C++ GXV_LIMIT_CHECK函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中GXV_LIMIT_CHECK函数的典型用法代码示例。如果您正苦于以下问题：C++ GXV_LIMIT_CHECK函数的具体用法？C++ GXV_LIMIT_CHECK怎么用？C++ GXV_LIMIT_CHECK使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了GXV_LIMIT_CHECK函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: gxv_mort_subtable_type1_substTable_validate

static void
gxv_mort_subtable_type1_substTable_validate( FT_Bytes       table,
        FT_Bytes       limit,
        GXV_Validator  valid )
{
    FT_Bytes   p = table;
    FT_UShort  num_gids = (FT_UShort)(
                              ((GXV_mort_subtable_type1_StateOptRec *)
                               (valid->statetable.optdata))->substitutionTable_length / 2 );
    FT_UShort  i;


    GXV_NAME_ENTER( "validating contents of substitutionTable" );
    for ( i = 0; i < num_gids ; i ++ )
    {
        FT_UShort  dst_gid;


        GXV_LIMIT_CHECK( 2 );
        dst_gid = FT_NEXT_USHORT( p );

        if ( dst_gid >= 0xFFFFU )
            continue;

        if ( dst_gid < valid->min_gid || valid->max_gid < dst_gid )
        {
            GXV_TRACE(( "substTable include a strange gid[%d]=%d >"
                        " out of define range (%d..%d)\n",
                        i, dst_gid, valid->min_gid, valid->max_gid ));
            GXV_SET_ERR_IF_PARANOID( FT_INVALID_GLYPH_ID );
        }
    }

    GXV_EXIT;
}

开发者ID:keizi，项目名称:PlaygroundOSS，代码行数:35，代码来源:gxvmort1.c

示例2: gxv_morx_chain_validate

  static void
  gxv_morx_chain_validate( FT_Bytes       table,
                           FT_Bytes       limit,
                           GXV_Validator  valid )
  {
    FT_Bytes  p = table;
    FT_ULong  defaultFlags;
    FT_ULong  chainLength;
    FT_ULong  nFeatureFlags;
    FT_ULong  nSubtables;


    GXV_NAME_ENTER( "morx chain header" );

    GXV_LIMIT_CHECK( 4 + 4 + 4 + 4 );
    defaultFlags  = FT_NEXT_ULONG( p );
    chainLength   = FT_NEXT_ULONG( p );
    nFeatureFlags = FT_NEXT_ULONG( p );
    nSubtables    = FT_NEXT_ULONG( p );

    /* feature-array of morx is same with that of mort */
    gxv_mort_featurearray_validate( p, limit, nFeatureFlags, valid );
    p += valid->subtable_length;

    if ( nSubtables >= 0x10000L )
      FT_INVALID_DATA;

    gxv_morx_subtables_validate( p, table + chainLength,
                                 (FT_UShort)nSubtables, valid );

    valid->subtable_length = chainLength;

    GXV_EXIT;
  }

开发者ID:CarloMaker，项目名称:Urho3D，代码行数:34，代码来源:gxvmorx.c

示例3: gxv_morx_subtable_type2_ligatureTable_validate

  static void
  gxv_morx_subtable_type2_ligatureTable_validate( FT_Bytes       table,
                                                  GXV_Validator  gxvalid )
  {
    GXV_morx_subtable_type2_StateOptRecData  optdata =
      (GXV_morx_subtable_type2_StateOptRecData)gxvalid->xstatetable.optdata;

    FT_Bytes p     = table + optdata->ligatureTable;
    FT_Bytes limit = table + optdata->ligatureTable
                           + optdata->ligatureTable_length;


    GXV_NAME_ENTER( "morx chain subtable type2 - substitutionTable" );

    if ( 0 != optdata->ligatureTable )
    {
      /* Apple does not give specification of ligatureTable format */
      while ( p < limit )
      {
        FT_UShort  lig_gid;


        GXV_LIMIT_CHECK( 2 );
        lig_gid = FT_NEXT_USHORT( p );
        if ( lig_gid < gxvalid->face->num_glyphs )
          GXV_SET_ERR_IF_PARANOID( FT_INVALID_GLYPH_ID );
      }
    }

    GXV_EXIT;
  }

开发者ID:AaronNGray，项目名称:texlive-libs，代码行数:31，代码来源:gxvmorx2.c

示例4: gxv_morx_subtable_type1_validate

  gxv_morx_subtable_type1_validate( FT_Bytes       table,
                                    FT_Bytes       limit,
                                    GXV_Validator  valid )
  {
    FT_Bytes  p = table;

    GXV_morx_subtable_type1_StateOptRec  st_rec;


    GXV_NAME_ENTER( "morx chain subtable type1 (Contextual Glyph Subst)" );

    GXV_LIMIT_CHECK( GXV_MORX_SUBTABLE_TYPE1_HEADER_SIZE );

    st_rec.substitutionTable_num_lookupTables = 0;

    valid->xstatetable.optdata =
      &st_rec;
    valid->xstatetable.optdata_load_func =
      gxv_morx_subtable_type1_substitutionTable_load;
    valid->xstatetable.subtable_setup_func =
      gxv_morx_subtable_type1_subtable_setup;
    valid->xstatetable.entry_glyphoffset_fmt =
      GXV_GLYPHOFFSET_ULONG;
    valid->xstatetable.entry_validate_func =
      gxv_morx_subtable_type1_entry_validate;

    gxv_XStateTable_validate( p, limit, valid );

    gxv_morx_subtable_type1_substitutionTable_validate(
      table + st_rec.substitutionTable,
      table + st_rec.substitutionTable + st_rec.substitutionTable_length,
      valid );

    GXV_EXIT;
  }

开发者ID:0302zq，项目名称:libgdx，代码行数:35，代码来源:gxvmorx1.c

示例5: gxv_mort_subtable_type5_validate

  gxv_mort_subtable_type5_validate( FT_Bytes       table,
                                    FT_Bytes       limit,
                                    GXV_Validator  gxvalid )
  {
    FT_Bytes  p = table;

    GXV_mort_subtable_type5_StateOptRec      et_rec;
    GXV_mort_subtable_type5_StateOptRecData  et = &et_rec;


    GXV_NAME_ENTER( "mort chain subtable type5 (Glyph Insertion)" );

    GXV_LIMIT_CHECK( GXV_MORT_SUBTABLE_TYPE5_HEADER_SIZE );

    gxvalid->statetable.optdata =
      et;
    gxvalid->statetable.optdata_load_func =
      NULL;
    gxvalid->statetable.subtable_setup_func =
      gxv_mort_subtable_type5_subtable_setup;
    gxvalid->statetable.entry_glyphoffset_fmt =
      GXV_GLYPHOFFSET_ULONG;
    gxvalid->statetable.entry_validate_func =
      gxv_mort_subtable_type5_entry_validate;

    gxv_StateTable_validate( p, limit, gxvalid );

    GXV_EXIT;
  }

开发者ID:1vanK，项目名称:Urho3D，代码行数:29，代码来源:gxvmort5.c

示例6: gxv_feat_setting_validate

  static void
  gxv_feat_setting_validate( FT_Bytes       table,
                             FT_Bytes       limit,
                             FT_Bool        exclusive,
                             GXV_Validator  valid )
  {
    FT_Bytes   p = table;
    FT_UShort  setting;


    GXV_NAME_ENTER( "setting" );

    GXV_LIMIT_CHECK( 2 );

    setting = FT_NEXT_USHORT( p );

    /* If we have exclusive setting, the setting should be odd. */
    if ( exclusive && ( setting % 2 ) == 0 )
      FT_INVALID_DATA;

    gxv_feat_name_index_validate( p, limit, valid );

    GXV_FEAT_DATA( setting ) = setting;

    GXV_EXIT;
  }

开发者ID:cdaffara，项目名称:symbiandump-os2，代码行数:26，代码来源:gxvfeat.c

示例7: gxv_mort_featurearray_validate

  gxv_mort_featurearray_validate( FT_Bytes       table,
                                  FT_Bytes       limit,
                                  FT_ULong       nFeatureFlags,
                                  GXV_Validator  valid )
  {
    FT_Bytes  p = table;
    FT_ULong  i;

    GXV_mort_featureRec  f = GXV_MORT_FEATURE_OFF;


    GXV_NAME_ENTER( "mort feature list" );
    for ( i = 0; i < nFeatureFlags; i++ )
    {
      GXV_LIMIT_CHECK( 2 + 2 + 4 + 4 );
      f.featureType    = FT_NEXT_USHORT( p );
      f.featureSetting = FT_NEXT_USHORT( p );
      f.enableFlags    = FT_NEXT_ULONG( p );
      f.disableFlags   = FT_NEXT_ULONG( p );

      gxv_mort_feature_validate( &f, valid );
    }

    if ( !IS_GXV_MORT_FEATURE_OFF( f ) )
      FT_INVALID_DATA;

    valid->subtable_length = p - table;
    GXV_EXIT;
  }

开发者ID:CarloMaker，项目名称:Urho3D，代码行数:29，代码来源:gxvmort.c

示例8: gxv_mort_chain_validate

  static void
  gxv_mort_chain_validate( FT_Bytes       table,
                           FT_Bytes       limit,
                           GXV_Validator  gxvalid )
  {
    FT_Bytes   p = table;
#ifdef GXV_LOAD_UNUSED_VARS
    FT_ULong   defaultFlags;
#endif
    FT_ULong   chainLength;
    FT_UShort  nFeatureFlags;
    FT_UShort  nSubtables;


    GXV_NAME_ENTER( "mort chain header" );

    GXV_LIMIT_CHECK( 4 + 4 + 2 + 2 );
#ifdef GXV_LOAD_UNUSED_VARS
    defaultFlags  = FT_NEXT_ULONG( p );
#else
    p += 4;
#endif
    chainLength   = FT_NEXT_ULONG( p );
    nFeatureFlags = FT_NEXT_USHORT( p );
    nSubtables    = FT_NEXT_USHORT( p );

    gxv_mort_featurearray_validate( p, table + chainLength,
                                    nFeatureFlags, gxvalid );
    p += gxvalid->subtable_length;
    gxv_mort_subtables_validate( p, table + chainLength, nSubtables, gxvalid );
    gxvalid->subtable_length = chainLength;

    /* TODO: validate defaultFlags */
    GXV_EXIT;
  }

开发者ID:OpenTechEngine，项目名称:OpenTechBFG，代码行数:35，代码来源:gxvmort.c

示例9: gxv_mort_chain_validate

  static void
  gxv_mort_chain_validate( FT_Bytes       table,
                           FT_Bytes       limit,
                           GXV_Validator  valid )
  {
    FT_Bytes   p = table;
    FT_ULong   defaultFlags;
    FT_ULong   chainLength;
    FT_UShort  nFeatureFlags;
    FT_UShort  nSubtables;


    GXV_NAME_ENTER( "mort chain header" );

    GXV_LIMIT_CHECK( 4 + 4 + 2 + 2 );
    defaultFlags  = FT_NEXT_ULONG( p );
    chainLength   = FT_NEXT_ULONG( p );
    nFeatureFlags = FT_NEXT_USHORT( p );
    nSubtables    = FT_NEXT_USHORT( p );

    gxv_mort_featurearray_validate( p, table + chainLength,
                                    nFeatureFlags, valid );
    p += valid->subtable_length;
    gxv_mort_subtables_validate( p, table + chainLength, nSubtables, valid );
    valid->subtable_length = chainLength;

    GXV_EXIT;
  }

开发者ID:BlairArchibald，项目名称:Alexandria，代码行数:28，代码来源:gxvmort.c

示例10: gxv_just_actSubrecord_type4_validate

  static void
  gxv_just_actSubrecord_type4_validate( FT_Bytes       table,
                                        FT_Bytes       limit,
                                        GXV_Validator  gxvalid )
  {
    FT_Bytes  p = table;
    FT_ULong  variantsAxis;
    FT_Fixed  minimumLimit;
    FT_Fixed  noStretchValue;
    FT_Fixed  maximumLimit;


    GXV_LIMIT_CHECK( 4 + 4 + 4 + 4 );
    variantsAxis   = FT_NEXT_ULONG( p );
    minimumLimit   = FT_NEXT_ULONG( p );
    noStretchValue = FT_NEXT_ULONG( p );
    maximumLimit   = FT_NEXT_ULONG( p );

    gxvalid->subtable_length = p - table;

    if ( variantsAxis != 0x64756374L ) /* 'duct' */
      GXV_TRACE(( "variantsAxis 0x%08x is non default value",
                   variantsAxis ));

    if ( minimumLimit > noStretchValue )
      GXV_TRACE(( "type4:minimumLimit 0x%08x > noStretchValue 0x%08x\n",
                  minimumLimit, noStretchValue ));
    else if ( noStretchValue > maximumLimit )
      GXV_TRACE(( "type4:noStretchValue 0x%08x > maximumLimit 0x%08x\n",
                  noStretchValue, maximumLimit ));
    else if ( !IS_PARANOID_VALIDATION )
      return;

    FT_INVALID_DATA;
  }

开发者ID:OpenTechEngine，项目名称:OpenTechBFG，代码行数:35，代码来源:gxvjust.c

示例11: gxv_morx_subtable_type2_validate

  gxv_morx_subtable_type2_validate( FT_Bytes       table,
                                    FT_Bytes       limit,
                                    GXV_Validator  gxvalid )
  {
    FT_Bytes  p = table;

    GXV_morx_subtable_type2_StateOptRec  lig_rec;


    GXV_NAME_ENTER( "morx chain subtable type2 (Ligature Substitution)" );

    GXV_LIMIT_CHECK( GXV_MORX_SUBTABLE_TYPE2_HEADER_SIZE );

    gxvalid->xstatetable.optdata =
      &lig_rec;
    gxvalid->xstatetable.optdata_load_func =
      gxv_morx_subtable_type2_opttable_load;
    gxvalid->xstatetable.subtable_setup_func =
      gxv_morx_subtable_type2_subtable_setup;
    gxvalid->xstatetable.entry_glyphoffset_fmt =
      GXV_GLYPHOFFSET_USHORT;
    gxvalid->xstatetable.entry_validate_func =
      gxv_morx_subtable_type2_entry_validate;

    gxv_XStateTable_validate( p, limit, gxvalid );

#if 0
    p += gxvalid->subtable_length;
#endif
    gxv_morx_subtable_type2_ligatureTable_validate( table, gxvalid );

    GXV_EXIT;
  }

开发者ID:AaronNGray，项目名称:texlive-libs，代码行数:33，代码来源:gxvmorx2.c

示例12: gxv_opbd_LookupValue_validate

  static void
  gxv_opbd_LookupValue_validate( FT_UShort            glyph,
                                 GXV_LookupValueCPtr  value_p,
                                 GXV_Validator        valid )
  {
    /* offset in LookupTable is measured from the head of opbd table */
    FT_Bytes   p     = valid->root->base + value_p->u;
    FT_Bytes   limit = valid->root->limit;
    FT_Short   delta_value;
    int        i;


    if ( value_p->u < GXV_OPBD_DATA( valueOffset_min ) )
      GXV_OPBD_DATA( valueOffset_min ) = value_p->u;

    for ( i = 0; i < 4; i++ )
    {
      GXV_LIMIT_CHECK( 2 );
      delta_value = FT_NEXT_SHORT( p );

      if ( GXV_OPBD_DATA( format ) )    /* format 1, value is ctrl pt. */
      {
        if ( delta_value == -1 )
          continue;

        gxv_ctlPoint_validate( glyph, delta_value, valid );
      }
      else                              /* format 0, value is distance */
        continue;
    }
  }

开发者ID:2or3，项目名称:PlaygroundOSS，代码行数:31，代码来源:gxvopbd.c

示例13: gxv_just_justClassTable_validate

  static void
  gxv_just_justClassTable_validate ( FT_Bytes       table,
                                     FT_Bytes       limit,
                                     GXV_Validator  valid )
  {
    FT_Bytes   p = table;
    FT_UShort  length;
    FT_UShort  coverage;
    FT_ULong   subFeatureFlags;


    GXV_NAME_ENTER( "just justClassTable" );

    GXV_LIMIT_CHECK( 2 + 2 + 4 );
    length          = FT_NEXT_USHORT( p );
    coverage        = FT_NEXT_USHORT( p );
    subFeatureFlags = FT_NEXT_ULONG( p );

    GXV_TRACE(( "  justClassTable: coverage = 0x%04x (%s)",
                coverage,
                ( 0x4000 & coverage ) == 0 ? "ascending" : "descending" ));

    valid->statetable.optdata               = NULL;
    valid->statetable.optdata_load_func     = NULL;
    valid->statetable.subtable_setup_func   = NULL;
    valid->statetable.entry_glyphoffset_fmt = GXV_GLYPHOFFSET_NONE;
    valid->statetable.entry_validate_func   =
      gxv_just_classTable_entry_validate;

    gxv_StateTable_validate( p, table + length, valid );

    /* subtable_length is set by gxv_LookupTable_validate() */

    GXV_EXIT;
  }

开发者ID:0309，项目名称:cocos2d-x，代码行数:35，代码来源:gxvjust.c

示例14: gxv_mort_subtable_type2_ligatureTable_validate

  static void
  gxv_mort_subtable_type2_ligatureTable_validate( FT_Bytes       table,
                                                  GXV_Validator  valid )
  {
    GXV_mort_subtable_type2_StateOptRecData  optdata =
      (GXV_mort_subtable_type2_StateOptRecData)valid->statetable.optdata;

    FT_Bytes p     = table + optdata->ligatureTable;
    FT_Bytes limit = table + optdata->ligatureTable
                           + optdata->ligatureTable_length;


    GXV_NAME_ENTER( "mort chain subtable type2 - substitutionTable" );
    if ( 0 != optdata->ligatureTable )
    {
      /* Apple does not give specification of ligatureTable format */
      while ( p < limit )
      {
        FT_UShort  lig_gid;


        GXV_LIMIT_CHECK( 2 );
        lig_gid = FT_NEXT_USHORT( p );
      }
    }
    GXV_EXIT;
  }

开发者ID:0309，项目名称:cocos2d-x，代码行数:27，代码来源:gxvmort2.c

示例15: gxv_mort_subtable_type2_validate

  gxv_mort_subtable_type2_validate( FT_Bytes       table,
                                    FT_Bytes       limit,
                                    GXV_Validator  valid )
  {
    FT_Bytes  p = table;

    GXV_mort_subtable_type2_StateOptRec  lig_rec;


    GXV_NAME_ENTER( "mort chain subtable type2 (Ligature Substitution)" );

    GXV_LIMIT_CHECK( GXV_MORT_SUBTABLE_TYPE2_HEADER_SIZE );

    valid->statetable.optdata =
      &lig_rec;
    valid->statetable.optdata_load_func =
      gxv_mort_subtable_type2_opttable_load;
    valid->statetable.subtable_setup_func =
      gxv_mort_subtable_type2_subtable_setup;
    valid->statetable.entry_glyphoffset_fmt =
      GXV_GLYPHOFFSET_NONE;
    valid->statetable.entry_validate_func =
      gxv_mort_subtable_type2_entry_validate;

    gxv_StateTable_validate( p, limit, valid );

    p += valid->subtable_length;
    gxv_mort_subtable_type2_ligatureTable_validate( table, valid );

    valid->subtable_length = p - table;

    GXV_EXIT;
  }

开发者ID:0309，项目名称:cocos2d-x，代码行数:33，代码来源:gxvmort2.c

示例16: gxv_kern_subtable_fmt2_clstbl_validate

  static void
  gxv_kern_subtable_fmt2_clstbl_validate( FT_Bytes            table,
                                          FT_Bytes            limit,
                                          GXV_kern_ClassSpec  spec,
                                          GXV_Validator       valid )
  {
    const FT_String*  tag    = GXV_KERN_FMT2_DATA( class_tag[spec] );
    GXV_odtect_Range  odtect = GXV_KERN_FMT2_DATA( odtect );

    FT_Bytes   p = table;
    FT_UShort  firstGlyph;
    FT_UShort  nGlyphs;


    GXV_NAME_ENTER( "kern format 2 classTable" );

    GXV_LIMIT_CHECK( 2 + 2 );
    firstGlyph = FT_NEXT_USHORT( p );
    nGlyphs    = FT_NEXT_USHORT( p );
    GXV_TRACE(( " %s firstGlyph=%d, nGlyphs=%d\n",
                tag, firstGlyph, nGlyphs ));

    gxv_glyphid_validate( firstGlyph, valid );
    gxv_glyphid_validate( (FT_UShort)( firstGlyph + nGlyphs - 1 ), valid );

    gxv_array_getlimits_ushort( p, p + ( 2 * nGlyphs ),
                                &( GXV_KERN_FMT2_DATA( offset_min[spec] ) ),
                                &( GXV_KERN_FMT2_DATA( offset_max[spec] ) ),
                                valid );

    gxv_odtect_add_range( table, 2 * nGlyphs, tag, odtect );

    GXV_EXIT;
  }

开发者ID:CarloMaker，项目名称:Urho3D，代码行数:34，代码来源:gxvkern.c

示例17: gxv_kern_subtable_fmt0_validate

  static void
  gxv_kern_subtable_fmt0_validate( FT_Bytes       table,
                                   FT_Bytes       limit,
                                   GXV_Validator  valid )
  {
    FT_Bytes   p = table + GXV_KERN_SUBTABLE_HEADER_SIZE;

    FT_UShort  nPairs;
    FT_UShort  unitSize;


    GXV_NAME_ENTER( "kern subtable format 0" );

    unitSize = 2 + 2 + 2;
    nPairs   = 0;

    /* nPairs, searchRange, entrySelector, rangeShift */
    GXV_LIMIT_CHECK( 2 + 2 + 2 + 2 );
    gxv_BinSrchHeader_validate( p, limit, &unitSize, &nPairs, valid );
    p += 2 + 2 + 2 + 2;

    gxv_kern_subtable_fmt0_pairs_validate( p, limit, nPairs, valid );

    GXV_EXIT;
  }

开发者ID:CarloMaker，项目名称:Urho3D，代码行数:25，代码来源:gxvkern.c

示例18: gxv_just_wdp_entry_validate

  static void
  gxv_just_wdp_entry_validate( FT_Bytes       table,
                               FT_Bytes       limit,
                               GXV_Validator  valid )
  {
    FT_Bytes   p = table;
    FT_ULong   justClass;
    FT_Fixed   beforeGrowLimit;
    FT_Fixed   beforeShrinkGrowLimit;
    FT_Fixed   afterGrowLimit;
    FT_Fixed   afterShrinkGrowLimit;
    FT_UShort  growFlags;
    FT_UShort  shrinkFlags;


    GXV_LIMIT_CHECK( 4 + 4 + 4 + 4 + 4 + 2 + 2 );
    justClass             = FT_NEXT_ULONG( p );
    beforeGrowLimit       = FT_NEXT_ULONG( p );
    beforeShrinkGrowLimit = FT_NEXT_ULONG( p );
    afterGrowLimit        = FT_NEXT_ULONG( p );
    afterShrinkGrowLimit  = FT_NEXT_ULONG( p );
    growFlags             = FT_NEXT_USHORT( p );
    shrinkFlags           = FT_NEXT_USHORT( p );

    /* TODO: decode flags for human readability */

    valid->subtable_length = p - table;
  }

开发者ID:0309，项目名称:cocos2d-x，代码行数:28，代码来源:gxvjust.c

示例19: gxv_morx_subtable_type1_substitutionTable_validate

  /*
   * TODO: length should be limit?
   **/
  static void
  gxv_morx_subtable_type1_substitutionTable_validate( FT_Bytes       table,
                                                      FT_Bytes       limit,
                                                      GXV_Validator  valid )
  {
    FT_Bytes   p = table;
    FT_UShort  i;

    GXV_morx_subtable_type1_StateOptRecData  optdata =
      (GXV_morx_subtable_type1_StateOptRecData)valid->xstatetable.optdata;


    /* TODO: calculate offset/length for each lookupTables */
    valid->lookupval_sign   = GXV_LOOKUPVALUE_UNSIGNED;
    valid->lookupval_func   = gxv_morx_subtable_type1_LookupValue_validate;
    valid->lookupfmt4_trans = gxv_morx_subtable_type1_LookupFmt4_transit;

    for ( i = 0; i < optdata->substitutionTable_num_lookupTables; i++ )
    {
      FT_ULong  offset;


      GXV_LIMIT_CHECK( 4 );
      offset = FT_NEXT_ULONG( p );

      gxv_LookupTable_validate( table + offset, limit, valid );
    }

    /* TODO: overlapping of lookupTables in substitutionTable */
  }

开发者ID:0302zq，项目名称:libgdx，代码行数:33，代码来源:gxvmorx1.c

示例20: gxv_just_actSubrecord_type2_validate

  static void
  gxv_just_actSubrecord_type2_validate( FT_Bytes       table,
                                        FT_Bytes       limit,
                                        GXV_Validator  gxvalid )
  {
    FT_Bytes   p = table;
#ifdef GXV_LOAD_UNUSED_VARS
    FT_Fixed      substThreshhold; /* Apple misspelled "Threshhold" */
#endif
    FT_UShort  addGlyph;
    FT_UShort  substGlyph;


    GXV_LIMIT_CHECK( 4 + 2 + 2 );
#ifdef GXV_LOAD_UNUSED_VARS
    substThreshhold = FT_NEXT_ULONG( p );
#else
    p += 4;
#endif
    addGlyph        = FT_NEXT_USHORT( p );
    substGlyph      = FT_NEXT_USHORT( p );

    if ( addGlyph != 0xFFFF )
      gxv_just_check_max_gid( addGlyph, "type2:addGlyph", gxvalid );

    gxv_just_check_max_gid( substGlyph, "type2:substGlyph", gxvalid );

    gxvalid->subtable_length = p - table;
  }

开发者ID:OpenTechEngine，项目名称:OpenTechBFG，代码行数:29，代码来源:gxvjust.c

注：本文中的GXV_LIMIT_CHECK函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ GXV_NAME_ENTER函数代码示例发布时间：2022-05-30

C++ GWidgetGetControl函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19189|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9988|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8326|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8696|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8639|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9657|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8624|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7998|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8656|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7535|2022-11-06

客服电话

电子邮件

C++ GXV_LIMIT_CHECK函数代码示例

示例1: gxv_mort_subtable_type1_substTable_validate

示例2: gxv_morx_chain_validate

示例3: gxv_morx_subtable_type2_ligatureTable_validate

示例4: gxv_morx_subtable_type1_validate

示例5: gxv_mort_subtable_type5_validate

示例6: gxv_feat_setting_validate

示例7: gxv_mort_featurearray_validate

示例8: gxv_mort_chain_validate

示例9: gxv_mort_chain_validate

示例10: gxv_just_actSubrecord_type4_validate

示例11: gxv_morx_subtable_type2_validate

示例12: gxv_opbd_LookupValue_validate

示例13: gxv_just_justClassTable_validate

示例14: gxv_mort_subtable_type2_ligatureTable_validate

示例15: gxv_mort_subtable_type2_validate

示例16: gxv_kern_subtable_fmt2_clstbl_validate

示例17: gxv_kern_subtable_fmt0_validate

示例18: gxv_just_wdp_entry_validate

示例19: gxv_morx_subtable_type1_substitutionTable_validate

示例20: gxv_just_actSubrecord_type2_validate

请发表评论

全部评论

上一篇：

下一篇：

CVE-2022-2115

dustinvtran/ml-videos: A collection of v

ravikumar001/maven

更的笔顺,体会更的笔画,理会更的部首

ceejbot/LOUDBOT: AUTOMATED SHOUTING FOR

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053