• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号

C++ FT_STREAM_READ函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中FT_STREAM_READ函数的典型用法代码示例。如果您正苦于以下问题:C++ FT_STREAM_READ函数的具体用法?C++ FT_STREAM_READ怎么用?C++ FT_STREAM_READ使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了FT_STREAM_READ函数的18个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: cff_index_read_offset

  /* read an offset from the index's stream current position */
  static FT_ULong
  cff_index_read_offset( CFF_Index  idx,
                         FT_Error  *errorp )
  {
    FT_Error   error;
    FT_Stream  stream = idx->stream;
    FT_Byte    tmp[4];
    FT_ULong   result = 0;


    if ( !FT_STREAM_READ( tmp, idx->off_size ) )
    {
      FT_Int  nn;


      for ( nn = 0; nn < idx->off_size; nn++ )
        result = ( result << 8 ) | tmp[nn];
    }

    *errorp = error;
    return result;
  }
开发者ID:DjinCN,项目名称:libFreeType2,代码行数:23,代码来源:cffload.c


示例2: ft_bzip2_check_header

  /* check and skip .bz2 header - we don't support `transparent' compression */
  static FT_Error
  ft_bzip2_check_header( FT_Stream  stream )
  {
    FT_Error  error = FT_Err_Ok;
    FT_Byte   head[4];


    if ( FT_STREAM_SEEK( 0 )       ||
         FT_STREAM_READ( head, 4 ) )
      goto Exit;

    /* head[0] && head[1] are the magic numbers;    */
    /* head[2] is the version, and head[3] the blocksize */
    if ( head[0] != 0x42  ||
         head[1] != 0x5a  ||
         head[2] != 0x68  )  /* only support bzip2 (huffman) */
    {
      error = FT_THROW( Invalid_File_Format );
      goto Exit;
    }

  Exit:
    return error;
  }
开发者ID:03050903,项目名称:Urho3D,代码行数:25,代码来源:ftbzip2.c


示例3: tt_face_get_name


//.........这里部分代码省略.........
                break;

            case TT_PLATFORM_MICROSOFT:
                /* we only take a non-English name when there is nothing */
                /* else available in the font                            */
                /*                                                       */
                if (found_win == -1 || (rec->languageID & 0x3FF) == 0x009)
                {
                    switch (rec->encodingID)
                    {
                    case TT_MS_ID_SYMBOL_CS:
                    case TT_MS_ID_UNICODE_CS:
                    case TT_MS_ID_UCS_4:
                        is_english = FT_BOOL((rec->languageID & 0x3FF) == 0x009);
                        found_win  = n;
                        break;

                    default:
                        ;
                    }
                }

                break;

            default:
                ;
            }
        }
    }

    found_apple = found_apple_roman;
    if (found_apple_english >= 0)
        found_apple = found_apple_english;

    /* some fonts contain invalid Unicode or Macintosh formatted entries; */
    /* we will thus favor names encoded in Windows formats if available   */
    /* (provided it is an English name)                                   */
    /*                                                                    */
    convert = NULL;
    if (found_win >= 0 && !(found_apple >= 0 && !is_english))
    {
        rec = face->name_table.names + found_win;

        switch (rec->encodingID)
        {
        /* all Unicode strings are encoded using UTF-16BE */
        case TT_MS_ID_UNICODE_CS:
        case TT_MS_ID_SYMBOL_CS:
            convert = tt_name_entry_ascii_from_utf16;
            break;

        case TT_MS_ID_UCS_4:
            /* Apparently, if this value is found in a name table entry, it is */
            /* documented as `full Unicode repertoire'.  Experience with the   */
            /* MsGothic font shipped with Windows Vista shows that this really */
            /* means UTF-16 encoded names (UCS-4 values are only used within   */
            /* charmaps).                                                      */
            convert = tt_name_entry_ascii_from_utf16;
            break;

        default:
            ;
        }
    }
    else if (found_apple >= 0)
    {
        rec     = face->name_table.names + found_apple;
        convert = tt_name_entry_ascii_from_other;
    }
    else if (found_unicode >= 0)
    {
        rec     = face->name_table.names + found_unicode;
        convert = tt_name_entry_ascii_from_utf16;
    }

    if (rec && convert)
    {
        if (rec->string == NULL)
        {
            FT_Stream stream = face->name_table.stream;


            if (FT_QNEW_ARRAY (rec->string, rec->stringLength) ||
                FT_STREAM_SEEK(rec->stringOffset) ||
                FT_STREAM_READ(rec->string, rec->stringLength))
            {
                FT_FREE(rec->string);
                rec->stringLength = 0;
                result            = NULL;
                goto Exit;
            }
        }

        result = convert(rec, memory);
    }

Exit:
    *name = result;
    return error;
}
开发者ID:hyyh619,项目名称:OpenSceneGraph-3.4.0,代码行数:101,代码来源:sfobjs.c


示例4: load_format_25

  static FT_Error
  load_format_25( TT_Face    face,
                  FT_Stream  stream,
                  FT_ULong   post_limit )
  {
    FT_Memory  memory = stream->memory;
    FT_Error   error;

    FT_Int     num_glyphs;
    FT_Char*   offset_table = NULL;

    FT_UNUSED( post_limit );


    /* UNDOCUMENTED!  This value appears only in the Apple TT specs. */
    if ( FT_READ_USHORT( num_glyphs ) )
      goto Exit;

    /* check the number of glyphs */
    if ( num_glyphs > face->max_profile.numGlyphs || num_glyphs > 258 )
    {
      error = FT_THROW( Invalid_File_Format );
      goto Exit;
    }

    if ( FT_NEW_ARRAY( offset_table, num_glyphs )   ||
         FT_STREAM_READ( offset_table, num_glyphs ) )
      goto Fail;

    /* now check the offset table */
    {
      FT_Int  n;


      for ( n = 0; n < num_glyphs; n++ )
      {
        FT_Long  idx = (FT_Long)n + offset_table[n];


        if ( idx < 0 || idx > num_glyphs )
        {
          error = FT_THROW( Invalid_File_Format );
          goto Fail;
        }
      }
    }

    /* OK, set table fields and exit successfully */
    {
      TT_Post_25  table = &face->postscript_names.names.format_25;


      table->num_glyphs = (FT_UShort)num_glyphs;
      table->offsets    = offset_table;
    }

    return FT_Err_Ok;

  Fail:
    FT_FREE( offset_table );

  Exit:
    return error;
  }
开发者ID:hsmith,项目名称:freetype,代码行数:64,代码来源:ttpost.c


示例5: load_format_20


//.........这里部分代码省略.........
      {
        FT_Int  idx;


        idx = glyph_indices[n];
        if ( idx >= 258 )
        {
          idx -= 257;
          if ( idx > num_names )
            num_names = (FT_UShort)idx;
        }
      }
    }

    /* now load the name strings */
    {
      FT_UShort  n;


      if ( FT_NEW_ARRAY( name_strings, num_names ) )
        goto Fail;

      for ( n = 0; n < num_names; n++ )
      {
        FT_UInt  len;


        if ( FT_STREAM_POS() >= post_limit )
          break;
        else
        {
          FT_TRACE6(( "load_format_20: %d byte left in post table\n",
                      post_limit - FT_STREAM_POS() ));

          if ( FT_READ_BYTE( len ) )
            goto Fail1;
        }

        if ( len > post_limit                   ||
             FT_STREAM_POS() > post_limit - len )
        {
          FT_Int  d = (FT_Int)post_limit - (FT_Int)FT_STREAM_POS();


          FT_ERROR(( "load_format_20:"
                     " exceeding string length (%d),"
                     " truncating at end of post table (%d byte left)\n",
                     len, d ));
          len = (FT_UInt)FT_MAX( 0, d );
        }

        if ( FT_NEW_ARRAY( name_strings[n], len + 1 ) ||
             FT_STREAM_READ( name_strings[n], len   ) )
          goto Fail1;

        name_strings[n][len] = '\0';
      }

      if ( n < num_names )
      {
        FT_ERROR(( "load_format_20:"
                   " all entries in post table are already parsed,"
                   " using NULL names for gid %d - %d\n",
                    n, num_names - 1 ));
        for ( ; n < num_names; n++ )
          if ( FT_NEW_ARRAY( name_strings[n], 1 ) )
            goto Fail1;
          else
            name_strings[n][0] = '\0';
      }
    }

    /* all right, set table fields and exit successfully */
    {
      TT_Post_20  table = &face->postscript_names.names.format_20;


      table->num_glyphs    = (FT_UShort)num_glyphs;
      table->num_names     = (FT_UShort)num_names;
      table->glyph_indices = glyph_indices;
      table->glyph_names   = name_strings;
    }
    return FT_Err_Ok;

  Fail1:
    {
      FT_UShort  n;


      for ( n = 0; n < num_names; n++ )
        FT_FREE( name_strings[n] );
    }

  Fail:
    FT_FREE( name_strings );
    FT_FREE( glyph_indices );

  Exit:
    return error;
  }
开发者ID:hsmith,项目名称:freetype,代码行数:101,代码来源:ttpost.c


示例6: tt_face_get_name


//.........这里部分代码省略.........
          /* field only as a last solution when nothing else is        */
          /* available.                                                */
          /*                                                           */
          found_unicode = n;
          break;

        case TT_PLATFORM_MACINTOSH:
          if ( rec->languageID == TT_MAC_LANGID_ENGLISH )
            found_apple = n;

          break;

        case TT_PLATFORM_MICROSOFT:
          /* we only take a non-English name when there is nothing */
          /* else available in the font                            */
          /*                                                       */
          if ( found_win == -1 || ( rec->languageID & 0x3FF ) == 0x009 )
          {
            switch ( rec->encodingID )
            {
            case TT_MS_ID_SYMBOL_CS:
            case TT_MS_ID_UNICODE_CS:
            case TT_MS_ID_UCS_4:
              is_english = FT_BOOL( ( rec->languageID & 0x3FF ) == 0x009 );
              found_win  = n;
              break;

            default:
              ;
            }
          }
          break;

        default:
          ;
        }
      }
    }

    /* some fonts contain invalid Unicode or Macintosh formatted entries; */
    /* we will thus favor names encoded in Windows formats if available   */
    /* (provided it is an English name)                                   */
    /*                                                                    */
    convert = NULL;
    if ( found_win >= 0 && !( found_apple >= 0 && !is_english ) )
    {
      rec = face->name_table.names + found_win;
      switch ( rec->encodingID )
      {
      case TT_MS_ID_UNICODE_CS:
      case TT_MS_ID_SYMBOL_CS:
        convert = tt_name_entry_ascii_from_utf16;
        break;

      case TT_MS_ID_UCS_4:
        convert = tt_name_entry_ascii_from_ucs4;
        break;

      default:
        ;
      }
    }
    else if ( found_apple >= 0 )
    {
      rec     = face->name_table.names + found_apple;
      convert = tt_name_entry_ascii_from_other;
    }
    else if ( found_unicode >= 0 )
    {
      rec     = face->name_table.names + found_unicode;
      convert = tt_name_entry_ascii_from_utf16;
    }

    if ( rec && convert )
    {
      if ( rec->string == NULL )
      {
        FT_Error   error  = SFNT_Err_Ok;
        FT_Stream  stream = face->name_table.stream;

        FT_UNUSED( error );


        if ( FT_QNEW_ARRAY ( rec->string, rec->stringLength ) ||
             FT_STREAM_SEEK( rec->stringOffset )              ||
             FT_STREAM_READ( rec->string, rec->stringLength ) )
        {
          FT_FREE( rec->string );
          rec->stringLength = 0;
          result            = NULL;
          goto Exit;
        }
      }

      result = convert( rec, memory );
    }

  Exit:
    return result;
  }
开发者ID:Bracket-,项目名称:psp-ports,代码行数:101,代码来源:sfobjs.c


示例7: t42_parser_init

  t42_parser_init( T42_Parser     parser,
                   FT_Stream      stream,
                   FT_Memory      memory,
                   PSAux_Service  psaux )
  {
    FT_Error  error = FT_Err_Ok;
    FT_Long   size;


    psaux->ps_parser_funcs->init( &parser->root, 0, 0, memory );

    parser->stream    = stream;
    parser->base_len  = 0;
    parser->base_dict = 0;
    parser->in_memory = 0;

    /*******************************************************************/
    /*                                                                 */
    /* Here a short summary of what is going on:                       */
    /*                                                                 */
    /*   When creating a new Type 42 parser, we try to locate and load */
    /*   the base dictionary, loading the whole font into memory.      */
    /*                                                                 */
    /*   When `loading' the base dictionary, we only set up pointers   */
    /*   in the case of a memory-based stream.  Otherwise, we allocate */
    /*   and load the base dictionary in it.                           */
    /*                                                                 */
    /*   parser->in_memory is set if we have a memory stream.          */
    /*                                                                 */

    if ( FT_STREAM_SEEK( 0L ) ||
         FT_FRAME_ENTER( 17 ) )
      goto Exit;

    if ( ft_memcmp( stream->cursor, "%!PS-TrueTypeFont", 17 ) != 0 )
    {
      FT_TRACE2(( "  not a Type42 font\n" ));
      error = FT_THROW( Unknown_File_Format );
    }

    FT_FRAME_EXIT();

    if ( error || FT_STREAM_SEEK( 0 ) )
      goto Exit;

    size = stream->size;

    /* now, try to load `size' bytes of the `base' dictionary we */
    /* found previously                                          */

    /* if it is a memory-based resource, set up pointers */
    if ( !stream->read )
    {
      parser->base_dict = (FT_Byte*)stream->base + stream->pos;
      parser->base_len  = size;
      parser->in_memory = 1;

      /* check that the `size' field is valid */
      if ( FT_STREAM_SKIP( size ) )
        goto Exit;
    }
    else
    {
      /* read segment in memory */
      if ( FT_ALLOC( parser->base_dict, size )       ||
           FT_STREAM_READ( parser->base_dict, size ) )
        goto Exit;

      parser->base_len = size;
    }

    parser->root.base   = parser->base_dict;
    parser->root.cursor = parser->base_dict;
    parser->root.limit  = parser->root.cursor + parser->base_len;

  Exit:
    if ( error && !parser->in_memory )
      FT_FREE( parser->base_dict );

    return error;
  }
开发者ID:03050903,项目名称:libgdx,代码行数:81,代码来源:t42parse.hpp


示例8: cid_parser_new

  cid_parser_new( CID_Parser*    parser,
                  FT_Stream      stream,
                  FT_Memory      memory,
                  PSAux_Service  psaux )
  {
    FT_Error  error;
    FT_ULong  base_offset, offset, ps_len;
    FT_Byte   *cur, *limit;
    FT_Byte   *arg1, *arg2;


    FT_ZERO( parser );
    psaux->ps_parser_funcs->init( &parser->root, 0, 0, memory );

    parser->stream = stream;

    base_offset = FT_STREAM_POS();

    /* first of all, check the font format in the header */
    if ( FT_FRAME_ENTER( 31 ) )
      goto Exit;

    if ( ft_strncmp( (char *)stream->cursor,
                     "%!PS-Adobe-3.0 Resource-CIDFont", 31 ) )
    {
      FT_TRACE2(( "  not a CID-keyed font\n" ));
      error = FT_THROW( Unknown_File_Format );
    }

    FT_FRAME_EXIT();
    if ( error )
      goto Exit;

  Again:
    /* now, read the rest of the file until we find */
    /* `StartData' or `/sfnts'                      */
    {
      /*
       * The algorithm is as follows (omitting the case with less than 256
       * bytes to fill for simplicity).
       *
       * 1. Fill the buffer with 256 + STARTDATA_LEN bytes.
       *
       * 2. Search for the STARTDATA and SFNTS strings at positions
       *    buffer[0], buffer[1], ...,
       *    buffer[255 + STARTDATA_LEN - SFNTS_LEN].
       *
       * 3. Move the last STARTDATA_LEN bytes to buffer[0].
       *
       * 4. Fill the buffer with 256 bytes, starting at STARTDATA_LEN.
       *
       * 5. Repeat with step 2.
       *
       */
      FT_Byte  buffer[256 + STARTDATA_LEN + 1];

      /* values for the first loop */
      FT_ULong  read_len    = 256 + STARTDATA_LEN;
      FT_ULong  read_offset = 0;
      FT_Byte*  p           = buffer;


      for ( offset = FT_STREAM_POS(); ; offset += 256 )
      {
        FT_ULong  stream_len;


        stream_len = stream->size - FT_STREAM_POS();

        read_len = FT_MIN( read_len, stream_len );
        if ( FT_STREAM_READ( p, read_len ) )
          goto Exit;

        /* ensure that we do not compare with data beyond the buffer */
        p[read_len] = '\0';

        limit = p + read_len - SFNTS_LEN;

        for ( p = buffer; p < limit; p++ )
        {
          if ( p[0] == 'S'                                           &&
               ft_strncmp( (char*)p, STARTDATA, STARTDATA_LEN ) == 0 )
          {
            /* save offset of binary data after `StartData' */
            offset += (FT_ULong)( p - buffer ) + STARTDATA_LEN + 1;
            goto Found;
          }
          else if ( p[1] == 's'                                   &&
                    ft_strncmp( (char*)p, SFNTS, SFNTS_LEN ) == 0 )
          {
            offset += (FT_ULong)( p - buffer ) + SFNTS_LEN + 1;
            goto Found;
          }
        }

        if ( read_offset + read_len < STARTDATA_LEN )
        {
          FT_TRACE2(( "cid_parser_new: no `StartData' keyword found\n" ));
          error = FT_THROW( Invalid_File_Format );
          goto Exit;
//.........这里部分代码省略.........
开发者ID:GWRon,项目名称:pub.mod-NG,代码行数:101,代码来源:cidparse.c


示例9: T1_Get_Private_Dict

  T1_Get_Private_Dict( T1_Parser      parser,
                       PSAux_Service  psaux )
  {
    FT_Stream  stream = parser->stream;
    FT_Memory  memory = parser->root.memory;
    FT_Error   error  = FT_Err_Ok;
    FT_ULong   size;


    if ( parser->in_pfb )
    {
      /* in the case of the PFB format, the private dictionary can be  */
      /* made of several segments.  We thus first read the number of   */
      /* segments to compute the total size of the private dictionary  */
      /* then re-read them into memory.                                */
      FT_Long    start_pos = FT_STREAM_POS();
      FT_UShort  tag;


      parser->private_len = 0;
      for (;;)
      {
        error = read_pfb_tag( stream, &tag, &size );
        if ( error )
          goto Fail;

        if ( tag != 0x8002U )
          break;

        parser->private_len += size;

        if ( FT_STREAM_SKIP( size ) )
          goto Fail;
      }

      /* Check that we have a private dictionary there */
      /* and allocate private dictionary buffer        */
      if ( parser->private_len == 0 )
      {
        FT_ERROR(( "T1_Get_Private_Dict:"
                   " invalid private dictionary section\n" ));
        error = FT_THROW( Invalid_File_Format );
        goto Fail;
      }

      if ( FT_STREAM_SEEK( start_pos )                           ||
           FT_ALLOC( parser->private_dict, parser->private_len ) )
        goto Fail;

      parser->private_len = 0;
      for (;;)
      {
        error = read_pfb_tag( stream, &tag, &size );
        if ( error || tag != 0x8002U )
        {
          error = FT_Err_Ok;
          break;
        }

        if ( FT_STREAM_READ( parser->private_dict + parser->private_len,
                             size ) )
          goto Fail;

        parser->private_len += size;
      }
    }
    else
    {
      /* We have already `loaded' the whole PFA font file into memory; */
      /* if this is a memory resource, allocate a new block to hold    */
      /* the private dict.  Otherwise, simply overwrite into the base  */
      /* dictionary block in the heap.                                 */

      /* first of all, look at the `eexec' keyword */
      FT_Byte*  cur   = parser->base_dict;
      FT_Byte*  limit = cur + parser->base_len;
      FT_Byte   c;


    Again:
      for (;;)
      {
        c = cur[0];
        if ( c == 'e' && cur + 9 < limit )  /* 9 = 5 letters for `eexec' + */
                                            /* whitespace + 4 chars        */
        {
          if ( cur[1] == 'e' &&
               cur[2] == 'x' &&
               cur[3] == 'e' &&
               cur[4] == 'c' )
            break;
        }
        cur++;
        if ( cur >= limit )
        {
          FT_ERROR(( "T1_Get_Private_Dict:"
                     " could not find `eexec' keyword\n" ));
          error = FT_THROW( Invalid_File_Format );
          goto Exit;
        }
//.........这里部分代码省略.........
开发者ID:PrinttingGroup,项目名称:SumatraPDF_SpecialPrint,代码行数:101,代码来源:t1parse.c


示例10: cid_parser_new

  cid_parser_new( CID_Parser*    parser,
                  FT_Stream      stream,
                  FT_Memory      memory,
                  PSAux_Service  psaux )
  {
    FT_Error  error;
    FT_ULong  base_offset, offset, ps_len;
    FT_Byte   buffer[256 + 10];
    FT_Int    buff_len;
    FT_Byte   *cur, *limit;
    FT_Byte   *arg1, *arg2;


    FT_MEM_ZERO( parser, sizeof ( *parser ) );
    psaux->ps_parser_funcs->init( &parser->root, 0, 0, memory );

    parser->stream = stream;

    base_offset = FT_STREAM_POS();

    /* first of all, check the font format in the header */
    if ( FT_FRAME_ENTER( 31 ) )
      goto Exit;

    if ( ft_strncmp( (char *)stream->cursor,
                     "%!PS-Adobe-3.0 Resource-CIDFont", 31 ) )
    {
      FT_TRACE2(( "[not a valid CID-keyed font]\n" ));
      error = CID_Err_Unknown_File_Format;
    }

    FT_FRAME_EXIT();
    if ( error )
      goto Exit;

  Again:
    /* now, read the rest of the file until we find a `StartData' */
    buff_len = 256;
    for (;;)
    {
      FT_Byte*  p;
      FT_ULong  top_position;


      /* fill input buffer */
      limit     = buffer + 256;
      buff_len -= 256;
      if ( buff_len > 0 )
        FT_MEM_MOVE( buffer, limit, buff_len );

      p = buffer + buff_len;

      if ( FT_STREAM_READ( p, 256 + 10 - buff_len ) )
        goto Exit;

      top_position = FT_STREAM_POS() - buff_len;
      buff_len     = 256 + 10;

      /* look for `StartData' */
      for ( p = buffer; p < limit; p++ )
      {
        if ( p[0] == 'S' && ft_strncmp( (char*)p, "StartData", 9 ) == 0 )
        {
          /* save offset of binary data after `StartData' */
          offset = (FT_ULong)( top_position - ( limit - p ) + 10 );
          goto Found;
        }
      }
    }

  Found:
    /* we have found the start of the binary data.  We will now     */
    /* rewind and extract the frame corresponding to the PostScript */
    /* section                                                      */

    ps_len = offset - base_offset;
    if ( FT_STREAM_SEEK( base_offset )                  ||
         FT_FRAME_EXTRACT( ps_len, parser->postscript ) )
      goto Exit;

    parser->data_offset    = offset;
    parser->postscript_len = ps_len;
    parser->root.base      = parser->postscript;
    parser->root.cursor    = parser->postscript;
    parser->root.limit     = parser->root.cursor + ps_len;
    parser->num_dict       = -1;

    /* Finally, we check whether `StartData' was real -- it could be  */
    /* in a comment or string.  We also get its arguments to find out */
    /* whether the data is represented in binary or hex format.       */

    arg1 = parser->root.cursor;
    cid_parser_skip_PS_token( parser );
    cid_parser_skip_spaces  ( parser );
    arg2 = parser->root.cursor;
    cid_parser_skip_PS_token( parser );
    cid_parser_skip_spaces  ( parser );

    limit = parser->root.limit;
    cur   = parser->root.cursor;
//.........这里部分代码省略.........
开发者ID:allanw1,项目名称:Arianrhod,代码行数:101,代码来源:cidparse.c


示例11: cid_parser_new

cid_parser_new( CID_Parser*    parser,
                FT_Stream      stream,
                FT_Memory      memory,
                PSAux_Service  psaux )
{
    FT_Error  error;
    FT_ULong  base_offset, offset, ps_len;
    FT_Byte   *cur, *limit;
    FT_Byte   *arg1, *arg2;


    FT_MEM_ZERO( parser, sizeof ( *parser ) );
    psaux->ps_parser_funcs->init( &parser->root, 0, 0, memory );

    parser->stream = stream;

    base_offset = FT_STREAM_POS();

    /* first of all, check the font format in the header */
    if ( FT_FRAME_ENTER( 31 ) )
        goto Exit;

    if ( ft_strncmp( (char *)stream->cursor,
                     "%!PS-Adobe-3.0 Resource-CIDFont", 31 ) )
    {
        FT_TRACE2(( "  not a CID-keyed font\n" ));
        error = FT_THROW( Unknown_File_Format );
    }

    FT_FRAME_EXIT();
    if ( error )
        goto Exit;

Again:
    /* now, read the rest of the file until we find */
    /* `StartData' or `/sfnts'                      */
    {
        FT_Byte   buffer[256 + 10];
        FT_ULong  read_len = 256 + 10;
        FT_Byte*  p        = buffer;


        for ( offset = FT_STREAM_POS(); ; offset += 256 )
        {
            FT_ULong  stream_len;


            stream_len = stream->size - FT_STREAM_POS();
            if ( stream_len == 0 )
            {
                FT_TRACE2(( "cid_parser_new: no `StartData' keyword found\n" ));
                error = FT_THROW( Invalid_File_Format );
                goto Exit;
            }

            read_len = FT_MIN( read_len, stream_len );
            if ( FT_STREAM_READ( p, read_len ) )
                goto Exit;

            if ( read_len < 256 )
                p[read_len]  = '\0';

            limit = p + read_len - 10;

            for ( p = buffer; p < limit; p++ )
            {
                if ( p[0] == 'S' && ft_strncmp( (char*)p, "StartData", 9 ) == 0 )
                {
                    /* save offset of binary data after `StartData' */
                    offset += (FT_ULong)( p - buffer + 10 );
                    goto Found;
                }
                else if ( p[1] == 's' && ft_strncmp( (char*)p, "/sfnts", 6 ) == 0 )
                {
                    offset += (FT_ULong)( p - buffer + 7 );
                    goto Found;
                }
            }

            FT_MEM_MOVE( buffer, p, 10 );
            read_len = 256;
            p = buffer + 10;
        }
    }

Found:
    /* We have found the start of the binary data or the `/sfnts' token. */
    /* Now rewind and extract the frame corresponding to this PostScript */
    /* section.                                                          */

    ps_len = offset - base_offset;
    if ( FT_STREAM_SEEK( base_offset )                  ||
            FT_FRAME_EXTRACT( ps_len, parser->postscript ) )
        goto Exit;

    parser->data_offset    = offset;
    parser->postscript_len = ps_len;
    parser->root.base      = parser->postscript;
    parser->root.cursor    = parser->postscript;
    parser->root.limit     = parser->root.cursor + ps_len;
//.........这里部分代码省略.........
开发者ID:Johnny-Martin,项目名称:ComBase,代码行数:101,代码来源:cidparse.c


示例12: load_format_20

  static FT_Error
  load_format_20( TT_Face    face,
                  FT_Stream  stream )
  {
    FT_Memory   memory = stream->memory;
    FT_Error    error;

    FT_Int      num_glyphs;
    FT_UShort   num_names;

    FT_UShort*  glyph_indices = 0;
    FT_Char**   name_strings  = 0;


    if ( FT_READ_USHORT( num_glyphs ) )
      goto Exit;

    /* UNDOCUMENTED!  The number of glyphs in this table can be smaller */
    /* than the value in the maxp table (cf. cyberbit.ttf).             */

    /* There already exist fonts which have more than 32768 glyph names */
    /* in this table, so the test for this threshold has been dropped.  */

    if ( num_glyphs > face->root.num_glyphs )
    {
      error = SFNT_Err_Invalid_File_Format;
      goto Exit;
    }

    /* load the indices */
    {
      FT_Int  n;


      if ( FT_NEW_ARRAY ( glyph_indices, num_glyphs ) ||
           FT_FRAME_ENTER( num_glyphs * 2L )          )
        goto Fail;

      for ( n = 0; n < num_glyphs; n++ )
        glyph_indices[n] = FT_GET_USHORT();

      FT_FRAME_EXIT();
    }

    /* compute number of names stored in table */
    {
      FT_Int  n;


      num_names = 0;

      for ( n = 0; n < num_glyphs; n++ )
      {
        FT_Int  idx;


        idx = glyph_indices[n];
        if ( idx >= 258 )
        {
          idx -= 257;
          if ( idx > num_names )
            num_names = (FT_UShort)idx;
        }
      }
    }

    /* now load the name strings */
    {
      FT_UShort  n;


      if ( FT_NEW_ARRAY( name_strings, num_names ) )
        goto Fail;

      for ( n = 0; n < num_names; n++ )
      {
        FT_UInt  len;


        if ( FT_READ_BYTE  ( len )                    ||
             FT_NEW_ARRAY( name_strings[n], len + 1 ) ||
             FT_STREAM_READ  ( name_strings[n], len ) )
          goto Fail1;

        name_strings[n][len] = '\0';
      }
    }

    /* all right, set table fields and exit successfuly */
    {
      TT_Post_20  table = &face->postscript_names.names.format_20;


      table->num_glyphs    = (FT_UShort)num_glyphs;
      table->num_names     = (FT_UShort)num_names;
      table->glyph_indices = glyph_indices;
      table->glyph_names   = name_strings;
    }
    return SFNT_Err_Ok;

//.........这里部分代码省略.........
开发者ID:1tgr,项目名称:mobius,代码行数:101,代码来源:ttpost.c


示例13: T1_Get_Private_Dict

  T1_Get_Private_Dict( T1_Parser      parser,
                       PSAux_Service  psaux )
  {
    FT_Stream  stream = parser->stream;
    FT_Memory  memory = parser->root.memory;
    FT_Error   error  = 0;
    FT_Long    size;


    if ( parser->in_pfb )
    {
      /* in the case of the PFB format, the private dictionary can be  */
      /* made of several segments.  We thus first read the number of   */
      /* segments to compute the total size of the private dictionary  */
      /* then re-read them into memory.                                */
      FT_Long    start_pos = FT_STREAM_POS();
      FT_UShort  tag;


      parser->private_len = 0;
      for (;;)
      {
        error = read_pfb_tag( stream, &tag, &size );
        if ( error )
          goto Fail;

        if ( tag != 0x8002U )
          break;

        parser->private_len += size;

        if ( FT_STREAM_SKIP( size ) )
          goto Fail;
      }

      /* Check that we have a private dictionary there */
      /* and allocate private dictionary buffer        */
      if ( parser->private_len == 0 )
      {
        FT_ERROR(( "T1_Get_Private_Dict:" ));
        FT_ERROR(( " invalid private dictionary section\n" ));
        error = T1_Err_Invalid_File_Format;
        goto Fail;
      }

      if ( FT_STREAM_SEEK( start_pos )                             ||
           FT_ALLOC( parser->private_dict, parser->private_len ) )
        goto Fail;

      parser->private_len = 0;
      for (;;)
      {
        error = read_pfb_tag( stream, &tag, &size );
        if ( error || tag != 0x8002U )
        {
          error = T1_Err_Ok;
          break;
        }

        if ( FT_STREAM_READ( parser->private_dict + parser->private_len, size ) )
          goto Fail;

        parser->private_len += size;
      }
    }
    else
    {
      /* we have already `loaded' the whole PFA font file into memory; */
      /* if this is a memory resource, allocate a new block to hold    */
      /* the private dict. Otherwise, simply overwrite into the base   */
      /* dictionary block in the heap.                                 */

      /* first of all, look at the `eexec' keyword */
      FT_Byte*  cur   = parser->base_dict;
      FT_Byte*  limit = cur + parser->base_len;
      FT_Byte   c;


      for (;;)
      {
        c = cur[0];
        if ( c == 'e' && cur + 9 < limit )  /* 9 = 5 letters for `eexec' + */
                                            /* newline + 4 chars           */
        {
          if ( cur[1] == 'e' && cur[2] == 'x' &&
               cur[3] == 'e' && cur[4] == 'c' )
          {
            cur += 6; /* we skip the newling after the `eexec' */

            /* XXX: Some fonts use DOS-linefeeds, i.e. \r\n; we need to */
            /*      skip the extra \n if we find it                     */
            if ( cur[0] == '\n' )
              cur++;

            break;
          }
        }
        cur++;
        if ( cur >= limit )
        {
//.........这里部分代码省略.........
开发者ID:8l,项目名称:inferno,代码行数:101,代码来源:t1parse.c


示例14: ft_gzip_check_header

/* check and skip .gz header - we don't support `transparent' compression */
static FT_Error
ft_gzip_check_header( FT_Stream  stream )
{
    FT_Error  error;
    FT_Byte   head[4];


    if ( FT_STREAM_SEEK( 0 )       ||
            FT_STREAM_READ( head, 4 ) )
        goto Exit;

    /* head[0] && head[1] are the magic numbers;    */
    /* head[2] is the method, and head[3] the flags */
    if ( head[0] != 0x1f              ||
            head[1] != 0x8b              ||
            head[2] != Z_DEFLATED        ||
            (head[3] & FT_GZIP_RESERVED)  )
    {
        error = Gzip_Err_Invalid_File_Format;
        goto Exit;
    }

    /* skip time, xflags and os code */
    (void)FT_STREAM_SKIP( 6 );

    /* skip the extra field */
    if ( head[3] & FT_GZIP_EXTRA_FIELD )
    {
        FT_UInt  len;


        if ( FT_READ_USHORT_LE( len ) ||
                FT_STREAM_SKIP( len )    )
            goto Exit;
    }

    /* skip original file name */
    if ( head[3] & FT_GZIP_ORIG_NAME )
        for (;;)
        {
            FT_UInt  c;


            if ( FT_READ_BYTE( c ) )
                goto Exit;

            if ( c == 0 )
                break;
        }

    /* skip .gz comment */
    if ( head[3] & FT_GZIP_COMMENT )
        for (;;)
        {
            FT_UInt  c;


            if ( FT_READ_BYTE( c ) )
                goto Exit;

            if ( c == 0 )
                break;
        }

    /* skip CRC */
    if ( head[3] & FT_GZIP_HEAD_CRC )
        if ( FT_STREAM_SKIP( 2 ) )
            goto Exit;

Exit:
    return error;
}
开发者ID:bowlofstew,项目名称:Aquaria,代码行数:73,代码来源:ftgzip.c


示例15: CID_New_Parser

  CID_New_Parser( CID_Parser*    parser,
                  FT_Stream      stream,
                  FT_Memory      memory,
                  PSAux_Service  psaux )
  {
    FT_Error  error;
    FT_ULong  base_offset, offset, ps_len;
    FT_Byte   buffer[256 + 10];
    FT_Int    buff_len;


    FT_MEM_SET( parser, 0, sizeof ( *parser ) );
    psaux->ps_parser_funcs->init( &parser->root, 0, 0, memory );

    parser->stream = stream;

    base_offset = FT_STREAM_POS();

    /* first of all, check the font format in the  header */
    if ( FT_FRAME_ENTER( 31 ) )
      goto Exit;

    if ( ft_strncmp( (char *)stream->cursor,
                     "%!PS-Adobe-3.0 Resource-CIDFont", 31 ) )
    {
      FT_TRACE2(( "[not a valid CID-keyed font]\n" ));
      error = CID_Err_Unknown_File_Format;
    }

    FT_FRAME_EXIT();
    if ( error )
      goto Exit;

    /* now, read the rest of the file, until we find a `StartData' */
    buff_len = 256;
    for (;;)
    {
      FT_Byte   *p, *limit = buffer + 256;
      FT_ULong  top_position;


      /* fill input buffer */
      buff_len -= 256;
      if ( buff_len > 0 )
        FT_MEM_MOVE( buffer, limit, buff_len );

      p = buffer + buff_len;

      if ( FT_STREAM_READ( p, 256 + 10 - buff_len ) )
        goto Exit;

      top_position = FT_STREAM_POS() - buff_len;
      buff_len = 256 + 10;

      /* look for `StartData' */
      for ( p = buffer; p < limit; p++ )
      {
        if ( p[0] == 'S' && ft_strncmp( (char*)p, "StartData", 9 ) == 0 )
        {
          /* save offset of binary data after `StartData' */
          offset = (FT_ULong)( top_position - ( limit - p ) + 10 );
          goto Found;
        }
      }
    }

  Found:
    /* we have found the start of the binary data.  We will now        */
    /* rewind and extract the frame of corresponding to the Postscript */
    /* section                                                         */

    ps_len = offset - base_offset;
    if ( FT_STREAM_SEEK( base_offset )                    ||
         FT_FRAME_EXTRACT( ps_len, parser->postscript ) )
      goto Exit;

    parser->data_offset    = offset;
    parser->postscript_len = ps_len;
    parser->root.base      = parser->postscript;
    parser->root.cursor    = parser->postscript;
    parser->root.limit     = parser->root.cursor + ps_len;
    parser->num_dict       = -1;

  Exit:
    return error;
  }
开发者ID:SOLARIC,项目名称:world-opponent-network,代码行数:86,代码来源:cidparse.c


示例16: T1_New_Parser

  T1_New_Parser( T1_Parser      parser,
                 FT_Stream      stream,
                 FT_Memory      memory,
                 PSAux_Service  psaux )
  {
    FT_Error   error;
    FT_UShort  tag;
    FT_ULong   size;


    psaux->ps_parser_funcs->init( &parser->root, 0, 0, memory );

    parser->stream       = stream;
    parser->base_len     = 0;
    parser->base_dict    = 0;
    parser->private_len  = 0;
    parser->private_dict = 0;
    parser->in_pfb       = 0;
    parser->in_memory    = 0;
    parser->single_block = 0;

    /* check the header format */
    error = check_type1_format( stream, "%!PS-AdobeFont", 14 );
    if ( error )
    {
      if ( FT_ERR_NEQ( error, Unknown_File_Format ) )
        goto Exit;

      error = check_type1_format( stream, "%!FontType", 10 );
      if ( error )
      {
        FT_TRACE2(( "  not a Type 1 font\n" ));
        goto Exit;
      }
    }

    /******************************************************************/
    /*                                                                */
    /* Here a short summary of what is going on:                      */
    /*                                                                */
    /*   When creating a new Type 1 parser, we try to locate and load */
    /*   the base dictionary if this is possible (i.e., for PFB       */
    /*   files).  Otherwise, we load the whole font into memory.      */
    /*                                                                */
    /*   When `loading' the base dictionary, we only setup pointers   */
    /*   in the case of a memory-based stream.  Otherwise, we         */
    /*   allocate and load the base dictionary in it.                 */
    /*                                                                */
    /*   parser->in_pfb is set if we are in a binary (`.pfb') font.   */
    /*   parser->in_memory is set if we have a memory stream.         */
    /*                                                                */

    /* try to compute the size of the base dictionary;     */
    /* look for a Postscript binary file tag, i.e., 0x8001 */
    if ( FT_STREAM_SEEK( 0L ) )
      goto Exit;

    error = read_pfb_tag( stream, &tag, &size );
    if ( error )
      goto Exit;

    if ( tag != 0x8001U )
    {
      /* assume that this is a PFA file for now; an error will */
      /* be produced later when more things are checked        */
      if ( FT_STREAM_SEEK( 0L ) )
        goto Exit;
      size = stream->size;
    }
    else
      parser->in_pfb = 1;

    /* now, try to load `size' bytes of the `base' dictionary we */
    /* found previously                                          */

    /* if it is a memory-based resource, set up pointers */
    if ( !stream->read )
    {
      parser->base_dict = (FT_Byte*)stream->base + stream->pos;
      parser->base_len  = size;
      parser->in_memory = 1;

      /* check that the `size' field is valid */
      if ( FT_STREAM_SKIP( size ) )
        goto Exit;
    }
    else
    {
      /* read segment in memory -- this is clumsy, but so does the format */
      if ( FT_ALLOC( parser->base_dict, size )       ||
           FT_STREAM_READ( parser->base_dict, size ) )
        goto Exit;
      parser->base_len = size;
    }

    parser->root.base   = parser->base_dict;
    parser->root.cursor = parser->base_dict;
    parser->root.limit  = parser->root.cursor + parser->base_len;

  Exit:
//.........这里部分代码省略.........
开发者ID:PrinttingGroup,项目名称:SumatraPDF_SpecialPrint,代码行数:101,代码来源:t1parse.c


示例17: get_sfnt_postscript_name

  static const char*
  get_sfnt_postscript_name( TT_Face  face )
  {
    FT_Int       n, found_win, found_apple;
    const char*  result = NULL;


    /* shouldn't happen, but just in case to avoid memory leaks */
    if ( face->root.internal->postscript_name )
      return face->root.internal->postscript_name;

    /* scan the name table to see whether we have a Postscript name here, */
    /* either in Macintosh or Windows platform encodings                  */
    found_win   = -1;
    found_apple = -1;

    for ( n = 0; n < face->num_names; n++ )
    {
      TT_NameEntryRec*  name = face->name_table.names + n;


      if ( name->nameID == 6 && name->stringLength > 0 )
      {
        if ( name->platformID == 3     &&
             name->encodingID == 1     &&
             name->languageID == 0x409 )
          found_win = n;

        if ( name->platformID == 1 &&
             name->encodingID 

鲜花

握手

雷人

路过

鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
上一篇:
C++ FT_STREAM_READ_FIELDS函数代码示例发布时间:2022-05-30
下一篇:
C++ FT_STREAM_POS函数代码示例发布时间:2022-05-30
热门推荐
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服(服务时间 9:00~18:00)

在线QQ客服
地址:深圳市南山区西丽大学城创智工业园
电邮:jeky_zhao#qq.com
移动电话:139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap