C++ F函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中F函数的典型用法代码示例。如果您正苦于以下问题：C++ F函数的具体用法？C++ F怎么用？C++ F使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了F函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: parseFileName

void  MyFunctionRequestHandler::upload(ESP8266WebServer& server, String requestUri, HTTPUpload& upload){
  //Serial.println(String(F("upload(")) + requestUri + String(F(")")));

  String filename = parseFileName(upload.filename);

  if (filename.endsWith(".bin")) { // handle firmware upload
    mbRebootRequired = true;
    if (upload.status == UPLOAD_FILE_START) {
      if (mDebug) Serial.println("Update: " + upload.filename);
      uint32_t maxSketchSpace = (ESP.getFreeSketchSpace() - 0x1000) & 0xFFFFF000;
      if (!Update.begin(maxSketchSpace)) { //start with max available size
        if (mDebug) Update.printError(Serial);
      }
    } else if (upload.status == UPLOAD_FILE_WRITE) {
      if (mDebug) Serial.print(".");
      if (Update.write(upload.buf, upload.currentSize) != upload.currentSize) {
        if (mDebug) Update.printError(Serial);
      }
    } else if (upload.status == UPLOAD_FILE_END) {
      miUploadSize = Update.size();
      if (Update.end(true)) { //true to set the size to the current progress
        if (mDebug) Serial.println(String(F("Update Success - uploaded: ")) + String(upload.totalSize) + String(F(".... rebooting now!")));
      } else {
        if (mDebug) Update.printError(Serial);
      }
      if (mDebug) Serial.setDebugOutput(false);
    } else if (upload.status == UPLOAD_FILE_ABORTED) {
      miUploadSize = Update.size();
      Update.end();
      if (mDebug) Serial.println(F("Update was aborted"));
    }

  } else { // handle file upload
    mbRebootRequired = false;
    if (upload.status == UPLOAD_FILE_START) {
      if (mDebug) Serial.println(String(F("uploading to SPIFFS: /")) + filename);
      mUploadFile = SPIFFS.open("/" + filename, "w");
    } else if (upload.status == UPLOAD_FILE_WRITE) {
      if (mDebug) Serial.print(".");
      if (mUploadFile.write(upload.buf, upload.currentSize) != upload.currentSize) {
        if (mDebug) Serial.println(String(F("ERROR writing file ")) + String(mUploadFile.name()) + String(F("to SPIFFS.")));
        mUploadFile.close();
      }
    } else if (upload.status == UPLOAD_FILE_END) {
      miUploadSize = upload.totalSize;
      if (mUploadFile.size() == upload.totalSize) {
        if (mDebug) Serial.println(String(F("Upload to SPIFFS Succeeded - uploaded: ")) + String(upload.totalSize) + String(F(".... rebooting now!")));
      } else {
        if (mDebug) Serial.println(String(F("Upload to SPIFFS FAILED: ")) + String(mUploadFile.size()) + String(F(" bytes of ")) + String(upload.totalSize));
      }
      mUploadFile.close();
      if (!upload.totalSize){
        if (mDebug) Serial.println("Removing: " + filename);
        SPIFFS.remove("/" + filename);
      }
    } else if (upload.status == UPLOAD_FILE_ABORTED) {
      miUploadSize = upload.totalSize;
      mUploadFile.close();
      if (mDebug) Serial.println(F("Upload to SPIFFS was aborted"));
    }
  }
}

开发者ID:Dynatrace，项目名称:ufo，代码行数:62，代码来源:MyRequestHandler.cpp

示例2: F

void MyFunctionRequestHandler::infoHandler(ESP8266WebServer& server) {

  String json = F("{");
  json += '"'; json += F("heap"); json += '"';
  json += ':';
  json += '"'; json +=  String(ESP.getFreeHeap()); json += '"';
  json += F(", "); 
  json += '"'; json += F("ssid"); json += '"';
  json += ':';
  json += '"'; json +=  String(WiFi.SSID()); json += '"';
  json += F(", "); 
  json += '"'; json += F("ipaddress"); json += '"';
  json += ':';
  json += '"'; json +=  WiFi.localIP().toString(); json += '"';
  json += F(", "); 
  json += '"'; json += F("ipgateway"); json += '"';
  json += ':';
  json += '"'; json +=  WiFi.gatewayIP().toString(); json += '"';
  json += F(", "); 
  json += '"'; json += F("ipdns"); json += '"';
  json += ':';
  json += '"'; json += WiFi.dnsIP().toString(); json += '"';
  json += F(", "); 
  json += '"'; json += F("ipsubnetmask"); json += '"';
  json += ':';
  json += '"'; json +=  WiFi.subnetMask().toString(); json += '"';
  json += F(", "); 
  json += '"'; json += F("macaddress"); json += '"';
  json += ':';
  json += '"'; json +=  WiFi.macAddress(); json += '"';
  json += F(", "); 
  json += '"'; json += F("hostname"); json += '"';
  json += ':';
  json += '"'; json +=  WiFi.hostname(); json += '"';
  json += F(", "); 
  json += '"'; json += F("apipaddress"); json += '"';
  json += ':';
  json += '"'; json +=  WiFi.softAPIP().toString(); json += '"';
  json += F(", "); 
  json += '"'; json += F("apconnectedstations"); json += '"';
  json += ':';
  json += '"'; json += String(WiFi.softAPgetStationNum()); json += '"';
  json += F(", "); 
  json += '"'; json += F("wifiautoconnect"); json += '"';
  json += ':';
  json += '"'; json += String(WiFi.getAutoConnect()); json += '"';
  json += F(", "); 
  json += '"'; json += F("firmwareversion"); json += '"';
  json += ':';
  json += '"'; json += String(FIRMWARE_VERSION); json += '"';
  json += '}';
  
  server.sendHeader(F("cache-control"), F("private, max-age=0, no-cache, no-store"));
  server.send(200, F("text/json"), json);
}

开发者ID:Dynatrace，项目名称:ufo，代码行数:55，代码来源:MyRequestHandler.cpp

示例3: ASSURE_OPTION

void
Style::drawComboBox(const QStyleOptionComplex *option, QPainter *painter, const QWidget *widget) const
{
    ASSURE_OPTION(cmb, ComboBox);
    OPT_ENABLED OPT_HOVER OPT_FOCUS
    SAVE_PAINTER(Pen|Brush|Alias);
    if ( widget && widget->inherits("WebView") ) {
        // paints hardcoded black text bypassing the style?! grrr...
        const_cast<QStyleOptionComboBox*>(cmb)->palette.setColor(QPalette::Window, QColor(230,230,230,255));
        widget = 0;
    }

    animStep = !widget ? MAX_STEPS*hover : Animator::Hover::step(widget);

    QRect ar;
    const QComboBox *combo = widget ? qobject_cast<const QComboBox*>(widget) : NULL;
    if ((cmb->subControls & SC_ComboBoxArrow) && (!combo || combo->count() > 0)) {   // do we have an arrow?
        ar = subControlRect(CC_ComboBox, cmb, SC_ComboBoxArrow, widget);
        const int dx = (F(2) & ~1) / 2;
        ar.translate(cmb->direction == Qt::LeftToRight ? -dx : dx, 0);
    }

    const bool listShown = combo && combo->view() && ((QWidget*)(combo->view()))->isVisible();
    if (listShown) { // this messes up hover
        hover = hover || QRect(widget->mapToGlobal(RECT.topLeft()), RECT.size()).contains(QCursor::pos()); // TODO Qt5, avoid asking for the cursor pos
        animStep = MAX_STEPS;
    }

    QColor c = hasFocus ? FCOLOR(Highlight) : (cmb->editable ? FCOLOR(Text) : FCOLOR(WindowText));
    if (cmb->editable) {
        drawLineEditFrame(option, painter, widget);
        c = FX::blend(FCOLOR(Base), c, MAX_STEPS, 1 + 2*animStep);
    } else {
        const int icon = cmb->currentIcon.isNull() ? 0 : cmb->iconSize.width() + F(4);
        QFont fnt(painter->font());
        fnt.setBold(true);
        int text = QFontMetrics(fnt).width(cmb->currentText);
        if (text)
            text += F(4);

        if (!(text+icon)) // webkit etc.
            text = ar.left() - (F(16) + RECT.x());

        painter->setRenderHint(QPainter::Antialiasing, true);
        painter->setPen(QPen(hasFocus ? FCOLOR(Highlight) : FX::blend(FCOLOR(Window), c, 4, 1), FRAME_STROKE));
        painter->setBrush(Qt::NoBrush);

        const int y = ar.y() + ar.height()/2;
        const int da = animStep * 168 / MAX_STEPS;
        if (option->direction == Qt::LeftToRight) {
            DRAW_SEGMENT(ar, 16*(120 - da/2), 16*(192+da));
            painter->drawLine(RECT.x() + icon + text + F(6), y, ar.left()-F(2), y);
        } else {
            DRAW_SEGMENT(ar, 16*(30 + da/2), -16*(192+da));
            painter->drawLine(RECT.right() - (icon + text + F(6)), y, ar.right()+F(2), y);
        }
        c = FX::blend(FCOLOR(Window), FCOLOR(WindowText), MAX_STEPS - animStep, 1 + animStep);
    }

    if (!isEnabled) {
        RESTORE_PAINTER
        return;
    }

开发者ID:cazimi，项目名称:virtuality，代码行数:63，代码来源:input.cpp

示例4: F

 ~AutoPtr() {
   if (mPtr)
     F(mPtr);
 }

开发者ID:kenberland，项目名称:mozilla-gnome-keyring，代码行数:4，代码来源:GnomeKeyring.cpp

示例5: F

  { "-seed",   OPT_INT,     &seed,   "Seed for random parameters." },
  { "-points", OPT_INT,     &points, "Number of points to produce." },
  { "-f0",     OPT_DOUBLE,  &f0,     "Initial fish population." },
  { "-s0",     OPT_DOUBLE,  &s0,     "Initial shark population." },
  { "-a",      OPT_DOUBLE,  &a,      "Fish growth rate." },
  { "-b",      OPT_DOUBLE,  &b,      "Shark consumption rate." },
  { "-c",      OPT_DOUBLE,  &c,      "Fish nutritional value." },
  { "-d",      OPT_DOUBLE,  &d,      "Shark death rate." },
  { "-dt",     OPT_DOUBLE,  &dt,     "Time step increment." },
  { NULL,      OPT_NULL,    NULL,    NULL }
};

char help_string[] = "\
Integrates the two-species Lotka-Volterra predator-prey system, \
\
dF/dt = F(a - bS), dS/dt = S(cF - d), \
\
according to the specified parameters.\
";

/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */

/* The two differential equations to integrate. */

void myfunc(double x, double y, double *xx, double *yy)
{
  *xx = x * (a - b * y);
  *yy = y * (c * x - d);
}

/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */

开发者ID:Stray，项目名称:CBofN，代码行数:31，代码来源:lotka.c

示例6: errorPrint

//------------------------------------------------------------------------------
void SdFatBase::errorPrint(Print* pr, char const* msg) {
  pr->print(F("error: "));
  pr->println(msg);
  errorPrint(pr);
}

开发者ID:0x1abin，项目名称:Gamebuino，代码行数:6，代码来源:SdFat.cpp

示例7: open

/*
* Open for reading
*
* Returns true on success
*/
boolean SimpleConfig::open(boolean write)
{
  mlog.WARNING(F("SimpleConfig::base class called"));
  return false;
}

开发者ID:digitalfotografen，项目名称:Arduino-Thingspeak，代码行数:10，代码来源:SimpleConfig.cpp

示例8: close

/*
* Close file
*/
boolean SimpleConfig::close()
{
  mlog.WARNING(F("SimpleConfig::base class called"));
  // if writeMode, then remember to terminate file 
  return false;
}

开发者ID:digitalfotografen，项目名称:Arduino-Thingspeak，代码行数:9，代码来源:SimpleConfig.cpp

示例9: LAYOUT_65_ansi

   * ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
   * │ TAB │  Q  │  W  │  E  │  R  │  T  │  Y  │  U  │  I  │  O  │  P  │  [  │  ]  │  \  │█████│END  │
   * ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
   * │CAPSL│  A  │  S  │  D  │  F  │  G  │  H  │  J  │  K  │  L  │  ;  │  '  │▒▒▒▒▒│ENTER│█████│PG_UP│
   * ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
   * │LSHFT│▒▒▒▒▒│  Z  │  X  │  C  │  V  │  B  │  N  │  M  │  ,  │  .  │  /  │▒▒▒▒▒│RSHFT│ UP  │PG_DN│
   * ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
   * │LCTRL│L_ALT│L_GUI│█████│█████│█████│ SPC │█████│█████│█████│R_ALT│ FN0 │ APP │LEFT │DOWN │RIGHT│
   * └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
   */

  /* 0: ANSI qwerty */
  [_BL] = LAYOUT_65_ansi(
        KC_GESC,KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, \
        KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_END, \
        F(2),   KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT,       KC_ENT,     KC_PGUP, \
        KC_LSPO,     KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH,    KC_RSPC, KC_UP, KC_PGDN, \
        KC_LCTL, KC_LALT, KC_LGUI,            KC_SPC,            KC_RALT, MO(_FL), KC_RCTL, KC_LEFT, KC_DOWN, KC_RIGHT),


  /* 1: Locking arrow keys to WASD for when you need dedicated arrow keys
   *  ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
   *  │     │     │     │     │     │     │     │     │     │     │     │     │     │▒▒▒▒▒│▒▒▒▒▒│     │
   *  ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
   *  │     │     │ Up  │     │     │     │     │     │     │     │     │     │     │     │▒▒▒▒▒│     │
   *  ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
   *  │     │Left │Down │Right│     │     │     │     │     │     │     │     │▒▒▒▒▒│     │▒▒▒▒▒│     │
   *  ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
   *  │     │▒▒▒▒▒│     │     │     │     │     │     │     │     │     │     │▒▒▒▒▒│     │     │     │
   *  ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
   *  │     │     │     │█████│█████│█████│     │█████│█████│█████│     │     │     │     │     │     │

开发者ID:Depariel，项目名称:qmk_firmware，代码行数:31，代码来源:keymap.c

示例10: DATA_INTEGER

Type objective_function<Type>::operator() ()
{
  DATA_INTEGER(minAge);         
  DATA_INTEGER(maxAge);         
  DATA_INTEGER(minYear);        
  DATA_INTEGER(maxYear);        
  DATA_ARRAY(catchNo);        
  DATA_ARRAY(stockMeanWeight);
  DATA_ARRAY(propMature);     
  DATA_ARRAY(M);              
  DATA_INTEGER(minAgeS);        
  DATA_INTEGER(maxAgeS);        
  DATA_INTEGER(minYearS);       
  DATA_INTEGER(maxYearS);       
  DATA_SCALAR(surveyTime);     
  DATA_ARRAY(Q1);  

  PARAMETER_VECTOR(logN1Y);
  PARAMETER_VECTOR(logN1A);
  PARAMETER_VECTOR(logFY);
  PARAMETER_VECTOR(logFA);
  PARAMETER_VECTOR(logVarLogCatch);
  PARAMETER_VECTOR(logQ);
  PARAMETER(logVarLogSurvey);  

  int na=maxAge-minAge+1;
  int ny=maxYear-minYear+1;
  int nas=maxAgeS-minAgeS+1;
  int nys=maxYearS-minYearS+1;

  // setup F
  matrix<Type> F(ny,na);
  for(int y=0; y<ny; ++y){
    for(int a=0; a<na; ++a){
      F(y,a)=exp(logFY(y))*exp(logFA(a));
    }
  }
  // setup logN
  matrix<Type> logN(ny,na);
  for(int a=0; a<na; ++a){
    logN(0,a)=logN1Y(a);
  } 
  for(int y=1; y<ny; ++y){
    logN(y,0)=logN1A(y-1);
    for(int a=1; a<na; ++a){
      logN(y,a)=logN(y-1,a-1)-F(y-1,a-1)-M(y-1,a-1);
      if(a==(na-1)){
        logN(y,a)=log(exp(logN(y,a))+exp(logN(y,a-1)-F(y-1,a)-M(y-1,a)));
      }
    }
  }
  matrix<Type> predLogC(ny,na);
  for(int y=0; y<ny; ++y){
    for(int a=0; a<na; ++a){
      predLogC(y,a)=log(F(y,a))-log(F(y,a)+M(y,a))+log(Type(1.0)-exp(-F(y,a)-M(y,a)))+logN(y,a);
    }
  }

  Type ans=0; 
  for(int y=0; y<ny; ++y){
    for(int a=0; a<na; ++a){
      if(a==0){
        ans+= -dnorm(log(catchNo(y,a)),predLogC(y,a),exp(Type(0.5)*logVarLogCatch(0)),true);
      }else{
        ans+= -dnorm(log(catchNo(y,a)),predLogC(y,a),exp(Type(0.5)*logVarLogCatch(1)),true);
      }
    }
  }

  matrix<Type> predLogS(nys,nas);
  for(int y=0; y<nys; ++y){
    for(int a=0; a<nas; ++a){
			int sa        = a+(minAgeS-minAge);
			int sy        = y+(minYearS-minYear);
			predLogS(y,a) = logQ(a)-(F(sy,sa)+M(sy,sa))*surveyTime+logN(sy,sa);
			ans          += -dnorm(log(Q1(y,a)),predLogS(y,a),exp(Type(0.5)*logVarLogSurvey),true);
    }
  }

  vector<Type> ssb(ny);
  ssb.setZero();
  for(int y=0; y<=ny; ++y){
    for(int a=0; a<na; ++a){
    	std::cout<<y<<" "<<a<<" "<<"\n";
      ssb(y)+=exp(logN(y,a))*stockMeanWeight(y,a)*propMature(y,a);
    }
  }

  ADREPORT(ssb);
  return ans;
}

开发者ID:DanOvando，项目名称:Feb2016，代码行数:91，代码来源:poll.cpp

示例11: T

void T(void) {
	affiche_balise_ouvrante(__func__, TRACE_XML);
	F();
	Tprime();
	affiche_balise_fermante(__func__, TRACE_XML);
}

开发者ID:mschimek，项目名称:cours-compilation，代码行数:6，代码来源:analyseur_syntaxique_mini.c

示例12: ANSI_KEYMAP

   * ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
   * │ ESC │  1  │  2  │  3  │  4  │  5  │  6  │  7  │  8  │  9  │  0  │  -  │  =  │▒▒▒▒▒│BKSPC│DEL  │
   * ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
   * │ TAB │  Q  │  W  │  E  │  R  │  T  │  Y  │  U  │  I  │  O  │  P  │  [  │  ]  │  \  │█████│END  │
   * ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
   * │CAPSL│  A  │  S  │  D  │  F  │  G  │  H  │  J  │  K  │  L  │  ;  │  '  │▒▒▒▒▒│ENTER│█████│PG_UP│
   * ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
   * │LSHFT│▒▒▒▒▒│  Z  │  X  │  C  │  V  │  B  │  N  │  M  │  ,  │  .  │  /  │▒▒▒▒▒│RSHFT│ UP  │PG_DN│
   * ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
   * │LCTRL│L_ALT│L_GUI│█████│█████│█████│ SPC │█████│█████│█████│R_ALT│ FN0 │ APP │LEFT │DOWN │RIGHT│
   * └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
   */

  /* 0: ANSI qwerty */
  [_BL] = ANSI_KEYMAP(
        F(4),   KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, \
        KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_END, \
        F(2),   KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT,       KC_ENT,     KC_PGUP, \
        KC_LSFT,     KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH,    KC_RSFT, KC_UP, KC_PGDN, \
        KC_LCTL, KC_LALT, KC_LGUI,            KC_SPC,            KC_RALT, MO(_FL), KC_RCTL, KC_LEFT, KC_DOWN, KC_RIGHT),


  /* 1: Locking arrow keys to WASD for when you need dedicated arrow keys
   *  ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
   *  │     │     │     │     │     │     │     │     │     │     │     │     │     │▒▒▒▒▒│▒▒▒▒▒│     │
   *  ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
   *  │     │     │ Up  │     │     │     │     │     │     │     │     │     │     │     │▒▒▒▒▒│     │
   *  ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
   *  │     │Left │Down │Right│     │     │     │     │     │     │     │     │▒▒▒▒▒│     │▒▒▒▒▒│     │
   *  ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
   *  │     │▒▒▒▒▒│     │     │     │     │     │     │     │     │     │     │▒▒▒▒▒│     │     │     │

开发者ID:npoirey，项目名称:qmk_firmware，代码行数:31，代码来源:keymap.c

示例13: sendHandshake

void SocketIOClient::sendHandshake(char hostname[]) {
	client.println(F("GET /socket.io/1/ HTTP/1.1"));
	client.print(F("Host: "));
	client.println(hostname);
	client.println(F("Origin: Arduino\r\n"));
}

开发者ID:ApioLab，项目名称:Objects，代码行数:6，代码来源:SocketIOClient.cpp

示例14: PushCallStack

inline void
TrtrsmLLN
( UnitOrNonUnit diag, F alpha, const Matrix<F>& L, Matrix<F>& X,
  bool checkIfSingular )
{
#ifndef RELEASE
    PushCallStack("internal::TrtrsmLLN");
#endif
    // Matrix views
    Matrix<F> 
        LTL, LTR,  L00, L01, L02,
        LBL, LBR,  L10, L11, L12,
                   L20, L21, L22;
    Matrix<F> 
        XTL, XTR,  X00, X01, X02,
        XBL, XBR,  X10, X11, X12,
                   X20, X21, X22;

    Matrix<F> Z11;

    // Start the algorithm
    ScaleTrapezoid( alpha, LEFT, LOWER, 0, X );
    LockedPartitionDownDiagonal
    ( L, LTL, LTR,
         LBL, LBR, 0 );
    PartitionDownDiagonal
    ( X, XTL, XTR,
         XBL, XBR, 0 );
    while( XBR.Height() > 0 )
    {
        LockedRepartitionDownDiagonal
        ( LTL, /**/ LTR,  L00, /**/ L01, L02,
         /*************/ /******************/
               /**/       L10, /**/ L11, L12,
          LBL, /**/ LBR,  L20, /**/ L21, L22 );

        RepartitionDownDiagonal
        ( XTL, /**/ XTR,  X00, /**/ X01, X02,
         /*************/ /******************/
               /**/       X10, /**/ X11, X12,
          XBL, /**/ XBR,  X20, /**/ X21, X22 );

        //--------------------------------------------------------------------//
        Trsm( LEFT, LOWER, NORMAL, diag, F(1), L11, X10, checkIfSingular );
        TrtrsmLLNUnb( diag, F(1), L11, X11 );
        Gemm( NORMAL, NORMAL, F(-1), L21, X10, F(1), X20 );
        Z11 = X11;
        MakeTrapezoidal( LEFT, LOWER, 0, Z11 );
        Gemm( NORMAL, NORMAL, F(-1), L21, Z11, F(1), X21 );
        //--------------------------------------------------------------------//

        SlideLockedPartitionDownDiagonal
        ( LTL, /**/ LTR,  L00, L01, /**/ L02,
               /**/       L10, L11, /**/ L12, 
         /*************/ /******************/
          LBL, /**/ LBR,  L20, L21, /**/ L22 );

        SlidePartitionDownDiagonal
        ( XTL, /**/ XTR,  X00, X01, /**/ X02,
               /**/       X10, X11, /**/ X12, 
         /*************/ /******************/
          XBL, /**/ XBR,  X20, X21, /**/ X22 );
    }
#ifndef RELEASE
    PopCallStack();
#endif
}

开发者ID:jimgoo，项目名称:Elemental，代码行数:67，代码来源:LLN.hpp

示例15: readln

/*
* Read one null terminated line from file to buff
*
* Returns line length, NULL on failure
*/
int SimpleConfig::readln(char *buff, int maxlen)
{
  mlog.WARNING(F("SimpleConfig::base class called"));
  buff[0] = '\0';
  return NULL;
}

开发者ID:digitalfotografen，项目名称:Arduino-Thingspeak，代码行数:11，代码来源:SimpleConfig.cpp

示例16: main

int main(int argc, char **argv)
{

  int i, j, k, step=0, newlim;
  int runnum, detnum, regions, deg1, deg2, deg, limit1, limit2;
  double pol1[MAXDEG], pol2[MAXDEG], x1, x2, x3, f1, f2, t;
  char outfile[20];
  FILE *fi;
  FILE *fo;
  
  
  if (argc < 2) {
    printf("\nPINT v1.4 (Jan 2014) - ERROR:  .mcal file required as argument:\n\n");
    exit(0);
  }
  

      
  fi=fopen(argv[1], "r");
  sprintf(outfile, "pint_%s", argv[1]);
  fo=fopen(outfile, "wt");
  
  /// version 1.3
  int reg=0;
  int maxdeg[10]; //max 10 columns(regions)
  for (j=0; j<10; j++) maxdeg[j]=0;
  readMaxDeg(fi, maxdeg);
  fclose(fi);
  /// 
    
  for (j=0; j<MAXDEG; j++) { pol1[j]=0; pol2[j]=0; }
  
  fi=fopen(argv[1], "r");
  while (fscanf (fi, "%d %d %d %d", &runnum, &detnum, &regions, &deg1)==4) {
    
	
	reg=0;
	fprintf(fo, "%5d%5d%3d%5d", runnum, detnum, regions, deg1);
	for (k=0; k<deg1; k++) {
          fscanf (fi, "%lf", &pol1[k]);
	  if (k==0) fprintf(fo, "%9.3f", pol1[k]);
	  else if (k==1) fprintf(fo, "%10.6f", pol1[k]);
	  else fprintf(fo, "%15.6E", pol1[k]);
	  if (k==deg1-1) 
	  {
	    while(k+1<maxdeg[reg]) { fprintf(fo, "               "); k++;}      //v1.3
	    break;
	  }
	  
	}
	  
	fscanf (fi, "%d", &limit1);
	reg++;
	
	
    for (i=0; i<regions-1; i++) {
	  fscanf (fi, "%d", &deg2);
	  for (k=0; k<deg2; k++) fscanf (fi, "%lf", &pol2[k]);
	  fscanf (fi, "%d", &limit2);
	  
	  x1=limit1-RANGE;
	  x2=limit1+RANGE;
	  
	  if (deg1>deg2) deg=deg1;
	  else deg=deg2;
	  
	  int control=0;
      do {       // Secant method
        f1=F(x1, deg, pol1, pol2);
        f2=F(x2, deg, pol1, pol2);
        x3=x2-((f2*(x2-x1))/(f2-f1));
        x1=x2;
        x2=x3;
        if(f2<0)    t=fabs(f2);
        else    t=f2;
	control++;   //version 1.4
	if (control>10000000) {printf("Warning! Detector #%02d Regions %d-%d: Functions do not intersect.\n", detnum, i, i+1); break;}
        } while(t>EPS);
	  
	  
	  newlim=(x3+0.5);
	  
	  ///////////// v1.2 update
	  if (newlim<0) 
	  { 
	    newlim=0;
	    printf("\nWarning! Detector #%02d: First limit is %0.2lf. Returned 0 in the .mcal file", detnum, x3);	    
	  }
	  /////////////
	  
	  fprintf(fo, "%6d%5d", newlim, deg2); //x3 is the new limit
	  
	  limit1=limit2;
	  deg1=deg2;
	  for (j=0; j<MAXDEG; j++) pol1[j]=0;
	  for (k=0; k<deg2; k++) {
	    pol1[k]=pol2[k];
	    if (k==0) fprintf(fo, "%9.3f", pol2[k]);
	    else if (k==1) fprintf(fo, "%10.6f", pol2[k]);
	    else fprintf(fo, "%15.6E", pol2[k]);
//.........这里部分代码省略.........

开发者ID:pgramage，项目名称:gaspware，代码行数:101，代码来源:pint4.c

示例17: available

/* 
* Test if more characters are available
*/
boolean SimpleConfig::available()
{
  mlog.WARNING(F("SimpleConfig::base class called"));
  return false;
}

开发者ID:digitalfotografen，项目名称:Arduino-Thingspeak，代码行数:8，代码来源:SimpleConfig.cpp

示例18: __do_cpuid_ent

static inline int __do_cpuid_ent(struct kvm_cpuid_entry2 *entry, u32 function,
				 u32 index, int *nent, int maxnent)
{
	int r;
	unsigned f_nx = is_efer_nx() ? F(NX) : 0;
#ifdef CONFIG_X86_64
	unsigned f_gbpages = (kvm_x86_ops->get_lpage_level() == PT_PDPE_LEVEL)
				? F(GBPAGES) : 0;
	unsigned f_lm = F(LM);
#else
	unsigned f_gbpages = 0;
	unsigned f_lm = 0;
#endif
	unsigned f_rdtscp = kvm_x86_ops->rdtscp_supported() ? F(RDTSCP) : 0;
	unsigned f_invpcid = kvm_x86_ops->invpcid_supported() ? F(INVPCID) : 0;
	unsigned f_mpx = kvm_x86_ops->mpx_supported() ? F(MPX) : 0;

	/* cpuid 1.edx */
	const u32 kvm_supported_word0_x86_features =
		F(FPU) | F(VME) | F(DE) | F(PSE) |
		F(TSC) | F(MSR) | F(PAE) | F(MCE) |
		F(CX8) | F(APIC) | 0 /* Reserved */ | F(SEP) |
		F(MTRR) | F(PGE) | F(MCA) | F(CMOV) |
		F(PAT) | F(PSE36) | 0 /* PSN */ | F(CLFLUSH) |
		0 /* Reserved, DS, ACPI */ | F(MMX) |
		F(FXSR) | F(XMM) | F(XMM2) | F(SELFSNOOP) |
		0 /* HTT, TM, Reserved, PBE */;
	/* cpuid 0x80000001.edx */
	const u32 kvm_supported_word1_x86_features =
		F(FPU) | F(VME) | F(DE) | F(PSE) |
		F(TSC) | F(MSR) | F(PAE) | F(MCE) |
		F(CX8) | F(APIC) | 0 /* Reserved */ | F(SYSCALL) |
		F(MTRR) | F(PGE) | F(MCA) | F(CMOV) |
		F(PAT) | F(PSE36) | 0 /* Reserved */ |
		f_nx | 0 /* Reserved */ | F(MMXEXT) | F(MMX) |
		F(FXSR) | F(FXSR_OPT) | f_gbpages | f_rdtscp |
		0 /* Reserved */ | f_lm | F(3DNOWEXT) | F(3DNOW);
	/* cpuid 1.ecx */
	const u32 kvm_supported_word4_x86_features =
		/* NOTE: MONITOR (and MWAIT) are emulated as NOP,
		 * but *not* advertised to guests via CPUID ! */
		F(XMM3) | F(PCLMULQDQ) | 0 /* DTES64, MONITOR */ |
		0 /* DS-CPL, VMX, SMX, EST */ |
		0 /* TM2 */ | F(SSSE3) | 0 /* CNXT-ID */ | 0 /* Reserved */ |
		F(FMA) | F(CX16) | 0 /* xTPR Update, PDCM */ |
		F(PCID) | 0 /* Reserved, DCA */ | F(XMM4_1) |
		F(XMM4_2) | F(X2APIC) | F(MOVBE) | F(POPCNT) |
		0 /* Reserved*/ | F(AES) | F(XSAVE) | 0 /* OSXSAVE */ | F(AVX) |
		F(F16C) | F(RDRAND);
	/* cpuid 0x80000001.ecx */
	const u32 kvm_supported_word6_x86_features =
		F(LAHF_LM) | F(CMP_LEGACY) | 0 /*SVM*/ | 0 /* ExtApicSpace */ |
		F(CR8_LEGACY) | F(ABM) | F(SSE4A) | F(MISALIGNSSE) |
		F(3DNOWPREFETCH) | F(OSVW) | 0 /* IBS */ | F(XOP) |
		0 /* SKINIT, WDT, LWP */ | F(FMA4) | F(TBM);

	/* cpuid 0xC0000001.edx */
	const u32 kvm_supported_word5_x86_features =
		F(XSTORE) | F(XSTORE_EN) | F(XCRYPT) | F(XCRYPT_EN) |
		F(ACE2) | F(ACE2_EN) | F(PHE) | F(PHE_EN) |
		F(PMM) | F(PMM_EN);

	/* cpuid 7.0.ebx */
	const u32 kvm_supported_word9_x86_features =
		F(FSGSBASE) | F(BMI1) | F(HLE) | F(AVX2) | F(SMEP) |
		F(BMI2) | F(ERMS) | f_invpcid | F(RTM) | f_mpx | F(RDSEED) |
		F(ADX) | F(SMAP);

	/* all calls to cpuid_count() should be made on the same cpu */
	get_cpu();

	r = -E2BIG;

	if (*nent >= maxnent)
		goto out;

	do_cpuid_1_ent(entry, function, index);
	++*nent;

	switch (function) {
	case 0:
		entry->eax = min(entry->eax, (u32)0xd);
		break;
	case 1:
		entry->edx &= kvm_supported_word0_x86_features;
		cpuid_mask(&entry->edx, 0);
		entry->ecx &= kvm_supported_word4_x86_features;
		cpuid_mask(&entry->ecx, 4);
		/* we support x2apic emulation even if host does not support
		 * it since we emulate x2apic in software */
		entry->ecx |= F(X2APIC);
		break;
	/* function 2 entries are STATEFUL. That is, repeated cpuid commands
	 * may return different values. This forces us to get_cpu() before
	 * issuing the first command, and also to emulate this annoying behavior
	 * in kvm_emulate_cpuid() using KVM_CPUID_FLAG_STATE_READ_NEXT */
	case 2: {
		int t, times = entry->eax & 0xff;

		entry->flags |= KVM_CPUID_FLAG_STATEFUL_FUNC;
//.........这里部分代码省略.........

开发者ID:1800alex，项目名称:linux，代码行数:101，代码来源:cpuid.c

示例19: writeln

int SimpleConfig::writeln(const char *buff, int maxlen){
  mlog.WARNING(F("SimpleConfig::base class called"));
  return 0;
}

开发者ID:digitalfotografen，项目名称:Arduino-Thingspeak，代码行数:4，代码来源:SimpleConfig.cpp

示例20: debugDefaultKey

void SimpleConfig::debugDefaultKey(const char *key, const char* group){
  mlog.DEBUG(F("Default config key:"));
  mlog.DEBUG(key, false);
  mlog.DEBUG(F(" group:"), false);
  mlog.DEBUG(group, false);
}

开发者ID:digitalfotografen，项目名称:Arduino-Thingspeak，代码行数:6，代码来源:SimpleConfig.cpp

注：本文中的F函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ F2函数代码示例发布时间：2022-05-30

C++ EyePosition函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19170|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9982|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8322|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8691|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8635|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9651|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8618|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7995|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8649|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7532|2022-11-06

客服电话

电子邮件

C++ F函数代码示例

示例1: parseFileName

示例2: F

示例3: ASSURE_OPTION

示例4: F

示例5: F

示例6: errorPrint

示例7: open

示例8: close

示例9: LAYOUT_65_ansi

示例10: DATA_INTEGER

示例11: T

示例12: ANSI_KEYMAP

示例13: sendHandshake

示例14: PushCallStack

示例15: readln

示例16: main

示例17: available

示例18: __do_cpuid_ent

示例19: writeln

示例20: debugDefaultKey

请发表评论

全部评论

上一篇：

下一篇：

CVE-2022-32051

xorrior/macOSTools: macOS Offensive Tool

caseypugh/minecraft: Some scripts to mak

Testinium/MobileDeviceInfo

xsfelvis/MaterialDesignStudy: A practic

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053