C++ BBL_InsHead函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中BBL_InsHead函数的典型用法代码示例。如果您正苦于以下问题：C++ BBL_InsHead函数的具体用法？C++ BBL_InsHead怎么用？C++ BBL_InsHead使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了BBL_InsHead函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: Trace

static VOID Trace(TRACE trace, VOID *v)
{
    RTN rtn = TRACE_Rtn(trace);
    
    ADDRINT version = TRACE_Version(trace);
    // If we are not in watch_rtn, switch back to base version
    if (!RTN_Valid(rtn) || RTN_Name(rtn) != watch_rtn)
    {
        if (version != VERSION_BASE)
            BBL_SetTargetVersion(TRACE_BblHead(trace), VERSION_BASE);
        return;
    }

    if (TRACE_Address(trace) == RTN_Address(rtn)) {
        INS ins = BBL_InsHead(TRACE_BblHead(trace));
        if (version == VERSION_BASE) 
        {
            // version_reg is used to select the version, use the first
            // argument of watch_rtn to set it
            INS_InsertCall(ins, IPOINT_BEFORE, AFUNPTR(select_version),
                           IARG_FUNCARG_ENTRYPOINT_VALUE, 0,
                           IARG_RETURN_REGS, version_reg,
                           IARG_END);
            // IF we are in the base version, decide if we should go to the
            // other versions
            // Note that the version instrumentation will occur before any
            // following instrumentation done on this ins
            INS_InsertVersionCase(ins, version_reg, 10, VERSION_1, IARG_END);
            INS_InsertVersionCase(ins, version_reg, 20, VERSION_2, IARG_END);
            printf ("Instrumentation at %p\n", reinterpret_cast<void *>(INS_Address(ins)));
        }
    }

    INS ins = BBL_InsHead(TRACE_BblHead(trace));
    for (BBL bbl = TRACE_BblHead(trace); BBL_Valid(bbl); bbl = BBL_Next(bbl)) 
    {
        // Instrumentation depends on version
        // These instrumentations occur after the preceeding version instrumentation
        // (i.e. the instrumentation inserted by the above INS_InsertVersionCase calls
        switch(version) {
          case VERSION_BASE:
            INS_InsertCall(ins, IPOINT_BEFORE, AFUNPTR(Emit),
                             IARG_PTR, "version base", IARG_END);
            break;
          case VERSION_1:
            INS_InsertCall(ins, IPOINT_BEFORE, AFUNPTR(Emit),
                             IARG_PTR, "version 1", IARG_END);
            break;
          case VERSION_2:
            INS_InsertCall(ins, IPOINT_BEFORE, AFUNPTR(Emit),
                             IARG_PTR, "version 2", IARG_END);
            break;
          default:
            assert(0);
            break;
        }
    }
}

开发者ID:EmilyBragg，项目名称:profiling-tool，代码行数:58，代码来源:special_case1.cpp

示例2: Trace

VOID Trace(TRACE trace, VOID *v)
{
    static BOOL programStart = TRUE;

    if (programStart)
    {
        programStart = FALSE;
        next_pc = (void*)INS_Address(BBL_InsHead(TRACE_BblHead(trace)));
    }

    for (BBL bbl = TRACE_BblHead(trace); BBL_Valid(bbl); bbl = BBL_Next(bbl))
    {
        // check BBL entry PC
        INS_InsertCall(
            BBL_InsHead(bbl), IPOINT_BEFORE, (AFUNPTR)CheckPc,
            IARG_INST_PTR,
            IARG_END);

        INS tail = BBL_InsTail(bbl);
        
        if (INS_IsBranchOrCall(tail))
        {
            // record taken branch targets
            INS_InsertCall(
                tail, IPOINT_BEFORE, AFUNPTR(RecordPc),
                IARG_INST_PTR,
                IARG_BRANCH_TARGET_ADDR,
                IARG_BRANCH_TAKEN,
                IARG_END);
        }

        if (INS_HasFallThrough(tail))
        {
            // record fall-through
            INS_InsertCall(
                tail, IPOINT_AFTER, (AFUNPTR)RecordPc,
                IARG_INST_PTR,
                IARG_FALLTHROUGH_ADDR,
                IARG_BOOL,
                TRUE,
                IARG_END);
        }

#if defined(TARGET_IA32) || defined(TARGET_IA32E)
        if (INS_IsSysenter(tail) ||
            INS_HasRealRep(tail))
        { // sysenter on x86 has some funny control flow that we can't correctly verify for now
            // Genuinely REP prefixed instructions are also odd, they appear to stutter.
            INS_InsertCall(tail, IPOINT_BEFORE, (AFUNPTR)Skip, IARG_END);
        }
#endif
    }
}

开发者ID:FengXingYuXin，项目名称:SHMA，代码行数:53，代码来源:cflowcheck.cpp

示例3: Trace

VOID Trace (TRACE trace, VOID *v)
{
    for (BBL bbl = TRACE_BblHead(trace); BBL_Valid(bbl); bbl = BBL_Next(bbl))
    {
        for (INS ins = BBL_InsHead(bbl); INS_Valid(ins); ins = INS_Next(ins))
        {
            xed_iclass_enum_t iclass1 = static_cast<xed_iclass_enum_t>(INS_Opcode(ins));
            if (iclass1 == XED_ICLASS_FLD1 && INS_Valid(INS_Next(ins)))
            {
                xed_iclass_enum_t iclass2 = static_cast<xed_iclass_enum_t>(INS_Opcode(INS_Next(ins)));
                if (iclass2 == XED_ICLASS_FLD1 && INS_Valid(INS_Next(INS_Next(ins))))
                {
                    xed_iclass_enum_t iclass3 = static_cast<xed_iclass_enum_t>(INS_Opcode(INS_Next(INS_Next(ins))));
                    if (iclass3 == XED_ICLASS_FLD1)
                    {
                        printf ("tool: found fld1 sequence at %p\n", (void *)INS_Address(INS_Next(INS_Next(ins))));
                        fflush (stdout);
                        // Insert an analysis call that will cause the xmm scratch registers to be spilled
                        INS_InsertCall(INS_Next(INS_Next(ins)), IPOINT_AFTER, (AFUNPTR)SetXmmScratchesFun, IARG_END);
                        return;
                    }
                }
            }
        }
    }
}

开发者ID:alagenchev，项目名称:school_code，代码行数:26，代码来源:set_fp_context_ymm_regs_xmms_spilled.cpp

示例4: Trace

VOID Trace (TRACE trace, VOID *v)
{
    for (BBL bbl = TRACE_BblHead(trace); BBL_Valid(bbl); bbl = BBL_Next(bbl))
    {
        for (INS ins = BBL_InsHead(bbl); INS_Valid(ins); ins = INS_Next(ins))
        {
            xed_iclass_enum_t iclass1 = static_cast<xed_iclass_enum_t>(INS_Opcode(ins));
            if (iclass1 == XED_ICLASS_FLD1 && INS_Valid(INS_Next(ins)))
            {
                xed_iclass_enum_t iclass2 = static_cast<xed_iclass_enum_t>(INS_Opcode(INS_Next(ins)));
                if (iclass2 == XED_ICLASS_FLD1 && INS_Valid(INS_Next(INS_Next(ins))))
                {
                    xed_iclass_enum_t iclass3 = static_cast<xed_iclass_enum_t>(INS_Opcode(INS_Next(INS_Next(ins))));
                    if (iclass3 == XED_ICLASS_FLD1)
                    {
                        printf ("found fld1 sequence at %x\n", INS_Address(INS_Next(INS_Next(ins))));
                        
                        {
                            INS_InsertCall(INS_Next(INS_Next(ins)), IPOINT_AFTER, AFUNPTR(CallToFldzToTop3), IARG_END);
                            printf ("Inserted call1 to FldzToTop3 after instruction at %x\n", INS_Address(INS_Next(INS_Next(ins))));
                            
                        }
                    }
                }
            }
        }
    }
}

开发者ID:alagenchev，项目名称:school_code，代码行数:28，代码来源:x87_regs_in_context.cpp

示例5: RecordRegisters

INT32 RecordRegisters(BBL bbl, 
                      UINT16 * stats, 
                      UINT32 max_stats)
{
    UINT32 count = 0;
    
    for (INS ins = BBL_InsHead(bbl); INS_Valid(ins); ins = INS_Next(ins))
    {
        if (count >= max_stats)
        {
            cerr << "Too many stats in this block" << endl;
            exit(1);
        }
        bool rmem = INS_IsMemoryRead(ins) || INS_HasMemoryRead2(ins);
        bool wmem = INS_IsMemoryWrite(ins);
        bool rw_mem = rmem & wmem;
        if (rw_mem)
            stats[count++] = PATTERN_MEM_RW;
        else if (rmem)
            stats[count++] = PATTERN_MEM_R;
        else if (wmem)
            stats[count++] = PATTERN_MEM_W;
        else if (INS_SegmentRegPrefix(ins) != REG_INVALID())
            stats[count++] = PATTERN_NO_MEM_LIES;
        else 
            stats[count++] = PATTERN_NO_MEM;
    }

    stats[count++] = 0;
    
    return count;
}

开发者ID:gungun1010，项目名称:hidden，代码行数:32，代码来源:ldstmix.cpp

示例6: TRACE_Address

VOID PolymorphicCodeHandlerModule::inspectTrace(TRACE trace){
	// set the range of address in which the current trace resides
	this->trace_head = TRACE_Address(trace);
	this->trace_tail = trace_head + TRACE_Size(trace);
	for (BBL bbl = TRACE_BblHead(trace); BBL_Valid(bbl); bbl = BBL_Next(bbl))
    {
        for (INS ins = BBL_InsHead(bbl); INS_Valid(ins); ins = INS_Next(ins))
        {	
			// for ech instruction we have to check if it has been overwritten by a previous instruction of the current trace (polimiorfic code detection)
			INS_InsertCall(ins, IPOINT_BEFORE, AFUNPTR(checkIfWrittenAddress), 
				IARG_INST_PTR, 
				IARG_CONTEXT, 
				IARG_UINT32, INS_Size(ins), 
				IARG_PTR, this,
				IARG_END);				
			for (UINT32 op = 0; op<INS_MemoryOperandCount(ins); op++) {
				if(INS_MemoryOperandIsWritten(ins,op)){	
					// for each write operation we have to check if the traget address is inside the current trace (attempt to write polimorfic code)
					INS_InsertCall(ins, IPOINT_BEFORE, AFUNPTR(polimorficCodeHandler),
						IARG_INST_PTR,
						IARG_MEMORYOP_EA, op,
						IARG_PTR, this,
						IARG_END);		
				}	
			}					
        }
    }
}

开发者ID:chubbymaggie，项目名称:PINdemonium，代码行数:28，代码来源:PolymorphicCodeHandlerModule.cpp

示例7: Trace

VOID Trace (TRACE trace, VOID *v)
{
    for (BBL bbl = TRACE_BblHead(trace); BBL_Valid(bbl); bbl = BBL_Next(bbl))
    {
        for (INS ins = BBL_InsHead(bbl); INS_Valid(ins); ins = INS_Next(ins))
        {
            xed_iclass_enum_t iclass1 = static_cast<xed_iclass_enum_t>(INS_Opcode(ins));
            if (iclass1 == XED_ICLASS_FLD1 && INS_Valid(INS_Next(ins)))
            {
                xed_iclass_enum_t iclass2 = static_cast<xed_iclass_enum_t>(INS_Opcode(INS_Next(ins)));
                if (iclass2 == XED_ICLASS_FLD1 && INS_Valid(INS_Next(INS_Next(ins))))
                {
                    xed_iclass_enum_t iclass3 = static_cast<xed_iclass_enum_t>(INS_Opcode(INS_Next(INS_Next(ins))));
                    if (iclass3 == XED_ICLASS_FLD1)
                    {
                        printf ("found fld1 sequence at %lx\n", (unsigned long)(INS_Address(INS_Next(INS_Next(ins)))));
                        if (testNum == 0)
                        {
                            INS_InsertCall(INS_Next(INS_Next(ins)), IPOINT_AFTER, AFUNPTR(CallToUnMaskZeroDivideInMxcsr), IARG_END);
                            printf ("Inserted call1 to UnMaskZeroDivideInMxcsr after instruction at %lx\n",
                                    (unsigned long)(INS_Address(INS_Next(INS_Next(ins)))));
                            testNum++;
                        }
                        return;
                    }
                }
            }
        }
    }
}

开发者ID:herjmoo，项目名称:research，代码行数:30，代码来源:test_iarg_preserve_mxcsr.cpp

示例8: Trace

VOID Trace(TRACE trace, VOID *v)
{
    for (BBL bbl = TRACE_BblHead(trace); BBL_Valid(bbl); bbl = BBL_Next(bbl))
    {
        INS_InsertCall(BBL_InsHead(bbl), IPOINT_BEFORE, (AFUNPTR)docount, IARG_UINT32, BBL_NumIns(bbl), IARG_END);
    }
}

开发者ID:alugupta，项目名称:resilient-systems，代码行数:7，代码来源:icount2.cpp

示例9: Trace

VOID Trace(TRACE trace, VOID *v)
{
    for (BBL bbl = TRACE_BblHead(trace); BBL_Valid(bbl); bbl = BBL_Next(bbl))
    {
        DBG_PRINT(printf("Inst: Sequence address %p\n",(CHAR*)(INS_Address(BBL_InsHead(bbl)))));
        for (INS ins = BBL_InsHead(bbl); INS_Valid(ins); ins = INS_Next(ins))
        {
            DBG_PRINT(printf("Inst:   %p\n",(CHAR*)(INS_Address(ins))));
            INS_InsertCall(ins, IPOINT_BEFORE, AFUNPTR(docount_ins), IARG_INST_PTR, IARG_END);
        }
        
        INT32 icount = BBL_NumIns(bbl);
        DBG_PRINT(printf("Inst:     -> control flow change (bbl size %d)\n", icount));
        INS_InsertCall(BBL_InsTail(bbl), IPOINT_BEFORE, AFUNPTR(docount_bbl_ins), IARG_INST_PTR, IARG_UINT32, icount, IARG_END);
    }
}

开发者ID:aarony，项目名称:arm-v7a-pintool，代码行数:16，代码来源:icountcheck.C

示例10: Trace

VOID Trace(TRACE trace, VOID *v)
{
    BOOL rewrite = false;
    
    for (BBL bbl = TRACE_BblHead(trace); BBL_Valid(bbl); bbl = BBL_Next(bbl))
    {
        for (INS ins = BBL_InsHead(bbl); INS_Valid(ins); ins = INS_Next(ins))
        {
            // If we see an instruction that needs rewriting, then rewrite all
            if (SwizzleRefs.find(INS_Address(ins)) != SwizzleRefs.end())
                rewrite = true;
        
            if (rewrite)
            {
                // If we suspect this instruction needs to be swizzled, generate safe, but slow code
                RewriteIns(ins);
            }
            else
            {
                // Generate code to check if swizzling is needed, but not do it
                CheckIns(ins, TRACE_Address(trace));
            }
        }
    }
}

开发者ID:telnetgmike，项目名称:arm-v7a-pintool，代码行数:25，代码来源:swizzle3.C

示例11: Trace

// Pin calls this function every time a new basic block is encountered
// It inserts a call to docount
VOID Trace(TRACE trace, VOID *v)
{
    // Visit every basic block in the trace
    for (BBL bbl = TRACE_BblHead(trace); BBL_Valid(bbl); bbl = BBL_Next(bbl))
    {
        for (INS ins = BBL_InsHead(bbl); INS_Valid(ins); ins = INS_Next(ins))
        {
            if (INS_IsMemoryRead(ins))
            {
                INS_InsertIfCall(ins, IPOINT_BEFORE, (AFUNPTR)ReadAlways, IARG_MEMORYREAD_EA, IARG_END);
                INS_InsertThenCall(ins, IPOINT_BEFORE, (AFUNPTR)ReadRare, IARG_MEMORYREAD_EA, IARG_END);
            }
        }
            
        // Always()->Rare() are partially inlined
        BBL_InsertIfCall(bbl,   IPOINT_BEFORE, (AFUNPTR)Always, IARG_END);
        BBL_InsertThenCall(bbl, IPOINT_BEFORE, (AFUNPTR)Rare, IARG_END);

        // Always()->Rare() are partially inlined
        BBL_InsertIfCall(bbl,   IPOINT_BEFORE, (AFUNPTR)AlwaysNoinline, IARG_END);
        BBL_InsertThenCall(bbl, IPOINT_BEFORE, (AFUNPTR)RareNoinline, IARG_END);

        // Noinline() is not inlined
        BBL_InsertCall(bbl, IPOINT_BEFORE, (AFUNPTR)Noinline, IARG_END);
    }
}

开发者ID:EmilyBragg，项目名称:profiling-tool，代码行数:28，代码来源:partialinline.cpp

示例12: Trace

// Pin calls this function every time a new instruction is encountered
void Trace(TRACE trace , void *v)
{
	for(BBL bbl= TRACE_BblHead(trace); BBL_Valid(bbl); bbl = BBL_Next(bbl)){
		for( INS ins = BBL_InsHead(bbl); INS_Valid(ins) ; ins =INS_Next(ins)){
			oepf.IsCurrentInOEP(ins);
		}
	}
}

开发者ID:fonstest，项目名称:PINTOOLS，代码行数:9，代码来源:MyPinTool.cpp

示例13: trace_inspect

/*
 * trace inspection (instrumentation function)
 *
 * traverse the basic blocks (BBLs) on the trace and
 * inspect every instruction for instrumenting it
 * accordingly
 *
 * @trace:      instructions trace; given by PIN
 * @v:		callback value
 */
static void
trace_inspect(TRACE trace, VOID *v)
{
	/* iterators */
	BBL bbl;
	INS ins;
	xed_iclass_enum_t ins_indx;
    //printf("dealing trace!\n");
	/* traverse all the BBLs in the trace */
	for (bbl = TRACE_BblHead(trace); BBL_Valid(bbl); bbl = BBL_Next(bbl)) {
		/* traverse all the instructions in the BBL */
		ins = BBL_InsHead(bbl);

		for (ins = BBL_InsHead(bbl);
				INS_Valid(ins);
				ins = INS_Next(ins)) {
			        /*
				 * use XED to decode the instruction and
				 * extract its opcode
				 */
				ins_indx = (xed_iclass_enum_t)INS_Opcode(ins);

				/*
				 * invoke the pre-ins instrumentation callback
				 */
				if (ins_desc[ins_indx].pre != NULL)
					ins_desc[ins_indx].pre(ins);

				/*
				 * analyze the instruction (default handler)
				 */
				if (ins_desc[ins_indx].dflact == INSDFL_ENABLE){
					ins_inspect(ins);
					//printf("dealing ins_inspect!\n");
				}


				/*
				 * invoke the post-ins instrumentation callback
				 */
				if (ins_desc[ins_indx].post != NULL)
					ins_desc[ins_indx].post(ins);
		}
	}
}

开发者ID:codenote，项目名称:dftwin，代码行数:55，代码来源:libdft_api.cpp

示例14: Trace

VOID Trace(TRACE trace, VOID *v)
{
    const INS beginIns = BBL_InsHead(TRACE_BblHead(trace));
    const INS endIns = BBL_InsTail(TRACE_BblTail(trace));
    const ADDRINT beginAddr = INS_Address(beginIns);
    const ADDRINT endAddr = INS_Address(endIns) + INS_Size(endIns) - 1;

    sandbox.CheckAddressRange(reinterpret_cast<const char *>(beginAddr), reinterpret_cast<const char *>(endAddr));
}

开发者ID:aarony，项目名称:arm-v7a-pintool，代码行数:9，代码来源:fence.C

示例15: BBLContainMemOp

bool BBLContainMemOp(BBL bbl) {
  for (INS ins = BBL_InsHead(bbl); INS_Valid(ins); ins = INS_Next(ins)) {
    if (INS_IsStackRead(ins) || INS_IsStackWrite(ins))
      continue;
    if (INS_IsMemoryRead(ins) || INS_IsMemoryWrite(ins))
      return true;
  }
  return false;
}

开发者ID:poeliu，项目名称:Pinso，代码行数:9，代码来源:pin_util.cpp

示例16: instrument_trace

 static void instrument_trace(TRACE trace, VOID *v)
 {
     sse_aligner_t* pthis = static_cast<sse_aligner_t*>(v);
     bool is_read = false;
     for (BBL bbl = TRACE_BblHead(trace); BBL_Valid(bbl); bbl = BBL_Next(bbl))
         for (INS ins = BBL_InsHead(bbl); INS_Valid(ins); ins = INS_Next(ins))
             if (check_for_sse_memop(ins, is_read, pthis))
                 rewrite_instruction(ins, is_read, pthis);
 }

开发者ID:alugupta，项目名称:resilient-systems，代码行数:9，代码来源:sse-unaligned-class.cpp

示例17: TraceInserted

VOID TraceInserted(TRACE trace, VOID *)
{
    for (BBL bbl = TRACE_BblHead(trace); BBL_Valid(bbl); bbl = BBL_Next(bbl))
    {
        for (INS ins = BBL_InsHead(bbl); INS_Valid(ins); ins = INS_Next(ins))
        {
            cacheInstructions++;
        }
    }
}

开发者ID:aarony，项目名称:arm-v7a-pintool，代码行数:10，代码来源:ccfp.C

示例18: Trace

VOID Trace(TRACE trace, VOID *v)
{
    // Instrument only at the head of the trace
    BBL bbl = TRACE_BblHead(trace);
    
    if (BBL_Valid(bbl))
    {
        INS_InsertCall(BBL_InsHead(bbl), IPOINT_BEFORE, (AFUNPTR)docount, IARG_UINT32, 1, IARG_END);
    }

    for (bbl = TRACE_BblHead(trace); BBL_Valid(bbl); bbl = BBL_Next(bbl))
    {
        for (INS ins = BBL_InsHead(bbl); INS_Valid(ins); ins = INS_Next(ins))
        {
            ASSERTX(INS_Size(ins) != 0);
        }
    }

}

开发者ID:andrewjinyounglee，项目名称:PerVERT，代码行数:19，代码来源:tracecount.cpp

示例19: Trace

VOID Trace(TRACE trace, VOID *v)
{
    for (BBL bbl = TRACE_BblHead(trace); BBL_Valid(bbl); bbl = BBL_Next(bbl))
    {
        for (INS ins = BBL_InsHead(bbl); INS_Valid(ins); ins = INS_Next(ins))
        {
            RewriteIns(ins);
        }
    }
}

开发者ID:gungun1010，项目名称:hidden，代码行数:10，代码来源:rewritememop.cpp

示例20: RecordRegisters

INT32 RecordRegisters(BBL bbl, UINT16 * stats)
{
    INT32 count = 0;
    
    for (INS ins = BBL_InsHead(bbl); INS_Valid(ins); ins = INS_Next(ins))
    {
        const UINT32 max_r = INS_MaxNumRRegs(ins);
    
        for( UINT32 i=0; i < max_r; i++ )
        {
            const REG reg =  INS_RegR(ins, i );
            if( REG_is_gr(reg) )
            {
                stats[count++] = REG_GetStatsIndex(reg,FALSE);
            }
#if 0
            // This is for arm
            else if( REG_is_aggregate(reg) )
            {
                REGSET regset = INS_RegAggregateR(ins);
                for( REG reg =  REGSET_PopNext(regset); REG_valid(reg); reg  =  REGSET_PopNext(regset) )
                {
                    stats[count++] = REG_GetStatsIndex(reg,FALSE);
                }
            }
#endif
        }

        const UINT32 max_w = INS_MaxNumWRegs(ins);            
        
        for( UINT32 i=0; i < max_w; i++ )
        {
            const REG reg =  INS_RegW(ins, i );
            if( REG_is_gr(reg) )
            {
                stats[count++] = REG_GetStatsIndex(reg,TRUE);
            }
#if 0
            else if( REG_is_aggregate(reg) )
            {
                REGSET regset = INS_RegAggregateW(ins);
                for( REG reg =  REGSET_PopNext(regset); REG_valid(reg); reg  =  REGSET_PopNext(regset) )
                {
                    stats[count++] = REG_GetStatsIndex(reg,TRUE);
                }
            }
#endif
        }
    }

    stats[count++] = 0;
    
    return count;
}

开发者ID:alagenchev，项目名称:school_code，代码行数:54，代码来源:regmix.cpp

注：本文中的BBL_InsHead函数示例整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。