C++ EVP_aes_128_cbc函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中EVP_aes_128_cbc函数的典型用法代码示例。如果您正苦于以下问题：C++ EVP_aes_128_cbc函数的具体用法？C++ EVP_aes_128_cbc怎么用？C++ EVP_aes_128_cbc使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了EVP_aes_128_cbc函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: decrypt_token

static int
decrypt_token (CcnetProcessor *processor)
{
    USE_PRIV;
    int hex_len, encrypted_len, token_len; 
    char *encrypted_token = NULL;
    SeafileCrypt *crypt = NULL;
    unsigned char key[16], iv[16];
    char *token = NULL;
    int ret = 0;

    /* raw data is half the length of hexidecimal */
    hex_len = strlen(priv->token);
    if (hex_len % 2 != 0) {
        seaf_warning ("[check tx slave v3] invalid length of encrypted token\n"); 
        ret = -1;
        goto out;
    }

    encrypted_len = hex_len / 2;
    encrypted_token = g_malloc (encrypted_len);
    hex_to_rawdata (priv->token,
                    (unsigned char *)encrypted_token,
                    encrypted_len);

    EVP_BytesToKey (EVP_aes_128_cbc(), /* cipher mode */
                    EVP_sha1(),        /* message digest */
                    NULL,              /* slat */
                    (unsigned char*)priv->session_key,
                    strlen(priv->session_key),
                    1,   /* iteration times */
                    key, /* the derived key */
                    iv); /* IV, initial vector */

    crypt = seafile_crypt_new (1, key, iv);
    
    if (seafile_decrypt (&token, &token_len, encrypted_token,
                         encrypted_len, crypt) < 0) {
        seaf_warning ("[check tx slave v3] failed to decrypt token\n");
        ret = -1;
        goto out;
    }

    g_free (priv->token);
    /* we can use the decrypted data directly, since the trailing null byte is
     * also included when encrypting in the client */
    priv->token = token;

out:
    g_free (crypt);
    g_free (encrypted_token);
    
    return ret;
}

开发者ID:90songjian，项目名称:seafile，代码行数:54，代码来源:check-tx-slave-v3-proc.c

示例2: typeToCIPHER

static const EVP_CIPHER * typeToCIPHER(Cipher::Type t)
{
	if(t == Cipher::TripleDES)
		return EVP_des_ede3_cbc();
	else if(t == Cipher::AES_128)
		return EVP_aes_128_cbc();
	else if(t == Cipher::AES_256)
		return EVP_aes_256_cbc();
	else
		return 0;
}

开发者ID:psi-im，项目名称:cutestuff，代码行数:11，代码来源:cipher.cpp

示例3: cipher_by_name

static const EVP_CIPHER* cipher_by_name(const char *name) {
  if (strcmp(name, "DES-CBC") == 0) {
    return EVP_des_cbc();
  } else if (strcmp(name, "AES-128-CBC") == 0) {
    return EVP_aes_128_cbc();
  } else if (strcmp(name,  "AES-256-CBC") == 0) {
    return EVP_aes_256_cbc();
  } else {
    return NULL;
  }
}

开发者ID:RobinWuDev，项目名称:Qt，代码行数:11，代码来源:pem_lib.c

示例4: _wi_cipher_cipher

static const EVP_CIPHER * _wi_cipher_cipher(wi_cipher_t *cipher) {
	switch(cipher->type) {
		case WI_CIPHER_AES128:		return EVP_aes_128_cbc();
		case WI_CIPHER_AES192:		return EVP_aes_192_cbc();
		case WI_CIPHER_AES256:		return EVP_aes_256_cbc();
		case WI_CIPHER_BF128:		return EVP_bf_cbc();
		case WI_CIPHER_3DES192:		return EVP_des_ede3_cbc();
	}
	
	return NULL;
}

开发者ID:ProfDrLuigi，项目名称:zanka，代码行数:11，代码来源:wi-crypto.c

示例5: decrypt_and_verify_secrets

int decrypt_and_verify_secrets(CPOR_key *key, unsigned char *input, size_t input_len, unsigned char *plaintext, size_t *plaintext_len, unsigned char *authenticator, size_t authenticator_len) {

    EVP_CIPHER_CTX ctx;
    EVP_CIPHER *cipher = NULL;
    unsigned char mac[EVP_MAX_MD_SIZE];
    size_t mac_size = EVP_MAX_MD_SIZE;
    int len;

    if(!key || !key->k_enc || !key->k_mac || !input || !input_len || !plaintext || !plaintext_len || !authenticator || !authenticator_len) return 0;

    OpenSSL_add_all_algorithms();
    memset(mac, 0, mac_size);

    /* Verify the HMAC-SHA1 */
    if(!HMAC(EVP_sha1(), key->k_mac, key->k_mac_size, input, input_len, mac, (unsigned int *)&mac_size)) goto cleanup;
    if(authenticator_len != mac_size) goto cleanup;
    if(memcmp(mac, authenticator, mac_size) != 0) goto cleanup;


    EVP_CIPHER_CTX_init(&ctx);
    switch(key->k_enc_size) {
    case 16:
        cipher = (EVP_CIPHER *)EVP_aes_128_cbc();
        break;
    case 24:
        cipher = (EVP_CIPHER *)EVP_aes_192_cbc();
        break;
    case 32:
        cipher = (EVP_CIPHER *)EVP_aes_256_cbc();
        break;
    default:
        return 0;
    }
    if(!EVP_DecryptInit(&ctx, cipher, key->k_enc, NULL)) goto cleanup;

    *plaintext_len = 0;

    if(!EVP_DecryptUpdate(&ctx, plaintext, (int *)plaintext_len, input, input_len)) goto cleanup;
    EVP_DecryptFinal(&ctx, plaintext + *plaintext_len, &len);

    *plaintext_len += len;

    EVP_CIPHER_CTX_cleanup(&ctx);

    return 1;

cleanup:
    *plaintext_len = 0;

    return 0;

}

开发者ID:nypgit，项目名称:compact-proofs-of-retrievability，代码行数:52，代码来源:cpor-misc.c

示例6: EVP_CIPHER_do_all_sorted

void EVP_CIPHER_do_all_sorted(void (*callback)(const EVP_CIPHER *cipher,
                                               const char *name,
                                               const char *unused, void *arg),
                              void *arg) {
  callback(EVP_aes_128_cbc(), "AES-128-CBC", NULL, arg);
  callback(EVP_aes_128_ctr(), "AES-128-CTR", NULL, arg);
  callback(EVP_aes_128_ecb(), "AES-128-ECB", NULL, arg);
  callback(EVP_aes_128_ofb(), "AES-128-OFB", NULL, arg);
  callback(EVP_aes_256_cbc(), "AES-256-CBC", NULL, arg);
  callback(EVP_aes_256_ctr(), "AES-256-CTR", NULL, arg);
  callback(EVP_aes_256_ecb(), "AES-256-ECB", NULL, arg);
  callback(EVP_aes_256_ofb(), "AES-256-OFB", NULL, arg);
  callback(EVP_aes_256_xts(), "AES-256-XTS", NULL, arg);
  callback(EVP_des_cbc(), "DES-CBC", NULL, arg);
  callback(EVP_des_ecb(), "DES-ECB", NULL, arg);
  callback(EVP_des_ede(), "DES-EDE", NULL, arg);
  callback(EVP_des_ede_cbc(), "DES-EDE-CBC", NULL, arg);
  callback(EVP_des_ede3_cbc(), "DES-EDE3-CBC", NULL, arg);
  callback(EVP_rc2_cbc(), "RC2-CBC", NULL, arg);
  callback(EVP_rc4(), "RC4", NULL, arg);

  // OpenSSL returns everything twice, the second time in lower case.
  callback(EVP_aes_128_cbc(), "aes-128-cbc", NULL, arg);
  callback(EVP_aes_128_ctr(), "aes-128-ctr", NULL, arg);
  callback(EVP_aes_128_ecb(), "aes-128-ecb", NULL, arg);
  callback(EVP_aes_128_ofb(), "aes-128-ofb", NULL, arg);
  callback(EVP_aes_256_cbc(), "aes-256-cbc", NULL, arg);
  callback(EVP_aes_256_ctr(), "aes-256-ctr", NULL, arg);
  callback(EVP_aes_256_ecb(), "aes-256-ecb", NULL, arg);
  callback(EVP_aes_256_ofb(), "aes-256-ofb", NULL, arg);
  callback(EVP_aes_256_xts(), "aes-256-xts", NULL, arg);
  callback(EVP_des_cbc(), "des-cbc", NULL, arg);
  callback(EVP_des_ecb(), "des-ecb", NULL, arg);
  callback(EVP_des_ede(), "des-ede", NULL, arg);
  callback(EVP_des_ede_cbc(), "des-ede-cbc", NULL, arg);
  callback(EVP_des_ede3_cbc(), "des-ede3-cbc", NULL, arg);
  callback(EVP_rc2_cbc(), "rc2-cbc", NULL, arg);
  callback(EVP_rc4(), "rc4", NULL, arg);
}

开发者ID:0x64616E69656C，项目名称:boringssl，代码行数:39，代码来源:evp_do_all.c

示例7: strdup

void *encfs_common_get_salt(char *ciphertext)
{
	char *ctcopy = strdup(ciphertext);
	char *keeptr = ctcopy;
	int i;
	char *p;
	static encfs_common_custom_salt cs;
	ctcopy += 7;
	p = strtokm(ctcopy, "*");
	cs.keySize = atoi(p);
	switch(cs.keySize)
	{
		case 128:
			cs.blockCipher = EVP_aes_128_cbc();
			cs.streamCipher = EVP_aes_128_cfb();
			break;

		case 192:
			cs.blockCipher = EVP_aes_192_cbc();
			cs.streamCipher = EVP_aes_192_cfb();
			break;
		case 256:
		default:
			cs.blockCipher = EVP_aes_256_cbc();
			cs.streamCipher = EVP_aes_256_cfb();
			break;
	}
	cs.keySize = cs.keySize / 8;
	p = strtokm(NULL, "*");
	cs.iterations = atoi(p);
	p = strtokm(NULL, "*");
	cs.cipher = atoi(p);
	p = strtokm(NULL, "*");
	cs.saltLen = atoi(p);
	p = strtokm(NULL, "*");
	for (i = 0; i < cs.saltLen; i++)
		cs.salt[i] =
			atoi16[ARCH_INDEX(p[i * 2])] * 16 +
			atoi16[ARCH_INDEX(p[i * 2 + 1])];
	p = strtokm(NULL, "*");
	cs.dataLen = atoi(p);
	p = strtokm(NULL, "*");
	for (i = 0; i < cs.dataLen; i++)
		cs.data[i] =
			atoi16[ARCH_INDEX(p[i * 2])] * 16 +
			atoi16[ARCH_INDEX(p[i * 2 + 1])];

	cs.ivLength = EVP_CIPHER_iv_length( cs.blockCipher );
	MEM_FREE(keeptr);
	return (void *) &cs;
}

开发者ID:Allen-smith，项目名称:ctf-tools，代码行数:51，代码来源:encfs_common_plug.c

示例8: switch

static const EVP_CIPHER *getAesCipher(size32_t keyLen)
{
    switch (keyLen)
    {
    case 128/8:
        return EVP_aes_128_cbc();
    case 192/8:
        return EVP_aes_192_cbc();
    case 256/8:
        return EVP_aes_256_cbc();
    default:
        throw makeStringException(0, "Invalid AES key size, must be 128, 192 or 256 bit");
    }
}

开发者ID:AttilaVamos，项目名称:HPCC-Platform，代码行数:14，代码来源:ske.cpp

示例9: encrypt_and_authentucate_secrets

int encrypt_and_authentucate_secrets(CPOR_key *key, unsigned char *input, size_t input_len, unsigned char *ciphertext, size_t *ciphertext_len, unsigned char *authenticator, size_t *authenticator_len) {

    EVP_CIPHER_CTX ctx;
    EVP_CIPHER *cipher = NULL;
    int len;

    if(!key || !key->k_enc || !key->k_mac || !input || !input_len || !ciphertext || !ciphertext_len || !authenticator || !authenticator_len) return 0;

    OpenSSL_add_all_algorithms();

    EVP_CIPHER_CTX_init(&ctx);
    switch(key->k_enc_size) {
    case 16:
        cipher = (EVP_CIPHER *)EVP_aes_128_cbc();
        break;
    case 24:
        cipher = (EVP_CIPHER *)EVP_aes_192_cbc();
        break;
    case 32:
        cipher = (EVP_CIPHER *)EVP_aes_256_cbc();
        break;
    default:
        return 0;
    }
    //TODO: Fix the NULL IV
    if(!EVP_EncryptInit(&ctx, cipher, key->k_enc, NULL)) goto cleanup;

    *ciphertext_len = 0;

    if(!EVP_EncryptUpdate(&ctx, ciphertext, (int *)ciphertext_len, input, input_len)) goto cleanup;
    EVP_EncryptFinal(&ctx, ciphertext + *ciphertext_len, &len);

    *ciphertext_len += len;

    *authenticator_len = 0;
    /* Do the HMAC-SHA1 */
    if(!HMAC(EVP_sha1(), key->k_mac, key->k_mac_size, ciphertext, *ciphertext_len,
             authenticator, (unsigned int *)authenticator_len)) goto cleanup;

    EVP_CIPHER_CTX_cleanup(&ctx);

    return 1;

cleanup:
    *ciphertext_len = 0;
    *authenticator_len = 0;

    return 0;

}

开发者ID:nypgit，项目名称:compact-proofs-of-retrievability，代码行数:50，代码来源:cpor-misc.c

示例10: AES_CBC_MAC_Validate

bool AES_CBC_MAC_Validate(COSE_MacMessage * pcose, int TSize, const byte * pbKey, size_t cbKey, const byte * pbAuthData, size_t cbAuthData, cose_errback * perr)
{
	const EVP_CIPHER * pcipher = NULL;
	EVP_CIPHER_CTX ctx;
	int cbOut;
	byte rgbIV[16] = { 0 };
	byte rgbTag[16] = { 0 };
	bool f = false;
	unsigned int i;

	switch (cbKey*8) {
	case 128:
		pcipher = EVP_aes_128_cbc();
		break;

	case 256:
		pcipher = EVP_aes_256_cbc();
		break;

	default:
		FAIL_CONDITION(COSE_ERR_INVALID_PARAMETER);
	}

	//  Setup and run the OpenSSL code

	EVP_CIPHER_CTX_init(&ctx);
	CHECK_CONDITION(EVP_EncryptInit_ex(&ctx, pcipher, NULL, pbKey, rgbIV), COSE_ERR_CRYPTO_FAIL);

	TSize /= 8;

	for (i = 0; i < (unsigned int) cbAuthData / 16; i++) {
		CHECK_CONDITION(EVP_EncryptUpdate(&ctx, rgbTag, &cbOut, pbAuthData+(i*16), 16), COSE_ERR_CRYPTO_FAIL);
	}
	if (cbAuthData % 16 != 0) {
		CHECK_CONDITION(EVP_EncryptUpdate(&ctx, rgbTag, &cbOut, pbAuthData + (i * 16), cbAuthData % 16), COSE_ERR_CRYPTO_FAIL);
		CHECK_CONDITION(EVP_EncryptUpdate(&ctx, rgbTag, &cbOut, rgbIV, 16 - (cbAuthData % 16)), COSE_ERR_CRYPTO_FAIL);
	}

	cn_cbor * cn = _COSE_arrayget_int(&pcose->m_message, INDEX_MAC_TAG);
	CHECK_CONDITION(cn != NULL, COSE_ERR_CBOR);

	for (i = 0; i < (unsigned int)TSize; i++) f |= (cn->v.bytes[i] != rgbTag[i]);

	EVP_CIPHER_CTX_cleanup(&ctx);
	return !f;

errorReturn:
	EVP_CIPHER_CTX_cleanup(&ctx);
	return false;
}

开发者ID:KaneRoot，项目名称:COSE-C，代码行数:50，代码来源:openssl.c

示例11: switch

const EVP_CIPHER * Aes128EncriptionStrategy::getType(EncriptionBlockType mode){
	const EVP_CIPHER * type;
	switch(mode){
		case CBC:
			type = EVP_aes_128_cbc(); break;
		case OFB:
			type = EVP_aes_128_ofb(); break;
		case CFB:
			type = EVP_aes_128_cfb8(); break;
		case ECB:
			type = EVP_aes_128_ecb(); break;
	}
	return type;
}

开发者ID:gcastigl，项目名称:stenography，代码行数:14，代码来源:Aes128EncriptionStrategy.cpp

示例12: decrypt

int decrypt(char *message, uint32_t message_size, char *password, char *plaintext){
  EVP_CIPHER_CTX *ctx;
  int len;
  int plaintext_len;
  char key[KEY_SIZE_BYTES];
  int status = generateKey(password, SALT, key);
  if(!status){
    return -1;
  }
  const char *ciphertext = getEncryptedBody(message);


  /* Create and initialise the context */
  if(!(ctx = EVP_CIPHER_CTX_new())){
    return -1;
  } 
  

  /* Initialise the decryption operation. IMPORTANT - ensure you use a key
   * and IV size appropriate for your cipher
   * In this example we are using 256 bit AES (i.e. a 256 bit key). The
   * IV size for *most* modes is the same as the block size. For AES this
   * is 128 bits */
  if(1 != EVP_DecryptInit_ex(ctx, EVP_aes_128_cbc(), NULL, (unsigned char *) key, (unsigned char *) message)){
    return -1;
  }

  /* Provide the message to be decrypted, and obtain the plaintext output.
   * EVP_DecryptUpdate can be called multiple times if necessary
   */
  if(1 != EVP_DecryptUpdate(ctx, (unsigned char *) plaintext, &len, (unsigned char *) ciphertext, message_size - IV_SIZE_BYTES)){
    return -1;
  }

  plaintext_len = len;

  /* Finalise the decryption. Further plaintext bytes may be written at
   * this stage.
   */
  if(1 != EVP_DecryptFinal_ex(ctx, (unsigned char *) plaintext + len, &len)){
    return -1;
  } 
  plaintext_len += len;

  /* Clean up */
  EVP_CIPHER_CTX_free(ctx);

  return plaintext_len;
}

开发者ID:SCOTPAUL，项目名称:CinnotifyServer，代码行数:49，代码来源:crypto.c

示例13: aes_init

int
aes_init (crypt_data_t* crypt_data, crypt_init_t crypt_init)
{
    const EVP_CIPHER* cipher = 0;

    switch (crypt_data->keysize) {
    case 16:
        cipher = EVP_aes_128_cbc ();
        break;
    case 24:
        cipher = EVP_aes_192_cbc ();
        break;
    case 32:
        cipher = EVP_aes_256_cbc ();
        break;
    default:
        fprintf (stderr, "Invalid key size.\n");
        return -1;
    }

    EVP_CIPHER_CTX_init (&crypt_data->ctx);
    if (!crypt_init (&crypt_data->ctx,
                     cipher,
                     NULL,
                     crypt_data->keybuf,
                     crypt_data->ivbuf)) {
        fprintf (stderr, "OpenSSL initialization failed.\n");
        return 1;
    }
    if (verbose) {
        fprintf (stderr,
                 "EVP Initialized\n  Algorithm: %s\n",
                 EVP_CIPHER_name (EVP_CIPHER_CTX_cipher (&crypt_data->ctx)));
        fprintf (stderr, "  IV:  ");
        pp_buf (stderr, crypt_data->ivbuf, crypt_data->ivsize, 16, 2);
        fprintf (stderr, "  Key: ");
        pp_buf (stderr, crypt_data->keybuf, crypt_data->keysize, 16, 2);
    }
    crypt_data->buf_size = INBUFSIZE;
    crypt_data->out_buf =
        (char*)malloc (crypt_data->buf_size +
                       EVP_CIPHER_CTX_block_size (&crypt_data->ctx));
    crypt_data->in_buf = (char*)malloc (crypt_data->buf_size);
    if (!crypt_data->out_buf || !crypt_data->in_buf) {
        fprintf (stderr, "Unable to allocate memory.\n");
        return 1;
    }
    return 0;
}

开发者ID:flihp，项目名称:aes-pipe，代码行数:49，代码来源:aes-pipe.c

示例14: encrypt_token

/* token -> AES encrypt with session key -> rawdata_to_hex -> output  */
static char *
encrypt_token (CcnetProcessor *processor, const char *token)
{
    CcnetPeer *peer = NULL;
    char *enc_out = NULL;
    SeafileCrypt *crypt = NULL;
    unsigned char key[16], iv[16];
    int len;
    char *output = NULL;

    if (!token)
        goto out;

    peer = ccnet_get_peer(seaf->ccnetrpc_client, processor->peer_id);
    if (!peer || !peer->session_key) {
        seaf_warning ("[check tx v3] peer or peer session key not exist\n");
        goto out;
    }

    EVP_BytesToKey (EVP_aes_128_cbc(), /* cipher mode */
                    EVP_sha1(),        /* message digest */
                    NULL,              /* slat */
                    (unsigned char*)peer->session_key,
                    strlen(peer->session_key),
                    1,   /* iteration times */
                    key, /* the derived key */
                    iv); /* IV, initial vector */

    crypt = seafile_crypt_new (CURRENT_ENC_VERSION, key, iv);
    
    /* encrypt the token with session key, including the trailing null byte */
    if (seafile_encrypt (&enc_out, &len, token, strlen(token) + 1, crypt) < 0) {
        seaf_warning ("[check tx v3] failed to encrypt token\n");
        goto out;
    }

    output = g_malloc (len * 2 + 1);
    rawdata_to_hex ((unsigned char *)enc_out, output, len);
    output[len * 2] = '\0';

    
out:
    g_free (crypt);
    g_free (enc_out);
    if (peer)
        g_object_unref(peer);

    return output;
}

开发者ID:asukaliy，项目名称:seafile，代码行数:50，代码来源:check-tx-v3-proc.c

示例15: EVP_CIPHER_CTX_init

int AesFileEnc::do_crypt(FILE *in, FILE *out, int do_encrypt, unsigned char* key)
{
	/* Allow enough space in output buffer for additional block */
	unsigned char inbuf[1024], outbuf[1024 + EVP_MAX_BLOCK_LENGTH];
	int inlen, outlen;
	EVP_CIPHER_CTX ctx;

	std::cout << "tutaj";
	//	std::cout <<key<<std::endl;
	//unsigned char key[] = "0123456789abcdeF";
	std::cout <<key<< std::endl;


	//unsigned char iv[] = "1234567887654321";
	EVP_CIPHER_CTX_init(&ctx);
	
			EVP_CipherInit_ex(&ctx, EVP_aes_128_cbc(), NULL, NULL, NULL,
				do_encrypt);
			
	unsigned char *iv = this->iv(EVP_CIPHER_CTX_iv_length(&ctx));	
			std::cout<< this->keyLength << std::endl;
			std::cout<< EVP_CIPHER_CTX_iv_length(&ctx) <<std::endl;
			OPENSSL_assert(EVP_CIPHER_CTX_key_length(&ctx) == this->keyLength);
			//OPENSSL_assert(EVP_CIPHER_CTX_iv_length(&ctx) == this->keyLength);
			EVP_CipherInit_ex(&ctx, NULL, NULL, key, iv, do_encrypt);
	
			for(;;)
					{
					inlen = fread(inbuf, 1, 1024, in);
					if(inlen <= 0) break;
					if(!EVP_CipherUpdate(&ctx, outbuf, &outlen, inbuf, inlen))
							{
	
							EVP_CIPHER_CTX_cleanup(&ctx);
							return 0;
							}
					fwrite(outbuf, 1, outlen, out);
					}
			if(!EVP_CipherFinal_ex(&ctx, outbuf, &outlen))
					{

					EVP_CIPHER_CTX_cleanup(&ctx);
					return 0;
					}
			fwrite(outbuf, 1, outlen, out);

			EVP_CIPHER_CTX_cleanup(&ctx);
			return 1;
			}

开发者ID:MichalKupczynski，项目名称:kryptografia，代码行数:49，代码来源:AesFileEnc.cpp

示例16: sb_aes_init

/*
 * AES libcrypto
 */
static int sb_aes_init(struct sb_image_ctx *ictx, uint8_t *iv, int enc)
{
	EVP_CIPHER_CTX *ctx = &ictx->cipher_ctx;
	int ret;

	/* If there is no init vector, init vector is all zeroes. */
	if (!iv)
		iv = ictx->image_key;

	EVP_CIPHER_CTX_init(ctx);
	ret = EVP_CipherInit(ctx, EVP_aes_128_cbc(), ictx->image_key, iv, enc);
	if (ret == 1)
		EVP_CIPHER_CTX_set_padding(ctx, 0);
	return ret;
}

开发者ID:DeviceSolutions，项目名称:u-boot-opal6，代码行数:18，代码来源:mxsimage.c

示例17: Cipher

	explicit Cipher(Name name = N_AES128_CBC)
		: cipher_(0)
	{
		EVP_CIPHER_CTX_init(&ctx_);
		switch (name) {
		case N_AES128_CBC: cipher_ = EVP_aes_128_cbc(); break;
		case N_AES192_CBC: cipher_ = EVP_aes_192_cbc(); break;
		case N_AES256_CBC: cipher_ = EVP_aes_256_cbc(); break;
		case N_AES128_ECB: cipher_ = EVP_aes_128_ecb(); break;
		case N_AES192_ECB: cipher_ = EVP_aes_192_ecb(); break;
		case N_AES256_ECB: cipher_ = EVP_aes_256_ecb(); break;
		default:
			throw cybozu::Exception("crypto:Cipher:Cipher:name") << (int)name;
		}
	}

开发者ID:pombredanne，项目名称:cybozulib，代码行数:15，代码来源:crypto.hpp

示例18: decryptToArray

char* decryptToArray(FILE *ifp,char ckey[], char ivec[]) {

    fseek(ifp, 0L, SEEK_END); int fsize = ftell(ifp);

    fseek(ifp, 0L, SEEK_SET);

    int outLen1 = 0; int outLen2 = 0; unsigned char *indata = malloc(fsize);
    unsigned char *outdata = malloc(fsize);

    fread(indata,sizeof(char),fsize, ifp);//Read Entire File

    EVP_CIPHER_CTX ctx; EVP_DecryptInit(&ctx,EVP_aes_128_cbc(),ckey,ivec);
    EVP_DecryptUpdate(&ctx,outdata,&outLen1,indata,fsize);
    EVP_DecryptFinal(&ctx,outdata + outLen1,&outLen2);
    return(outdata); }

开发者ID:BassTester，项目名称:kryptografia，代码行数:15，代码来源:zad1.c

示例19: cipher_by_name

/** Get cipher by name constants.
 * @param cipher cipher name
 * @return cipher engine
 */
const EVP_CIPHER *
cipher_by_name(const char *cipher)
{
  if (strcmp(cipher, LN_aes_128_ecb) == 0) {
    return EVP_aes_128_ecb();
  } else if (strcmp(cipher, LN_aes_128_cbc) == 0) {
    return EVP_aes_128_cbc();
  } else if (strcmp(cipher, LN_aes_256_ecb) == 0) {
    return EVP_aes_256_ecb();
  } else if (strcmp(cipher, LN_aes_256_cbc) == 0) {
    return EVP_aes_256_cbc();
  } else {
    throw std::runtime_error("Unknown cipher type");
  }
}

开发者ID:timn，项目名称:fawkes，代码行数:19，代码来源:crypto.cpp

示例20: sshkey_private_pem_to_blob

/* convert SSH v2 key in OpenSSL PEM format */
static int
sshkey_private_pem_to_blob(struct sshkey *key, struct sshbuf *blob,
    const char *_passphrase, const char *comment)
{
	int success, r;
	int blen, len = strlen(_passphrase);
	u_char *passphrase = (len > 0) ? (u_char *)_passphrase : NULL;
	const EVP_CIPHER *cipher = (len > 0) ? EVP_aes_128_cbc() : NULL;
	const u_char *bptr;
	BIO *bio = NULL;

	if (len > 0 && len <= 4)
		return SSH_ERR_PASSPHRASE_TOO_SHORT;
	if ((bio = BIO_new(BIO_s_mem())) == NULL)
		return SSH_ERR_ALLOC_FAIL;

	switch (key->type) {
	case KEY_DSA:
		success = PEM_write_bio_DSAPrivateKey(bio, key->dsa,
		    cipher, passphrase, len, NULL, NULL);
		break;
	case KEY_ECDSA:
		success = PEM_write_bio_ECPrivateKey(bio, key->ecdsa,
		    cipher, passphrase, len, NULL, NULL);
		break;
	case KEY_RSA:
		success = PEM_write_bio_RSAPrivateKey(bio, key->rsa,
		    cipher, passphrase, len, NULL, NULL);
		break;
	default:
		success = 0;
		break;
	}
	if (success == 0) {
		r = SSH_ERR_LIBCRYPTO_ERROR;
		goto out;
	}
	if ((blen = BIO_get_mem_data(bio, &bptr)) <= 0) {
		r = SSH_ERR_INTERNAL_ERROR;
		goto out;
	}
	if ((r = sshbuf_put(blob, bptr, blen)) != 0)
		goto out;
	r = 0;
 out:
	BIO_free(bio);
	return r;
}

开发者ID:hshoexer，项目名称:libopenssh，代码行数:49，代码来源:authfile.c

注：本文中的EVP_aes_128_cbc函数示例整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ EVP_aes_128_ecb函数代码示例发布时间：2022-05-30

C++ EVP_VerifyUpdate函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19166|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9981|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8321|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8690|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8634|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9650|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8617|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7994|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8648|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7531|2022-11-06

客服电话

电子邮件

C++ EVP_aes_128_cbc函数代码示例

示例1: decrypt_token

示例2: typeToCIPHER

示例3: cipher_by_name

示例4: _wi_cipher_cipher

示例5: decrypt_and_verify_secrets

示例6: EVP_CIPHER_do_all_sorted

示例7: strdup

示例8: switch

示例9: encrypt_and_authentucate_secrets

示例10: AES_CBC_MAC_Validate

示例11: switch

示例12: decrypt

示例13: aes_init

示例14: encrypt_token

示例15: EVP_CIPHER_CTX_init

示例16: sb_aes_init

示例17: Cipher

示例18: decryptToArray

示例19: cipher_by_name

示例20: sshkey_private_pem_to_blob

请发表评论

全部评论

上一篇：

下一篇：

theindianappguy/machine_learning_flutter

切微信小程序前端制作-设备管理主界面

samaxes/minify-maven-plugin: Combine and

挨打的读音是什么？是āi dǎ还是ái dǎ？

nacika-ins/nanachibot: nanachibot is Rus

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053