本文整理汇总了C++中BRCM_WRITE_REG函数的典型用法代码示例。如果您正苦于以下问题：C++ BRCM_WRITE_REG函数的具体用法？C++ BRCM_WRITE_REG怎么用？C++ BRCM_WRITE_REG使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了BRCM_WRITE_REG函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: chal_audio_earpath_enable
//============================================================================
//
// Function Name: cVoid chal_audio_earpath_enable(CHAL_HANDLE handle, cUInt16 enable)
//
// Description: Enable or Disable earpiece path
//
// Parameters: handle - audio chal handle.
// enable - true : enable, false : disable.
// Return: None.
//
//============================================================================
cVoid chal_audio_earpath_enable(CHAL_HANDLE handle, cUInt16 enable)
{
cUInt32 base = ((ChalAudioCtrlBlk_t*)handle)->audioh_base;
cUInt32 reg_val;
cUInt32 Channl_Ctrl = 0x00000000;
if(enable == CHAL_AUDIO_ENABLE)
{
Channl_Ctrl |= AUDIOH_DAC_CTL_VOUT_ENABLE_MASK;
}
else
{
Channl_Ctrl &= ~AUDIOH_DAC_CTL_VOUT_ENABLE_MASK;
}
reg_val = BRCM_READ_REG(base, AUDIOH_DAC_CTL);
reg_val &= ~(AUDIOH_DAC_CTL_VOUT_ENABLE_MASK);
reg_val |= Channl_Ctrl;
/* Set the required setting */
BRCM_WRITE_REG(base, AUDIOH_DAC_CTL, reg_val);
return;
}
开发者ID:Ashutos97，项目名称:GT-S5360-opensource-Update-2，代码行数:36，代码来源:chal_vout.c
示例2: chal_audio_vinpath_set_cic_scale
//function parameters changed
void chal_audio_vinpath_set_cic_scale(CHAL_HANDLE handle,
cUInt32 dmic1_coarse_scale,
cUInt32 dmic1_fine_scale,
cUInt32 dmic2_coarse_scale,
cUInt32 dmic2_fine_scale)
{
cUInt32 base = ((ChalAudioCtrlBlk_t*)handle)->audioh_base;
cUInt32 value = 0;
// Read VIN path FIFO status
value = BRCM_READ_REG(base, AUDIOH_VIN_FILTER_CTRL);
value &= ~(AUDIOH_VIN_FILTER_CTRL_DMIC1_CIC_BIT_SEL_MASK|AUDIOH_VIN_FILTER_CTRL_DMIC1_CIC_FINE_SCL_MASK|AUDIOH_VIN_FILTER_CTRL_DMIC2_CIC_BIT_SEL_MASK|AUDIOH_VIN_FILTER_CTRL_DMIC2_CIC_FINE_SCL_MASK);
dmic1_coarse_scale <<= (AUDIOH_VIN_FILTER_CTRL_DMIC1_CIC_BIT_SEL_SHIFT);
dmic1_fine_scale <<= (AUDIOH_VIN_FILTER_CTRL_DMIC1_CIC_FINE_SCL_SHIFT);
dmic2_coarse_scale <<= (AUDIOH_VIN_FILTER_CTRL_DMIC2_CIC_BIT_SEL_SHIFT);
dmic2_fine_scale <<= (AUDIOH_VIN_FILTER_CTRL_DMIC2_CIC_FINE_SCL_SHIFT);
value |= (dmic1_coarse_scale|dmic1_fine_scale|dmic2_coarse_scale|dmic2_fine_scale);
/* Set the required setting */
BRCM_WRITE_REG(base, AUDIOH_VIN_FILTER_CTRL, value);
return;
}
开发者ID:ASAZING，项目名称:Android-Kernel-Gt-s7390l，代码行数:26，代码来源:chal_vin.c
示例3: chal_audio_dac_loopback_enable
/**
*
* Description: Enable or Disable dac loopback
*
* Parameters: handle - audio chal handle.
* enable - true : enable, false : disable.
*
* Return: None.
*
*****************************************************************************/
cVoid chal_audio_dac_loopback_enable(CHAL_HANDLE handle, cUInt16 enable)
{
cUInt32 base = ((ChalAudioCtrlBlk_t*)handle)->audioh_base;
cUInt32 reg_val;
reg_val = BRCM_READ_REG(base, AUDIOH_LOOPBACK_CTRL);
if(enable == CHAL_AUDIO_ENABLE) {
reg_val |= AUDIOH_LOOPBACK_CTRL_ENABLE_DIG_TX_CLK_MASK;
reg_val |= AUDIOH_LOOPBACK_CTRL_DISABLE_ANA_TX_CLK_MASK;
reg_val |= AUDIOH_LOOPBACK_CTRL_DISABLE_ANA_RX_CLK_MASK;
reg_val |= AUDIOH_LOOPBACK_CTRL_DAC_SDM_LOOPBACK_9LEVEL_MASK;
reg_val |= AUDIOH_LOOPBACK_CTRL_DAC_SDM_LOOPBACK_EN_MASK;
reg_val &= ~AUDIOH_LOOPBACK_CTRL_LOOPBACK_EN_MASK;
} else {
reg_val &= ~(AUDIOH_LOOPBACK_CTRL_ENABLE_DIG_TX_CLK_MASK |
AUDIOH_LOOPBACK_CTRL_DISABLE_ANA_TX_CLK_MASK |
AUDIOH_LOOPBACK_CTRL_DISABLE_ANA_RX_CLK_MASK |
AUDIOH_LOOPBACK_CTRL_DAC_SDM_LOOPBACK_9LEVEL_MASK|
AUDIOH_LOOPBACK_CTRL_DAC_SDM_LOOPBACK_EN_MASK);
}
/* Set the required setting */
BRCM_WRITE_REG(base, AUDIOH_LOOPBACK_CTRL, reg_val);
return;
}
开发者ID:emreharbutoglu，项目名称:i9105Sammy，代码行数:36，代码来源:chal_analogtest.c
示例4: chal_audio_api_set_dac_attenuation
void chal_audio_api_set_dac_attenuation(CHAL_HANDLE handle, cUInt32 dac_mask, cUInt16 enable)
{
cUInt32 reg_val;
cUInt32 reg_dac_mask = 0x00000000;
cUInt32 base = ((ChalAudioCtrlBlk_t*)handle)->audioh_base;
/* Enable/Disable the API attenuation for the DAC Paths.*/
if(dac_mask& (CHAL_AUDIO_PATH_HEADSET_LEFT|CHAL_AUDIO_PATH_HEADSET_RIGHT))
{
reg_dac_mask |= AUDIOH_AUDIO_API_STEREO_API_ATT_MASK;
}
if(dac_mask&CHAL_AUDIO_PATH_IHF_LEFT)
{
reg_dac_mask |= AUDIOH_AUDIO_API_IHF_API_ATT_MASK;
}
if(dac_mask&CHAL_AUDIO_PATH_EARPIECE)
{
reg_dac_mask |= AUDIOH_AUDIO_API_VOUT_API_ATT_MASK;
}
reg_val = BRCM_READ_REG(base, AUDIOH_AUDIO_API);
reg_val &= (~reg_dac_mask);
if(enable == CHAL_AUDIO_ENABLE)
{
reg_val |= (reg_dac_mask);
}
/* Set the required setting */
BRCM_WRITE_REG(base, AUDIOH_AUDIO_API, reg_val);
return;
}
开发者ID:emreharbutoglu，项目名称:i9105Sammy，代码行数:34，代码来源:chal_analogtest.c
示例5: chal_audio_vibra_int_enable
//============================================================================
//
// Function Name: cVoid chal_audio_vibra_int_enable(CHAL_HANDLE handle, cUInt16 thr_int_enable, cUInt16 err_int_enable )
//
// Description: Enable or Disable vibra path interrupt
//
// Parameters: handle - audio chal handle.
// int_enable - true : enable interrupt, false : disable interrupt.
// Return: None.
//
//============================================================================
cVoid chal_audio_vibra_int_enable(CHAL_HANDLE handle, cUInt16 thr_int_enable, cUInt16 err_int_enable )
{
cUInt32 base = ((ChalAudioCtrlBlk_t*)handle)->audioh_base;
cUInt32 reg_val;
reg_val = BRCM_READ_REG(base, AUDIOH_AUDIO_INTC);
if(thr_int_enable == CHAL_AUDIO_ENABLE)
{
reg_val |= AUDIOH_AUDIO_INTC_VIBRA_INTEN_MASK;
}
else
{
reg_val &= ~AUDIOH_AUDIO_INTC_VIBRA_INTEN_MASK;
}
if(err_int_enable == CHAL_AUDIO_ENABLE)
{
reg_val |= AUDIOH_AUDIO_INTC_VIBRA_FIFO_ERRINT_EN_MASK;
}
else
{
reg_val &= ~AUDIOH_AUDIO_INTC_VIBRA_FIFO_ERRINT_EN_MASK;
}
/* Set the required setting */
BRCM_WRITE_REG(base, AUDIOH_AUDIO_INTC, reg_val);
return;
}
开发者ID:Ashutos97，项目名称:GT-S5360-opensource-Update-2，代码行数:41，代码来源:chal_vibra.c
示例6: chal_audio_stpath_int_enable
/*============================================================================
*
* Function Name: cVoid chal_audio_stpath_int_enable(CHAL_HANDLE handle,
* cUInt16 thr_int_enable, cUInt16 err_int_enable )
*
* Description: Enable interrupt on voice out path
*
* Parameters: handle : the sidetone feedback pathhandle.
* enable : enable flag
*
* Return: None.
*
*============================================================================*/
cVoid chal_audio_stpath_int_enable(CHAL_HANDLE handle, cUInt16 thr_int_enable,
cUInt16 err_int_enable)
{
cUInt32 base = ((ChalAudioCtrlBlk_t *) handle)->sdt_base;
cUInt32 reg_val;
reg_val = BRCM_READ_REG(base, SDT_SDT_CTRL_3);
if (thr_int_enable == CHAL_AUDIO_ENABLE)
reg_val |= SDT_SDT_CTRL_3_INTR_EN_MASK;
else
reg_val &= ~SDT_SDT_CTRL_3_INTR_EN_MASK;
if (err_int_enable == CHAL_AUDIO_ENABLE)
reg_val |= SDT_SDT_CTRL_3_ERR_INTR_EN_MASK;
else
reg_val &= ~SDT_SDT_CTRL_3_ERR_INTR_EN_MASK;
/* Set the required setting */
BRCM_WRITE_REG(base, SDT_SDT_CTRL_3, reg_val);
return;
}
开发者ID:faizauthar12，项目名称:Hyper_kernel，代码行数:38，代码来源:chal_caph_audioh_sidetone.c
示例7: chal_audio_hspath_sdm_enable_dither
cVoid chal_audio_hspath_sdm_enable_dither(CHAL_HANDLE handle, cUInt16 enable)
{
cUInt32 reg_val;
cUInt32 hs_dither_enable = 0x00000000;
cUInt32 base = ((ChalAudioCtrlBlk_t *) handle)->audioh_base;
if (enable & CHAL_AUDIO_CHANNEL_LEFT) {
hs_dither_enable |=
AUDIOH_SDM_DITHER_CTL_STEREO_DITHER_EN_L_MASK;
}
if (enable & CHAL_AUDIO_CHANNEL_RIGHT) {
hs_dither_enable |=
AUDIOH_SDM_DITHER_CTL_STEREO_DITHER_EN_R_MASK;
}
reg_val = BRCM_READ_REG(base, AUDIOH_SDM_DITHER_CTL);
reg_val &= ~AUDIOH_SDM_DITHER_CTL_STEREO_DITHER_EN_L_MASK;
reg_val &= ~AUDIOH_SDM_DITHER_CTL_STEREO_DITHER_EN_R_MASK;
reg_val |= hs_dither_enable;
BRCM_WRITE_REG(base, AUDIOH_SDM_DITHER_CTL, reg_val);
return;
}
开发者ID:ASAZING，项目名称:Android-Kernel-Gt-s7390l，代码行数:27，代码来源:chal_caph_audioh_hs.c
示例8: chal_audio_nvinpath_set_filter
/*============================================================================*/
void chal_audio_nvinpath_set_filter(CHAL_HANDLE handle, cUInt16 filter)
{
cUInt32 base = ((ChalAudioCtrlBlk_t*)handle)->audioh_base;
cUInt32 reg_val;
reg_val = BRCM_READ_REG(base, AUDIOH_MIN_PHASE);
/*reg_val &= ~(AUDIOH_MIN_PHASE_DMIC3_MIN_PHASE_MASK |
AUDIOH_MIN_PHASE_DMIC4_MIN_PHASE_MASK);*/
if(filter & CHAL_AUDIO_MINIMUM_PHASE_FILTER)
{
reg_val |= AUDIOH_MIN_PHASE_DMIC3_MIN_PHASE_MASK;
}
if(filter & CHAL_AUDIO_MINIMUM_PHASE_FILTER_L)
{
reg_val |= AUDIOH_MIN_PHASE_DMIC4_MIN_PHASE_MASK;
}
/* Set the required setting */
BRCM_WRITE_REG(base, AUDIOH_MIN_PHASE, reg_val);
return;
}
开发者ID:ASAZING，项目名称:Android-Kernel-Gt-s7390l，代码行数:26，代码来源:chal_nvin.c
示例9: chal_audio_nvinpath_select_sidetone
void chal_audio_nvinpath_select_sidetone (CHAL_HANDLE handle, cUInt16 read_sidetone)
{
cUInt32 reg_val;
cUInt32 base = ((ChalAudioCtrlBlk_t*)handle)->audioh_base;
/*Read the current contents*/
reg_val = BRCM_READ_REG(base, AUDIOH_NVIN_FIFO_CTRL);
/* Clear the paths that were enabled before*/
reg_val &= ~AUDIOH_NVIN_FIFO_CTRL_SIDETONE_SEL_L_MASK;
reg_val &= ~AUDIOH_NVIN_FIFO_CTRL_SIDETONE_SEL_R_MASK;
if(read_sidetone&CHAL_AUDIO_CHANNEL_LEFT)
{
/* Enable Left Channel to read side tone data*/
reg_val |= AUDIOH_NVIN_FIFO_CTRL_SIDETONE_SEL_L_MASK;
}
if(read_sidetone&CHAL_AUDIO_CHANNEL_RIGHT)
{
/* Enable Right Channel to read side tone data*/
reg_val |= AUDIOH_NVIN_FIFO_CTRL_SIDETONE_SEL_R_MASK;
}
/* Set the required setting */
BRCM_WRITE_REG(base, AUDIOH_NVIN_FIFO_CTRL, reg_val);
return;
}
开发者ID:ASAZING，项目名称:Android-Kernel-Gt-s7390l，代码行数:29，代码来源:chal_nvin.c
示例10: chal_audio_ihfpath_enable
//============================================================================
cVoid chal_audio_ihfpath_enable(CHAL_HANDLE handle, cUInt16 enable_chan)
{
cUInt32 base = ((ChalAudioCtrlBlk_t*)handle)->audioh_base;
cUInt32 reg_val;
cUInt32 Channl_Ctrl = 0x00000000;
if(enable_chan&CHAL_AUDIO_CHANNEL_LEFT)
{
Channl_Ctrl |= AUDIOH_DAC_CTL_IHF_L_ENABLE_MASK;
}
if(enable_chan&CHAL_AUDIO_CHANNEL_RIGHT)
{
Channl_Ctrl |= AUDIOH_DAC_CTL_IHF_R_ENABLE_MASK;
}
reg_val = BRCM_READ_REG(base, AUDIOH_DAC_CTL);
reg_val &= ~(AUDIOH_DAC_CTL_IHF_L_ENABLE_MASK | AUDIOH_DAC_CTL_IHF_R_ENABLE_MASK);
reg_val |= Channl_Ctrl;
/* Set the required setting */
BRCM_WRITE_REG(base, AUDIOH_DAC_CTL, reg_val);
return;
}
开发者ID:Astinj，项目名称:Kernel_GT-S5830C，代码行数:28，代码来源:chal_ihf.c
示例11: chal_audio_vinpath_clr_fifo
void chal_audio_vinpath_clr_fifo(CHAL_HANDLE handle)
{
cUInt32 reg_val;
cUInt32 base = ((ChalAudioCtrlBlk_t*)handle)->audioh_base;
reg_val = BRCM_READ_REG(base, AUDIOH_VIN_FIFO_CTRL);
reg_val |= AUDIOH_VIN_FIFO_CTRL_VIN_FIFO_CLEAR_MASK;
/* Set the required setting */
BRCM_WRITE_REG(base, AUDIOH_VIN_FIFO_CTRL, reg_val);
reg_val &= ~AUDIOH_VIN_FIFO_CTRL_VIN_FIFO_CLEAR_MASK;
/* Set the required setting */
BRCM_WRITE_REG(base, AUDIOH_VIN_FIFO_CTRL, reg_val);
return;
}
开发者ID:ASAZING，项目名称:Android-Kernel-Gt-s7390l，代码行数:16，代码来源:chal_vin.c
示例12: chal_audio_int_clear
void chal_audio_int_clear(CHAL_HANDLE handle, cUInt32 reg_val)
{
cUInt32 base = ((ChalAudioCtrlBlk_t*)handle)->audioh_base;
/* Set the required setting */
BRCM_WRITE_REG(base, AUDIOH_AUDIO_INT_STATUS, reg_val);
}
开发者ID:TheNikiz，项目名称:android_kernel_samsung_hawaii，代码行数:7，代码来源:chal_audio.c
示例13: chal_audio_ihfpath_sdm_enable_dither_gain
cVoid chal_audio_ihfpath_sdm_enable_dither_gain(CHAL_HANDLE handle,
cUInt16 gain_enable)
{
cUInt32 reg_val;
cUInt32 hs_dither_gain = 0x00000000;
cUInt32 base = ((ChalAudioCtrlBlk_t*)handle)->audioh_base;
if(gain_enable&CHAL_AUDIO_CHANNEL_LEFT)
{
hs_dither_gain |= AUDIOH_SDM_DITHER_CTL_IHF_DITHER_NOISE_GAIN_L_MASK;
}
if(gain_enable&CHAL_AUDIO_CHANNEL_RIGHT)
{
hs_dither_gain |= AUDIOH_SDM_DITHER_CTL_IHF_DITHER_NOISE_GAIN_R_MASK;
}
reg_val = BRCM_READ_REG(base, AUDIOH_SDM_DITHER_CTL);
reg_val &= ~AUDIOH_SDM_DITHER_CTL_IHF_DITHER_NOISE_GAIN_L_MASK;
reg_val &= ~AUDIOH_SDM_DITHER_CTL_IHF_DITHER_NOISE_GAIN_R_MASK;
reg_val |= hs_dither_gain;
BRCM_WRITE_REG(base, AUDIOH_SDM_DITHER_CTL, reg_val);
return;
}
开发者ID:Astinj，项目名称:Kernel_GT-S5830C，代码行数:28，代码来源:chal_ihf.c
示例14: chal_caph_switch_disable_clock
/****************************************************************************
*
* Function Name: void chal_caph_switch_disable_clock(CHAL_HANDLE handle)
*
* Description: CAPH ASW disable clock
* - set M0_RATIO=0
* - wait a 3 CK26MHz clocks (CK96KHZ_en should never go high again)
* - set SSASW_NOC_EN=0
* - could also set M0_RATIO value here
****************************************************************************/
void chal_caph_switch_disable_clock(CHAL_HANDLE handle)
{
cUInt32 base = ((chal_caph_switch_cb_t*)handle)->base;
cUInt32 reg_val, loop;
reg_val = BRCM_READ_REG(base, CPH_SSASW_SSASW_MN0_DIVIDER);
reg_val &= ~CPH_SSASW_SSASW_MN0_DIVIDER_M0_RATIO_MASK;
BRCM_WRITE_REG(base, CPH_SSASW_SSASW_MN0_DIVIDER, reg_val);
for (loop = 5; loop != 0; loop--)
reg_val = BRCM_READ_REG( base, CPH_SSASW_SSASW_NOC);
reg_val = BRCM_READ_REG(base, CPH_SSASW_SSASW_NOC);
reg_val &= ~(CPH_SSASW_SSASW_NOC_SSASW_NOC_EN_MASK);
BRCM_WRITE_REG( base, CPH_SSASW_SSASW_NOC,reg_val);
return;
}
开发者ID:ASAZING，项目名称:Android-Kernel-Gt-s7390l，代码行数:26，代码来源:chal_caph_switch.c
示例15: chal_audio_hspath_sdm_set_dither_strength
cVoid chal_audio_hspath_sdm_set_dither_strength(CHAL_HANDLE handle,
cUInt16 dither_streng_L,
cUInt16 dither_streng_R)
{
cUInt32 reg_val;
cUInt32 hs_dither_strngth = 0x00000000;
cUInt32 base = ((ChalAudioCtrlBlk_t *) handle)->audioh_base;
hs_dither_strngth |=
(dither_streng_L & (CHAL_AUDIO_DITHER_STRENGTH_MASK)) <<
AUDIOH_SDM_DITHER_CTL_STEREO_DITHER_STRENGTH_L_SHIFT;
hs_dither_strngth |=
(dither_streng_R & (CHAL_AUDIO_DITHER_STRENGTH_MASK)) <<
AUDIOH_SDM_DITHER_CTL_STEREO_DITHER_STRENGTH_R_SHIFT;
reg_val = BRCM_READ_REG(base, AUDIOH_SDM_DITHER_CTL);
reg_val &= ~(AUDIOH_SDM_DITHER_CTL_STEREO_DITHER_STRENGTH_L_MASK);
reg_val &= ~(AUDIOH_SDM_DITHER_CTL_STEREO_DITHER_STRENGTH_R_MASK);
reg_val |= hs_dither_strngth;
BRCM_WRITE_REG(base, AUDIOH_SDM_DITHER_CTL, reg_val);
return;
}
开发者ID:ASAZING，项目名称:Android-Kernel-Gt-s7390l，代码行数:25，代码来源:chal_caph_audioh_hs.c
示例16: chal_audio_ihfpath_sdm_enable_dither
void chal_audio_ihfpath_sdm_enable_dither(CHAL_HANDLE handle,
uint16_t enable)
{
uint32_t reg_val;
uint32_t hs_dither_enable = 0x00000000;
uint32_t base = ((ChalAudioCtrlBlk_t*)handle)->audioh_base;
if(enable&CHAL_AUDIO_CHANNEL_LEFT)
{
hs_dither_enable |= AUDIOH_SDM_DITHER_CTL_IHF_DITHER_EN_L_MASK;
}
if(enable&CHAL_AUDIO_CHANNEL_RIGHT)
{
hs_dither_enable |= AUDIOH_SDM_DITHER_CTL_IHF_DITHER_EN_R_MASK;
}
reg_val = BRCM_READ_REG( base, AUDIOH_SDM_DITHER_CTL);
reg_val &= ~AUDIOH_SDM_DITHER_CTL_IHF_DITHER_EN_L_MASK;
reg_val &= ~AUDIOH_SDM_DITHER_CTL_IHF_DITHER_EN_R_MASK;
reg_val |= hs_dither_enable;
BRCM_WRITE_REG( base, AUDIOH_SDM_DITHER_CTL, reg_val);
return;
}
开发者ID:CVlaspoel，项目名称:VSMC-i9105p，代码行数:29，代码来源:chal_ihf.c
示例17: chal_audio_stpath_clr_fifo
cVoid chal_audio_stpath_clr_fifo(CHAL_HANDLE handle)
{
cUInt32 reg_val;
cUInt32 base = ((ChalAudioCtrlBlk_t *) handle)->sdt_base;
reg_val = BRCM_READ_REG(base, SDT_SDT_CTRL_3);
reg_val |= SDT_SDT_CTRL_3_FIFO_RESET_MASK;
/* Set the required setting */
BRCM_WRITE_REG(base, SDT_SDT_CTRL_3, reg_val);
reg_val &= ~SDT_SDT_CTRL_3_FIFO_RESET_MASK;
/* Set the required setting */
BRCM_WRITE_REG(base, SDT_SDT_CTRL_3, reg_val);
return;
}
开发者ID:faizauthar12，项目名称:Hyper_kernel，代码行数:16，代码来源:chal_caph_audioh_sidetone.c
示例18: chal_audio_ihfpath_int_enable
void chal_audio_ihfpath_int_enable(CHAL_HANDLE handle, uint16_t thr_int_enable, uint16_t err_int_enable )
{
uint32_t base = ((ChalAudioCtrlBlk_t*)handle)->audioh_base;
uint32_t reg_val;
reg_val = BRCM_READ_REG(base, AUDIOH_AUDIO_INTC);
if(thr_int_enable == CHAL_AUDIO_ENABLE)
{
reg_val |= AUDIOH_AUDIO_INTC_IHF_INTEN_MASK;
}
else
{
reg_val &= ~AUDIOH_AUDIO_INTC_IHF_INTEN_MASK;
}
if(err_int_enable == CHAL_AUDIO_ENABLE)
{
reg_val |= AUDIOH_AUDIO_INTC_IHF_FIFO_ERRINT_EN_MASK;
}
else
{
reg_val &= ~AUDIOH_AUDIO_INTC_IHF_FIFO_ERRINT_EN_MASK;
}
/* Set the required setting */
BRCM_WRITE_REG(base, AUDIOH_AUDIO_INTC, reg_val);
return;
}
开发者ID:CVlaspoel，项目名称:VSMC-i9105p，代码行数:30，代码来源:chal_ihf.c
示例19: chal_audio_earpath_sdm_set_coef
cVoid chal_audio_earpath_sdm_set_coef(CHAL_HANDLE handle, cUInt32 *SDM_coef )
{
cUInt32 base = ((ChalAudioCtrlBlk_t*)handle)->audioh_base;
BRCM_WRITE_REG(base, AUDIOH_VOUT_SDM_COEF, *SDM_coef);
return;
}
开发者ID:Ashutos97，项目名称:GT-S5360-opensource-Update-2，代码行数:8，代码来源:chal_vout.c
示例20: chal_audio_earpath_sdm_set_dither_seed
cVoid chal_audio_earpath_sdm_set_dither_seed(CHAL_HANDLE handle, cUInt32 vout_dither_seed)
{
cUInt32 base = ((ChalAudioCtrlBlk_t*)handle)->audioh_base;
BRCM_WRITE_REG(base, AUDIOH_VOUT_DITHER_SEED, vout_dither_seed);
return;
}
开发者ID:Ashutos97，项目名称:GT-S5360-opensource-Update-2，代码行数:8，代码来源:chal_vout.c
注：本文中的BRCM_WRITE_REG函数示例整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。 |
客服电话
APP下载
官方微信
请发表评论