C++ CU_add_suite函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中CU_add_suite函数的典型用法代码示例。如果您正苦于以下问题：C++ CU_add_suite函数的具体用法？C++ CU_add_suite怎么用？C++ CU_add_suite使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了CU_add_suite函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: add_lattice2d_suite

void add_lattice2d_suite() {
	CU_pSuite lattice2d_suite = NULL;
	lattice2d_suite = CU_add_suite("2D-lattice Suite",NULL,NULL);
	CU_add_test(
		lattice2d_suite, "Create 2x2 n=3 lattice",
		test_create_2x2_n3_lattice);
	CU_add_test(
        lattice2d_suite, "norm 2x2 n=2 lat",test_norm_2x2_n2_lat);
    CU_add_test(
        lattice2d_suite, "norm 3x3 n=4 lat",test_norm_3x3_n4_lat);
}

开发者ID:Ununquadium，项目名称:cluster，代码行数:11，代码来源:suite_lattice2d.c

示例2: register_suite_property

void register_suite_property(void)
{
	CU_Suite * suite;
	suite = CU_add_suite("property", NULL, NULL);
	CU_add_test(suite, "list init", test_list_init);
	CU_add_test(suite, "list free", test_list_free);
	CU_add_test(suite, "list append", test_list_append);
	CU_add_test(suite, "list set", test_list_set);
	CU_add_test(suite, "list contains", test_list_contains);
	CU_add_test(suite, "list value", test_list_value);
	CU_add_test(suite, "list find", test_list_find);
}

开发者ID:mariokonrad，项目名称:navd，代码行数:12，代码来源:test_property.c

示例3: add_tests

void add_tests(void)
{
    assert(NULL != CU_get_registry());
    assert(!CU_is_test_running());

    CU_pSuite pSuite;

    pSuite = CU_add_suite("suite_success_both", suite_success_init, suite_success_clean);
    CU_add_test(pSuite, "testSuccess1", testSuccess1);
    CU_add_test(pSuite, "testSuccess2", testSuccess2);
    CU_add_test(pSuite, "testSuccess3", testSuccess3);
}

开发者ID:foxostro，项目名称:GrimWaffle_old，代码行数:12，代码来源:test.c

示例4: migration_add_suite

void migration_add_suite(void)
{
	size_t i = 0;
	CU_pSuite suite;

	suite = CU_add_suite("Migration Handling", NULL, NULL);
	while (migration_tests[i].pName) {
		CU_add_test(suite, migration_tests[i].pName,
		            migration_tests[i].pTestFunc);
		i++;
	}
}

开发者ID:thentenaar，项目名称:mmm，代码行数:12，代码来源:migration.c

示例5: utils_add_suite

void utils_add_suite(void)
{
	size_t i = 0;
	CU_pSuite suite;

	suite = CU_add_suite("Utils", NULL, NULL);
	while (utils_tests[i].pName) {
		CU_add_test(suite, utils_tests[i].pName,
		            utils_tests[i].pTestFunc);
		i++;
	}
}

开发者ID:thentenaar，项目名称:mmm，代码行数:12，代码来源:utils.c

示例6: misc_suite_setup

void misc_suite_setup(void)
{
	CU_pSuite suite = CU_add_suite("miscellaneous", NULL, NULL);
	PG_ADD_TEST(suite, test_misc_force_2d);
	PG_ADD_TEST(suite, test_misc_simplify);
	PG_ADD_TEST(suite, test_misc_count_vertices);
	PG_ADD_TEST(suite, test_misc_area);
	PG_ADD_TEST(suite, test_misc_wkb);
	PG_ADD_TEST(suite, test_grid);
	PG_ADD_TEST(suite, test_clone);
	PG_ADD_TEST(suite, test_lwmpoint_from_lwgeom);
}

开发者ID:gbroccolo，项目名称:postgis，代码行数:12，代码来源:cu_misc.c

示例7: stringbuf_add_suite

void stringbuf_add_suite(void)
{
	size_t i = 0;
	CU_pSuite suite;

	suite = CU_add_suite("String Buffer", NULL, NULL);
	while (stringbuf_tests[i].pName) {
		CU_add_test(suite, stringbuf_tests[i].pName,
		            stringbuf_tests[i].pTestFunc);
		i++;
	}
}

开发者ID:thentenaar，项目名称:mmm，代码行数:12，代码来源:stringbuf.c

示例8: initialize_runtime_suite

CU_pSuite initialize_runtime_suite(void)
{
  CU_pSuite pSuite = CU_add_suite("runtime", NULL, NULL);
  if (pSuite == NULL) {
    return NULL;
  }

  ADD_TEST(test_creation);
  ADD_TEST(test_bootstrap);

  return pSuite;
}

开发者ID:smashwilson，项目名称:segment，代码行数:12，代码来源:runtime_tests.c

示例9: run_unit_tests

int run_unit_tests()
{
   CU_pSuite pSuite = NULL;

   /* initialize the CUnit test registry */
   if (CUE_SUCCESS != CU_initialize_registry())
      return CU_get_error();

   /* add a suite to the registry */
   pSuite = CU_add_suite("File Scanning", NULL, NULL);
   if (NULL == pSuite) {
      CU_cleanup_registry();
      return CU_get_error();
   }

#ifdef SUPER
//		ms_set_log_level(DEBUG);
//     av_log_set_level(AV_LOG_DEBUG);
   /* add the tests to the ms_scan suite */
   if (
	   NULL == CU_add_test(pSuite, "Simple test of ms_scan()", test_ms_scan) ||
	   NULL == CU_add_test(pSuite, "Test ms_scan() with no paths", test_ms_scan_2) ||
	   NULL == CU_add_test(pSuite, "Test of ms_scan() with too many paths", test_ms_scan_3) ||
	   NULL == CU_add_test(pSuite, "Test of ms_scan() with a bad directory", test_ms_scan_4) ||
// TODO: The following test fails due to the scanner freezing up.
//	   NULL == CU_add_test(pSuite, "Test of ms_scan() with strange path slashes", test_ms_scan_5) ||
	   NULL == CU_add_test(pSuite, "Test of ms_scan()'s progress notifications", test_ms_scan_6) ||
	   NULL == CU_add_test(pSuite, "Test of ms_file_scan()", test_ms_file_scan_1) ||
//NULL == CU_add_test(pSuite, "Test of scanning LOTS of files", test_ms_large_directory) ||
	   NULL == CU_add_test(pSuite, "Test of misc functions", test_ms_misc_functions) ||
  	   NULL == CU_add_test(pSuite, "Simple test of ASF audio file", test_ms_file_asf_audio) ||
   	   NULL == CU_add_test(pSuite, "Test Berkeley database functionality", test_ms_db)

	   )
   {
      CU_cleanup_registry();
      return CU_get_error();
   }
#endif

//   setupbackground_tests();
   setupdefect_tests();
//   setupimage_tests();
//	 setup_thumbnail_tests();

   /* Run all tests using the CUnit Basic interface */
   CU_basic_set_mode(CU_BRM_VERBOSE);
   CU_basic_run_tests();
//	CU_automated_run_tests();

   CU_cleanup_registry();
   return CU_get_error();
} /* run_unit_tests() */

开发者ID:chincheta0815，项目名称:libmediascan，代码行数:53，代码来源:test.c

示例10: main

int main(int argc, char **argv) {

    if (argc == 2 && (strcmp(argv[1], "--help") == 0 || strcmp(argv[1], "-h") == 0)) {
        fprintf(stderr, "usage %s [test prefix]\n\ntest options:\n", argv[0]);
        for (test_case_t *p = test_cases; p != NULL; p = p->next) {
            fprintf(stderr, " %s\n", p->description);
        }
        return EXIT_FAILURE;
    }

    if (CU_initialize_registry() != CUE_SUCCESS) {
        CU_ErrorCode err = CU_get_error();
        fprintf(stderr, "failed to initialise CUnit registry\n");
        return err;
    }

    CU_pSuite suite = CU_add_suite("passwand", NULL, NULL);
    if (suite == NULL) {
        CU_ErrorCode err = CU_get_error();
        CU_cleanup_registry();
        fprintf(stderr, "failed to add suite\n");
        return err;
    }

    unsigned total = 0;
    for (test_case_t *p = test_cases; p != NULL; p = p->next) {
        if (argc == 1 || strncmp(argv[1], p->description, strlen(argv[1])) == 0) {
            if (CU_add_test(suite, p->description, p->function) == NULL) {
                CU_ErrorCode err = CU_get_error();
                fprintf(stderr, "failed to add test \"%s\"\n", p->description);
                CU_cleanup_registry();
                return err;
            }
            total++;
        }
    }

    if (total == 0) {
        fprintf(stderr, "no tests found\n");
        return EXIT_FAILURE;
    }

    CU_basic_set_mode(CU_BRM_VERBOSE);
    CU_basic_run_tests();

    unsigned failed = CU_get_number_of_tests_failed();

    CU_cleanup_registry();

    printf("%u/%u passed\n", total - failed, total);

    return failed > 0 ? EXIT_FAILURE : EXIT_SUCCESS;
}

开发者ID:Smattr，项目名称:passwand，代码行数:53，代码来源:main.c

示例11: main

int main(void) {
  CU_pSuite pSuite1 = NULL;
  
  /* Initialize CUnit test registry */
  if(CUE_SUCCESS != CU_initialize_registry())
    return CU_get_error();

  /* add suite to the registry */
  pSuite1 = CU_add_suite("Suite 1", init_suite, clean_suite);
  if(NULL == pSuite1) {
    CU_cleanup_registry();
    return CU_get_error();
  }

  /* add tests to suite */
  if(NULL == CU_add_test(pSuite1, "Test case 1", testCase1)
     // || NULL == CU_add_test(pSuite1, ...[next test case]...)
     ) {
    CU_cleanup_registry();
    return CU_get_error();
  }
  if(NULL == CU_add_test(pSuite1, "Test case 2", testCase2)
     // || NULL == CU_add_test(pSuite1, ...[next test case]...)
     ) {
    CU_cleanup_registry();
    return CU_get_error();
  }
 if(NULL == CU_add_test(pSuite1, "Test case 3", testCase3)
     // || NULL == CU_add_test(pSuite1, ...[next test case]...)
     ) {
    CU_cleanup_registry();
    return CU_get_error();
  }
 if(NULL == CU_add_test(pSuite1, "Test case 4", testCase4)
     // || NULL == CU_add_test(pSuite1, ...[next test case]...)
     ) {
    CU_cleanup_registry();
    return CU_get_error();
  }
 if(NULL == CU_add_test(pSuite1, "Test case 5", testCase5)
     // || NULL == CU_add_test(pSuite1, ...[next test case]...)
     ) {
    CU_cleanup_registry();
    return CU_get_error();
  }


  /* Run all tests using console interface */
  CU_basic_set_mode(CU_BRM_VERBOSE);
  CU_basic_run_tests();
  CU_cleanup_registry();
  return CU_get_error();
}

开发者ID:nellysek，项目名称:moto，代码行数:53，代码来源:test_proto.c

示例12: TMR_Unit_Test_Handler

GOS_ERROR_CODE TMR_Unit_Test_Handler(VOS_APPL_UNIT_TEST_T *ut)
{
    int i = 0;
    CU_pSuite     pSuite = NULL;

    // show all the test suites
    if (0 == ut->id)
    { 
        printf("\r\n");
        while(i < sizeof(tmr_suites)/sizeof(CU_SuiteInfo))
        {
            if (CU_INVALID_SUITE != tmr_suites[i].id)
                printf("%d:\t%s\r\n", tmr_suites[i].id, tmr_suites[i].pName);
            i++;
        }
        return GOS_OK;
    }
    
    if(CU_initialize_registry()){
               fprintf(stderr, " Initialization of Test Registry failed. ");
               return GOS_ERR_NOT_INIT;
       }else{
               /**//* shortcut regitry */
               if(CU_ALL_TEST == ut->id)
               { 
                     if(CUE_SUCCESS != CU_register_suites(&tmr_suites[0])){
                           fprintf(stderr, "Register suites failed - %s ", CU_get_error_msg());
                           return GOS_ERR_NOT_INIT;
                     }
               }
               else
               {
                   int j = ut->id - 1;
                   if ((ut->id < 1) || (ut->id >= sizeof(tmr_suites)/sizeof(CU_SuiteInfo)))
                   {
                       return GOS_ERR_NOTSUPPORT;
                   }
                   pSuite = CU_add_suite(tmr_suites[j].pName, 
                                         tmr_suites[j].pInitFunc, 
                                         tmr_suites[j].pCleanupFunc);
                   for (i = 0; NULL != tmr_suites[ut->id-1].pTests[i].pName; i++) 
                   {
                         CU_add_test(pSuite, 
                                     tmr_suites[j].pTests[i].pName, 
                                     tmr_suites[j].pTests[i].pTestFunc) ;
                   }
               }
               CU_basic_set_mode(CU_BRM_VERBOSE);                
               CU_basic_run_tests();
               CU_cleanup_registry();
       }
    return GOS_OK;
}

开发者ID:KHATEEBNSIT，项目名称:AP，代码行数:53，代码来源:ut_tmr_main.c

示例13: adicionar_suite

void adicionar_suite(void){
	CU_pSuite suite;

	suite = CU_add_suite("Testes",NULL,NULL);

	CU_ADD_TEST(suite, teste_cria_tela);
	CU_ADD_TEST(suite, teste_mostra_tela);
	CU_ADD_TEST(suite, teste_mostra_tela_inicial);
	CU_ADD_TEST(suite, teste_mostra_tela_final);
	CU_ADD_TEST(suite, teste_mostra_tela_placar);

}

开发者ID:gerudoking，项目名称:lery-tetris，代码行数:12，代码来源:Tela_Teste.c

示例14: test_main

static void
test_main(spdk_event_t event)
{
	CU_pSuite suite = NULL;
	unsigned int num_failures;

	if (bdevio_construct_targets() < 0) {
		spdk_app_stop(-1);
		return;
	}

	if (CU_initialize_registry() != CUE_SUCCESS) {
		spdk_app_stop(CU_get_error());
		return;
	}

	suite = CU_add_suite("components_suite", NULL, NULL);
	if (suite == NULL) {
		CU_cleanup_registry();
		spdk_app_stop(CU_get_error());
		return;
	}

	if (
		CU_add_test(suite, "blockdev write read 4k", blockdev_write_read_4k) == NULL
		|| CU_add_test(suite, "blockdev write read 512 bytes",
			       blockdev_write_read_512Bytes) == NULL
		|| CU_add_test(suite, "blockdev write read size > 128k",
			       blockdev_write_read_size_gt_128k) == NULL
		|| CU_add_test(suite, "blockdev write read invalid size",
			       blockdev_write_read_invalid_size) == NULL
		|| CU_add_test(suite, "blockdev write read offset + nbytes == size of blockdev",
			       blockdev_write_read_offset_plus_nbytes_equals_bdev_size) == NULL
		|| CU_add_test(suite, "blockdev write read offset + nbytes > size of blockdev",
			       blockdev_write_read_offset_plus_nbytes_gt_bdev_size) == NULL
		|| CU_add_test(suite, "blockdev write read max offset",
			       blockdev_write_read_max_offset) == NULL
		|| CU_add_test(suite, "blockdev write read 8k on overlapped address offset",
			       blockdev_overlapped_write_read_8k) == NULL
	) {
		CU_cleanup_registry();
		spdk_app_stop(CU_get_error());
		return;
	}

	pthread_mutex_init(&g_test_mutex, NULL);
	pthread_cond_init(&g_test_cond, NULL);
	CU_basic_set_mode(CU_BRM_VERBOSE);
	CU_basic_run_tests();
	num_failures = CU_get_number_of_failures();
	CU_cleanup_registry();
	spdk_app_stop(num_failures);
}

开发者ID:weber-wenbo-wang，项目名称:spdk，代码行数:53，代码来源:bdevio.c

示例15: AddBasicSuite

/*------------------------------------------------------------*
 *      Test Function implementation for hash calculation     *
 *------------------------------------------------------------*/
int32_t AddBasicSuite()
{
    CU_pSuite pSuite = CU_add_suite("Hash Value Calculation", NULL, NULL);
    if (!pSuite)
        return ERR_REG;

    CU_pTest pTest = CU_add_test(pSuite, "MurMur hash V3", TestMurMur32);
    if (!pTest)
        return ERR_REG;

    return SUCC;
}

开发者ID:Masshat，项目名称:C-Common-Data-Structures，代码行数:15，代码来源:unit_hash.c

示例16: buildarea_suite_setup

void buildarea_suite_setup(void)
{
	CU_pSuite suite = CU_add_suite("buildarea", NULL, NULL);
	PG_ADD_TEST(suite,buildarea1);
	PG_ADD_TEST(suite,buildarea2);
	PG_ADD_TEST(suite,buildarea3);
	PG_ADD_TEST(suite,buildarea4);
	PG_ADD_TEST(suite,buildarea4b);
	PG_ADD_TEST(suite,buildarea5);
	PG_ADD_TEST(suite,buildarea6);
	PG_ADD_TEST(suite,buildarea7);
}

开发者ID:NianYue，项目名称:pipelinedb，代码行数:12，代码来源:cu_buildarea.c

示例17: main

/* Função principal para estabelecer e rodar os testes, retornando CUE_SUCCESS em caso de sucesso e outro 'CUnit error code' caso contrário. */
int main(){

	CU_pSuite pSuite_Pilha = NULL;
	CU_pSuite pSuite_File = NULL;

	printf("\033[2J");	
	printf("\033[1;1f");
	
	/* Inicializa o registro de testes CUnit. */
	if (CUE_SUCCESS != CU_initialize_registry())
		return CU_get_error();

	/* Inclui uma suíte ao registro. */
	pSuite_Pilha = CU_add_suite("Suite_Pilha", init_suite1, clean_suite1);
	if (NULL == pSuite_Pilha) {
		CU_cleanup_registry();
		return CU_get_error();
	}/*if*/

	pSuite_File = CU_add_suite("Suite_File", init_suite2, clean_suite2);
	if (NULL == pSuite_File) {
		CU_cleanup_registry();
		return CU_get_error();
	}/*if*/

	/* Adiciona os testes às suítes. */
	if ( (NULL==CU_add_test(pSuite_File, "teste de criarNovoArquivo(void)",testaAberturaArq)) ||
	     (NULL == CU_add_test(pSuite_File, "teste de leitura(char *nomearq)", testaLEITURA)) ||
	     (NULL==CU_add_test(pSuite_File, "teste de EditarExpr(char *nomearq)",testaEDICAO)) )
   	{
		CU_cleanup_registry();
		return CU_get_error();
	}/*if*/

	/* Roda todos os teste usando o 'CUnit Basic interface'. */
	CU_basic_set_mode(CU_BRM_VERBOSE);
	(void) CU_basic_run_tests();
	CU_cleanup_registry();
	return CU_get_error();
}

开发者ID:ingridsl，项目名称:calculadora_polonesa_inversa，代码行数:41，代码来源:testa_calculadora.c

示例18: main

int main()
{
    CU_pSuite pSuite = NULL;

    /* Init CUnit test registry */
    if (CUE_SUCCESS != CU_initialize_registry())
        return CU_get_error();

    /* Add suite to the registry */
    pSuite = CU_add_suite("yee_common", init_testsuite1, clean_testsuite1);
    if (!pSuite) {
        CU_cleanup_registry();
        return CU_get_error();
    }

    /* Add the tests to the suite */
    if (!CU_add_test(pSuite, "py_alloc_field", test_alloc_field)
        || !CU_add_test(pSuite, "py_set_grid", test_set_grid)
        || !CU_add_test(pSuite, "py_vec_func", test_vec_func)
        || !CU_add_test(pSuite, "py_vec_func2d", test_vec_func2d)
        || !CU_add_test(pSuite, "py_apply_func", test_apply_func)
        || !CU_add_test(pSuite, "py_init_acoustic_field",
                        test_init_acoustic_field)
        || !CU_add_test(pSuite, "py_init_local_acoustic_field",
                        test_init_local_acoustic_field)
        || !CU_add_test(pSuite, "py_assign_to, get_from",
                        test_assign_and_get)
        || !CU_add_test(pSuite, "py_set_boundary", test_set_boundary)
        || !CU_add_test(pSuite, "py_leapfrog", test_leapfrog)
        || !CU_add_test(pSuite, "py_partition_grid", test_partition_grid)
        || !CU_add_test(pSuite, "py_get_partition_coords",
                        test_get_partition_coords)
        /*|| !CU_add_test(pSuite, "py_expand_indices", test_expand_indices) */
        /*|| !CU_add_test(pSuite, "py_verify_grid_integrity", test_verify_grid) */
        /*|| !CU_add_test(pSuite, "py_set_local_index", test_set_local_index) */
        || !CU_add_test(pSuite, "py_parse_cmdline", test_parse_cmdline)
        || !CU_add_test(pSuite, "py_zero", test_zero)
        || !CU_add_test(pSuite, "py_zero2d", test_zero2d)
        || !CU_add_test(pSuite, "py_identity", test_identity)
        || !CU_add_test(pSuite, "py_identity2d", test_identity)
        || !CU_add_test(pSuite, "py_round_up_divide",
                        test_round_up_divide)) {
        CU_cleanup_registry();
        return CU_get_error();
    }

    /* Run all the tests using the CUnit Basic interface */
    CU_basic_set_mode(CU_BRM_VERBOSE);
    CU_basic_run_tests();
    CU_cleanup_registry();
    return CU_get_error();
}

开发者ID:octol，项目名称:paryee，代码行数:52，代码来源:yee_common_tests.c

示例19: main

/*
 * Main
 */
int
main(void)
{
	CU_pSuite ptr_suite = NULL;
	int nr_of_failed_tests = 0;
	int nr_of_failed_suites = 0;

	/* Initialize the CUnit test registry */
	if (CUE_SUCCESS != CU_initialize_registry())
		return CU_get_error();

	/* add a suite to the registry */
	ptr_suite = CU_add_suite("ofp port config", init_suite, clean_suite);
	if (NULL == ptr_suite) {
		CU_cleanup_registry();
		return CU_get_error();
	}

	if (NULL == CU_ADD_TEST(ptr_suite,
				test_sinlge_port_basic)) {
		CU_cleanup_registry();
		return CU_get_error();
	}

	if (NULL == CU_ADD_TEST(ptr_suite,
				test_two_ports_vlan)) {
		CU_cleanup_registry();
		return CU_get_error();
	}

	if (NULL == CU_ADD_TEST(ptr_suite,
				test_gre_port)) {
		CU_cleanup_registry();
		return CU_get_error();
	}

#if OFP_TESTMODE_AUTO
	CU_set_output_filename("CUnit-Port-conf");
	CU_automated_run_tests();
#else
	/* Run all tests using the CUnit Basic interface */
	CU_basic_set_mode(CU_BRM_VERBOSE);
	CU_basic_run_tests();
#endif

	nr_of_failed_tests = CU_get_number_of_tests_failed();
	nr_of_failed_suites = CU_get_number_of_suites_failed();
	CU_cleanup_registry();

	return (nr_of_failed_suites > 0 ?
		nr_of_failed_suites : nr_of_failed_tests);
}

开发者ID:babubalu，项目名称:ofp，代码行数:55，代码来源:ofp_test_port_conf.c

示例20: bc_tester_run_suite

int bc_tester_run_suite(test_suite_t *suite) {
	int i;

	CU_pSuite pSuite = CU_add_suite(suite->name, suite->before_all, suite->after_all);

	for (i = 0; i < suite->nb_tests; i++) {
		if (NULL == CU_add_test(pSuite, suite->tests[i].name, suite->tests[i].func)) {
			return CU_get_error();
		}
	}

	return 0;
}

开发者ID:kevinlovesing，项目名称:linphone，代码行数:13，代码来源:bc_tester_utils.c

注：本文中的CU_add_suite函数示例整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ CU_add_test函数代码示例发布时间：2022-05-30

C++ CU_PASS函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19159|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9981|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8320|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8690|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8633|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9649|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8617|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7994|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8648|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7531|2022-11-06

客服电话

电子邮件

C++ CU_add_suite函数代码示例

示例1: add_lattice2d_suite

示例2: register_suite_property

示例3: add_tests

示例4: migration_add_suite

示例5: utils_add_suite

示例6: misc_suite_setup

示例7: stringbuf_add_suite

示例8: initialize_runtime_suite

示例9: run_unit_tests

示例10: main

示例11: main

示例12: TMR_Unit_Test_Handler

示例13: adicionar_suite

示例14: test_main

示例15: AddBasicSuite

示例16: buildarea_suite_setup

示例17: main

示例18: main

示例19: main

示例20: bc_tester_run_suite

请发表评论

全部评论

上一篇：

下一篇：

CVE-2022-33742

xorrior/macOSTools: macOS Offensive Tool

caseypugh/minecraft: Some scripts to mak

Testinium/MobileDeviceInfo

xsfelvis/MaterialDesignStudy: A practic

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053