环境:aix 7.1 ,oracle 12.1.0.2 rac -3节点。
硬件故障后,硬件工程师更换了内联网卡,不知为何资源VIP也有问题,只好先添加了VIP
srvctl add vip -node rac-wy1 -address rac-wy1-vip.nsn.com/255.255.255.0/en8
修改了下nodeapps
srvctl modify nodeapps -node rac-wy1 -address 10.48.186.99/255.255.255.0/en8
启动listener
srvctl start listener -node rac-wy1
报告故障。
--
查了不少资料,没有什么特别收获。
看了下grid下listener.ora中配置串出现问题,居然和gv$configured_interconnects中的不一致,也不知道那个狗蛋修改的!
不管了,先按照gv$的来修改吧,然后重启,结果ok!
-----
返回过来看,使用ifconfig -a查看:
rac-wy1.nsn.com:/oracle/app/12.1.0.2/grid/network/admin$ifconfig -a en13: flags=5e080863,18c0<UP,BROADCAST,NOTRAILERS,RUNNING,SIMPLEX,MULTICAST,GROUPRT,64BIT,CHECKSUM_OFFLOAD(ACTIVE),PSEG,LARGESEND,CHAIN> inet 192.168.240.24 netmask 0xffffff00 broadcast 192.168.240.255 tcp_sendspace 131072 tcp_recvspace 65536 rfc1323 1 en7: flags=1e080863,c0<UP,BROADCAST,NOTRAILERS,RUNNING,SIMPLEX,MULTICAST,GROUPRT,64BIT,CHECKSUM_OFFLOAD(ACTIVE),LARGESEND,CHAIN> inet 192.168.4.1 netmask 0xffffff00 broadcast 192.168.4.255 inet 169.254.214.140 netmask 0xffff8000 broadcast 169.254.255.255 tcp_sendspace 262144 tcp_recvspace 262144 rfc1323 1 en9: flags=1e084863,c0<UP,BROADCAST,NOTRAILERS,RUNNING,SIMPLEX,MULTICAST,GROUPRT,64BIT,CHECKSUM_OFFLOAD(ACTIVE),LARGESEND,CHAIN> inet 192.168.1.1 netmask 0xffffff00 broadcast 192.168.1.255 inet 169.254.39.147 netmask 0xffff8000 broadcast 169.254.127.255 tcp_sendspace 262144 tcp_recvspace 262144 rfc1323 1 en8: flags=1e084863,18c0<UP,BROADCAST,NOTRAILERS,RUNNING,SIMPLEX,MULTICAST,GROUPRT,64BIT,CHECKSUM_OFFLOAD(ACTIVE),LARGESEND,CHAIN> inet 10.48.186.96 netmask 0xffffff00 broadcast 10.48.186.255 inet 10.48.186.102 netmask 0xffffff00 broadcast 10.48.186.255 inet 10.48.186.99 netmask 0xffffff00 broadcast 10.48.186.255 tcp_sendspace 262144 tcp_recvspace 262144 rfc1323 1 lo0: flags=e08084b,c0<UP,BROADCAST,LOOPBACK,RUNNING,SIMPLEX,MULTICAST,GROUPRT,64BIT,LARGESEND,CHAIN> inet 127.0.0.1 netmask 0xff000000 broadcast 127.255.255.255 inet6 ::1%1/0 tcp_sendspace 131072 tcp_recvspace 131072 rfc1323 1
从这个看,public,vip,scan在一个网卡上;而私有(内联)的,居然和LISTENER在一个卡上(被更换的)。
按照推测,应该是更换网卡之后,修改了这个ip(不确定是系统自己分配的,还是工程师修改的),但是没有修改grid的listener.ora文件导致的。
看来以后得加强沟通了!
|
请发表评论