本文整理汇总了C++中CL_WritePacket函数的典型用法代码示例。如果您正苦于以下问题：C++ CL_WritePacket函数的具体用法？C++ CL_WritePacket怎么用？C++ CL_WritePacket使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了CL_WritePacket函数的8个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: CL_Disconnect
/*
=====================
CL_Disconnect
Called when a connection, or cinematic is being terminated.
Goes from a connected state to either a menu state or a console state
Sends a disconnect message to the server
This is also called on Com_Error and Com_Quit, so it shouldn't cause any errors
=====================
*/
void CL_Disconnect( void ) {
if ( !com_cl_running || !com_cl_running->integer ) {
return;
}
if (cls.uiStarted)
UI_SetActiveMenu( NULL,NULL );
SCR_StopCinematic ();
S_ClearSoundBuffer();
// send a disconnect message to the server
// send it a few times in case one is dropped
if ( cls.state >= CA_CONNECTED ) {
CL_AddReliableCommand( "disconnect" );
CL_WritePacket();
CL_WritePacket();
CL_WritePacket();
}
CL_ClearState ();
CL_FreeReliableCommands();
extern void CL_FreeServerCommands(void);
CL_FreeServerCommands();
memset( &clc, 0, sizeof( clc ) );
cls.state = CA_DISCONNECTED;
// allow cheats locally
Cvar_Set( "timescale", "1" );//jic we were skipping
Cvar_Set( "skippingCinematic", "0" );//jic we were skipping
}
开发者ID:Delfin1，项目名称:OpenJK，代码行数:45，代码来源:cl_main.cpp
示例2: CL_Disconnect
/*
=====================
CL_Disconnect
Called when a connection, or cinematic is being terminated.
Goes from a connected state to either a menu state or a console state
Sends a disconnect message to the server
This is also called on Com_Error and Com_Quit, so it shouldn't cause any errors
=====================
*/
void CL_Disconnect( void ) {
if ( !com_cl_running || !com_cl_running->integer ) {
return;
}
#ifdef _XBOX
Cvar_Set("r_norefresh", "0");
// Make sure to stop all rumbling! - Prevents bug when quitting game during rumble:
extern void IN_KillRumbleScripts( void );
IN_KillRumbleScripts();
#endif
if (cls.uiStarted)
UI_SetActiveMenu( NULL,NULL );
SCR_StopCinematic ();
S_ClearSoundBuffer();
#ifdef _XBOX
// extern qboolean RE_RegisterImages_LevelLoadEnd(void);
// RE_RegisterImages_LevelLoadEnd();
R_DeleteTextures();
#endif
// send a disconnect message to the server
// send it a few times in case one is dropped
if ( cls.state >= CA_CONNECTED ) {
CL_AddReliableCommand( "disconnect" );
CL_WritePacket();
CL_WritePacket();
CL_WritePacket();
}
CL_ClearState ();
CL_FreeReliableCommands();
extern void CL_FreeServerCommands(void);
CL_FreeServerCommands();
memset( &clc, 0, sizeof( clc ) );
cls.state = CA_DISCONNECTED;
// allow cheats locally
Cvar_Set( "timescale", "1" );//jic we were skipping
Cvar_Set( "skippingCinematic", "0" );//jic we were skipping
}
开发者ID:Drakesinger，项目名称:jediacademypc，代码行数:59，代码来源:cl_main.cpp
示例3: CL_SendCmd
/*
=================
CL_SendCmd
Called every frame to builds and sends a command packet to the server.
=================
*/
void
CL_SendCmd(void)
{
// don't send any message if not connected
if (clc.state < CA_CONNECTED)
{
return;
}
// don't send commands if paused
if (com_sv_running->integer && sv_paused->integer && cl_paused->integer)
{
return;
}
// we create commands even if a demo is playing,
CL_CreateNewCommands();
// don't send a packet if the last packet was sent too recently
if (!CL_ReadyToSendPacket())
{
if (cl_showSend->integer)
{
Com_Printf(". ");
}
return;
}
CL_WritePacket();
}
开发者ID:lrq3000，项目名称:ioquake3-anti-cheat，代码行数:37，代码来源:cl_input.c
示例4: CL_SendCmd
/*
=================
CL_SendCmd
Called every frame to builds and sends a command packet to the server.
=================
*/
void CL_SendCmd( void )
{
// we create commands even if a demo is playing,
CL_CreateCmd();
// clc_move, userinfo etc
CL_WritePacket();
// make sure what menu and CL_WritePacket catch changes
userinfo->modified = false;
}
开发者ID:Reedych，项目名称:xash3d，代码行数:17，代码来源:cl_main.c
示例5: CL_Disconnect
/*
=====================
CL_Disconnect
Called when a connection, or cinematic is being terminated.
Goes from a connected state to either a menu state or a console state
Sends a disconnect message to the server
This is also called on Com_Error and Com_Quit, so it shouldn't cause any errors
=====================
*/
void CL_Disconnect( void ) {
int i;
if ( !com_cl_running || !com_cl_running->integer ) {
return;
}
if (cls.uiStarted)
UI_SetActiveMenu( NULL,NULL );
SCR_StopCinematic ();
S_ClearSoundBuffer();
// send a disconnect message to the server
// send it a few times in case one is dropped
if ( cls.state >= CA_CONNECTED ) {
CL_AddReliableCommand( "disconnect" );
CL_WritePacket();
CL_WritePacket();
CL_WritePacket();
}
CL_ClearState ();
// wipe the client connection
for ( i = 0 ; i < MAX_RELIABLE_COMMANDS ; i++ ) {
if ( clc.reliableCommands[i] ) {
Z_Free( clc.reliableCommands[i] );
}
}
memset( &clc, 0, sizeof( clc ) );
cls.state = CA_DISCONNECTED;
// allow cheats locally
Cvar_Set( "timescale", "1" );//jic we were skipping
Cvar_Set( "skippingCinematic", "0" );//jic we were skipping
}
开发者ID:Agustinlv，项目名称:BlueHarvest，代码行数:48，代码来源:cl_main.cpp
示例6: CL_ParseDownload
//.........这里部分代码省略.........
{
CL_AddReliableCommand( "wwwdl bbl8r" );
cls.bWWWDlDisconnected = qtrue;
}
return;
}
else
{
// server keeps sending that message till we ack it, eat and ignore
//MSG_ReadLong( msg );
MSG_ReadString( msg );
MSG_ReadLong( msg );
MSG_ReadLong( msg );
return;
}
}
if ( !block )
{
// block zero is special, contains file size
clc.downloadSize = MSG_ReadLong( msg );
Cvar_SetValue( "cl_downloadSize", clc.downloadSize );
if ( clc.downloadSize < 0 )
{
Com_Error( ERR_DROP, "%s", MSG_ReadString( msg ) );
}
}
size = MSG_ReadShort( msg );
if ( size < 0 || size > sizeof( data ) )
{
Com_Error( ERR_DROP, "CL_ParseDownload: Invalid size %d for download chunk.", size );
}
MSG_ReadData( msg, data, size );
if ( clc.downloadBlock != block )
{
Com_DPrintf( "CL_ParseDownload: Expected block %d, got %d\n", clc.downloadBlock, block );
return;
}
// open the file if not opened yet
if ( !clc.download )
{
clc.download = FS_SV_FOpenFileWrite( cls.downloadTempName );
if ( !clc.download )
{
Com_Printf(_( "Could not create %s\n"), cls.downloadTempName );
CL_AddReliableCommand( "stopdl" );
CL_NextDownload();
return;
}
}
if ( size )
{
FS_Write( data, size, clc.download );
}
CL_AddReliableCommand( va( "nextdl %d", clc.downloadBlock ) );
clc.downloadBlock++;
clc.downloadCount += size;
// So UI gets access to it
Cvar_SetValue( "cl_downloadCount", clc.downloadCount );
if ( !size )
{
// A zero length block means EOF
if ( clc.download )
{
FS_FCloseFile( clc.download );
clc.download = 0;
// rename the file
FS_SV_Rename( cls.downloadTempName, cls.downloadName );
}
*cls.downloadTempName = *cls.downloadName = 0;
Cvar_Set( "cl_downloadName", "" );
// send intentions now
// We need this because without it, we would hold the last nextdl and then start
// loading right away. If we take a while to load, the server is happily trying
// to send us that last block over and over.
// Write it twice to help make sure we acknowledge the download
CL_WritePacket();
CL_WritePacket();
// get another file if needed
CL_NextDownload();
}
}
开发者ID:justhacking，项目名称:Unvanquished，代码行数:101，代码来源:cl_parse.c
示例7: CL_cURL_BeginDownload
void CL_cURL_BeginDownload( const char *localName, const char *remoteURL )
{
clc.cURLUsed = qtrue;
Com_Printf("URL: %s\n", remoteURL);
Com_DPrintf("***** CL_cURL_BeginDownload *****\n"
"Localname: %s\n"
"RemoteURL: %s\n"
"****************************\n", localName, remoteURL);
CL_cURL_Cleanup();
Q_strncpyz(clc.downloadURL, remoteURL, sizeof(clc.downloadURL));
Q_strncpyz(clc.downloadName, localName, sizeof(clc.downloadName));
Com_sprintf(clc.downloadTempName, sizeof(clc.downloadTempName),
"%s.tmp", localName);
// Set so UI gets access to it
Cvar_Set("cl_downloadName", localName);
Cvar_Set("cl_downloadSize", "0");
Cvar_Set("cl_downloadCount", "0");
Cvar_SetValue("cl_downloadTime", cls.realtime);
clc.downloadBlock = 0; // Starting new file
clc.downloadCount = 0;
clc.downloadCURL = qcurl_easy_init();
if(!clc.downloadCURL) {
Com_Error(ERR_DROP, "CL_cURL_BeginDownload: qcurl_easy_init() "
"failed\n");
return;
}
clc.download = FS_SV_FOpenFileWrite(clc.downloadTempName);
if(!clc.download) {
Com_Error(ERR_DROP, "CL_cURL_BeginDownload: failed to open "
"%s for writing\n", clc.downloadTempName);
return;
}
qcurl_easy_setopt(clc.downloadCURL, CURLOPT_WRITEDATA, clc.download);
if(com_developer->integer)
qcurl_easy_setopt(clc.downloadCURL, CURLOPT_VERBOSE, 1);
qcurl_easy_setopt(clc.downloadCURL, CURLOPT_URL, clc.downloadURL);
qcurl_easy_setopt(clc.downloadCURL, CURLOPT_TRANSFERTEXT, 0);
qcurl_easy_setopt(clc.downloadCURL, CURLOPT_REFERER, va("ioQ3://%s",
NET_AdrToString(clc.serverAddress)));
qcurl_easy_setopt(clc.downloadCURL, CURLOPT_USERAGENT, va("%s %s",
Q3_VERSION, qcurl_version()));
qcurl_easy_setopt(clc.downloadCURL, CURLOPT_WRITEFUNCTION,
CL_cURL_CallbackWrite);
qcurl_easy_setopt(clc.downloadCURL, CURLOPT_WRITEDATA, &clc.download);
qcurl_easy_setopt(clc.downloadCURL, CURLOPT_NOPROGRESS, 0);
qcurl_easy_setopt(clc.downloadCURL, CURLOPT_PROGRESSFUNCTION,
CL_cURL_CallbackProgress);
qcurl_easy_setopt(clc.downloadCURL, CURLOPT_PROGRESSDATA, NULL);
qcurl_easy_setopt(clc.downloadCURL, CURLOPT_FAILONERROR, 1);
qcurl_easy_setopt(clc.downloadCURL, CURLOPT_FOLLOWLOCATION, 1);
qcurl_easy_setopt(clc.downloadCURL, CURLOPT_MAXREDIRS, 5);
clc.downloadCURLM = qcurl_multi_init();
if(!clc.downloadCURLM) {
qcurl_easy_cleanup(clc.downloadCURL);
clc.downloadCURL = NULL;
Com_Error(ERR_DROP, "CL_cURL_BeginDownload: qcurl_multi_init() "
"failed\n");
return;
}
qcurl_multi_add_handle(clc.downloadCURLM, clc.downloadCURL);
if(!(clc.sv_allowDownload & DLF_NO_DISCONNECT) &&
!clc.cURLDisconnected) {
CL_AddReliableCommand("disconnect");
CL_WritePacket();
CL_WritePacket();
CL_WritePacket();
clc.cURLDisconnected = qtrue;
}
}
开发者ID:tariqhamid，项目名称:quake3，代码行数:74，代码来源:cl_curl.c
示例8: CL_ParseDownload
/*
=====================
CL_ParseDownload
A download message has been received from the server
=====================
*/
void CL_ParseDownload ( msg_t *msg ) {
int size;
unsigned char data[MAX_MSGLEN];
uint16_t block;
if (!*clc.downloadTempName) {
Com_Printf("Server sending download, but no download was requested\n");
CL_AddReliableCommand("stopdl", qfalse);
return;
}
// read the data
block = MSG_ReadShort ( msg );
if(!block && !clc.downloadBlock)
{
// block zero is special, contains file size
clc.downloadSize = MSG_ReadLong ( msg );
Cvar_SetValue( "cl_downloadSize", clc.downloadSize );
if (clc.downloadSize < 0)
{
Com_Error( ERR_DROP, "%s", MSG_ReadString( msg ) );
return;
}
}
size = MSG_ReadShort ( msg );
if (size < 0 || size > sizeof(data))
{
Com_Error(ERR_DROP, "CL_ParseDownload: Invalid size %d for download chunk", size);
return;
}
MSG_ReadData(msg, data, size);
if((clc.downloadBlock & 0xFFFF) != block)
{
Com_DPrintf( "CL_ParseDownload: Expected block %d, got %d\n", (clc.downloadBlock & 0xFFFF), block);
return;
}
// open the file if not opened yet
if (!clc.download)
{
clc.download = FS_SV_FOpenFileWrite( clc.downloadTempName );
if (!clc.download) {
Com_Printf( "Could not create %s\n", clc.downloadTempName );
CL_AddReliableCommand("stopdl", qfalse);
CL_NextDownload();
return;
}
}
if (size)
FS_Write( data, size, clc.download );
CL_AddReliableCommand(va("nextdl %d", clc.downloadBlock), qfalse);
clc.downloadBlock++;
clc.downloadCount += size;
// So UI gets access to it
Cvar_SetValue( "cl_downloadCount", clc.downloadCount );
if (!size) { // A zero length block means EOF
if (clc.download) {
FS_FCloseFile( clc.download );
clc.download = 0;
// rename the file
FS_SV_Rename ( clc.downloadTempName, clc.downloadName, qfalse );
}
// send intentions now
// We need this because without it, we would hold the last nextdl and then start
// loading right away. If we take a while to load, the server is happily trying
// to send us that last block over and over.
// Write it twice to help make sure we acknowledge the download
CL_WritePacket();
CL_WritePacket();
// get another file if needed
CL_NextDownload ();
}
}
开发者ID:darklegion，项目名称:tremulous，代码行数:95，代码来源:cl_parse.c
注：本文中的CL_WritePacket函数示例整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。 |
客服电话
APP下载
官方微信
请发表评论