C++ Check_Object函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中Check_Object函数的典型用法代码示例。如果您正苦于以下问题：C++ Check_Object函数的具体用法？C++ Check_Object怎么用？C++ Check_Object使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了Check_Object函数的17个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: Check_Object

//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
// return:  true=math good, false=math unstable
bool
gosFX::SplineCurve::SetCurve(
							 Stuff::Scalar v0,
							 Stuff::Scalar v1
							 )
{
	Check_Object(this);
	
	m_a = 0.0f;
	m_b = 0.0f;
	m_slope = v1 - v0;
	m_value = v0;
	return Stuff::Close_Enough(m_slope + v0, v1);
}

开发者ID:wolfman-x，项目名称:mechcommander2，代码行数:16，代码来源:fcurve.cpp

示例2: Check_Object

//------------------------------------------------------------------------------
//
gosFX::ShapeCloud*
	gosFX::ShapeCloud::Make(
		Specification *spec,
		unsigned flags
	)
{
	Check_Object(spec);

	gos_PushCurrentHeap(Heap);
	ShapeCloud *cloud = new gosFX::ShapeCloud(spec, flags);
	gos_PopCurrentHeap();

	return cloud;
}

开发者ID:Echelon9，项目名称:mechcommander2-open，代码行数:16，代码来源:ShapeCloud.cpp

示例3: Check_Object

//
//#############################################################################
// GetSize
//#############################################################################
//
CollectionSize
	PlugIterator::GetSize()
{
	Check_Object(this);
	CollectionSize i = 0;

	First();
	while (GetCurrentImplementation() != NULL)
	{
		i++;
      Next();
	}
	return i;
}

开发者ID:Ariemeth，项目名称:MechCommander2HD，代码行数:19，代码来源:plug.cpp

示例4: Check_Pointer

//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
//
void 
gosFX::ComplexCurve::Load(
	Stuff::MemoryStream *stream,
	int gfx_version
)
{
	Check_Pointer(this);
	Check_Object(stream);

	if (gfx_version < 15)
	{
		Stuff::Scalar duration;
		*stream >> duration;
	}

开发者ID:wolfman-x，项目名称:mechcommander2，代码行数:16，代码来源:fcurve.cpp

示例5: SpinningCloud__Specification

//------------------------------------------------------------------------------
//
gosFX::CardCloud__Specification::CardCloud__Specification(
	std::iostream stream, uint32_t gfx_version)
	: SpinningCloud__Specification(gosFX::CardCloudClassID, stream, gfx_version)
{
	// Check_Pointer(this);
	Check_Object(stream);
	_ASSERT(m_class == CardCloudClassID);
	// _ASSERT(gos_GetCurrentHeap() == Heap);
	m_halfHeight.Load(stream, gfx_version);
	m_aspectRatio.Load(stream, gfx_version);
	//
	//-------------------------------------------------------------------
	// If we are reading an old version of the card cloud, ignore all the
	// animation on the UV channels
	//-------------------------------------------------------------------
	//
	if (gfx_version < 10)
	{
		m_pIndex.m_ageCurve.SetCurve(0.0f);
		m_pIndex.m_seedCurve.SetCurve(1.0f);
		m_pIndex.m_seeded = false;
		SeededCurveOf<ComplexCurve, LinearCurve, Curve::e_ComplexLinearType> temp;
		temp.Load(stream, gfx_version);
		float v = temp.ComputeValue(0.0f, 0.0f);
		m_UOffset.SetCurve(v);
		temp.Load(stream, gfx_version);
		v = temp.ComputeValue(0.0f, 0.0f);
		m_VOffset.SetCurve(v);
		m_USize.Load(stream, gfx_version);
		m_VSize.Load(stream, gfx_version);
		m_animated = false;
	}
	//
	//------------------------------
	// Otherwise, read in the curves
	//------------------------------
	//
	else
	{
		m_pIndex.Load(stream, gfx_version);
		m_UOffset.Load(stream, gfx_version);
		m_VOffset.Load(stream, gfx_version);
		m_USize.Load(stream, gfx_version);
		m_VSize.Load(stream, gfx_version);
		*stream >> m_animated;
	}
	SetWidth();
	m_totalParticleSize = gosFX::CardCloud::ParticleSize;
	m_particleClassSize = sizeof(gosFX::CardCloud::Particle);
}

开发者ID:mechasource，项目名称:mechcommander2，代码行数:52，代码来源:cardcloud.cpp

示例6: Check_Object

//------------------------------------------------------------------------------
//
void gosFX::CardCloud__Specification::Save(std::iostream stream)
{
	// Check_Object(this);
	Check_Object(stream);
	SpinningCloud__Specification::Save(stream);
	m_halfHeight.Save(stream);
	m_aspectRatio.Save(stream);
	m_pIndex.Save(stream);
	m_UOffset.Save(stream);
	m_VOffset.Save(stream);
	m_USize.Save(stream);
	m_VSize.Save(stream);
	*stream << m_animated;
}

开发者ID:mechasource，项目名称:mechcommander2，代码行数:16，代码来源:cardcloud.cpp

示例7: Check_Object

//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
//
MLR_I_L_TMesh*
	MLR_I_L_TMesh::Make(
		MemoryStream *stream,
		int version
	)
{
	Check_Object(stream);

	gos_PushCurrentHeap(Heap);
	MLR_I_L_TMesh *mesh = new MLR_I_L_TMesh(DefaultData, stream, version);
	gos_PopCurrentHeap();

	return mesh;
}

开发者ID:Echelon9，项目名称:mechcommander2-open，代码行数:16，代码来源:mlr_i_l_tmesh.cpp

示例8: SetReferenceState

		virtual void SetReferenceState(const MLRState& _state, size_t pass = 0)
		{
			Check_Object(this);
			Verify((intptr_t(pass) >= 0) && pass < 2);
			if(pass == 0)
			{
				referenceState = _state;
			}
			else
			{
				passes = 2;
				referenceState2 = _state;
			}
		}

开发者ID:BobrDobr69，项目名称:mechcommander2，代码行数:14，代码来源:mlr_i_det_tmesh.hpp

示例9: Check_Object

//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
//
bool
gosFX::Curve::IsComplex()
{
	Check_Object(this);
	return
		m_type == e_ComplexLinearType     ||
		m_type == e_ComplexComplexType	||
		m_type == e_ComplexSplineType		||
		m_type == e_ConstantComplexType	||
		m_type == e_ConstantLinearType	||
		m_type == e_ConstantSplineType	||
		m_type == e_SplineSplineType	||
		m_type == e_SplineLinearType;
}

开发者ID:BobrDobr69，项目名称:mechcommander2，代码行数:16，代码来源:fcurve.cpp

示例10: MLRPrimitive

//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
//
MLRIndexedPrimitive::MLRIndexedPrimitive(
	ClassData *class_data,
	MemoryStream *stream,
	int version
):
	MLRPrimitive(class_data, stream, version)
{
	Check_Pointer(this);
	Check_Object(stream);

	MemoryStreamIO_Read(stream, &index);

	visibleIndexedVerticesKey = false;
	visibleIndexedVertices.SetLength(numVertices);
}

开发者ID:Ariemeth，项目名称:MechCommander2HD，代码行数:17，代码来源:mlrindexedprimitive.cpp

示例11: Check_Object

//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
//
void
	MLRLookUpLight::Write(Stuff::Page *page)
{
	Check_Object(this);
	Check_Object(page);

	MLRInfiniteLight::Write(page);

	char data[256];

	sprintf(data, "%f %f %f", mapOrigin.x, mapOrigin.y, mapOrigin.z);
	Verify(strlen(data) < sizeof(data));
	page->SetEntry("MapOrigin", data);

	sprintf(data, "%d %d", mapZoneCountX, mapZoneCountZ);
	Verify(strlen(data) < sizeof(data));
	page->SetEntry("MapSize", data);

	sprintf(data, "%f %f", zoneSizeX, zoneSizeZ);
	Verify(strlen(data) < sizeof(data));
	page->SetEntry("ZoneSize", data);

	page->SetEntry("MapName", mapName);
}

开发者ID:Ariemeth，项目名称:MechCommander2HD，代码行数:26，代码来源:mlrlookuplight.cpp

示例12: Spew

	void
		Spew(
			const char* group,
			const EulerAngles &angle
		)
	{
		Check_Object(&angle);
		SPEW((group, "<+"));
		Spew(group, angle.pitch);
		SPEW((group, ",+"));
		Spew(group, angle.yaw);
		SPEW((group, ",+"));
		Spew(group, angle.roll);
		SPEW((group, ">+"));
	}

开发者ID:wolfman-x，项目名称:mechcommander2，代码行数:15，代码来源:rotation.cpp

示例13: Plug

	//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
	//
	Trace::Trace(
		const char* name,
		Type type 
	):
		Plug(DefaultData)
	{
		traceNumber = NextTraceID++;
		traceType = (BYTE)type;
		traceName = name;
		
		lastActivity = 0.0;

		Check_Object(TraceManager::Instance);
		TraceManager::Instance->Add(this);
	}

开发者ID:Ariemeth，项目名称:MechCommander2HD，代码行数:17，代码来源:Trace.cpp

示例14: Check_Object

//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
//
void
	MLRIndexedPrimitive::SetIndexData(
		unsigned short *index_array,
		int index_count
	)
{
	Check_Object(this); 
	Check_Pointer(index_array);

	if(coords.GetLength() > 0)
	{
		visibleIndexedVertices.SetLength(coords.GetLength());
	}

	index.AssignData(index_array, index_count);
}

开发者ID:Ariemeth，项目名称:MechCommander2HD，代码行数:18，代码来源:mlrindexedprimitive.cpp

示例15: Check_Pointer

//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
//
bool
	MLR_I_L_TMesh::Copy(MLR_I_L_PMesh *pMesh)
{
	Check_Pointer(this);
	Check_Object(pMesh);

	int len;
	Vector3D *_normals;

	MLR_I_C_TMesh::Copy(pMesh);

	pMesh->GetNormalData(&_normals, &len);
	SetNormalData(_normals, len);

	return true;
}

开发者ID:Echelon9，项目名称:mechcommander2-open，代码行数:18，代码来源:mlr_i_l_tmesh.cpp

示例16: Check_Object

//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
//
int
	MLRIndexedPolyMesh::FindBackFace(const Point3D& u)
{
	Check_Object(this);

	int i, numPrimitives = GetNumPrimitives();
	int ret = 0, len = lengths.GetLength();
	unsigned char *iPtr;
	Plane *p;

	if(len <= 0)
	{
		visible = 0;

		return 0;
	}

	p = &facePlanes[0];
	iPtr = &testList[0];

	if(state.GetBackFaceMode() == MLRState::BackFaceOffMode)
	{
		ResetTestList();
		ret = 1;
	}
	else
	{
		for(i=0;i<numPrimitives;i++,p++,iPtr++)
		{
//			Scalar s = p->DistanceTo(u);

//			*iPtr = !Get_Sign_Bit(s);

			*iPtr = (p->DistanceTo(u) >= 0.0f) ? (unsigned char)1: (unsigned char)0;
			
			ret += *iPtr;
		}

		visible = ret ? (unsigned char)1 : (unsigned char)0;
	}

	visible = ret ? (unsigned char)1 : (unsigned char)0;

	FindVisibleVertices();

	return ret;
}

开发者ID:Ariemeth，项目名称:MechCommander2HD，代码行数:49，代码来源:mlrindexedpolymesh.cpp

示例17: Check_Object

//
//#############################################################################
//#############################################################################
//
Scalar
	UnitQuaternion::GetAngle()
{
	Check_Object(this);

	Scalar sine_of_half = Sqrt(x*x + y*y + z*z);
	if (Small_Enough(sine_of_half))
	{
		return 0.0f;
	}

	SinCosPair half_angle(sine_of_half, w);
	Radian angle;
	angle = half_angle;

	return angle * 2.0f;
}

开发者ID:wolfman-x，项目名称:mechcommander2，代码行数:21，代码来源:rotation.cpp

注：本文中的Check_Object函数示例整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。