本文整理汇总了C++中EVP_aes_128_ecb函数的典型用法代码示例。如果您正苦于以下问题：C++ EVP_aes_128_ecb函数的具体用法？C++ EVP_aes_128_ecb怎么用？C++ EVP_aes_128_ecb使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了EVP_aes_128_ecb函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: aes_ctr_init
static int
aes_ctr_init(archive_crypto_ctx *ctx, const uint8_t *key, size_t key_len)
{
if ((ctx->ctx = EVP_CIPHER_CTX_new()) == NULL)
return -1;
switch (key_len) {
case 16: ctx->type = EVP_aes_128_ecb(); break;
case 24: ctx->type = EVP_aes_192_ecb(); break;
case 32: ctx->type = EVP_aes_256_ecb(); break;
default: ctx->type = NULL; return -1;
}
ctx->key_len = key_len;
memcpy(ctx->key, key, key_len);
memset(ctx->nonce, 0, sizeof(ctx->nonce));
ctx->encr_pos = AES_BLOCK_SIZE;
#if OPENSSL_VERSION_NUMBER >= 0x10100000L && !defined(LIBRESSL_VERSION_NUMBER)
if (!EVP_CIPHER_CTX_reset(ctx->ctx)) {
EVP_CIPHER_CTX_free(ctx->ctx);
ctx->ctx = NULL;
}
#else
EVP_CIPHER_CTX_init(ctx->ctx);
#endif
return 0;
}
开发者ID:Bebere，项目名称:libarchive，代码行数:27，代码来源:archive_cryptor.c
示例2: EVP_aes_128_cbc
const EVP_CIPHER *OpensslAES::getEvpCipher() const
{
if (m_type == TypeAes128 && m_mode == ModeCbc) {
return EVP_aes_128_cbc();
} else if (m_type == TypeAes128 && m_mode == ModeCfb) {
return EVP_aes_128_cfb128();
} else if (m_type == TypeAes128 && m_mode == ModeEcb) {
return EVP_aes_128_ecb();
} else if (m_type == TypeAes128 && m_mode == ModeOfb) {
return EVP_aes_128_ofb();
} else if (m_type == TypeAes192 && m_mode == ModeCbc) {
return EVP_aes_192_cbc();
} else if (m_type == TypeAes192 && m_mode == ModeCfb) {
return EVP_aes_192_cfb128();
} else if (m_type == TypeAes192 && m_mode == ModeEcb) {
return EVP_aes_192_ecb();
} else if (m_type == TypeAes192 && m_mode == ModeOfb) {
return EVP_aes_192_ofb();
} else if (m_type == TypeAes256 && m_mode == ModeCbc) {
return EVP_aes_256_cbc();
} else if (m_type == TypeAes256 && m_mode == ModeCfb) {
return EVP_aes_256_cfb128();
} else if (m_type == TypeAes256 && m_mode == ModeEcb) {
return EVP_aes_256_ecb();
} else if (m_type == TypeAes256 && m_mode == ModeOfb) {
return EVP_aes_256_ofb();
}
return 0;
}
开发者ID:dushibaiyu，项目名称:QSocket5Tunnel，代码行数:30，代码来源:opensslaes.cpp
示例3: seafile_decrypt_init
int
seafile_decrypt_init (EVP_CIPHER_CTX *ctx,
int version,
const unsigned char *key,
const unsigned char *iv)
{
int ret;
/* Prepare CTX for decryption. */
EVP_CIPHER_CTX_init (ctx);
if (version >= 1)
ret = EVP_DecryptInit_ex (ctx,
EVP_aes_128_cbc(), /* cipher mode */
NULL, /* engine, NULL for default */
key, /* derived key */
iv); /* initial vector */
else
ret = EVP_DecryptInit_ex (ctx,
EVP_aes_128_ecb(), /* cipher mode */
NULL, /* engine, NULL for default */
key, /* derived key */
iv); /* initial vector */
if (ret == DEC_FAILURE)
return -1;
return 0;
}
开发者ID:2bj，项目名称:seafile，代码行数:29，代码来源:seafile-crypt.c
示例4: ossl_aes_ecb_init
static int
ossl_aes_ecb_init(PX_Cipher *c, const uint8 *key, unsigned klen, const uint8 *iv)
{
ossldata *od = c->ptr;
int err;
err = ossl_aes_init(c, key, klen, iv);
if (err)
return err;
switch (od->klen)
{
case 128 / 8:
od->evp_ciph = EVP_aes_128_ecb();
break;
case 192 / 8:
od->evp_ciph = EVP_aes_192_ecb();
break;
case 256 / 8:
od->evp_ciph = EVP_aes_256_ecb();
break;
default:
/* shouldn't happen */
err = PXE_CIPHER_INIT;
break;
}
return err;
}
开发者ID:cconvey，项目名称:postgres，代码行数:29，代码来源:openssl.c
示例5: MissingParameterException
/** Decrypt.
* Do the decryption.
* @return size of the plain text message.
*/
size_t
WorldInfoMessageDecryptor::decrypt()
{
if ( (plain_buffer == NULL) || (plain_buffer_length == 0) ||
(crypt_buffer == NULL) || (crypt_buffer_length == 0) ) {
throw MissingParameterException("Buffer(s) not set for decryption");
}
#ifdef HAVE_LIBCRYPTO
EVP_CIPHER_CTX ctx;
if ( ! EVP_DecryptInit(&ctx, EVP_aes_128_ecb(), key, iv) ) {
throw MessageDecryptionException("Could not initialize cipher context");
}
int outl = plain_buffer_length;
if ( ! EVP_DecryptUpdate(&ctx,
(unsigned char *)plain_buffer, &outl,
(unsigned char *)crypt_buffer, crypt_buffer_length) ) {
throw MessageDecryptionException("DecryptUpdate failed");
}
int plen = 0;
if ( ! EVP_DecryptFinal(&ctx, (unsigned char *)plain_buffer + outl, &plen) ) {
throw MessageDecryptionException("DecryptFinal failed");
}
outl += plen;
return outl;
#else
// Plain-text copy-through for debugging.
memcpy(plain_buffer, crypt_buffer, crypt_buffer_length);
return crypt_buffer_length;
#endif
}
开发者ID:fuxiang90，项目名称:fawkes，代码行数:38，代码来源:decrypt.cpp
示例6: problem07
std::string problem07() {
std::ifstream instream;
instream.open(rootdir + "res/p7.txt", std::ios::in);
if (!instream.is_open()) {
std::cerr << "Can't open p7.txt\n";
return std::string("p07 failed.\n");
}
std::string in{};
std::string line;
while(std::getline(instream, line)) {
in += line;
}
BinaryBlob b7 = BinaryBlob(in, 64);
int num_bytes = b7.size();
int act_num_bytes = 0, tot_bytes = 0;
unsigned char key[] = "YELLOW SUBMARINE";
EVP_CIPHER_CTX* my_cipher_ctx = EVP_CIPHER_CTX_new();
EVP_DecryptInit_ex(my_cipher_ctx, EVP_aes_128_ecb(), NULL, key, NULL);
unsigned char* out = (unsigned char *) malloc(num_bytes * 2 + EVP_CIPHER_CTX_block_size(my_cipher_ctx));
if (!out)
return "p7 - OOM\n";
EVP_DecryptUpdate(my_cipher_ctx, out, &act_num_bytes, b7.getRawBuf(), num_bytes);
tot_bytes += act_num_bytes;
EVP_DecryptFinal_ex(my_cipher_ctx, out + act_num_bytes, &act_num_bytes);
tot_bytes += act_num_bytes;
EVP_CIPHER_CTX_free(my_cipher_ctx);
BinaryBlob s7 = BinaryBlob(out, tot_bytes);
return s7.ascii();
}
开发者ID:dcashman，项目名称:cryptopals，代码行数:29，代码来源:matasano_set01.cpp
示例7: XCBC_Init
int
XCBC_Init(XCBC_CTX *xctx,
const uint8_t const *k)
{
int bl, outl;
EVP_CIPHER_CTX *ctx;
uint8_t k1[XCBC_MAX_BLOCK_LENGTH];
ctx = xctx->ctx;
EVP_CIPHER_CTX_init(ctx);
OPENSSL_try(EVP_CipherInit_ex(ctx, EVP_aes_128_ecb(), NULL, k, NULL, 1),
"cipher init error", return0);
bl = EVP_CIPHER_CTX_block_size((const EVP_CIPHER_CTX *)ctx);
OPENSSL_try(EVP_CipherUpdate(ctx, k1, &outl, ks1, bl),
"cipher update error (k1)", return0);
OPENSSL_try(EVP_CipherUpdate(ctx, xctx->k2, &outl, ks2, bl),
"cipher update error (k2)", return0);
OPENSSL_try(EVP_CipherUpdate(ctx, xctx->k3, &outl, ks3, bl),
"cipher update error (k3)", return0);
OPENSSL_try(EVP_CipherInit_ex(ctx, NULL, NULL, k1, NULL, -1),
"cipher reset error", return0);
memset(xctx->e, 0, bl);
xctx->size = 0;
return 1;
return0:
return 0;
}
开发者ID:grivet，项目名称:XCBC，代码行数:31，代码来源:xcbc.c
示例8: EVP_CIPHER_CTX_new
ndn_Error
ndn_AesAlgorithm_decrypt128Ecb
(const uint8_t *key, size_t keyLength, const uint8_t *encryptedData,
size_t encryptedDataLength, uint8_t *plainData, size_t *plainDataLength)
{
EVP_CIPHER_CTX *ctx;
int outLength1, outLength2;
if (keyLength != ndn_AES_128_BLOCK_SIZE)
return NDN_ERROR_Incorrect_key_size;
ctx = EVP_CIPHER_CTX_new();
if (!ctx)
return NDN_ERROR_Error_in_decrypt_operation;
EVP_DecryptInit(ctx, EVP_aes_128_ecb(), (const unsigned char*)key, 0);
EVP_DecryptUpdate
(ctx, (unsigned char*)plainData, &outLength1,
(const unsigned char*)encryptedData, encryptedDataLength);
EVP_DecryptFinal
(ctx, (unsigned char*)plainData + outLength1, &outLength2);
EVP_CIPHER_CTX_free(ctx);
*plainDataLength = outLength1 + outLength2;
return NDN_ERROR_success;
}
开发者ID:yoursunny，项目名称:esp8266ndn，代码行数:28，代码来源:aes-algorithm_c.c
示例9: aes_128_encrypt_block
static inline int aes_128_encrypt_block(EVP_CIPHER_CTX *evp_ctx,
uint8_t const key[16], uint8_t const in[16], uint8_t out[16])
{
size_t len;
if (unlikely(EVP_EncryptInit_ex(evp_ctx, EVP_aes_128_ecb(), NULL, key, NULL) != 1)) {
tls_strerror_printf("Failed initialising AES-128-ECB context");
return -1;
}
/*
* By default OpenSSL will try and pad out a 16 byte
* plaintext to 32 bytes so that it's detectable that
* there was padding.
*
* In this case we know the length of the plaintext
* we're trying to recover, so we explicitly tell
* OpenSSL not to pad here, and not to expected padding
* when decrypting.
*/
EVP_CIPHER_CTX_set_padding(evp_ctx, 0);
if (unlikely(EVP_EncryptUpdate(evp_ctx, out, (int *)&len, in, 16) != 1) ||
unlikely(EVP_EncryptFinal_ex(evp_ctx, out + len, (int *)&len) != 1)) {
tls_strerror_printf("Failed encrypting data");
return -1;
}
return 0;
}
开发者ID:mcnewton，项目名称:freeradius-server，代码行数:29，代码来源:milenage.c
示例10: aesEncrypt
static int aesEncrypt(char* input, int inlen, char* output, int* outlen) {
int c_len; //length of ciphertext
int f_len; //rest length of padded ciphertext
EVP_CIPHER_CTX ctx;
if (input == NULL || inlen <= 0 || output == NULL || *outlen <= 0) {
return -1;
}
EVP_CIPHER_CTX_init(&ctx);
if (EVP_EncryptInit_ex(&ctx, EVP_aes_128_ecb(), NULL, key, NULL) != 1) {
return -2;
}
if (EVP_EncryptUpdate(&ctx, (unsigned char*)output, &c_len, (const unsigned char*)input,
inlen) != 1) {
return -3;
}
if (EVP_EncryptFinal_ex(&ctx, (unsigned char*)(output + c_len), &f_len) != 1) {
return -4;
}
EVP_CIPHER_CTX_cleanup(&ctx);
*outlen = c_len + f_len;
return 0;
}
开发者ID:cumirror，项目名称:epoll_example，代码行数:29，代码来源:coding.c
示例11: mp4_aes_ctr_init
vod_status_t
mp4_aes_ctr_init(
mp4_aes_ctr_state_t* state,
request_context_t* request_context,
u_char* key)
{
vod_pool_cleanup_t *cln;
state->request_context = request_context;
cln = vod_pool_cleanup_add(request_context->pool, 0);
if (cln == NULL)
{
vod_log_debug0(VOD_LOG_DEBUG_LEVEL, request_context->log, 0,
"mp4_aes_ctr_init: vod_pool_cleanup_add failed");
return VOD_ALLOC_FAILED;
}
cln->handler = (vod_pool_cleanup_pt)mp4_aes_ctr_cleanup;
cln->data = state;
EVP_CIPHER_CTX_init(&state->cipher);
if (1 != EVP_EncryptInit_ex(&state->cipher, EVP_aes_128_ecb(), NULL, key, NULL))
{
vod_log_error(VOD_LOG_ERR, request_context->log, 0,
"mp4_aes_ctr_init: EVP_EncryptInit_ex failed");
return VOD_ALLOC_FAILED;
}
return VOD_OK;
}
开发者ID:Boburjon，项目名称:nginx-vod-module，代码行数:32，代码来源:mp4_aes_ctr.c
示例12: aes_f8_session_key_init
static int aes_f8_session_key_init(struct crypto_context *c) {
unsigned char m[16];
int i;
int k_e_len, k_s_len; /* n_e, n_s */
unsigned char *key;
aes_cm_session_key_init(c);
k_e_len = c->crypto_suite->session_key_len;
k_s_len = c->crypto_suite->session_salt_len;
key = (unsigned char *) c->session_key;
/* m = k_s || 0x555..5 */
memcpy(m, c->session_salt, k_s_len);
for (i = k_s_len; i < k_e_len; i++)
m[i] = 0x55;
/* IV' = E(k_e XOR m, IV) */
for (i = 0; i < k_e_len; i++)
m[i] ^= key[i];
c->session_key_ctx[1] = g_slice_alloc(sizeof(EVP_CIPHER_CTX));
EVP_CIPHER_CTX_init(c->session_key_ctx[1]);
EVP_EncryptInit_ex(c->session_key_ctx[1], EVP_aes_128_ecb(), NULL, m, NULL);
return 0;
}
开发者ID:SibghatullahSheikh，项目名称:mediaproxy-ng，代码行数:26，代码来源:crypto.c
示例13: aes_set_key
/** Set the key of <b>cipher</b> to <b>key</b>, which is
* <b>key_bits</b> bits long (must be 128, 192, or 256). Also resets
* the counter to 0.
*/
static void
aes_set_key(aes_cnt_cipher_t *cipher, const char *key, int key_bits)
{
if (should_use_EVP) {
const EVP_CIPHER *c = 0;
switch (key_bits) {
case 128: c = EVP_aes_128_ecb(); break;
case 192: c = EVP_aes_192_ecb(); break;
case 256: c = EVP_aes_256_ecb(); break;
default: tor_assert(0);
}
EVP_EncryptInit(&cipher->key.evp, c, (const unsigned char*)key, NULL);
cipher->using_evp = 1;
} else {
AES_set_encrypt_key((const unsigned char *)key, key_bits,&cipher->key.aes);
cipher->using_evp = 0;
}
#ifdef USING_COUNTER_VARS
cipher->counter0 = 0;
cipher->counter1 = 0;
cipher->counter2 = 0;
cipher->counter3 = 0;
#endif
memset(cipher->ctr_buf.buf, 0, sizeof(cipher->ctr_buf.buf));
cipher->pos = 0;
memset(cipher->buf, 0, sizeof(cipher->buf));
}
开发者ID:themiron，项目名称:asuswrt-merlin，代码行数:35，代码来源:aes.c
示例14: seafile_derive_key
int
seafile_derive_key (const char *data_in, int in_len, int version,
unsigned char *key, unsigned char *iv)
{
if (version == 2) {
PKCS5_PBKDF2_HMAC (data_in, in_len,
salt, sizeof(salt),
KEYGEN_ITERATION2,
EVP_sha256(),
32, key);
PKCS5_PBKDF2_HMAC ((char *)key, 32,
salt, sizeof(salt),
10,
EVP_sha256(),
16, iv);
return 0;
} else if (version == 1)
return EVP_BytesToKey (EVP_aes_128_cbc(), /* cipher mode */
EVP_sha1(), /* message digest */
salt, /* salt */
(unsigned char*)data_in,
in_len,
KEYGEN_ITERATION, /* iteration times */
key, /* the derived key */
iv); /* IV, initial vector */
else
return EVP_BytesToKey (EVP_aes_128_ecb(), /* cipher mode */
EVP_sha1(), /* message digest */
NULL, /* salt */
(unsigned char*)data_in,
in_len,
3, /* iteration times */
key, /* the derived key */
iv); /* IV, initial vector */
}
开发者ID:Danath，项目名称:seafile，代码行数:35，代码来源:seafile-crypt.c
示例15: get_cipher_type
const EVP_CIPHER* get_cipher_type(const enum cipher cipher, const enum cipher_mode mode) {
switch (mode) {
case MODE_ECB:
switch (cipher) {
case CIPHER_DES:
return EVP_des_ecb();
case CIPHER_AES_128:
return EVP_aes_128_ecb();
case CIPHER_AES_192:
return EVP_aes_192_ecb();
case CIPHER_AES_256:
return EVP_aes_256_ecb();
}
case MODE_CBC:
switch (cipher) {
case CIPHER_DES:
return EVP_des_cbc();
case CIPHER_AES_128:
return EVP_aes_128_cbc();
case CIPHER_AES_192:
return EVP_aes_192_cbc();
case CIPHER_AES_256:
return EVP_aes_256_cbc();
}
case MODE_OFB:
switch (cipher) {
case CIPHER_DES:
return EVP_des_ofb();
case CIPHER_AES_128:
return EVP_aes_128_ofb();
case CIPHER_AES_192:
return EVP_aes_192_ofb();
case CIPHER_AES_256:
return EVP_aes_256_ofb();
}
case MODE_CFB:
switch (cipher) {
case CIPHER_DES:
return EVP_des_cfb();
case CIPHER_AES_128:
return EVP_aes_128_cfb();
case CIPHER_AES_192:
return EVP_aes_192_cfb();
case CIPHER_AES_256:
return EVP_aes_256_cfb();
}
}
abort();
}
开发者ID:acrespo，项目名称:cripto-2013-1c，代码行数:58，代码来源:crypt.c
示例16: aes_ctr_init
static int
aes_ctr_init(EVP_CIPHER_CTX *ctx, const unsigned char *key,
const unsigned char *iv, int enc) /* init key */
{
/*
* variable "c" is leaked from this scope, but is later freed
* in aes_ctr_cleanup
*/
aes_ctr_ctx *c;
const EVP_CIPHER *aes_cipher;
(void) enc;
switch(EVP_CIPHER_CTX_key_length(ctx)) {
case 16:
aes_cipher = EVP_aes_128_ecb();
break;
case 24:
aes_cipher = EVP_aes_192_ecb();
break;
case 32:
aes_cipher = EVP_aes_256_ecb();
break;
default:
return 0;
}
c = malloc(sizeof(*c));
if(c == NULL)
return 0;
#ifdef HAVE_OPAQUE_STRUCTS
c->aes_ctx = EVP_CIPHER_CTX_new();
#else
c->aes_ctx = malloc(sizeof(EVP_CIPHER_CTX));
#endif
if(c->aes_ctx == NULL) {
free(c);
return 0;
}
if(EVP_EncryptInit(c->aes_ctx, aes_cipher, key, NULL) != 1) {
#ifdef HAVE_OPAQUE_STRUCTS
EVP_CIPHER_CTX_free(c->aes_ctx);
#else
free(c->aes_ctx);
#endif
free(c);
return 0;
}
EVP_CIPHER_CTX_set_padding(c->aes_ctx, 0);
memcpy(c->ctr, iv, AES_BLOCK_SIZE);
EVP_CIPHER_CTX_set_app_data(ctx, c);
return 1;
}
开发者ID:stinb，项目名称:libssh2，代码行数:58，代码来源:openssl.c
示例17: aes_cm_session_key_init
static int aes_cm_session_key_init(struct crypto_context *c) {
evp_session_key_cleanup(c);
c->session_key_ctx[0] = g_slice_alloc(sizeof(EVP_CIPHER_CTX));
EVP_CIPHER_CTX_init(c->session_key_ctx[0]);
EVP_EncryptInit_ex(c->session_key_ctx[0], EVP_aes_128_ecb(), NULL,
(unsigned char *) c->session_key, NULL);
return 0;
}
开发者ID:SibghatullahSheikh，项目名称:mediaproxy-ng，代码行数:9，代码来源:crypto.c
示例18: aes_ctr_128_no_ctx
static void aes_ctr_128_no_ctx(char *out, str *in, const char *key, const char *iv) {
EVP_CIPHER_CTX ctx;
unsigned char block[16];
int len;
EVP_CIPHER_CTX_init(&ctx);
EVP_EncryptInit_ex(&ctx, EVP_aes_128_ecb(), NULL, (const unsigned char *) key, NULL);
aes_ctr_128(out, in, &ctx, iv);
EVP_EncryptFinal_ex(&ctx, block, &len);
EVP_CIPHER_CTX_cleanup(&ctx);
}
开发者ID:SibghatullahSheikh，项目名称:mediaproxy-ng，代码行数:11，代码来源:crypto.c
示例19: EVP_CIPHER_do_all_sorted
void EVP_CIPHER_do_all_sorted(void (*callback)(const EVP_CIPHER *cipher,
const char *name,
const char *unused, void *arg),
void *arg) {
callback(EVP_aes_128_cbc(), "AES-128-CBC", NULL, arg);
callback(EVP_aes_128_ctr(), "AES-128-CTR", NULL, arg);
callback(EVP_aes_128_ecb(), "AES-128-ECB", NULL, arg);
callback(EVP_aes_128_ofb(), "AES-128-OFB", NULL, arg);
callback(EVP_aes_256_cbc(), "AES-256-CBC", NULL, arg);
callback(EVP_aes_256_ctr(), "AES-256-CTR", NULL, arg);
callback(EVP_aes_256_ecb(), "AES-256-ECB", NULL, arg);
callback(EVP_aes_256_ofb(), "AES-256-OFB", NULL, arg);
callback(EVP_aes_256_xts(), "AES-256-XTS", NULL, arg);
callback(EVP_des_cbc(), "DES-CBC", NULL, arg);
callback(EVP_des_ecb(), "DES-ECB", NULL, arg);
callback(EVP_des_ede(), "DES-EDE", NULL, arg);
callback(EVP_des_ede_cbc(), "DES-EDE-CBC", NULL, arg);
callback(EVP_des_ede3_cbc(), "DES-EDE3-CBC", NULL, arg);
callback(EVP_rc2_cbc(), "RC2-CBC", NULL, arg);
callback(EVP_rc4(), "RC4", NULL, arg);
// OpenSSL returns everything twice, the second time in lower case.
callback(EVP_aes_128_cbc(), "aes-128-cbc", NULL, arg);
callback(EVP_aes_128_ctr(), "aes-128-ctr", NULL, arg);
callback(EVP_aes_128_ecb(), "aes-128-ecb", NULL, arg);
callback(EVP_aes_128_ofb(), "aes-128-ofb", NULL, arg);
callback(EVP_aes_256_cbc(), "aes-256-cbc", NULL, arg);
callback(EVP_aes_256_ctr(), "aes-256-ctr", NULL, arg);
callback(EVP_aes_256_ecb(), "aes-256-ecb", NULL, arg);
callback(EVP_aes_256_ofb(), "aes-256-ofb", NULL, arg);
callback(EVP_aes_256_xts(), "aes-256-xts", NULL, arg);
callback(EVP_des_cbc(), "des-cbc", NULL, arg);
callback(EVP_des_ecb(), "des-ecb", NULL, arg);
callback(EVP_des_ede(), "des-ede", NULL, arg);
callback(EVP_des_ede_cbc(), "des-ede-cbc", NULL, arg);
callback(EVP_des_ede3_cbc(), "des-ede3-cbc", NULL, arg);
callback(EVP_rc2_cbc(), "rc2-cbc", NULL, arg);
callback(EVP_rc4(), "rc4", NULL, arg);
}
开发者ID:0x64616E69656C，项目名称:boringssl，代码行数:39，代码来源:evp_do_all.c
示例20: FIPS_aes_test
/* AES: encrypt and decrypt known plaintext, verify result matches original plaintext
*/
static int FIPS_aes_test(void)
{
int ret = 0;
unsigned char pltmp[16];
unsigned char citmp[16];
unsigned char key[16] = { 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16};
unsigned char plaintext[16] = "etaonrishdlcu";
EVP_CIPHER_CTX ctx;
FIPS_cipher_ctx_init(&ctx);
if (FIPS_cipherinit(&ctx, EVP_aes_128_ecb(), key, NULL, 1) <= 0)
goto err;
FIPS_cipher(&ctx, citmp, plaintext, 16);
if (FIPS_cipherinit(&ctx, EVP_aes_128_ecb(), key, NULL, 0) <= 0)
goto err;
FIPS_cipher(&ctx, pltmp, citmp, 16);
if (memcmp(pltmp, plaintext, 16))
goto err;
ret = 1;
err:
FIPS_cipher_ctx_cleanup(&ctx);
return ret;
}
开发者ID:leloulight，项目名称:eme，代码行数:24，代码来源:fips_test_suite.c
注：本文中的EVP_aes_128_ecb函数示例整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。 |
客服电话
APP下载
官方微信
请发表评论