本文整理汇总了C++中BBL_Next函数的典型用法代码示例。如果您正苦于以下问题：C++ BBL_Next函数的具体用法？C++ BBL_Next怎么用？C++ BBL_Next使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了BBL_Next函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: Trace
VOID Trace(TRACE trace, VOID *v)
{
for (BBL bbl = TRACE_BblHead(trace); BBL_Valid(bbl); bbl = BBL_Next(bbl))
{
BBL_InsertCall(bbl, IPOINT_ANYWHERE, (AFUNPTR)LogBBL, IARG_FAST_ANALYSIS_CALL, IARG_ADDRINT, BBL_Address(bbl), IARG_END);
}
}
开发者ID:sashs，项目名称:tools，代码行数:7，代码来源:bbltool.cpp
示例2: Trace
VOID Trace (TRACE trace, VOID *v)
{
for (BBL bbl = TRACE_BblHead(trace); BBL_Valid(bbl); bbl = BBL_Next(bbl))
{
for (INS ins = BBL_InsHead(bbl); INS_Valid(ins); ins = INS_Next(ins))
{
xed_iclass_enum_t iclass1 = static_cast<xed_iclass_enum_t>(INS_Opcode(ins));
if (iclass1 == XED_ICLASS_FLD1 && INS_Valid(INS_Next(ins)))
{
xed_iclass_enum_t iclass2 = static_cast<xed_iclass_enum_t>(INS_Opcode(INS_Next(ins)));
if (iclass2 == XED_ICLASS_FLD1 && INS_Valid(INS_Next(INS_Next(ins))))
{
xed_iclass_enum_t iclass3 = static_cast<xed_iclass_enum_t>(INS_Opcode(INS_Next(INS_Next(ins))));
if (iclass3 == XED_ICLASS_FLD1)
{
printf ("found fld1 sequence at %x\n", INS_Address(INS_Next(INS_Next(ins))));
{
INS_InsertCall(INS_Next(INS_Next(ins)), IPOINT_AFTER, AFUNPTR(CallToFldzToTop3), IARG_END);
printf ("Inserted call1 to FldzToTop3 after instruction at %x\n", INS_Address(INS_Next(INS_Next(ins))));
}
}
}
}
}
}
}
开发者ID:alagenchev，项目名称:school_code，代码行数:28，代码来源:x87_regs_in_context.cpp
示例3: Trace
VOID Trace (TRACE trace, VOID *v)
{
for (BBL bbl = TRACE_BblHead(trace); BBL_Valid(bbl); bbl = BBL_Next(bbl))
{
for (INS ins = BBL_InsHead(bbl); INS_Valid(ins); ins = INS_Next(ins))
{
xed_iclass_enum_t iclass1 = static_cast<xed_iclass_enum_t>(INS_Opcode(ins));
if (iclass1 == XED_ICLASS_FLD1 && INS_Valid(INS_Next(ins)))
{
xed_iclass_enum_t iclass2 = static_cast<xed_iclass_enum_t>(INS_Opcode(INS_Next(ins)));
if (iclass2 == XED_ICLASS_FLD1 && INS_Valid(INS_Next(INS_Next(ins))))
{
xed_iclass_enum_t iclass3 = static_cast<xed_iclass_enum_t>(INS_Opcode(INS_Next(INS_Next(ins))));
if (iclass3 == XED_ICLASS_FLD1)
{
printf ("tool: found fld1 sequence at %p\n", (void *)INS_Address(INS_Next(INS_Next(ins))));
fflush (stdout);
// Insert an analysis call that will cause the xmm scratch registers to be spilled
INS_InsertCall(INS_Next(INS_Next(ins)), IPOINT_AFTER, (AFUNPTR)SetXmmScratchesFun, IARG_END);
return;
}
}
}
}
}
}
开发者ID:alagenchev，项目名称:school_code，代码行数:26，代码来源:set_fp_context_ymm_regs_xmms_spilled.cpp
示例4: trace_instrumentation
// We have to instrument traces in order to instrument each BBL, the API doesn't have a BBL_AddInstrumentFunction
VOID trace_instrumentation(TRACE trace, VOID *v)
{
// We don't want to instrument the BBL contained in the Windows API
if(is_address_in_blacklisted_modules(TRACE_Address(trace)))
return;
for(BBL bbl = TRACE_BblHead(trace); BBL_Valid(bbl); bbl = BBL_Next(bbl))
{
// What's going on under the hood
// LOG("[INSTRU] BBL Address: " + hexstr(BBL_Address(bbl)) + ", " + hexstr(BBL_NumIns(bbl)) + "\n");
// Insert a call to handle_basic_block before every basic block, passing the number of instructions
BBL_InsertCall(
bbl,
IPOINT_ANYWHERE,
(AFUNPTR)handle_basic_block,
IARG_FAST_ANALYSIS_CALL, // Use a faster linkage for calls to analysis functions. Add PIN_FAST_ANALYSIS_CALL to the declaration between the return type and the function name. You must also add IARG_FAST_ANALYSIS_CALL to the InsertCall. For example:
IARG_UINT32,
BBL_NumIns(bbl),
IARG_ADDRINT,
BBL_Address(bbl),
IARG_END
);
}
}
开发者ID:0vercl0k，项目名称:stuffz，代码行数:29，代码来源:pin-code-coverage-measure.cpp
示例5: Trace
VOID Trace(TRACE trace, VOID *v)
{
for (BBL bbl = TRACE_BblHead(trace); BBL_Valid(bbl); bbl = BBL_Next(bbl))
{
INS tail = BBL_InsTail(bbl);
if( INS_IsCall(tail) )
{
INS_InsertCall(tail, IPOINT_BEFORE, AFUNPTR(do_call_indirect),
IARG_BRANCH_TARGET_ADDR, IARG_BRANCH_TAKEN, IARG_END);
}
else
{
// sometimes code is not in an image
RTN rtn = TRACE_Rtn(trace);
// also track stup jumps into share libraries
if( RTN_Valid(rtn) && !INS_IsDirectBranchOrCall(tail) && ".plt" == SEC_Name( RTN_Sec( rtn ) ))
{
INS_InsertCall(tail, IPOINT_BEFORE, AFUNPTR(do_call_indirect),
IARG_BRANCH_TARGET_ADDR, IARG_BRANCH_TAKEN, IARG_END);
}
}
}
}
开发者ID:andrewjinyounglee，项目名称:PerVERT，代码行数:27，代码来源:toprtn.cpp
示例6: Trace
VOID Trace (TRACE trace, VOID *v)
{
for (BBL bbl = TRACE_BblHead(trace); BBL_Valid(bbl); bbl = BBL_Next(bbl))
{
for (INS ins = BBL_InsHead(bbl); INS_Valid(ins); ins = INS_Next(ins))
{
xed_iclass_enum_t iclass1 = static_cast<xed_iclass_enum_t>(INS_Opcode(ins));
if (iclass1 == XED_ICLASS_FLD1 && INS_Valid(INS_Next(ins)))
{
xed_iclass_enum_t iclass2 = static_cast<xed_iclass_enum_t>(INS_Opcode(INS_Next(ins)));
if (iclass2 == XED_ICLASS_FLD1 && INS_Valid(INS_Next(INS_Next(ins))))
{
xed_iclass_enum_t iclass3 = static_cast<xed_iclass_enum_t>(INS_Opcode(INS_Next(INS_Next(ins))));
if (iclass3 == XED_ICLASS_FLD1)
{
printf ("found fld1 sequence at %lx\n", (unsigned long)(INS_Address(INS_Next(INS_Next(ins)))));
if (testNum == 0)
{
INS_InsertCall(INS_Next(INS_Next(ins)), IPOINT_AFTER, AFUNPTR(CallToUnMaskZeroDivideInMxcsr), IARG_END);
printf ("Inserted call1 to UnMaskZeroDivideInMxcsr after instruction at %lx\n",
(unsigned long)(INS_Address(INS_Next(INS_Next(ins)))));
testNum++;
}
return;
}
}
}
}
}
}
开发者ID:herjmoo，项目名称:research，代码行数:30，代码来源:test_iarg_preserve_mxcsr.cpp
示例7: TRACE_Address
VOID PolymorphicCodeHandlerModule::inspectTrace(TRACE trace){
// set the range of address in which the current trace resides
this->trace_head = TRACE_Address(trace);
this->trace_tail = trace_head + TRACE_Size(trace);
for (BBL bbl = TRACE_BblHead(trace); BBL_Valid(bbl); bbl = BBL_Next(bbl))
{
for (INS ins = BBL_InsHead(bbl); INS_Valid(ins); ins = INS_Next(ins))
{
// for ech instruction we have to check if it has been overwritten by a previous instruction of the current trace (polimiorfic code detection)
INS_InsertCall(ins, IPOINT_BEFORE, AFUNPTR(checkIfWrittenAddress),
IARG_INST_PTR,
IARG_CONTEXT,
IARG_UINT32, INS_Size(ins),
IARG_PTR, this,
IARG_END);
for (UINT32 op = 0; op<INS_MemoryOperandCount(ins); op++) {
if(INS_MemoryOperandIsWritten(ins,op)){
// for each write operation we have to check if the traget address is inside the current trace (attempt to write polimorfic code)
INS_InsertCall(ins, IPOINT_BEFORE, AFUNPTR(polimorficCodeHandler),
IARG_INST_PTR,
IARG_MEMORYOP_EA, op,
IARG_PTR, this,
IARG_END);
}
}
}
}
}
开发者ID:chubbymaggie，项目名称:PINdemonium，代码行数:28，代码来源:PolymorphicCodeHandlerModule.cpp
示例8: Trace
VOID Trace(TRACE trace, VOID *v)
{
for (BBL bbl = TRACE_BblHead(trace); BBL_Valid(bbl); bbl = BBL_Next(bbl))
{
INS_InsertCall(BBL_InsHead(bbl), IPOINT_BEFORE, (AFUNPTR)docount, IARG_UINT32, BBL_NumIns(bbl), IARG_END);
}
}
开发者ID:alugupta，项目名称:resilient-systems，代码行数:7，代码来源:icount2.cpp
示例9: Trace
VOID Trace(TRACE trace, VOID *v)
{
BOOL rewrite = false;
for (BBL bbl = TRACE_BblHead(trace); BBL_Valid(bbl); bbl = BBL_Next(bbl))
{
for (INS ins = BBL_InsHead(bbl); INS_Valid(ins); ins = INS_Next(ins))
{
// If we see an instruction that needs rewriting, then rewrite all
if (SwizzleRefs.find(INS_Address(ins)) != SwizzleRefs.end())
rewrite = true;
if (rewrite)
{
// If we suspect this instruction needs to be swizzled, generate safe, but slow code
RewriteIns(ins);
}
else
{
// Generate code to check if swizzling is needed, but not do it
CheckIns(ins, TRACE_Address(trace));
}
}
}
}
开发者ID:telnetgmike，项目名称:arm-v7a-pintool，代码行数:25，代码来源:swizzle3.C
示例10: Trace
// Pin calls this function every time a new basic block is encountered
// It inserts a call to docount
VOID Trace(TRACE trace, VOID *v)
{
// Visit every basic block in the trace
for (BBL bbl = TRACE_BblHead(trace); BBL_Valid(bbl); bbl = BBL_Next(bbl))
{
for (INS ins = BBL_InsHead(bbl); INS_Valid(ins); ins = INS_Next(ins))
{
if (INS_IsMemoryRead(ins))
{
INS_InsertIfCall(ins, IPOINT_BEFORE, (AFUNPTR)ReadAlways, IARG_MEMORYREAD_EA, IARG_END);
INS_InsertThenCall(ins, IPOINT_BEFORE, (AFUNPTR)ReadRare, IARG_MEMORYREAD_EA, IARG_END);
}
}
// Always()->Rare() are partially inlined
BBL_InsertIfCall(bbl, IPOINT_BEFORE, (AFUNPTR)Always, IARG_END);
BBL_InsertThenCall(bbl, IPOINT_BEFORE, (AFUNPTR)Rare, IARG_END);
// Always()->Rare() are partially inlined
BBL_InsertIfCall(bbl, IPOINT_BEFORE, (AFUNPTR)AlwaysNoinline, IARG_END);
BBL_InsertThenCall(bbl, IPOINT_BEFORE, (AFUNPTR)RareNoinline, IARG_END);
// Noinline() is not inlined
BBL_InsertCall(bbl, IPOINT_BEFORE, (AFUNPTR)Noinline, IARG_END);
}
}
开发者ID:EmilyBragg，项目名称:profiling-tool，代码行数:28，代码来源:partialinline.cpp
示例11: Trace
VOID Trace(TRACE trace, VOID *)
{
if (!EnableInstrumentation)
return;
for (BBL bbl = TRACE_BblHead(trace); BBL_Valid(bbl); bbl = BBL_Next(bbl))
BBL_InsertCall(bbl, IPOINT_BEFORE, AFUNPTR(CheckPC), IARG_INST_PTR, IARG_END);
}
开发者ID:alugupta，项目名称:resilient-systems，代码行数:8，代码来源:sigenable.cpp
示例12: Trace
// Pin calls this function every time a new instruction is encountered
void Trace(TRACE trace , void *v)
{
for(BBL bbl= TRACE_BblHead(trace); BBL_Valid(bbl); bbl = BBL_Next(bbl)){
for( INS ins = BBL_InsHead(bbl); INS_Valid(ins) ; ins =INS_Next(ins)){
oepf.IsCurrentInOEP(ins);
}
}
}
开发者ID:fonstest，项目名称:PINTOOLS，代码行数:9，代码来源:MyPinTool.cpp
示例13: Trace
static VOID Trace(TRACE trace, VOID *v)
{
RTN rtn = TRACE_Rtn(trace);
ADDRINT version = TRACE_Version(trace);
// If we are not in watch_rtn, switch back to base version
if (!RTN_Valid(rtn) || RTN_Name(rtn) != watch_rtn)
{
if (version != VERSION_BASE)
BBL_SetTargetVersion(TRACE_BblHead(trace), VERSION_BASE);
return;
}
if (TRACE_Address(trace) == RTN_Address(rtn)) {
INS ins = BBL_InsHead(TRACE_BblHead(trace));
if (version == VERSION_BASE)
{
// version_reg is used to select the version, use the first
// argument of watch_rtn to set it
INS_InsertCall(ins, IPOINT_BEFORE, AFUNPTR(select_version),
IARG_FUNCARG_ENTRYPOINT_VALUE, 0,
IARG_RETURN_REGS, version_reg,
IARG_END);
// IF we are in the base version, decide if we should go to the
// other versions
// Note that the version instrumentation will occur before any
// following instrumentation done on this ins
INS_InsertVersionCase(ins, version_reg, 10, VERSION_1, IARG_END);
INS_InsertVersionCase(ins, version_reg, 20, VERSION_2, IARG_END);
printf ("Instrumentation at %p\n", reinterpret_cast<void *>(INS_Address(ins)));
}
}
INS ins = BBL_InsHead(TRACE_BblHead(trace));
for (BBL bbl = TRACE_BblHead(trace); BBL_Valid(bbl); bbl = BBL_Next(bbl))
{
// Instrumentation depends on version
// These instrumentations occur after the preceeding version instrumentation
// (i.e. the instrumentation inserted by the above INS_InsertVersionCase calls
switch(version) {
case VERSION_BASE:
INS_InsertCall(ins, IPOINT_BEFORE, AFUNPTR(Emit),
IARG_PTR, "version base", IARG_END);
break;
case VERSION_1:
INS_InsertCall(ins, IPOINT_BEFORE, AFUNPTR(Emit),
IARG_PTR, "version 1", IARG_END);
break;
case VERSION_2:
INS_InsertCall(ins, IPOINT_BEFORE, AFUNPTR(Emit),
IARG_PTR, "version 2", IARG_END);
break;
default:
assert(0);
break;
}
}
}
开发者ID:EmilyBragg，项目名称:profiling-tool，代码行数:58，代码来源:special_case1.cpp
示例14: Trace
VOID Trace(TRACE trace, VOID *v)
{
for (BBL bbl = TRACE_BblTail(trace); BBL_Valid(bbl); bbl = BBL_Next(bbl)) {
if (BBL_HasFallThrough(bbl)) {
INS ins = BBL_InsTail(bbl);
TEST(INS_HasFallThrough(ins), "BBL_HasFallThrough or INS_HasFallThrough failed");
}
}
}
开发者ID:alagenchev，项目名称:school_code，代码行数:9，代码来源:bblFallThrough.cpp
示例15: instrument_trace
static void instrument_trace(TRACE trace, VOID *v)
{
sse_aligner_t* pthis = static_cast<sse_aligner_t*>(v);
bool is_read = false;
for (BBL bbl = TRACE_BblHead(trace); BBL_Valid(bbl); bbl = BBL_Next(bbl))
for (INS ins = BBL_InsHead(bbl); INS_Valid(ins); ins = INS_Next(ins))
if (check_for_sse_memop(ins, is_read, pthis))
rewrite_instruction(ins, is_read, pthis);
}
开发者ID:alugupta，项目名称:resilient-systems，代码行数:9，代码来源:sse-unaligned-class.cpp
示例16: Trace
/*!
* Insert call to the CountBbl() analysis routine before every basic block
* of the trace.
* This function is called every time a new trace is encountered.
* @param[in] trace trace to be instrumented
* @param[in] v value specified by the tool in the TRACE_AddInstrumentFunction
* function call
*/
VOID Trace(TRACE trace, VOID *v)
{
// Visit every basic block in the trace
for (BBL bbl = TRACE_BblHead(trace); BBL_Valid(bbl); bbl = BBL_Next(bbl))
{
// Insert a call to CountBbl() before every basic bloc, passing the number of instructions
BBL_InsertCall(bbl, IPOINT_BEFORE, (AFUNPTR)CountBbl, IARG_UINT32, BBL_NumIns(bbl), IARG_END);
}
}
开发者ID:BIT-SYS，项目名称:sfp，代码行数:17，代码来源:MyPinTool.cpp
示例17: TraceInserted
VOID TraceInserted(TRACE trace, VOID *)
{
for (BBL bbl = TRACE_BblHead(trace); BBL_Valid(bbl); bbl = BBL_Next(bbl))
{
for (INS ins = BBL_InsHead(bbl); INS_Valid(ins); ins = INS_Next(ins))
{
cacheInstructions++;
}
}
}
开发者ID:aarony，项目名称:arm-v7a-pintool，代码行数:10，代码来源:ccfp.C
示例18: Trace
void Trace(TRACE trace, void *v)
{
// for each bbl in the application trace...
for (BBL bbl = TRACE_BblHead(trace); BBL_Valid(bbl); bbl = BBL_Next(bbl))
{
// args: bbl=bbl, IPOINT_BEFORE=insert before bbl, checkBBL=ptr to function to insert,
// IARG_PTR=function argument type, BBL_Address(bbl)=function argument, IARG_END=end of arguement marker
BBL_InsertCall(bbl, IPOINT_BEFORE, (AFUNPTR)checkBBL, IARG_PTR, BBL_Address(bbl), IARG_END);
}
}
开发者ID:anthonykasza，项目名称:windows-snippets，代码行数:10，代码来源:memdump.cpp
示例19: Trace
VOID Trace(TRACE trace, VOID *v)
{
for (BBL bbl = TRACE_BblHead(trace); BBL_Valid(bbl); bbl = BBL_Next(bbl))
BBL_InsertCall(bbl, IPOINT_ANYWHERE, AFUNPTR(Count),
IARG_FAST_ANALYSIS_CALL,
IARG_THREAD_ID,
IARG_UINT32, BBL_NumIns(bbl),
IARG_END);
}
开发者ID:llubu，项目名称:ROP，代码行数:10，代码来源:finalTool.cpp
示例20: Trace
VOID Trace(TRACE trace, VOID *v)
{
for (BBL bbl = TRACE_BblHead(trace); BBL_Valid(bbl); bbl = BBL_Next(bbl))
{
for (INS ins = BBL_InsHead(bbl); INS_Valid(ins); ins = INS_Next(ins))
{
RewriteIns(ins);
}
}
}
开发者ID:gungun1010，项目名称:hidden，代码行数:10，代码来源:rewritememop.cpp
注：本文中的BBL_Next函数示例整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。 |
客服电话
APP下载
官方微信
请发表评论