C++ GT_LPORT_2_PORT函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中GT_LPORT_2_PORT函数的典型用法代码示例。如果您正苦于以下问题：C++ GT_LPORT_2_PORT函数的具体用法？C++ GT_LPORT_2_PORT怎么用？C++ GT_LPORT_2_PORT使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了GT_LPORT_2_PORT函数的13个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: DBG_INFO

/*******************************************************************************
* gvlnSetPortUserPriLsb
*
* DESCRIPTION:
*       This routine Set the user priority (VPT) LSB bit, to be added to the
*       user priority on the egress.
*
* INPUTS:
*       port       - logical port number to set.
*       userPriLsb - GT_TRUE for 1, GT_FALSE for 0.
*
* OUTPUTS:
*       None.
*
* RETURNS:
*       GT_OK               - on success
*       GT_FAIL             - on error
*       GT_BAD_PARAM        - on bad parameters
*
* COMMENTS:
*
* GalTis:
*
*******************************************************************************/
GT_STATUS gvlnSetPortUserPriLsb
(
    IN GT_QD_DEV *dev,
    IN GT_LPORT  port,
    IN GT_BOOL   userPriLsb
)
{
    GT_STATUS       retVal;         /* Functions return value.      */
    GT_U16          data;           /* Data to be set into the      */
                                    /* register.                    */
    GT_U8           phyPort;        /* Physical port.               */

    DBG_INFO(("gvlnSetPortUserPriLsb Called.\n"));

    /* Gigabit Switch does not support this status. */
    if ((IS_IN_DEV_GROUP(dev,DEV_GIGABIT_SWITCH)) ||
        (IS_IN_DEV_GROUP(dev,DEV_ENHANCED_FE_SWITCH)) ||
        (IS_IN_DEV_GROUP(dev,DEV_FE_AVB_FAMILY)))
    {
        DBG_INFO(("GT_NOT_SUPPORTED\n"));
        return GT_NOT_SUPPORTED;
    }

    phyPort = GT_LPORT_2_PORT(port);
    BOOL_2_BIT(userPriLsb,data);

    retVal = hwSetPortRegField(dev,phyPort,QD_REG_PVID,13,1,data);
    if(retVal != GT_OK)
    {
        DBG_INFO(("Failed.\n"));
        return retVal;
    }
    DBG_INFO(("OK.\n"));
    return GT_OK;
}

开发者ID:leejefy，项目名称:F407_FC90，代码行数:59，代码来源:gtBrgVlan.c

示例2: DBG_INFO

/*******************************************************************************
* gstpSetPortState
*
* DESCRIPTION:
*       This routine set the port state.
*
* INPUTS:
*       port  - the logical port number.
*       state - the port state to set.
*
* OUTPUTS:
*       None.
*
* RETURNS:
*       GT_OK   - on success
*       GT_FAIL - on error
*
* COMMENTS:
*
*
* GalTis:
*
*******************************************************************************/
GT_STATUS gstpSetPortState
(
    IN GT_QD_DEV *dev,
    IN GT_LPORT           port,
    IN GT_PORT_STP_STATE  state
)
{
    GT_U8           phyPort;        /* Physical port                */
    GT_U16          data;           /* Data to write to register.   */
    GT_STATUS       retVal;         /* Functions return value.      */

    DBG_INFO(("gstpSetPortState Called.\n"));

    phyPort = GT_LPORT_2_PORT(port);
    data    = state;

    /* Set the port state bits.             */
    retVal= hwSetPortRegField(dev,phyPort, QD_REG_PORT_CONTROL,0,2,data);
    if(retVal != GT_OK)
    {
        DBG_INFO(("Failed.\n"));
        return retVal;
    }
    DBG_INFO(("OK.\n"));
    return GT_OK;
}

开发者ID:ingmar-k，项目名称:Buffalo-Linkstation-Kirkwood-Kernel，代码行数:49，代码来源:gtBrgStp.c

示例3: DBG_INFO

/*******************************************************************************
* gpavSetIngressMonitor
*
* DESCRIPTION:
*       This routine sets the Ingress Monitor bit in the PAV.
*
* INPUTS:
*       port - the logical port number.
*       mode - the ingress monitor bit in the PAV
*              GT_FALSE: Ingress Monitor enabled
*              GT_TRUE:  Ingress Monitor disabled
* OUTPUTS:
*       None.
*
* RETURNS:
*       GT_OK   - on success
*       GT_FAIL - on error
*
* COMMENTS:
*
*
* GalTis:
*
*******************************************************************************/
GT_STATUS gpavSetIngressMonitor
(
    IN GT_QD_DEV *dev,
    IN GT_LPORT  port,
    IN GT_BOOL   mode
)
{
    GT_STATUS       retVal;         /* Functions return value.      */
    GT_U16          data;           /* Data to be set into the      */
    /* register.                    */
    GT_U8           phyPort;        /* Physical port.               */

    DBG_INFO(("gpavSetIngressMonitorCalled.\n"));

    phyPort = GT_LPORT_2_PORT(port);
    BOOL_2_BIT(mode,data);

    /* check if device supports this feature */
    if (!IS_IN_DEV_GROUP(dev,DEV_ENABLE_MONITORING))
    {
        DBG_INFO(("GT_NOT_SUPPORTED\n"));
        return GT_NOT_SUPPORTED;
    }

    retVal = hwSetPortRegField(dev,phyPort,QD_REG_PORT_ASSOCIATION,15,1,data);
    if(retVal != GT_OK)
    {
        DBG_INFO(("Failed.\n"));
        return retVal;
    }

    DBG_INFO(("OK.\n"));
    return GT_OK;
}

开发者ID:ashang，项目名称:xpenology-3.x，代码行数:58，代码来源:gtPortPav.c

示例4: DBG_INFO

/*******************************************************************************
* gstatsFlushPort
*
* DESCRIPTION:
*       Flush All counters for a given port.
*
* INPUTS:
*       port - the logical port number.
*
* OUTPUTS:
*       None.
*
* RETURNS:
*       GT_OK      - on success
*       GT_FAIL    - on error
*
* COMMENTS:
*       None
*
* GalTis:
*
*******************************************************************************/
GT_STATUS gstatsFlushPort
(
    IN GT_QD_DEV  *dev,
    IN GT_LPORT      port
)
{
    GT_STATUS    retVal;
    GT_U8        hwPort;         /* physical port number         */

    DBG_INFO(("gstatsFlushPort Called.\n"));

    /* translate logical port to physical port */
    hwPort = GT_LPORT_2_PORT(port);

    /* check if device supports this feature */
    if((retVal = IS_VALID_API_CALL(dev,hwPort, DEV_RMON)) != GT_OK)
    {
        return retVal;
    }

    retVal = statsOperationPerform(dev,STATS_FLUSH_PORT,hwPort,0,NULL);
    if(retVal != GT_OK)
    {
        DBG_INFO(("Failed (statsOperationPerform returned GT_FAIL).\n"));
        return retVal;
    }

    DBG_INFO(("OK.\n"));
    return GT_OK;

}

开发者ID:HuxyUK，项目名称:xpenology-3.x，代码行数:53，代码来源:gtPortRmon.c

示例5: DBG_INFO

/*******************************************************************************
* gprtGetPortCtr
*
* DESCRIPTION:
*       This routine gets the port rx/tx counters.
*
* INPUTS:
*       port  - the logical port number.
*
* OUTPUTS:
*       ctr - the counters value.
*
* RETURNS:
*       GT_OK   - on success
*       GT_FAIL - on error
*
* COMMENTS:
*
*
* GalTis:
*
*******************************************************************************/
GT_STATUS gprtGetPortCtr
(
    IN  GT_QD_DEV       *dev,
    IN  GT_LPORT        port,
    OUT GT_PORT_STAT    *ctr
)
{
    GT_U16          count;          /* counters current value       */
    GT_U8           hwPort;         /* physical port number         */

    DBG_INFO(("gprtGetPortCtr Called.\n"));

    if (IS_IN_DEV_GROUP(dev,DEV_88E6093_FAMILY))
    {
        DBG_INFO(("GT_NOT_SUPPORTED\n"));
        return GT_NOT_SUPPORTED;
    }

    if(ctr  == NULL)
    {
        DBG_INFO(("Failed.\n"));
        return GT_BAD_PARAM;
    }
    /* translate logical port to physical port */
    hwPort = GT_LPORT_2_PORT(port);

    /* get rx counter value  */
    if(hwReadPortReg(dev,hwPort, QD_REG_RX_COUNTER, &count) != GT_OK)
    {
        DBG_INFO(("Failed (Read Rx).\n"));
        return GT_FAIL;
    }
    ctr->rxCtr = count;
    /* get tx counter value  */
    if(hwReadPortReg(dev,hwPort, QD_REG_TX_COUNTER, &count) != GT_OK)
    {
        DBG_INFO(("Failed (Read Tx).\n"));
        return GT_FAIL;
    }
    ctr->txCtr = count;

    if (IS_IN_DEV_GROUP(dev,DEV_ENHANCED_FE_SWITCH))
    {
        /* get dropped counter value  */
        if(hwReadPortReg(dev,hwPort, QD_REG_DROPPED_COUNTER, &count) != GT_OK)
        {
            DBG_INFO(("Failed (Read Tx).\n"));
            return GT_FAIL;
        }
        ctr->dropped = count;
    }
    else
        ctr->dropped = 0;

    DBG_INFO(("OK.\n"));
    return GT_OK;
}

开发者ID:Undrizzle，项目名称:apps，代码行数:79，代码来源:gtPortStat.c

示例6: DBG_INFO

/*******************************************************************************
* gpcsSetPCSAnEn
*
* DESCRIPTION:
*		This routine sets Enable mode of PCS Inband Auto-Negotiation.
*
* INPUTS:
*		port - the logical port number.
*		mode - GT_TRUE to enable PCS AN mode or GT_FALSE otherwise
*
* OUTPUTS:
*		None
*
* RETURNS:
*		GT_OK   - on success
*		GT_FAIL - on error
*		GT_NOT_SUPPORTED - if current device does not support this feature.
*		
* COMMENTS:
*
* GalTis:
*
*******************************************************************************/
GT_STATUS gpcsSetPCSAnEn
(
	IN GT_QD_DEV	*dev,
	IN GT_LPORT 	port,
	IN GT_BOOL  	mode
)
{
    GT_U16          data;           /* Used to poll the SWReset bit */
    GT_STATUS       retVal;         /* Functions return value.      */
    GT_U8           hwPort;         /* the physical port number     */

    DBG_INFO(("gpcsSetPCSAnEn Called.\n"));

	/* check if the given Switch supports this feature. */
	if (!IS_IN_DEV_GROUP(dev,DEV_PCS))
    {
        DBG_INFO(("GT_NOT_SUPPORTED\n"));
		return GT_NOT_SUPPORTED;
    }

    /* translate BOOL to binary */
    BOOL_2_BIT(mode, data);

    /* translate LPORT to hardware port */
    hwPort = GT_LPORT_2_PORT(port);

	/* check if the given port supports PCS */
	if (!DOES_DEVPORT_SUPPORT_PCS(dev,hwPort))
    {
        if (!IS_IN_DEV_GROUP(dev, DEV_INTERNAL_GPHY))
        {
            DBG_INFO(("GT_NOT_SUPPORTED\n"));
	    	return GT_NOT_SUPPORTED;
        }

        if ((hwPort < 4) || (hwPort > 7))
        {
            DBG_INFO(("GT_NOT_SUPPORTED\n"));
	    	return GT_NOT_SUPPORTED;
        }
    }

    /* Get the PCSAnEn bit.  */
    retVal = hwSetPortRegField(dev,hwPort, QD_REG_PCS_CONTROL,10,1,data);

    if(retVal != GT_OK)
	{
        DBG_INFO(("Failed.\n"));
	}
    else
	{
        DBG_INFO(("OK.\n"));
	}
    /* return */
    return retVal;
}

开发者ID:KevinCabana，项目名称:xpenology，代码行数:79，代码来源:gtPCSCtrl.c

示例7: _getSerdesPageNumber

/*******************************************************************************
* gprtGetSerdesMode
*
* DESCRIPTION:
*       This routine reads Serdes Interface Mode.
*
* INPUTS:
*        port -  The physical SERDES device address(4/5)
*
* OUTPUTS:
*       mode    - Serdes Interface Mode
*
* RETURNS:
*       GT_OK           - on success
*       GT_FAIL         - on error
*
* COMMENTS:
*       logical port number is supported only for the devices made production 
*       before 2009. 
*  (Serdes devices: 88E6131, 88E6122, 88E6108, 88E6161, 88E6165, 88E6352 and 88E320 family)
*
*******************************************************************************/
GT_STATUS gprtGetSerdesMode
(
    IN  GT_QD_DEV    *dev,
    IN  GT_LPORT     port,
    IN  GT_SERDES_MODE *mode
)
{
    GT_U16          u16Data;           /* The register's read data.    */
    GT_U8           hwPort,  serdesPort;         /* the physical port number     */
	  GT_U8           pageNum = _getSerdesPageNumber(dev);
    GT_PHY_INFO        serdesInfo;


    DBG_INFO(("gprtGetSerdesMode Called.\n"));

    if(!IS_IN_DEV_GROUP(dev,DEV_SERDES_CORE))
    {
        return GT_NOT_SUPPORTED;
    }

    /* check if input is logical port number */    
    hwPort = GT_LPORT_2_PORT(port);
	serdesPort = hwPort;
    GT_GET_SERDES_PORT(dev,&serdesPort);



    gtSemTake(dev,dev->phyRegsSem,OS_WAIT_FOREVER);
    /* check if the port is configurable */
    if((serdesInfo.phyId=GT_GET_PHY_ID(dev,hwPort)) == GT_INVALID_PHY)
    {
        gtSemGive(dev,dev->phyRegsSem);
        return GT_NOT_SUPPORTED;
    }

    if(driverFindPhyInformation(dev,hwPort,&serdesInfo) != GT_OK)
    {
        DBG_INFO(("Unknown PHY device.\n"));
        gtSemGive(dev,dev->phyRegsSem);
        return GT_FAIL;
    }


    /* Get Serdes Register. */
    if(hwReadPagedPhyReg(dev,serdesPort,pageNum, 16,serdesInfo.anyPage,&u16Data) != GT_OK)
    {
        DBG_INFO(("Failed.\n"));
        gtSemGive(dev,dev->phyRegsSem);
        return GT_FAIL;
    }

    *mode = u16Data&0x3;

    gtSemGive(dev,dev->phyRegsSem);
    return GT_OK;
}

开发者ID:leejefy，项目名称:F407_FC90，代码行数:78，代码来源:gtSerdesCtrl.c

示例8: DBG_INFO

/*******************************************************************************
* gstuFindSidEntry
*
* DESCRIPTION:
*       Find STU entry for a specific SID, it will return the entry, if found, 
*       along with its associated data 
*
* INPUTS:
*       stuEntry - contains the SID to searche for 
*
* OUTPUTS:
*       found    - GT_TRUE, if the appropriate entry exists.
*       stuEntry - the entry parameters.
*
* RETURNS:
*       GT_OK      - on success.
*       GT_FAIL    - on error or entry does not exist.
*       GT_NO_SUCH - no such entry.
*		GT_NOT_SUPPORTED - if current device does not support this feature.
*
* COMMENTS:
*		Valid SID is 1 ~ 63.
*
*******************************************************************************/
GT_STATUS gstuFindSidEntry
(
    IN  GT_QD_DEV       *dev,
    INOUT GT_STU_ENTRY  *stuEntry,
    OUT GT_BOOL         *found
)
{
    GT_U8               valid;
    GT_STATUS       	retVal;
    GT_U8               port;
    GT_LPORT            lport;
    GT_STU_ENTRY    	entry;

    DBG_INFO(("gstuFindSidEntry Called.\n"));

    /* check if device supports this feature */
	if (!IS_IN_DEV_GROUP(dev,DEV_802_1S_STU))
    {
        DBG_INFO(("GT_NOT_SUPPORTED\n"));
		return GT_NOT_SUPPORTED;
    }

    if((stuEntry->sid == 0) || (stuEntry->sid > 0x3F))
	{
        DBG_INFO(("GT_BAD_PARAM\n"));
		return GT_BAD_PARAM;
	}

    *found = GT_FALSE;

    /* Decrement 1 from sid */
    entry.sid   = stuEntry->sid-1;
    valid = 0; /* valid is not used as input in this operation */

    retVal = stuOperationPerform(dev,GET_NEXT_STU_ENTRY,&valid, &entry);
    if(retVal != GT_OK)
    {
        DBG_INFO(("Failed (stuOperationPerform returned GT_FAIL).\n"));
        return retVal;
    }

    /* retrive the value from the operation */ 
    if ((entry.sid != stuEntry->sid) | (valid == 0))
		return GT_NO_SUCH;

    for(lport=0; lport<dev->numOfPorts; lport++)
    {
		port = GT_LPORT_2_PORT(lport);
		stuEntry->portState[lport]=entry.portState[port];
    }

    *found = GT_TRUE;

    DBG_INFO(("OK.\n"));
    return GT_OK;
}

开发者ID:KevinCabana，项目名称:xpenology，代码行数:80，代码来源:gtBrgStu.c

示例9: DBG_INFO

/*******************************************************************************
* gsysInitCPUPort
*
* DESCRIPTION:
*       This routine initializes CPU Port to required values. It is requred for Opus
*
* INPUTS:
*       cpuPort - CPU Port
*
* OUTPUTS:
*       None.
*
* RETURNS:
*       GT_OK   - on success
*       GT_FAIL - on error
*        GT_NOT_SUPPORTED - if current device does not support this feature.
*
* COMMENTS:
*       None.
*
*******************************************************************************/
static GT_STATUS gsysInitCPUPort
(
    IN  GT_QD_DEV *dev,
    IN  GT_LPORT  cpuPort
)
{
    GT_STATUS       retVal;         /* Functions return value.      */
    GT_U8           hwPort;         /* the physical port number     */

    DBG_INFO(("gsysInitCPUPort Called.\n"));

    /* translate LPORT to hardware port */
    hwPort = GT_LPORT_2_PORT(cpuPort);

    if (!IS_IN_DEV_GROUP(dev,DEV_CPU_PORT_NEED_INIT))
    {
        DBG_INFO(("GT_NOT_SUPPORTED\n"));
        return GT_NOT_SUPPORTED;
    }

    if (cpuPort >= dev->numOfPorts)
    {
        return GT_BAD_PARAM;
    }

    /* Initialize the CPU Port.            */

    retVal = hwSetPortRegField(dev,hwPort, QD_REG_PORT_CONTROL, 11, 1, 1);
    if(retVal != GT_OK)
    {
        DBG_INFO(("Failed.\n"));
        return retVal;
    }
    retVal = hwSetPortRegField(dev,hwPort, QD_REG_PORT_CONTROL, 8, 2, 3);
    if(retVal != GT_OK)
    {
        DBG_INFO(("Failed.\n"));
        return retVal;
    }
    retVal = hwSetPortRegField(dev,hwPort, QD_REG_PORT_VLAN_MAP, 0, 10, 0x7ff);
    if(retVal != GT_OK)
    {
        DBG_INFO(("Failed.\n"));
        return retVal;
    }
    retVal = hwSetPortRegField(dev,hwPort, QD_REG_PORT_CONTROL2, 10, 4, 0);
    if(retVal != GT_OK)
    {
        DBG_INFO(("Failed.\n"));
        return retVal;
    }

    DBG_INFO(("OK.\n"));
    return GT_OK;
}

开发者ID:leejefy，项目名称:F407_FC90，代码行数:76，代码来源:gtSysConfig.c

示例10: gprtGetPhyIntPortSummary_mad

GT_STATUS gprtGetPhyIntPortSummary
(
IN  GT_QD_DEV  *dev,
OUT GT_U16     *intPortMask
)
{
    GT_STATUS       retVal;      
    GT_U8           hwPort;         /* the physical port number     */
    GT_U16            portVec;

#ifdef GT_USE_MAD
    if (dev->use_mad==GT_TRUE)
        return gprtGetPhyIntPortSummary_mad(dev, intPortMask);
#endif

    DBG_INFO(("gprtGetPhyIntPortSummary Called.\n"));
   
    /* translate LPORT 0 to hardware port */
    hwPort = GT_LPORT_2_PORT(0);

    *intPortMask=0;

    if (IS_IN_DEV_GROUP(dev,DEV_DEV_PHY_INTERRUPT))
    {
        return GT_NOT_SUPPORTED;
    }

    if (IS_IN_DEV_GROUP(dev,DEV_INTERNAL_GPHY))
    {
        /* get the interrupt port summary from global register */
        retVal = hwGetGlobal2RegField(dev,QD_REG_PHYINT_SOURCE,0,dev->maxPorts,&portVec);
        GT_GIG_PHY_INT_MASK(dev,portVec);
        *intPortMask = (GT_U16)GT_PORTVEC_2_LPORTVEC(portVec);
    }
    else
    {
        /* get the interrupt port summary from phy */
        retVal = hwReadPhyReg(dev,hwPort, QD_PHY_INT_PORT_SUMMARY_REG, &portVec);
        *intPortMask = (GT_U16)GT_PORTVEC_2_LPORTVEC(portVec);
    }

    if(retVal != GT_OK)
    {
        DBG_INFO(("Failed.\n"));
    }
    else
    {
        DBG_INFO(("OK.\n"));
    }

    return retVal;

}

开发者ID:sevennothing，项目名称:lros，代码行数:53，代码来源:gtPhyInt.c

示例11: DBG_INFO

/*******************************************************************************
* gprtSetPortDuplexMode
*
* DESCRIPTION:
* Sets duplex mode for a specific logical port. This function will keep the speed
* and loopback mode to the previous value, but disable others, such as Autonegotiation.
*
* INPUTS:
* port - logical port number
* dMode - dulpex mode
*
* OUTPUTS:
* None.
*
* RETURNS:
* GT_OK - on success
* GT_FAIL - on error
*
* COMMENTS:
* data sheet register 0.8 - Duplex Mode
*
*******************************************************************************/
GT_STATUS gprtSetPortDuplexMode
(
IN GT_QD_DEV *dev,
IN GT_LPORT  port,
IN GT_BOOL   dMode
)
{
    GT_STATUS       retVal;         /* Functions return value.      */
    GT_U8           hwPort;         /* the physical port number     */
    GT_U16 			u16Data;

    DBG_INFO(("gprtSetPortDuplexMode Called.\n"));
    
    /* translate LPORT to hardware port */
    hwPort = GT_LPORT_2_PORT(port);

	/* check if the port is configurable */
	if(!IS_CONFIGURABLE_PHY(dev,hwPort))
	{
		return GT_NOT_SUPPORTED;
	}

    if(hwReadPhyReg(dev,hwPort,QD_PHY_CONTROL_REG,&u16Data) != GT_OK)
	{
        DBG_INFO(("Not able to read Phy Reg(port:%d,offset:%d).\n",hwPort,QD_PHY_CONTROL_REG));
        return GT_FAIL;
	}

	if(dMode)
	{
		u16Data = QD_PHY_RESET | (u16Data & (QD_PHY_LOOPBACK | QD_PHY_SPEED)) | QD_PHY_DUPLEX;
	}
	else
	{
		u16Data = QD_PHY_RESET | (u16Data & (QD_PHY_LOOPBACK | QD_PHY_SPEED));
	}


    DBG_INFO(("Write to phy(%d) register: regAddr 0x%x, data %#x",
              hwPort,QD_PHY_CONTROL_REG,u16Data));

    /* Write to Phy Control Register.  */
    retVal = hwWritePhyReg(dev,hwPort,QD_PHY_CONTROL_REG,u16Data);
    if(retVal != GT_OK)
        DBG_INFO(("Failed.\n"));
    else
        DBG_INFO(("OK.\n"));
    return retVal;
}

开发者ID:BackupTheBerlios，项目名称:wl530g-svn，代码行数:71，代码来源:gtPhyCtrl.c

示例12: GT_LPORT_2_PORT

/*******************************************************************************
* lport2phy
*
* DESCRIPTION:
*       This function converts logical port number to physical phy number.
*
* INPUTS:
*		portVec - physical port list in vector
*		port    - logical port number
* OUTPUTS:
*		None.
* RETURNS:
*       physical port number
*
* COMMENTS:
*
*******************************************************************************/
GT_U8 lport2phy
(
    IN GT_QD_DEV    *dev,
	IN GT_LPORT	 port
)
{
    GT_U8	hwPort;

	/* check if it's for SERDES */
	if(dev->validSerdesVec & (1<<port))
	{
		hwPort = (GT_U8)port;
	}
	else
	{
		hwPort = GT_LPORT_2_PORT(port);
	}

	return hwPort;
}

开发者ID:HuxyUK，项目名称:xpenology-3.x，代码行数:37，代码来源:gtDrvConfig.c

示例13: DBG_INFO

/*******************************************************************************
* gpavGetIngressMonitor
*
* DESCRIPTION:
*       This routine gets the Ingress Monitor bit in the PAV.
*
* INPUTS:
*       port - the logical port number.
*       
* OUTPUTS:
*       mode - the ingress monitor bit in the PAV
*              GT_FALSE: Ingress Monitor enabled 
*              GT_TRUE:  Ingress Monitor disabled 
*
* RETURNS:
*       GT_OK               - on success
*       GT_FAIL             - on error
*       GT_BAD_PARAM        - on bad parameters
*
* COMMENTS:
*
*
* GalTis:
*
*******************************************************************************/
GT_STATUS gpavGetIngressMonitor
(
    IN GT_QD_DEV *dev,
    IN  GT_LPORT port,
    OUT GT_BOOL  *mode
)
{
    GT_STATUS       retVal;         /* Functions return value.      */
    GT_U16          data;           /* The register's read data.    */
    GT_U8           phyPort;        /* Physical port.               */

    DBG_INFO(("grcGetIngressMonitor Called.\n"));
    if(mode == NULL)
    {
        DBG_INFO(("Failed.\n"));
        return GT_BAD_PARAM;
    }

    phyPort = GT_LPORT_2_PORT(port);

    /* check if device supports this feature */
    if((retVal = IS_VALID_API_CALL(dev,phyPort, DEV_PORT_MONITORING)) != GT_OK ) 
      return retVal;
	
	if (!IS_IN_DEV_GROUP(dev,DEV_ENABLE_MONITORING))
    {
        DBG_INFO(("GT_NOT_SUPPORTED\n"));
		return GT_NOT_SUPPORTED;
    }

    retVal = hwGetPortRegField(dev,phyPort,QD_REG_PORT_ASSOCIATION,15,1,&data);
    if(retVal != GT_OK)
    {
        DBG_INFO(("Failed.\n"));
        return retVal;
    }

    BIT_2_BOOL(data,*mode);
    DBG_INFO(("OK.\n"));
    return GT_OK;
}

开发者ID:cryptofroot，项目名称:lsql_linux-2.6.22.7，代码行数:66，代码来源:gtPortPav.c

注：本文中的GT_LPORT_2_PORT函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ GT_READ函数代码示例发布时间：2022-05-30

C++ GT_ASSERT函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19189|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9988|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8326|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8696|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8639|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9657|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8624|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7998|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8656|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7535|2022-11-06

客服电话

电子邮件

C++ GT_LPORT_2_PORT函数代码示例

示例1: DBG_INFO

示例2: DBG_INFO

示例3: DBG_INFO

示例4: DBG_INFO

示例5: DBG_INFO

示例6: DBG_INFO

示例7: _getSerdesPageNumber

示例8: DBG_INFO

示例9: DBG_INFO

示例10: gprtGetPhyIntPortSummary_mad

示例11: DBG_INFO

示例12: GT_LPORT_2_PORT

示例13: DBG_INFO

请发表评论

全部评论

上一篇：

下一篇：

CVE-2022-2115

dustinvtran/ml-videos: A collection of v

ravikumar001/maven

更的笔顺,体会更的笔画,理会更的部首

ceejbot/LOUDBOT: AUTOMATED SHOUTING FOR

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053