C++ FELICA_DEBUG_MSG函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中FELICA_DEBUG_MSG函数的典型用法代码示例。如果您正苦于以下问题：C++ FELICA_DEBUG_MSG函数的具体用法？C++ FELICA_DEBUG_MSG怎么用？C++ FELICA_DEBUG_MSG使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了FELICA_DEBUG_MSG函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: felica_uart_write

int felica_uart_write(char *buf, size_t count)
{
    mm_segment_t old_fs = get_fs();
    int n;

    #ifdef FEATURE_DEBUG_LOW
    FELICA_DEBUG_MSG("[FELICA_UART] write_hs_uart - start \n");
    #endif

    if (uart_f == NULL)
    {
        #ifdef FEATURE_DEBUG_HIGH
        FELICA_DEBUG_MSG("[FELICA_UART] felica_uart is not opened\n");
		#endif
        return 0;
    }

    set_fs(KERNEL_DS);
    n = vfs_write(uart_f, buf, count, &uart_f->f_pos);
    #ifdef FEATURE_DEBUG_LOW
    FELICA_DEBUG_MSG("[FELICA_UART] write_hs_uart - write (%d)\n", n);
    #endif
    set_fs(old_fs);

    #ifdef FEATURE_DEBUG_LOW
    FELICA_DEBUG_MSG("[FELICA_UART] write_hs_uart - end \n");
    #endif

    return n;
}

开发者ID:romanbb，项目名称:android_kernel_lge_d851，代码行数:30，代码来源:felica_uart.c

示例2: felica_rfs_release

/*
 * Description: MFC calls this function using close method(int close()) of FileInputStream class
 * Input: None
 * Output: RFS low : 1 RFS high : 0
 */
static int felica_rfs_release (struct inode *inode, struct file *fp)
{
  if(0 == isopen)
  {
    #ifdef FEATURE_DEBUG_LOW
    FELICA_DEBUG_MSG("[FELICA_RFS] felica_rfs_release - not open \n");
    #endif

    return -1;
  }
  else
  {
    #ifdef FEATURE_DEBUG_LOW
    FELICA_DEBUG_MSG("[FELICA_RFS] felica_rfs_release - start \n");
    #endif

    isopen = 0;
  }
#ifdef FELICA_LED_SUPPORT
 isFelicaUsed = 0;
#endif

  #ifdef FEATURE_DEBUG_LOW
  FELICA_DEBUG_MSG("[FELICA_RFS] felica_rfs_release - end \n");
  #endif

#ifdef FELICA_FN_DEVICE_TEST
  FELICA_DEBUG_MSG("[FELICA_RFS] felica_rfs_release - result(%d) \n",result_close_rfs);
  return result_close_rfs;
#else
  return 0;
#endif
}

开发者ID:HB72K1，项目名称:LG-G2-D802-Kernel，代码行数:38，代码来源:felica_rfs.c

示例3: felica_rws_open

/*
* Description : MFC calls this function using close method(void open()) of FileOutputStream class
*               When this fuction is excuted, set PON to Low.
* Input : None
* Output : Success : 0 Fail : Other
*/
static int felica_rws_open (struct inode *inode, struct file *fp)
{
  int rc = 0;

  if(1 == isopen)
  {
    #ifdef FEATURE_DEBUG_LOW
    FELICA_DEBUG_MSG("[FELICA_RWS] felica_rws_open - already open \n");
    #endif

    return -1;
  }
  else
  {
    #ifdef FEATURE_DEBUG_LOW
    FELICA_DEBUG_MSG("[FELICA_RWS] felica_rws_open - start \n");
    #endif

    isopen = 1;
  }

  rc = felica_gpio_open(GPIO_FELICA_INT, GPIO_DIRECTION_IN, GPIO_HIGH_VALUE);

  #ifdef FEATURE_DEBUG_LOW
  FELICA_DEBUG_MSG("[FELICA_RWS] felica_rws_open - end \n");
  #endif

#ifdef FELICA_FN_DEVICE_TEST
  FELICA_DEBUG_MSG("[FELICA_RWS] felica_rws_open - result(%d) \n",result_open_rws);
  return result_open_rws;
#else
    return rc;
#endif
}

开发者ID:regit66，项目名称:android_kernel_lge_geehrc，代码行数:40，代码来源:felica_rws.c

示例4: felica_uart_ioctrl

/*
* Description : get size of remaing data
* Input : none
* Output : success : data length fail : 0
*/
int felica_uart_ioctrl(int *count)
{
  mm_segment_t old_fs = get_fs();
  int rc = 0;

  #ifdef FEATURE_DEBUG_LOW
  FELICA_DEBUG_MSG("[FELICA_UART] felica_uart_ioctrl - start \n");
  #endif

  if(0 > fd)
  {
    FELICA_DEBUG_MSG("[FELICA_UART] felica_uart is not opened\n");
    return rc;
  }

  set_fs(KERNEL_DS);
  
  rc = sys_ioctl(fd, TIOCINQ, (unsigned long)count);

  set_fs(old_fs);

  #ifdef FEATURE_DEBUG_LOW
  FELICA_DEBUG_MSG("[FELICA_UART] felica_uart_ioctrl - end \n");
  #endif

  return rc;
}

开发者ID:Juanito216，项目名称:lge-kernel-omap4，代码行数:32，代码来源:felica_uart.c

示例5: felica_rfs_interrupt_work

static void felica_rfs_interrupt_work(struct work_struct *data)
{
	int rc = 0;

	disable_irq_nosync(gpio_to_irq(felica_get_rfs_gpio_num()));
	usermodehelper_enable();

	#ifdef FEATURE_DEBUG_LOW
	FELICA_DEBUG_MSG("[FELICA_RFS] felica_rfs_interrupt_work - start \n");
	#endif

	rc = invoke_led_service();

	if(rc)
	{
      #ifdef FEATURE_DEBUG_HIGH
      FELICA_DEBUG_MSG("[FELICA_RFS] Error - invoke app \n");
	unlock_felica_rfs_wake_lock();
	isFelicaUsed =0;
	  #endif
	}
	#ifdef FEATURE_DEBUG_LOW
	FELICA_DEBUG_MSG("[FELICA_RFS] felica_rfs_interrupt_work - end \n");
	#endif

	enable_irq(gpio_to_irq(felica_get_rfs_gpio_num()));
}

开发者ID:HB72K1，项目名称:LG-G2-D802-Kernel，代码行数:27，代码来源:felica_rfs.c

示例6: felica_uart_close

int felica_uart_close(void)
{
    mm_segment_t old_fs = get_fs();

    #ifdef FEATURE_DEBUG_LOW
    FELICA_DEBUG_MSG("[FELICA_UART] close_hs_uart - start \n");
    #endif

    if (uart_f == NULL)
    {
        #ifdef FEATURE_DEBUG_HIGH
        FELICA_DEBUG_MSG("[FELICA_UART] felica_uart is not opened \n");
		#endif
        return 0;
    }

    set_felica_uart_status(UART_STATUS_READY);

    set_fs(KERNEL_DS);
    filp_close(uart_f, NULL);
    uart_f = NULL;
    set_fs(old_fs);

    #ifdef FEATURE_DEBUG_LOW
    FELICA_DEBUG_MSG("[FELICA_UART] close_hs_uart - end \n");
    #endif

    return 0;
}

开发者ID:romanbb，项目名称:android_kernel_lge_d851，代码行数:29，代码来源:felica_uart.c

示例7: felica_uart_ioctrl

int felica_uart_ioctrl(int *count)
{
    mm_segment_t old_fs = get_fs();
    int n;

    #ifdef FEATURE_DEBUG_LOW
    FELICA_DEBUG_MSG("[FELICA_UART] felica_uart_ioctrl - start \n");
    #endif

    if (uart_f == NULL)
    {
        #ifdef FEATURE_DEBUG_HIGH
        FELICA_DEBUG_MSG("[FELICA_UART] felica_uart is not opened\n");
		#endif
        return 0;
    }

    set_fs(KERNEL_DS);
    n = do_vfs_ioctl(uart_f, -1, TIOCINQ, (unsigned long)count);
    #ifdef FEATURE_DEBUG_MED
    FELICA_DEBUG_MSG("[FELICA_UART] do_vfs_ioctl return(%d), count(%d) \n", n, *count);
    #endif
    set_fs(old_fs);

    #ifdef FEATURE_DEBUG_LOW
    FELICA_DEBUG_MSG("[FELICA_UART] felica_uart_ioctrl - end \n");
    #endif

    return n;
}

开发者ID:romanbb，项目名称:android_kernel_lge_d851，代码行数:30，代码来源:felica_uart.c

示例8: felica_uart_open

/*
* Description : open uart
* Input : None
* Output : success : 0 fail : others
*/
int felica_uart_open(void)
{
//  struct termios newtio;
  int rc;
  mm_segment_t old_fs = get_fs();

  #ifdef FEATURE_DEBUG_LOW
  FELICA_DEBUG_MSG("[FELICA_UART] open_hs_uart - start \n");
  #endif

  if(0 <= fd)
  {
    FELICA_DEBUG_MSG("[FELICA_UART] felica_uart is already opened fd : %d\n",fd);
    return 0;
  }

  set_fs(KERNEL_DS);

    fd = sys_open("/dev/ttyO3", O_RDWR | O_NOCTTY | O_NONBLOCK, 0);
    
  FELICA_DEBUG_MSG("[FELICA_UART] open UART - fd : %d \n",fd);
    
    
    if (fd < 0)
    {
    FELICA_DEBUG_MSG("[FELICA_UART] ERROR - can not sys_open \n");
      set_fs(old_fs);
      return fd;
    }

    {
      /*  Set speed */
      struct termios newtio;

      // yjchoi; 120412 temporary block due to build error
      serial_omap_disable_console_port();
      
      // yjchoi; 120412 temporary block due to build error
      rc = felica_gpio_open(GPIO_FELICA_UART_SW, GPIO_DIRECTION_OUT, GPIO_LOW_VALUE);

      felica_gpio_write(GPIO_FELICA_UART_SW, 0);
      sys_ioctl(fd, TCGETS, (unsigned long)&newtio);
      memcpy(&console_settings, &newtio, sizeof(struct termios));

      memset(&newtio, 0, sizeof(newtio));
      newtio.c_cflag = B460800 | CS8 | CLOCAL | CREAD;
      newtio.c_cc[VMIN] = 1;
      newtio.c_cc[VTIME] = 5;
      sys_ioctl(fd, TCFLSH, TCIOFLUSH);
      sys_ioctl(fd, TCSETSF, (unsigned long)&newtio);
    }
    set_fs(old_fs);

  #ifdef FEATURE_DEBUG_LOW
  FELICA_DEBUG_MSG("[FELICA_UART] open_hs_uart - end \n");
  #endif

  return 0;
}

开发者ID:Juanito216，项目名称:lge-kernel-omap4，代码行数:64，代码来源:felica_uart.c

示例9: felica_cal_read

/*
* Description :
* Input :
* Output :
*/
static ssize_t felica_cal_read(struct file *fp, char *buf, size_t count, loff_t *pos)
{
    unsigned char read_buf = 0x00;
    int rc = -1;

#ifdef FEATURE_DEBUG_LOW
    FELICA_DEBUG_MSG("[FELICA_CAL] felica_cal_read - start \n");
#endif

    /* Check error */
    if(NULL == fp)
    {
        FELICA_DEBUG_MSG("[FELICA_CAL] ERROR fp \n");
        return -1;
    }

    if(NULL == buf)
    {
        FELICA_DEBUG_MSG("[FELICA_CAL] ERROR buf \n");
        return -1;
    }

    if(1 != count)
    {
        FELICA_DEBUG_MSG("[FELICA_CAL] ERROR count \n");
        return -1;
    }

    if(NULL == pos)
    {
        FELICA_DEBUG_MSG("[FELICA_CAL] ERROR file \n");
        return -1;
    }



    rc = felica_i2c_read(FELICA_I2C_REG_ADDRSS_01, &read_buf, 1);
    if(rc)
    {
        FELICA_DEBUG_MSG("[FELICA_CAL] felica_i2c_read : %d \n",rc);
        return -1;
    }

#ifdef FEATURE_DEBUG_LOW
    FELICA_DEBUG_MSG("[FELICA_CAL] felica_cal : 0x%02x \n",read_buf);
#endif

    rc = copy_to_user(buf, &read_buf, count);
    if(rc)
    {
        FELICA_DEBUG_MSG("[FELICA_CAL] ERROR - copy_from_user \n");
        return -1;
    }

#ifdef FEATURE_DEBUG_LOW
    FELICA_DEBUG_MSG("[FELICA_CAL] felica_cal_read - end \n");
#endif

    return 1;
}

开发者ID:HB72K1，项目名称:LG-G2-D802-Kernel，代码行数:65，代码来源:felica_cal.c

示例10: felica_rfs_open_after_boot_work

static void felica_rfs_open_after_boot_work(struct work_struct *data)
{
	int rc = 0;
    #ifdef FEATURE_DEBUG_LOW
	FELICA_DEBUG_MSG("[FELICA_RFS] felica_rfs_open_after_boot_work - start");
    #endif
	rc = felica_gpio_open(felica_get_rfs_gpio_num(), GPIO_DIRECTION_IN, GPIO_HIGH_VALUE);
    #ifdef FEATURE_DEBUG_LOW
	FELICA_DEBUG_MSG("[FELICA_RFS] felica_rfs_open_after_boot_work - end");
    #endif
}

开发者ID:Fechinator，项目名称:FechdaKernel，代码行数:11，代码来源:felica_rfs.c

示例11: felica_uart_close

/*
* Description : close uart
* Input : None
* Output : success : 0
*/
int felica_uart_close(void)
{

  mm_segment_t old_fs = get_fs();

  #ifdef FEATURE_DEBUG_LOW
  FELICA_DEBUG_MSG("[FELICA_UART] close_hs_uart - start \n");
  #endif

  if(0 > fd)
  {
    FELICA_DEBUG_MSG("[FELICA_UART] felica_uart is not opened\n");
    return 0;
  }

    set_fs(KERNEL_DS);
    {
      /*  Set speed */
      struct termios settings;
  
      sys_ioctl(fd, TCGETS, (unsigned long)&settings);
#if 1
      memcpy(&settings, &console_settings, sizeof(struct termios));
      FELICA_DEBUG_MSG("[FELICA_UART] Set BAUD rate to 115200\n");
#else
      if((settings.c_cflag & CBAUD) == B460800)
      {
        settings.c_cflag &= ~(CBAUD);
        settings.c_cflag |= B115200;
        FELICA_DEBUG_MSG("[FELICA_UART] Set BAUD rate to 115200\n");
      }
#endif
      sys_ioctl(fd, TCSETS, (unsigned long)&settings);
    }

  sys_close(fd);
  fd = -1;

  felica_gpio_write(GPIO_FELICA_UART_SW, 1);

  // yjchoi; 120412 temporary block due to build error
  serial_omap_enable_console_port();

  set_fs(old_fs);

  #ifdef FEATURE_DEBUG_LOW
  FELICA_DEBUG_MSG("[FELICA_UART] close_hs_uart - end \n");
  #endif

  return 0;

}

开发者ID:Juanito216，项目名称:lge-kernel-omap4，代码行数:57，代码来源:felica_uart.c

示例12: felica_rfs_detect_interrupt

irqreturn_t felica_rfs_detect_interrupt(int irq, void *dev_id)
{
	#ifdef FEATURE_DEBUG_LOW
	FELICA_DEBUG_MSG("[FELICA_RFS] felica_rfs_low_isr - start \n");
	#endif

	schedule_delayed_work(&felica_rfs_interrupt,0);

	#ifdef FEATURE_DEBUG_LOW
	FELICA_DEBUG_MSG("[FELICA_RFS] felica_rfs_low_isr - end \n");
	#endif
	return IRQ_HANDLED;
}

开发者ID:shaqfu786，项目名称:FreshBake，代码行数:13，代码来源:felica_rfs.c

示例13: felica_cal_exit

/*
* Description :
* Input :
* Output :
*/
static void felica_cal_exit(void)
{
#ifdef FEATURE_DEBUG_LOW
    FELICA_DEBUG_MSG("[FELICA_CAL] felica_cal_exit - start \n");
#endif

    /* deregister the device file */
    misc_deregister(&felica_cal_device);

#ifdef FEATURE_DEBUG_LOW
    FELICA_DEBUG_MSG("[FELICA_CAL] felica_cal_exit - end \n");
#endif
}

开发者ID:HB72K1，项目名称:LG-G2-D802-Kernel，代码行数:18，代码来源:felica_cal.c

示例14: felica_rws_exit

static void felica_rws_exit(void)
{
  #ifdef FEATURE_DEBUG_LOW
  FELICA_DEBUG_MSG("[FELICA_INT] felica_rws_exit - start \n");
  #endif

  free_irq(gpio_to_irq(GPIO_FELICA_INT), NULL);

  misc_deregister(&felica_rws_device);
  
  #ifdef FEATURE_DEBUG_LOW
  FELICA_DEBUG_MSG("[FELICA_INT] felica_rws_exit - end \n");
  #endif
}

开发者ID:Juanito216，项目名称:lge-kernel-omap4，代码行数:14，代码来源:felica_rws.c

示例15: felica_int_low_isr

static irqreturn_t felica_int_low_isr(int irq, void *dev_id)
{
  #ifdef FEATURE_DEBUG_LOW
  FELICA_DEBUG_MSG("[FELICA_RWS] felica_int_low_isr - start \n");
  #endif

  schedule_delayed_work(&felica_int_work,0);
  
  #ifdef FEATURE_DEBUG_LOW
  FELICA_DEBUG_MSG("[FELICA_RWS] felica_int_low_isr - end \n");
  #endif

	return IRQ_HANDLED;
}

开发者ID:Juanito216，项目名称:lge-kernel-omap4，代码行数:14，代码来源:felica_rws.c

示例16: felica_exit

/*
* Description :
* Input :
* Output :
*/
static void felica_exit(void)
{
  #ifdef FEATURE_DEBUG_LOW
  FELICA_DEBUG_MSG("[FELICA] felica_exit - start \n");
  #endif

  destroy_felica_wake_lock();

  /* deregister the device file */
  misc_deregister(&felica_device);

  #ifdef FEATURE_DEBUG_LOW
  FELICA_DEBUG_MSG("[FELICA] felica_exit - end \n");
  #endif
}

开发者ID:ChangYeoun，项目名称:10.1，代码行数:20，代码来源:felica.c

示例17: felica_get_rfs_gpio_num

int felica_get_rfs_gpio_num(void)
{
/*                                                                         */

  int gpionum = GPIO_FELICA_RFS;

  pr_info("CBAL current rev -> %d \n",lge_get_board_revno());


  if (lge_get_board_revno() < HW_REV_B)
  {
	  pr_info("CBAL RFS-CDET gpio rev old -> %d \n",GPIO_FELICA_RFS_REV_A);

    gpionum = GPIO_FELICA_RFS_REV_A;
  }
  else
  {
	  pr_info("CBAL RFS-CDET gpio rev -> %d \n",GPIO_FELICA_RFS);

    gpionum = GPIO_FELICA_RFS;
  }

	#ifdef FEATURE_DEBUG_LOW
	FELICA_DEBUG_MSG("[FELICA_GPIO] felica_get_rfs_gpio_num(%d) \n",gpionum);
	#endif
	return gpionum;	

	return GPIO_FELICA_RFS;

}

开发者ID:romanbb，项目名称:android_kernel_lge_d851，代码行数:30，代码来源:felica_gpio.c

示例18: felica_fsync

/*
* Description :
* Input :
* Output :
*/
static int felica_fsync(struct file *fp, loff_t param1, loff_t param2, int datasync)
{
   FELICA_DEBUG_MSG("[FELICA] felica_fsync\n");

  // TODO: TRANSMIT DATA TO FELICA CHIP

  return 0;
}

开发者ID:ChangYeoun，项目名称:10.1，代码行数:13，代码来源:felica.c

示例19: felica_cal_release

/*
* Description :
* Input :
* Output :
*/
static int felica_cal_release (struct inode *inode, struct file *fp)
{
#ifdef FEATURE_DEBUG_LOW
    FELICA_DEBUG_MSG("[FELICA_CAL] felica_cal_release \n");
#endif

    return 0;
}

开发者ID:HB72K1，项目名称:LG-G2-D802-Kernel，代码行数:13，代码来源:felica_cal.c

示例20: invoke_felica_apk

/*
 *    FUNCTION DEFINITION
 */
static int invoke_felica_apk(void)
{
  char *argv[] = { "/system/bin/sh","/system/bin/am", "start", "-n", FELICA_INTENT, "--activity-clear-top", NULL };

  static char *envp[] = {FELICA_LD_LIBRARY_PATH,FELICA_BOOTCLASSPATH,FELICA_PATH,NULL };
  int rc = 0;

#ifdef FEATURE_DEBUG_LOW
  FELICA_DEBUG_MSG("[FELICA_RWS] invoke felica app... \n");
#endif

  rc = call_usermodehelper( argv[0], argv, envp, UMH_WAIT_EXEC );

  FELICA_DEBUG_MSG("[FELICA_RWS] felica app result : %d \n", rc);

  return rc;
}

开发者ID:Juanito216，项目名称:lge-kernel-omap4，代码行数:20，代码来源:felica_rws.c

注：本文中的FELICA_DEBUG_MSG函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ FF函数代码示例发布时间：2022-05-30

C++ FEIElementGeometryWrapper函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19170|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9982|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8322|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8691|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8635|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9651|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8618|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7995|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8649|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7532|2022-11-06

客服电话

电子邮件

C++ FELICA_DEBUG_MSG函数代码示例

示例1: felica_uart_write

示例2: felica_rfs_release

示例3: felica_rws_open

示例4: felica_uart_ioctrl

示例5: felica_rfs_interrupt_work

示例6: felica_uart_close

示例7: felica_uart_ioctrl

示例8: felica_uart_open

示例9: felica_cal_read

示例10: felica_rfs_open_after_boot_work

示例11: felica_uart_close

示例12: felica_rfs_detect_interrupt

示例13: felica_cal_exit

示例14: felica_rws_exit

示例15: felica_int_low_isr

示例16: felica_exit

示例17: felica_get_rfs_gpio_num

示例18: felica_fsync

示例19: felica_cal_release

示例20: invoke_felica_apk

请发表评论

全部评论

上一篇：

下一篇：

CVE-2022-32051

xorrior/macOSTools: macOS Offensive Tool

caseypugh/minecraft: Some scripts to mak

Testinium/MobileDeviceInfo

xsfelvis/MaterialDesignStudy: A practic

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053