C++ BRDATA函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中BRDATA函数的典型用法代码示例。如果您正苦于以下问题：C++ BRDATA函数的具体用法？C++ BRDATA怎么用？C++ BRDATA使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了BRDATA函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: UDATA

   cdr_dev      CDR descriptor
   cdr_unit     CDR unit descriptor
   cdr_reg      CDR register list
*/

DIB cdr_dib = { &cdr_chsel, NULL };

UNIT cdr_unit = {
    UDATA (&cdr_svc, UNIT_SEQ+UNIT_ATTABLE+UNIT_ROABLE+UNIT_TEXT, 0)
    };

REG cdr_reg[] = {
    { ORDATA (STATE, cdr_sta, 2) },
    { DRDATA (BPTR, cdr_bptr, 5), PV_LEFT },
    { BRDATA (BUF, cdr_bbuf, 8, 36, CD_BINLNT) },
    { DRDATA (POS, cdr_unit.pos, T_ADDR_W), PV_LEFT },
    { DRDATA (TSTART, cdr_tstart, 24), PV_LEFT + REG_NZ },
    { DRDATA (TSTOP, cdr_tstop, 24), PV_LEFT + REG_NZ },
    { DRDATA (TLEFT, cdr_tleft, 24), PV_LEFT + REG_NZ },
    { DRDATA (TRIGHT, cdr_tright, 24), PV_LEFT + REG_NZ },
    { NULL }  };

MTAB cdr_mod[] = {
    { UNIT_CBN, UNIT_CBN, "column binary", "BINARY", &cd_set_mode },
    { UNIT_CBN, UNIT_CBN, "text", "TEXT", &cd_set_mode },
    { 0 }
    };

DEVICE cdr_dev = {
    "CDR", &cdr_unit, cdr_reg, cdr_mod,

开发者ID:ST3ALth，项目名称:simh，代码行数:30，代码来源:i7094_cd.c

示例2: UDATA

   clk_mod      CLK modifiers
   clk_reg      CLK register list
*/

DIB clk_dib = { &clkio, CLK };

UNIT clk_unit = { UDATA (&clk_svc, UNIT_IDLE, 0) };

REG clk_reg[] = {
    { ORDATA (SEL, clk_select, 3) },
    { DRDATA (CTR, clk_ctr, 14) },
    { FLDATA (CTL, clk.control, 0) },
    { FLDATA (FLG, clk.flag, 0) },
    { FLDATA (FBF, clk.flagbuf, 0) },
    { FLDATA (ERR, clk_error, CLK_V_ERROR) },
    { BRDATA (TIME, clk_time, 10, 24, 8) },
    { DRDATA (IPTICK, clk_tick, 24), PV_RSPC | REG_RO },
    { ORDATA (SC, clk_dib.select_code, 6), REG_HRO },
    { ORDATA (DEVNO, clk_dib.select_code, 6), REG_HRO },
    { NULL }
    };

MTAB clk_mod[] = {
    { UNIT_DIAG, UNIT_DIAG, "diagnostic mode", "DIAG", NULL },
    { UNIT_DIAG, 0, "calibrated", "CALIBRATED", NULL },
    { MTAB_XTD | MTAB_VDV,            0, "SC",    "SC",    &hp_setsc,  &hp_showsc,  &clk_dev },
    { MTAB_XTD | MTAB_VDV | MTAB_NMO, 0, "DEVNO", "DEVNO", &hp_setdev, &hp_showdev, &clk_dev },
    { 0 }
    };

DEVICE clk_dev = {

开发者ID:ProtoSD，项目名称:simh，代码行数:31，代码来源:hp2100_stddev.c

示例3: dcs_vlines

t_stat dcs_vlines (UNIT *uptr, int32 val, char *cptr, void *desc);
void dcs_reset_ln (int32 ln);
void dcs_scan_next (t_bool unlk);

/* DCS data structures

   dcs_dev      DCS device descriptor
   dcs_unit     DCS unit descriptor
   dcs_reg      DCS register list
   dcs_mod      DCS modifiers list
*/

UNIT dcs_unit = { UDATA (&dcsi_svc, UNIT_ATTABLE, 0) };

REG dcs_reg[] = {
    { BRDATA (BUF, dcs_buf, 8, 8, DCS_LINES) },
    { BRDATA (FLAGS, dcs_flg, 8, 1, DCS_LINES) },
    { FLDATA (SCNF, iosta, IOS_V_DCS) },
    { ORDATA (SCAN, dcs_scan, 5) },
    { ORDATA (SEND, dcs_send, 5) },
    { DRDATA (SBSLVL, dcs_sbs, 4), REG_HRO },
    { NULL }
    };

MTAB dcs_mod[] = {
    { MTAB_XTD|MTAB_VDV, 0, "SBSLVL", "SBSLVL",
      &dev_set_sbs, &dev_show_sbs, (void *) &dcs_sbs },
    { MTAB_XTD | MTAB_VDV, 0, "LINES", "LINES",
      &dcs_vlines, &tmxr_show_lines, (void *) &dcs_desc },
    { MTAB_XTD | MTAB_VDV, 1, NULL, "DISCONNECT",
      &tmxr_dscln, NULL, (void *) &dcs_desc },

开发者ID:B-Rich，项目名称:simh，代码行数:31，代码来源:pdp1_dcs.c

示例4: UDATA

UNIT fl_unit = { UDATA (&fl_svc,
      UNIT_FIX+UNIT_ATTABLE+UNIT_BUFABLE+UNIT_MUSTBUF, FL_SIZE) };

REG fl_reg[] = {
    { HRDATA (FNC, fl_fnc, 8) },
    { HRDATA (ES, fl_esr, 8) },
    { HRDATA (ECODE, fl_ecode, 8) },
    { HRDATA (TA, fl_track, 8) },
    { HRDATA (SA, fl_sector, 8) },
    { DRDATA (STATE, fl_state, 4), REG_RO },
    { DRDATA (BPTR, fl_bptr, 7)  },
    { DRDATA (CTIME, fl_cwait, 24), PV_LEFT },
    { DRDATA (STIME, fl_swait, 24), PV_LEFT },
    { DRDATA (XTIME, fl_xwait, 24), PV_LEFT },
    { FLDATA (STOP_IOE, fl_stopioe, 0) },
    { BRDATA (DBUF, fl_buf, 16, 8, FL_NUMBY) },
    { BRDATA (COMM, comm_region, 16, 8, COMM_LNT) },
    { NULL }
    };

MTAB fl_mod[] = {
    { UNIT_WLK, 0, "write enabled", "WRITEENABLED", NULL },
    { UNIT_WLK, UNIT_WLK, "write locked", "LOCKED", NULL },
    { 0 }
    };

DEVICE fl_dev = {
    "RX", &fl_unit, fl_reg, fl_mod,
    1, DEV_RDX, 20, 1, DEV_RDX, 8,
    NULL, NULL, &fl_reset,
    NULL, NULL, NULL,

开发者ID:jehurodrig，项目名称:simh-pre-git，代码行数:31，代码来源:vax780_stddev.c

示例5: ORDATA

	{ ORDATA (RXTA, rx_track, 8) },
	{ ORDATA (RXSA, rx_sector, 8) },
	{ ORDATA (STAPTR, rx_state, 3), REG_RO },
	{ ORDATA (BUFPTR, bptr, 7)  },
	{ FLDATA (INT, int_req, INT_V_RX) },
	{ FLDATA (ERR, rx_csr, CSR_V_ERR) },
	{ FLDATA (TR, rx_csr, RXCS_V_TR) },
	{ FLDATA (IE, rx_csr, CSR_V_IE) },
	{ FLDATA (DONE, rx_csr, RXCS_V_DONE) },
	{ DRDATA (CTIME, rx_cwait, 24), PV_LEFT },
	{ DRDATA (STIME, rx_swait, 24), PV_LEFT },
	{ DRDATA (XTIME, rx_xwait, 24), PV_LEFT },
	{ FLDATA (FLG0, rx_unit[0].flags, UNIT_V_WLK), REG_HRO },
	{ FLDATA (FLG1, rx_unit[1].flags, UNIT_V_WLK), REG_HRO },
	{ FLDATA (STOP_IOE, rx_stopioe, 0) },
	{ BRDATA (**BUF, buf, 8, 8, RX_NUMBY), REG_HRO },
	{ NULL }  };

MTAB rx_mod[] = {
	{ UNIT_WLK, 0, "write enabled", "ENABLED", NULL },
	{ UNIT_WLK, UNIT_WLK, "write locked", "LOCKED", NULL },
	{ 0 }  };

DEVICE rx_dev = {
	"RX", rx_unit, rx_reg, rx_mod,
	RX_NUMDR, 8, 20, 1, 8, 8,
	NULL, NULL, &rx_reset,
	&rx_boot, NULL, NULL };

/* I/O dispatch routine, I/O addresses 17777170 - 17777172

开发者ID:HarryR，项目名称:sanos，代码行数:30，代码来源:pdp11_rx.c

示例6: UDATA

   ttix_dev     TTIx device descriptor
   ttix_unit    TTIx unit descriptor
   ttix_reg     TTIx register list
   ttix_mod     TTIx modifiers list
*/

DIB ttix_dib = { 
    DEV_TTO1, 8, NULL,
    { &ttox, &ttix, &ttox, &ttix, &ttox, &ttix, &ttox, &ttix }
    };

UNIT ttix_unit = { UDATA (&ttix_svc, UNIT_IDLE|UNIT_ATTABLE, 0), KBD_POLL_WAIT };

REG ttix_reg[] = {
    { BRDATA (BUF, ttix_buf, 8, 8, TTX_MAXL) },
    { ORDATA (DONE, ttix_done, TTX_MAXL) },
    { FLDATA (INT, int_hwre[API_TTI1], INT_V_TTI1) },
    { DRDATA (TIME, ttix_unit.wait, 24), REG_NZ + PV_LEFT },
    { ORDATA (DEVNUM, ttix_dib.dev, 6), REG_HRO },
    { NULL }
    };

MTAB ttix_mod[] = {
    { MTAB_XTD | MTAB_VDV, 0, "LINES", "LINES",
      &ttx_vlines, &tmxr_show_lines, (void *) &ttx_desc },
    { UNIT_ATT, UNIT_ATT, "summary", NULL,
      NULL, &tmxr_show_summ, (void *) &ttx_desc },
    { MTAB_XTD | MTAB_VDV, 1, NULL, "DISCONNECT",
      &tmxr_dscln, NULL, (void *) &ttx_desc },
    { MTAB_XTD | MTAB_VDV | MTAB_NMO, 1, "CONNECTIONS", NULL,

开发者ID:alexchenfeng，项目名称:UNIXV6，代码行数:30，代码来源:pdp18b_tt1.c

示例7: UDATA

             UNIT_ROABLE+(TYPE_5440 << UNIT_V_DTYPE), SIZE_5440) },
    { UDATA (&dp_svc, UNIT_FIX+UNIT_ATTABLE+UNIT_DISABLE+
             UNIT_ROABLE+(TYPE_5440 << UNIT_V_DTYPE), SIZE_5440) },
    { UDATA (&dp_svc, UNIT_FIX+UNIT_ATTABLE+UNIT_DISABLE+
             UNIT_ROABLE+(TYPE_5440 << UNIT_V_DTYPE), SIZE_5440) }
    };

REG dp_reg[] = {
    { HRDATA (CMD, dp_cmd, 3) },
    { HRDATA (STA, dp_sta, 8) },
    { HRDATA (BUF, dp_db, 8) },
    { HRDATA (PLAT, dp_plat, 1) },
    { HRDATA (HDSC, dp_hdsc, 6) },
    { HRDATA (CYL, dp_cyl, 9) },
    { HRDATA (SVUN, dp_svun, 8), REG_HIDDEN },
    { BRDATA (DBUF, dpxb, 16, 8, DP_NUMBY) },
    { HRDATA (DBPTR, dp_bptr, 9), REG_RO },
    { FLDATA (FIRST, dp_1st, 0) },
    { GRDATA (IREQ, int_req[l_DPC], 16, DP_NUMDR + 1, i_DPC) },
    { GRDATA (IENB, int_enb[l_DPC], 16, DP_NUMDR + 1, i_DPC) },
    { BRDATA (IARM, dpd_arm, 16, 1, DP_NUMDR) },
    { DRDATA (RTIME, dp_rtime, 0), PV_LEFT | REG_NZ },
    { DRDATA (STIME, dp_stime, 0), PV_LEFT | REG_NZ },
    { DRDATA (WTIME, dp_wtime, 0), PV_LEFT | REG_NZ },
    { URDATA (UCYL, dp_unit[0].CYL, 16, 9, 0,
              DP_NUMDR, REG_RO) },
    { URDATA (UST, dp_unit[0].STD, 16, 8, 0,
              DP_NUMDR, REG_RO) },
    { URDATA (CAPAC, dp_unit[0].capac, 10, T_ADDR_W, 0,
              DP_NUMDR, PV_LEFT | REG_HRO) },
    { HRDATA (DEVNO, dp_dib.dno, 8), REG_HRO },

开发者ID:B-Rich，项目名称:simh，代码行数:31，代码来源:id_dp.c

示例8: ORDATA

    { ORDATA (RXES, rx_esr, 8) },
    { ORDATA (RXERR, rx_ecode, 8) },
    { ORDATA (RXTA, rx_track, 8) },
    { ORDATA (RXSA, rx_sector, 8) },
    { DRDATA (STAPTR, rx_state, 3), REG_RO },
    { DRDATA (BUFPTR, rx_bptr, 7)  },
    { FLDATA (INT, IREQ (RX), INT_V_RX) },
    { FLDATA (ERR, rx_csr, RXCS_V_ERR) },
    { FLDATA (TR, rx_csr, RXCS_V_TR) },
    { FLDATA (IE, rx_csr, RXCS_V_IE) },
    { FLDATA (DONE, rx_csr, RXCS_V_DONE) },
    { DRDATA (CTIME, rx_cwait, 24), PV_LEFT },
    { DRDATA (STIME, rx_swait, 24), PV_LEFT },
    { DRDATA (XTIME, rx_xwait, 24), PV_LEFT },
    { FLDATA (STOP_IOE, rx_stopioe, 0) },
    { BRDATA (SBUF, rx_buf, 8, 8, RX_NUMBY) },
    { ORDATA (DEVADDR, rx_dib.ba, 32), REG_HRO },
    { ORDATA (DEVVEC, rx_dib.vec, 16), REG_HRO },
    { NULL }
    };

MTAB rx_mod[] = {
    { UNIT_WLK, 0, "write enabled", "WRITEENABLED", NULL },
    { UNIT_WLK, UNIT_WLK, "write locked", "LOCKED", NULL },
#if defined (VM_PDP11)
    { MTAB_XTD|MTAB_VDV, 004, "ADDRESS", "ADDRESS",
      &set_addr, &show_addr, NULL },
    { MTAB_XTD | MTAB_VDV, 0, NULL, "AUTOCONFIGURE",
      &set_addr_flt, NULL, NULL },
    { MTAB_XTD|MTAB_VDV, 0, "VECTOR", "VECTOR",
      &set_vec, &show_vec, NULL },

开发者ID:ProtoSD，项目名称:simh，代码行数:31，代码来源:pdp11_rx.c

示例9: UDATA

   mux_dev      MUX device descriptor
   mux_unit     MUX unit descriptor
   mux_reg      MUX register list
   mux_mod      MUX modifiers list
*/

dib_t mux_dib = { DVA_MUX, &mux_disp, DIO_MUX, &mux_dio };

UNIT mux_unit[] = {
    { UDATA (&muxc_svc, UNIT_ATTABLE, 0) },
    { UDATA (&muxi_rtc_svc, UNIT_DIS, 0) }
};

REG mux_reg[] = {
    { BRDATA (STA, mux_sta, 16, 8, MUX_LINES) },
    { BRDATA (RBUF, mux_rbuf, 16, 8, MUX_LINES) },
    { BRDATA (XBUF, mux_xbuf, 16, 8, MUX_LINES) },
    { DRDATA (SCAN, mux_scan, 6) },
    { FLDATA (SLCK, mux_slck, 0) },
    { DRDATA (CMD, muxc_cmd, 2) },
    { DRDATA (TPS, mux_tps, 8), REG_HRO },
    { NULL }
};

MTAB mux_mod[] = {
    {   MTAB_XTD | MTAB_VDV, 1, NULL, "DISCONNECT",
        &tmxr_dscln, NULL, &mux_desc
    },
    {   UNIT_ATT, UNIT_ATT, "summary", NULL,
        NULL, &tmxr_show_summ, (void *) &mux_desc

开发者ID:SysMan-One，项目名称:simh，代码行数:30，代码来源:sigma_coc.c

示例10: UDATA

/* LP data structures

   lp_dev       LP device descriptor
   lp_unit      LP unit descriptors
   lp_reg       LP register list
   lp_mod       LP modifiers list
*/

dib_t lp_dib = { DVA_LP, lp_disp, 0, NULL };

UNIT lp_unit = { UDATA (&lp_svc, UNIT_ATTABLE+UNIT_SEQ, 0), SERIAL_OUT_WAIT };

REG lp_reg[] = {
    { HRDATA (CMD, lp_cmd, 9) },
    { BRDATA (BUF, lp_buf, 16, 7, BUF_LNT4) },
    { FLDATA (PASS, lp_pass, 0) },
    { FLDATA (INH, lp_inh, 0) },
    { FLDATA (RUNAWAY, lp_run, LPDV_V_RUN) },
    { BRDATA (CCT, lp_cct, 8, 8, CCT_LNT) },
    { DRDATA (CCTP, lp_cctp, 8), PV_LEFT },
    { DRDATA (CCTL, lp_cctl, 8), PV_LEFT + REG_HRO + REG_NZ },
    { DRDATA (POS, lp_unit.pos, T_ADDR_W), PV_LEFT },
    { DRDATA (TIME, lp_unit.wait, 24), PV_LEFT },
    { FLDATA (STOP_IOE, lp_stopioe, 0) },
    { HRDATA (LASTC, lp_lastcmd, 8), REG_HIDDEN },
    { FLDATA (MODEL, lp_model, 0), REG_HRO },
    { HRDATA (DEVNO, lp_dib.dva, 12), REG_HRO },
    { NULL }
    };

开发者ID:charlesUnixPro，项目名称:simh，代码行数:29，代码来源:sigma_lp.c

示例11: GRDATA

    { GRDATA (RYWC, ry_wc, DEV_RDX, 8, 0) },
    { GRDATA (RYDB, ry_dbr, DEV_RDX, 16, 0) },
    { GRDATA (RYES, ry_esr, DEV_RDX, 12, 0) },
    { GRDATA (RYERR, ry_ecode, DEV_RDX, 8, 0) },
    { GRDATA (RYTA, ry_track, DEV_RDX, 8, 0) },
    { GRDATA (RYSA, ry_sector, DEV_RDX, 8, 0) },
    { DRDATA (STAPTR, ry_state, 4), REG_RO },
    { FLDATA (INT, IREQ (RY), INT_V_RY) },
    { FLDATA (ERR, ry_csr, RYCS_V_ERR) },
    { FLDATA (TR, ry_csr, RYCS_V_TR) },
    { FLDATA (IE, ry_csr, RYCS_V_IE) },
    { FLDATA (DONE, ry_csr, RYCS_V_DONE) },
    { DRDATA (CTIME, ry_cwait, 24), PV_LEFT },
    { DRDATA (STIME, ry_swait, 24), PV_LEFT },
    { DRDATA (XTIME, ry_xwait, 24), PV_LEFT },
    { BRDATA (SBUF, rx2xb, 8, 8, RY_NUMBY) },
    { FLDATA (STOP_IOE, ry_stopioe, 0) },
    { URDATA (CAPAC, ry_unit[0].capac, 10, T_ADDR_W, 0,
              RX_NUMDR, REG_HRO | PV_LEFT) },
    { GRDATA (DEVADDR, ry_dib.ba, DEV_RDX, 32, 0), REG_HRO },
    { GRDATA (DEVVEC, ry_dib.vec, DEV_RDX, 16, 0), REG_HRO },
    { NULL }
    };

MTAB ry_mod[] = {
    { UNIT_WLK, 0, "write enabled", "WRITEENABLED", NULL },
    { UNIT_WLK, UNIT_WLK, "write locked", "LOCKED", NULL },
    { (UNIT_DEN+UNIT_ATT), UNIT_ATT, "single density", NULL, NULL },
    { (UNIT_DEN+UNIT_ATT), (UNIT_DEN+UNIT_ATT), "double density", NULL, NULL },
    { (UNIT_AUTO+UNIT_DEN+UNIT_ATT), 0, "single density", NULL, NULL },
    { (UNIT_AUTO+UNIT_DEN+UNIT_ATT), UNIT_DEN, "double density", NULL, NULL },

开发者ID:denrusio，项目名称:vak-opensource，代码行数:31，代码来源:pdp11_ry.c

示例12: UDATA

/* LPT data structures

   lpt_dev      LPT device descriptor
   lpt_unit     LPT unit descriptors
   lpt_reg      LPT register list
*/

DIB lpt_dib = { d_LPT, -1, v_LPT, NULL, &lpt, NULL };

UNIT lpt_unit = { UDATA (&lpt_svc, UNIT_SEQ+UNIT_ATTABLE+UNIT_UC+UNIT_TEXT, 0) };

REG lpt_reg[] = {
    { HRDATA (STA, lpt_sta, 8) },
    { HRDATA (BUF, lpt_unit.buf, 7) },
    { BRDATA (DBUF, lpxb, 16, 7, LPT_WIDTH) },
    { HRDATA (DBPTR, lpt_bptr, 8) },
    { HRDATA (VFUP, lpt_vfup, 8) },
    { HRDATA (VFUL, lpt_vful, 8) },
    { BRDATA (VFUT, lpt_vfut, 16, 8, VFU_LNT) },
    { FLDATA (IREQ, int_req[l_LPT], i_LPT) },
    { FLDATA (IENB, int_enb[l_LPT], i_LPT) },
    { FLDATA (IARM, lpt_arm, 0) },
    { DRDATA (POS, lpt_unit.pos, T_ADDR_W), PV_LEFT },
    { DRDATA (CTIME, lpt_ctime, 24), PV_LEFT },
    { DRDATA (STIME, lpt_stime, 24), PV_LEFT },
    { FLDATA (STOP_IOE, lpt_stopioe, 0) },
    { HRDATA (DEVNO, lpt_dib.dno, 8), REG_HRO },
    { NULL }
    };

开发者ID:ST3ALth，项目名称:simh，代码行数:29，代码来源:id_lp.c

示例13: UDATA

static UNIT fif_unit[] = {
    { UDATA (NULL, UNIT_FIX + UNIT_ATTABLE + UNIT_DISABLE + UNIT_ROABLE, MAX_DSK_SIZE) },
    { UDATA (NULL, UNIT_FIX + UNIT_ATTABLE + UNIT_DISABLE + UNIT_ROABLE, MAX_DSK_SIZE) },
    { UDATA (NULL, UNIT_FIX + UNIT_ATTABLE + UNIT_DISABLE + UNIT_ROABLE, MAX_DSK_SIZE) },
    { UDATA (NULL, UNIT_FIX + UNIT_ATTABLE + UNIT_DISABLE + UNIT_ROABLE, MAX_DSK_SIZE) },
    { UDATA (NULL, UNIT_FIX + UNIT_ATTABLE + UNIT_DISABLE + UNIT_ROABLE, MAX_DSK_SIZE) },
    { UDATA (NULL, UNIT_FIX + UNIT_ATTABLE + UNIT_DISABLE + UNIT_ROABLE, MAX_DSK_SIZE) },
    { UDATA (NULL, UNIT_FIX + UNIT_ATTABLE + UNIT_DISABLE + UNIT_ROABLE, MAX_DSK_SIZE) },
    { UDATA (NULL, UNIT_FIX + UNIT_ATTABLE + UNIT_DISABLE + UNIT_ROABLE, MAX_DSK_SIZE) }
};

static REG fif_reg[] = {
    { DRDATA (DISK,         current_disk,   4)                                          },
    { DRDATA (DSKWL,        warnLevelDSK, 32)                                           },
    { BRDATA (WARNLOCK,     warnLock,       10, 32, NUM_OF_DSK),    REG_CIRC + REG_RO   },
    { BRDATA (WARNATTACHED, warnAttached,   10, 32, NUM_OF_DSK),    REG_CIRC + REG_RO   },
    { DRDATA (WARNDSK11,    warnDSK11, 4),                          REG_RO              },
    { NULL }
};

static MTAB fif_mod[] = {
    { MTAB_XTD|MTAB_VDV, 0,                 "IOBASE",   "IOBASE",   &set_iobase, &show_iobase, NULL },
    { UNIT_DSK_WLK,     0,                  "WRTENB",   "WRTENB",   NULL },
    { UNIT_DSK_WLK,     UNIT_DSK_WLK,       "WRTLCK",   "WRTLCK",   NULL },
    /* quiet, no warning messages       */
    { UNIT_DSK_VERBOSE, 0,                  "QUIET",    "QUIET",    NULL },
    /* verbose, show warning messages   */
    { UNIT_DSK_VERBOSE, UNIT_DSK_VERBOSE,   "VERBOSE",  "VERBOSE",  &fif_set_verbose },
    { 0 }
};

开发者ID:BillHeaton，项目名称:simh，代码行数:30，代码来源:s100_fif.c

示例14: UDATA

   lpt_reg      LPT register list
*/

DIB lpt_dib = { &lpt_chsel, &lpt_chwr };

UNIT lpt_unit = {
    UDATA (&lpt_svc, UNIT_SEQ+UNIT_ATTABLE+UNIT_CONS+UNIT_TEXT, 0)
    };

REG lpt_reg[] = {
    { ORDATA (STATE, lpt_sta, 2) },
    { ORDATA (CMD, lpt_cmd, 2) },
    { ORDATA (CHOB, lpt_chob, 36) },
    { FLDATA (CHOBV, lpt_chob_v, 0) },
    { DRDATA (BPTR, lpt_bptr, 6), PV_LEFT },
    { BRDATA (BUF, lpt_bbuf, 8, 36, LPT_BINLNT) },
    { BRDATA (EBUF, lpt_ebuf, 8, 36, LPT_ECHLNT) },
    { DRDATA (POS, lpt_unit.pos, T_ADDR_W), PV_LEFT },
    { DRDATA (TSTART, lpt_tstart, 24), PV_LEFT + REG_NZ },
    { DRDATA (TSTOP, lpt_tstop, 24), PV_LEFT + REG_NZ },
    { DRDATA (TLEFT, lpt_tleft, 24), PV_LEFT + REG_NZ },
    { DRDATA (TRIGHT, lpt_tright, 24), PV_LEFT + REG_NZ },
    { NULL }
    };

MTAB lpt_mod[] = {
    { UNIT_CONS, UNIT_CONS, "default to console", "DEFAULT" },
    { UNIT_CONS, 0        , "no default device", "NODEFAULT" },
    { UNIT_48, UNIT_48, "48 character chain", "48" },
    { UNIT_48, 0,       "64 character chain", "64" },
    { UNIT_BZ, UNIT_BZ, "business set", "BUSINESS" },

开发者ID:ST3ALth，项目名称:simh，代码行数:31，代码来源:i7094_lp.c

示例15: eval_int

extern int32 eval_int (void);

/* SYSD data structures

   sysd_dev     SYSD device descriptor
   sysd_unit    SYSD units
   sysd_reg     SYSD register list
*/

UNIT sysd_unit = { UDATA (NULL, 0, 0) };

REG sysd_reg[] = {
    { HRDATAD (CONISP, conisp, 32, "console ISP") },
    { HRDATAD (CONPC,   conpc, 32, "console PD") },
    { HRDATAD (CONPSL, conpsl, 32, "console PSL") },
    { BRDATA (BOOTCMD, cpu_boot_cmd, 16, 8, CBUFSIZE), REG_HRO },
    { NULL }
    };

DEVICE sysd_dev = {
    "SYSD", &sysd_unit, sysd_reg, NULL,
    1, 16, 16, 1, 16, 8,
    NULL, NULL, &sysd_reset,
    NULL, NULL, NULL,
    NULL, 0, 0, NULL, NULL, NULL, NULL, NULL, NULL, 
    &sysd_description
    };

/* Special boot command, overrides regular boot */

CTAB vax610_cmd[] = {

开发者ID:B-Rich，项目名称:simh，代码行数:31，代码来源:vax610_sysdev.c

示例16: UDATA

*/

DIB dq_dib[] = {
    { &dqdio, DQD },
    { &dqcio, DQC }
    };

#define dqd_dib dq_dib[0]
#define dqc_dib dq_dib[1]

UNIT dqd_unit = { UDATA (&dqd_svc, 0, 0) };

REG dqd_reg[] = {
    { ORDATA (IBUF, dqd_ibuf, 16) },
    { ORDATA (OBUF, dqd_obuf, 16) },
    { BRDATA (DBUF, dqxb, 8, 16, DQ_NUMWD) },
    { DRDATA (BPTR, dq_ptr, DQ_N_NUMWD) },
    { FLDATA (CMD, dqd.command, 0) },
    { FLDATA (CTL, dqd.control, 0) },
    { FLDATA (FLG, dqd.flag,    0) },
    { FLDATA (FBF, dqd.flagbuf, 0) },
    { FLDATA (XFER, dqd_xfer, 0) },
    { FLDATA (WVAL, dqd_wval, 0) },
    { ORDATA (SC, dqd_dib.select_code, 6), REG_HRO },
    { ORDATA (DEVNO, dqd_dib.select_code, 6), REG_HRO },
    { NULL }
    };

MTAB dqd_mod[] = {
    { MTAB_XTD | MTAB_VDV,            1, "SC",    "SC",    &hp_setsc,  &hp_showsc,  &dqd_dev },
    { MTAB_XTD | MTAB_VDV | MTAB_NMO, 1, "DEVNO", "DEVNO", &hp_setdev, &hp_showdev, &dqd_dev },

开发者ID:andreax79，项目名称:simh，代码行数:31，代码来源:hp2100_dq.c

示例17: UDATA

    { UDATA (&mtu_svc, UNIT_ATTABLE+UNIT_ROABLE+UNIT_DISABLE, 0) },
    { UDATA (&mtu_svc, UNIT_ATTABLE+UNIT_ROABLE+UNIT_DISABLE, 0) },
    { UDATA (&mtu_svc, UNIT_ATTABLE+UNIT_ROABLE+UNIT_DISABLE, 0) },
    { UDATA (&mtu_svc, UNIT_ATTABLE+UNIT_ROABLE+UNIT_DISABLE, 0) },
    { UDATA (&mtr_svc, UNIT_DIS, 0) },
    { UDATA (&mtr_svc, UNIT_DIS, 0) },
    { UDATA (&mtr_svc, UNIT_DIS, 0) },
    { UDATA (&mtr_svc, UNIT_DIS, 0) },
    { UDATA (&mtr_svc, UNIT_DIS, 0) },
    { UDATA (&mtr_svc, UNIT_DIS, 0) },
    { UDATA (&mtr_svc, UNIT_DIS, 0) },
    { UDATA (&mtr_svc, UNIT_DIS, 0) }
    };

REG mt_reg[] = {
    { BRDATA (BUF, mt_xb, 16, 8, MT_MAXFR) },
    { DRDATA (BPTR, mt_bptr, 17) },
    { DRDATA (BLNT, mt_blim, 17) },
    { HRDATA (RWINT, mt_rwi, MT_NUMDR) },
    { DRDATA (TIME, mt_time, 24), PV_LEFT+REG_NZ },
    { DRDATA (CTIME, mt_ctime, 24), PV_LEFT+REG_NZ },
    { DRDATA (RWTIME, mt_rwtime, 24), PV_LEFT+REG_NZ },
    { URDATA (UST, mt_unit[0].UST, 16, 8, 0, MT_NUMDR, 0) },
    { URDATA (UCMD, mt_unit[0].UCMD, 16, 8, 0, 2 * MT_NUMDR, 0) },
    { URDATA (POS, mt_unit[0].pos, 10, T_ADDR_W, 0,
              MT_NUMDR, PV_LEFT | REG_RO) },
    { FLDATA (STOP_IOE, mt_stopioe, 0) },
    { HRDATA (DEVNO, mt_dib.dva, 12), REG_HRO },
    { NULL }
    };

开发者ID:ProtoSD，项目名称:simh，代码行数:30，代码来源:sigma_mt.c

示例18: UDATA

/* 88DSK Standard I/O Data Structures */

static UNIT dsk_unit[] = {
    { UDATA (NULL, UNIT_FIX + UNIT_ATTABLE + UNIT_DISABLE + UNIT_ROABLE, MAX_DSK_SIZE) },
    { UDATA (NULL, UNIT_FIX + UNIT_ATTABLE + UNIT_DISABLE + UNIT_ROABLE, MAX_DSK_SIZE) },
    { UDATA (NULL, UNIT_FIX + UNIT_ATTABLE + UNIT_DISABLE + UNIT_ROABLE, MAX_DSK_SIZE) },
    { UDATA (NULL, UNIT_FIX + UNIT_ATTABLE + UNIT_DISABLE + UNIT_ROABLE, MAX_DSK_SIZE) },
    { UDATA (NULL, UNIT_FIX + UNIT_ATTABLE + UNIT_DISABLE + UNIT_ROABLE, MAX_DSK_SIZE) },
    { UDATA (NULL, UNIT_FIX + UNIT_ATTABLE + UNIT_DISABLE + UNIT_ROABLE, MAX_DSK_SIZE) },
    { UDATA (NULL, UNIT_FIX + UNIT_ATTABLE + UNIT_DISABLE + UNIT_ROABLE, MAX_DSK_SIZE) },
    { UDATA (NULL, UNIT_FIX + UNIT_ATTABLE + UNIT_DISABLE + UNIT_ROABLE, MAX_DSK_SIZE) }
};

static REG dsk_reg[] = {
    { DRDATA (DISK,         current_disk,   4)                                          },
    { BRDATA (CURTRACK,     current_track,  10, 32, NUM_OF_DSK),    REG_CIRC + REG_RO   },
    { BRDATA (CURSECTOR,    current_sector, 10, 32, NUM_OF_DSK),    REG_CIRC + REG_RO   },
    { BRDATA (CURBYTE,      current_byte,   10, 32, NUM_OF_DSK),    REG_CIRC + REG_RO   },
    { BRDATA (CURFLAG,      current_flag,   10, 32, NUM_OF_DSK),    REG_CIRC + REG_RO   },
    { BRDATA (TRACKS,       tracks,         10, 8,  NUM_OF_DSK),    REG_CIRC            },
    { DRDATA (IN9COUNT,     in9_count, 4),                          REG_RO              },
    { DRDATA (IN9MESSAGE,   in9_message, 4),                        REG_RO              },
    { DRDATA (DIRTY,        dirty, 4),                              REG_RO              },
    { DRDATA (DSKWL,        warnLevelDSK, 32)                                           },
    { BRDATA (WARNLOCK,     warnLock,       10, 32, NUM_OF_DSK),    REG_CIRC + REG_RO   },
    { BRDATA (WARNATTACHED, warnAttached,   10, 32, NUM_OF_DSK),    REG_CIRC + REG_RO   },
    { DRDATA (WARNDSK10,    warnDSK10, 4),                          REG_RO              },
    { DRDATA (WARNDSK11,    warnDSK11, 4),                          REG_RO              },
    { DRDATA (WARNDSK12,    warnDSK12, 4),                          REG_RO              },
    { BRDATA (DISKBUFFER,   dskbuf,         10, 8,  DSK_SECTSIZE),  REG_CIRC + REG_RO   },
    { NULL }

开发者ID:salva，项目名称:my-simh，代码行数:31，代码来源:altairz80_dsk.c

示例19: ORDATA

    };

REG dp_reg[] = {
    { ORDATA (STA, dp_sta, 16) },
    { ORDATA (BUF, dp_buf, 16) },
    { ORDATA (FNC, dp_fnc, 4) },
    { ORDATA (CW1, dp_cw1, 16) },
    { ORDATA (CW2, dp_cw2, 16) },
    { ORDATA (CSUM, dp_csum, 16) },
    { FLDATA (BUSY, dp_sta, 15) },
    { FLDATA (RDY, dp_sta, 14) },
    { FLDATA (EOR, dp_eor, 0) },
    { FLDATA (DEFINT, dp_defint, 0) },
    { FLDATA (INTREQ, dev_int, INT_V_DP) },
    { FLDATA (ENABLE, dev_enb, INT_V_DP) },
    { BRDATA (TBUF, dpxb, 8, 16, DP_TRKLEN) },
    { ORDATA (RPTR, dp_rptr, 11), REG_RO },
    { ORDATA (WPTR, dp_wptr, 11), REG_RO },
    { ORDATA (BCTR, dp_bctr, 15), REG_RO },
    { ORDATA (GAP, dp_gap, 16), REG_RO },
    { DRDATA (STIME, dp_stime, 24), REG_NZ + PV_LEFT },
    { DRDATA (XTIME, dp_xtime, 24), REG_NZ + PV_LEFT },
    { DRDATA (BTIME, dp_btime, 24), REG_NZ + PV_LEFT },
    { FLDATA (CTYPE, dp_ctype, 0), REG_HRO },
    { URDATA (UCYL, dp_unit[0].CYL, 10, 8, 0,
              DP_NUMDRV, PV_LEFT | REG_HRO) },
    { URDATA (UFNC, dp_unit[0].FNC, 8, 7, 0,
              DP_NUMDRV, REG_HRO) },
    { URDATA (CAPAC, dp_unit[0].capac, 10, T_ADDR_W, 0,
              DP_NUMDRV, PV_LEFT | REG_HRO) },
    { ORDATA (OTAS, dp_otas, 2), REG_HRO },

开发者ID:alexchenfeng，项目名称:UNIXV6，代码行数:31，代码来源:h316_dp.c

示例20: mux_scan_next

void mux_scan_next (void);

/* MUX data structures

   mux_dev      MUX device descriptor
   mux_unit     MUX unit descriptor
   mux_reg      MUX register list
   mux_mod      MUX modifiers list
*/

DIB mux_dib = { -1, DEV3_GMUX, 0, NULL, &mux };

UNIT mux_unit = { UDATA (&muxi_svc, UNIT_ATTABLE, 0), MUX_INIT_POLL };

REG mux_reg[] = {
    { BRDATA (STA, mux_sta, 8, 6, MUX_LINES) },
    { BRDATA (RBUF, mux_rbuf, 8, 8, MUX_LINES) },
    { BRDATA (XBUF, mux_xbuf, 8, 8, MUX_LINES) },
    { BRDATA (INT, mux_flags, 8, 1, MUX_SCANMAX) },
    { ORDATA (SCAN, mux_scan, 7) },
    { FLDATA (SLCK, mux_slck, 0) },
    { DRDATA (TPS, mux_tps, 8), REG_NZ + PV_LEFT },
    { NULL }
    };

MTAB mux_mod[] = {
    { MTAB_XTD | MTAB_VDV, 0, "LINES", "LINES",
      &mux_vlines, tmxr_show_lines, (void *) &mux_desc },
    { MTAB_XTD | MTAB_VDV, 1, NULL, "DISCONNECT",
      &tmxr_dscln, NULL, &mux_desc },
    { UNIT_ATT, UNIT_ATT, "summary", NULL,

开发者ID:ProtoSD，项目名称:simh，代码行数:31，代码来源:sds_mux.c

注：本文中的BRDATA函数示例整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ BREAK_TO_DEBUGGER函数代码示例发布时间：2022-05-30

C++ BRCM_WRITE_REG函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19150|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9975|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8317|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8687|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8628|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9644|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8612|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7991|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8642|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7527|2022-11-06

客服电话

电子邮件

C++ BRDATA函数代码示例

示例1: UDATA

示例2: UDATA

示例3: dcs_vlines

示例4: UDATA

示例5: ORDATA

示例6: UDATA

示例7: UDATA

示例8: ORDATA

示例9: UDATA

示例10: UDATA

示例11: GRDATA

示例12: UDATA

示例13: UDATA

示例14: UDATA

示例15: eval_int

示例16: UDATA

示例17: UDATA

示例18: UDATA

示例19: ORDATA

示例20: mux_scan_next

请发表评论

全部评论

上一篇：

下一篇：

krishnaik06/Machine-Learning-in-90-days

armancodv/building-energy-model-matlab:

美元符号为什么是“$”

爸的笔顺,分析爸的笔画,说说爸的部首

FGRibreau/import-tweets-to-mastodon: How

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053