C++ GXV_NAME_ENTER函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中GXV_NAME_ENTER函数的典型用法代码示例。如果您正苦于以下问题：C++ GXV_NAME_ENTER函数的具体用法？C++ GXV_NAME_ENTER怎么用？C++ GXV_NAME_ENTER使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了GXV_NAME_ENTER函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: gxv_lcar_LookupValue_validate

  static void
  gxv_lcar_LookupValue_validate( FT_UShort            glyph,
                                 GXV_LookupValueDesc  value,
                                 GXV_Validator        valid )
  {
    FT_Bytes   p     = valid->root->base + value.u;
    FT_Bytes   limit = valid->root->limit;
    FT_UShort  count;
    FT_Short   partial;
    FT_UShort  i;


    GXV_NAME_ENTER( "element in lookupTable" );

    GXV_LIMIT_CHECK( 2 );
    count = FT_NEXT_USHORT( p );

    GXV_LIMIT_CHECK( 2 * count );
    for ( i = 0; i < count; i++ )
    {
      partial = FT_NEXT_SHORT( p );
      gxv_lcar_partial_validate( partial, glyph, valid );
    }

    GXV_EXIT;
  }

开发者ID:Ali-il，项目名称:gamekit，代码行数:26，代码来源:gxvlcar.c

示例2: gxv_mort_subtable_type1_substTable_validate

static void
gxv_mort_subtable_type1_substTable_validate( FT_Bytes       table,
        FT_Bytes       limit,
        GXV_Validator  valid )
{
    FT_Bytes   p = table;
    FT_UShort  num_gids = (FT_UShort)(
                              ((GXV_mort_subtable_type1_StateOptRec *)
                               (valid->statetable.optdata))->substitutionTable_length / 2 );
    FT_UShort  i;


    GXV_NAME_ENTER( "validating contents of substitutionTable" );
    for ( i = 0; i < num_gids ; i ++ )
    {
        FT_UShort  dst_gid;


        GXV_LIMIT_CHECK( 2 );
        dst_gid = FT_NEXT_USHORT( p );

        if ( dst_gid >= 0xFFFFU )
            continue;

        if ( dst_gid < valid->min_gid || valid->max_gid < dst_gid )
        {
            GXV_TRACE(( "substTable include a strange gid[%d]=%d >"
                        " out of define range (%d..%d)\n",
                        i, dst_gid, valid->min_gid, valid->max_gid ));
            GXV_SET_ERR_IF_PARANOID( FT_INVALID_GLYPH_ID );
        }
    }

    GXV_EXIT;
}

开发者ID:keizi，项目名称:PlaygroundOSS，代码行数:35，代码来源:gxvmort1.c

示例3: gxv_mort_featurearray_validate

  gxv_mort_featurearray_validate( FT_Bytes       table,
                                  FT_Bytes       limit,
                                  FT_ULong       nFeatureFlags,
                                  GXV_Validator  valid )
  {
    FT_Bytes  p = table;
    FT_ULong  i;

    GXV_mort_featureRec  f = GXV_MORT_FEATURE_OFF;


    GXV_NAME_ENTER( "mort feature list" );
    for ( i = 0; i < nFeatureFlags; i++ )
    {
      GXV_LIMIT_CHECK( 2 + 2 + 4 + 4 );
      f.featureType    = FT_NEXT_USHORT( p );
      f.featureSetting = FT_NEXT_USHORT( p );
      f.enableFlags    = FT_NEXT_ULONG( p );
      f.disableFlags   = FT_NEXT_ULONG( p );

      gxv_mort_feature_validate( &f, valid );
    }

    if ( !IS_GXV_MORT_FEATURE_OFF( f ) )
      FT_INVALID_DATA;

    valid->subtable_length = p - table;
    GXV_EXIT;
  }

开发者ID:03050903，项目名称:Urho3D，代码行数:29，代码来源:gxvmort.c

示例4: gxv_just_justClassTable_validate

  static void
  gxv_just_justClassTable_validate ( FT_Bytes       table,
                                     FT_Bytes       limit,
                                     GXV_Validator  valid )
  {
    FT_Bytes   p = table;
    FT_UShort  length;
    FT_UShort  coverage;
    FT_ULong   subFeatureFlags;


    GXV_NAME_ENTER( "just justClassTable" );

    GXV_LIMIT_CHECK( 2 + 2 + 4 );
    length          = FT_NEXT_USHORT( p );
    coverage        = FT_NEXT_USHORT( p );
    subFeatureFlags = FT_NEXT_ULONG( p );

    GXV_TRACE(( "  justClassTable: coverage = 0x%04x (%s)",
                coverage,
                ( 0x4000 & coverage ) == 0 ? "ascending" : "descending" ));

    valid->statetable.optdata               = NULL;
    valid->statetable.optdata_load_func     = NULL;
    valid->statetable.subtable_setup_func   = NULL;
    valid->statetable.entry_glyphoffset_fmt = GXV_GLYPHOFFSET_NONE;
    valid->statetable.entry_validate_func   =
      gxv_just_classTable_entry_validate;

    gxv_StateTable_validate( p, table + length, valid );

    /* subtable_length is set by gxv_LookupTable_validate() */

    GXV_EXIT;
  }

开发者ID:4nakin，项目名称:Aquaria_clean，代码行数:35，代码来源:gxvjust.c

示例5: gxv_kern_subtable_fmt0_validate

  static void
  gxv_kern_subtable_fmt0_validate( FT_Bytes       table,
                                   FT_Bytes       limit,
                                   GXV_Validator  gxvalid )
  {
    FT_Bytes   p = table + GXV_KERN_SUBTABLE_HEADER_SIZE;

    FT_UShort  nPairs;
    FT_UShort  unitSize;


    GXV_NAME_ENTER( "kern subtable format 0" );

    unitSize = 2 + 2 + 2;
    nPairs   = 0;

    /* nPairs, searchRange, entrySelector, rangeShift */
    GXV_LIMIT_CHECK( 2 + 2 + 2 + 2 );
    gxv_BinSrchHeader_validate( p, limit, &unitSize, &nPairs, gxvalid );
    p += 2 + 2 + 2 + 2;

    gxv_kern_subtable_fmt0_pairs_validate( p, limit, nPairs, gxvalid );

    GXV_EXIT;
  }

开发者ID:hsmith，项目名称:freetype，代码行数:25，代码来源:gxvkern.c

示例6: gxv_kern_subtable_fmt2_clstbl_validate

  static void
  gxv_kern_subtable_fmt2_clstbl_validate( FT_Bytes            table,
                                          FT_Bytes            limit,
                                          GXV_kern_ClassSpec  spec,
                                          GXV_Validator       gxvalid )
  {
    const FT_String*  tag    = GXV_KERN_FMT2_DATA( class_tag[spec] );
    GXV_odtect_Range  odtect = GXV_KERN_FMT2_DATA( odtect );

    FT_Bytes   p = table;
    FT_UShort  firstGlyph;
    FT_UShort  nGlyphs;


    GXV_NAME_ENTER( "kern format 2 classTable" );

    GXV_LIMIT_CHECK( 2 + 2 );
    firstGlyph = FT_NEXT_USHORT( p );
    nGlyphs    = FT_NEXT_USHORT( p );
    GXV_TRACE(( " %s firstGlyph=%d, nGlyphs=%d\n",
                tag, firstGlyph, nGlyphs ));

    gxv_glyphid_validate( firstGlyph, gxvalid );
    gxv_glyphid_validate( (FT_UShort)( firstGlyph + nGlyphs - 1 ), gxvalid );

    gxv_array_getlimits_ushort( p, p + ( 2 * nGlyphs ),
                                &( GXV_KERN_FMT2_DATA( offset_min[spec] ) ),
                                &( GXV_KERN_FMT2_DATA( offset_max[spec] ) ),
                                gxvalid );

    gxv_odtect_add_range( table, 2 * nGlyphs, tag, odtect );

    GXV_EXIT;
  }

开发者ID:hsmith，项目名称:freetype，代码行数:34，代码来源:gxvkern.c

示例7: gxv_mort_subtable_type2_validate

  gxv_mort_subtable_type2_validate(FT_Bytes       table,
                                    FT_Bytes       limit,
                                    GXV_Validator  gxvalid)
  {
    FT_Bytes  p = table;

    GXV_mort_subtable_type2_StateOptRec  lig_rec;


    GXV_NAME_ENTER("mort chain subtable type2 (Ligature Substitution)");

    GXV_LIMIT_CHECK(GXV_MORT_SUBTABLE_TYPE2_HEADER_SIZE);

    gxvalid->statetable.optdata =
      &lig_rec;
    gxvalid->statetable.optdata_load_func =
      gxv_mort_subtable_type2_opttable_load;
    gxvalid->statetable.subtable_setup_func =
      gxv_mort_subtable_type2_subtable_setup;
    gxvalid->statetable.entry_glyphoffset_fmt =
      GXV_GLYPHOFFSET_NONE;
    gxvalid->statetable.entry_validate_func =
      gxv_mort_subtable_type2_entry_validate;

    gxv_StateTable_validate(p, limit, gxvalid);

    p += gxvalid->subtable_length;
    gxv_mort_subtable_type2_ligatureTable_validate(table, gxvalid);

    gxvalid->subtable_length = (FT_ULong)(p - table);

    GXV_EXIT;
  }

开发者ID:ioid3-games，项目名称:ioid3-rtcw，代码行数:33，代码来源:gxvmort2.c

示例8: gxv_kern_subtable_fmt1_validate

  static void
  gxv_kern_subtable_fmt1_validate( FT_Bytes       table,
                                   FT_Bytes       limit,
                                   GXV_Validator  gxvalid )
  {
    FT_Bytes                   p = table;
    GXV_kern_fmt1_StateOptRec  vt_rec;


    GXV_NAME_ENTER( "kern subtable format 1" );

    gxvalid->statetable.optdata =
      &vt_rec;
    gxvalid->statetable.optdata_load_func =
      gxv_kern_subtable_fmt1_valueTable_load;
    gxvalid->statetable.subtable_setup_func =
      gxv_kern_subtable_fmt1_subtable_setup;
    gxvalid->statetable.entry_glyphoffset_fmt =
      GXV_GLYPHOFFSET_NONE;
    gxvalid->statetable.entry_validate_func =
      gxv_kern_subtable_fmt1_entry_validate;

    gxv_StateTable_validate( p, limit, gxvalid );

    GXV_EXIT;
  }

开发者ID:hsmith，项目名称:freetype，代码行数:26，代码来源:gxvkern.c

示例9: gxv_feat_setting_validate

  static void
  gxv_feat_setting_validate( FT_Bytes       table,
                             FT_Bytes       limit,
                             FT_Bool        exclusive,
                             GXV_Validator  gxvalid )
  {
    FT_Bytes   p = table;
    FT_UShort  setting;


    GXV_NAME_ENTER( "setting" );

    GXV_LIMIT_CHECK( 2 );

    setting = FT_NEXT_USHORT( p );

    /* If we have exclusive setting, the setting should be odd. */
    if ( exclusive && ( setting & 1 ) == 0 )
      FT_INVALID_DATA;

    gxv_feat_name_index_validate( p, limit, gxvalid );

    GXV_FEAT_DATA( setting ) = setting;

    GXV_EXIT;
  }

开发者ID:hsmith，项目名称:freetype，代码行数:26，代码来源:gxvfeat.c

示例10: gxv_mort_chain_validate

  static void
  gxv_mort_chain_validate( FT_Bytes       table,
                           FT_Bytes       limit,
                           GXV_Validator  valid )
  {
    FT_Bytes   p = table;
    FT_ULong   defaultFlags;
    FT_ULong   chainLength;
    FT_UShort  nFeatureFlags;
    FT_UShort  nSubtables;


    GXV_NAME_ENTER( "mort chain header" );

    GXV_LIMIT_CHECK( 4 + 4 + 2 + 2 );
    defaultFlags  = FT_NEXT_ULONG( p );
    chainLength   = FT_NEXT_ULONG( p );
    nFeatureFlags = FT_NEXT_USHORT( p );
    nSubtables    = FT_NEXT_USHORT( p );

    gxv_mort_featurearray_validate( p, table + chainLength,
                                    nFeatureFlags, valid );
    p += valid->subtable_length;
    gxv_mort_subtables_validate( p, table + chainLength, nSubtables, valid );
    valid->subtable_length = chainLength;

    GXV_EXIT;
  }

开发者ID:BlairArchibald，项目名称:Alexandria，代码行数:28，代码来源:gxvmort.c

示例11: gxv_mort_subtable_type2_ligatureTable_validate

  static void
  gxv_mort_subtable_type2_ligatureTable_validate(FT_Bytes       table,
                                                  GXV_Validator  gxvalid)
  {
    GXV_mort_subtable_type2_StateOptRecData  optdata =
      (GXV_mort_subtable_type2_StateOptRecData)gxvalid->statetable.optdata;

    FT_Bytes p     = table + optdata->ligatureTable;
    FT_Bytes limit = table + optdata->ligatureTable
                           + optdata->ligatureTable_length;


    GXV_NAME_ENTER("mort chain subtable type2 - substitutionTable");
    if (0 != optdata->ligatureTable)
    {
      /* Apple does not give specification of ligatureTable format */
      while (p < limit)
      {
        FT_UShort  lig_gid;


        GXV_LIMIT_CHECK(2);
        lig_gid = FT_NEXT_USHORT(p);

        if (gxvalid->face->num_glyphs < lig_gid)
          GXV_SET_ERR_IF_PARANOID(FT_INVALID_GLYPH_ID);
      }
    }
    GXV_EXIT;
  }

开发者ID:ioid3-games，项目名称:ioid3-rtcw，代码行数:30，代码来源:gxvmort2.c

示例12: gxv_morx_subtable_type1_validate

  gxv_morx_subtable_type1_validate( FT_Bytes       table,
                                    FT_Bytes       limit,
                                    GXV_Validator  valid )
  {
    FT_Bytes  p = table;

    GXV_morx_subtable_type1_StateOptRec  st_rec;


    GXV_NAME_ENTER( "morx chain subtable type1 (Contextual Glyph Subst)" );

    GXV_LIMIT_CHECK( GXV_MORX_SUBTABLE_TYPE1_HEADER_SIZE );

    st_rec.substitutionTable_num_lookupTables = 0;

    valid->xstatetable.optdata =
      &st_rec;
    valid->xstatetable.optdata_load_func =
      gxv_morx_subtable_type1_substitutionTable_load;
    valid->xstatetable.subtable_setup_func =
      gxv_morx_subtable_type1_subtable_setup;
    valid->xstatetable.entry_glyphoffset_fmt =
      GXV_GLYPHOFFSET_ULONG;
    valid->xstatetable.entry_validate_func =
      gxv_morx_subtable_type1_entry_validate;

    gxv_XStateTable_validate( p, limit, valid );

    gxv_morx_subtable_type1_substitutionTable_validate(
      table + st_rec.substitutionTable,
      table + st_rec.substitutionTable + st_rec.substitutionTable_length,
      valid );

    GXV_EXIT;
  }

开发者ID:0302zq，项目名称:libgdx，代码行数:35，代码来源:gxvmorx1.c

示例13: gxv_just_widthDeltaClusters_validate

  static void
  gxv_just_widthDeltaClusters_validate( FT_Bytes       table,
                                        FT_Bytes       limit,
                                        GXV_Validator  valid )
  {
    FT_Bytes  p         = table ;
    FT_Bytes  wdc_end   = table + GXV_JUST_DATA( wdc_offset_max );
    FT_UInt   i;


    GXV_NAME_ENTER( "just justDeltaClusters" );

    if ( limit <= wdc_end )
      FT_INVALID_OFFSET;

    for ( i = 0; p <= wdc_end; i++ )
    {
      gxv_just_wdc_entry_validate( p, limit, valid );
      p += valid->subtable_length;
    }

    valid->subtable_length = p - table;

    GXV_EXIT;
  }

开发者ID:4nakin，项目名称:Aquaria_clean，代码行数:25，代码来源:gxvjust.c

示例14: gxv_mort_subtable_type5_validate

  gxv_mort_subtable_type5_validate( FT_Bytes       table,
                                    FT_Bytes       limit,
                                    GXV_Validator  gxvalid )
  {
    FT_Bytes  p = table;

    GXV_mort_subtable_type5_StateOptRec      et_rec;
    GXV_mort_subtable_type5_StateOptRecData  et = &et_rec;


    GXV_NAME_ENTER( "mort chain subtable type5 (Glyph Insertion)" );

    GXV_LIMIT_CHECK( GXV_MORT_SUBTABLE_TYPE5_HEADER_SIZE );

    gxvalid->statetable.optdata =
      et;
    gxvalid->statetable.optdata_load_func =
      NULL;
    gxvalid->statetable.subtable_setup_func =
      gxv_mort_subtable_type5_subtable_setup;
    gxvalid->statetable.entry_glyphoffset_fmt =
      GXV_GLYPHOFFSET_ULONG;
    gxvalid->statetable.entry_validate_func =
      gxv_mort_subtable_type5_entry_validate;

    gxv_StateTable_validate( p, limit, gxvalid );

    GXV_EXIT;
  }

开发者ID:1vanK，项目名称:Urho3D，代码行数:29，代码来源:gxvmort5.c

示例15: gxv_morx_chain_validate

  static void
  gxv_morx_chain_validate( FT_Bytes       table,
                           FT_Bytes       limit,
                           GXV_Validator  valid )
  {
    FT_Bytes  p = table;
    FT_ULong  defaultFlags;
    FT_ULong  chainLength;
    FT_ULong  nFeatureFlags;
    FT_ULong  nSubtables;


    GXV_NAME_ENTER( "morx chain header" );

    GXV_LIMIT_CHECK( 4 + 4 + 4 + 4 );
    defaultFlags  = FT_NEXT_ULONG( p );
    chainLength   = FT_NEXT_ULONG( p );
    nFeatureFlags = FT_NEXT_ULONG( p );
    nSubtables    = FT_NEXT_ULONG( p );

    /* feature-array of morx is same with that of mort */
    gxv_mort_featurearray_validate( p, limit, nFeatureFlags, valid );
    p += valid->subtable_length;

    if ( nSubtables >= 0x10000L )
      FT_INVALID_DATA;

    gxv_morx_subtables_validate( p, table + chainLength,
                                 (FT_UShort)nSubtables, valid );

    valid->subtable_length = chainLength;

    GXV_EXIT;
  }

开发者ID:CarloMaker，项目名称:Urho3D，代码行数:34，代码来源:gxvmorx.c

示例16: gxv_mort_chain_validate

  static void
  gxv_mort_chain_validate( FT_Bytes       table,
                           FT_Bytes       limit,
                           GXV_Validator  valid )
  {
    FT_Bytes   p = table;
#ifdef GXV_LOAD_UNUSED_VARS
    FT_ULong   defaultFlags;
#endif
    FT_ULong   chainLength;
    FT_UShort  nFeatureFlags;
    FT_UShort  nSubtables;


    GXV_NAME_ENTER( "mort chain header" );

    GXV_LIMIT_CHECK( 4 + 4 + 2 + 2 );
#ifdef GXV_LOAD_UNUSED_VARS
    defaultFlags  = FT_NEXT_ULONG( p );
#else
    p += 4;
#endif
    chainLength   = FT_NEXT_ULONG( p );
    nFeatureFlags = FT_NEXT_USHORT( p );
    nSubtables    = FT_NEXT_USHORT( p );

    gxv_mort_featurearray_validate( p, table + chainLength,
                                    nFeatureFlags, valid );
    p += valid->subtable_length;
    gxv_mort_subtables_validate( p, table + chainLength, nSubtables, valid );
    valid->subtable_length = chainLength;

    /* TODO: validate defaultFlags */
    GXV_EXIT;
  }

开发者ID:03050903，项目名称:Urho3D，代码行数:35，代码来源:gxvmort.c

示例17: gxv_feat_registry_validate

  static void
  gxv_feat_registry_validate( FT_UShort      feature,
                              FT_UShort      nSettings,
                              FT_Bool        exclusive,
                              GXV_Validator  valid )
  {
    GXV_NAME_ENTER( "feature in registry" );

    GXV_TRACE(( " (feature = %u)\n", feature ));

    if ( feature >= gxv_feat_registry_length )
    {
      GXV_TRACE(( "feature number %d is out of range %d\n",
                  feature, gxv_feat_registry_length ));
      if ( valid->root->level == FT_VALIDATE_PARANOID )
        FT_INVALID_DATA;
      goto Exit;
    }

    if ( gxv_feat_registry[feature].existence == 0 )
    {
      GXV_TRACE(( "feature number %d is in defined range but doesn't exist\n",
                  feature ));
      if ( valid->root->level == FT_VALIDATE_PARANOID )
        FT_INVALID_DATA;
      goto Exit;
    }

    if ( gxv_feat_registry[feature].apple_reserved )
    {
      /* Don't use here. Apple is reserved. */
      GXV_TRACE(( "feature number %d is reserved by Apple\n", feature ));
      if ( valid->root->level >= FT_VALIDATE_TIGHT )
        FT_INVALID_DATA;
    }

    if ( nSettings != gxv_feat_registry[feature].nSettings )
    {
      GXV_TRACE(( "feature %d: nSettings %d != defined nSettings %d\n",
                  feature, nSettings,
                  gxv_feat_registry[feature].nSettings ));
      if ( valid->root->level >= FT_VALIDATE_TIGHT )
        FT_INVALID_DATA;
    }

    if ( exclusive != gxv_feat_registry[feature].exclusive )
    {
      GXV_TRACE(( "exclusive flag %d differs from predefined value\n",
                  exclusive ));
      if ( valid->root->level >= FT_VALIDATE_TIGHT )
        FT_INVALID_DATA;
    }

  Exit:
    GXV_EXIT;
  }

开发者ID:DanielOaks，项目名称:ponscripter-fork，代码行数:56，代码来源:gxvfeat.c

示例18: gxv_kern_subtable_fmt0_pairs_validate

  static void
  gxv_kern_subtable_fmt0_pairs_validate( FT_Bytes       table,
                                         FT_Bytes       limit,
                                         FT_UShort      nPairs,
                                         GXV_Validator  valid )
  {
    FT_Bytes   p = table;
    FT_UShort  i;

    FT_UShort  last_gid_left  = 0;
    FT_UShort  last_gid_right = 0;

    FT_UNUSED( limit );


    GXV_NAME_ENTER( "kern format 0 pairs" );

    for ( i = 0; i < nPairs; i++ )
    {
      FT_UShort  gid_left;
      FT_UShort  gid_right;
      FT_Short   kernValue;


      /* left */
      gid_left  = FT_NEXT_USHORT( p );
      gxv_glyphid_validate( gid_left, valid );

      /* right */
      gid_right = FT_NEXT_USHORT( p );
      gxv_glyphid_validate( gid_right, valid );

      /* Pairs of left and right GIDs must be unique and sorted. */
      GXV_TRACE(( "left gid = %u, right gid = %u\n", gid_left, gid_right ));
      if ( gid_left == last_gid_left )
      {
        if ( last_gid_right < gid_right )
          last_gid_right = gid_right;
        else
          FT_INVALID_DATA;
      }
      else if ( last_gid_left < gid_left )
      {
        last_gid_left  = gid_left;
        last_gid_right = gid_right;
      }
      else
        FT_INVALID_DATA;

      /* skip the kern value */
      kernValue = FT_NEXT_SHORT( p );
    }

    GXV_EXIT;
  }

开发者ID:CarloMaker，项目名称:Urho3D，代码行数:55，代码来源:gxvkern.c

示例19: gxv_trak_trackData_validate

  static void
  gxv_trak_trackData_validate( FT_Bytes       table,
                               FT_Bytes       limit,
                               GXV_Validator  gxvalid )
  {
    FT_Bytes   p = table;
    FT_UShort  nTracks;
    FT_UShort  nSizes;
    FT_ULong   sizeTableOffset;

    GXV_ODTECT( 4, odtect );


    GXV_ODTECT_INIT( odtect );
    GXV_NAME_ENTER( "trackData" );

    /* read the header of trackData */
    GXV_LIMIT_CHECK( 2 + 2 + 4 );
    nTracks         = FT_NEXT_USHORT( p );
    nSizes          = FT_NEXT_USHORT( p );
    sizeTableOffset = FT_NEXT_ULONG( p );

    gxv_odtect_add_range( table, (FT_ULong)( p - table ),
                          "trackData header", odtect );

    /* validate trackTable */
    gxv_trak_trackTable_validate( p, limit, nTracks, gxvalid );
    gxv_odtect_add_range( p, gxvalid->subtable_length,
                          "trackTable", odtect );

    /* sizeTable is array of FT_Fixed, don't check contents */
    p = gxvalid->root->base + sizeTableOffset;
    GXV_LIMIT_CHECK( nSizes * 4 );
    gxv_odtect_add_range( p, nSizes * 4, "sizeTable", odtect );

    /* validate trackValueOffet */
    p = gxvalid->root->base + GXV_TRAK_DATA( trackValueOffset_min );
    if ( limit - p < nTracks * nSizes * 2 )
      GXV_TRACE(( "too short trackValue array\n" ));

    p = gxvalid->root->base + GXV_TRAK_DATA( trackValueOffset_max );
    GXV_LIMIT_CHECK( nSizes * 2 );

    gxv_odtect_add_range( gxvalid->root->base
                            + GXV_TRAK_DATA( trackValueOffset_min ),
                          GXV_TRAK_DATA( trackValueOffset_max )
                            - GXV_TRAK_DATA( trackValueOffset_min )
                            + nSizes * 2,
                          "trackValue array", odtect );

    gxv_odtect_validate( odtect, gxvalid );

    GXV_EXIT;
  }

开发者ID:GWRon，项目名称:pub.mod-NG，代码行数:54，代码来源:gxvtrak.c

示例20: gxv_kern_subtable_fmt2_validate

  static void
  gxv_kern_subtable_fmt2_validate( FT_Bytes       table,
                                   FT_Bytes       limit,
                                   GXV_Validator  gxvalid )
  {
    GXV_ODTECT( 3, odtect );
    GXV_kern_subtable_fmt2_DataRec  fmt2_rec =
      { 0, 0, { 0, 0 }, { 0, 0 }, { "leftClass", "rightClass" }, NULL };

    FT_Bytes   p = table + GXV_KERN_SUBTABLE_HEADER_SIZE;
    FT_UShort  leftOffsetTable;
    FT_UShort  rightOffsetTable;


    GXV_NAME_ENTER( "kern subtable format 2" );

    GXV_ODTECT_INIT( odtect );
    fmt2_rec.odtect = odtect;
    GXV_KERN_DATA( subtable_data ) = &fmt2_rec;

    GXV_LIMIT_CHECK( 2 + 2 + 2 + 2 );
    GXV_KERN_FMT2_DATA( rowWidth ) = FT_NEXT_USHORT( p );
    leftOffsetTable                = FT_NEXT_USHORT( p );
    rightOffsetTable               = FT_NEXT_USHORT( p );
    GXV_KERN_FMT2_DATA( array )    = FT_NEXT_USHORT( p );

    GXV_TRACE(( "rowWidth = %d\n", GXV_KERN_FMT2_DATA( rowWidth ) ));


    GXV_LIMIT_CHECK( leftOffsetTable );
    GXV_LIMIT_CHECK( rightOffsetTable );
    GXV_LIMIT_CHECK( GXV_KERN_FMT2_DATA( array ) );

    gxv_kern_subtable_fmt2_clstbl_validate( table + leftOffsetTable, limit,
                                            GXV_KERN_CLS_L, gxvalid );

    gxv_kern_subtable_fmt2_clstbl_validate( table + rightOffsetTable, limit,
                                            GXV_KERN_CLS_R, gxvalid );

    if ( GXV_KERN_FMT2_DATA( offset_min[GXV_KERN_CLS_L] ) +
           GXV_KERN_FMT2_DATA( offset_min[GXV_KERN_CLS_R] )
         < GXV_KERN_FMT2_DATA( array )                      )
      FT_INVALID_OFFSET;

    gxv_odtect_add_range( table + GXV_KERN_FMT2_DATA( array ),
                          GXV_KERN_FMT2_DATA( offset_max[GXV_KERN_CLS_L] )
                            + GXV_KERN_FMT2_DATA( offset_max[GXV_KERN_CLS_R] )
                            - GXV_KERN_FMT2_DATA( array ),
                          "array", odtect );

    gxv_odtect_validate( odtect, gxvalid );

    GXV_EXIT;
  }

开发者ID:hsmith，项目名称:freetype，代码行数:54，代码来源:gxvkern.c

注：本文中的GXV_NAME_ENTER函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ GXV_TRACE函数代码示例发布时间：2022-05-30

C++ GXV_LIMIT_CHECK函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19189|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9988|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8326|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8696|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8639|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9657|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8624|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7998|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8656|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7535|2022-11-06

客服电话

电子邮件

C++ GXV_NAME_ENTER函数代码示例

示例1: gxv_lcar_LookupValue_validate

示例2: gxv_mort_subtable_type1_substTable_validate

示例3: gxv_mort_featurearray_validate

示例4: gxv_just_justClassTable_validate

示例5: gxv_kern_subtable_fmt0_validate

示例6: gxv_kern_subtable_fmt2_clstbl_validate

示例7: gxv_mort_subtable_type2_validate

示例8: gxv_kern_subtable_fmt1_validate

示例9: gxv_feat_setting_validate

示例10: gxv_mort_chain_validate

示例11: gxv_mort_subtable_type2_ligatureTable_validate

示例12: gxv_morx_subtable_type1_validate

示例13: gxv_just_widthDeltaClusters_validate

示例14: gxv_mort_subtable_type5_validate

示例15: gxv_morx_chain_validate

示例16: gxv_mort_chain_validate

示例17: gxv_feat_registry_validate

示例18: gxv_kern_subtable_fmt0_pairs_validate

示例19: gxv_trak_trackData_validate

示例20: gxv_kern_subtable_fmt2_validate

请发表评论

全部评论

上一篇：

下一篇：

CVE-2022-2115

dustinvtran/ml-videos: A collection of v

ravikumar001/maven

更的笔顺,体会更的笔画,理会更的部首

ceejbot/LOUDBOT: AUTOMATED SHOUTING FOR

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053