C++ GT_assert函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中GT_assert函数的典型用法代码示例。如果您正苦于以下问题：C++ GT_assert函数的具体用法？C++ GT_assert怎么用？C++ GT_assert使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了GT_assert函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: syslink_frameq_close

int syslink_frameq_close(resmgr_context_t *ctp, io_devctl_t *msg, syslink_ocb_t *ocb){

			FrameQDrv_CmdArgs *cargs = (FrameQDrv_CmdArgs *) (_DEVCTL_DATA (msg->i));
			FrameQDrv_CmdArgs *out = (FrameQDrv_CmdArgs *) (_DEVCTL_DATA (msg->o));

			out->apiStatus = FrameQ_close ((FrameQ_Handle *)&(cargs->args.close.handle));
            GT_assert (curTrace, (out->apiStatus >= 0));

			return (_RESMGR_PTR (ctp, &msg->o, sizeof (msg->o) + sizeof(FrameQDrv_CmdArgs)));
}

开发者ID:zaporozhets，项目名称:ti_ezsdk_tools，代码行数:10，代码来源:FrameQ_devctl.c

示例2: _ACPY3_init

/*
 *  ======== _ACPY3_init ========
 *  Initialize the ACPY3 module
 */
static void _ACPY3_init(Void)
{
    GT_0trace(CURTRACE, GT_ENTER, "_ACPY3_init > Enter\n");


    if (refCount == 0) {

#ifndef _ACPY3_CPUCOPY_
        _ACPY3_qdmaInit();
#endif
        initQdmaSettings();

#ifndef _ACPY3_CPUCOPY_
        _ACPY3_lock = LockMP_create(_ACPY3_SEMKEY);
        GT_assert(CURTRACE, _ACPY3_lock != NULL);
#endif
    }

     /* count references even if no allocation is done */
     /* so that memory free is done only when last node requires ACPY3 */
    refCount++;

    GT_assert(CURTRACE, verifyOffset(ACPY3_PARAMFIELD_ELEMENTSIZE,
                            ACPY3_PaRamRegs, acnt));
    GT_assert(CURTRACE, verifyOffset(ACPY3_PARAMFIELD_NUMELEMENTS,
                            ACPY3_PaRamRegs, bcnt));
    GT_assert(CURTRACE, verifyOffset(ACPY3_PARAMFIELD_ELEMENTINDEX_SRC,
                            ACPY3_PaRamRegs, srcElementIndex));
    GT_assert(CURTRACE, verifyOffset(ACPY3_PARAMFIELD_ELEMENTINDEX_DST,
                            ACPY3_PaRamRegs, dstElementIndex));
    GT_assert(CURTRACE, verifyOffset(ACPY3_PARAMFIELD_FRAMEINDEX_SRC,
                            ACPY3_PaRamRegs, srcFrameIndex));
    GT_assert(CURTRACE, verifyOffset(ACPY3_PARAMFIELD_FRAMEINDEX_DST,
                            ACPY3_PaRamRegs, dstFrameIndex));
    GT_assert(CURTRACE, verifyOffset(ACPY3_PARAMFIELD_NUMFRAMES,
                            ACPY3_PaRamRegs, ccnt));
    GT_assert(CURTRACE, verifyOffset(ACPY3_PARAMFIELD_SRCADDR,
                            ACPY3_PaRamRegs, src));
    GT_assert(CURTRACE, verifyOffset(ACPY3_PARAMFIELD_DSTADDR,
                            ACPY3_PaRamRegs, dst));

    GT_0trace(CURTRACE, GT_ENTER, "_ACPY3_init > Exit\n");
}

开发者ID:andreimironenko，项目名称:framework-components-dm365，代码行数:47，代码来源:acpy3_arm.c

示例3: unmarshallMsg

/*
 *  ======== unmarshallMsg ========
 */
static XDAS_Int32 unmarshallMsg(IVIDDEC_Handle h, XDM_BufDesc *inBufs,
    XDM_BufDesc *outBufs, IVIDDEC_InArgs *inArgs, IVIDDEC_OutArgs *outArgs,
    _VIDDEC_Msg *msg, XDAS_Int32 retVal)
{
    VISA_Handle visa = (VISA_Handle)h;
    IVIDDEC_OutArgs *pMsgOutArgs;
    Int i;

    /*
     * Do a wholesale replace of skeleton returned structure.
     * Pointer conversion of fields in outArgs is done below (only
     * in the case of a successful return value).
     */
    pMsgOutArgs = (IVIDDEC_OutArgs *)((UInt)(&(msg->cmd.process.inArgs)) +
        inArgs->size);

    if (VISA_isChecked()) {
        /* ensure the codec didn't change outArgs->size */
        GT_assert(CURTRACE, pMsgOutArgs->size == outArgs->size);
    }

    memcpy(outArgs, pMsgOutArgs, outArgs->size);

    /* if VISA_call was successful, also unmarshall outBufs */
    if (retVal == VIDDEC_EOK) {
        /* unmarshall the output data: outBufs and outArgs. */

        /* The outBufs may have changed
         * - [dm]TODO:H find out if outBufs can change so we can save some
         * cycles! and outArgs buffers may have been provided. All these
         * values are "raw", as seen by the DSP, so those physical addresses
         * must be converted to user addresses first.
         */
        for (i = 0; i < msg->cmd.process.numOutBufs; i++) {
            outBufs->bufSizes[i] = msg->cmd.process.outBufSizes[i];

            outBufs->bufs[i] = Memory_getBufferVirtualAddress(
                (UInt32)msg->cmd.process.outBufs[i],
                msg->cmd.process.outBufSizes[i]);
        }

        /* pointers in outArgs.displayBufs are physical, so convert them */
        for (i = 0; i < outArgs->displayBufs.numBufs; i++) {
            outArgs->displayBufs.bufs[i] = Memory_getBufferVirtualAddress(
                (UInt32)(outArgs->displayBufs.bufs[i]),
                outArgs->displayBufs.bufSizes[i]);
        }
    }

    /* Note that we did *nothing* with inBufs nor inArgs.  This should be ok. */

    VISA_freeMsg(visa, (VISA_Msg)msg);

    return (retVal);
}

开发者ID:black1tulip，项目名称:DVSDK，代码行数:58，代码来源:viddec_stubs.c

示例4: ACPY3_wait

/*
 *  ======== ACPY3_wait ========
 *  Wait for all submitted DMA transfer on this logical channel to complete.
 */
Void ACPY3_wait(IDMA3_Handle handle)
{
    GT_1trace(CURTRACE, GT_ENTER, "ACPY3_wait> Enter "
            "(handle=0x%x)\n",handle);
    
    GT_assert(CURTRACE, handle != NULL);

     ACPY3_INSTR_CALLHOOKFXN(((ACPY3_MoreEnv *)(handle->env))->hooks,handle,\
            ACPY3_INSTR_WAIT_ENTER);

    /*
     * Wait for a channel only once. Set the 'pending' flag whenever new
     * transfer is submitted, then clear it when ACPY3_wait* is issued.
     */
    if (!handle->transferPending) {
        ACPY3_INSTR_CALLHOOKFXN(((ACPY3_MoreEnv *)(handle->env))->hooks,handle,
                ACPY3_INSTR_WAIT_EXIT);

        GT_0trace(CURTRACE, GT_4CLASS, "_ACPY3_start> No transfer"
                " pending\n");

        GT_0trace(CURTRACE, GT_ENTER, "_ACPY3_start> Exit\n");

        return;  /* already  waited since last start. */
    }

    doTransfer(handle);

    /*
     * Mark channel handle state to indicate pending transfer has completed
     * and 'wait' done
     */
    handle->transferPending = FALSE;

     ACPY3_INSTR_CALLHOOKFXN(((ACPY3_MoreEnv *)(handle->env))->hooks,handle,\
            ACPY3_INSTR_WAIT_EXIT);

    GT_assert(CURTRACE, handle->transferPending == FALSE);

    GT_0trace(CURTRACE, GT_ENTER, "ACPY3_wait> Exit\n");
    
}

开发者ID:andreimironenko，项目名称:framework-components-dm365，代码行数:46，代码来源:acpy3_wait_cpucopy.c

示例5: FrameQ_getFrameBufDataStartOffset

/*
 * @brief Function to get the valid data start offset in framebuffer
 *       identified by the frame buffer number in a given frame.
 *
 * @param buf              frame.
 * @param frameBufNum      frame buffer number.
 */
UInt32
FrameQ_getFrameBufDataStartOffset(FrameQ_Frame  frame,
                                  UInt32        frameBufNum )
{
    UInt32              offSet  = -1;
    FrameQ_FrameBufInfo *frameBufInfo;

    GT_2trace (curTrace,
               GT_ENTER,
               "FrameQ_getFrameBufDataStartOffset",
               frame,
               frameBufNum);

    GT_assert (curTrace, (NULL != frame));

    GT_assert (curTrace, (frame->numFrameBuffers > frameBufNum)) ;

    frameBufInfo = (FrameQ_FrameBufInfo *)&(frame->frameBufInfo[0]);
#if !defined(SYSLINK_BUILD_OPTIMIZE)
    if (frame->numFrameBuffers < frameBufNum) {
        /*! @retval 0xFFFFFFFF  frameBufNum provided should be less
         * from 0 to number of frame buffers -1
         */
        GT_setFailureReason (curTrace,
                             GT_4CLASS,
                             "FrameQ_getFrameBufDataStartOffset",
                             FrameQ_E_INVALIDARG,
                             "frameBufNum provided should be less from 0 to "
                             "number of frame buffers -1 .!");
    }
    else {
#endif /*#if !defined(SYSLINK_BUILD_OPTIMIZE)*/
        offSet = frameBufInfo[frameBufNum].startOffset;
#if !defined(SYSLINK_BUILD_OPTIMIZE)
    }
#endif /*#if !defined(SYSLINK_BUILD_OPTIMIZE)*/

    GT_1trace (curTrace, GT_LEAVE, "FrameQ_getFrameBufDataStartOffset", offSet);

    /*! @retval size  frame buffer data start offset in the frame buffer */
    return (offSet) ;
}

开发者ID:zaporozhets，项目名称:ti_ezsdk_tools，代码行数:49，代码来源:FrameQ_common.c

示例6: Omap3530IpcInt_waitClearInterrupt

/*!
 *  @brief      Function to wait for interrupt to be cleared.
 *
 *  @param      procId  Remote processor ID
 *  @param      intId   interrupt id
 *
 *  @sa         Omap3530IpcInt_sendInterrupt
 */
Int32
Omap3530IpcInt_waitClearInterrupt (UInt16 procId, UInt32 intId)
{
    Int32 status = OMAP3530IPCINT_SUCCESS;

    GT_2trace (curTrace,GT_ENTER,"Omap3530IpcInt_waitClearInterrupt",
               procId, intId);

    GT_assert (curTrace, (ArchIpcInt_object.isSetup == TRUE));
    GT_assert (curTrace, (procId < MultiProc_MAXPROCESSORS));

    /* Wait for GPP to clear the previous interrupt */
    while ((REG32((Omap3530IpcInt_state.mailboxBase + MAILBOX_MSGSTATUS_1_OFFSET)) & 7 ));

    GT_1trace (curTrace,GT_LEAVE,"Omap3530IpcInt_waitClearInterrupt", status);

    /*! @retval OMAP3530IPCINT_SUCCESS Wait for interrupt clearing successfully
                completed. */
    return status;
}

开发者ID:andreimironenko，项目名称:syslink，代码行数:28，代码来源:Omap3530IpcInt.c

示例7: syslink_frameq_destroy

int syslink_frameq_destroy(resmgr_context_t *ctp, io_devctl_t *msg, syslink_ocb_t *ocb){

			FrameQDrv_CmdArgs *out = (FrameQDrv_CmdArgs *) (_DEVCTL_DATA (msg->o));

			out->apiStatus = FrameQ_destroy ();

			GT_assert (curTrace, (	out->apiStatus  >= 0));

			return (_RESMGR_PTR (ctp, &msg->o, sizeof (msg->o) + sizeof(FrameQDrv_CmdArgs)));

}

开发者ID:zaporozhets，项目名称:ti_ezsdk_tools，代码行数:11，代码来源:FrameQ_devctl.c

示例8: syslink_messageq_destroy

/**
 * Handler for messageq destroy API.
 *
 * \param ctp	Thread's associated context information.
 * \param msg	The actual devctl() message.
 * \param ocb	OCB associated with client's session.
 *
 * \return POSIX errno value.
 *
 * \retval EOK		Success.
 * \retval ENOTSUP	Unsupported devctl().
 */
int syslink_messageq_destroy(resmgr_context_t *ctp, io_devctl_t *msg, syslink_ocb_t *ocb) {

	MessageQDrv_CmdArgs *		out  = (MessageQDrv_CmdArgs *) (_DEVCTL_DATA (msg->o));

	out->apiStatus = MessageQ_destroy ();
    GT_assert (curTrace, (	out->apiStatus  >= 0));
    if (out->apiStatus >= 0)
    	remove_ocb_res(ocb, DCMD_MESSAGEQ_DESTROY, NULL, NULL);

	return (_RESMGR_PTR (ctp, &msg->o, sizeof (msg->o) + sizeof(MessageQDrv_CmdArgs)));
}

开发者ID:andreimironenko，项目名称:syslink，代码行数:23，代码来源:messageq_devctl.c

示例9: syslink_sharedregion_detach

/**
 * Handler for shared region detach API.
 *
 * \param ctp	Thread's associated context information.
 * \param msg	The actual devctl() message.
 * \param ocb	OCB associated with client's session.
 *
 * \return POSIX errno value.
 *
 * \retval EOK		Success.
 * \retval ENOTSUP	Unsupported devctl().
 */
int syslink_sharedregion_detach(resmgr_context_t *ctp, io_devctl_t *msg, syslink_ocb_t *ocb) {

	SharedRegionDrv_CmdArgs *		cargs = (SharedRegionDrv_CmdArgs *) (_DEVCTL_DATA (msg->i));
	SharedRegionDrv_CmdArgs *		out  = (SharedRegionDrv_CmdArgs *) (_DEVCTL_DATA (msg->o));

	out->apiStatus = SharedRegion_detach (cargs->args.attach.remoteProcId);
	GT_assert (curTrace, (out->apiStatus >= 0));

	return (_RESMGR_PTR (ctp, &msg->o, sizeof (msg->o) + sizeof(SharedRegionDrv_CmdArgs)));

}

开发者ID:zaporozhets，项目名称:ti_ezsdk_tools，代码行数:23，代码来源:Sharedregion_devctl.c

示例10: ACPY3_fastConfigure32b

/*
 *  ======== ACPY3_fastConfigure32b ========
 */
Void ACPY3_fastConfigure32b(IDMA3_Handle restrict handle,
    ACPY3_ParamField32b fieldId, Uns value, short transferNo)
{
    ACPY3_PaRamRegs * paRamCache;
#ifndef _ACPY3_CPUCOPY_
    UInt32            physVal;
    Int               size;
#endif

    GT_assert(CURTRACE, handle != NULL);
    GT_assert(CURTRACE, handle->protocol == &ACPY3_PROTOCOL);
    GT_assert(CURTRACE, transferNo >= 0);
    GT_assert(CURTRACE,
            transferNo < ((ACPY3_MoreEnv *)(handle->env))->numPaRams);
    GT_assert(CURTRACE, !handle->transferPending);

    GT_4trace(CURTRACE, GT_ENTER, "ACPY3_fastConfigure32b> "
            "Enter (handle=0x%x, fieldId=0x%x, value=0x%x, transferNo=%d)\n",
            handle, fieldId, value, transferNo);

    paRamCache = (ACPY3_PaRamRegs *)ACPY3_getPaRamCache(handle, transferNo);

#ifndef _ACPY3_CPUCOPY_
    /* Address fields must be converted to physical address */
    size = 4; /* Otherwise we have to read the registers */
    if ((fieldId == ACPY3_PARAMFIELD_SRCADDR) ||
            (fieldId == ACPY3_PARAMFIELD_DSTADDR)) {
        physVal = (UInt32)MEMUTILS_getPhysicalAddr((Ptr)value);
        *((Uns *)((Uns)paRamCache + fieldId)) = physVal;
    }
    else {
        /* Non-address field */
        *((Uns *)((Uns)paRamCache + fieldId)) = value;
    }
#else
    *((Uns *)((Uns)paRamCache + fieldId)) = value;
#endif

    GT_0trace(CURTRACE, GT_ENTER, "ACPY3_fastConfigure32b> Exit\n");

}

开发者ID:andreimironenko，项目名称:framework-components-dm365，代码行数:44，代码来源:acpy3_fastconfigure32b.c

示例11: FrameQ_getFrameBufValidSize

/*
 * @brief Function to get the  valid data size of a framebuffer
 *       identified by the frame buffer number in a given frame.
 *
 * @param buf              frame.
 * @param frameBufNum      frame buffer number.
 */
UInt32
FrameQ_getFrameBufValidSize(FrameQ_Frame frame, UInt32 frameBufNum )
{
    UInt32 size  = 0;
    FrameQ_FrameBufInfo *frameBufInfo;

    GT_2trace (curTrace,
               GT_ENTER,
               "FrameQ_getFrameBufValidSize",
               frame,
               frameBufNum);

    GT_assert (curTrace, (NULL != frame));

    GT_assert (curTrace, (frame->numFrameBuffers > frameBufNum)) ;

    frameBufInfo = (FrameQ_FrameBufInfo *)&(frame->frameBufInfo[0]);
#if !defined(SYSLINK_BUILD_OPTIMIZE)
    if (frame->numFrameBuffers < frameBufNum) {
        /*! @retval 0  frameBufNum provided should be less
         * from 0 to number of frame buffers -1
         */
        GT_setFailureReason (curTrace,
                             GT_4CLASS,
                             "FrameQ_getFrameBufValidSize",
                             FrameQ_E_INVALIDARG,
                             "frameBufNum provided should be less from 0 to "
                             "number of frame buffers -1 .!");
    }
    else {
#endif /*#if !defined(SYSLINK_BUILD_OPTIMIZE)*/
        size = frameBufInfo[frameBufNum].validSize;
#if !defined(SYSLINK_BUILD_OPTIMIZE)
    }
#endif /*#if !defined(SYSLINK_BUILD_OPTIMIZE)*/

    GT_1trace (curTrace, GT_LEAVE, "FrameQ_getFrameBufValidSize", size);

    /*! @retval size  frame buffer valid size */
    return (size) ;
}

开发者ID:zaporozhets，项目名称:ti_ezsdk_tools，代码行数:48，代码来源:FrameQ_common.c

示例12: syslink_sharedregion_start

/**
 * Handler for shared region start API.
 *
 * \param ctp	Thread's associated context information.
 * \param msg	The actual devctl() message.
 * \param ocb	OCB associated with client's session.
 *
 * \return POSIX errno value.
 *
 * \retval EOK		Success.
 * \retval ENOTSUP	Unsupported devctl().
 */
int syslink_sharedregion_start(resmgr_context_t *ctp, io_devctl_t *msg, syslink_ocb_t *ocb) {


	SharedRegionDrv_CmdArgs *		out = (SharedRegionDrv_CmdArgs *) (_DEVCTL_DATA (msg->o));

	out->apiStatus  = SharedRegion_start ();
	GT_assert (curTrace, (out->apiStatus >= 0));

	return (_RESMGR_PTR (ctp, &msg->o, sizeof (msg->o) + sizeof(SharedRegionDrv_CmdArgs)));


}

开发者ID:zaporozhets，项目名称:ti_ezsdk_tools，代码行数:24，代码来源:Sharedregion_devctl.c

示例13: syslink_sharedregion_setup

/**
 * Handler for shared region setup API.
 *
 * \param ctp	Thread's associated context information.
 * \param msg	The actual devctl() message.
 * \param ocb	OCB associated with client's session.
 *
 * \return POSIX errno value.
 *
 * \retval EOK		Success.
 * \retval ENOTSUP	Unsupported devctl().
 */
int syslink_sharedregion_setup(resmgr_context_t *ctp, io_devctl_t *msg, syslink_ocb_t *ocb) {


	SharedRegionDrv_CmdArgs *		cargs = (SharedRegionDrv_CmdArgs *) (_DEVCTL_DATA (msg->i));
	SharedRegionDrv_CmdArgs *		out  = (SharedRegionDrv_CmdArgs *) (_DEVCTL_DATA (msg->o));

	SharedRegion_Config   *config = (SharedRegion_Config*)(cargs+1);
	 SharedRegion_Region   *region = (SharedRegion_Region *)(config+1);
	 UInt16 			 i;

	 out->apiStatus = SharedRegion_setup (config);
	 GT_assert (curTrace, (out->apiStatus >= 0));

	 for (i = 0; i < config->numEntries; i++) {

		 SharedRegion_getRegionInfo (i, &region[i]);

		 if (region[i].entry.isValid == TRUE) {

			 /* Convert the kernel virtual address to physical
			  * addresses */
			 region[i].entry.base = MemoryOS_translate (
										(Ptr)region[i].entry.base,
										Memory_XltFlags_Virt2Phys);
			 GT_assert (curTrace, (region[i].entry.base != NULL));
		 }
	 }

    if (out->apiStatus >= 0) {
        /* Add this call to the list to be cleaned-up */
        add_ocb_res(ocb, DCMD_SHAREDREGION_DESTROY, (int)NULL, NULL);
    }

    SETIOV(&ctp->iov[0], &msg->o, sizeof(msg->o) + sizeof(SharedRegionDrv_CmdArgs));
	SETIOV(&ctp->iov[1], config, sizeof(SharedRegion_Config) );
  	SETIOV(&ctp->iov[2], region, config->numEntries*sizeof(SharedRegion_Region));

    return _RESMGR_NPARTS(3);

}

开发者ID:zaporozhets，项目名称:ti_ezsdk_tools，代码行数:52，代码来源:Sharedregion_devctl.c

示例14: IRES_MEMTCM_getMemRecs

/* ARGSUSED - this line tells the compiler not to warn about unused args. */
IRES_Status IRES_MEMTCM_getMemRecs(IRES_Handle handle, 
        IRES_ProtocolArgs * resProtocolArgs, IALG_MemRec *memRecs)
{
    /*
    IRES_MEMTCM_ProtocolArgs * protocolArgs = 
            (IRES_MEMTCM_ProtocolArgs *)resProtocolArgs;
    */

    GT_3trace(ti_sdo_fc_ires_memtcm_GTMask, GT_ENTER, 
            "_IRES_MEMTCM_getMemRecs> Enter (handle=0x%x, "
            "resProtocolArgs=0x%x, memRecs=0x%x)\n", handle, resProtocolArgs, 
            memRecs);
    
    GT_assert(ti_sdo_fc_ires_memtcm_GTMask, memRecs != NULL);
    GT_assert(ti_sdo_fc_ires_memtcm_GTMask, resProtocolArgs != NULL);

    memRecs[0].alignment = 4;

    memRecs[0].size = sizeof(IRES_MEMTCM_Obj);

    /*
     * IALG_EXTERNAL because we don't care where this memory is allocated
     */
    memRecs[0].space = IALG_ESDATA;

    /*
     * Memory should be persistent. 
     */
    memRecs[0].attrs = IALG_PERSIST;

    GT_2trace(ti_sdo_fc_ires_memtcm_GTMask, GT_4CLASS, 
            "_IRES_MEMTCM_getMemRecs> Requesting memory of size 0x%x, "
            "alignment 0x%x, space IALG_ESDATA, attrs IALG_PERSIST)\n", 
            memRecs[0].size, memRecs[0].alignment);

    GT_0trace(ti_sdo_fc_ires_memtcm_GTMask, GT_ENTER, 
            "_IRES_MEMTCM_getMemRecs> Exit (status=IRES_OK)\n" );

    return (IRES_OK); /* number of MemRecs */
}

开发者ID:andreimironenko，项目名称:framework-components-dm365，代码行数:41，代码来源:ires_memtcm.c

示例15: syslink_frameq_setup

int syslink_frameq_setup(resmgr_context_t *ctp, io_devctl_t *msg, syslink_ocb_t *ocb){

			FrameQDrv_CmdArgs *cargs = (FrameQDrv_CmdArgs *) (_DEVCTL_DATA (msg->i));
			FrameQDrv_CmdArgs *out = (FrameQDrv_CmdArgs *) (_DEVCTL_DATA (msg->o));

			FrameQ_Config *config = (FrameQ_Config*)(cargs+1);

            out->apiStatus = FrameQ_setup (config);

			GT_assert (curTrace, (out->apiStatus >= 0));

			return (_RESMGR_PTR (ctp, &msg->o, sizeof (msg->o) + sizeof(FrameQDrv_CmdArgs)));
}

开发者ID:zaporozhets，项目名称:ti_ezsdk_tools，代码行数:13，代码来源:FrameQ_devctl.c

示例16: processWait

/*
 *  ======== processWait ========
 */
static XDAS_Int32 processWait(IVIDENC1_Handle h, IVIDEO1_BufDescIn *inBufs,
                              XDM_BufDesc *outBufs, IVIDENC1_InArgs *inArgs, IVIDENC1_OutArgs *outArgs,
                              UInt timeout)
{
    XDAS_Int32 retVal;
    _VIDENC1_Msg *msg;
    VISA_Handle visa = (VISA_Handle)h;

    GT_assert(CURTRACE, !VISA_isLocal(visa));

    /* wait for completion of "last" message */
    retVal = VISA_wait(visa, (VISA_Msg *)&msg, timeout);

    if (msg != NULL) {
        GT_assert(CURTRACE, msg->visa.cmd == _VIDENC1_CPROCESS);

        retVal = unmarshallMsg(h, inBufs, outBufs, inArgs, outArgs, msg,
                               retVal);
    }

    return retVal;
}

开发者ID:sv99，项目名称:DVSDK，代码行数:25，代码来源:videnc1_stubs.c

示例17: syslink_heapbufmp_destroy

/**
 * Handler for heap buf mp destroy API.
 *
 * \param ctp	Thread's associated context information.
 * \param msg	The actual devctl() message.
 * \param ocb	OCB associated with client's session.
 *
 * \return POSIX errno value.
 *
 * \retval EOK		Success.
 * \retval ENOTSUP	Unsupported devctl().
 */
int syslink_heapbufmp_destroy(resmgr_context_t *ctp, io_devctl_t *msg, syslink_ocb_t *ocb)
{
	HeapBufMPDrv_CmdArgs *		out  = (HeapBufMPDrv_CmdArgs *) (_DEVCTL_DATA (msg->o));

	out->apiStatus = HeapBufMP_destroy ();
	GT_assert (curTrace, (out->apiStatus >= 0));
    if (out->apiStatus >= 0) {
        /* Remove this call from the list to be cleaned-up */
        remove_ocb_res(ocb, DCMD_HEAPBUFMP_DESTROY, (int)NULL, NULL);
    }

	return (_RESMGR_PTR (ctp, &msg->o, sizeof (msg->o) + sizeof(HeapBufMPDrv_CmdArgs)));
}

开发者ID:andreimironenko，项目名称:syslink，代码行数:25，代码来源:Heapbufmp_devctl.c

示例18: IRES_SDMA_getMemRecs

/* ARGSUSED - this line tells the compiler not to warn about unused args. */
IRES_Status IRES_SDMA_getMemRecs(IRES_Handle handle,
        IRES_ProtocolArgs * resProtocolArgs, IALG_MemRec *memRecs)
{

    GT_3trace(ti_sdo_fc_ires_sdma_GTMask, GT_ENTER,
            "_IRES_SDMA_getMemRecs> Enter (handle=0x%x, "
            "resProtocolArgs=0x%x, memRecs=0x%x)\n", handle, resProtocolArgs,
            memRecs);

    GT_assert(ti_sdo_fc_ires_sdma_GTMask, memRecs != NULL);
    GT_assert(ti_sdo_fc_ires_sdma_GTMask, resProtocolArgs != NULL);

    memRecs[0].alignment = 4;

    /*
     * IALG_EXTERNAL because we don't care where this memory is allocated
     */
    memRecs[0].space = IALG_ESDATA;

    /*
     * Memory should be persistent.
     */
    memRecs[0].attrs = IALG_PERSIST;

    /*
     * Size of this handle depends on number of Logical Channels requested
     */
    memRecs[0].size = (sizeof(IRES_SDMA_Obj) + sizeof(SDMA_ChannelDescriptor));

    GT_2trace(ti_sdo_fc_ires_sdma_GTMask, GT_4CLASS,
            "_IRES_SDMA_getMemRecs> Requesting memory of size 0x%x, "
            "alignment 0x%x, space IALG_ESDATA, attrs IALG_PERSIST)\n",
            memRecs[0].size, memRecs[0].alignment);

    GT_0trace(ti_sdo_fc_ires_sdma_GTMask, GT_ENTER,
            "_IRES_SDMA_getMemRecs> Exit (status=IRES_OK)\n" );

    return (IRES_OK); /* number of MemRecs */
}

开发者ID:andreimironenko，项目名称:framework-components-dm365，代码行数:40，代码来源:ires_sdma.c

示例19: OsalKfile_close

/*
 * ======== OsalKfile_close ========
 */
Int
OsalKfile_close (OsalKfile_Handle * fileHandle)
{
    Int                 status      = OSALKFILE_SUCCESS;
    OsalKfile_Object *  fileObject  = NULL;
    mm_segment_t        fs;

    GT_1trace (curTrace, GT_ENTER, "OsalKfile_close", fileHandle);

    GT_assert (curTrace, (fileHandle != NULL));

#if !defined(SYSLINK_BUILD_OPTIMIZE)
    if (fileHandle == NULL) {
        /*! @retval OSALKFILE_E_INVALIDARG NULL provided for argument
                                           fileHandle. */
        status = OSALKFILE_E_INVALIDARG;
        GT_setFailureReason (curTrace,
                             GT_4CLASS,
                             "OsalKfile_close",
                             status,
                             "NULL provided for argument fileHandle");
    }
    else if (*fileHandle == NULL) {
        /*! @retval OSALKFILE_E_HANDLE NULL file handle provided. */
        status = OSALKFILE_E_HANDLE;
        GT_setFailureReason (curTrace,
                             GT_4CLASS,
                             "OsalKfile_close",
                             status,
                             "NULL file handle provided.");
    }
    else {
#endif /* #if !defined(SYSLINK_BUILD_OPTIMIZE) */
        fileObject = (OsalKfile_Object *) *fileHandle;
        fs = get_fs();
        set_fs (KERNEL_DS);
        filp_close (fileObject->fileDesc, NULL);
        set_fs (fs);
        Memory_free (NULL, fileObject, sizeof(OsalKfile_Object));

        /* Reset user's file handle pointer. */
        *fileHandle = NULL;
#if !defined(SYSLINK_BUILD_OPTIMIZE)
    }
#endif /* #if !defined(SYSLINK_BUILD_OPTIMIZE) */

    GT_1trace (curTrace, GT_LEAVE, "OsalKfile_close", status);

    /*! @retval OSALKFILE_SUCCESS Operation successfully completed. */
    return status;
}

开发者ID:andreimironenko，项目名称:syslink，代码行数:54，代码来源:OsalKfile.c

示例20: OsalSemaphore_delete

/*!
 *  @brief      Deletes an instance of Semaphore object.
 *
 *  @param      mutexHandle   Semaphore object handle which needs to be deleted.
 *
 *  @sa         OsalSemaphore_create
 */
Int
OsalSemaphore_delete(OsalSemaphore_Handle *semHandle)
{
    Int status = OSALSEMAPHORE_SUCCESS;
    OsalSemaphore_Object **semObj = (OsalSemaphore_Object **)semHandle;
    int osStatus = 0;

    GT_1trace (curTrace, GT_ENTER, "OsalSemaphore_delete", semHandle);

    GT_assert (curTrace, (semHandle != NULL));

#if !defined(SYSLINK_BUILD_OPTIMIZE)
    if (semHandle == NULL) {
        status = OSALSEMAPHORE_E_INVALIDARG;
        GT_setFailureReason (curTrace,
                             GT_4CLASS,
                             "OsalSemaphore_delete",
                             status,
                             "NULL provided for argument semHandle");
    }
    else if (*semHandle == NULL) {
        status = OSALSEMAPHORE_E_HANDLE;
        GT_setFailureReason (curTrace,
                             GT_4CLASS,
                             "OsalSemaphore_delete",
                             status,
                             "NULL Semaphore handle provided.");
    }
    else {
#endif /* #if !defined(SYSLINK_BUILD_OPTIMIZE) */
            osStatus = sem_destroy(&((*semObj)->lock));
#if !defined(SYSLINK_BUILD_OPTIMIZE)
            if (osStatus < 0) {
                   status = OSALSEMAPHORE_E_HANDLE;
                GT_setFailureReason (curTrace,
                            GT_4CLASS,
                            "OsalSemaphore_delete",
                            status,
                            "Failed to destroy semaphore");
               }
#endif /* #if !defined(SYSLINK_BUILD_OPTIMIZE) */
        Memory_free(NULL, *semHandle, sizeof (OsalSemaphore_Object));
        *semHandle = NULL;
#if !defined(SYSLINK_BUILD_OPTIMIZE)
    }
#endif /* #if !defined(SYSLINK_BUILD_OPTIMIZE) */

    GT_1trace (curTrace, GT_LEAVE, "OsalSemaphore_delete", status);

    return status;
}

开发者ID:ZIViTi，项目名称:android_hardware_ti_omap4，代码行数:58，代码来源:OsalSemaphore.c

注：本文中的GT_assert函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ GT_setFailureReason函数代码示例发布时间：2022-05-30

C++ GT_READ函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19188|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9988|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8326|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8695|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8639|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9657|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8624|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7998|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8656|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7535|2022-11-06

客服电话

电子邮件

C++ GT_assert函数代码示例

示例1: syslink_frameq_close

示例2: _ACPY3_init

示例3: unmarshallMsg

示例4: ACPY3_wait

示例5: FrameQ_getFrameBufDataStartOffset

示例6: Omap3530IpcInt_waitClearInterrupt

示例7: syslink_frameq_destroy

示例8: syslink_messageq_destroy

示例9: syslink_sharedregion_detach

示例10: ACPY3_fastConfigure32b

示例11: FrameQ_getFrameBufValidSize

示例12: syslink_sharedregion_start

示例13: syslink_sharedregion_setup

示例14: IRES_MEMTCM_getMemRecs

示例15: syslink_frameq_setup

示例16: processWait

示例17: syslink_heapbufmp_destroy

示例18: IRES_SDMA_getMemRecs

示例19: OsalKfile_close

示例20: OsalSemaphore_delete

请发表评论

全部评论

上一篇：

下一篇：

dustinvtran/ml-videos: A collection of v

DELPHI根据进程名强制关闭进程

ravikumar001/maven

更的笔顺,体会更的笔画,理会更的部首

ceejbot/LOUDBOT: AUTOMATED SHOUTING FOR

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053