  /* Configure LED3 */
  BSP_LED_Init(LED3);

  /* Compute the Timer period to generate a signal frequency at 17.57 Khz */
  uwPeriod = (SystemCoreClock / 17570 ) - 1;
  
  /* Compute Pulse1 value to generate a duty cycle at 50% for channel 1 and 1N */
  uwPulse1 = (5 * (uwPeriod - 1)) / 10;
  /* Compute Pulse2 value to generate a duty cycle at 37.5%  for channel 2 and 2N */
  uwPulse2 = (375 * (uwPeriod - 1)) / 1000;
  /* Compute Pulse3 value to generate a duty cycle at 25%  for channel 3 and 3N */
  uwPulse3 = (25 * (uwPeriod - 1)) / 100;
  /* Compute Pulse4 value to generate a duty cycle at 12.5%  for channel 4 */
  uwPulse4 = (125 * (uwPeriod- 1)) / 1000;
  
  /*##-1- Configure the TIM peripheral #######################################*/ 
  /* Initialize TIMx peripheral as follow:
       + Prescaler = 0
       + Period = uwPeriod  (to have an output frequency equal to 17.57 KHz)
       + ClockDivision = 0
       + Counter direction = Up
  */
  TimHandle.Instance = TIM1;
  
  TimHandle.Init.Period            = uwPeriod;
  TimHandle.Init.Prescaler         = 0;
  TimHandle.Init.ClockDivision     = 0;
  TimHandle.Init.CounterMode       = TIM_COUNTERMODE_UP;
  TimHandle.Init.RepetitionCounter = 0; 
  
  if(HAL_TIM_PWM_Init(&TimHandle) != HAL_OK)
  {
    /* Initialization Error */
    Error_Handler();
  }
  
  /*##-2- Configure the PWM channels #########################################*/ 
  /* Common configuration for all channels */
  sConfig.OCMode      = TIM_OCMODE_PWM2;
  sConfig.OCFastMode  = TIM_OCFAST_DISABLE;
  sConfig.OCPolarity  = TIM_OCPOLARITY_LOW;
  sConfig.OCNPolarity = TIM_OCNPOLARITY_HIGH;
  sConfig.OCIdleState = TIM_OCIDLESTATE_SET;
  sConfig.OCNIdleState= TIM_OCNIDLESTATE_RESET;

  /* Set the pulse value for channel 1 */
  sConfig.Pulse = uwPulse1;  
  if(HAL_TIM_PWM_ConfigChannel(&TimHandle, &sConfig, TIM_CHANNEL_1) != HAL_OK)
  {
    /* Configuration Error */
    Error_Handler();
  }
  
  /* Set the pulse value for channel 2 */
  sConfig.Pulse = uwPulse2;
  if(HAL_TIM_PWM_ConfigChannel(&TimHandle, &sConfig, TIM_CHANNEL_2) != HAL_OK)
  {
    /* Configuration Error */
    Error_Handler();
  }
  
  /* Set the pulse value for channel 3 */
  sConfig.Pulse = uwPulse3;
  if(HAL_TIM_PWM_ConfigChannel(&TimHandle, &sConfig, TIM_CHANNEL_3) != HAL_OK)
  {
    /* Configuration Error */
    Error_Handler();
  }
  
  /* Set the pulse value for channel 4 */
  sConfig.Pulse = uwPulse4;
  if(HAL_TIM_PWM_ConfigChannel(&TimHandle, &sConfig, TIM_CHANNEL_4) != HAL_OK)
  {
    /* Configuration Error */
    Error_Handler();
  }
  
  /*##-3- Start PWM signals generation #######################################*/ 
  /* Start channel 1 */
  if(HAL_TIM_PWM_Start(&TimHandle, TIM_CHANNEL_1) != HAL_OK)
  {
    /* Starting Error */
//.........这里部分代码省略.........

开发者ID:451506709，项目名称:automated_machine，代码行数:101，代码来源:main.c

示例16: main

/**
  * @brief  Main program.
  * @param  None
  * @retval None
  */
int main(void)
{
  /* Enable the CPU Cache */
  CPU_CACHE_Enable();
  
  /* STM32F7xx HAL library initialization:
       - Configure the Flash ART accelerator on ITCM interface
       - Systick timer is configured by default as source of time base, but user 
         can eventually implement his proper time base source (a general purpose 
         timer for example or other time source), keeping in mind that Time base 
         duration should be kept 1ms since PPP_TIMEOUT_VALUEs are defined and 
         handled in milliseconds basis.
       - Set NVIC Group Priority to 4
       - Low Level Initialization
     */
  HAL_Init();

  /* Configure the system clock to 216 MHz */
  SystemClock_Config();

  /* Configure LED3 */
  BSP_LED_Init(LED3);

/*##-1- Configure the TIM peripheral #######################################*/ 
  /* -----------------------------------------------------------------------
    TIM2 Configuration: generate 1 PWM signal using the DMA burst mode:
   
    TIM2 input clock (TIM2CLK) is set to APB1 clock (PCLK1)x2, since APB1
    prescaler is 4.
    TIM1CLK = PCLK1/2
    PCLK1 = HCLK/4
    => TIM1CLK = HCLK/2 = SystemCoreClock/2
    
    To get TIM2 counter clock at 20 MHz, the prescaler is computed as follows:
      Prescaler = (TIM2CLK / TIM2 counter clock) - 1
      Prescaler = ((SystemCoreClock/2) /20 MHz) - 1
  
    The TIM2 Frequency = TIM2 counter clock/(ARR + 1)
                       = 20 MHz / 4096 = 4.88 KHz
    TIM2 Channel1 duty cycle = (TIM2_CCR1/ TIM2_ARR)* 100 = 33.33%
  
    Note: 
     SystemCoreClock variable holds HCLK frequency and is defined in stm32f7xxxx.c file.
     Each time the core clock (HCLK) changes, user had to update SystemCoreClock 
     variable value. Otherwise, any configuration based on this variable will be incorrect.
     This variable is updated in three ways:
      1) by calling CMSIS function SystemCoreClockUpdate()
      2) by calling HAL API function HAL_RCC_GetSysClockFreq()
      3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency  
  ----------------------------------------------------------------------- */
  
  TimHandle.Instance = TIM2;
  
  TimHandle.Init.Period            = 0xFFFF;
  TimHandle.Init.Prescaler         = ((SystemCoreClock/2) / (20 * 1000000)) - 1;
  TimHandle.Init.ClockDivision     = 0;
  TimHandle.Init.CounterMode       = TIM_COUNTERMODE_UP;
  if(HAL_TIM_PWM_Init(&TimHandle) != HAL_OK)
  {
    /* Initialization Error */
    Error_Handler();
  }
  
  /*##-2- Configure the PWM channel 1 ########################################*/ 
  sConfig.OCMode     = TIM_OCMODE_PWM1;
  sConfig.OCPolarity = TIM_OCPOLARITY_HIGH;
  sConfig.Pulse      = 0xFFF;
  if(HAL_TIM_PWM_ConfigChannel(&TimHandle, &sConfig, TIM_CHANNEL_1) != HAL_OK)
  {
    /* Configuration Error */
    Error_Handler();
  }
  
  /*##-3- Start PWM signal generation in DMA mode ############################*/ 
  if(  HAL_TIM_PWM_Start(&TimHandle, TIM_CHANNEL_1) != HAL_OK)
  {
    /* Starting PWM generation Error */
    Error_Handler();
  }
  
  /*##-4- Start DMA Burst transfer ###########################################*/ 
  HAL_TIM_DMABurst_WriteStart(&TimHandle, TIM_DMABASE_ARR, TIM_DMA_UPDATE,
                              (uint32_t*)aSRC_Buffer, TIM_DMABURSTLENGTH_3TRANSFERS);
  
  /* Infinite loop */
  while (1)
  {
  }


}

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ HAL_TIM_PWM_Start函数代码示例发布时间：2022-05-30

C++ HAL_TIM_PWM_ConfigChannel函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19212|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9994|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8331|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8699|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8642|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9663|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8627|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：8003|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8660|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7537|2022-11-06

客服电话

电子邮件

C++ HAL_TIM_PWM_Init函数代码示例

示例1: main

示例2: SC_TIM4_Init

示例3: MX_TIM2_Init

示例4: MX_TIM4_Init

示例5: pwmout_period_us

示例6: Time3Enable

示例7: main

示例8: ultrasound

示例9: uartTester

示例10: tracks_init

示例11: main

示例12: main

示例13: TIM_Config

示例14: ws2811LedStripHardwareInit

示例15: main

示例16: main

请发表评论

全部评论

上一篇：

下一篇：

相机标定过程(opencv) + matlab参数导入ope

ashchan/mail-notifr: Mail Notifr - Gmail

TwistedAsylumMC/bedrock-unicode-characte

uber/RIBs: Uber's cross-platform mob

ajtowf/ng2_play: Angular 2 Play with Mat

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053

客服电话

电子邮件

C++ HAL_TIM_PWM_Init函数代码示例

示例1: main

示例2: SC_TIM4_Init

示例3: MX_TIM2_Init

示例4: MX_TIM4_Init

示例5: pwmout_period_us

示例6: Time3Enable

示例7: main

示例8: ultrasound

示例9: uartTester

示例10: tracks_init

示例11: main

示例12: main

示例13: TIM_Config

示例14: ws2811LedStripHardwareInit

示例15: main

示例16: main

请发表评论

全部评论

上一篇：

下一篇：

相机标定过程(opencv) + matlab参数导入ope

ashchan/mail-notifr: Mail Notifr - Gmail

TwistedAsylumMC/bedrock-unicode-characte

uber/RIBs: Uber&#39;s cross-platform mob

ajtowf/ng2_play: Angular 2 Play with Mat

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053

uber/RIBs: Uber's cross-platform mob