本文整理汇总了C++中CMD函数的典型用法代码示例。如果您正苦于以下问题：C++ CMD函数的具体用法？C++ CMD怎么用？C++ CMD使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了CMD函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: exec_pipe
int exec_pipe(char **cmd, char **env)
{
t_pip p;
p.ret = 0;
if (pipe(p.fd) == -1)
return (my_putstr("QuadriSH: Error pipe.\n", 2));
if ((p.pid = fork()) < 0)
return (1);
if (p.pid == 0)
{
close(p.fd[0]);
dup2(p.fd[1], 1);
my_parser(my_str_to_wordtab(CMD(cmd[0])), 1, env);
exit(0);
}
else
{
close(p.fd[1]);
dup2(p.fd[0], 0);
my_parser(my_str_to_wordtab(CMD(cmd[1])), 1, env);
wait(&p.ret);
exit(0);
}
return (p.ret);
}
开发者ID:TH3Mjuss，项目名称:QuadriSH，代码行数:26，代码来源:pipe.c
示例2: LCD_INIT
void LCD_INIT()
{
DDRD=0xFF;
DDRC=0xFF;
PORTD=0x38;
CMD ();
_delay_ms(100);
PORTD=0x0E;
CMD ();
_delay_ms(100);
PORTD=0x01;
CMD ();
_delay_ms(100);
PORTD=0x06;
CMD ();
_delay_ms(100);
PORTD=0x80;
CMD ();
_delay_ms(100);
PORTD=0x00;
}
开发者ID:ashishrai12，项目名称:LCD_ADC_AVR，代码行数:26，代码来源:LCD_ADC.c
示例3: FlashSingleProgram
ReturnType FlashSingleProgram(udword udAddrOff,uCPUBusType ucValue)
/****************************************************************************
* INPUT(S) :
* OUTPUT(S) :
* DESIGN DOC. :
* FUNCTION DESCRIPTION :
*
****************************************************************************/
{
uCPUBusType val;
OS_Use(&mSemaFlashDrv);
FlashWrite( 0x00555, (uCPUBusType)CMD(0x00AA) ); /* 1st cycle */
FlashWrite( 0x002AA, (uCPUBusType)CMD(0x0055) ); /* 2nd cycle */
FlashWrite( 0x00555, (uCPUBusType)CMD(0x00A0) ); /* Program command */
FlashWrite( udAddrOff,ucValue ); /* Program value */
FlashDataToggle();
val = FlashRead( udAddrOff );
if (val != ucValue)
{
return Flash_OperationTimeOut;
}
OS_Unuse(&mSemaFlashDrv);
return Flash_Success;
}
开发者ID:Strongc，项目名称:DC_source，代码行数:28，代码来源:c1648.c
示例4: locate_cmd
/*-------------------------------------------------------------------*/
int locate_cmd(int argc, char *argv[], char *cmdline)
{
int rc = 0;
UNREFERENCED(cmdline);
if (argc > 1 && CMD(argv[1],sysblk,6))
{
rc = locate_sysblk(argc, argv, cmdline);
}
else
if (argc > 1 && CMD(argv[1],regs,4))
{
rc = locate_regs(argc, argv, cmdline);
}
else
if (argc > 1 && CMD(argv[1],hostinfo,4))
{
rc = locate_hostinfo(argc, argv, cmdline);
}
else
{
WRMSG( HHC02299, "E", argv[0] );
rc = -1;
}
return rc;
}
开发者ID:IanWorthington，项目名称:hercules-390，代码行数:29，代码来源:hscloc.c
示例5: setup_gpioexp_stm32
void setup_gpioexp_stm32(void)
{
uint8_t data[16];
int sz;
int ret;
Serial.println("starting stm32 gpio code");
ret = stm32_cmd(CMD(0, 0), NULL, 0, data, 3);
if (ret < 0) {
Serial.println("Failed to find stm32 info");
} else {
sz = data[2];
if (sz > sizeof(data)) {
Serial.println("truncating info buffer size");
sz = sizeof(data);
}
ret = stm32_cmd(CMD(0,0), NULL, 0, data, sz);
if (ret) {
Serial.println("failed to read all stm32 info");
} else {
Serial.println("Found stm32 info:");
Serial.print("Major version "); Serial.println(data[0]);
Serial.print("Minor version "); Serial.println(data[1]);
}
}
}
开发者ID:HACManchester，项目名称:haccess-code，代码行数:28，代码来源:stm32_support.cpp
示例6: manage_env
void manage_env(t_group *grp)
{
int i;
int j;
int pos;
i = -1;
j = -1;
pos = list_to_tab(0, grp->first, NULL);
while (++i < grp->define_cmd[namenv] &&
CMD(cmd_split)[i + grp->define_cmd[e_opt] + 1])
pos += 1;
grp->env = (char **)malloc(sizeof(char *) * (pos + 1));
grp->env_save = (char **)malloc(sizeof(char *) * (pos + 1));
while (++j < pos + 1)
{
grp->env[j] = NULL;
grp->env_save[j] = NULL;
}
i = -1;
pos = list_to_tab(1, grp->first, &(grp->env));
while (++i < grp->define_cmd[namenv] &&
CMD(cmd_split)[i + grp->define_cmd[e_opt] + 1])
{
grp->env[pos + i] =
SDUP(CMD(cmd_split)[i + grp->define_cmd[e_opt] + 1]);
}
}
开发者ID:jmontija，项目名称:21sh，代码行数:28，代码来源:pre_exec.c
示例7: shell_run
void shell_run(tree_t e, struct tree_rd_ctx *ctx)
{
const int ndecls = tree_decls(e);
hash_t *decl_hash = hash_new(ndecls * 2, true);
for (int i = 0; i < ndecls; i++) {
tree_t d = tree_decl(e, i);
hash_put(decl_hash, tree_ident(d), d);
}
Tcl_Interp *interp = Tcl_CreateInterp();
bool have_quit = false;
Tcl_CreateExitHandler(shell_exit_handler, &have_quit);
shell_cmd_t shell_cmds[] = {
CMD(quit, &have_quit, "Exit simulation"),
CMD(run, ctx, "Start or resume simulation"),
CMD(restart, NULL, "Restart simulation"),
CMD(show, decl_hash, "Display simulation objects"),
CMD(help, shell_cmds, "Display this message"),
CMD(copyright, NULL, "Display copyright information"),
CMD(signals, e, "Find signal objects in the design"),
CMD(now, NULL, "Display current simulation time"),
CMD(watch, decl_hash, "Trace changes to a signal"),
CMD(unwatch, decl_hash, "Stop tracing signals"),
{ NULL, NULL, NULL, NULL}
};
qsort(shell_cmds, ARRAY_LEN(shell_cmds) - 1, sizeof(shell_cmd_t),
compare_shell_cmd);
for (shell_cmd_t *c = shell_cmds; c->name != NULL; c++)
Tcl_CreateObjCommand(interp, c->name, c->fn, c->cd, NULL);
show_banner();
slave_post_msg(SLAVE_RESTART, NULL, 0);
char *line;
while (!have_quit && (line = shell_get_line())) {
switch (Tcl_Eval(interp, line)) {
case TCL_OK:
break;
case TCL_ERROR:
errorf("%s", Tcl_GetStringResult(interp));
break;
default:
assert(false);
}
free(line);
}
Tcl_Exit(EXIT_SUCCESS);
}
开发者ID:a4a881d4，项目名称:nvc，代码行数:57，代码来源:shell.c
示例8: my_commands
static void my_commands (void)
{
extern int nsp (int argc, char *argv[]);
extern int psp (int argc, char *argv[]);
extern int keysp (int argc, char *argv[]);
CMD(ns, "# list nodes");
CMD(ps, "# list processes and avatars");
CMD(keys, "# list processes and keys");
}
开发者ID:taysom，项目名称:tau，代码行数:10，代码来源:main.c
示例9: init_dir
void init_dir (void)
{
int rc;
rc = sw_local("dir_cmd", &Dir_key);
if (rc) failure("sw_local", rc);
CMD(cr, "<path> # create a dir entry");
CMD(prtree, "# have dirfs print full directory tree");
CMD(prbackup, "# have dirfs print backup tree");
CMD(rd, "[inode num]+ # get and print a dir");
CMD(ls, "# list dir tree");
}
开发者ID:taysom，项目名称:tau，代码行数:13，代码来源:cmd_dir.c
示例10: handleCommand
void handleCommand(string command)
{
hC_begin
CMD("look")
cout << "You see:" << endl;
for (unsigned i = 0; i < stuff.size(); i++)
cout << " * " << stuff[i] << endl;
CMD("open")
if (args[1] == "door")
if (has_item("key"))
{
cout << "The door opened!" << endl;
ACHIEVE(DOOR_OPEN);
goNextLevel();
}
else
cout << "The door is locked!" << endl;
CMD("take")
if (args[1] == "comment")
{
if (has_achievement(EA_CAPTCHA)) {
FIND("comment");
} else
cout << "You can't! It's not your's!" << endl;
}
if (args[1] == "captcha")
FIND("captcha");
CMD("say")
if (args[1] == "captcha")
if (has_item("captcha"))
{
cout << "Man, that captcha was lamer than i thought!" << endl;
ACHIEVE(CAPTCHA);
}
else
cout << "What does that captcha say? I don't know!" << endl;
CMD("post")
if (args[1] == "comment")
if (has_item("comment"))
{
FIND("key");
ACHIEVE(COMMENT);
}
else
cout << "You can't! It's not your's!" << endl;
CMD("help")
cout << "The following commands are availeble:" << endl << " * look\n * open\n * take\n * say\n * post\n";
hC_end
}
开发者ID:roelforg，项目名称:textgame，代码行数:51，代码来源:main.cpp
示例11: main
int main(int argc, const char **argv)
{
setlocale(LC_ALL, "");
/* Hack:
* Right-to-left scripts don't work properly in many terminals.
* Hebrew speaking people say he_IL.utf8 looks so mangled
* they prefer en_US.utf8 instead.
*/
const char *msg_locale = setlocale(LC_MESSAGES, NULL);
if (msg_locale && strcmp(msg_locale, "he_IL.utf8") == 0)
setlocale(LC_MESSAGES, "en_US.utf8");
#if ENABLE_NLS
bindtextdomain(PACKAGE, LOCALEDIR);
textdomain(PACKAGE);
#endif
abrt_init((char **)argv);
argv++;
argc--;
const char *abrt_cli_usage_string = _(
"Usage: abrt-cli [--version] COMMAND [DIR]..."
);
const struct cmd_struct commands[] = {
CMD(list, _("List problems [in DIRs]")),
CMD(rm, _("Remove problem directory DIR")),
CMD(report, _("Analyze and report problem data in DIR")),
CMD(info, _("Print information about DIR")),
CMD(status, _("Print the count of the recent crashes")),
{NULL, NULL, NULL}
};
migrate_to_xdg_dirs();
unsigned skip = handle_internal_options(argc, argv, abrt_cli_usage_string);
argc -= skip;
argv += skip;
if (argc > 0)
handle_internal_command(argc, argv, commands);
/* user didn't specify command; print out help */
printf("%s\n\n", abrt_cli_usage_string);
list_cmds_help(commands);
printf("\n%s\n", _("See 'abrt-cli COMMAND --help' for more information"));
return 0;
}
开发者ID:shlomif，项目名称:abrt，代码行数:49，代码来源:abrt-cli.c
示例12: st7565Init
void st7565Init(FONT_DEF_STRUCT * font)
{
// Note: This can be optimised to set all pins to output and high
// in two commands by manipulating the registers directly (assuming
// that the pins are located in the same GPIO bank). The code is left
// as is for clarity sake in case the pins are not all located in the
// same bank.
ST7565_CS_DIR = OUTPUT;
ST7565_RST_DIR = OUTPUT;
ST7565_A0_DIR = OUTPUT;
ST7565_SCL_DIR = OUTPUT;
ST7565_SDA_DIR = OUTPUT;
ST7565_SDA = 1;
ST7565_SCL = 1;
ST7565_A0 = 1;
ST7565_RST = 1;
ST7565_CS = 1;
// Reset
ST7565_CS = 0;
ST7565_RST = 0;
_delay_ms(500);
ST7565_RST = 1;
currentFont = font;
// Configure Display
//CMD(ST7565_CMD_SET_BIAS_7); // LCD Bias Select 0xA3 0xA2
CMD(ST7565_CMD_SET_BIAS_9); // LCD Bias Select 0xA3 0xA2
CMD(ST7565_CMD_SET_ADC_NORMAL); // ADC Select 0xA0 0xA6
CMD(ST7565_CMD_SET_COM_NORMAL); // SHL Select 0xC0 0xc8
//CMD(ST7565_CMD_SET_COM_REVERSE); // SHL Select 0xC0 0xc8
CMD(ST7565_CMD_SET_DISP_START_LINE); // Initial Display Line 0x40 0x40
CMD(ST7565_CMD_SET_POWER_CONTROL | 0x04); // Turn on voltage converter (VC=1, VR=0, VF=0) 0x28 0x24
_delay_ms(50); // Wait 50mS
CMD(ST7565_CMD_SET_POWER_CONTROL | 0x06); // Turn on voltage regulator (VC=1, VR=1, VF=0)
_delay_ms(50); // Wait 50mS
CMD(ST7565_CMD_SET_POWER_CONTROL | 0x07); // Turn on voltage follower
_delay_ms(10); // Wait 10mS
CMD(ST7565_CMD_SET_RESISTOR_RATIO | 0x6); // Set LCD operating voltage
// Turn display on
CMD(ST7565_CMD_DISPLAY_ON); // 0xAF
CMD(ST7565_CMD_SET_ALLPTS_NORMAL); // 0xA4
st7565SetBrightness(0x11); // 0x18
}
开发者ID:bytepicker，项目名称:kk20，代码行数:48，代码来源:st7565.c
示例13: bot_disconnect
int bot_disconnect(struct bot* b)
{
printf("Dying...\n");
CMD(b->conn, "PRIVMSG", NULL, "EXIT CBOT is dying.");
globalkill=1;
return 0;
}
开发者ID:Detegr，项目名称:CBot，代码行数:7，代码来源:bot.c
示例14: writeBuffer
void writeBuffer(uint8_t *buffer)
{
uint8_t c, p;
for(p = 0; p < 8; p++)
{
CMD(ST7565_CMD_SET_PAGE | (7-p));
// CMD(ST7565_CMD_SET_PAGE | (p));
CMD(ST7565_CMD_SET_COLUMN_LOWER | (0x0 & 0xf));
CMD(ST7565_CMD_SET_COLUMN_UPPER | ((0x0 >> 4) & 0xf));
CMD(ST7565_CMD_RMW);
for(c = 0; c < 128; c++)
{
DATA(buffer[(128*p)+c]);
}
}
}
开发者ID:bytepicker，项目名称:kk20，代码行数:18，代码来源:st7565.c
示例15: stm32_gpio_set
extern int stm32_gpio_set(unsigned int gpio, unsigned int state)
{
uint8_t data;
int ret;
data = (gpio << 3) | (state ? 1 : 0);
ret = stm32_cmd(CMD(STM_CMD_SET, 0), &data, 1, NULL, 0);
return ret;
}
开发者ID:HACManchester，项目名称:haccess-code，代码行数:9，代码来源:stm32_support.cpp
示例16: init_cmd
void init_cmd (void)
{
CMD(q, " # quit");
CMD(inuse, " # dump inuse cache buffers");
CMD(gen, "[n] # generate n random directories, defaults to 10");
CMD(mkdir, "<name>* # create the named directories");
CMD(ls, "<name>* # list content of directories");
CMD(inodes," # list content of directories");
CMD(cr, "<name>+ # create the named files");
CMD(rw, "<name>+ # read/write test of given files");
}
开发者ID:wtaysom，项目名称:tau，代码行数:11，代码来源:main.c
示例17: bot_connect
int bot_connect(struct bot* b, const char* server, unsigned int port)
{
if(conn_connect(b->conn, server, port)==0)
{
const char** nick = config_getvals(b->conf, "nick");
const char** realname = config_getvals(b->conf, "realname");
CMD(b->conn, "NICK", NULL, *nick);
char name[64]; *name=0;
concat(name, 5, *nick, " ", *nick, " * :", *realname);
CMD(b->conn, "USER", NULL, name);
return 0;
}
else
{
fprintf(stderr, "Couldn't connect to %s:%d\n", server, port);
return -1;
}
}
开发者ID:Detegr，项目名称:CBot，代码行数:20，代码来源:bot.c
示例18: mpu401_uninit
int
mpu401_uninit(struct mpu401 *m)
{
int retval;
CMD(m, MPU_RESET);
retval = midi_uninit(m->mid);
if (retval)
return retval;
free(m, M_MIDI);
return 0;
}
开发者ID:ele7enxxh，项目名称:dtrace-pf，代码行数:12，代码来源:mpu401.c
示例19: define_arg_cmd
void define_arg_cmd(t_group *grp)
{
int i;
i = 0;
while (CMD(cmd_split) && CMD(cmd_split)[++i])
{
if (CMD(cmd_split)[i][0] == '-' &&
grp->define_cmd[namenv] == false &&
grp->define_cmd[utils] == false)
grp->define_cmd[e_opt] = i;
else if (is_env(CMD(cmd_split)[i]) > 0 &&
grp->define_cmd[utils] == false)
grp->define_cmd[namenv] = i;
else
{
grp->define_cmd[utils] = i;
break ;
}
}
}
开发者ID:jmontija，项目名称:21sh，代码行数:21，代码来源:pre_exec.c
示例20: bot_execcmd
int bot_execcmd(struct bot* b, char* msg)
{
char* p = strstr(msg, " ");
if(p)
{
*p=0;
CMD(b->conn, msg, NULL, ++p);
//printf("CMD: %s, TOKEN: %s\n", msg, p);
return 0;
}
return -1;
}
开发者ID:Detegr，项目名称:CBot，代码行数:12，代码来源:bot.c
注：本文中的CMD函数示例整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。 |
客服电话
APP下载
官方微信
请发表评论